esphome pool light and downs dishwasher device swaps
This commit is contained in:
root
@@ -1,30 +0,0 @@
|
||||
esphome:
|
||||
name: downstairs-bathroom-towelrail
|
||||
friendly_name: Downstairs Bathroom Towelrail
|
||||
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
# Enable logging
|
||||
logger:
|
||||
|
||||
# Enable Home Assistant API
|
||||
api:
|
||||
encryption:
|
||||
key: "LQNFgCf7ZydoK09V22GidNeAJSlFbbHk6rny0UHv/fQ="
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: "0a368f636bbb37d7195e93edac50f44b"
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
# Enable fallback hotspot (captive portal) in case wifi connection fails
|
||||
ap:
|
||||
ssid: "Downstairs-Bathroom-Towelrail"
|
||||
password: "kOc1t2CEXxgo"
|
||||
|
||||
captive_portal:
|
||||
|
||||
@@ -1,30 +0,0 @@
|
||||
esphome:
|
||||
name: downstairs-kitchen-lights
|
||||
friendly_name: Downstairs Kitchen Lights
|
||||
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
# Enable logging
|
||||
logger:
|
||||
|
||||
# Enable Home Assistant API
|
||||
api:
|
||||
encryption:
|
||||
key: "/ZwmBVlWvNzvYBgg7l7kt/gegaUxbej0Qg0CRyl5M/I="
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: "b692f015ebcd06236fd2a805050e32df"
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
# Enable fallback hotspot (captive portal) in case wifi connection fails
|
||||
ap:
|
||||
ssid: "Downstairs-Kitchen-Lights"
|
||||
password: "cAFaKcl5z7I2"
|
||||
|
||||
captive_portal:
|
||||
|
||||
@@ -1,504 +0,0 @@
|
||||
esphome/esp-datapower-b.yaml#############################################
|
||||
#############################################
|
||||
# Data Cupboard Power Monitor B
|
||||
# Athom Smart Plug Power Monitor ESP32-C3
|
||||
#
|
||||
# V1.0 2025-03-13 Initial Version
|
||||
#
|
||||
# based on https://github.com/athom-tech/esp32-configs/blob/main/athom-smart-plug.yaml
|
||||
#
|
||||
# SUMMARY
|
||||
# Smart plug with power moniroting. It has limited ability to
|
||||
# accidentally turn it off as it powers equipment in a data cupboard.
|
||||
# It does have the ability to turn off and back on automatically
|
||||
# a short time later, just in case a remote system reset is needed.
|
||||
# Also, the button on the side can't be bumped, you have to hold
|
||||
# it down for a few seconds to power it off.
|
||||
# The yaml code also calculates various power use summaries.
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
substitutions:
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
devicename: "esp-datapower-b"
|
||||
friendly_name: "Data Cupboard Power Monitor B"
|
||||
description_comment: "Smart plug power Monitor B, Data Cupboard"
|
||||
room: "Data Cupboard" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
api_key: !secret esp-datapower-b_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-datapower-b_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-datapower-b_ip
|
||||
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
|
||||
update_interval: 10s # update time for for general sensors etc
|
||||
|
||||
# Project Details
|
||||
project_name: "Athom Technology.Smart Plug V3"
|
||||
project_version: "v1.0.7" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Restore the relay (GPO switch) upon reboot to state:
|
||||
relay_restore_mode: RESTORE_DEFAULT_ON
|
||||
|
||||
# Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
current_limit : "10"
|
||||
|
||||
# Hide the ENERGY sensor that shows kWh consumed, but with no time period associated with it. Resets when device restarted and reflashed.
|
||||
hide_energy_sensor: "true"
|
||||
# Enable or disable the use of IPv6 networking on the device
|
||||
ipv6_enable: "false"
|
||||
# Power plug icon selection. Change to reflect the type/country of powr plug in use, this will update the power plug icon shown next to the switch
|
||||
power_plug_type: "power-socket-au" # Options: power-socket-au | power-socket-ch | power-socket-de | power-socket-eu | power-socket-fr | power-socket-it | power-socket-jp | power-socket-uk | power-socket-us |
|
||||
|
||||
|
||||
|
||||
#############################################
|
||||
# SYSTEM SPECIFIC VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
|
||||
timezone: "Pacific/Auckland"
|
||||
sntp_update_interval: 6h # Set the duration between the sntp service polling
|
||||
# Network time servers https://www.ntppool.org/zone/@
|
||||
sntp_server_1: !secret ntp_server_1
|
||||
sntp_server_2: !secret ntp_server_2
|
||||
sntp_server_3: !secret ntp_server_3
|
||||
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
|
||||
# Automatically add the mac address to the name
|
||||
# eg so you can use a single firmware for all devices
|
||||
add_mac_suffix: "false"
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
|
||||
mqtt_server: !secret ha_mqtt_server
|
||||
mqtt_username: !secret ha_mqtt_username
|
||||
mqtt_password: !secret ha_mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
# Add these if we are using the internal web server (this is pretty processor intensive)
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: "${room}"
|
||||
name_add_mac_suffix: "${add_mac_suffix}"
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
#esp8266:
|
||||
# board: esp01_1m # The original sonoff basic
|
||||
esp32:
|
||||
board: esp32-c3-devkitm-1
|
||||
flash_size: 4MB
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: arduino
|
||||
version: recommended
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
manual_ip: # optional static IP address
|
||||
static_ip: ${static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
fast_connect: "${wifi_fast_connect}"
|
||||
# Define dns domain / suffix to add to hostname
|
||||
domain: "${dns_domain}"
|
||||
|
||||
captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/index.html
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: ${sntp_update_interval}
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: False # enable entity discovery (true is default, we don't want two HA Instances)
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is maybe a good idea to save resources,
|
||||
# especially on an esp8266.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} # probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
|
||||
|
||||
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
dashboard_import:
|
||||
package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
|
||||
uart:
|
||||
rx_pin: GPIO20
|
||||
baud_rate: 4800
|
||||
data_bits: 8
|
||||
stop_bits: 1
|
||||
parity: EVEN
|
||||
|
||||
globals:
|
||||
- id: total_energy
|
||||
type: float
|
||||
restore_value: yes
|
||||
initial_value: '0.0'
|
||||
|
||||
# - id: restore_mode
|
||||
# type: int
|
||||
# restore_value: yes
|
||||
# initial_value: "2" # 0 = Always_Off. 1 = Restore_Power_Off. 2 = Always_On.
|
||||
|
||||
binary_sensor:
|
||||
- platform: status
|
||||
name: "Status"
|
||||
icon: mdi:check-network-outline
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
disabled_by_default: true
|
||||
on_multi_click:
|
||||
- timing:
|
||||
- ON for at most 10s
|
||||
- OFF for at least 2s
|
||||
then:
|
||||
- switch.toggle: relay
|
||||
# - timing:
|
||||
# - ON for at least 4s
|
||||
# then:
|
||||
# - button.press: Reset
|
||||
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
sensor:
|
||||
- platform: uptime
|
||||
name: "Uptime Sensor"
|
||||
id: uptime_sensor
|
||||
entity_category: diagnostic
|
||||
internal: true
|
||||
|
||||
- platform: wifi_signal
|
||||
name: "WiFi Signal dB"
|
||||
id: wifi_signal_db
|
||||
update_interval: 60s
|
||||
entity_category: "diagnostic"
|
||||
|
||||
- platform: copy
|
||||
source_id: wifi_signal_db
|
||||
name: "WiFi Signal Percent"
|
||||
filters:
|
||||
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
||||
unit_of_measurement: "Signal %"
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
- platform: cse7766
|
||||
id: athom_cse7766
|
||||
current:
|
||||
name: "Current"
|
||||
icon: mdi:current-ac
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
- lambda: if (x < 0.060) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected
|
||||
on_value_range:
|
||||
- above: ${current_limit}
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
|
||||
voltage:
|
||||
name: "Voltage"
|
||||
icon: mdi:sine-wave
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
power:
|
||||
name: "Power"
|
||||
id: power_sensor
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
- lambda: if (x < 3.0) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected
|
||||
|
||||
energy:
|
||||
name: "Energy"
|
||||
id: energy
|
||||
icon: mdi:lightning-bolt
|
||||
unit_of_measurement: kWh
|
||||
filters:
|
||||
- throttle: ${update_interval}
|
||||
# Multiplication factor from W to kW is 0.001
|
||||
- multiply: 0.001
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
static float previous_energy_value = 0.0;
|
||||
float current_energy_value = id(energy).state;
|
||||
id(total_energy) += current_energy_value - previous_energy_value;
|
||||
previous_energy_value = current_energy_value;
|
||||
id(total_energy_sensor).update();
|
||||
|
||||
apparent_power:
|
||||
name: "Apparent Power"
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
reactive_power:
|
||||
name: "Reactive Power"
|
||||
icon: mdi:flash
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
power_factor:
|
||||
name: "Power Factor"
|
||||
icon: mdi:percent-outline
|
||||
filters:
|
||||
- throttle_average: ${update_interval}
|
||||
|
||||
- platform: template
|
||||
name: "Total Energy"
|
||||
id: total_energy_sensor
|
||||
unit_of_measurement: kWh
|
||||
device_class: "energy"
|
||||
state_class: "total_increasing"
|
||||
icon: mdi:lightning-bolt
|
||||
accuracy_decimals: 3
|
||||
lambda: |-
|
||||
return id(total_energy);
|
||||
update_interval: ${update_interval}
|
||||
|
||||
- platform: total_daily_energy
|
||||
name: "Total Daily Energy"
|
||||
restore: true
|
||||
power_id: power_sensor
|
||||
unit_of_measurement: kWh
|
||||
icon: mdi:hours-24
|
||||
accuracy_decimals: 3
|
||||
filters:
|
||||
- multiply: 0.001
|
||||
|
||||
button:
|
||||
# - platform: restart
|
||||
# name: "Restart"
|
||||
# entity_category: config
|
||||
|
||||
# - platform: factory_reset
|
||||
# name: "Factory Reset"
|
||||
# id: Reset
|
||||
# entity_category: config
|
||||
|
||||
# - platform: safe_mode
|
||||
# name: "Safe Mode"
|
||||
# internal: false
|
||||
# entity_category: config
|
||||
|
||||
- platform: template
|
||||
name: "Turn Off Relay Temporarily"
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
- delay: 5s
|
||||
- switch.turn_on: relay
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Switch"
|
||||
pin: GPIO5
|
||||
id: relay
|
||||
restore_mode: ALWAYS_ON # Ensures the relay is on at boot
|
||||
internal: true # Hides the switch from Home Assistant
|
||||
#icon: mdi:${power_plug_type} # Don't need an icon if we can't see it...
|
||||
|
||||
light:
|
||||
- platform: status_led
|
||||
name: "Status LED"
|
||||
id: blue_led
|
||||
icon: mdi:lightbulb-outline
|
||||
disabled_by_default: false
|
||||
pin:
|
||||
inverted: true
|
||||
number: GPIO6
|
||||
|
||||
text_sensor:
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: "IP Address"
|
||||
icon: mdi:ip-network
|
||||
entity_category: diagnostic
|
||||
ssid:
|
||||
name: "Connected SSID"
|
||||
icon: mdi:wifi-strength-2
|
||||
entity_category: diagnostic
|
||||
mac_address:
|
||||
name: "Mac Address"
|
||||
icon: mdi:network-pos
|
||||
entity_category: diagnostic
|
||||
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
- platform: template
|
||||
name: 'Last Restart'
|
||||
id: device_last_restart
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
# device_class: timestamp
|
||||
|
||||
# Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
|
||||
- platform: template
|
||||
name: "Uptime"
|
||||
entity_category: diagnostic
|
||||
lambda: |-
|
||||
int seconds = (id(uptime_sensor).state);
|
||||
int days = seconds / (24 * 3600);
|
||||
seconds = seconds % (24 * 3600);
|
||||
int hours = seconds / 3600;
|
||||
seconds = seconds % 3600;
|
||||
int minutes = seconds / 60;
|
||||
seconds = seconds % 60;
|
||||
if ( days > 3650 ) {
|
||||
return { "Starting up" };
|
||||
} else if ( days ) {
|
||||
return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else if ( hours ) {
|
||||
return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else if ( minutes ) {
|
||||
return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
|
||||
} else {
|
||||
return { (String(seconds) +"s").c_str() };
|
||||
}
|
||||
icon: mdi:clock-start
|
||||
@@ -1,656 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DOWNSTAIRS BATHROOM HEATED TOWEL RAIL
|
||||
# Controlled by a Sonoff Basic
|
||||
#
|
||||
# V2.0 2025-06-11 Added select and button to chose modes, added countdown & startup to boost
|
||||
# V2.0 2025-06-05 YAML Tidyups
|
||||
# V1.1 2025-04-12 Fixes to timers and offline modes
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# - It allows a heated towel rail device to work in a standalone operation
|
||||
# - On startup, it will turn on for (startup_duration) hours then go into timer mode (this allows you to just turn it on to get some heat immediately)
|
||||
# - The timer has a morning and evening time (but no weekday/weekend setting)
|
||||
# - Default values are 5am-7am and 9pm-Midnight (as this suits our use case)
|
||||
# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
|
||||
# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
|
||||
# - If on a network and there is a MQTT server, you can set the 4 on/off times via MQTT (See below commands)
|
||||
# - You can set 4 modes ON/OFF/TIMER/STARTUP via MQTT. That way, you can set to STARTUP for a short boost
|
||||
# - Any new timer times set via MQTT will be remembered though a reboot
|
||||
# - On a reboot, the device will always turn on for the Startup Duration (STARTUP mode, default 2 hours)
|
||||
# - TIMER mode will always be switched on after startup mode is complete
|
||||
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 30 seconds (with ~2 secs in between to allow it to boot)
|
||||
#
|
||||
# MQTT Commands
|
||||
# Values will be set in place on the update_interval time, not immediately
|
||||
# Use 00:00 in 24hr format for time setting. Note there is no weekday/weekend setting
|
||||
# mqtt_timer_topic/morning-on/06:00 : Time device will go on
|
||||
# mqtt_timer_topic/morning-off/08:00 : Time device will go off
|
||||
# mqtt_timer_topic/evening-on/09:00 : Time device will go on
|
||||
# mqtt_timer_topic/evening-off/00:00 : Time device will go off
|
||||
# mqtt_timer_topic/boost-time/0000 : Time in minutes device will temporarily go on for
|
||||
# mqtt_timer_topic/operation/ON : Device permanently on
|
||||
# mqtt_timer_topic/operation/OFF : Device permanently off
|
||||
# mqtt_timer_topic/operation/TIMER : Device will obey timer settings
|
||||
# mqtt_timer_topic/operation/BOOST : Turn on for (startup_duration) hours then BOOST (also on startup)
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-downstbathtowelrail"
|
||||
friendly_name: "Downstairs Bathroom Towelrail"
|
||||
description_comment: "Sonoff Basic controlling ON/OFF/Timer for the Heated Towel Rail in the Downstairs Bathroom"
|
||||
device_area: "Downstairs Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.Sonoff Basic V1" # Project Details
|
||||
project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstbathtowelrail_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# Timer Settings
|
||||
mqtt_timer_topic: "viewroad-commands/downstbath-towelrail" # Topics you will use to change stuff
|
||||
startup_duration: "120" # Minutes to stay ON in STARTUP mode before reverting to TIMER
|
||||
morning_on_default: "420" # Default in minutes from midnight. Default 07:00 => 420
|
||||
morning_off_default: "450" # Default in minutes from midnight. Default 07:30 => 450
|
||||
evening_on_default: "1260" # Default in minutes from midnight. Default 21:00 => 1260
|
||||
evening_off_default: "1320" # Default in minutes from midnight. Default 22:00 => 1320 => 1440 is midnight
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
on_boot:
|
||||
priority: 900 # High priority to run after globals are initialized
|
||||
then:
|
||||
- lambda: |-
|
||||
// 1) Figure out the current time in "seconds from midnight"
|
||||
// using SNTP if available, otherwise current_mins * 60.
|
||||
bool have_sntp = id(sntp_time).now().is_valid();
|
||||
int current_time_s = 0;
|
||||
|
||||
if (have_sntp) {
|
||||
auto now = id(sntp_time).now();
|
||||
current_time_s = now.hour * 3600 + now.minute * 60 + now.second;
|
||||
} else {
|
||||
// current_mins is in minutes; convert to seconds
|
||||
current_time_s = id(current_mins) * 60;
|
||||
}
|
||||
|
||||
// 2) Compare with the last boot time
|
||||
int diff = current_time_s - id(last_boot_time_s);
|
||||
|
||||
// If within 30 seconds, increment boot_count; otherwise reset to 1
|
||||
if (diff >= 0 && diff <= 30) {
|
||||
id(boot_count)++;
|
||||
} else {
|
||||
id(boot_count) = 1;
|
||||
}
|
||||
|
||||
// Update stored last boot time
|
||||
id(last_boot_time_s) = current_time_s;
|
||||
|
||||
// 3) If we've booted 4+ times in 20s => force ON mode
|
||||
if (id(boot_count) >= 4) {
|
||||
id(operation_mode) = 1; // ON
|
||||
ESP_LOGI("power_cycle", "Detected 4 power cycles in 20s => Forcing ON mode");
|
||||
} else {
|
||||
// Otherwise do your normal startup logic:
|
||||
id(operation_mode) = 3; // on_boot -> sets operation_mode = 3 (STARTUP)
|
||||
id(startup_timer) = 0; // and reset startup_timer = 0 (for time sync if no sntp)
|
||||
ESP_LOGI("power_cycle", "Boot count=%d => STARTUP mode", id(boot_count));
|
||||
}
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
restore_from_flash: true # restore some values on reboot
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
#############################################
|
||||
globals:
|
||||
|
||||
# Tracks the time (in seconds from midnight) at the previous boot
|
||||
- id: last_boot_time_s
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Counts how many consecutive boots have occurred (within X seconds)
|
||||
- id: boot_count
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
####################################################
|
||||
# operation_mode:
|
||||
# 0 = OFF
|
||||
# 1 = ON
|
||||
# 2 = TIMER
|
||||
# 3 = STARTUP
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "3"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
# Not restored, so it resets each boot.
|
||||
####################################################
|
||||
- id: current_mins
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "720" # 720 is 12:00 Noon
|
||||
|
||||
####################################################
|
||||
# startup_timer: counts minutes in STARTUP mode
|
||||
# After 'startup_duration' minutes, revert to TIMER.
|
||||
# Not restored, so each boot starts fresh at 0.
|
||||
####################################################
|
||||
- id: startup_timer
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "0"
|
||||
|
||||
#############################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
text_sensor:
|
||||
|
||||
############################
|
||||
# MQTT Subscriptions
|
||||
############################
|
||||
####################################################
|
||||
# Subscribe to the Morning On time, format "HH:MM"
|
||||
# We check x.size() == 5 and x[2] == ':',
|
||||
# then parse x.substr(0,2) and x.substr(3,2)
|
||||
# std::string uses 'substr', not 'substring'.
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning On Time Setting"
|
||||
id: morning_on_topic
|
||||
topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
|
||||
internal: True
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
// Expect "HH:MM" => total length = 5, with ':'
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str()); // "HH"
|
||||
int minute = atoi(x.substr(3, 2).c_str()); // "MM"
|
||||
id(morning_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Morning Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning Off Time Setting"
|
||||
id: morning_off_topic
|
||||
topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(morning_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening On time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening On Time Setting"
|
||||
id: evening_on_topic
|
||||
topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening Off Time Setting"
|
||||
id: evening_off_topic
|
||||
topic: "${mqtt_timer_topic}/evening-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Subscribe to operation mode:
|
||||
# OFF, ON, TIMER, STARTUP
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Operation Mode Setting"
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation" # STARTUP,ON,OFF,TIMER
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
/*
|
||||
* In standard C++ (ESPHome), no 'equalsIgnoreCase()'.
|
||||
* We use 'strcasecmp' for case-insensitive compare.
|
||||
* Returns 0 if they match ignoring case.
|
||||
*/
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
} else if (strcasecmp(x.c_str(), "ON") == 0) {
|
||||
id(operation_mode) = 1;
|
||||
ESP_LOGI("timer","Operation mode set to ON");
|
||||
} else if (strcasecmp(x.c_str(), "OFF") == 0) {
|
||||
id(operation_mode) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "STARTUP") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(startup_timer) = 0; // Reset the startup timer to zero
|
||||
ESP_LOGI("timer","Operation mode set to STARTUP");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, STARTUP)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Operation Mode State"
|
||||
lambda: |-
|
||||
// 0=OFF, 1=ON, 2=TIMER, 3=STARTUP
|
||||
switch (id(operation_mode)) {
|
||||
case 0: return {"OFF"};
|
||||
case 1: return {"ON"};
|
||||
case 2: return {"TIMER"};
|
||||
case 3: return {"STARTUP"};
|
||||
default: return {"UNKNOWN"};
|
||||
}
|
||||
update_interval: 5s
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning On Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_on) / 60;
|
||||
int minute = id(morning_on) % 60;
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning Off Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_off) / 60;
|
||||
int minute = id(morning_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening On Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_on) / 60;
|
||||
int minute = id(evening_on) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening Off Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_off) / 60;
|
||||
int minute = id(evening_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: 0
|
||||
update_interval: "${update_interval}"
|
||||
internal: True
|
||||
lambda: |-
|
||||
return id(current_mins);
|
||||
|
||||
# A value in mins if a timer is running showing how many mins left
|
||||
- platform: template
|
||||
name: "Timer Minutes Remaining"
|
||||
id: timer_minutes_remaining
|
||||
unit_of_measurement: "Mins"
|
||||
update_interval: 5s
|
||||
accuracy_decimals: "0"
|
||||
lambda: |-
|
||||
// always zero if relay is off
|
||||
if (!id(relay).state) {
|
||||
return 0;
|
||||
}
|
||||
int rem = 0;
|
||||
// only calculate for mode 2 (scheduled) or mode 3 (startup)
|
||||
if (id(operation_mode) == 2) {
|
||||
int a = id(morning_off) - id(current_mins);
|
||||
int b = id(evening_off) - id(current_mins);
|
||||
// if a is negative, use b; otherwise pick the smaller of a or b
|
||||
rem = (a < 0) ? b : (a < b ? a : b);
|
||||
}
|
||||
else if (id(operation_mode) == 3) {
|
||||
rem = ${startup_duration} - id(startup_timer);
|
||||
}
|
||||
// never return negative
|
||||
return rem > 0 ? rem : 0;
|
||||
|
||||
####################################################
|
||||
# Relay Switch (Sonoff Basic Relay on GPIO12)
|
||||
####################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Towel Rail Power"
|
||||
pin: GPIO12
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
|
||||
#################################################################################################
|
||||
# BUTTON COMPONENT
|
||||
# https://esphome.io/components/button/index.html
|
||||
#################################################################################################
|
||||
button:
|
||||
- platform: template
|
||||
name: "Startup: ${startup_duration} Minutes"
|
||||
id: startup_button
|
||||
icon: "mdi:play-circle-outline" # optional, pick any MaterialDesign icon you like
|
||||
on_press:
|
||||
then:
|
||||
# 1) set the mode to STARTUP (3)
|
||||
- lambda: |-
|
||||
id(startup_timer) = 0; // Reset the startup timer to zero
|
||||
id(operation_mode) = 3; // Set to STARTUP
|
||||
ESP_LOGD("main", "operation_mode set to %d via STARTUP button", id(operation_mode));
|
||||
# 2) turn on the relay switch
|
||||
- switch.turn_on:
|
||||
id: relay
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
# https://esphome.io/components/select/index.html
|
||||
#################################################################################################
|
||||
select:
|
||||
- platform: template
|
||||
name: "Operation Mode"
|
||||
id: operation_mode_select
|
||||
update_interval: 5s # poll every 5 s for external changes
|
||||
options:
|
||||
- "OFF"
|
||||
- "ON"
|
||||
- "TIMER"
|
||||
- "STARTUP"
|
||||
|
||||
# Getter: maps your integer into one of the four strings
|
||||
lambda: |-
|
||||
switch (id(operation_mode)) {
|
||||
case 1: return std::string("ON");
|
||||
case 2: return std::string("TIMER");
|
||||
case 3: return std::string("STARTUP");
|
||||
default: return std::string("OFF");
|
||||
}
|
||||
|
||||
# set_action: called when you pick an option in HA
|
||||
set_action:
|
||||
- lambda: |-
|
||||
if (x == "OFF") id(operation_mode) = 0;
|
||||
else if (x == "ON") id(operation_mode) = 1;
|
||||
else if (x == "TIMER") id(operation_mode) = 2;
|
||||
else {
|
||||
id(startup_timer) = 0; // Reset the startup timer to zero
|
||||
id(operation_mode) = 3; /* STARTUP */
|
||||
}
|
||||
ESP_LOGD("main", "operation_mode set to %d", id(operation_mode));
|
||||
|
||||
####################################################
|
||||
# Check every minute to decide relay state
|
||||
####################################################
|
||||
interval:
|
||||
- interval: "1min" # Must be 1min as this is used to calculate times
|
||||
then:
|
||||
- lambda: |-
|
||||
|
||||
// Do we have correct time from SNTP? If not...
|
||||
if (!id(time_sync).has_state()) {
|
||||
// Set minutes since midnight
|
||||
id(current_mins) = id(current_mins) +1 ;
|
||||
|
||||
// wrap around at 1440 => next day
|
||||
if (id(current_mins) >= 1440) {
|
||||
id(current_mins) = 0;
|
||||
}
|
||||
|
||||
// If we do have proper SNMP time...
|
||||
} else {
|
||||
// Use real time from SNTP
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// operation_mode:
|
||||
// 0 = OFF
|
||||
// 1 = ON
|
||||
// 2 = TIMER
|
||||
// 3 = STARTUP
|
||||
int mode = id(operation_mode);
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// STARTUP MODE: Relay ON for 'startup_duration'
|
||||
// minutes, then automatically revert to TIMER.
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 3) {
|
||||
id(startup_timer) = id(startup_timer) + 1 ; // works as long as update_interval in seconds
|
||||
// Compare with the substitution startup_duration
|
||||
if (id(startup_timer) < (int) ${startup_duration}) {
|
||||
// Still within the STARTUP period => turn relay on
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
// After 'startup_duration' minutes => switch to TIMER
|
||||
id(operation_mode) = 2;
|
||||
id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
// Skip the rest of the logic
|
||||
ESP_LOGI("startup_timer", "startup_timer=%d", id(startup_timer));
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// OFF MODE => always off
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// ON MODE => always on
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// TIMER MODE => follow morning/evening schedule
|
||||
// using SNTP if valid, else current_mins
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 2)
|
||||
{
|
||||
|
||||
bool should_on = false;
|
||||
|
||||
// Check morning window
|
||||
// Example: morning_on=360 => 06:00, morning_off=480 => 08:00
|
||||
// If current_mins in [360..480), should_on = true
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Check evening window
|
||||
// Example: evening_on=1260 => 21:00, evening_off=1440 => midnight
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Final relay state based on schedule
|
||||
if (should_on) {
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
id(relay).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,205 +0,0 @@
|
||||
|
||||
# This is a generic starter yaml file for
|
||||
# espHome, by zorruno 2024
|
||||
# <DEVICENAME> would be something like loungefancontroller
|
||||
# yaml file would then be esp-loungefancontroller.yaml
|
||||
|
||||
#############################################
|
||||
#############################################
|
||||
# TITLE
|
||||
# Details of what the device is plus
|
||||
# any relevant web links
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SECRETS
|
||||
# Secrets file is usually at config/secrets.yaml
|
||||
# or config/esphome/secrets.yaml
|
||||
# depending on your setup with HA
|
||||
#############################################
|
||||
# SECRETS FILE needs these specific secrets:
|
||||
# esp-<DEVICENAME>_api_key
|
||||
# esp-<DEVICENAME>_ota_pass
|
||||
# esp-<DEVICENAME>_static_ip (Optional)
|
||||
# esp-<DEVICENAME>_gateway (Optional)
|
||||
# esp-<DEVICENAME>_subnet (Optional)
|
||||
#
|
||||
# SECRETS FILE needs these generic Secrets:
|
||||
# wifi_ssid
|
||||
# wifi_password
|
||||
# fallback_ap_password
|
||||
# mqtt_server
|
||||
# mqtt_username
|
||||
# mqtt_password
|
||||
# web_server_username (Optional)
|
||||
# web_server_password (Optional)
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# VARIABLE SUBSTITUTIONS
|
||||
# Give the device a useful name & description here
|
||||
# and change values accordingly.
|
||||
#############################################
|
||||
substitutions:
|
||||
device_name: esp-<DEVICENAME>
|
||||
friendly_name: "Device friendly name"
|
||||
description_comment: "A Description of this device"
|
||||
|
||||
# if NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
api_key: !secret esp-<DEVICENAME>_api_key # unfortunately you can't use substitutions in secrets names
|
||||
ota_pass: !secret esp-<DEVICENAME>_ota_pass # unfortunately you can't use substitutions in secrets names
|
||||
wifi_ssid: !secret wifi_ssid
|
||||
wifi_password: !secret wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
#static_ip_address: !secret esp-<DEVICENAME>_static_ip
|
||||
#static_ip_gateway: !secret esp-<DEVICENAME>_gateway
|
||||
#static_ip_subnet: !secret esp-<DEVICENAME>_subnet
|
||||
|
||||
mqtt_server: !secret mqtt_server
|
||||
mqtt_username: !secret mqtt_username
|
||||
mqtt_password: !secret mqtt_password
|
||||
mqtt_topic: "esphome" # main topic for the mqtt server, call it what you like
|
||||
|
||||
web_server_username: !secret web_server_username
|
||||
web_server_password: !secret web_server_password
|
||||
|
||||
update_time: 60s # update time for for general temp sensors etc
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name} # appears as main name on the esphome page in HA
|
||||
comment: ${description_comment} # appears as comment on the esphome page in HA
|
||||
#min_version: 2024.6.0
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp32:
|
||||
board: <ESP-DEVICE>
|
||||
framework:
|
||||
type: esp-idf # Suggest using the ESP-IDF Framework. Changing from 'arduino' to 'esp-idf' needs a cabled flash to correct partitions
|
||||
version: recommended # recommended, latest or dev
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enabl
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO # INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
#manual_ip: #optional static IP address
|
||||
#static_ip: ${static_ip_address}
|
||||
#gateway: ${static_ip_gateway}
|
||||
#subnet: ${static_ip_subnet}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${device_name} fallback AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is probably a good idea to save resources.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} #probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${device_name}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
|
||||
#############################################
|
||||
# Time Component
|
||||
# https://esphome.io/components/time/index.html#time-component
|
||||
# Sync with HA Time. Probably not really necessary.
|
||||
#############################################
|
||||
#time:
|
||||
# - platform: homeassistant
|
||||
# id: homeassistant_time
|
||||
|
||||
#############################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
text_sensor:
|
||||
- platform: version
|
||||
name: ${friendly_name} Version
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: ${friendly_name} IP Address
|
||||
|
||||
#############################################
|
||||
# General Sensors
|
||||
# https://esphome.io/components/sensor/index.html
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: uptime # Uptime for this device
|
||||
name: ${friendly_name} Uptime
|
||||
update_interval: ${update_time}
|
||||
- platform: wifi_signal # Wifi Strength
|
||||
name: ${friendly_name} Wifi Signal
|
||||
update_interval: ${update_time}
|
||||
|
||||
#############################################
|
||||
# Binary Sensors
|
||||
# https://esphome.io/components/binary_sensor/index.html
|
||||
#############################################
|
||||
#binary_sensor:
|
||||
|
||||
@@ -1,154 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
# V1.0 2025-05-30 Initial Version
|
||||
#############################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
device_name: "esp-laundrylights"
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
entity_prefix: "Laundry" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
friendly_name: "Laundry Main Lightswitch (3)"
|
||||
description_comment: "Laundry Main Lightswitch using a Zemismart KS-811 Triple Push Button. Laundry Lights (1), Spare (2), Laundry Power Signal (3)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
api_key: !secret esp-laundrylights_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-laundrylights_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-laundrylights_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
on_boot:
|
||||
priority: 200
|
||||
then:
|
||||
- switch.turn_on: Relay_3
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: Light Switch (Laundry)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: Spare"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: Laundry Power Enable"
|
||||
on_press:
|
||||
- switch.toggle: Relay_3
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: Laundry Lights"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: Spare"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay 3: Laundry Power Enable Signal"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
@@ -1,154 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
# V1.0 2025-05-30 Initial Version
|
||||
#############################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
device_name: "esp-laundrylights"
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
entity_prefix: "Laundry" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
friendly_name: "Main Bathroom Lightswitch (3)"
|
||||
description_comment: "Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
api_key: !secret esp-mainbathlights_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-mainbathlights_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-mainbathlights_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
# on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: Main Lights"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: Shower Lights"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: Cabinet Lights"
|
||||
on_press:
|
||||
- switch.toggle: Relay_3
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: Main Lights"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: Shower Lights"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay 3: Cabinet Lights"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
@@ -1,157 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
# V2.0 2025-06-01 Was initially a 3 button switch, now 2
|
||||
# V1.0 2025-05-30 Initial Version
|
||||
#############################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
device_name: "esp-laundrylights2"
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v2" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
entity_prefix: "Laundry" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
friendly_name: "Laundry Main Lightswitch (2)"
|
||||
description_comment: "Laundry Main Lightswitch using a Zemismart KS-811 Double Push Button. Laundry Lights (1), Laundry Power Signal (2)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
api_key: !secret esp-laundrylights_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-laundrylights_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-laundrylights2_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
on_boot:
|
||||
priority: 200
|
||||
then:
|
||||
- switch.turn_on: Relay_2
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: Light Switch (Laundry)"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: Laundry Power Enable"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
# ONLY ON A KS-811-3
|
||||
# - platform: gpio
|
||||
# pin:
|
||||
# number: GPIO4
|
||||
# mode: INPUT
|
||||
# inverted: True
|
||||
# name: "Button 3: "
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_3
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: Laundry Lights"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: Laundry Power Enable Signal"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
# ONLY ON A KS-811-3
|
||||
# - platform: gpio
|
||||
# name: "Relay 3: "
|
||||
# pin: GPIO14
|
||||
# id: Relay_3
|
||||
|
||||
|
||||
@@ -1,157 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
# V1.0 2025-05-30 Initial Version
|
||||
#############################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
device_name: "esp-mainbathlights"
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
entity_prefix: "Laundry" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
friendly_name: "Main Bathroom Lightswitch (3)"
|
||||
description_comment: "Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
api_key: !secret esp-mainbathlights_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-mainbathlights_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-mainbathlights_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
device_name: ${device_name}
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
device_name: ${device_name}
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
# on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#############################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: Main Lights"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: Shower Lights"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: Cabinet Lights"
|
||||
on_press:
|
||||
- switch.toggle: Relay_3
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: Main Lights"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: Shower Lights"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay 3: Cabinet Lights"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
@@ -1,437 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# HiLink LD1125H mmWave sensor, with BME280 Temp/Hum/Pres Sensor on an ESP32
|
||||
# https://zorruno.com/2024/mmwave-occupancy-with-esp32-ld1125h/
|
||||
#
|
||||
# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/tree/main
|
||||
# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/blob/main/LD1125H/ESP32-LD1125H-Complete.yaml
|
||||
#
|
||||
# mth1: 0 to 2.8m sensitive
|
||||
# mth2: 2.8 to 8m sensitive
|
||||
# mth3: above 8m sensitive
|
||||
# rmax: max distance
|
||||
# Clearance Time: Mov/Occ to Clearance waiting time
|
||||
# Movement Time: Mov to Occ waiting time
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: "esp-occupancyoffice"
|
||||
friendly_name: "Office Occupancy & Environment"
|
||||
description_comment: "D1 Mini ESP32 with LD1125H mmWave and environment sensors for downstairs office"
|
||||
api_key: !secret esp-occupancyoffice_api_key #unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-occupancyoffice_ota_pass #unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-occupancyoffice_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
room: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
#############################################
|
||||
# SPECIFIC PROJECT VARIABLE SUBSTITUTIONS
|
||||
#############################################
|
||||
#
|
||||
#
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
# common_api: !include
|
||||
# file: common/api_common.yaml
|
||||
# vars:
|
||||
# local_api_key: ${api_key}
|
||||
common_webportal: !include
|
||||
file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0
|
||||
area: "${room}"
|
||||
on_boot: #LD1125H Initial Setting, will remember previous values (if set)
|
||||
priority: -200
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th1st = "mth1=" + str_sprintf("%.0f",id(LD1125H_mth1).state) +"\r\n";
|
||||
return std::vector<uint8_t>(th1st.begin(), th1st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th2st = "mth2=" + str_sprintf("%.0f",id(LD1125H_mth2).state) +"\r\n";
|
||||
return std::vector<uint8_t>(th2st.begin(), th2st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th3st = "mth3=" + str_sprintf("%.0f",id(LD1125H_mth3).state) +"\r\n";
|
||||
return std::vector<uint8_t>(th3st.begin(), th3st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string rmaxst = "rmax=" + str_sprintf("%.1f",id(LD1125H_rmax).state) +"\r\n";
|
||||
return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
#type: arduino
|
||||
type: esp-idf #Suggest using the ESP-IDF Framework. Changing from arduino to esp-idf needs a cabled download to change partitions
|
||||
version: recommended #recommended, latest or dev
|
||||
|
||||
#############################################
|
||||
# ESPHome external or custom components to use
|
||||
# https://esphome.io/components/external_components.html
|
||||
# https://github.com/ssieb/esphome_components/tree/master/components/serial
|
||||
#############################################
|
||||
external_components:
|
||||
- source:
|
||||
type: git
|
||||
url: https://github.com/ssieb/custom_components #Thanks for @ssieb components.
|
||||
components: [ serial ] #text_sensor that reads lines for a uart. Also, a sensor that reads single binary values from the uart.
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
on_client_connected:
|
||||
- esp32_ble_tracker.start_scan:
|
||||
continuous: true
|
||||
on_client_disconnected:
|
||||
- esp32_ble_tracker.stop_scan:
|
||||
|
||||
|
||||
|
||||
#############################################
|
||||
# i2c bus
|
||||
# https://esphome.io/components/i2c.html
|
||||
# 10, 50, 100, 200, 800 are possible settings
|
||||
# for frequency, 50kHz is default
|
||||
#############################################
|
||||
i2c:
|
||||
sda: GPIO19
|
||||
scl: GPIO21
|
||||
scan: True #look for devices on boot up and report
|
||||
frequency: 50kHz
|
||||
|
||||
#############################################
|
||||
# UART Serial
|
||||
# hardware on EPS32, but software, and can be glitchy on ESP8266
|
||||
# https://esphome.io/components/uart.html
|
||||
#############################################
|
||||
uart:
|
||||
id: LD1125H_UART_BUS
|
||||
rx_pin: GPIO16 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
|
||||
tx_pin: GPIO17 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
|
||||
baud_rate: 115200
|
||||
data_bits: 8
|
||||
stop_bits: 1
|
||||
parity: NONE
|
||||
|
||||
#############################################
|
||||
# Bluetooth
|
||||
# https://esphome.io/components/bluetooth_proxy.html
|
||||
# https://esphome.io/components/esp32_ble_tracker.html
|
||||
# Remember that this takes a LOT of processing. On the
|
||||
# ESP32, enable the IDF framework, and disable the
|
||||
# Web server component. Changing to the IDF framework
|
||||
# needs to be via cable not OTA to change the
|
||||
# partition setup.
|
||||
#############################################
|
||||
bluetooth_proxy:
|
||||
active: true
|
||||
cache_services: true
|
||||
|
||||
esp32_ble_tracker:
|
||||
scan_parameters:
|
||||
continuous: false
|
||||
|
||||
#############################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
#############################################
|
||||
globals:
|
||||
- id: LD1125H_Last_Time
|
||||
type: time_t
|
||||
restore_value: no
|
||||
#initial_value: time(NULL)
|
||||
#initial_value: !lambda 'return ::time(nullptr);'
|
||||
initial_value: "0"
|
||||
- id: LD1125H_Last_Mov_Time
|
||||
type: time_t
|
||||
restore_value: no
|
||||
#initial_value: time(NULL)
|
||||
#initial_value: !lambda 'return ::time(nullptr);'
|
||||
initial_value: "0"
|
||||
- id: LD1125H_Clearence_Status
|
||||
type: bool
|
||||
restore_value: no
|
||||
initial_value: "false"
|
||||
|
||||
#############################################
|
||||
# General esp status LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2 #ESP32 Onboard LED
|
||||
ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
|
||||
inverted: false
|
||||
|
||||
#############################################
|
||||
# Interval Automations
|
||||
# https://esphome.io/guides/automations.html
|
||||
#############################################
|
||||
interval:
|
||||
- interval: 1s #Clearance Scan Time
|
||||
setup_priority: -200
|
||||
then:
|
||||
lambda: |-
|
||||
if ((time(NULL)-id(LD1125H_Last_Time))>id(LD1125H_Clear_Time).state) {
|
||||
if ((id(LD1125H_Clearence_Status) == false) || (id(LD1125H_Occupancy).state != "Clearance")) {
|
||||
id(LD1125H_Occupancy).publish_state("Clearance");
|
||||
id(LD1125H_Clearence_Status) = true;
|
||||
}
|
||||
if (id(LD1125H_MovOcc_Binary).state == true) {
|
||||
id(LD1125H_MovOcc_Binary).publish_state(false);
|
||||
}
|
||||
if (id(LD1125H_Mov_Binary).state == true) {
|
||||
id(LD1125H_Mov_Binary).publish_state(false);
|
||||
}
|
||||
}
|
||||
|
||||
#############################################
|
||||
# Number Sensors (custom component)
|
||||
# refer https://github.com/ssieb/esphome_components/tree/master/components/serial
|
||||
#############################################
|
||||
number:
|
||||
- platform: template
|
||||
name: ${friendly_name} LD1125H mth1 #mth1 is 0~2.8m Sensitivity.
|
||||
id: LD1125H_mth1
|
||||
icon: "mdi:cogs"
|
||||
optimistic: true
|
||||
restore_value: true #If you don't want to store the setting at ESP, set it to false.
|
||||
initial_value: "60.0" #Default mth1 Setting
|
||||
min_value: 10.0
|
||||
max_value: 600.0
|
||||
step: 5.0
|
||||
set_action:
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th1st = "mth1=" + str_sprintf("%.0f",x) +"\r\n";
|
||||
return std::vector<uint8_t>(th1st.begin(), th1st.end());
|
||||
- platform: template
|
||||
name: ${friendly_name} LD1125H mth2 #mth2 is 2.8~8m Sensitivity.
|
||||
id: LD1125H_mth2
|
||||
icon: "mdi:cogs"
|
||||
optimistic: true
|
||||
restore_value: true #If you don't want to store the setting at ESP, set it to false.
|
||||
initial_value: "30" #Default mth2 Setting
|
||||
min_value: 5
|
||||
max_value: 300
|
||||
step: 5
|
||||
set_action:
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th2st = "mth2=" + str_sprintf("%.0f",x) +"\r\n";
|
||||
return std::vector<uint8_t>(th2st.begin(), th2st.end());
|
||||
- platform: template
|
||||
name: ${friendly_name} LD1125H mth3 #mth3 is above 8m Sensitivity.
|
||||
id: LD1125H_mth3
|
||||
icon: "mdi:cogs"
|
||||
optimistic: true
|
||||
restore_value: true #If you don't want to store the setting at ESP, set it to false.
|
||||
initial_value: "20" #Default mth3 Setting
|
||||
min_value: 5
|
||||
max_value: 200
|
||||
step: 5
|
||||
set_action:
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th3st = "mth3=" + str_sprintf("%.0f",x) +"\r\n";
|
||||
return std::vector<uint8_t>(th3st.begin(), th3st.end());
|
||||
- platform: template
|
||||
name: ${friendly_name} LD1125H rmax #rmax is max detection distance.
|
||||
id: LD1125H_rmax
|
||||
icon: "mdi:cogs"
|
||||
optimistic: true
|
||||
restore_value: true #If you don't want to store the setting at ESP, set it to false.
|
||||
initial_value: "8" #Default rmax Setting
|
||||
min_value: 0.4
|
||||
max_value: 12
|
||||
step: 0.1
|
||||
set_action:
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string rmaxst = "rmax=" + str_sprintf("%.1f",x) +"\r\n";
|
||||
return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
|
||||
- platform: template
|
||||
name: ${friendly_name} LD1125H Clearence Time
|
||||
id: LD1125H_Clear_Time
|
||||
icon: "mdi:cogs"
|
||||
optimistic: true
|
||||
restore_value: true #If you don't want to store the setting at ESP, set it to false.
|
||||
initial_value: "5" #LD1125H Mov/Occ > Clearence Time Here
|
||||
min_value: 0.5
|
||||
max_value: 20
|
||||
step: 0.5
|
||||
- platform: template
|
||||
name: ${friendly_name} LD1125H Movement Time
|
||||
id: LD1125H_Mov_Time
|
||||
icon: "mdi:cogs"
|
||||
optimistic: true
|
||||
restore_value: true #If you don't want to store the setting at ESP, set it to false.
|
||||
initial_value: "1" #LD1125H Mov > Occ Time Here
|
||||
min_value: 0.5
|
||||
max_value: 10
|
||||
step: 0.5
|
||||
|
||||
#############################################
|
||||
# General Sensors
|
||||
# https://esphome.io/components/sensor/index.html
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: bme280_i2c
|
||||
temperature:
|
||||
name: "Temperature"
|
||||
accuracy_decimals: 1
|
||||
oversampling: 2x
|
||||
pressure:
|
||||
name: "Pressure"
|
||||
oversampling: 2x
|
||||
humidity:
|
||||
name: "Humidity"
|
||||
accuracy_decimals: 1
|
||||
oversampling: 2x
|
||||
address: 0x76
|
||||
update_interval: ${update_interval}
|
||||
|
||||
- platform: template
|
||||
name: "mmWave Distance"
|
||||
id: LD1125H_Distance
|
||||
icon: "mdi:signal-distance-variant"
|
||||
unit_of_measurement: "m"
|
||||
accuracy_decimals: 2
|
||||
filters: # Use Fliter To Debounce
|
||||
- sliding_window_moving_average:
|
||||
window_size: 8
|
||||
send_every: 2
|
||||
- heartbeat: 0.2s
|
||||
|
||||
#############################################
|
||||
# Text Sensors
|
||||
# refer https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
text_sensor:
|
||||
- platform: serial
|
||||
uart_id: LD1125H_UART_BUS
|
||||
name: ${friendly_name} LD1125H UART Text
|
||||
id: LD1125H_UART_Text
|
||||
icon: "mdi:format-text"
|
||||
internal: True #If Don't Want to See UART Receive Data, Set To True
|
||||
on_value:
|
||||
lambda: |-
|
||||
if (id(LD1125H_UART_Text).state.substr(0,3) == "occ") {
|
||||
id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str()));
|
||||
if ((time(NULL)-id(LD1125H_Last_Mov_Time))>id(LD1125H_Mov_Time).state) {
|
||||
id(LD1125H_Occupancy).publish_state("Occupancy");
|
||||
if (id(LD1125H_MovOcc_Binary).state == false) {
|
||||
id(LD1125H_MovOcc_Binary).publish_state(true);
|
||||
}
|
||||
if (id(LD1125H_Mov_Binary).state == true) {
|
||||
id(LD1125H_Mov_Binary).publish_state(false);
|
||||
}
|
||||
}
|
||||
if (id(LD1125H_MovOcc_Binary).state == false) {
|
||||
id(LD1125H_MovOcc_Binary).publish_state(true);
|
||||
}
|
||||
id(LD1125H_Last_Time) = time(NULL);
|
||||
if (id(LD1125H_Clearence_Status) == true) {
|
||||
id(LD1125H_Clearence_Status) = false;
|
||||
}
|
||||
}
|
||||
else if (id(LD1125H_UART_Text).state.substr(0,3) == "mov") {
|
||||
id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str()));
|
||||
id(LD1125H_Occupancy).publish_state("Movement");
|
||||
if (id(LD1125H_MovOcc_Binary).state == false) {
|
||||
id(LD1125H_MovOcc_Binary).publish_state(true);
|
||||
}
|
||||
if (id(LD1125H_Mov_Binary).state == false) {
|
||||
id(LD1125H_Mov_Binary).publish_state(true);
|
||||
}
|
||||
id(LD1125H_Last_Mov_Time) = time(NULL);
|
||||
id(LD1125H_Last_Time) = time(NULL);
|
||||
if (id(LD1125H_Clearence_Status) == true) {
|
||||
id(LD1125H_Clearence_Status) = false;
|
||||
}
|
||||
}
|
||||
- platform: template
|
||||
name: "mmWave Occupancy"
|
||||
id: LD1125H_Occupancy
|
||||
icon: "mdi:motion-sensor"
|
||||
|
||||
#############################################
|
||||
# Binary Sensors
|
||||
# https://esphome.io/components/binary_sensor/index.html
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: status
|
||||
name: ${friendly_name} Status
|
||||
- platform: template
|
||||
name: "mmWave Occupancy or Movement"
|
||||
id: LD1125H_MovOcc_Binary
|
||||
device_class: occupancy
|
||||
- platform: template
|
||||
name: "mmWave Movement"
|
||||
id: LD1125H_Mov_Binary
|
||||
device_class: motion
|
||||
@@ -1,456 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# HiLink LD2410 mmWave sensor, with BME280 Temp/Hum/Pres Sensor and PIR on an ESP32
|
||||
# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/tree/main
|
||||
# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/blob/main/LD1125H/ESP32-LD1125H-Complete.yaml
|
||||
#
|
||||
# https://esphome.io/components/sensor/ld2410.html
|
||||
# https://www.simplysmart.house/blog/presence-detection-ld2410-home-assistant
|
||||
#
|
||||
# The B and c versions of this device can use Bluetooth, but we are not using it here.
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# VARIABLE SUBSTITUTIONS
|
||||
# Give the device a useful name & description here
|
||||
# and change values accordingly.
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: "esp-occupancystair"
|
||||
friendly_name: "Stair Occupancy and Underhouse Environment"
|
||||
description_comment: "D1 Mini ESP32 with LD2410 mmWave for internal stairwell and environment sensors for under house"
|
||||
#wifi_ssid: !secret wifi_ssid
|
||||
#wifi_password: !secret wifi_password
|
||||
#fallback_ap_password: !secret fallback_ap_password
|
||||
#Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
#static_ip_address: !secret esp-occupancystair_static_ip
|
||||
#static_ip_gateway: !secret esp-occupancystair_gateway
|
||||
#static_ip_subnet: !secret esp-occupancystair_subnet
|
||||
api_key: !secret esp-occupancystair_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-occupancystair_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-occupancystair_ip
|
||||
|
||||
mqtt_server: !secret mqtt_server
|
||||
mqtt_username: !secret mqtt_username
|
||||
mqtt_password: !secret mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
update_time: 30s #update time for for general temp sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_api_key: ${api_key}
|
||||
local_ota_pass: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0
|
||||
#on_boot: #Initial Setting, will remember previous values (if set)
|
||||
#priority: -200
|
||||
#then:
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
#type: arduino
|
||||
type: esp-idf #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang.
|
||||
version: recommended #recommended, latest or dev
|
||||
|
||||
#############################################
|
||||
# i2s bus
|
||||
# https://esphome.io/components/i2c.html
|
||||
#############################################
|
||||
i2c:
|
||||
sda: GPIO19
|
||||
scl: GPIO21
|
||||
scan: True
|
||||
frequency: 100kHz #10, 50, 100, 200, 800 are possible settings, 100kHz was reliable for me
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
#api:
|
||||
# encryption:
|
||||
# key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
#ota:
|
||||
# - platform: esphome
|
||||
# password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
#safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
#wifi:
|
||||
# ssid: ${wifi_ssid}
|
||||
# password: ${wifi_password}
|
||||
#power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
#manual_ip: #optional static IP address
|
||||
#static_ip: ${static_ip_address}
|
||||
#gateway: ${static_ip_gateway}
|
||||
#subnet: ${static_ip_subnet}
|
||||
# ap: #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
# ssid: ${devicename} fallback AP
|
||||
# password: ${fallback_ap_password}
|
||||
# ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is probably a good idea to save resources.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} #probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: False # enable entity discovery (true is default)
|
||||
discover_ip: False # enable device discovery (true is default)
|
||||
|
||||
#############################################
|
||||
# Bluetooth
|
||||
# https://esphome.io/components/bluetooth_proxy.html
|
||||
# https://esphome.io/components/esp32_ble_tracker.html
|
||||
# Remember that this takes a LOT of processing. On the
|
||||
# ESP32, enable the IDF framework, and disable the
|
||||
# Web server component. Changing to the IDF framework
|
||||
# needs to be via cable not OTA to change the
|
||||
# partition setup.
|
||||
#############################################
|
||||
#bluetooth_proxy:
|
||||
|
||||
#esp32_ble_tracker:
|
||||
|
||||
#############################################
|
||||
# UART Serial
|
||||
# hardware on EPS32, but software, and can be glitchy on ESP8266
|
||||
# https://esphome.io/components/uart.html?highlight=uart
|
||||
#############################################
|
||||
uart:
|
||||
id: ld2410_uart
|
||||
rx_pin: GPIO16 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
|
||||
tx_pin: GPIO17 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
|
||||
baud_rate: 256000 # default for LD2410 is 25600, 8, 0, NONE
|
||||
data_bits: 8
|
||||
stop_bits: 1
|
||||
parity: NONE
|
||||
|
||||
#############################################
|
||||
# General esp status LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2 #ESP32 Onboard LED
|
||||
ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
|
||||
inverted: false
|
||||
|
||||
#############################################
|
||||
# LD2410 Sensors
|
||||
# https://esphome.io/components/sensor/ld2410.html
|
||||
# https://www.hlktech.net/index.php?id=988
|
||||
#############################################
|
||||
ld2410:
|
||||
uart_id: ld2410_uart
|
||||
#uart_id (Optional, ID): Manually specify the ID of the UART Component if you want to use multiple UART buses.
|
||||
#throttle (Optional, int): Time in milliseconds to control the rate of data updates. Defaults to 1000ms.
|
||||
#id (Optional, ID): Manually specify the ID for this LD2410 Sensor component if you need multiple components.
|
||||
|
||||
# light (Optional, int): When in engineering mode, indicates the light sensitivity, otherwise unknown. Value between 0 and 255 inclusive. Though it seems that the value 85 is the lowest value at complete darkness. All options from Sensor.
|
||||
# moving_distance (Optional, int): Distance in cm of detected moving target. All options from Sensor.
|
||||
# still_distance (Optional, int): Distance in cm of detected still target. All options from Sensor.
|
||||
# moving_energy (Optional, int): Energy for moving target. Value between 0 and 100 inclusive. All options from Sensor.
|
||||
# still_energy (Optional, int): Energy for still target. Value between 0 and 100 inclusive. All options from Sensor.
|
||||
# detection_distance (Optional, int): Distance in cm of target. All options from Sensor.
|
||||
# gX (Optional): Energies for the Xth gate (X => 0 to 8).
|
||||
# move_energy (Optional, int): When in engineering mode, the move energy of the gate, otherwise unknown. Value between 0 and 100 inclusive. All options from Sensor.
|
||||
#still_energy (Optional, int): When in engineering mode, the still energy of the gate, otherwise unknown. Value between 0 and 100 inclusive. All options from Sensor.
|
||||
#ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
|
||||
|
||||
#The ld2410 number values for setting thresholds
|
||||
# timeout: 5s
|
||||
# max_move_distance: 2.25m
|
||||
# max_still_distance: 2.25m
|
||||
# g0_move_threshold: 40 # 0m / 0'
|
||||
# g0_still_threshold: 10 # 0m / 0'
|
||||
# g1_move_threshold: 40 # 0 - 0.75m / 0 - 2.46'
|
||||
# g1_still_threshold: 10 # 0 - 0.75m / 0 - 2.46'
|
||||
# g2_move_threshold: 40 # 0.75 - 1.5m / 2.46' - 4.92'
|
||||
# g2_still_threshold: 10 # 0.75 - 1.5m / 2.46' - 4.92'
|
||||
# g3_move_threshold: 40 # 1.5 - 2.25m / 4.92' - 7.38'
|
||||
# g3_still_threshold: 10 # 1.5 - 2.25m / 4.92' - 7.38'
|
||||
# g4_move_threshold: 40 # 2.25 - 3m' / 7.38' - 9.84'
|
||||
# g4_still_threshold: 40 # 2.25 - 3m' / 7.38' - 9.84'
|
||||
# g5_move_threshold: 40 # 3 - 3.75 / 9.84' - 12.30'
|
||||
# g5_still_threshold: 40 # 3 - 3.75 / 9.84' - 12.30'
|
||||
# g6_move_threshold: 30 # 3.75 - 4.5m / 12.30' - 14.76'
|
||||
# g6_still_threshold: 15 # 3.75 - 4.5m / 12.30' - 14.76'
|
||||
# g7_move_threshold: 30 # 4.5 - 5.25m / 14.76' - 17.22'
|
||||
# g7_still_threshold: 15 # 4.5 - 5.25m / 14.76' - 17.22'
|
||||
# g8_move_threshold: 30 # 5.25 - 6m / 17.22' - 19.68'
|
||||
# g8_still_threshold: 15 # 5.25 - 6m / 17.22' - 19.68'
|
||||
number:
|
||||
- platform: ld2410
|
||||
timeout:
|
||||
name: Timeout
|
||||
light_threshold:
|
||||
name: Light Threshold
|
||||
max_move_distance_gate:
|
||||
name: Max Move Distance Gate
|
||||
max_still_distance_gate:
|
||||
name: Max Still Distance Gate
|
||||
g0:
|
||||
move_threshold:
|
||||
name: g0 move threshold
|
||||
still_threshold:
|
||||
name: g0 still threshold
|
||||
g1:
|
||||
move_threshold:
|
||||
name: g1 move threshold
|
||||
still_threshold:
|
||||
name: g1 still threshold
|
||||
g2:
|
||||
move_threshold:
|
||||
name: g2 move threshold
|
||||
still_threshold:
|
||||
name: g2 still threshold
|
||||
g3:
|
||||
move_threshold:
|
||||
name: g3 move threshold
|
||||
still_threshold:
|
||||
name: g3 still threshold
|
||||
g4:
|
||||
move_threshold:
|
||||
name: g4 move threshold
|
||||
still_threshold:
|
||||
name: g4 still threshold
|
||||
g5:
|
||||
move_threshold:
|
||||
name: g5 move threshold
|
||||
still_threshold:
|
||||
name: g5 still threshold
|
||||
g6:
|
||||
move_threshold:
|
||||
name: g6 move threshold
|
||||
still_threshold:
|
||||
name: g6 still threshold
|
||||
g7:
|
||||
move_threshold:
|
||||
name: g7 move threshold
|
||||
still_threshold:
|
||||
name: g7 still threshold
|
||||
g8:
|
||||
move_threshold:
|
||||
name: g8 move threshold
|
||||
still_threshold:
|
||||
name: g8 still threshold
|
||||
|
||||
#The ld2410 select allows you to control your LD2410 Sensor.
|
||||
#distance_resolution (Optional): Control the gates distance resolution. Can be 0.75m or 0.2m. Defaults to 0.75m. All options from Select.
|
||||
#baud_rate (Optional): Control the serial port baud rate. Defaults to 256000. Once changed, all sensors will stop working until a fresh install with an updated UART Component configuration. All options from Select.
|
||||
#light_function (Optional): If set, will affect the OUT pin value, based on light threshold. Can be off, low or above. Defaults to off. All options from Select.
|
||||
#out_pin_level (Optional): Control OUT pin away value. Can be low or high. Defaults to low. All options from Select.
|
||||
#ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
|
||||
select:
|
||||
- platform: ld2410
|
||||
distance_resolution:
|
||||
name: ${friendly_name} LD2140 Distance Resolution
|
||||
baud_rate:
|
||||
name: ${friendly_name} LD2140 Baud Rate
|
||||
light_function:
|
||||
name: ${friendly_name} LD2140 Light Function
|
||||
out_pin_level:
|
||||
name: ${friendly_name} LD2140 Out Pin Level
|
||||
|
||||
#############################################
|
||||
# General Sensors
|
||||
# https://esphome.io/components/sensor/index.html
|
||||
#############################################
|
||||
sensor:
|
||||
- platform: bme280_i2c
|
||||
temperature:
|
||||
name: ${friendly_name} BME280 Temp
|
||||
accuracy_decimals: 1
|
||||
oversampling: 2x
|
||||
pressure:
|
||||
name: ${friendly_name} BME280 Pressure
|
||||
oversampling: 2x
|
||||
humidity:
|
||||
name: ${friendly_name} BME280 Humidity
|
||||
accuracy_decimals: 1
|
||||
oversampling: 2x
|
||||
address: 0x76
|
||||
update_interval: ${update_time}
|
||||
- platform: uptime
|
||||
name: ${friendly_name} Uptime
|
||||
#The ld2410 sensor values
|
||||
- platform: ld2410
|
||||
light:
|
||||
name: Light
|
||||
moving_distance:
|
||||
name : Moving Distance
|
||||
still_distance:
|
||||
name: Still Distance
|
||||
moving_energy:
|
||||
name: Move Energy
|
||||
still_energy:
|
||||
name: Still Energy
|
||||
detection_distance:
|
||||
name: Detection Distance
|
||||
g0:
|
||||
move_energy:
|
||||
name: g0 move energy
|
||||
still_energy:
|
||||
name: g0 still energy
|
||||
g1:
|
||||
move_energy:
|
||||
name: g1 move energy
|
||||
still_energy:
|
||||
name: g1 still energy
|
||||
g2:
|
||||
move_energy:
|
||||
name: g2 move energy
|
||||
still_energy:
|
||||
name: g2 still energy
|
||||
g3:
|
||||
move_energy:
|
||||
name: g3 move energy
|
||||
still_energy:
|
||||
name: g3 still energy
|
||||
g4:
|
||||
move_energy:
|
||||
name: g4 move energy
|
||||
still_energy:
|
||||
name: g4 still energy
|
||||
g5:
|
||||
move_energy:
|
||||
name: g5 move energy
|
||||
still_energy:
|
||||
name: g5 still energy
|
||||
g6:
|
||||
move_energy:
|
||||
name: g6 move energy
|
||||
still_energy:
|
||||
name: g6 still energy
|
||||
g7:
|
||||
move_energy:
|
||||
name: g7 move energy
|
||||
still_energy:
|
||||
name: g7 still energy
|
||||
g8:
|
||||
move_energy:
|
||||
name: g8 move energy
|
||||
still_energy:
|
||||
name: g8 still energy
|
||||
|
||||
# The ld2410 switch allows you to control your LD2410 Sensor.
|
||||
#Bluetooth switch is only useful of you have a B or C model
|
||||
switch:
|
||||
- platform: ld2410
|
||||
engineering_mode:
|
||||
name: ${friendly_name} LD2140 Engineering Mode
|
||||
#bluetooth:
|
||||
#name: ${friendly_name} LD2140 Control Bluetooth
|
||||
|
||||
#The ld2410 binary sensors to get presence notification
|
||||
binary_sensor:
|
||||
- platform: ld2410
|
||||
has_target:
|
||||
name: ${friendly_name} Presence
|
||||
has_moving_target:
|
||||
name: ${friendly_name} Moving Target
|
||||
has_still_target:
|
||||
name: ${friendly_name} Still Target
|
||||
out_pin_presence_status:
|
||||
name: ${friendly_name} LD2140 Out Pin Presence Status
|
||||
|
||||
#Standard PIR Sensor
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO13
|
||||
mode:
|
||||
input: true
|
||||
pullup: true
|
||||
inverted: true
|
||||
name: ${friendly_name} PIR Sensor
|
||||
device_class: motion
|
||||
|
||||
#The ld2410 button allows resetting
|
||||
button:
|
||||
- platform: ld2410
|
||||
factory_reset:
|
||||
name: ${friendly_name} LD2140 Factory reset"
|
||||
restart:
|
||||
name: ${friendly_name} LD2140 Restart
|
||||
query_params:
|
||||
name: Query Parameters
|
||||
|
||||
#The ld2410 text sensor allows you to get information about your LD2410 Sensor.
|
||||
#Bluetooth sensor is only useful of you have a B or C model
|
||||
text_sensor:
|
||||
- platform: ld2410
|
||||
version:
|
||||
name: ${friendly_name} LD2140 Firmware Version
|
||||
#mac_address:
|
||||
#name: ${friendly_name} LD2140 BT MAC Address
|
||||
|
||||
|
||||
@@ -1,30 +0,0 @@
|
||||
esphome:
|
||||
name: laundry-washer-power
|
||||
friendly_name: Laundry Washer Power
|
||||
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
# Enable logging
|
||||
logger:
|
||||
|
||||
# Enable Home Assistant API
|
||||
api:
|
||||
encryption:
|
||||
key: "24fFKajbAkapEa24hpnFOpNrM2uJ11WM9k5E3sI4AGU="
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: "32516b91a48d43b4cdf0f13fc145752e"
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
# Enable fallback hotspot (captive portal) in case wifi connection fails
|
||||
ap:
|
||||
ssid: "Laundry-Washer-Power"
|
||||
password: "tSoGV9xt4c2n"
|
||||
|
||||
captive_portal:
|
||||
|
||||
@@ -1,76 +0,0 @@
|
||||
#substitutions:
|
||||
# local_gpioinvert: "True"
|
||||
# local_singleclick_duration: "300000" # 5 minutes in ms
|
||||
# local_doubleclick_duration: "1800000" # 30 minutes in ms
|
||||
# local_tripleclick_duration: "7200000" # 2 hours in ms
|
||||
|
||||
#globals:
|
||||
# - id: single_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_singleclick_duration}
|
||||
# - id: double_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_doubleclick_duration}
|
||||
# - id: triple_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_tripleclick_duration}
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: ${local_gpio}
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: ${local_name}
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(local_relay_id).state) {
|
||||
ESP_LOGD(id(local_gpio},"Single click: ",id(local_relay_id)," is on, turning it off.");
|
||||
id(local_relay_id).turn_off();
|
||||
} else {
|
||||
ESP_LOGD(id(local_gpio), "Single click: ",id(local_relay_id)," is off, turning it on for %d ms.", id(local_singleclick_duraton));
|
||||
id(local_relay_id).turn_on();
|
||||
delay(id(local_singleclick_duration));
|
||||
id(local_relay_id).turn_off();
|
||||
}
|
||||
# Double Click: two quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(id(local_gpio), "Double click detected: turning ",id(local_relay_id)," on for %d ms.", id(local_doubleclick_duration));
|
||||
id(local_relay_id).turn_on();
|
||||
delay(id(local_doubleclick_duration));
|
||||
id(local_relay_id).turn_off();
|
||||
# Triple Click: three quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(id(local_gpio), "Triple click detected: turning ",id(local_relay_id)," on for %d ms.", id(local_tripleclick_duration));
|
||||
id(local_relay_id).turn_on();
|
||||
delay(id(local_tripleclick_duration));
|
||||
id(local_relay_id).turn_off();
|
||||
# Hold: button held for at least 4 seconds
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(id(local_gpio), "Hold detected: turning ",id(local_relay_id)," on indefinitely.");
|
||||
id(local_relay_id).turn_on();
|
||||
@@ -1,76 +0,0 @@
|
||||
defaults:
|
||||
local_gpioinvert: "True"
|
||||
local_singleclick_duration: "300000" # 5 minutes in ms
|
||||
local_doubleclick_duration: "1800000" # 30 minutes in ms
|
||||
local_tripleclick_duration: "7200000" # 2 hours in ms
|
||||
|
||||
#globals:
|
||||
# - id: single_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_singleclick_duration}
|
||||
# - id: double_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_doubleclick_duration}
|
||||
# - id: triple_click_delay
|
||||
# type: long
|
||||
# restore_value: no
|
||||
# initial_value: ${local_tripleclick_duration}
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: ${local_gpio}
|
||||
mode: INPUT
|
||||
inverted: ${local_gpioinvert}
|
||||
name: ${local_name}
|
||||
on_multi_click:
|
||||
# Single Click: one press (short press/release)
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(${local_relay_id}).state) {
|
||||
ESP_LOGD("${local_gpio}", "Single click: ${local_relay_id} is on, turning it off.");
|
||||
id(${local_relay_id}).turn_off();
|
||||
} else {
|
||||
ESP_LOGD("${local_gpio}", "Single click: ${local_relay_id} is off, turning it on for %d ms.", id(single_click_delay));
|
||||
id(${local_relay_id}).turn_on();
|
||||
delay(id(single_click_delay));
|
||||
id(${local_relay_id}).turn_off();
|
||||
}
|
||||
# Double Click: two quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(${local_gpio}, "Double click detected: turning ",${local_relay_id}," on for %d ms.", id(double_click_delay));
|
||||
id(${local_relay_id}).turn_on();
|
||||
delay(id(double_click_delay));
|
||||
id(${local_relay_id}).turn_off();
|
||||
# Triple Click: three quick press/release cycles
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at most 1s
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(${local_gpio}, "Triple click detected: turning ",${local_relay_id}," on for %d ms.", id(triple_click_delay));
|
||||
id(${local_relay_id}).turn_on();
|
||||
delay(id(triple_click_delay));
|
||||
id(${local_relay_id}).turn_off();
|
||||
# Hold: button held for at least 4 seconds
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD(${local_gpio}, "Hold detected (threshold %d ms): turning ",${local_relay_id}," on indefinitely.");
|
||||
id(${local_relay_id}).turn_on();
|
||||
@@ -1,66 +0,0 @@
|
||||
##############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace
|
||||
# these with the values (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
timezone: "Pacific/Auckland"
|
||||
sntp_update_interval: 6h # Set the duration between the sntp service polling
|
||||
# Network time servers https://www.ntppool.org/zone/@
|
||||
sntp_server_1: !secret ntp_server_1
|
||||
sntp_server_2: !secret ntp_server_2
|
||||
sntp_server_3: !secret ntp_server_3
|
||||
|
||||
#############################################
|
||||
# Real time clock time source for ESPHome
|
||||
# If it's invalid, we fall back to an internal clock
|
||||
# https://esphome.io/components/time/index.html
|
||||
# https://esphome.io/components/time/sntp
|
||||
#############################################
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: ${sntp_update_interval}
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
|
||||
text_sensor:
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
- platform: template
|
||||
name: 'Last Restart'
|
||||
id: device_last_restart
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
# device_class: timestamp
|
||||
|
||||
- platform: template
|
||||
name: "Internal Time"
|
||||
id: time_text
|
||||
update_interval: "1min"
|
||||
entity_category: diagnostic
|
||||
lambda: |-
|
||||
auto time_text = id(sntp_time).now().strftime("%H:%M:%S - %d-%m-%Y");
|
||||
return { time_text };
|
||||
|
||||
- platform: template
|
||||
name: "Time Sync Status"
|
||||
id: time_sync
|
||||
update_interval: "1min"
|
||||
entity_category: diagnostic
|
||||
@@ -66,6 +66,7 @@ substitutions:
|
||||
static_ip_address: !secret esp-downstbathtowelrail_ip
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:heating-coil"
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "20s" # update time for for general sensors etc
|
||||
|
||||
@@ -167,20 +168,33 @@ preferences:
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
####################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
# Relay Switch (Sonoff Basic Relay on GPIO12)
|
||||
####################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Towel Rail Power"
|
||||
pin: GPIO12
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
icon: "${relay_icon}"
|
||||
|
||||
##########################################################################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
#############################################
|
||||
##########################################################################################
|
||||
globals:
|
||||
|
||||
# Tracks the time (in seconds from midnight) at the previous boot
|
||||
@@ -198,19 +212,19 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
@@ -222,7 +236,7 @@ globals:
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -235,7 +249,7 @@ globals:
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "3"
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
@@ -258,10 +272,10 @@ globals:
|
||||
restore_value: false
|
||||
initial_value: "0"
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
text_sensor:
|
||||
|
||||
############################
|
||||
@@ -375,19 +389,14 @@ text_sensor:
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
# MQTT subscription: set mode, then immediately re-evaluate relay
|
||||
- platform: mqtt_subscribe
|
||||
name: "Operation Mode Setting"
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation" # BOOST,ON,OFF,TIMER
|
||||
topic: "${mqtt_timer_topic}/operation"
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
/*
|
||||
* In standard C++ (ESPHome), no 'equalsIgnoreCase()'.
|
||||
* We use 'strcasecmp' for case-insensitive compare.
|
||||
* Returns 0 if they match ignoring case.
|
||||
*/
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
@@ -399,11 +408,12 @@ text_sensor:
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "BOOST") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to BOOST");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, BOOST)
|
||||
@@ -480,27 +490,61 @@ text_sensor:
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Boost time" time as text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Boost Time"
|
||||
lambda: |-
|
||||
// e.g. "120 Mins"
|
||||
return std::to_string(id(boost_duration)) + " Mins";
|
||||
update_interval: "${update_interval}"
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
filters:
|
||||
- delayed_on: 20ms
|
||||
on_click:
|
||||
- min_length: 20ms
|
||||
max_length: 500ms
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(relay).state) {
|
||||
// Relay is ON: turn it OFF and set mode to 0 (TIMER)
|
||||
id(relay).turn_off();
|
||||
id(operation_mode) = 2;
|
||||
} else {
|
||||
// Relay is OFF: turn it ON and set mode to 3 (BOOST)
|
||||
id(relay).turn_on();
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
|
||||
#############################################
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
##########################################################################################
|
||||
# Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
name: "Timeclock: Boost Duration"
|
||||
id: boost_duration_time
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: 0
|
||||
accuracy_decimals: "0"
|
||||
update_interval: "${update_interval}"
|
||||
internal: True
|
||||
lambda: |-
|
||||
return id(boost_duration);
|
||||
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
id: mins_from_midnight
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
update_interval: "${update_interval}"
|
||||
internal: True # No need to show this in Home Assistant
|
||||
lambda: |-
|
||||
return id(current_mins);
|
||||
|
||||
@@ -530,15 +574,6 @@ sensor:
|
||||
// never return negative
|
||||
return rem > 0 ? rem : 0;
|
||||
|
||||
####################################################
|
||||
# Relay Switch (Sonoff Basic Relay on GPIO12)
|
||||
####################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Towel Rail Power"
|
||||
pin: GPIO12
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
|
||||
#################################################################################################
|
||||
# BUTTON COMPONENT
|
||||
@@ -548,17 +583,14 @@ button:
|
||||
- platform: template
|
||||
name: "Boost now"
|
||||
id: boost_button
|
||||
icon: "mdi:play-circle-outline" # optional, pick any MaterialDesign icon you like
|
||||
icon: "mdi:play-circle-outline"
|
||||
on_press:
|
||||
then:
|
||||
# 1) set the mode to BOOST (3)
|
||||
# 1) reset BOOST timer and set mode
|
||||
- lambda: |-
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(operation_mode) = 3; // Set to BOOST
|
||||
ESP_LOGD("main", "operation_mode set to %d via BOOST button", id(operation_mode));
|
||||
# 2) turn on the relay switch
|
||||
- switch.turn_on:
|
||||
id: relay
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
@@ -568,14 +600,14 @@ select:
|
||||
- platform: template
|
||||
name: "Operation Mode"
|
||||
id: operation_mode_select
|
||||
update_interval: 5s # poll every 5 s for external changes
|
||||
update_interval: 5s
|
||||
options:
|
||||
- "OFF"
|
||||
- "ON"
|
||||
- "TIMER"
|
||||
- "BOOST"
|
||||
|
||||
# Getter: maps your integer into one of the four strings
|
||||
# show the current mode
|
||||
lambda: |-
|
||||
switch (id(operation_mode)) {
|
||||
case 1: return std::string("ON");
|
||||
@@ -584,109 +616,83 @@ select:
|
||||
default: return std::string("OFF");
|
||||
}
|
||||
|
||||
# set_action: called when you pick an option in HA
|
||||
# when changed in HA, set mode & re-evaluate
|
||||
set_action:
|
||||
- lambda: |-
|
||||
if (x == "OFF") id(operation_mode) = 0;
|
||||
else if (x == "ON") id(operation_mode) = 1;
|
||||
else if (x == "TIMER") id(operation_mode) = 2;
|
||||
else {
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(operation_mode) = 3; /* BOOST */
|
||||
if (x == "OFF") { id(operation_mode) = 0; }
|
||||
else if (x == "ON") { id(operation_mode) = 1; }
|
||||
else if (x == "TIMER") { id(operation_mode) = 2; }
|
||||
else { // BOOST
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
ESP_LOGD("main", "operation_mode set to %d", id(operation_mode));
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
####################################################
|
||||
# Check every minute to decide relay state
|
||||
####################################################
|
||||
interval:
|
||||
- interval: "1min" # Must be 1min as this is used to calculate times
|
||||
#################################################################################################
|
||||
# SCRIPT COMPONENT
|
||||
# https://esphome.io/components/script.html
|
||||
#################################################################################################
|
||||
# Script: evaluate and drive the relay
|
||||
script:
|
||||
- id: evaluate_relay_state
|
||||
then:
|
||||
- lambda: |-
|
||||
// Do we have correct time from SNTP? If not...
|
||||
int mode = id(operation_mode);
|
||||
|
||||
// BOOST just forces the relay on
|
||||
if (mode == 3) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// OFF → always off
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
// ON → always on
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// TIMER → follow schedule windows
|
||||
{
|
||||
bool should_on = false;
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
|
||||
should_on = true;
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
|
||||
should_on = true;
|
||||
if (should_on) id(relay).turn_on();
|
||||
else id(relay).turn_off();
|
||||
}
|
||||
|
||||
#################################################################################################
|
||||
# INTERVAL COMPONENT
|
||||
# https://esphome.io/components/interval.html
|
||||
#################################################################################################
|
||||
# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
|
||||
interval:
|
||||
- interval: "1min"
|
||||
then:
|
||||
- lambda: |-
|
||||
// — update current_mins via SNTP or fallback
|
||||
if (!id(sntp_time).now().is_valid()) {
|
||||
id(current_mins) += 1;
|
||||
id(current_mins)++;
|
||||
if (id(current_mins) >= 1440) id(current_mins) = 0;
|
||||
} else {
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// operation_mode:
|
||||
// 0 = OFF
|
||||
// 1 = ON
|
||||
// 2 = TIMER
|
||||
// 3 = BOOST
|
||||
int mode = id(operation_mode);
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// BOOST MODE: Relay ON for 'boost_duration'
|
||||
// minutes, then automatically revert to TIMER.
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 3) {
|
||||
id(boost_timer) = id(boost_timer) + 1 ; // works as long as update_interval in seconds
|
||||
// Compare with the substitution boost_duration
|
||||
if (id(boost_timer) < id(boost_duration)) {
|
||||
// Still within the BOOST period => turn relay on
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
// After 'boost_duration' minutes => switch to TIMER
|
||||
// — if in BOOST, advance boost_timer and expire when done
|
||||
if (id(operation_mode) == 3) {
|
||||
id(boost_timer)++;
|
||||
if (id(boost_timer) >= id(boost_duration)) {
|
||||
id(operation_mode) = 2;
|
||||
id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
// Skip the rest of the logic
|
||||
ESP_LOGI("boost_timer", "boost_timer=%d", id(boost_timer));
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// OFF MODE => always off
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// ON MODE => always on
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// TIMER MODE => follow morning/evening schedule
|
||||
// using SNTP if valid, else current_mins
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 2)
|
||||
{
|
||||
|
||||
bool should_on = false;
|
||||
|
||||
// Check morning window
|
||||
// Example: morning_on=360 => 06:00, morning_off=480 => 08:00
|
||||
// If current_mins in [360..480), should_on = true
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Check evening window
|
||||
// Example: evening_on=1260 => 21:00, evening_off=1440 => midnight
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Final relay state based on schedule
|
||||
if (should_on) {
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
id(relay).turn_off();
|
||||
//id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
|
||||
@@ -1,36 +1,35 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DOWNSTAIRS DISHWASHER POWER MONITOR
|
||||
# Controlled by a Athom Smart Plug V3
|
||||
#
|
||||
# dashboard_import:
|
||||
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
# Controlled by a Athom Smart Plug V1
|
||||
# package_import_url: github://athom-tech/athom-configs/athom-smart-plug.yaml
|
||||
#
|
||||
# V1.2 2025-06-15 Changed to Athom V1
|
||||
# V1.1 2025-06-12 Tidyups and packages added
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-downstdishwasher"
|
||||
device_name: "esp-downstdishwpower"
|
||||
friendly_name: "Downstairs Dishwasher Power"
|
||||
description_comment: "Downstairs Dishwasher Power :: Athom Smart Plug Power V3"
|
||||
description_comment: "Downstairs Dishwasher Power :: Athom Smart Plug Power V1"
|
||||
device_area: "Downstairs Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V3" # Project Details
|
||||
project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_name: "Athom Technology.Smart Plug V1" # Project Details
|
||||
project_version: "v1.2" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-downstdishwasher_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-downstdishwasher_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstdishwasher_ip
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstdishwpower_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
@@ -40,10 +39,10 @@ substitutions:
|
||||
relay_icon: "mdi:power-socket-au"
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
##########################################################################################
|
||||
# PACKAGES
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
@@ -69,15 +68,16 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV3: !include
|
||||
file: common/athompowermonv3_common.yaml
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
@@ -88,33 +88,25 @@ esphome:
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp32:
|
||||
board: esp32-c3-devkitm-1
|
||||
flash_size: 4MB
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: esp-idf # "esp-idf" OR "arduino". Suggested ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang.
|
||||
version: recommended # recommended, latest or dev
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
flash_write_interval: 10min
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
@@ -149,14 +141,9 @@ binary_sensor:
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Power Output"
|
||||
pin: GPIO5
|
||||
pin: GPIO14
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF # Ensures the relay is restored (or off) at boot
|
||||
restore_mode: RESTORE_DEFAULT_ON # Ensures the relay is restored (or off) at boot
|
||||
#internal: true # Hides the switch from Home Assistant
|
||||
icon: "${relay_icon}"
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,9 +1,12 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# POOL LIGHT POWER AND TIMER
|
||||
# Controlled by a Athom Smart Plug V1
|
||||
# package_import_url: github://athom-tech/athom-configs/athom-smart-plug.yaml
|
||||
# POOL LIGHTS POWER AND TIMER
|
||||
# Controlled by a Athom Smart Plug V3
|
||||
#
|
||||
# dashboard_import:
|
||||
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
#
|
||||
# V2.3 2025-06-15 Changed to an Athom V3 (esp32)
|
||||
# V2.2 2025-06-14 Fixes to offline time when sntp/network unavailable
|
||||
# V2.1 2025-06-12 Added select and button to chose modes, added countdown & startup to boost
|
||||
# V2.0 2025-06-05 YAML Tidyups
|
||||
@@ -44,34 +47,35 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-poollightpower"
|
||||
friendly_name: "Pool Light Power"
|
||||
description_comment: "Pool Light Power :: Athom Smart Plug Power V1"
|
||||
device_area: "Downstairs Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
device_name: "esp-poollightspower"
|
||||
friendly_name: "Pool Lights Power"
|
||||
description_comment: "Pool Lights Power :: Athom Smart Plug Power V3"
|
||||
device_area: "Outside" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V1" # Project Details
|
||||
project_version: "v2.2" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_name: "Athom Technology.Smart Plug V3" # Project Details
|
||||
project_version: "v2.3" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-poollightpower_ip
|
||||
api_key: !secret esp-poollightspower_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-poollightspower_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-poollightspower_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
update_interval: "10s" # update time for for general sensors etc
|
||||
|
||||
# Device and Timer Settings
|
||||
relay_icon: "mdi:light-flood-up"
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
mqtt_timer_topic: "viewroad-commands/poollight-timer" # Topics you will use to change stuff
|
||||
mqtt_timer_topic: "viewroad-commands/poollights-timer" # Topics you will use to change stuff
|
||||
boost_duration_default: "180" # Minutes to stay ON in BOOST mode before reverting to TIMER
|
||||
morning_on_default: "450" # Default in minutes from midnight. Default 07:30 => 450
|
||||
morning_off_default: "450" # Default in minutes from midnight. Default 07:30 => 450 (same as ON as no need for morning schedule)
|
||||
@@ -79,7 +83,7 @@ substitutions:
|
||||
evening_off_default: "1350" # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
@@ -107,10 +111,9 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
common_athompowermonV3: !include
|
||||
file: common/athompowermonv3_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
##########################################################################################
|
||||
@@ -127,26 +130,31 @@ esphome:
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
|
||||
esp32:
|
||||
board: esp32-c3-devkitm-1
|
||||
flash_size: 4MB
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: esp-idf # "esp-idf" OR "arduino". Suggested ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang.
|
||||
version: recommended # recommended, latest or dev
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 10min
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
#dashboard_import:
|
||||
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
@@ -176,19 +184,19 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
@@ -200,7 +208,7 @@ globals:
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -353,19 +361,14 @@ text_sensor:
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
# MQTT subscription: set mode, then immediately re-evaluate relay
|
||||
- platform: mqtt_subscribe
|
||||
name: "Operation Mode Setting"
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation" # BOOST,ON,OFF,TIMER
|
||||
topic: "${mqtt_timer_topic}/operation"
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
/*
|
||||
* In standard C++ (ESPHome), no 'equalsIgnoreCase()'.
|
||||
* We use 'strcasecmp' for case-insensitive compare.
|
||||
* Returns 0 if they match ignoring case.
|
||||
*/
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
@@ -377,11 +380,12 @@ text_sensor:
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "BOOST") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to BOOST");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, BOOST)
|
||||
@@ -465,7 +469,7 @@ text_sensor:
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: 3
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
@@ -478,7 +482,7 @@ binary_sensor:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(relay).state) {
|
||||
// Relay is ON: turn it OFF and set mode to 0 (Timer)
|
||||
// Relay is ON: turn it OFF and set mode to 0 (TIMER)
|
||||
id(relay).turn_off();
|
||||
id(operation_mode) = 2;
|
||||
} else {
|
||||
@@ -498,7 +502,7 @@ binary_sensor:
|
||||
##########################################################################################
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Boost Duration"
|
||||
name: "Timeclock: Boost Duration"
|
||||
id: boost_duration_time
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
@@ -550,7 +554,7 @@ sensor:
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Power Output"
|
||||
pin: GPIO14
|
||||
pin: GPIO5
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF # Ensures the relay is restored (or off) at boot
|
||||
#internal: true # Hides the switch from Home Assistant
|
||||
@@ -564,17 +568,14 @@ button:
|
||||
- platform: template
|
||||
name: "Boost now"
|
||||
id: boost_button
|
||||
icon: "mdi:play-circle-outline" # optional, pick any MaterialDesign icon you like
|
||||
icon: "mdi:play-circle-outline"
|
||||
on_press:
|
||||
then:
|
||||
# 1) set the mode to BOOST (3)
|
||||
# 1) reset BOOST timer and set mode
|
||||
- lambda: |-
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(operation_mode) = 3; // Set to BOOST
|
||||
ESP_LOGD("main", "operation_mode set to %d via BOOST button", id(operation_mode));
|
||||
# 2) turn on the relay switch
|
||||
- switch.turn_on:
|
||||
id: relay
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
@@ -584,14 +585,14 @@ select:
|
||||
- platform: template
|
||||
name: "Operation Mode"
|
||||
id: operation_mode_select
|
||||
update_interval: 5s # poll every 5 s for external changes
|
||||
update_interval: 5s
|
||||
options:
|
||||
- "OFF"
|
||||
- "ON"
|
||||
- "TIMER"
|
||||
- "BOOST"
|
||||
|
||||
# Getter: maps your integer into one of the four strings
|
||||
# show the current mode
|
||||
lambda: |-
|
||||
switch (id(operation_mode)) {
|
||||
case 1: return std::string("ON");
|
||||
@@ -600,110 +601,83 @@ select:
|
||||
default: return std::string("OFF");
|
||||
}
|
||||
|
||||
# set_action: called when you pick an option in HA
|
||||
# when changed in HA, set mode & re-evaluate
|
||||
set_action:
|
||||
- lambda: |-
|
||||
if (x == "OFF") id(operation_mode) = 0;
|
||||
else if (x == "ON") id(operation_mode) = 1;
|
||||
else if (x == "TIMER") id(operation_mode) = 2;
|
||||
else {
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(operation_mode) = 3; /* BOOST */
|
||||
if (x == "OFF") { id(operation_mode) = 0; }
|
||||
else if (x == "ON") { id(operation_mode) = 1; }
|
||||
else if (x == "TIMER") { id(operation_mode) = 2; }
|
||||
else { // BOOST
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
ESP_LOGD("main", "operation_mode set to %d", id(operation_mode));
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
|
||||
####################################################
|
||||
# Check every minute to decide relay state
|
||||
####################################################
|
||||
interval:
|
||||
- interval: "1min" # Must be 1min as this is used to calculate times
|
||||
#################################################################################################
|
||||
# SCRIPT COMPONENT
|
||||
# https://esphome.io/components/script.html
|
||||
#################################################################################################
|
||||
# Script: evaluate and drive the relay
|
||||
script:
|
||||
- id: evaluate_relay_state
|
||||
then:
|
||||
- lambda: |-
|
||||
// Do we have correct time from SNTP? If not...
|
||||
int mode = id(operation_mode);
|
||||
|
||||
// BOOST just forces the relay on
|
||||
if (mode == 3) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// OFF → always off
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
// ON → always on
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// TIMER → follow schedule windows
|
||||
{
|
||||
bool should_on = false;
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
|
||||
should_on = true;
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
|
||||
should_on = true;
|
||||
if (should_on) id(relay).turn_on();
|
||||
else id(relay).turn_off();
|
||||
}
|
||||
|
||||
#################################################################################################
|
||||
# INTERVAL COMPONENT
|
||||
# https://esphome.io/components/interval.html
|
||||
#################################################################################################
|
||||
# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
|
||||
interval:
|
||||
- interval: "1min"
|
||||
then:
|
||||
- lambda: |-
|
||||
// — update current_mins via SNTP or fallback
|
||||
if (!id(sntp_time).now().is_valid()) {
|
||||
id(current_mins) += 1;
|
||||
id(current_mins)++;
|
||||
if (id(current_mins) >= 1440) id(current_mins) = 0;
|
||||
} else {
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// operation_mode:
|
||||
// 0 = OFF
|
||||
// 1 = ON
|
||||
// 2 = TIMER
|
||||
// 3 = BOOST
|
||||
int mode = id(operation_mode);
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// BOOST MODE: Relay ON for 'boost_duration'
|
||||
// minutes, then automatically revert to TIMER.
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 3) {
|
||||
id(boost_timer) = id(boost_timer) + 1 ; // works as long as update_interval in seconds
|
||||
// Compare with the substitution boost_duration
|
||||
if (id(boost_timer) < id(boost_duration)) {
|
||||
// Still within the BOOST period => turn relay on
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
// After 'boost_duration' minutes => switch to TIMER
|
||||
// — if in BOOST, advance boost_timer and expire when done
|
||||
if (id(operation_mode) == 3) {
|
||||
id(boost_timer)++;
|
||||
if (id(boost_timer) >= id(boost_duration)) {
|
||||
id(operation_mode) = 2;
|
||||
id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
// Skip the rest of the logic
|
||||
ESP_LOGI("boost_timer", "boost_timer=%d", id(boost_timer));
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// OFF MODE => always off
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// ON MODE => always on
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// TIMER MODE => follow morning/evening schedule
|
||||
// using SNTP if valid, else current_mins
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 2)
|
||||
{
|
||||
|
||||
bool should_on = false;
|
||||
|
||||
// Check morning window
|
||||
// Example: morning_on=360 => 06:00, morning_off=480 => 08:00
|
||||
// If current_mins in [360..480), should_on = true
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Check evening window
|
||||
// Example: evening_on=1260 => 21:00, evening_off=1440 => midnight
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Final relay state based on schedule
|
||||
if (should_on) {
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
id(relay).turn_off();
|
||||
//id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
@@ -84,6 +84,10 @@ substitutions:
|
||||
# PACKAGES
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
@@ -112,10 +116,8 @@ packages:
|
||||
common_athompowermonV3: !include
|
||||
file: common/athompowermonv3_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
@@ -148,13 +150,13 @@ esp32:
|
||||
version: recommended # recommended, latest or dev
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 10min
|
||||
flash_write_interval: 5min
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
@@ -164,7 +166,7 @@ logger:
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# GLOBAL VARIABLES
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
##########################################################################################
|
||||
globals:
|
||||
@@ -184,31 +186,31 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
restore_value: False
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: true
|
||||
restore_value: False
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -244,7 +246,6 @@ globals:
|
||||
restore_value: false
|
||||
initial_value: "0"
|
||||
|
||||
|
||||
##########################################################################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
@@ -355,25 +356,21 @@ text_sensor:
|
||||
} else {
|
||||
id(boost_duration) = static_cast<int>(v);
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Subscribe to operation mode:
|
||||
# OFF, ON, TIMER, BOOST
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
# MQTT subscription: set mode, then immediately re-evaluate relay
|
||||
- platform: mqtt_subscribe
|
||||
name: "Operation Mode Setting"
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation" # BOOST,ON,OFF,TIMER
|
||||
topic: "${mqtt_timer_topic}/operation"
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
/*
|
||||
* In standard C++ (ESPHome), no 'equalsIgnoreCase()'.
|
||||
* We use 'strcasecmp' for case-insensitive compare.
|
||||
* Returns 0 if they match ignoring case.
|
||||
*/
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
@@ -385,11 +382,12 @@ text_sensor:
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "BOOST") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to BOOST");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, BOOST)
|
||||
@@ -506,7 +504,7 @@ binary_sensor:
|
||||
##########################################################################################
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Boost Duration"
|
||||
name: "Timeclock: Boost Duration"
|
||||
id: boost_duration_time
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
@@ -550,6 +548,7 @@ sensor:
|
||||
// never return negative
|
||||
return rem > 0 ? rem : 0;
|
||||
|
||||
|
||||
#################################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
@@ -571,17 +570,14 @@ button:
|
||||
- platform: template
|
||||
name: "Boost now"
|
||||
id: boost_button
|
||||
icon: "mdi:play-circle-outline" # optional, pick any MaterialDesign icon you like
|
||||
icon: "mdi:play-circle-outline"
|
||||
on_press:
|
||||
then:
|
||||
# 1) set the mode to BOOST (3)
|
||||
# 1) reset BOOST timer and set mode
|
||||
- lambda: |-
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(operation_mode) = 3; // Set to BOOST
|
||||
ESP_LOGD("main", "operation_mode set to %d via BOOST button", id(operation_mode));
|
||||
# 2) turn on the relay switch
|
||||
- switch.turn_on:
|
||||
id: relay
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
@@ -591,14 +587,14 @@ select:
|
||||
- platform: template
|
||||
name: "Operation Mode"
|
||||
id: operation_mode_select
|
||||
update_interval: 5s # poll every 5 s for external changes
|
||||
update_interval: 5s
|
||||
options:
|
||||
- "OFF"
|
||||
- "ON"
|
||||
- "TIMER"
|
||||
- "BOOST"
|
||||
|
||||
# Getter: maps your integer into one of the four strings
|
||||
# show the current mode
|
||||
lambda: |-
|
||||
switch (id(operation_mode)) {
|
||||
case 1: return std::string("ON");
|
||||
@@ -607,106 +603,83 @@ select:
|
||||
default: return std::string("OFF");
|
||||
}
|
||||
|
||||
# set_action: called when you pick an option in HA
|
||||
# when changed in HA, set mode & re-evaluate
|
||||
set_action:
|
||||
- lambda: |-
|
||||
if (x == "OFF") id(operation_mode) = 0;
|
||||
else if (x == "ON") id(operation_mode) = 1;
|
||||
else if (x == "TIMER") id(operation_mode) = 2;
|
||||
else {
|
||||
id(boost_timer) = 0; // Reset the BOOST timer to zero
|
||||
id(operation_mode) = 3; /* BOOST */
|
||||
if (x == "OFF") { id(operation_mode) = 0; }
|
||||
else if (x == "ON") { id(operation_mode) = 1; }
|
||||
else if (x == "TIMER") { id(operation_mode) = 2; }
|
||||
else { // BOOST
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
ESP_LOGD("main", "operation_mode set to %d", id(operation_mode));
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
####################################################
|
||||
# Check every minute to decide relay state
|
||||
####################################################
|
||||
interval:
|
||||
- interval: "1min" # Must be 1min as this is used to calculate times
|
||||
#################################################################################################
|
||||
# SCRIPT COMPONENT
|
||||
# https://esphome.io/components/script.html
|
||||
#################################################################################################
|
||||
# Script: evaluate and drive the relay
|
||||
script:
|
||||
- id: evaluate_relay_state
|
||||
then:
|
||||
- lambda: |-
|
||||
// Do we have correct time from SNTP? If not...
|
||||
int mode = id(operation_mode);
|
||||
|
||||
// BOOST just forces the relay on
|
||||
if (mode == 3) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// OFF → always off
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
// ON → always on
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// TIMER → follow schedule windows
|
||||
{
|
||||
bool should_on = false;
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
|
||||
should_on = true;
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
|
||||
should_on = true;
|
||||
if (should_on) id(relay).turn_on();
|
||||
else id(relay).turn_off();
|
||||
}
|
||||
|
||||
#################################################################################################
|
||||
# INTERVAL COMPONENT
|
||||
# https://esphome.io/components/interval.html
|
||||
#################################################################################################
|
||||
# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
|
||||
interval:
|
||||
- interval: "1min"
|
||||
then:
|
||||
- lambda: |-
|
||||
// — update current_mins via SNTP or fallback
|
||||
if (!id(sntp_time).now().is_valid()) {
|
||||
id(current_mins) += 1;
|
||||
id(current_mins)++;
|
||||
if (id(current_mins) >= 1440) id(current_mins) = 0;
|
||||
} else {
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// operation_mode:
|
||||
// 0 = OFF
|
||||
// 1 = ON
|
||||
// 2 = TIMER
|
||||
// 3 = BOOST
|
||||
int mode = id(operation_mode);
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// BOOST MODE: Relay ON for 'boost_duration'
|
||||
// minutes, then automatically revert to TIMER.
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 3) {
|
||||
id(boost_timer) = id(boost_timer) + 1 ; // works as long as update_interval in seconds
|
||||
// Compare with the substitution boost_duration
|
||||
if (id(boost_timer) < id(boost_duration)) {
|
||||
// Still within the BOOST period => turn relay on
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
// After 'boost_duration' minutes => switch to TIMER
|
||||
// — if in BOOST, advance boost_timer and expire when done
|
||||
if (id(operation_mode) == 3) {
|
||||
id(boost_timer)++;
|
||||
if (id(boost_timer) >= id(boost_duration)) {
|
||||
id(operation_mode) = 2;
|
||||
id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
// Skip the rest of the logic
|
||||
ESP_LOGI("boost_timer", "boost_timer=%d", id(boost_timer));
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// OFF MODE => always off
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// ON MODE => always on
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
//////////////////////////////////////////////////
|
||||
// TIMER MODE => follow morning/evening schedule
|
||||
// using SNTP if valid, else current_mins
|
||||
//////////////////////////////////////////////////
|
||||
if (mode == 2)
|
||||
{
|
||||
|
||||
bool should_on = false;
|
||||
|
||||
// Check morning window
|
||||
// Example: morning_on=360 => 06:00, morning_off=480 => 08:00
|
||||
// If current_mins in [360..480), should_on = true
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Check evening window
|
||||
// Example: evening_on=1260 => 21:00, evening_off=1440 => midnight
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off) )
|
||||
{
|
||||
should_on = true;
|
||||
}
|
||||
|
||||
// Final relay state based on schedule
|
||||
if (should_on) {
|
||||
id(relay).turn_on();
|
||||
} else {
|
||||
id(relay).turn_off();
|
||||
//id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
# packages/poollight_operation.yaml
|
||||
# packages/pool_light_boost_switch.yaml
|
||||
|
||||
homeassistant:
|
||||
customize:
|
||||
input_boolean.poollight_mode_switch:
|
||||
icon: mdi:spotlight
|
||||
input_boolean.poollights_mode_switch:
|
||||
icon: mdi:light-flood-up
|
||||
|
||||
input_boolean:
|
||||
poollight_mode_switch:
|
||||
poollights_mode_switch:
|
||||
name: "Pool Light Operation"
|
||||
initial: false
|
||||
|
||||
@@ -15,40 +15,40 @@ input_boolean:
|
||||
initial: false
|
||||
|
||||
automation:
|
||||
- alias: "Pool Light → send BOOST when user turns UI switch ON"
|
||||
- alias: "Pool Lights → send BOOST when user turns UI switch ON"
|
||||
trigger:
|
||||
platform: state
|
||||
entity_id: input_boolean.poollight_mode_switch
|
||||
entity_id: input_boolean.poollights_mode_switch
|
||||
to: "on"
|
||||
condition:
|
||||
condition: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
entity_id: switch.esp_poollightspower_power_output
|
||||
state: "off"
|
||||
action:
|
||||
- service: mqtt.publish
|
||||
data:
|
||||
topic: "viewroad-commands/poollight-timer/operation"
|
||||
topic: "viewroad-commands/poollights-timer/operation"
|
||||
payload: "BOOST"
|
||||
|
||||
- alias: "Pool Light → send OFF & schedule TIMER when user turns UI switch OFF"
|
||||
- alias: "Pool Lights → send OFF & schedule TIMER when user turns UI switch OFF"
|
||||
trigger:
|
||||
platform: state
|
||||
entity_id: input_boolean.poollight_mode_switch
|
||||
entity_id: input_boolean.poollights_mode_switch
|
||||
to: "off"
|
||||
condition:
|
||||
condition: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
entity_id: switch.esp_poollightspower_power_output
|
||||
state: "on"
|
||||
action:
|
||||
- service: mqtt.publish
|
||||
data:
|
||||
topic: "viewroad-commands/poollight-timer/operation"
|
||||
topic: "viewroad-commands/poollights-timer/operation"
|
||||
payload: "OFF"
|
||||
- service: input_boolean.turn_on
|
||||
data:
|
||||
entity_id: input_boolean.timer_light_midnight_pending
|
||||
|
||||
- alias: "Pool Light → send TIMER at midnight"
|
||||
- alias: "Pool Lights → send TIMER at midnight"
|
||||
trigger:
|
||||
platform: time
|
||||
at: "00:00:00"
|
||||
@@ -59,37 +59,37 @@ automation:
|
||||
action:
|
||||
- service: mqtt.publish
|
||||
data:
|
||||
topic: "viewroad-commands/poollight-timer/operation"
|
||||
topic: "viewroad-commands/poollights-timer/operation"
|
||||
payload: "TIMER"
|
||||
- service: input_boolean.turn_off
|
||||
data:
|
||||
entity_id: input_boolean.timer_light_midnight_pending
|
||||
|
||||
- alias: "Pool Light → sync UI switch with real output (no MQTT)"
|
||||
- alias: "Pool Lights → sync UI switch with real output (no MQTT)"
|
||||
trigger:
|
||||
platform: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
entity_id: switch.esp_poollightspower_power_output
|
||||
action:
|
||||
- choose:
|
||||
- conditions:
|
||||
- condition: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
entity_id: switch.esp_poollightspower_power_output
|
||||
state: "on"
|
||||
sequence:
|
||||
- service: input_boolean.turn_on
|
||||
data:
|
||||
entity_id: input_boolean.poollight_mode_switch
|
||||
entity_id: input_boolean.poollights_mode_switch
|
||||
- service: input_boolean.turn_off
|
||||
data:
|
||||
entity_id: input_boolean.timer_light_midnight_pending
|
||||
- conditions:
|
||||
- condition: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
entity_id: switch.esp_poollightspower_power_output
|
||||
state: "off"
|
||||
sequence:
|
||||
- service: input_boolean.turn_off
|
||||
data:
|
||||
entity_id: input_boolean.poollight_mode_switch
|
||||
entity_id: input_boolean.poollights_mode_switch
|
||||
- service: input_boolean.turn_on
|
||||
data:
|
||||
entity_id: input_boolean.timer_light_midnight_pending
|
||||
|
||||
@@ -1,60 +0,0 @@
|
||||
automation:
|
||||
- id: poollight_sync_tasmo_on
|
||||
alias: "Sync TASMO → Pool Light (turn ON)"
|
||||
trigger:
|
||||
- platform: state
|
||||
entity_id: switch.tasmo_ks811t_0707_downstloun_2c
|
||||
to: "on"
|
||||
condition:
|
||||
- condition: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
state: "off"
|
||||
action:
|
||||
- service: switch.turn_on
|
||||
target:
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
|
||||
- id: poollight_sync_tasmo_off
|
||||
alias: "Sync TASMO → Pool Light (turn OFF)"
|
||||
trigger:
|
||||
- platform: state
|
||||
entity_id: switch.tasmo_ks811t_0707_downstloun_2c
|
||||
to: "off"
|
||||
condition:
|
||||
- condition: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
state: "on"
|
||||
action:
|
||||
- service: switch.turn_off
|
||||
target:
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
|
||||
- id: poollight_sync_athplug_on
|
||||
alias: "Sync Pool Light → TASMO (turn ON)"
|
||||
trigger:
|
||||
- platform: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
to: "on"
|
||||
condition:
|
||||
- condition: state
|
||||
entity_id: switch.tasmo_ks811t_0707_downstloun_2c
|
||||
state: "off"
|
||||
action:
|
||||
- service: switch.turn_on
|
||||
target:
|
||||
entity_id: switch.tasmo_ks811t_0707_downstloun_2c
|
||||
|
||||
- id: poollight_sync_athplug_off
|
||||
alias: "Sync Pool Light → TASMO (turn OFF)"
|
||||
trigger:
|
||||
- platform: state
|
||||
entity_id: switch.esp_poollightpower_power_output
|
||||
to: "off"
|
||||
condition:
|
||||
- condition: state
|
||||
entity_id: switch.tasmo_ks811t_0707_downstloun_2c
|
||||
state: "on"
|
||||
action:
|
||||
- service: switch.turn_off
|
||||
target:
|
||||
entity_id: switch.tasmo_ks811t_0707_downstloun_2c
|
||||
Reference in New Issue
Block a user