hallway esphome devices and fixes

2026-04-04 22:36:00 +13:00
parent 4806807e75
commit 51bff34d2e
8 changed files with 506 additions and 66 deletions
@@ -1,25 +1,26 @@
 #:########################################################################################:#
-# TITLE: MAIN HALLWAY LIGHTSWITCH 1 (BK7231N)
+# TITLE: MAIN HALLWAY LIGHTSWITCH
 # zorruno.com layout v1.1 2026
 #:########################################################################################:#
 # REPO:
-# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainhallwaylights1.yaml
+# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainhallwaylights.yaml
 #:########################################################################################:#
 # VERSIONS:
-# V1.1 2026-04-03 Updated yaml to zorruno layout V1.1; corrected KS-811 single naming and operation notes; updated BK7231N single-switch pin mapping
+# V1.2 2026-04-03 Fixed local button logic so physical press toggles relay; moved custom MQTT
+#                 status publish to relay state changes; corrected ESP8266 notes and wording
+# V1.1 2026-04-03 Updated yaml to zorruno layout V1.1; corrected KS-811 single naming and
+#                 operation notes
 # V1.0 2026-04-03 Initial
 #:########################################################################################:#
 # HARDWARE:
 # - Zemismart KS-811 Single push button
-# - BK7231N based switch
-# - BK72XX board: generic-bk7231n-qfn32-tuya
-# - BK7231N single-switch pin mapping checked against KS-811 BK references
 #:########################################################################################:#
 # OPERATION NOTES:
 # - Main hallway switch with 1 output:
 #   1) Main Hallway Lights
-# - A single press of the physical button toggles Relay 1 ON/OFF
-# - Status LED uses P22
+# - A single press of the physical button toggles Relay 1 ON/OFF locally
+# - Relay state is published to the custom MQTT status topic for remote sync
+# - Status LED uses GPIO2
 #:########################################################################################:#
 # MQTT COMMANDS:
 # - None
@@ -42,21 +43,21 @@
 #:########################################################################################:#
 substitutions:
  # Device Naming
-  device_name: "esp-mainhallwaylights1"
+  device_name: "esp-mainhallwaylights"
  friendly_name: "Main Hallway Lightswitch (1)"
-  description_comment: "BK7231N - Main Hallway Lightswitch using a Zemismart KS-811 Single Push Button. Main Hallway Lights (1) (Layout V1.1)"
+  description_comment: "Main Hallway Lightswitch using a Zemismart KS-811 Single Push Button. Main Hallway Lights (1) (Layout V1.1)"
  device_area: "Main Hallway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.

  # Project Naming
-  project_name: "Zemismart Technologies.KS-811 Single BK7231N" # Project Details
+  project_name: "Zemismart Technologies.KS-811 Single" # Project Details
  project_version: "v1.1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version

  # Passwords
  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
-  static_ip_address: !secret esp-mainhallwaylights1_ip
+  static_ip_address: !secret esp-mainhallwaylights_ip
  mqtt_command_main_topic: !secret mqtt_command_main_topic
-  #mqtt_status_main_topic: !secret mqtt_status_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic

  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
  # Don't forget to switch it back when changed.
@@ -66,11 +67,14 @@ substitutions:
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc

-  # Default relay restore mode
-  # Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF
-  relay_restore_mode: "RESTORE_DEFAULT_OFF"
+  # MQTT REMOTE Controls
+  mqtt_this_device_function1: "mainhallway-mainlights"
+  mqtt_this_device_command_topic1: "${mqtt_command_main_topic}/${mqtt_this_device_function1}"
+  mqtt_this_device_status_topic1: "${mqtt_status_main_topic}/${mqtt_this_device_function1}"
+  mqtt_command_on: "On"
+  mqtt_command_off: "Off"

-  # Switch Naming
+  # Switch/Relay/Button Naming & Icons
  switch_1_name: "Main Hallway Lights"

 #:########################################################################################:#
@@ -113,18 +117,7 @@ packages:
  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml

 #:########################################################################################:#
-# PACKAGE ITEM REMOVALS / OVERRIDES:
-#:########################################################################################:#
-wifi:
-  min_auth_mode: !remove # The WPA2 only works on esp32/8266
-  reboot_timeout: 15min  # override the selection from the common package
-  fast_connect: false    # optional; force off in case package vars change
-
-mqtt:
-  keepalive: 15s # overriding the value from the common package
-
-#:########################################################################################:#
-# ESPHOME:
+# ESPHOME
 # https://esphome.io/components/esphome.html
 #:########################################################################################:#
 esphome:
@@ -137,57 +130,111 @@ esphome:
    version: "${project_version}"

 #:########################################################################################:#
-# BUILD FOR BK CHIPSET:
-# bk72xx
-# https://devices.esphome.io/board/bk72xx/
+# ESP PLATFORM AND FRAMEWORK
+# https://esphome.io/components/esp8266.html
 #:########################################################################################:#
-bk72xx:
-  board: generic-bk7231n-qfn32-tuya
+esp8266:
+  board: esp01_1m
+  early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to true.
+  board_flash_mode: dout # Default is dout

 #:########################################################################################:#
-# LOGGER:
+# LOGGING
 # https://esphome.io/components/logger.html
 #:########################################################################################:#
 logger:
-  level: "${log_level}"  # INFO Level suggested, or DEBUG for testing
-  baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
-  id: logger_id
+  level: "${log_level}"
+  #baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64

 #:########################################################################################:#
-# STATUS LED:
+# MQTT: Device-specific MQTT command triggers
+# This adds device-specific MQTT command triggers to the common MQTT configuration.
+#:########################################################################################:#
+mqtt:
+  on_connect:
+    - mqtt.publish:
+        topic: "${mqtt_this_device_status_topic1}"
+        payload: !lambda |-
+          return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
+        retain: true
+
+  on_message:
+    - topic: "${mqtt_this_device_command_topic1}"
+      payload: "${mqtt_command_on}"
+      then:
+        - delay: 50ms
+        - if:
+            condition:
+              lambda: 'return !id(Relay_1).state;'
+            then:
+              - switch.turn_on: Relay_1
+
+    - topic: "${mqtt_this_device_command_topic1}"
+      payload: "${mqtt_command_off}"
+      then:
+        - delay: 50ms
+        - if:
+            condition:
+              lambda: 'return id(Relay_1).state;'
+            then:
+              - switch.turn_off: Relay_1
+
+#:########################################################################################:#
+# STATUS LED
 # https://esphome.io/components/status_led.html
 #:########################################################################################:#
 status_led:
  pin:
-    number: P22 # GPIO22
-    inverted: true
+    number: GPIO02
+    inverted: yes

 #:########################################################################################:#
-# BINARY SENSORS:
+# BINARY SENSORS
 # https://esphome.io/components/binary_sensor/
 #:########################################################################################:#
 binary_sensor:
  - platform: gpio
-    id: button_1
-    internal: true
    pin:
-      number: P24 # GPIO24
-      mode:
-        input: true
-        pullup: true
+      number: GPIO0
+      mode: INPUT
      inverted: true
+    name: "Button 1: ${switch_1_name}"
    filters:
-      - delayed_on: 20ms
+      - delayed_on: 10ms
+      - delayed_off: 10ms
    on_press:
-      - switch.toggle: Relay_1
+      - if:
+          condition:
+            switch.is_on: Relay_1
+          then:
+            - switch.turn_off: Relay_1
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic1}"
+                payload: "${mqtt_command_off}"
+          else:
+            - switch.turn_on: Relay_1
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic1}"
+                payload: "${mqtt_command_on}"

 #:########################################################################################:#
-# SWITCH COMPONENT:
+# SWITCH
 # https://esphome.io/components/switch/
 #:########################################################################################:#
 switch:
  - platform: gpio
    name: "Relay 1: ${switch_1_name}"
-    pin: P16 # GPIO16
+    pin: GPIO12
    id: Relay_1
-    restore_mode: ${relay_restore_mode}
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic1}"
+          payload: "${mqtt_command_on}"
+          retain: true
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic1}"
+          payload: "${mqtt_command_off}"
+          retain: true
@@ -42,7 +42,7 @@
 #:########################################################################################:#
 substitutions:
  # Device Naming
-  device_name: "esp-mainhallwaylights2"
+  device_name: "esp-mainhallwaynightlights"
  friendly_name: "Main Hallway Nightlights (1)"
  description_comment: "BK7231N - Main Hallway Nightlights using a Zemismart KS-811 Single Push Button. Main Hallway Nightlights (1) (Layout V1.1)"
  device_area: "Main Hallway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
@@ -54,9 +54,9 @@ substitutions:
  # Passwords
  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
-  static_ip_address: !secret esp-mainhallwaylights2_ip
+  static_ip_address: !secret esp-mainhallwaynightlights_ip
  mqtt_command_main_topic: !secret mqtt_command_main_topic
-  #mqtt_status_main_topic: !secret mqtt_status_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic

  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
  # Don't forget to switch it back when changed.
@@ -66,11 +66,18 @@ substitutions:
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc

+  # MQTT REMOTE Controls
+  mqtt_this_device_function1: "mainhallway-nightlights"
+  mqtt_this_device_command_topic1: "${mqtt_command_main_topic}/${mqtt_this_device_function1}"
+  mqtt_this_device_status_topic1: "${mqtt_status_main_topic}/${mqtt_this_device_function1}"
+  mqtt_command_on: "On"
+  mqtt_command_off: "Off"
+
  # Default relay restore mode
  # Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF
  relay_restore_mode: "RESTORE_DEFAULT_OFF"

-  # Switch Naming
+  # Switch/Relay/Button Naming & Icons
  switch_1_name: "Main Hallway Nightlights"

 #:########################################################################################:#
@@ -120,8 +127,8 @@ wifi:
  reboot_timeout: 15min  # override the selection from the common package
  fast_connect: false    # optional; force off in case package vars change

-mqtt:
-  keepalive: 15s # overriding the value from the common package
+#mqtt:
+#  keepalive: 15s # overriding the value from the common package

 #:########################################################################################:#
 # ESPHOME:
@@ -153,6 +160,39 @@ logger:
  baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  id: logger_id

+#:########################################################################################:#
+# MQTT: Device-specific MQTT command triggers
+# This adds device-specific MQTT command triggers to the common MQTT configuration.
+#:########################################################################################:#
+mqtt:
+  on_connect:
+    - mqtt.publish:
+        topic: "${mqtt_this_device_status_topic1}"
+        payload: !lambda |-
+          return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
+        retain: true
+
+  on_message:
+    - topic: "${mqtt_this_device_command_topic1}"
+      payload: "${mqtt_command_on}"
+      then:
+        - delay: 50ms
+        - if:
+            condition:
+              lambda: 'return !id(Relay_1).state;'
+            then:
+              - switch.turn_on: Relay_1
+
+    - topic: "${mqtt_this_device_command_topic1}"
+      payload: "${mqtt_command_off}"
+      then:
+        - delay: 50ms
+        - if:
+            condition:
+              lambda: 'return id(Relay_1).state;'
+            then:
+              - switch.turn_off: Relay_1
+
 #:########################################################################################:#
 # STATUS LED:
 # https://esphome.io/components/status_led.html
@@ -171,15 +211,29 @@ binary_sensor:
    id: button_1
    internal: true
    pin:
-      number: P24 # GPIO24
+      number: P24
      mode:
        input: true
        pullup: true
      inverted: true
+    name: "Button 1: ${switch_1_name}"
    filters:
-      - delayed_on: 20ms
+      - delayed_on: 10ms
+      - delayed_off: 10ms
    on_press:
-      - switch.toggle: Relay_1
+      - if:
+          condition:
+            switch.is_on: Relay_1
+          then:
+            - switch.turn_off: Relay_1
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic1}"
+                payload: "${mqtt_command_off}"
+          else:
+            - switch.turn_on: Relay_1
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic1}"
+                payload: "${mqtt_command_on}"

 #:########################################################################################:#
 # SWITCH COMPONENT:
@@ -188,6 +242,16 @@ binary_sensor:
 switch:
  - platform: gpio
    name: "Relay 1: ${switch_1_name}"
-    pin: P16 # GPIO16
+    pin: P16
    id: Relay_1
-    restore_mode: ${relay_restore_mode}
+    restore_mode: ${relay_restore_mode}
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic1}"
+          payload: "${mqtt_command_on}"
+          retain: true
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic1}"
+          payload: "${mqtt_command_off}"
+          retain: true
@@ -0,0 +1,329 @@
+#:########################################################################################:#
+# TITLE: MAIN HALLWAY NORTH LIGHTSWITCH
+# zorruno.com layout v1.1 2026
+#:########################################################################################:#
+# REPO:
+# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainhallwaynorthlightswitch.yaml
+#:########################################################################################:#
+# VERSIONS:
+# V1.1 2026-04-04 Updated yaml to zorruno layout V1.1; checked KS-811 dual ESP8266 GPIO mapping;
+#                  corrected Relay 2 naming; added MQTT state republish on reconnect; added
+#                  GPIO16 polling for Button 1 compatibility; expanded notes/comments
+# V1.0 2026-04-03 Initial
+#:########################################################################################:#
+# HARDWARE:
+# - Zemismart KS-811 Double Push Button
+# - ESP8266 variant
+# - Community-traced dual-button pinout matches:
+#   - Button 1 (top): GPIO16
+#   - Button 2 (bottom): GPIO5
+#   - Relay 1: GPIO13
+#   - Relay 2: GPIO12
+#   - Status LED: GPIO2 (inverted)
+#:########################################################################################:#
+# OPERATION NOTES:
+# - Button 1 toggles Relay 1 locally.
+# - Button 2 toggles Relay 2 locally.
+# - MQTT command topics can also turn each relay On or Off.
+# - Custom MQTT status topics publish the actual relay state after local or MQTT changes.
+# - Current relay states are also republished whenever MQTT reconnects, helping late subscribers.
+# - GPIO16 on ESP8266 does not support normal GPIO interrupts, so Button 1 uses polling mode.
+#:########################################################################################:#
+# MQTT COMMANDS:
+# - ${mqtt_this_device_command_topic1}
+#   Payloads: ${mqtt_command_on}, ${mqtt_command_off}
+# - ${mqtt_this_device_command_topic2}
+#   Payloads: ${mqtt_command_on}, ${mqtt_command_off}
+# - Status topics:
+#   - ${mqtt_this_device_status_topic1}
+#   - ${mqtt_this_device_status_topic2}
+#   Payloads mirror the actual relay state and are published retained.
+#:########################################################################################:#
+# OFFLINE NOTES:
+# a) HA offline (network and MQTT still online)
+#    - Local button control continues.
+#    - MQTT command/status operation continues.
+#
+# b) MQTT offline (or HA and MQTT offline)
+#    - Local button control continues.
+#    - If Home Assistant is online and connected by native ESPHome API, HA control can still work.
+#    - Custom MQTT commands/status are unavailable until MQTT returns.
+#
+# c) Entire WiFi/network offline
+#    - Local wall-switch button control continues for both relays.
+#    - Accurate time is not needed. SNTP is not used for this device.
+#:########################################################################################:#
+
+#:########################################################################################:#
+# SUBSTITUTIONS: Specific device variable substitutions
+# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+#:########################################################################################:#
+substitutions:
+  # Device Naming
+  device_name: "esp-mainhallwaynorthlightswitch"
+  friendly_name: "Main Hallway North Lightswitch (2)"
+  description_comment: "Main Hallway Lightswitch using a Zemismart KS-811 Double Push Button. Main Hallway Lights (1), Night Lights (2) (Layout V1.1)"
+  device_area: "Main Hallway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
+
+  # Project Naming
+  project_name: "Zemismart Technologies.KS-811 Double"
+  project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+
+  # Passwords
+  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
+  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
+  static_ip_address: !secret esp-mainhallwaynorthlightswitch_ip
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic
+
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
+  # Device Settings
+  log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
+  update_interval: "60s" # General sensor update interval
+
+  # MQTT Remote Controls
+  mqtt_this_device_function1: "mainhallway-mainlights"
+  mqtt_this_device_command_topic1: "${mqtt_command_main_topic}/${mqtt_this_device_function1}"
+  mqtt_this_device_status_topic1: "${mqtt_status_main_topic}/${mqtt_this_device_function1}"
+  mqtt_command_on: "On"
+  mqtt_command_off: "Off"
+
+  mqtt_this_device_function2: "mainhallway-nightlights"
+  mqtt_this_device_command_topic2: "${mqtt_command_main_topic}/${mqtt_this_device_function2}"
+  mqtt_this_device_status_topic2: "${mqtt_status_main_topic}/${mqtt_this_device_function2}"
+
+  # Switch/Relay/Button Naming
+  switch_1_name: "Main Hallway Lights"
+  switch_2_name: "Main Hallway Nightlights"
+
+#:########################################################################################:#
+# PACKAGES: Included Common Packages
+# https://esphome.io/components/packages.html
+#:########################################################################################:#
+packages:
+  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
+
+  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
+  common_api: !include
+    file: common/api_common.yaml
+    #file: common/api_common_noencryption.yaml
+    vars:
+      local_api_key: "${api_key}"
+
+  #### MQTT ####
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+
+  #### WEB PORTAL ####
+  #common_webportal: !include common/webportal_common.yaml
+
+  #### SNTP (Only use if you want/need accurate timeclocks) ####
+  #common_sntp: !include common/sntp_common.yaml
+
+  #### DIAGNOSTICS Sensors ####
+  diag_basic: !include common/include_basic_diag_sensors.yaml
+  #diag_more: !include common/include_more_diag_sensors.yaml
+  #diag_debug: !include common/include_debug_diag_sensors.yaml
+  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
+
+#:########################################################################################:#
+# ESPHOME
+# https://esphome.io/components/esphome.html
+#:########################################################################################:#
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}" # Appears on the ESPHome page in HA
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+
+#:########################################################################################:#
+# ESP PLATFORM AND FRAMEWORK
+# https://esphome.io/components/esp8266.html
+#:########################################################################################:#
+esp8266:
+  board: esp01_1m
+  early_pin_init: false # Recommended false where relays/switches are involved
+  board_flash_mode: dout
+
+#:########################################################################################:#
+# LOGGING
+# https://esphome.io/components/logger.html
+#:########################################################################################:#
+logger:
+  level: "${log_level}"
+  #baud_rate: 0 # Set to 0 for no logging via UART if UART is needed elsewhere
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#:########################################################################################:#
+# MQTT: Device-specific MQTT command triggers
+# This extends the common MQTT package with local custom command/status topics.
+#:########################################################################################:#
+mqtt:
+  # Republish current relay states whenever MQTT reconnects so retained status stays accurate
+  # for subscribers that reconnect later.
+  on_connect:
+    - mqtt.publish:
+        topic: "${mqtt_this_device_status_topic1}"
+        payload: !lambda |-
+          return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
+        retain: true
+    - mqtt.publish:
+        topic: "${mqtt_this_device_status_topic2}"
+        payload: !lambda |-
+          return id(Relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
+        retain: true
+
+  on_message:
+    # Mirror remote state onto Relay_1, but only if a real state change is needed.
+    - topic: "${mqtt_this_device_command_topic1}"
+      payload: "${mqtt_command_on}"
+      then:
+        - if:
+            condition:
+              lambda: "return !id(Relay_1).state;"
+            then:
+              - switch.turn_on: Relay_1
+
+    - topic: "${mqtt_this_device_command_topic1}"
+      payload: "${mqtt_command_off}"
+      then:
+        - if:
+            condition:
+              lambda: "return id(Relay_1).state;"
+            then:
+              - switch.turn_off: Relay_1
+
+    # Mirror remote state onto Relay_2, but only if a real state change is needed.
+    - topic: "${mqtt_this_device_command_topic2}"
+      payload: "${mqtt_command_on}"
+      then:
+        - if:
+            condition:
+              lambda: "return !id(Relay_2).state;"
+            then:
+              - switch.turn_on: Relay_2
+
+    - topic: "${mqtt_this_device_command_topic2}"
+      payload: "${mqtt_command_off}"
+      then:
+        - if:
+            condition:
+              lambda: "return id(Relay_2).state;"
+            then:
+              - switch.turn_off: Relay_2
+
+#:########################################################################################:#
+# STATUS LED
+# https://esphome.io/components/status_led.html
+#:########################################################################################:#
+status_led:
+  pin:
+    number: GPIO2
+    inverted: true
+
+#:########################################################################################:#
+# BINARY SENSORS
+# https://esphome.io/components/binary_sensor/
+#:########################################################################################:#
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO16
+      mode:
+        input: true
+      inverted: true
+    name: "Button 1: ${switch_1_name}"
+    use_interrupt: false
+    filters:
+      - delayed_on: 10ms
+      - delayed_off: 10ms
+    on_press:
+      - if:
+          condition:
+            switch.is_on: Relay_1
+          then:
+            - switch.turn_off: Relay_1
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic1}"
+                payload: "${mqtt_command_off}"
+          else:
+            - switch.turn_on: Relay_1
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic1}"
+                payload: "${mqtt_command_on}"
+
+  - platform: gpio
+    pin:
+      number: GPIO5
+      mode:
+        input: true
+      inverted: true
+    name: "Button 2: ${switch_2_name}"
+    filters:
+      - delayed_on: 10ms
+      - delayed_off: 10ms
+    on_press:
+      - if:
+          condition:
+            switch.is_on: Relay_2
+          then:
+            - switch.turn_off: Relay_2
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic2}"
+                payload: "${mqtt_command_off}"
+          else:
+            - switch.turn_on: Relay_2
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic2}"
+                payload: "${mqtt_command_on}"
+
+#:########################################################################################:#
+# SWITCH
+# https://esphome.io/components/switch/
+#:########################################################################################:#
+switch:
+  - platform: gpio
+    name: "Relay 1: ${switch_1_name}"
+    pin: GPIO13
+    id: Relay_1
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic1}"
+          payload: "${mqtt_command_on}"
+          retain: true
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic1}"
+          payload: "${mqtt_command_off}"
+          retain: true
+
+  - platform: gpio
+    name: "Relay 2: ${switch_2_name}"
+    pin: GPIO12
+    id: Relay_2
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic2}"
+          payload: "${mqtt_command_on}"
+          retain: true
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_this_device_status_topic2}"
+          payload: "${mqtt_command_off}"
+          retain: true