various esphome changes
This commit is contained in:
root
215
esphome/esp-downstbathswitch.yaml.changes
Normal file
215
esphome/esp-downstbathswitch.yaml.changes
Normal file
@@ -0,0 +1,215 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# DOWNSTAIRS BATHROOM MAIN LIGHTSWITCH
|
||||
# Zemismart KS-811 Triple push button
|
||||
#
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
#
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-downstbathswitch"
|
||||
friendly_name: "Downstairs Bath Lightswitch"
|
||||
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3)"
|
||||
|
||||
api_key: !secret esp-downstbathswitch_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-downstbathswitch_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstbathswitch_ip
|
||||
|
||||
update_interval: 60s # update time for for general sensors etc
|
||||
hold_threshold: "4000ms" # Hold threshold as a compile-time constant
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
globals:
|
||||
- id: single_click_delay
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '300000' # 5 minutes in ms
|
||||
- id: double_click_delay
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '1800000' # 30 minutes in ms
|
||||
- id: triple_click_delay
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '7200000' # 2 hours in ms
|
||||
- id: hold_threshold_val
|
||||
type: long
|
||||
restore_value: no
|
||||
initial_value: '4000' # 4 seconds in ms
|
||||
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button: Light Switch 1 (Main)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button: Light Switch 2 (Cabinet)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO04
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button: Extract Fan"
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(Relay_3).state) {
|
||||
ESP_LOGD("button3", "Single click: Relay_3 is on, turning it off.");
|
||||
id(Relay_3).turn_off();
|
||||
} else {
|
||||
ESP_LOGD("button3", "Single click: Relay_3 is off, turning it on for %d ms.", id(single_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(single_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
}
|
||||
# Double Click: two quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("button3", "Double click detected: turning Relay_3 on for %d ms.", id(double_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(double_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
# Triple Click: three quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("button3", "Triple click detected: turning Relay_3 on for %d ms.", id(triple_click_delay));
|
||||
id(Relay_3).turn_on();
|
||||
delay(id(triple_click_delay));
|
||||
id(Relay_3).turn_off();
|
||||
# Hold: button held for at least 4 seconds
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("button3", "Hold detected (threshold %d ms): turning Relay_3 on indefinitely.", id(hold_threshold_val));
|
||||
id(Relay_3).turn_on();
|
||||
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay: Main Light"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay: Cabinet Light"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay: Extract Fan"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
Reference in New Issue
Block a user