zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

esphome updates

Browse Source
This commit is contained in:
root
2025-08-04 23:26:44 +12:00
parent ac887724a2
commit 42796bc46e
15 changed files with 1958 additions and 39 deletions
Download Patch File Download Diff File Expand all files Collapse all files

0
esphome/esp-maindishwasherspower.yaml → esphome/archive/esp-maindishwasherspower.yaml
View File

4
esphome/esp-poollightspower.yaml → esphome/archive/esp-poollightspower.yaml
View File

@@ -97,8 +97,8 @@ packages:
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_webportal: !include
file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:

2
esphome/common/network_common.yaml
View File

@@ -27,7 +27,7 @@ substitutions:
static_ip_dns2: !secret ha_wifi_dns2
# Network reconnect every x hours to ensure best access point
base_interval_hours: "6" # Base interval in hours
base_interval_hours: "23" # Base interval in hours
random_offset_max_minutes: "59" # Max random offset in minutes
#############################################

430
esphome/esp-6buttontest-pmb.yaml Normal file
View File

@@ -0,0 +1,430 @@
##########################################################################################
##########################################################################################
# PMB Electronics 6 Button ESP32 Switch
# V1.0 2025-08-04 Initial Version
##########################################################################################
# PMB Details Page https://rcbeacon.com/blog/?p=5488
# NOTES
# 1. To Flash via ESPHome, you likely have to connect to the computer, start the flash
# process then hold down the I00 button. I think GPIO12 is preventing the flash process
# 2. OTA flash to an Existing Tasmota device is likely a bit hard with and ESP32 as they
# expect a signed Tasmota binary... and partition layout needs to be fixed anyway
#
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace "!secret my_key" with the password etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-6buttontest-pmb" #the filename should be the device_name.yaml
friendly_name: "PMB Light Switch Test"
description_comment: "Multi Button Wallswitch in standard AU/NZ flush size. 5 Buttons with LEDs and one Knob"
device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Passwords
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-6buttontest-pmb_ip
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
pwm_freq: "1000Hz"
ledc_bits: "12"
# Switch Naming
switch_1_name: "Red"
switch_2_name: "White"
switch_3_name: "Green"
switch_4_name: "Orange"
switch_5_name: "Blue"
switch_5b_name: "Blue (Double)"
switch_5c_name: "Blue (Hold)"
# switch_6_name: "Spare"
variable_1_name: "Dimmer"
variable_1_full_scale: "3.14" # ADC reading when at 100% (adjust after calibration)
variable_1_min_scale: "0.14" # volts at ADC for 0% (adjust after calibration)
##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
#############################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
esphome:
name: ${device_name}
friendly_name: ${friendly_name}
comment: ${description_comment} # Appears on the esphome page in HA
area: ${device_area}
##########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
##########################################################################################
# Suggest using ESP-IDF Framework. Changes might need need to be cable flashed here to
# reset the partitioning
##########################################################################################
esp32:
board: esp32dev
framework:
type: esp-idf # "esp-idf" OR "arduino".
version: recommended # recommended, latest or dev
preferences:
flash_write_interval: 5min # not too important but anything written for reboot mem will wear the flash
#############################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
#############################################
logger:
level: ${log_level} #INFO Level suggested, or DEBUG for testing
##########################################################################################
# STATUS LED
# https://esphome.io/components/status_led.html
##########################################################################################
# This is usually the blue LED on the ESP32 Dev board
# Status_LED can show ESPHome errors and warnings
##########################################################################################
status_led:
pin:
number: GPIO2
inverted: yes
##########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
##########################################################################################
# These are the input buttons on GPIO.
# No "mode: INPUT_PULLUP" needed as they have external pullups
# Switches pull to GND so "inverted:true" for espHome to report ON when pressed.
# They will toggle the virtual relays when pressed (the vrelays will toggle the LEDs)
##########################################################################################
binary_sensor:
- platform: gpio
pin:
number: GPIO19
mode: INPUT
inverted: true
name: "Button 1: ${switch_1_name}"
filters:
- delayed_on: 50ms
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_1
- platform: gpio
pin:
number: GPIO35
mode: INPUT
inverted: true
name: "Button 2: ${switch_2_name}"
filters:
- delayed_on: 50ms
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_2
- platform: gpio
pin:
number: GPIO05
mode: INPUT
inverted: true
name: "Button 3: ${switch_3_name}"
filters:
- delayed_on: 50ms
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_3
- platform: gpio
pin:
number: GPIO33
mode: INPUT
inverted: true
name: "Button 4: ${switch_4_name}"
filters:
- delayed_on: 50ms
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_4
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: true
name: "Button 5: ${switch_5_name}"
# No delayed_on/off here to allow accurate multi-click timing
on_multi_click:
# Double click first
- timing:
- ON for 50ms to 500ms
- OFF for 50ms to 500ms
- ON for 50ms to 500ms
then:
- switch.toggle: vrelay_5b
# Hold
- timing:
- ON for at least 2s
then:
- switch.toggle: vrelay_5c
# Single click
- timing:
- ON for 50ms to 500ms
- OFF for at least 300ms
then:
- switch.toggle: vrelay_5
#- platform: gpio
# pin:
# number: GPIO12
# mode: INPUT
# inverted: true
# name: "Button 6: ${switch_6_name}"
# filters:
# - delayed_on: 50ms
# - delayed_off: 50ms
# on_press:
# - switch.toggle: vrelay_6
##########################################################################################
# OUTPUT COMPONENT
# https://esphome.io/components/light/index.html
##########################################################################################
# An OUTPUT can be binary (0,1) or float, which is any value between 0 and 1.
# PWM Outputs such as "ledc" are float. https://esphome.io/components/output/ledc.html
# We could change frequency: "100Hz" and/or resolution: "12", but these are the default.
##########################################################################################
output:
- platform: ledc
id: led1_output
pin: GPIO21
frequency: ${pwm_freq}
- platform: ledc
id: led2_output
pin: GPIO25
frequency: ${pwm_freq}
- platform: ledc
id: led3_output
pin: GPIO18
frequency: ${pwm_freq}
- platform: ledc
id: led4_output
pin: GPIO26
frequency: ${pwm_freq}
- platform: ledc
id: led5_output
pin: GPIO17
frequency: ${pwm_freq}
##########################################################################################
# LIGHT COMPONENT
# https://esphome.io/components/light/index.html
##########################################################################################
# We are just going to use simple monochromatic component as only one colour to PWM control
# This doesn't actually do anything by itself, you need to tied it to an OUTPUT component.
##########################################################################################
light:
- platform: monochromatic
id: led1
output: led1_output
name: "LED 1: ${switch_1_name}"
- platform: monochromatic
id: led2
output: led2_output
name: "LED 2: ${switch_2_name}"
- platform: monochromatic
id: led3
output: led3_output
name: "LED 3: ${switch_3_name}"
- platform: monochromatic
id: led4
output: led4_output
name: "LED 4: ${switch_4_name}"
- platform: monochromatic
id: led5
output: led5_output
name: "LED 5: ${switch_5_name}"
effects:
- strobe:
name: "Pulse 0.5s"
colors:
- state: ON
brightness: 100%
duration: 500ms
- state: OFF
duration: 500ms
##########################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
##########################################################################################
# Normally SWITCH would be for things like a relay output and turning that on and off.
# We are using it for virtual relays, that show up in Home Assistant etc, and toggling
# them along with the LEDs when the buttons are pressed.
# Separating them from the LEDs as outputs means we can do thinks like light blinking etc
# but still leave the switch outputs toggled on or off.
##########################################################################################
switch:
- platform: template
name: "Output 1: ${switch_1_name}"
id: vrelay_1
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- light.turn_on: led1
turn_off_action:
- light.turn_off: led1
- platform: template
name: "Output 2: ${switch_2_name}"
id: vrelay_2
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- light.turn_on: led2
turn_off_action:
- light.turn_off: led2
- platform: template
name: "Output 3: ${switch_3_name}"
id: vrelay_3
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- light.turn_on: led3
turn_off_action:
- light.turn_off: led3
- platform: template
name: "Output 4: ${switch_4_name}"
id: vrelay_4
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- light.turn_on: led4
turn_off_action:
- light.turn_off: led4
- platform: template
name: "Output 5: ${switch_5_name}"
id: vrelay_5
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- light.turn_on: led5
turn_off_action:
- light.turn_off: led5
- platform: template
name: "Output 5B: ${switch_5b_name}"
id: vrelay_5b
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- logger.log: "vrelay_5b ON"
turn_off_action:
- logger.log: "vrelay_5b OFF"
- platform: template
name: "Output 5C: ${switch_5c_name}"
id: vrelay_5c
restore_mode: RESTORE_DEFAULT_OFF
turn_on_action:
- light.turn_on:
id: led1
effect: "Pulse 0.5s"
turn_off_action:
- light.turn_off: led1
#- platform: template
# name: "Output 6: ${switch_6_name}"
# id: vrelay_6
# restore_mode: RESTORE_DEFAULT_OFF
# optimistic: false
# turn_on_action:
# - light.turn_on: led6
# turn_off_action:
# - light.turn_off: led6
sensor:
# Raw ADC reading from GPIO36
- platform: adc
pin: GPIO36
id: dimmer_raw
name: "Dimmer Raw"
attenuation: 11db
update_interval: 0.5s
on_value:
then:
- lambda: |-
// Convert raw ADC (x) to volts
float volts = x;
// Apply min/max calibration
float min_v = ${variable_1_min_scale};
float max_v = ${variable_1_full_scale};
// Calculate percentage between min and max
float pct = ((volts - min_v) / (max_v - min_v)) * 100.0;
// Clamp result between 0 and 100
if (pct > 100.0) pct = 100.0;
if (pct < 0.0) pct = 0.0;
// Publish to percentage sensor
id(dimmer_percent).publish_state(pct);
# Percentage sensor derived from raw ADC
- platform: template
id: dimmer_percent
name: "${variable_1_name}"
unit_of_measurement: "%"
accuracy_decimals: 0
# External supply voltage from GPIO39
- platform: adc
pin: GPIO39
name: "External Supply Voltage"
id: supply_voltage
attenuation: 11db # Up to ~3.9V at ADC pin
update_interval: 2s
filters:
- calibrate_linear:
# Format: raw_value -> real_voltage_at_pin
- 0.80 -> 3.20 # Example: ADC reads 0.80 when pin is actually 3.20V
- 0.90 -> 3.60 # Example: ADC reads 0.90 when pin is actually 3.60V
- 1.00 -> 4.00 # Example: ADC reads 1.00 when pin is actually 4.00V
- multiply: 4.00 # Voltage divider ratio
unit_of_measurement: "V"

14
esphome/esp-bedrm2ceilingfan.yaml
View File

@@ -103,13 +103,13 @@ esphome:
priority : -100
then:
- delay: 200ms
- fan.toggle: ifan02_fan
- fan.toggle: ifan02_fan
- delay: 200ms
- light.toggle: ifan02_light
- delay: 1ms
- light.toggle: ifan02_light
- delay: 1s
#- fan.toggle: ifan02_fan
#- fan.toggle: ifan02_fan
#- delay: 200ms
#- light.toggle: ifan02_light
#- delay: 1ms
#- light.toggle: ifan02_light
#- delay: 1s
- mqtt.publish:
topic: "${mqtt_local_status_topic}/speed/state"
payload: !lambda 'return to_string(id(speed_value));'

2
esphome/esp-downstbedrm1lights.yaml
View File

@@ -122,7 +122,7 @@ logger:
#########################################################################################
status_led:
pin:
number: GPIO2
number: GPIO02
inverted: yes
#########################################################################################

8
esphome/esp-downstbedrm2lights.yaml
View File

@@ -122,7 +122,7 @@ logger:
#########################################################################################
status_led:
pin:
number: GPIO2
number: GPIO02
inverted: yes
#########################################################################################
@@ -134,7 +134,7 @@ binary_sensor:
# it is a single button KS-811 in which case it is GPIO00
- platform: gpio
pin:
number: GPIO00
number: GPIO0
mode: INPUT
inverted: True
name: "Button 1: ${switch_1_name}"
@@ -166,10 +166,10 @@ binary_sensor:
# https://esphome.io/components/switch/
#########################################################################################
switch:
# GPIO13 for KS-811 first button
# GPIO13 for KS-811 first button UNLESS it is KS-811-1 then it is GIPO12
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
pin: GPIO12
id: Relay_1
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)

224
esphome/esp-downstloungeentry.yaml Normal file
View File

@@ -0,0 +1,224 @@
##########################################################################################
##########################################################################################
# DOwNSTAIRS BEDROOM 2 LIGHTSWITCH
# V3.6 2025-07-24 YAML tidyups
##########################################################################################
# Zemismart KS-811 Single push button
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#
# NOTES
# -
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-downstloungeentry"
friendly_name: "Downstairs Lounge Entry Lightswitch (1)"
description_comment: "Downstairs Lounge Entry Lightswitch using a Zemismart KS-811 Single Push Button. Main Lights (1)"
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Single" # Project Details
project_version: "v3.6" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords & Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-downstloungeentry_ip
mqtt_command_main_topic: !secret mqtt_local_command_main_topic
mqtt_status_main_topic: !secret mqtt_local_status_main_topic
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT LOCAL Controls
#mqtt_device_name: "downst-lounge-entry-light"
#mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
#mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
# MQTT REMOTE Controls
mqtt_remote_device_name: "downst-lounge-main-lights"
mqtt_remote_device_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}/light1/set"
mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}/light1/state" # Topic we will use to view status locally without HA
mqtt_remote_device_command_on: "On"
mqtt_remote_device_command_off: "Off"
# Switch/Relay/Button Naming & Icons
#relay_icon: "mdi:lightbulb-group"
switch_1_name: "Main Lights" # NOTE there is no physical connection to the lights on this switch
#switch_2_name: "Nil"
#switch_3_name: "Nil"
#########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
#########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
#########################################################################################
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#on_boot:
# priority: 200
# then:
# - switch.turn_on: Relay_2
#########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#########################################################################################
esp8266:
board: esp01_1m
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
board_flash_mode: dout # Default is dout
#########################################################################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
#############################################
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
##########################################################################################
# MQTT COMMANDS
# This adds device-specific MQTT command triggers to the common MQTT configuration.
##########################################################################################
mqtt:
on_message:
- topic: "${mqtt_remote_status_topic}"
payload: "${mqtt_remote_device_command_on}"
then:
- delay: 50ms
- if:
condition:
lambda: 'return !id(Relay_1).state;' # Only turn on if currently OFF
then:
- switch.turn_on: Relay_1
- topic: "${mqtt_remote_status_topic}"
payload: "${mqtt_remote_device_command_off}"
then:
- delay: 50ms
- if:
condition:
lambda: 'return id(Relay_1).state;' # Only turn off if currently ON
then:
- switch.turn_off: Relay_1
#########################################################################################
# STATUS LED
# https://esphome.io/components/status_led.html
#########################################################################################
status_led:
pin:
number: GPIO02
inverted: yes
#########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#########################################################################################
binary_sensor:
# GPIO16 for KS-811 first button UNLESS it is KS-811-1 in which case it is GPIO00
- platform: gpio
pin:
number: GPIO0
mode: INPUT
inverted: True
name: "Button 1: ${switch_1_name}"
on_press:
- mqtt.publish:
topic: "${mqtt_remote_device_command_topic}"
payload: !lambda |-
if (id(Relay_1).state) {
return "${mqtt_remote_device_command_off}";
} else {
return "${mqtt_remote_device_command_on}";
}
# GPIO05 for second button (only for KS-811-2 Double or -3 Triple)
# - platform: gpio
# pin:
# number: GPIO05
# mode: INPUT
# inverted: True
# name: "Button 2: ${switch_2_name}"
# on_press:
# - switch.toggle: Relay_2
# GPIO04 for third button (only for KS-811-3 Triple)
# - platform: gpio
# pin:
# number: GPIO4
# mode: INPUT
# inverted: True
# name: "Button 3: ${switch_3_name}"
# on_press:
# - switch.toggle: Relay_3
#########################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#########################################################################################
switch:
# GPIO13 for KS-811 first button UNLESS it is KS-811-1 then it is GPIO12
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO12
id: Relay_1
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)
# - platform: gpio
# name: "Relay 2: ${switch_2_name}"
# pin: GPIO12
# id: Relay_2
# GPIO14 for third relay (only for KS-811-3 Triple)
# - platform: gpio
# name: "Relay 3: ${switch_3_name}"
# pin: GPIO14
# id: Relay_3

221
esphome/esp-downstloungemain.yaml Normal file
View File

@@ -0,0 +1,221 @@
##########################################################################################
##########################################################################################
# DOWNSTAIRS LOUNGE MAIN LIGHTS
# V3.5 2025-07-28 YAML tidyups
##########################################################################################
# Zemismart KS-811 Triple push button
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#
# NOTES
# -
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-downstloungemain"
friendly_name: "Downstairs Lounge Main Lightswitch (3)"
description_comment: "Downstairs Bedroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Back Wall Lights (2), Spare (3)"
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
project_version: "v3.5" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords & Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-downstloungemain_ip
mqtt_command_main_topic: !secret mqtt_local_command_main_topic
mqtt_status_main_topic: !secret mqtt_local_status_main_topic
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT LOCAL Controls
mqtt_device_name: "downst-lounge-main-lights"
mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
# MQTT REMOTE Controls
# Switch/Relay/Button Naming & Icons
#relay_icon: "mdi:lightbulb-group"
switch_1_name: "Main Lights"
switch_2_name: "Back Wall Lights"
switch_3_name: "Spare" # NOTE, Nothing connected to this switch output
#########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
#########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
#########################################################################################
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#on_boot:
# priority: 200
# then:
# - switch.turn_on: Relay_2
#########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#########################################################################################
esp8266:
board: esp01_1m
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
board_flash_mode: dout # Default is dout
#########################################################################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
#############################################
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
##########################################################################################
# MQTT COMMANDS
# This adds device-specific MQTT command triggers to the common MQTT configuration.
##########################################################################################
mqtt:
on_message:
# Light control
- topic: "${mqtt_local_command_topic}/light1/set"
payload: "On"
then:
- switch.turn_on: Relay_1
- topic: "${mqtt_local_command_topic}/light1/set"
payload: "Off"
then:
- switch.turn_off: Relay_1
#########################################################################################
# STATUS LED
# https://esphome.io/components/status_led.html
#########################################################################################
status_led:
pin:
number: GPIO02
inverted: yes
#########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#########################################################################################
binary_sensor:
# GPIO16 for KS-811 first button UNLESS
# it is a single button KS-811 in which case it is GPIO00
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: True
name: "Button 1: ${switch_1_name}"
on_press:
- switch.toggle: Relay_1
# - mqtt.publish:
# topic: "${mqtt_local_command_topic}"
# payload: !lambda |-
# if (id(Relay_1).state) {
# return "${mqtt_local_command_off}";
# } else {
# return "${mqtt_local_command_on}";
# }
# GPIO05 for second button (only for KS-811-2 Double or -3 Triple)
- platform: gpio
pin:
number: GPIO05
mode: INPUT
inverted: True
name: "Button 2: ${switch_2_name}"
on_press:
- switch.toggle: Relay_2
# GPIO04 for third button (only for KS-811-3 Triple)
- platform: gpio
pin:
number: GPIO4
mode: INPUT
inverted: True
name: "Button 3: ${switch_3_name}"
on_press:
- switch.toggle: Relay_3
#########################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#########################################################################################
switch:
# GPIO13 for KS-811 first button UNLESS it is KS-811-1 then it is GIPO12
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
# publish status updates when the light turns on/off:
on_turn_on:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/light1/state"
payload: "On"
on_turn_off:
- mqtt.publish:
topic: "${mqtt_local_status_topic}/light1/state"
payload: "Off"
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
# GPIO14 for third relay (only for KS-811-3 Triple)
- platform: gpio
name: "Relay 3: ${switch_3_name}"
pin: GPIO14
id: Relay_3

187
esphome/esp-downstloungeoutside.yaml Normal file
View File

@@ -0,0 +1,187 @@
##########################################################################################
##########################################################################################
# DOwNSTAIRS BEDROOM 2 LIGHTSWITCH
# V3.5 2025-07-24 YAML tidyups
##########################################################################################
# Zemismart KS-811 Double push button
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#
# NOTES
# -
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-downstloungeoutside"
friendly_name: "Downstairs Lounge Outside Lights (2)"
description_comment: "Downstairs Lounge Outside Lightswitch using a Zemismart KS-811 Double Push Button. Outside Lights (1), Spare (2)"
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
project_version: "v3.5" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords & Secrets
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-downstloungeoutside_ip
#mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
#mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# MQTT LOCAL Controls
#mqtt_device_name: "downst-bedroom2-lights"
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
# MQTT REMOTE Controls
# Switch/Relay/Button Naming & Icons
#relay_icon: "mdi:lightbulb-group"
switch_1_name: "Outside Lights"
switch_2_name: "Spare"
#switch_3_name: "Nil"
#########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
#########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
#########################################################################################
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" # Appears on the esphome page in HA
area: "${device_area}"
project:
name: "${project_name}"
version: "${project_version}"
#on_boot:
# priority: 200
# then:
# - switch.turn_on: Relay_2
#########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#########################################################################################
esp8266:
board: esp01_1m
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
board_flash_mode: dout # Default is dout
#########################################################################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
#############################################
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
#########################################################################################
# STATUS LED
# https://esphome.io/components/status_led.html
#########################################################################################
status_led:
pin:
number: GPIO2
inverted: yes
#########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#########################################################################################
binary_sensor:
# GPIO16 for KS-811 first button UNLESS
# it is a single button KS-811 in which case it is GPIO00
- platform: gpio
pin:
number: GPIO16
mode: INPUT
inverted: True
name: "Button 1: ${switch_1_name}"
on_press:
- switch.toggle: Relay_1
# GPIO05 for second button (only for KS-811-2 Double or -3 Triple)
- platform: gpio
pin:
number: GPIO05
mode: INPUT
inverted: True
name: "Button 2: ${switch_2_name}"
on_press:
- switch.toggle: Relay_2
# GPIO04 for third button (only for KS-811-3 Triple)
# - platform: gpio
# pin:
# number: GPIO4
# mode: INPUT
# inverted: True
# name: "Button 3: ${switch_3_name}"
# on_press:
# - switch.toggle: Relay_3
#########################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#########################################################################################
switch:
# GPIO13 for KS-811 first button
- platform: gpio
name: "Relay 1: ${switch_1_name}"
pin: GPIO13
id: Relay_1
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)
- platform: gpio
name: "Relay 2: ${switch_2_name}"
pin: GPIO12
id: Relay_2
# GPIO14 for third relay (only for KS-811-3 Triple)
# - platform: gpio
# name: "Relay 3: ${switch_3_name}"
# pin: GPIO14
# id: Relay_3

166
esphome/esp-maindishwasherpower.yaml Normal file
View File

@@ -0,0 +1,166 @@
##########################################################################################
##########################################################################################
# MAIN DISHWASHER POWER
# Controlled by a Athom Smart Plug V3
# package_import_url: github://athom-tech/athom-configs/athom-smart-plug.yaml
#
# V3.4 2025-07-30 Changed to Athom V3
# V1.1 2025-06-12 package added for energy entities
# V1.0 2025-06-10 YAML Tidyups
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-maindishwasherpower"
friendly_name: "Main Dishwasher Power"
description_comment: "Main Dishwasher Power Monitor :: Athom Smart Plug Power Monitor V3"
device_area: "Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Athom Technology.Smart Plug V3" # Project Details
project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords
api_key: !secret esp-maindishwasherpower_api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-maindishwasherpower_ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-maindishwasherpower_ip
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
# Device Settings
relay_icon: "mdi:dishwasher"
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
# Device Specific included packages
common_athompowermonV3: !include
file: common/athompowermonv3_common.yaml
vars:
local_current_limit: "${current_limit}"
##########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
##########################################################################################
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" #Appears on the esphome page in HA
area: "${device_area}"
name_add_mac_suffix: False
min_version: 2024.6.0
project:
name: "${project_name}"
version: "${project_version}"
platformio_options:
board_build.mcu: esp32c3
board_build.variant: esp32c3
board_build.flash_mode: dio
on_boot:
priority: 200
then:
- switch.turn_on: "relay"
##########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
##########################################################################################
esp32:
board: esp32-c3-devkitm-1
flash_size: 4MB
variant: ESP32C3
framework:
type: esp-idf # "esp-idf" OR "arduino". Suggested ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang.
version: recommended # recommended, latest or dev
preferences:
flash_write_interval: 5min
esp32_improv:
authorizer: none
##########################################################################################
# ESPHome LOGGING
# https://esphome.io/components/logger.html
##########################################################################################
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
##########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
##########################################################################################
binary_sensor:
- platform: gpio
pin:
number: GPIO03
mode: INPUT_PULLUP
inverted: true
name: "Power Button"
id: power_button
filters:
- delayed_on: 20ms
on_click:
- min_length: 20ms
max_length: 500ms
then:
- switch.toggle:
id: relay
- platform: template
name: "Relay Status"
lambda: |-
return id(relay).state;
#################################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#################################################################################################
switch:
- platform: gpio
name: "Power Output"
pin: GPIO05
id: relay
restore_mode: RESTORE_DEFAULT_ON # Ensures the relay is restored (or off) at boot
#internal: true # Hides the switch from Home Assistant
icon: "${relay_icon}"

693
esphome/esp-poollightpower.yaml Normal file
View File

@@ -0,0 +1,693 @@
##########################################################################################
##########################################################################################
# POOL LIGHT POWER AND TIMER
# Controlled by a Athom Smart Plug V1
#
# dashboard_import:
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
#
# V2.4 2025-06-15 Changed back to an Athom V1 (esp8266)
# V2.3 2025-06-15 Changed to an Athom V3 (esp32)
# V2.2 2025-06-14 Fixes to offline time when sntp/network unavailable
# V2.1 2025-06-12 Added select and button to chose modes, added countdown & startup to boost
# V2.0 2025-06-05 YAML Tidyups
#
# INSTRUCTIONS
# - It allows the device to work in a standalone timer style operation
# - The timer has a morning and evening time (but no weekday/weekend settings)
# - Default values are set, but changed values are remembered in flash
# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
# - If on a network and there is a MQTT server, you can set the on/off times via MQTT (See below commands)
# - You can set 4 modes ON/OFF/TIMER/BOOST via MQTT. Setting BOOST gives you a oneshot operation
# - Any new timer times set via MQTT will be remembered though a reboot
# - On startup, or a reboot, the device will always turn on for the BOOST Duration (BOOST mode, default 2 hours)
# - TIMER mode will always be switched on after BOOST mode is complete
# - Home Assistant entities are set so that BOOST mode can be pressed with a button and other modes selectable with a dropdown
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 30 seconds (with ~2 secs in between to allow it to boot)
#
# MQTT Commands
# Values will be set in place on the update_interval time, not immediately
# Use 00:00 in 24hr format for time setting. (Note there is no weekday/weekend setting)
# mqtt_timer_topic/morning-on/06:00 : Time device will go on
# mqtt_timer_topic/morning-off/08:00 : Time device will go off
# mqtt_timer_topic/evening-on/09:00 : Time device will go on
# mqtt_timer_topic/evening-off/00:00 : Time device will go off
# mqtt_timer_topic/boost-time/0000 : Time in minutes device will temporarily go on for (1-1439)
# mqtt_timer_topic/operation/ON : Device permanently on
# mqtt_timer_topic/operation/OFF : Device permanently off
# mqtt_timer_topic/operation/TIMER : Device will obey timer settings
# mqtt_timer_topic/operation/BOOST : Turn on for (boost_duration) minutes then BOOST (also on startup)
#
# operation_mode:
# 0 = OFF
# 1 = ON
# 2 = TIMER
# 3 = BOOST
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-poollightpower"
friendly_name: "Pool Light Power"
description_comment: "Pool Light Power :: Athom Smart Plug Power V1"
device_area: "Outside" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Project Naming
project_name: "Athom Technology.Smart Plug V1" # Project Details
project_version: "v2.4" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
# Passwords
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-poollightpower_ip
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "10s" # update time for for general sensors etc
# Device Settings
relay_icon: "mdi:power-socket-au"
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
mqtt_timer_topic: "viewroad-commands/poollight-timer" # Topics you will use to change stuff
boost_duration_default: "180" # Minutes to stay ON in BOOST mode before reverting to TIMER
morning_on_default: "450" # Default in minutes from midnight. Default 07:30 => 450
morning_off_default: "450" # Default in minutes from midnight. Default 07:30 => 450 (same as ON as no need for morning schedule)
evening_on_default: "1140" # Default in minutes from midnight. Default 19:00 => 1140
evening_off_default: "1350" # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
# Device Specific included packages
common_athompowermonV1: !include
file: common/athompowermonv1_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_current_limit: "${current_limit}"
##########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
##########################################################################################
esphome:
name: "${device_name}"
friendly_name: "${friendly_name}"
comment: "${description_comment}" #Appears on the esphome page in HA
area: "${device_area}"
name_add_mac_suffix: False
min_version: 2024.6.0
project:
name: "${project_name}"
version: "${project_version}"
##########################################################################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
##########################################################################################
esp8266:
board: esp8285
restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
preferences:
flash_write_interval: 10min
mdns:
disabled: false
##########################################################################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
##########################################################################################
logger:
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
#esp8266_store_log_strings_in_flash: false
#tx_buffer_size: 64
##########################################################################################
# Global Variables for use in automations etc
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
##########################################################################################
globals:
# Tracks the time (in seconds from midnight) at the previous boot
- id: last_boot_time_s
type: int
restore_value: true
initial_value: "0"
# Counts how many consecutive boots have occurred (within X seconds)
- id: boot_count
type: int
restore_value: true
initial_value: "0"
# Morning On time (minutes from midnight),
- id: morning_on
type: int
restore_value: true
initial_value: "${morning_on_default}"
# Morning Off time (minutes from midnight),
- id: morning_off
type: int
restore_value: true
initial_value: "${morning_off_default}"
# Evening On time (minutes from midnight),
- id: evening_on
type: int
restore_value: true
initial_value: "${evening_on_default}"
# Evening Off time (minutes from midnight),
- id: evening_off
type: int
restore_value: true
initial_value: "${evening_off_default}"
# Boost Duration (minutes),
- id: boost_duration
type: int
restore_value: true
initial_value: "${boost_duration_default}"
####################################################
# operation_mode:
# 0 = OFF
# 1 = ON
# 2 = TIMER
# 3 = BOOST
####################################################
- id: operation_mode
type: int
restore_value: true
initial_value: "2"
####################################################
# current_mins is set if SNTP is invalid.
# We assume user powers on the device at 12:00 noon
# => 12 * 60 = 720 minutes from midnight.
####################################################
- id: current_mins
type: int
restore_value: true
initial_value: "720" # 720 is 12:00 Noon
####################################################
# boost_timer: counts minutes in BOOST mode
# After 'boost_duration' minutes, revert to TIMER.
####################################################
- id: boost_timer
type: int
restore_value: true
initial_value: "0"
##########################################################################################
# Text Sensors
# https://esphome.io/components/text_sensor/index.html
##########################################################################################
text_sensor:
############################
# MQTT Subscriptions
############################
####################################################
# Subscribe to the Morning On time, format "HH:MM"
# We check x.size() == 5 and x[2] == ':',
# then parse x.substr(0,2) and x.substr(3,2)
# std::string uses 'substr', not 'substring'.
####################################################
- platform: mqtt_subscribe
name: "Morning On Time Setting"
id: morning_on_topic
topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
internal: True
on_value:
then:
- lambda: |-
// Expect "HH:MM" => total length = 5, with ':'
if (x.size() == 5 && x[2] == ':') {
int hour = atoi(x.substr(0, 2).c_str()); // "HH"
int minute = atoi(x.substr(3, 2).c_str()); // "MM"
id(morning_on) = hour * 60 + minute;
ESP_LOGI("timer","Received new Morning On: %02d:%02d", hour, minute);
} else {
ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
}
####################################################
# Morning Off time => "HH:MM"
####################################################
- platform: mqtt_subscribe
name: "Morning Off Time Setting"
id: morning_off_topic
topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
on_value:
then:
- lambda: |-
if (x.size() == 5 && x[2] == ':') {
int hour = atoi(x.substr(0, 2).c_str());
int minute = atoi(x.substr(3, 2).c_str());
id(morning_off) = hour * 60 + minute;
ESP_LOGI("timer","Received new Morning Off: %02d:%02d", hour, minute);
} else {
ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
}
####################################################
# Evening On time => "HH:MM"
####################################################
- platform: mqtt_subscribe
name: "Evening On Time Setting"
id: evening_on_topic
topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
on_value:
then:
- lambda: |-
if (x.size() == 5 && x[2] == ':') {
int hour = atoi(x.substr(0, 2).c_str());
int minute = atoi(x.substr(3, 2).c_str());
id(evening_on) = hour * 60 + minute;
ESP_LOGI("timer","Received new Evening On: %02d:%02d", hour, minute);
} else {
ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
}
####################################################
# Evening Off time => "HH:MM"
####################################################
- platform: mqtt_subscribe
name: "Evening Off Time Setting"
id: evening_off_topic
topic: "${mqtt_timer_topic}/evening-off" # Stored in the format HH:MM
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
on_value:
then:
- lambda: |-
if (x.size() == 5 && x[2] == ':') {
int hour = atoi(x.substr(0, 2).c_str());
int minute = atoi(x.substr(3, 2).c_str());
id(evening_off) = hour * 60 + minute;
ESP_LOGI("timer","Received new Evening Off: %02d:%02d", hour, minute);
} else {
ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
}
####################################################
# Boost duration => 1 - 1439
####################################################
- platform: mqtt_subscribe
name: "Boost Duration"
id: boost_time_topic
topic: "${mqtt_timer_topic}/boost-time" # Stored as an integer from 1-1439
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
on_value:
then:
- lambda: |-
// parse as integer
char *endptr;
long v = strtol(x.c_str(), &endptr, 10);
// invalid if nothing parsed, trailing chars, or out of 0–1439
if (endptr == x.c_str() || *endptr != '\0' || v < 0 || v > 1439) {
ESP_LOGE("boost_time", "Invalid boost_time '%s'", x.c_str());
} else {
id(boost_duration) = static_cast<int>(v);
}
####################################################
# Subscribe to operation mode:
# OFF, ON, TIMER, BOOST
# We do case-insensitive compare using strcasecmp
# (Requires <strings.h> typically included in ESPHome)
####################################################
# MQTT subscription: set mode, then immediately re-evaluate relay
- platform: mqtt_subscribe
id: timer_operation_mode_topic
topic: "${mqtt_timer_topic}/operation"
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
on_value:
then:
- lambda: |-
if (strcasecmp(x.c_str(), "TIMER") == 0) {
id(operation_mode) = 2;
ESP_LOGI("timer","Operation mode set to TIMER");
} else if (strcasecmp(x.c_str(), "ON") == 0) {
id(operation_mode) = 1;
ESP_LOGI("timer","Operation mode set to ON");
} else if (strcasecmp(x.c_str(), "OFF") == 0) {
id(operation_mode) = 0;
ESP_LOGI("timer","Operation mode set to OFF");
} else if (strcasecmp(x.c_str(), "BOOST") == 0) {
id(operation_mode) = 3;
id(boost_timer) = 0;
ESP_LOGI("timer","Operation mode set to BOOST");
} else {
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
}
- script.execute: evaluate_relay_state
######################################################
# Expose the current operation mode (OFF, ON, TIMER, BOOST)
######################################################
- platform: template
name: "Operation Mode State"
lambda: |-
// 0=OFF, 1=ON, 2=TIMER, 3=BOOST
switch (id(operation_mode)) {
case 0: return {"OFF"};
case 1: return {"ON"};
case 2: return {"TIMER"};
case 3: return {"BOOST"};
default: return {"UNKNOWN"};
}
update_interval: 5s
######################################################
# Expose the "Morning On" time as a text (HH:MM)
######################################################
- platform: template
name: "Timeclock: Morning On Time"
lambda: |-
int hour = id(morning_on) / 60;
int minute = id(morning_on) % 60;
// Increase to 16 for safety
char buff[16];
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
return { std::string(buff) };
update_interval: "${update_interval}"
######################################################
# Expose the "Morning Off" time as a text (HH:MM)
######################################################
- platform: template
name: "Timeclock: Morning Off Time"
lambda: |-
int hour = id(morning_off) / 60;
int minute = id(morning_off) % 60;
// Increase buffer size to 8 just to be safe
// Increase to 16 for safety
char buff[16];
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
return { std::string(buff) };
update_interval: "${update_interval}"
######################################################
# Expose the "Evening On" time as a text (HH:MM)
######################################################
- platform: template
name: "Timeclock: Evening On Time"
lambda: |-
int hour = id(evening_on) / 60;
int minute = id(evening_on) % 60;
// Increase buffer size to 8 just to be safe
// Increase to 16 for safety
char buff[16];
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
return { std::string(buff) };
update_interval: "${update_interval}"
######################################################
# Expose the "Evening Off" time as a text (HH:MM)
######################################################
- platform: template
name: "Timeclock: Evening Off Time"
lambda: |-
int hour = id(evening_off) / 60;
int minute = id(evening_off) % 60;
// Increase buffer size to 8 just to be safe
// Increase to 16 for safety
char buff[16];
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
return { std::string(buff) };
update_interval: "${update_interval}"
##########################################################################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
##########################################################################################
binary_sensor:
- platform: gpio
pin:
number: GPIO03
mode: INPUT_PULLUP
inverted: true
name: "Power Button"
id: power_button
filters:
- delayed_on: 20ms
on_click:
- min_length: 20ms
max_length: 500ms
then:
- lambda: |-
if (id(relay).state) {
// Relay is ON: turn it OFF and set mode to 0 (TIMER)
id(relay).turn_off();
id(operation_mode) = 2;
} else {
// Relay is OFF: turn it ON and set mode to 3 (BOOST)
id(relay).turn_on();
id(operation_mode) = 3;
}
- platform: template
name: "Relay Status"
lambda: |-
return id(relay).state;
##########################################################################################
# Sensors
# https://esphome.io/components/text_sensor/index.html
##########################################################################################
sensor:
- platform: template
name: "Timeclock: Boost Duration"
id: boost_duration_time
unit_of_measurement: "mins"
accuracy_decimals: "0"
update_interval: "${update_interval}"
lambda: |-
return id(boost_duration);
- platform: template
name: "Mins from Midnight"
id: mins_from_midnight
unit_of_measurement: "mins"
accuracy_decimals: "0"
update_interval: "${update_interval}"
internal: True # No need to show this in Home Assistant
lambda: |-
return id(current_mins);
# A value in mins if a timer is running showing how many mins left
- platform: template
name: "Timer Minutes Remaining"
id: timer_minutes_remaining
unit_of_measurement: "Mins"
update_interval: 5s
accuracy_decimals: "0"
lambda: |-
// always zero if relay is off
if (!id(relay).state) {
return 0;
}
int rem = 0;
// only calculate for mode 2 (scheduled) or mode 3 (BOOST)
if (id(operation_mode) == 2) {
int a = id(morning_off) - id(current_mins);
int b = id(evening_off) - id(current_mins);
// if a is negative, use b; otherwise pick the smaller of a or b
rem = (a < 0) ? b : (a < b ? a : b);
}
else if (id(operation_mode) == 3) {
rem = id(boost_duration) - id(boost_timer);
}
// never return negative
return rem > 0 ? rem : 0;
#################################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#################################################################################################
switch:
- platform: gpio
name: "Power Output"
pin: GPIO14
id: relay
restore_mode: RESTORE_DEFAULT_OFF # Ensures the relay is restored (or off) at boot
#internal: true # Hides the switch from Home Assistant
icon: "${relay_icon}"
#################################################################################################
# BUTTON COMPONENT
# https://esphome.io/components/button/index.html
#################################################################################################
button:
- platform: template
name: "Boost now"
id: boost_button
icon: "mdi:play-circle-outline"
on_press:
# 1) reset BOOST timer and set mode
- lambda: |-
id(boost_timer) = 0;
id(operation_mode) = 3;
# 2) immediately re-evaluate relay state
- script.execute: evaluate_relay_state
- platform: template
name: "Default timer settings"
id: default_timer_settings_button
icon: "mdi:restore"
on_press:
- lambda: |-
// Restore all timing globals to their YAML defaults
id(morning_on) = ${morning_on_default};
id(morning_off) = ${morning_off_default};
id(evening_on) = ${evening_on_default};
id(evening_off) = ${evening_off_default};
id(boost_duration)= ${boost_duration_default};
// Reset mode to TIMER and clear any running boost
id(operation_mode)= 2;
id(boost_timer) = 0;
ESP_LOGI("timer","Default timer settings applied");
- script.execute: evaluate_relay_state
#################################################################################################
# SELECT COMPONENT
# https://esphome.io/components/select/index.html
#################################################################################################
select:
- platform: template
name: "Operation Mode"
id: operation_mode_select
update_interval: 5s
options:
- "OFF"
- "ON"
- "TIMER"
- "BOOST"
# show the current mode
lambda: |-
switch (id(operation_mode)) {
case 1: return std::string("ON");
case 2: return std::string("TIMER");
case 3: return std::string("BOOST");
default: return std::string("OFF");
}
# when changed in HA, set mode & re-evaluate
set_action:
- lambda: |-
if (x == "OFF") { id(operation_mode) = 0; }
else if (x == "ON") { id(operation_mode) = 1; }
else if (x == "TIMER") { id(operation_mode) = 2; }
else { // BOOST
id(boost_timer) = 0;
id(operation_mode) = 3;
}
- script.execute: evaluate_relay_state
#################################################################################################
# SCRIPT COMPONENT
# https://esphome.io/components/script.html
#################################################################################################
# Script: evaluate and drive the relay
script:
- id: evaluate_relay_state
then:
- lambda: |-
int mode = id(operation_mode);
// BOOST just forces the relay on
if (mode == 3) {
id(relay).turn_on();
return;
}
// OFF → always off
if (mode == 0) {
id(relay).turn_off();
return;
}
// ON → always on
if (mode == 1) {
id(relay).turn_on();
return;
}
// TIMER → follow schedule windows
{
bool should_on = false;
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
should_on = true;
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
should_on = true;
if (should_on) id(relay).turn_on();
else id(relay).turn_off();
}
#################################################################################################
# INTERVAL COMPONENT
# https://esphome.io/components/interval.html
#################################################################################################
# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
interval:
- interval: "1min"
then:
- lambda: |-
// — update current_mins via SNTP or fallback
if (!id(sntp_time).now().is_valid()) {
id(current_mins)++;
if (id(current_mins) >= 1440) id(current_mins) = 0;
} else {
auto now = id(sntp_time).now();
id(current_mins) = now.hour * 60 + now.minute;
}
// — if in BOOST, advance boost_timer and expire when done
if (id(operation_mode) == 3) {
id(boost_timer)++;
if (id(boost_timer) >= id(boost_duration)) {
id(operation_mode) = 2;
//id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
}
}
- script.execute: evaluate_relay_state

9
group/basement_lights.yaml
View File

@@ -1,11 +1,8 @@
basement_lights:
name: Basement Lights
entities:
- switch.tasmo_s4chan_4231_underhouselights_a
- switch.tasmo_s4chan_4231_underhouselights_b
- switch.tasmo_sdual_7681_officelights1_a
- switch.tasmo_sdual_7681_officelights1_b
- switch.esp_downstkitchlights_relay_1_dining_light
- switch.esp_downstkitchlights_relay_2_kitchen_light
- switch.esp_officelights_relay_1_nighttime_lights
- switch.esp_officelights_relay_2_daytime_lights
- switch.esp_underhouselights_underhouse_entrance_lights
- switch.esp_underhouselights_underhouse_storage_lights
- switch.esp_laundrylights_relay_1_laundry_lights

23
group/foxhole_lights.yaml
View File

@@ -1,13 +1,14 @@
foxhole_lights:
name: Downstairs Lights
# Doesn't include the outdoor switch lights
name: Downstairs Flat Lights
# All the lights in the Downstairs flat
# Doesn't include the outdoor switch lights, or bedroom wardrobe light
entities:
- switch.tasmo_ks811t_0707_downstloun_2a # Lounge Main Lights
- switch.tasmo_ks811t_0707_downstloun_2b # Lounge Wall Lights
- switch.tasmo_ks811s_3136_downstbed2_1a # Craft Room Lights
- switch.tasmo_ks811t_3642_downstbed1_1a # Main Bedroom, Main Lights
- switch.tasmo_ks811t_3642_downstbed1_1b # Main Bedroom, Wardrobe Light
- switch.tasmo_ks811t_3642_downstbed1_1c # Main Bedroom, Bedside switch
- switch.esp_downstkitchlights_relay_1_dining_light
- switch.esp_downstkitchlights_relay_2_kitchen_light
- switch.esp_downstkitchlights_relay_3_extract_fan
- switch.esp_downstloungemain_relay_1_main_lights # Lounge Main Lights
- switch.esp_downstloungemain_relay_2_back_wall_lights # Lounge Back Wall Lights
- switch.esp_downstbedrm1lights_relay_1_main_lights # Main Bedroom, Main Lights
- switch.esp_downstbedrm2lights_relay_1_main_lights # Small Bedroom Room Lights
- switch.esp_downstkitchlights_relay_2_kitchen_light # Kitchen Lights
- switch.esp_downstkitchlights_relay_1_dining_light # Dining Lights
- switch.esp_downstbathswitch_relay_1_main_lights # Bathroom main lights
- switch.esp_downstbathswitch_relay_2_cabinet_light # Bathroom Cabinet Lights

14
packages/pool_light_boost_switch.yaml
View File

@@ -22,12 +22,12 @@ automation:
to: "on"
condition:
condition: state
entity_id: switch.esp_poollightspower_power_output
entity_id: switch.esp_poollightpower_power_output
state: "off"
action:
- service: mqtt.publish
data:
topic: "viewroad-commands/poollights-timer/operation"
topic: "viewroad-commands/poollight-timer/operation"
payload: "BOOST"
- alias: "Pool Lights → send OFF & schedule TIMER when user turns UI switch OFF"
@@ -37,12 +37,12 @@ automation:
to: "off"
condition:
condition: state
entity_id: switch.esp_poollightspower_power_output
entity_id: switch.esp_poollightpower_power_output
state: "on"
action:
- service: mqtt.publish
data:
topic: "viewroad-commands/poollights-timer/operation"
topic: "viewroad-commands/poollight-timer/operation"
payload: "OFF"
- service: input_boolean.turn_on
data:
@@ -68,12 +68,12 @@ automation:
- alias: "Pool Lights → sync UI switch with real output (no MQTT)"
trigger:
platform: state
entity_id: switch.esp_poollightspower_power_output
entity_id: switch.esp_poollightpower_power_output
action:
- choose:
- conditions:
- condition: state
entity_id: switch.esp_poollightspower_power_output
entity_id: switch.esp_poollightpower_power_output
state: "on"
sequence:
- service: input_boolean.turn_on
@@ -84,7 +84,7 @@ automation:
entity_id: input_boolean.timer_light_midnight_pending
- conditions:
- condition: state
entity_id: switch.esp_poollightspower_power_output
entity_id: switch.esp_poollightpower_power_output
state: "off"
sequence:
- service: input_boolean.turn_off