hallway esphome devices and fixes
This commit is contained in:
root
@@ -0,0 +1,329 @@
|
||||
#:########################################################################################:#
|
||||
# TITLE: MAIN HALLWAY NORTH LIGHTSWITCH
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainhallwaynorthlightswitch.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V1.1 2026-04-04 Updated yaml to zorruno layout V1.1; checked KS-811 dual ESP8266 GPIO mapping;
|
||||
# corrected Relay 2 naming; added MQTT state republish on reconnect; added
|
||||
# GPIO16 polling for Button 1 compatibility; expanded notes/comments
|
||||
# V1.0 2026-04-03 Initial
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# - Zemismart KS-811 Double Push Button
|
||||
# - ESP8266 variant
|
||||
# - Community-traced dual-button pinout matches:
|
||||
# - Button 1 (top): GPIO16
|
||||
# - Button 2 (bottom): GPIO5
|
||||
# - Relay 1: GPIO13
|
||||
# - Relay 2: GPIO12
|
||||
# - Status LED: GPIO2 (inverted)
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Button 1 toggles Relay 1 locally.
|
||||
# - Button 2 toggles Relay 2 locally.
|
||||
# - MQTT command topics can also turn each relay On or Off.
|
||||
# - Custom MQTT status topics publish the actual relay state after local or MQTT changes.
|
||||
# - Current relay states are also republished whenever MQTT reconnects, helping late subscribers.
|
||||
# - GPIO16 on ESP8266 does not support normal GPIO interrupts, so Button 1 uses polling mode.
|
||||
#:########################################################################################:#
|
||||
# MQTT COMMANDS:
|
||||
# - ${mqtt_this_device_command_topic1}
|
||||
# Payloads: ${mqtt_command_on}, ${mqtt_command_off}
|
||||
# - ${mqtt_this_device_command_topic2}
|
||||
# Payloads: ${mqtt_command_on}, ${mqtt_command_off}
|
||||
# - Status topics:
|
||||
# - ${mqtt_this_device_status_topic1}
|
||||
# - ${mqtt_this_device_status_topic2}
|
||||
# Payloads mirror the actual relay state and are published retained.
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) HA offline (network and MQTT still online)
|
||||
# - Local button control continues.
|
||||
# - MQTT command/status operation continues.
|
||||
#
|
||||
# b) MQTT offline (or HA and MQTT offline)
|
||||
# - Local button control continues.
|
||||
# - If Home Assistant is online and connected by native ESPHome API, HA control can still work.
|
||||
# - Custom MQTT commands/status are unavailable until MQTT returns.
|
||||
#
|
||||
# c) Entire WiFi/network offline
|
||||
# - Local wall-switch button control continues for both relays.
|
||||
# - Accurate time is not needed. SNTP is not used for this device.
|
||||
#:########################################################################################:#
|
||||
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS: Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-mainhallwaynorthlightswitch"
|
||||
friendly_name: "Main Hallway North Lightswitch (2)"
|
||||
description_comment: "Main Hallway Lightswitch using a Zemismart KS-811 Double Push Button. Main Hallway Lights (1), Night Lights (2) (Layout V1.1)"
|
||||
device_area: "Main Hallway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Double"
|
||||
project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-mainhallwaynorthlightswitch_ip
|
||||
mqtt_command_main_topic: !secret mqtt_command_main_topic
|
||||
mqtt_status_main_topic: !secret mqtt_status_main_topic
|
||||
|
||||
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
||||
# Don't forget to switch it back when changed.
|
||||
current_ip_address: ${static_ip_address}
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # General sensor update interval
|
||||
|
||||
# MQTT Remote Controls
|
||||
mqtt_this_device_function1: "mainhallway-mainlights"
|
||||
mqtt_this_device_command_topic1: "${mqtt_command_main_topic}/${mqtt_this_device_function1}"
|
||||
mqtt_this_device_status_topic1: "${mqtt_status_main_topic}/${mqtt_this_device_function1}"
|
||||
mqtt_command_on: "On"
|
||||
mqtt_command_off: "Off"
|
||||
|
||||
mqtt_this_device_function2: "mainhallway-nightlights"
|
||||
mqtt_this_device_command_topic2: "${mqtt_command_main_topic}/${mqtt_this_device_function2}"
|
||||
mqtt_this_device_status_topic2: "${mqtt_status_main_topic}/${mqtt_this_device_function2}"
|
||||
|
||||
# Switch/Relay/Button Naming
|
||||
switch_1_name: "Main Hallway Lights"
|
||||
switch_2_name: "Main Hallway Nightlights"
|
||||
|
||||
#:########################################################################################:#
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
local_current_ip_address: "${current_ip_address}"
|
||||
|
||||
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
#file: common/api_common_noencryption.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
|
||||
#### MQTT ####
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
#diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
#:########################################################################################:#
|
||||
# ESPHOME
|
||||
# https://esphome.io/components/esphome.html
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the ESPHome page in HA
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
#:########################################################################################:#
|
||||
# ESP PLATFORM AND FRAMEWORK
|
||||
# https://esphome.io/components/esp8266.html
|
||||
#:########################################################################################:#
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: false # Recommended false where relays/switches are involved
|
||||
board_flash_mode: dout
|
||||
|
||||
#:########################################################################################:#
|
||||
# LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: "${log_level}"
|
||||
#baud_rate: 0 # Set to 0 for no logging via UART if UART is needed elsewhere
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#:########################################################################################:#
|
||||
# MQTT: Device-specific MQTT command triggers
|
||||
# This extends the common MQTT package with local custom command/status topics.
|
||||
#:########################################################################################:#
|
||||
mqtt:
|
||||
# Republish current relay states whenever MQTT reconnects so retained status stays accurate
|
||||
# for subscribers that reconnect later.
|
||||
on_connect:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_status_topic1}"
|
||||
payload: !lambda |-
|
||||
return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
|
||||
retain: true
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_status_topic2}"
|
||||
payload: !lambda |-
|
||||
return id(Relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
|
||||
retain: true
|
||||
|
||||
on_message:
|
||||
# Mirror remote state onto Relay_1, but only if a real state change is needed.
|
||||
- topic: "${mqtt_this_device_command_topic1}"
|
||||
payload: "${mqtt_command_on}"
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: "return !id(Relay_1).state;"
|
||||
then:
|
||||
- switch.turn_on: Relay_1
|
||||
|
||||
- topic: "${mqtt_this_device_command_topic1}"
|
||||
payload: "${mqtt_command_off}"
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: "return id(Relay_1).state;"
|
||||
then:
|
||||
- switch.turn_off: Relay_1
|
||||
|
||||
# Mirror remote state onto Relay_2, but only if a real state change is needed.
|
||||
- topic: "${mqtt_this_device_command_topic2}"
|
||||
payload: "${mqtt_command_on}"
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: "return !id(Relay_2).state;"
|
||||
then:
|
||||
- switch.turn_on: Relay_2
|
||||
|
||||
- topic: "${mqtt_this_device_command_topic2}"
|
||||
payload: "${mqtt_command_off}"
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: "return id(Relay_2).state;"
|
||||
then:
|
||||
- switch.turn_off: Relay_2
|
||||
|
||||
#:########################################################################################:#
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#:########################################################################################:#
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: true
|
||||
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode:
|
||||
input: true
|
||||
inverted: true
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
use_interrupt: false
|
||||
filters:
|
||||
- delayed_on: 10ms
|
||||
- delayed_off: 10ms
|
||||
on_press:
|
||||
- if:
|
||||
condition:
|
||||
switch.is_on: Relay_1
|
||||
then:
|
||||
- switch.turn_off: Relay_1
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_command_topic1}"
|
||||
payload: "${mqtt_command_off}"
|
||||
else:
|
||||
- switch.turn_on: Relay_1
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_command_topic1}"
|
||||
payload: "${mqtt_command_on}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO5
|
||||
mode:
|
||||
input: true
|
||||
inverted: true
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
filters:
|
||||
- delayed_on: 10ms
|
||||
- delayed_off: 10ms
|
||||
on_press:
|
||||
- if:
|
||||
condition:
|
||||
switch.is_on: Relay_2
|
||||
then:
|
||||
- switch.turn_off: Relay_2
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_command_topic2}"
|
||||
payload: "${mqtt_command_off}"
|
||||
else:
|
||||
- switch.turn_on: Relay_2
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_command_topic2}"
|
||||
payload: "${mqtt_command_on}"
|
||||
|
||||
#:########################################################################################:#
|
||||
# SWITCH
|
||||
# https://esphome.io/components/switch/
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
on_turn_on:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_status_topic1}"
|
||||
payload: "${mqtt_command_on}"
|
||||
retain: true
|
||||
on_turn_off:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_status_topic1}"
|
||||
payload: "${mqtt_command_off}"
|
||||
retain: true
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
on_turn_on:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_status_topic2}"
|
||||
payload: "${mqtt_command_on}"
|
||||
retain: true
|
||||
on_turn_off:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_this_device_status_topic2}"
|
||||
payload: "${mqtt_command_off}"
|
||||
retain: true
|
||||
Reference in New Issue
Block a user