Edit esp-attobattery.yaml

esphome/esp-attobattery.yaml

@@ -1,9 +1,9 @@
 ##########################################################################################
 ##########################################################################################
-# BYD ATTO3 12V Battery Monitor 
-# Monitoring the status of a vehicle 12V battery with 
+# BYD ATTO3 12V Battery Monitor
+# Monitoring the status of a vehicle 12V battery with
 # an esp8266 (D1 Mini).  It will obviously only
-# transmit when the vehicle is within wifi range. 
+# transmit when the vehicle is within wifi range.
 # Voltage is measured with a resistor voltage divider
 # into the analogue GPIO on the esp8266.
 # https://zorruno.com/2022/vehicle-12v-battery-monitoring/
@@ -15,15 +15,15 @@
 # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
 ##########################################################################################
 substitutions:
-  # Device Naming 
+  # Device Naming
   device_name: "esp-attobattery"
   friendly_name: "Atto3 12V Battery Monitor"
   description_comment: "Atto3 12V Battery Monitor (when home)"
-  device_area: "Garage" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
+  device_area: "Garage" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
 
   # Project Naming
-  project_name: "Generic ESP8266.D1 Mini" # Project Details 
-  project_version: "v1.0"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+  project_name: "Generic ESP8266.D1 Mini" # Project Details
+  project_version: "v1.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
 
   # Passwords & Secrets
   api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
@@ -43,7 +43,7 @@ substitutions:
 
   wake_interval: "20s"
   sleep_interval: "300s"
-  mqtt_fail_sleep: "1h"   # If MQTT is unavailable after boot wait, sleep this long
+  mqtt_fail_sleep: "1h" # If MQTT is unavailable after boot wait, sleep this long
 
 ##########################################################################################
 # PACKAGES: Included Common Packages
@@ -70,16 +70,16 @@ packages:
     file: common/mqtt_common.yaml
     vars:
       local_device_name: "${device_name}"
-  
+
   #### WEB PORTAL ####
   common_webportal: !include common/webportal_common.yaml
-  
+
   #### SNTP (Only use if you want/need accurate timeclocks) ####
   #common_sntp:      !include common/sntp_common.yaml
 
   #### DIAGNOSTICS Sensors ####
-  diag_basic:       !include common/include_basic_diag_sensors.yaml
-  diag_more:        !include common/include_more_diag_sensors.yaml
+  diag_basic: !include common/include_basic_diag_sensors.yaml
+  diag_more: !include common/include_more_diag_sensors.yaml
   #diag_debug:       !include common/include_debug_diag_sensors.yaml
   #diag_resetcount:  !include common/include_resetcount_diag_sensors.yaml
 
@@ -112,7 +112,7 @@ esphome:
             - logger.log: "MQTT unreachable after 30s -> entering FALLBACK sleep for ${mqtt_fail_sleep}."
             - deep_sleep.enter:
                 id: deep_sleep_1
-                sleep_duration: ${mqtt_fail_sleep}   # override only this cycle
+                sleep_duration: ${mqtt_fail_sleep} # override only this cycle
           else:
             - logger.log: "MQTT connected; awaiting '${mqtt_command_topic}/deepsleep' command."
 
@@ -120,26 +120,26 @@ esphome:
 # ESP Platform and Framework
 # https://esphome.io/components/esp8266.html
 # https://esphome.io/components/esp32.html
-########################################################################################## 
+##########################################################################################
 esp8266:
   board: d1_mini
   framework:
-    version: latest #recommended, latest or dev
+    version: recommended # latest or dev
 
-##########################################################################################    
+##########################################################################################
 # ESPHome Logging Enable
 # https://esphome.io/components/logger.html
-########################################################################################## 
+##########################################################################################
 logger:
-  level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
+  level: "${log_level}" #INFO Level suggested, or DEBUG for testing
   #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
   #esp8266_store_log_strings_in_flash: false
   #tx_buffer_size: 64
 
-#############################################    
+#############################################
 # Enable Over the Air Update Capability
 # https://esphome.io/components/ota.html?highlight=ota
-#############################################  
+#############################################
 ota:
   - platform: web_server # Uncomment if you want to be able to do OTA with the web interface
 
@@ -176,9 +176,9 @@ mqtt:
 ##########################################################################################
 deep_sleep:
   id: deep_sleep_1
-  run_duration: ${wake_interval} 
-  sleep_duration: ${sleep_interval} 
-  
+  run_duration: ${wake_interval}
+  sleep_duration: ${sleep_interval}
+
 ##########################################################################################
 # SENSOR COMPONENT
 # https://esphome.io/components/sensor/
@@ -193,19 +193,19 @@ sensor:
     filters:
       - multiply: 3.3
       - calibrate_linear:
-        - 3.11 -> 14.00
-        - 3.00 -> 13.50
-        - 2.89 -> 13.00
-        - 2.77 -> 12.50
-        - 2.67 -> 12.00
-        - 2.55 -> 11.50
-        - 2.45 -> 11.00
-        - 2.34 -> 10.50
-        - 2.22 -> 10.00
-        - 2.11 -> 09.50
-        - 2.00 -> 09.00
-      - delta: 0.05      # publish immediately if change >= 0.05 V
-      - throttle: 2s     # avoid bursts if noisy
+          - 3.11 -> 14.00
+          - 3.00 -> 13.50
+          - 2.89 -> 13.00
+          - 2.77 -> 12.50
+          - 2.67 -> 12.00
+          - 2.55 -> 11.50
+          - 2.45 -> 11.00
+          - 2.34 -> 10.50
+          - 2.22 -> 10.00
+          - 2.11 -> 09.50
+          - 2.00 -> 09.00
+      - delta: 0.05 # publish immediately if change >= 0.05 V
+      - throttle: 2s # avoid bursts if noisy
     on_value:
       then:
         - mqtt.publish:
@@ -216,4 +216,3 @@ sensor:
               char buf[10];
               snprintf(buf, sizeof(buf), "%.2f", x);
               return std::string(buf);
-