various tidyups and esphome adds

.ha_run.lock

@@ -1 +1 @@
-{"pid": 67, "version": 1, "ha_version": "2026.2.2", "start_ts": 1771127640.2174048}
+{"pid": 68, "version": 1, "ha_version": "2026.2.3", "start_ts": 1771822737.408799}

automations.yaml

@@ -0,0 +1 @@
+[]

configuration.yaml

@@ -1,6 +1,9 @@
 # Configure a default setup of Home Assistant (frontend, api, etc)
 default_config:
 
+# Helpers (default_config no longer loads input_number)
+input_number:
+
 frontend:
   themes: !include_dir_merge_named themes
 
@@ -9,35 +12,25 @@ homeassistant:
   packages: !include_dir_named packages
 
 template: !include_dir_merge_list templates
-#group: !include groups.yaml
 group: !include_dir_merge_named group/
 automation: !include_dir_merge_list automations/
-automation UI: !include automations.yaml
 script: !include_dir_merge_named scripts/
-#script UI: !include scripts.yaml
 scene: !include scenes.yaml
-#mqtt merged: !include_dir_merge_named mqtt/
-#sensor merged: !include_dir_merge_list sensor/
 sensor: !include_dir_merge_list sensor/
 
-# Example base configuration.yaml entry
 conversation:
 
 logger:
   default: info
-#  logs:
-#custom_components.hacs: debug
-#custom_components.evnex: debug
-#evnex: debug
 
 zha:
   enable_quirks: true
   custom_quirks_path: /config/custom_zha_quirks/
-  device_config: # https://community.home-assistant.io/t/turning-a-light-entity-to-switch-entity/589599/7
+  device_config:
     a4:c1:38:02:58:65:86:ed-1: # format: {ieee}-{endpoint_id}
-      type: “switch” # corrected device type
+      type: "switch" # corrected device type
     a4:c1:38:a1:db:1d:38:b7-1: # format: {ieee}-{endpoint_id}
-      type: “switch” # corrected device type
+      type: "switch" # corrected device type
   zigpy_config:
     ota:
       otau_directory: /config/zigpy_ota

esphome/common/network_common.yaml

@@ -51,7 +51,7 @@ wifi:
     subnet: ${static_ip_subnet}
     dns1: ${static_ip_dns1}
     dns2: ${static_ip_dns2}
-  use_address: ${local_static_ip_address}
+  use_address: ${local_current_ip_address} 
   ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
     ssid: ${local_device_name}
     password: ${fallback_ap_password}

esphome/esp-3dprinterpow.yaml

@@ -34,6 +34,10 @@ substitutions:
   mqtt_command_main_topic: !secret mqtt_command_main_topic
   mqtt_status_main_topic: !secret mqtt_status_main_topic
 
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
   # MQTT LOCAL Controls
   mqtt_local_device_name: "3dprinter-power"
   mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_local_device_name}" # Topic we will use to command this locally without HA
@@ -56,6 +60,7 @@ packages:
       local_device_name: "${device_name}"
       local_static_ip_address: "${static_ip_address}"
       local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
 
   #### HOME ASSISTANT API (choose encryption or no encryption options) ####
   common_api: !include

esphome/esp-arcademachine1.yaml

@@ -25,6 +25,10 @@ substitutions:
   ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
   static_ip_address: !secret esp-arcademachine1_ip
 
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
   # Device Settings
   log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
   update_interval: "10s" # update time for for general sensors etc
@@ -49,6 +53,7 @@ packages:
       local_device_name: "${device_name}"
       local_static_ip_address: "${static_ip_address}"
       local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
 
   ##################################################
   # OPTIONAL packages (comment if you don't want them)
@@ -62,8 +67,8 @@ packages:
       local_api_key: "${api_key}"
   
   #### WEB PORTAL ####
-  #common_webportal: !include
+  common_webportal: !include
-  #  file: common/webportal_common.yaml
+    file: common/webportal_common.yaml
 
   #### MQTT ####
   common_mqtt: !include
@@ -124,8 +129,8 @@ esp8266:
 preferences:
   flash_write_interval: 10min
 
-#mdns:
+mdns:
-#  disabled: True # binary size saving
+  disabled: False # binary size saving
 
 ##########################################################################################    
 # ESPHome Logging Enable
@@ -137,33 +142,6 @@ logger:
   #esp8266_store_log_strings_in_flash: false
   #tx_buffer_size: 64
 
-##########################################################################################
-# Global Variables for use in automations etc
-# https://esphome.io/guides/automations.html?highlight=globals#global-variables
-##########################################################################################
-globals:
-
-  # Tracks the time (in seconds from midnight) at the previous boot
-  - id: last_boot_time_s
-    type: int
-    restore_value: true
-    initial_value: "0"
-
-  # Counts how many consecutive boots have occurred (within X seconds)
-  - id: boot_count
-    type: int
-    restore_value: true
-    initial_value: "0"
-
-  ####################################################
-  # boost_timer: counts minutes in BOOST mode
-  # After 'boost_duration' minutes, revert to TIMER.
-  ####################################################
-  - id: boost_timer
-    type: int
-    restore_value: true
-    initial_value: "0"
-
 ##########################################################################################
 # BINARY SENSORS
 # https://esphome.io/components/binary_sensor/

esphome/esp-athomv1temp1 copy.yaml.old

@@ -1,992 +0,0 @@
-##########################################################################################
-##########################################################################################
-#
-##########################################################################################
-##########################################################################################
-
-
-##########################################################################################
-# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
-# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
-##########################################################################################
-substitutions:
-  # Device Naming
-  device_name: "esp-athomv1temp1"
-  friendly_name: "esp-athomv1temp1"
-  description_comment: "esp-athomv1temp1 :: Athom Smart Plug Power V1"
-  device_area: "Outside" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
-  
-  # Project Naming
-  project_name: "Athom Technology.Smart Plug V1" # Project Details 
-  project_version: "v1.0"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
-
-  # Passwords
-  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
-  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
-  static_ip_address: !secret esp-athomv1temp1_ip
-
-  # Device Settings
-  log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
-  update_interval: "10s" # update time for for general sensors etc
-
-  # Device Settings
-  relay_icon: "mdi:power-socket-au"  
-  current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
-  mqtt_timer_topic: "viewroad-commands/esp-athomv1temp1" # Topics you will use to change stuff
-  boost_duration_default: "180"   # Minutes to stay ON in BOOST mode before reverting to TIMER
-  morning_on_default: "450"       # Default in minutes from midnight. Default 07:30 => 450
-  morning_off_default: "450"      # Default in minutes from midnight. Default 07:30 => 450 (same as ON as no need for morning schedule)
-  evening_on_default: "1140"      # Default in minutes from midnight. Default 19:00 => 1140
-  evening_off_default: "1350"     # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
-  
-  ##############################################################################
-  # POOL LIGHT MODE CONTROL (new)
-  ##############################################################################
-  max_modes: "16"              # total number of modes in the cycle
-  mode_pulse_off: "400ms"      # short OFF between quick pulses
-  mode_pulse_on: "400ms"       # short ON after each quick pulse
-  mode_reset_off: "3s"         # long OFF to force hardware reset to mode 1
-  mode_reset_window_ms: "3000" # treat OFF>=this ms as a reset-to-1 when turning back ON
-  mode_prime_on: "800ms"       # if relay is OFF when a color is selected, turn ON for this long before pulsing
-  # Ignored modes bitmask: bit (mode_index-1). For 4 and 5 ignored -> (1<<3)|(1<<4) = 24.
-  ignored_modes_mask: "8288"   # Ignore 6(32), 7(64), 14(8192) :: 32 + 64 + 8192 = 8288
-
-##########################################################################################
-# PACKAGES: Included Common Packages
-# https://esphome.io/components/packages.html
-##########################################################################################
-packages:
-  ##################################################
-  # MANDATORY packages (won't compile without them!)
-  ##################################################
-
-  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
-  common_wifi: !include
-    file: common/network_common.yaml
-    vars:
-      local_device_name: "${device_name}"
-      local_static_ip_address: "${static_ip_address}"
-      local_ota_pass: "${ota_pass}"
-
-  ##################################################
-  # OPTIONAL packages (comment if you don't want them)
-  ##################################################   
-
-  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
-  common_api: !include
-    file: common/api_common.yaml
-    #file: common/api_common_noencryption.yaml
-    vars:
-      local_api_key: "${api_key}"
-  
-  #### WEB PORTAL ####
-  #common_webportal: !include
-  #  file: common/webportal_common.yaml
-
-  #### MQTT ####
-  common_mqtt: !include
-    file: common/mqtt_common.yaml
-    vars:
-      local_device_name: "${device_name}"
-  
-  #### SNTP (Only use if you want/need accurate timeclocks) ####
-  common_sntp: !include
-    file: common/sntp_common.yaml
-
-  #### DIAGNOSTICS Lite Sensors ####
-  common_lite_sensors: !include
-    file: common/sensors_common_lite.yaml
-
-  #### DIAGNOSTICS General Sensors ####
-  common_general_sensors: !include
-    file: common/sensors_common.yaml
-
-  #### DEBUGGING Sensors ####
-  # A count of various resets
-  #common_resetcount_debugging: !include
-  #  file: common/resetcount_common.yaml
-
-  # Device Specific included packages
-  common_athompowermonV1: !include
-    file: common/athompowermonv1_common.yaml
-    vars:
-      local_friendly_name: "${friendly_name}"
-      local_current_limit: "${current_limit}"
-
-##########################################################################################
-# ESPHome
-# https://esphome.io/components/esphome.html
-##########################################################################################
-esphome:
-  name: "${device_name}"
-  friendly_name: "${friendly_name}"
-  comment: "${description_comment}" #Appears on the esphome page in HA
-  area: "${device_area}"  
-  name_add_mac_suffix: False
-  min_version: 2024.6.0
-  project:
-    name: "${project_name}"
-    version: "${project_version}"
-  #platformio_options:
-  #  build_unflags:
-  #    - -std=gnu++20
-  #    - -std=gnu++2a
-  #  build_flags:
-  #    - -std=gnu++11
-  #    - -Os
-  #    - -Wl,--gc-sections
-  #    - -fno-exceptions
-  #    - -fno-rtti
-
-##########################################################################################
-# ESP Platform and Framework
-# https://esphome.io/components/esp32.html
-##########################################################################################
-esp8266:
-  board: esp8285
-  restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
-  #framework:
-  #  version: 2.7.4
-
-preferences:
-  flash_write_interval: 10min
-
-mdns:
-  disabled: True # binary size saving
-
-##########################################################################################    
-# ESPHome Logging Enable
-# https://esphome.io/components/logger.html
-########################################################################################## 
-logger:
-  level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
-  baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
-  #esp8266_store_log_strings_in_flash: false
-  #tx_buffer_size: 64
-
-##########################################################################################
-# Global Variables for use in automations etc
-# https://esphome.io/guides/automations.html?highlight=globals#global-variables
-##########################################################################################
-globals:
-
-  # Tracks the time (in seconds from midnight) at the previous boot
-  - id: last_boot_time_s
-    type: int
-    restore_value: true
-    initial_value: "0"
-
-  # Counts how many consecutive boots have occurred (within X seconds)
-  - id: boot_count
-    type: int
-    restore_value: true
-    initial_value: "0"
-
-  # Morning On time (minutes from midnight),
-  - id: morning_on
-    type: int
-    restore_value: true
-    initial_value: "${morning_on_default}"
-
-  # Morning Off time (minutes from midnight),
-  - id: morning_off
-    type: int
-    restore_value: true
-    initial_value: "${morning_off_default}"
-
-  # Evening On time (minutes from midnight),
-  - id: evening_on
-    type: int
-    restore_value: true
-    initial_value: "${evening_on_default}"
-
-  # Evening Off time (minutes from midnight),
-  - id: evening_off
-    type: int
-    restore_value: true
-    initial_value: "${evening_off_default}"
-
-  # Boost Duration (minutes),
-  - id: boost_duration
-    type: int
-    restore_value: true
-    initial_value: "${boost_duration_default}"
-
-  ####################################################
-  # operation_mode:
-  #  0 = OFF
-  #  1 = ON
-  #  2 = TIMER
-  #  3 = BOOST
-  ####################################################
-  - id: operation_mode
-    type: int
-    restore_value: true
-    initial_value: "2"
-
-  ####################################################
-  # current_mins is set if SNTP is invalid.
-  # We assume user powers on the device at 12:00 noon
-  # => 12 * 60 = 720 minutes from midnight.
-  ####################################################
-  - id: current_mins
-    type: int
-    restore_value: true
-    initial_value: "720" # 720 is 12:00 Noon
-
-  ####################################################
-  # boost_timer: counts minutes in BOOST mode
-  # After 'boost_duration' minutes, revert to TIMER.
-  ####################################################
-  - id: boost_timer
-    type: int
-    restore_value: true
-    initial_value: "0"
-
-  ##############################################################################
-  # POOL LIGHT MODE CONTROL GLOBALS (new)
-  ##############################################################################
-  # Current assumed pool-light mode (0..max_modes). 0 means relay OFF.
-  - id: current_mode
-    type: int
-    restore_value: false
-    initial_value: "1"
-
-  # Total modes in the cycle (edit in substitutions).
-  - id: max_modes
-    type: int
-    restore_value: false
-    initial_value: "${max_modes}"
-
-  # Flag while we are actively pulsing to change modes (prevents scheduler interference).
-  - id: mode_changing
-    type: bool
-    restore_value: false
-    initial_value: "false"
-
-  # Timestamp of last relay off (for delta measurement).
-  - id: last_off_ms
-    type: uint32_t
-    restore_value: false
-    initial_value: "0"
-
-  # Millisecond threshold that separates "quick pulse" vs "reset to mode 1".
-  - id: reset_window_ms
-    type: int
-    restore_value: false
-    initial_value: "${mode_reset_window_ms}"
-
-  # Desired target mode for the cycle script.
-  - id: desired_mode
-    type: int
-    restore_value: false
-    initial_value: "1"
-
-  # Bitmask of ignored modes (1..max_modes). Example: ignore 4 & 5 -> 24.
-  - id: ignored_mask
-    type: int
-    restore_value: false
-    initial_value: "${ignored_modes_mask}"
-
-  # Internal: whether a recheck is already scheduled for min OFF enforcement.
-  - id: recheck_pending
-    type: bool
-    restore_value: false
-    initial_value: "false"
-
-##########################################################################################
-# Text Sensors
-# https://esphome.io/components/text_sensor/index.html
-##########################################################################################
-text_sensor:
-
-############################
-# MQTT Subscriptions
-############################
-  ####################################################
-  # Subscribe to the Morning On time, format "HH:MM"
-  ####################################################
-  - platform: mqtt_subscribe
-    name: "Morning On Time Setting"
-    id: morning_on_topic
-    topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
-    internal: True
-    on_value:
-      then:
-        - lambda: |-
-            // Expect "HH:MM" => total length = 5, with ':'
-            if (x.size() == 5 && x[2] == ':') {
-              int hour   = atoi(x.substr(0, 2).c_str());    // "HH"
-              int minute = atoi(x.substr(3, 2).c_str());    // "MM"
-              id(morning_on) = hour * 60 + minute;
-              ESP_LOGI("timer","Received new Morning On: %02d:%02d", hour, minute);
-            } else {
-              ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
-            }
-  ####################################################
-  # Morning Off time => "HH:MM"
-  ####################################################
-  - platform: mqtt_subscribe
-    name: "Morning Off Time Setting"
-    id: morning_off_topic
-    topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
-    internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
-    on_value:
-      then:
-        - lambda: |-
-            if (x.size() == 5 && x[2] == ':') {
-              int hour   = atoi(x.substr(0, 2).c_str());
-              int minute = atoi(x.substr(3, 2).c_str());
-              id(morning_off) = hour * 60 + minute;
-              ESP_LOGI("timer","Received new Morning Off: %02d:%02d", hour, minute);
-            } else {
-              ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
-            }
-  ####################################################
-  # Evening On time => "HH:MM"
-  ####################################################
-  - platform: mqtt_subscribe
-    name: "Evening On Time Setting"
-    id: evening_on_topic
-    topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
-    internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
-    on_value:
-      then:
-        - lambda: |-
-            if (x.size() == 5 && x[2] == ':') {
-              int hour   = atoi(x.substr(0, 2).c_str());
-              int minute = atoi(x.substr(3, 2).c_str());
-              id(evening_on) = hour * 60 + minute;
-              ESP_LOGI("timer","Received new Evening On: %02d:%02d", hour, minute);
-            } else {
-              ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
-            }
-  ####################################################
-  # Evening Off time => "HH:MM"
-  ####################################################
-  - platform: mqtt_subscribe
-    name: "Evening Off Time Setting"
-    id: evening_off_topic
-    topic: "${mqtt_timer_topic}/evening-off"  # Stored in the format HH:MM
-    internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
-    on_value:
-      then:
-        - lambda: |-
-            if (x.size() == 5 && x[2] == ':') {
-              int hour   = atoi(x.substr(0, 2).c_str());
-              int minute = atoi(x.substr(3, 2).c_str());
-              id(evening_off) = hour * 60 + minute;
-              ESP_LOGI("timer","Received new Evening Off: %02d:%02d", hour, minute);
-            } else {
-              ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
-            }
-  ####################################################
-  # Boost duration => 1 - 1439
-  ####################################################
-  - platform: mqtt_subscribe
-    name: "Boost Duration"
-    id: boost_time_topic
-    topic: "${mqtt_timer_topic}/boost-time" # Stored as an integer from 1-1439
-    internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
-    on_value:
-      then:
-        - lambda: |-
-            // parse as integer
-            char *endptr;
-            long v = strtol(x.c_str(), &endptr, 10);
-
-            // invalid if nothing parsed, trailing chars, or out of 0–1439
-            if (endptr == x.c_str() || *endptr != '\0' || v < 0 || v > 1439) {
-              ESP_LOGE("boost_time", "Invalid boost_time '%s'", x.c_str());
-            } else {
-              id(boost_duration) = static_cast<int>(v);
-            }
-
-  ####################################################
-  # Subscribe to operation mode:
-  # OFF, ON, TIMER, BOOST
-  ####################################################
-  # MQTT subscription: set mode, then immediately re-evaluate relay
-  - platform: mqtt_subscribe
-    id: timer_operation_mode_topic
-    topic: "${mqtt_timer_topic}/operation"
-    internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
-    on_value:
-      then:
-        - lambda: |-
-            if (strcasecmp(x.c_str(), "TIMER") == 0) {
-              id(operation_mode) = 2;
-              ESP_LOGI("timer","Operation mode set to TIMER");
-            } else if (strcasecmp(x.c_str(), "ON") == 0) {
-              id(operation_mode) = 1;
-              ESP_LOGI("timer","Operation mode set to ON");
-            } else if (strcasecmp(x.c_str(), "OFF") == 0) {
-              id(operation_mode) = 0;
-              ESP_LOGI("timer","Operation mode set to OFF");
-            } else if (strcasecmp(x.c_str(), "BOOST") == 0) {
-              id(operation_mode) = 3;
-              id(boost_timer) = 0;
-              ESP_LOGI("timer","Operation mode set to BOOST");
-            } else {
-              ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
-            }
-        - script.execute: evaluate_relay_state
-
-  ######################################################
-  # Expose the current operation mode (OFF, ON, TIMER, BOOST)
-  ######################################################
-  - platform: template
-    name: "Operation Mode State"
-    lambda: |-
-      // 0=OFF, 1=ON, 2=TIMER, 3=BOOST
-      switch (id(operation_mode)) {
-        case 0: return {"OFF"};
-        case 1: return {"ON"};
-        case 2: return {"TIMER"};
-        case 3: return {"BOOST"};
-        default: return {"UNKNOWN"};
-      }
-    update_interval: 5s
-
-  ######################################################
-  # Expose the "Morning On" time as a text (HH:MM)
-  ######################################################
-  - platform: template
-    name: "Timeclock: Morning On Time"
-    lambda: |-
-      int hour = id(morning_on) / 60;
-      int minute = id(morning_on) % 60;
-      // Increase to 16 for safety
-      char buff[16];
-      snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
-      return { std::string(buff) };
-    update_interval: "${update_interval}"
-
-  ######################################################
-  # Expose the "Morning Off" time as a text (HH:MM)
-  ######################################################
-  - platform: template
-    name: "Timeclock: Morning Off Time"
-    lambda: |-
-      int hour = id(morning_off) / 60;
-      int minute = id(morning_off) % 60;
-      // Increase to 16 for safety
-      char buff[16];
-      snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
-      return { std::string(buff) };
-    update_interval: "${update_interval}"
-
-  ######################################################
-  # Expose the "Evening On" time as a text (HH:MM)
-  ######################################################
-  - platform: template
-    name: "Timeclock: Evening On Time"
-    lambda: |-
-      int hour = id(evening_on) / 60;
-      int minute = id(evening_on) % 60;
-      // Increase to 16 for safety
-      char buff[16];
-      snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
-      return { std::string(buff) };
-    update_interval: "${update_interval}"
-
-  ######################################################
-  # Expose the "Evening Off" time as a text (HH:MM)
-  ######################################################
-  - platform: template
-    name: "Timeclock: Evening Off Time"
-    lambda: |-
-      int hour = id(evening_off) / 60;
-      int minute = id(evening_off) % 60;
-      // Increase to 16 for safety
-      char buff[16];
-      snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
-      return { std::string(buff) };
-    update_interval: "${update_interval}"
-
-##########################################################################################
-# BINARY SENSORS
-# https://esphome.io/components/binary_sensor/
-##########################################################################################
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO03
-      mode: INPUT_PULLUP
-      inverted: true
-    name: "Power Button"
-    id: power_button
-    filters:
-      - delayed_on: 20ms
-    on_click:
-      - min_length: 20ms
-        max_length: 500ms
-        then:
-          - lambda: |-
-              if (id(relay).state) {
-                // Relay is ON: turn it OFF and set mode to 2 (TIMER)
-                id(relay).turn_off();
-                id(operation_mode) = 2;
-              } else {
-                // Relay is OFF: turn it ON and set mode to 3 (BOOST)
-                id(relay).turn_on();
-                id(operation_mode) = 3;
-              }
-  
-  - platform: template
-    name: "Relay Status"
-    lambda: |-
-      return id(relay).state;
-
-##########################################################################################
-# Sensors
-# https://esphome.io/components/text_sensor/index.html
-##########################################################################################
-sensor:
-  - platform: template
-    name: "Timeclock: Boost Duration"
-    id: boost_duration_time
-    unit_of_measurement: "mins"
-    accuracy_decimals: "0"
-    update_interval: "${update_interval}"
-    lambda: |-
-      return id(boost_duration);
-    
-  - platform: template
-    name: "Mins from Midnight"
-    id: mins_from_midnight
-    unit_of_measurement: "mins"
-    accuracy_decimals: "0"
-    update_interval: "${update_interval}"
-    internal: True # No need to show this in Home Assistant
-    lambda: |-
-      return id(current_mins);
-
-  # A value in mins if a timer is running showing how many mins left
-  - platform: template
-    name: "Timer Minutes Remaining"
-    id: timer_minutes_remaining
-    unit_of_measurement: "Mins"
-    update_interval: 5s
-    accuracy_decimals: "0"
-    lambda: |-
-      // always zero if relay is off
-      if (!id(relay).state) {
-        return 0;
-      }
-      int rem = 0;
-      // only calculate for mode 2 (scheduled) or mode 3 (BOOST)
-      if (id(operation_mode) == 2) {
-        int a = id(morning_off) - id(current_mins);
-        int b = id(evening_off) - id(current_mins);
-        // if a is negative, use b; otherwise pick the smaller of a or b
-        rem = (a < 0) ? b : (a < b ? a : b);
-      }
-      else if (id(operation_mode) == 3) {
-        rem = id(boost_duration) - id(boost_timer);
-      }
-      // never return negative
-      return rem > 0 ? rem : 0;
-
-
-#################################################################################################
-# SWITCH COMPONENT
-# https://esphome.io/components/switch/
-#################################################################################################
-switch:
-  - platform: gpio
-    name: "Power Output"
-    pin: GPIO14
-    id: relay
-    restore_mode: RESTORE_DEFAULT_OFF       # Ensures the relay is restored (or off) at boot
-    #internal: true                # Hides the switch from Home Assistant
-    icon: "${relay_icon}" 
-    # POOL LIGHT MODE CONTROL: detect quick vs long off periods and keep current_mode in sync
-    on_turn_off:
-      - lambda: |-
-          id(last_off_ms) = millis();
-          if (!id(mode_changing)) id(current_mode) = 0;  // reflect OFF in select when off normally
-    on_turn_on:
-      - lambda: |-
-          if (id(mode_changing)) {
-            return;
-          }
-          uint32_t delta = millis() - id(last_off_ms);
-          if (delta >= (uint32_t)id(reset_window_ms)) {
-            id(current_mode) = 1;
-          } else {
-            id(current_mode)++;
-            if (id(current_mode) > id(max_modes)) id(current_mode) = 1; // keep internal index sane
-          }
-    
-#################################################################################################
-# BUTTON COMPONENT
-# https://esphome.io/components/button/index.html
-#################################################################################################
-button:
-  - platform: template
-    name: "Boost now"
-    id: boost_button
-    icon: "mdi:play-circle-outline"
-    on_press:
-      # 1) reset BOOST timer and set mode
-      - lambda: |-
-          id(boost_timer) = 0;
-          id(operation_mode) = 3;
-      # 2) immediately re-evaluate relay state
-      - script.execute: evaluate_relay_state
-  - platform: template
-    name: "Default timer settings"
-    id: default_timer_settings_button
-    icon: "mdi:restore"
-    on_press:
-      - lambda: |-
-          // Restore all timing globals to their YAML defaults
-          id(morning_on)    = ${morning_on_default};
-          id(morning_off)   = ${morning_off_default};
-          id(evening_on)    = ${evening_on_default};
-          id(evening_off)   = ${evening_off_default};
-          id(boost_duration)= ${boost_duration_default};
-          // Reset mode to TIMER and clear any running boost
-          id(operation_mode)= 2;
-          id(boost_timer)   = 0;
-          ESP_LOGI("timer","Default timer settings applied");
-      - script.execute: evaluate_relay_state
-
-#################################################################################################
-# SELECT COMPONENT
-# https://esphome.io/components/select/index.html
-#################################################################################################
-select:
-  - platform: template
-    name: "Operation Mode"
-    id: operation_mode_select
-    update_interval: 5s
-    options:
-      - "OFF"
-      - "ON"
-      - "TIMER"
-      - "BOOST"
-
-    # show the current mode
-    lambda: |-
-      switch (id(operation_mode)) {
-        case 1: return std::string("ON");
-        case 2: return std::string("TIMER");
-        case 3: return std::string("BOOST");
-        default: return std::string("OFF");
-      }
-
-    # when changed in HA, set mode & re-evaluate
-    set_action:
-      - lambda: |-
-          if      (x == "OFF")   { id(operation_mode) = 0; }
-          else if (x == "ON")    { id(operation_mode) = 1; }
-          else if (x == "TIMER") { id(operation_mode) = 2; }
-          else {  // BOOST
-            id(boost_timer) = 0;
-            id(operation_mode) = 3;
-          }
-      - script.execute: evaluate_relay_state
-
-  ##############################################################################
-  # POOL LIGHT MODE SELECT (new)
-  # 0=OFF -> immediately turns relay OFF and sets Operation Mode = TIMER.
-  # Selecting a color (>=1) forces Operation Mode = ON.
-  # If target < current, do a long reset to mode 1, then pulse forward.
-  # Ignored modes are hidden here but still counted by pulses.
-  ##############################################################################
-  ##############################################################################
-  # POOL LIGHT MODE SELECT (updated display logic)
-  # 0=OFF -> immediately turns relay OFF and sets Operation Mode = TIMER.
-  # Selecting a color (>=1) forces Operation Mode = ON.
-  # If target < current, do a long reset to mode 1, then pulse forward.
-  # Ignored modes are hidden here but still counted by pulses.
-  ##############################################################################
-  - platform: template
-    name: "Pool Light Mode"
-    id: pool_light_mode_select
-    update_interval: 250ms
-    # Options include all 1..16 (no ignored modes currently) plus 0=OFF
-    options:
-      - "0= OFF"
-      - "1= Dark Blue"
-      - "2= Red"
-      - "3= Green"
-      - "4= Purple"
-      - "5= Aqua"
-      #- "6= Lime"
-      #- "7= Cool White"
-      - "8= Speed Up"
-      - "9= Transformer"
-      - "10= Blurple"
-      - "11= Redlime"
-      - "12= Greenqua"
-      - "13= Bluequa"
-      #- "14= Grelime"
-      - "15= Redurple"
-      - "16= RGB Mad"
-
-    # Show OFF only when not in a color-change sequence.
-    # While changing, reflect the in-flight/current mode (never 0).
-    lambda: |-
-      auto label_for = [](int m) -> std::string {
-        switch (m) {
-          case 0:  return "0= OFF";
-          case 1:  return "1= Dark Blue";
-          case 2:  return "2= Red";
-          case 3:  return "3= Green";
-          case 4:  return "4= Purple";
-          case 5:  return "5= Aqua";
-          case 6:  return "6= Lime";
-          case 7:  return "7= Cool White";
-          case 8:  return "8= Speed Up";
-          case 9:  return "9= Transformer";
-          case 10: return "10= Blurple";
-          case 11: return "11= Redlime";
-          case 12: return "12= Greenqua";
-          case 13: return "13= Bluequa";
-          case 14: return "14= Grelime";
-          case 15: return "15= Redurple";
-          case 16: return "16= RGB Mad";
-          default: return "1= Dark Blue";
-        }
-      };
-      auto is_ignored = [&](int m) -> bool {
-        if (m < 1 || m > id(max_modes)) return true;
-        int bit = 1 << (m - 1);
-        return (id(ignored_mask) & bit) != 0;
-      };
-
-      // While stepping (mode_changing), don't show OFF even if relay is briefly OFF.
-      if (id(mode_changing)) {
-        int cm = id(current_mode);
-        if (cm <= 0) cm = 1;  // during long reset, assume Mode 1 is next
-        // Skip ignored modes for display if ever configured later
-        if (!is_ignored(cm)) return label_for(cm);
-        // find next non-ignored just for display robustness
-        for (int m = cm + 1; m <= id(max_modes); m++) if (!is_ignored(m)) return label_for(m);
-        for (int m = 1; m <= id(max_modes); m++)     if (!is_ignored(m)) return label_for(m);
-        return label_for(1);
-      }
-
-      // Normal (not changing): show OFF if relay is actually OFF, else show current mode
-      if (!id(relay).state) return std::string("0= OFF");
-
-      int cm = id(current_mode);
-      if (cm == 0) return std::string("0= OFF");
-      if (!is_ignored(cm)) return label_for(cm);
-      for (int m = cm + 1; m <= id(max_modes); m++) if (!is_ignored(m)) return label_for(m);
-      for (int m = 1; m <= id(max_modes); m++)     if (!is_ignored(m)) return label_for(m);
-      return label_for(1);
-
-    set_action:
-      # First, set flags based on selection
-      - lambda: |-
-          int target = atoi(x.c_str());
-          if (target < 0) target = 0;
-          if (target > id(max_modes)) target = id(max_modes);
-
-          if (target == 0) {
-            // MODE 0: force everything OFF; UI goes back to TIMER control
-            id(mode_changing) = false;
-            id(recheck_pending) = false;
-            id(operation_mode) = 2;   // TIMER
-            id(current_mode) = 0;     // reflect OFF in dropdown
-          } else {
-            // defensive: ignore choosing an ignored mode (options already hide them)
-            int bit = 1 << (target - 1);
-            if ((id(ignored_mask) & bit) != 0) {
-              ESP_LOGW("mode","Selected target %d is ignored; ignoring request", target);
-              return;
-            }
-            // Color selection: force ON mode and start changer
-            id(operation_mode) = 1;
-            id(desired_mode) = target;
-            id(mode_changing) = true;
-          }
-
-      # If OFF was selected, hard-stop any running scripts and cut power
-      - if:
-          condition:
-            lambda: 'return atoi(x.c_str()) == 0;'
-          then:
-            - script.stop: change_to_desired_mode
-            - script.stop: reset_to_mode1
-            - script.stop: enforce_off_guard
-            - switch.turn_off: relay
-          else:
-            - script.execute: change_to_desired_mode
-
-#################################################################################################
-# SCRIPT COMPONENT
-# https://esphome.io/components/script.html
-#################################################################################################
-script:
-  # Core: evaluate and drive the relay (with enforced min OFF window)
-  - id: evaluate_relay_state
-    then:
-      - lambda: |-
-          if (id(mode_changing)) {
-            // do not fight the pulser
-            return;
-          }
-          // Determine target state
-          bool target_on = false;
-          int mode = id(operation_mode);
-
-          if (mode == 3) {             // BOOST
-            target_on = true;
-          } else if (mode == 0) {      // OFF
-            target_on = false;
-          } else if (mode == 1) {      // ON
-            target_on = true;
-          } else if (mode == 2) {      // TIMER
-            bool should_on = false;
-            if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
-              should_on = true;
-            if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
-              should_on = true;
-            target_on = should_on;
-          }
-
-          // Enforce minimum OFF time when turning ON normally (not during color pulses)
-          if (target_on) {
-            uint32_t delta = millis() - id(last_off_ms);
-            if (delta < (uint32_t) id(reset_window_ms)) {
-              // Still inside OFF window: wait; schedule a recheck if not already
-              if (!id(recheck_pending)) {
-                id(enforce_off_guard).execute();
-              }
-              return;
-            } else {
-              id(relay).turn_on();
-              return;
-            }
-          } else {
-            id(relay).turn_off();
-            return;
-          }
-
-  # Poll until OFF window elapsed, then re-evaluate (does not toggle the relay itself)
-  - id: enforce_off_guard
-    mode: restart
-    then:
-      - lambda: |-
-          id(recheck_pending) = true;
-      - while:
-          condition:
-            lambda: |-
-              if (id(mode_changing)) return false; // abort if color change starts
-              uint32_t delta = millis() - id(last_off_ms);
-              return delta < (uint32_t) id(reset_window_ms);
-          then:
-            - delay: 200ms
-      - lambda: |-
-          id(recheck_pending) = false;
-      - script.execute: evaluate_relay_state
-
-  # Long reset to Mode 1
-  - id: reset_to_mode1
-    mode: restart
-    then:
-      - switch.turn_off: relay
-      - delay: ${mode_reset_off}
-      - switch.turn_on: relay
-      - delay: ${mode_pulse_on}
-      - lambda: |-
-          id(current_mode) = 1;
-
-  # Change to desired_mode, robust from OFF and without wrap on lower targets
-  # Change to desired_mode, robust from OFF and without wrap on lower targets
-  - id: change_to_desired_mode
-    mode: restart
-    then:
-      # If relay is currently OFF, establish a known starting point
-      - if:
-          condition:
-            lambda: 'return !id(relay).state;'
-          then:
-            - lambda: |-
-                uint32_t delta = millis() - id(last_off_ms);
-                // If OFF < reset window, enforce a true reset first for predictable start
-                if (delta < (uint32_t) id(reset_window_ms)) {
-                  id(reset_to_mode1).execute();
-                }
-            - if:
-                condition:
-                  lambda: 'return !id(relay).state;'
-                then:
-                  - switch.turn_on: relay
-                  - delay: ${mode_prime_on}
-            - lambda: |-
-                // If we turned ON after ≥ reset window, hardware is at Mode 1
-                if ((millis() - id(last_off_ms)) >= (uint32_t) id(reset_window_ms)) {
-                  id(current_mode) = 1;
-                }
-
-      # If target is below current, do a long reset to Mode 1, then proceed
-      - if:
-          condition:
-            lambda: |-
-              return id(desired_mode) < id(current_mode);
-          then:
-            - script.execute: reset_to_mode1
-            - script.wait: reset_to_mode1
-
-      # If already exactly at target, ensure ON and finish
-      - if:
-          condition:
-            lambda: 'return id(desired_mode) == id(current_mode);'
-          then:
-            - switch.turn_on: relay
-            - lambda: |-
-                id(mode_changing) = false;
-
-      # Step forward until we reach desired (ignored modes still counted)
-      - while:
-          condition:
-            lambda: |-
-              // Allow immediate cancellation if OFF is selected mid-flight
-              return id(mode_changing) && (id(current_mode) < id(desired_mode));
-          then:
-            - switch.turn_off: relay
-            - delay: ${mode_pulse_off}
-            - switch.turn_on: relay
-            - delay: ${mode_pulse_on}
-            - lambda: |-
-                id(current_mode)++;
-
-      # End: make sure we leave the light ON and clear the guard
-      - switch.turn_on: relay
-      - lambda: |-
-          id(mode_changing) = false;
-
-
-#################################################################################################
-# INTERVAL COMPONENT
-# https://esphome.io/components/interval.html
-#################################################################################################
-# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
-interval:
-  - interval: "1min"
-    then:
-      - lambda: |-
-          // — update current_mins via SNTP or fallback
-          if (!id(sntp_time).now().is_valid()) {
-            id(current_mins)++;
-            if (id(current_mins) >= 1440) id(current_mins) = 0;
-          } else {
-            auto now = id(sntp_time).now();
-            id(current_mins) = now.hour * 60 + now.minute;
-          }
-
-          // — if in BOOST, advance boost_timer and expire when done
-          if (id(operation_mode) == 3) {
-            id(boost_timer)++;
-            if (id(boost_timer) >= id(boost_duration)) {
-              id(operation_mode) = 2;
-              //id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
-            }
-          }
-      - script.execute: evaluate_relay_state

esphome/esp-bed1bedsideathombulb.yaml

@@ -0,0 +1,890 @@
+##########################################################################################
+##########################################################################################
+# MASTER BEDROOM BEDSIDE LAMP BULB
+# File:  esp-bed1bedsideathombulb.yaml
+#
+# v1.1 - 2026-02-21 Correct GPIO mapping + use RGBCT platform (Athom LB01)
+# v1.0 - 2026-02-21 Initial version (merged from preferred dimmer + Athom GPIO map)
+#
+# Hardware: Athom 15W E27 Bulb LB01 (RGB + CT Brightness + CT control)
+#
+# NOTES
+# - This keeps the "preferred control" ramping / min-max / watchdog / restore logic.
+# - All ramping and "Output Set (0-100)" controls FORCE the bulb into Warm White endpoint
+#   (so the dimming behavior mainly drives the CT Brightness channel at 3000K).
+# - You can still control full RGB and CT from HA using the normal light entity.
+# - Max On watchdog turns the whole bulb OFF at the time limit (all channels).
+##########################################################################################
+##########################################################################################
+
+##########################################################################################
+# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
+##########################################################################################
+substitutions:
+  # Device Naming
+  device_name: "esp-bed1bedsideathombulb" # yaml file should be device_name.yaml
+  friendly_name: "Master Bedroom Bedside Lamp Bulb"
+  description_comment: "Master Bedroom Bedside lamp using RGB-CW 15W Bulb"
+  device_area: "Master Bedroom"
+
+  # Project Naming
+  project_name: "Athom 15W E27 Bulb LB01 RGBCT.Athom"
+  project_version: "v1.1"
+
+  # Passwords & Secrets (Unfortunately, you can't use substitutions inside secret names)
+  #api_key: !secret esp-api_key
+  api_key: !secret esp-athombulbflasher_api_key
+  #ota_pass: !secret esp-ota_pass
+  ota_pass: !secret esp-athombulbflasher_ota_pass
+  static_ip_address: !secret esp-bed1bedsideathombulb_ip
+
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  #current_ip_address: 192.168.2.121
+  current_ip_address: ${static_ip_address}
+
+  # MQTT LOCAL Controls (optional local control method)
+  mqtt_local_device_name: "bed1-bedsidelamp"
+  mqtt_local_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_local_status_main_topic: !secret mqtt_status_main_topic
+  mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_local_device_name}"
+  mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_local_device_name}"
+  mqtt_local_device_command_ON: "ON"
+  mqtt_local_device_command_OFF: "OFF"
+
+  # Device Specific Settings
+  log_level:            "NONE"   # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
+  update_interval:      "20s"
+  led_gamma:            "1.2"
+  minimum_led_output:   "1"      # % If at this value or below, we'll switch it completely off
+  maximum_led_output:   "90"     # % Hard cap
+  max_on_default_hours: "24"     # 0 = no automatic turn-off
+  pwm_frequency:        "1000"   # Hz
+
+  # Warm endpoint for this bulb (spec range is 3000K-6000K)
+  bulb_warm_kelvin:     "3000K"
+  bulb_cold_kelvin:     "6000K"
+
+  # RGBCT endpoints must be given as mireds in the rgbct component
+  # 6000K = 166.7 mireds, 3000K = 333.3 mireds
+  bulb_cold_mireds:     "167 mireds"
+  bulb_warm_mireds:     "333 mireds"
+
+  # Athom LB01 GPIO mapping (correct)
+  bulb_red_pin:               GPIO4
+  bulb_green_pin:             GPIO12
+  bulb_blue_pin:              GPIO14
+  bulb_ct_brightness_pin:     GPIO5
+  bulb_ct_pin:                GPIO13
+
+##########################################################################################
+# PACKAGES: Included Common Packages
+##########################################################################################
+packages:
+  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
+
+  #### HOME ASSISTANT API ####
+  common_api: !include
+    #file: common/api_common.yaml
+    file: common/api_common_noencryption.yaml
+    vars:
+      local_api_key: "${api_key}"
+
+  #### MQTT ####
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+
+  #### DIAGNOSTICS Sensors ####
+  diag_basic:       !include common/include_basic_diag_sensors.yaml
+  diag_more:        !include common/include_more_diag_sensors.yaml
+  diag_debug:       !include common/include_debug_diag_sensors.yaml
+
+##########################################################################################
+# ESPHome CORE CONFIGURATION
+##########################################################################################
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}"
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+
+  on_boot:
+    # Run later so everything is initialised before we touch states.
+    priority: 200
+    then:
+      # Keep the HA dropdown in sync with the stored mode
+      - lambda: |-
+          switch (id(restart_mode)) {
+            case 0: id(restart_action).publish_state("Fade up to full"); break;
+            case 1: id(restart_action).publish_state("Restore Brightness"); break;
+            case 2: default: id(restart_action).publish_state("Remain Off"); break;
+          }
+
+      # Mode 0: Fade up to full (obeys fade settings; forces Warm endpoint)
+      - if:
+          condition:
+            lambda: 'return id(restart_mode) == 0;'
+          then:
+            - lambda: 'id(ramp_switch_target_on) = true;'
+            - script.execute: ramp_on_script
+
+      # Mode 1: Restore Brightness (deferred; forces Warm endpoint)
+      - if:
+          condition:
+            lambda: 'return id(restart_mode) == 1;'
+          then:
+            - script.execute: deferred_restore_brightness
+
+      # Mode 2: Remain Off
+      - if:
+          condition:
+            lambda: 'return id(restart_mode) == 2;'
+          then:
+            - script.stop: ramp_on_script
+            - script.stop: ramp_off_script
+            - lambda: 'id(ramp_switch_target_on) = false;'
+            - light.turn_off:
+                id: bulb_light
+                transition_length: 0s
+
+      # Boot complete: allow OFF handlers again
+      - lambda: 'id(booting) = false;'
+
+##########################################################################################
+# ESP PLATFORM AND FRAMEWORK
+##########################################################################################
+esp8266:
+  board: esp8285
+  restore_from_flash: true
+
+mdns:
+  disabled: true
+
+preferences:
+  flash_write_interval: 2min
+
+##########################################################################################
+# GLOBAL VARIABLES
+##########################################################################################
+globals:
+  - id: min_brightness_pct
+    type: int
+    restore_value: true
+    initial_value: "${minimum_led_output}"
+
+  - id: max_brightness_pct
+    type: int
+    restore_value: false
+    initial_value: "${maximum_led_output}"
+
+  - id: max_on_hours
+    type: int
+    restore_value: true
+    initial_value: "${max_on_default_hours}"
+
+  - id: led_gamma_f
+    type: float
+    restore_value: false
+    initial_value: ${led_gamma}
+
+  - id: ramp_up_ms
+    type: int
+    restore_value: true
+    initial_value: "5000"
+
+  - id: ramp_down_ms
+    type: int
+    restore_value: true
+    initial_value: "10000"
+
+  - id: restart_mode
+    type: int
+    restore_value: true
+    initial_value: "0" # 0=Fade full, 1=Restore brightness, 2=Remain off
+
+  - id: ramp_switch_target_on
+    type: bool
+    restore_value: true
+    initial_value: "false"
+
+  - id: suppress_slider_sync
+    type: bool
+    restore_value: false
+    initial_value: "false"
+
+  - id: last_brightness_pct
+    type: float
+    restore_value: true
+    initial_value: "0.0"
+
+  - id: last_set_pos
+    type: int
+    restore_value: false
+    initial_value: "-1"
+
+  - id: last_ramp_ms
+    type: int
+    restore_value: false
+    initial_value: "0"
+
+  - id: restore_target_pct
+    type: float
+    restore_value: false
+    initial_value: "0.0"
+
+  - id: is_ramping
+    type: bool
+    restore_value: false
+    initial_value: "false"
+
+  - id: booting
+    type: bool
+    restore_value: false
+    initial_value: "true"
+
+  - id: ramping_for_off
+    type: bool
+    restore_value: false
+    initial_value: "false"
+
+##########################################################################################
+# LOGGER
+##########################################################################################
+logger:
+  level: "${log_level}"
+  baud_rate: 0
+
+##########################################################################################
+# MQTT COMMANDS (adds device-specific triggers to common MQTT)
+##########################################################################################
+mqtt:
+  on_message:
+    - topic: "${mqtt_local_command_topic}/light/set"
+      payload: "${mqtt_local_device_command_ON}"
+      then:
+        - switch.turn_on: bulb_ramp_switch
+
+    - topic: "${mqtt_local_command_topic}/light/set"
+      payload: "${mqtt_local_device_command_OFF}"
+      then:
+        - switch.turn_off: bulb_ramp_switch
+
+##########################################################################################
+# SWITCH
+##########################################################################################
+switch:
+  - platform: template
+    id: bulb_ramp_switch
+    name: "${friendly_name} Fade Up-Down"
+    icon: mdi:lightbulb-on-outline
+    lambda: |-
+      return id(ramp_switch_target_on);
+    turn_on_action:
+      - lambda: |-
+          id(ramp_switch_target_on) = true;
+      - script.stop: ramp_off_script
+      - script.execute: ramp_on_script
+    turn_off_action:
+      - lambda: |-
+          id(ramp_switch_target_on) = false;
+      - script.stop: ramp_on_script
+      - script.execute: ramp_off_script
+
+##########################################################################################
+# BUTTON
+##########################################################################################
+button:
+  - platform: template
+    id: fade_up_button
+    name: "${friendly_name} Fade Up"
+    icon: mdi:arrow-up-bold
+    on_press:
+      - lambda: |-
+          id(ramp_switch_target_on) = true;
+          id(bulb_ramp_switch).publish_state(true);
+      - script.stop: ramp_off_script
+      - script.execute: ramp_on_script
+
+  - platform: template
+    id: fade_down_button
+    name: "${friendly_name} Fade Down"
+    icon: mdi:arrow-down-bold
+    on_press:
+      - lambda: |-
+          id(ramp_switch_target_on) = false;
+          id(bulb_ramp_switch).publish_state(false);
+      - script.stop: ramp_on_script
+      - script.execute: ramp_off_script
+
+  - platform: template
+    id: fade_stop_button
+    name: "${friendly_name} Fade Stop"
+    icon: mdi:pause
+    on_press:
+      - script.stop: ramp_on_script
+      - script.stop: ramp_off_script
+      - lambda: |-
+          id(ramping_for_off) = false;
+          id(is_ramping) = false;
+
+          const auto &cv = id(bulb_light).current_values;
+          if (cv.is_on()) {
+            auto call = id(bulb_light).make_call();
+            call.set_state(true);
+            call.set_brightness(cv.get_brightness());
+            call.set_transition_length(0);
+            call.perform();
+          }
+
+          if (cv.is_on()) {
+            float pct = cv.get_brightness() * 100.0f;
+            id(last_brightness_pct) = pct;
+          }
+
+##########################################################################################
+# SELECT
+##########################################################################################
+select:
+  - platform: template
+    id: restart_action
+    name: "${friendly_name} Restart Action"
+    icon: mdi:restart
+    optimistic: true
+    options:
+      - "Fade up to full"
+      - "Restore Brightness"
+      - "Remain Off"
+    initial_option: "Restore Brightness"
+    set_action:
+      - lambda: |-
+          if (x == "Fade up to full") {
+            id(restart_mode) = 0;
+          } else if (x == "Restore Brightness") {
+            id(restart_mode) = 1;
+          } else {
+            id(restart_mode) = 2;
+          }
+
+##########################################################################################
+# SENSORS
+##########################################################################################
+sensor:
+  - platform: template
+    id: bulb_output_pct
+    name: "${friendly_name} Output (%)"
+    unit_of_measurement: "%"
+    icon: mdi:percent
+    accuracy_decimals: 0
+    update_interval: 2s
+    lambda: |-
+      const auto &cv = id(bulb_light).current_values;
+      return cv.is_on() ? (float) (int)(cv.get_brightness() * 100.0f + 0.5f) : 0.0f;
+
+    on_value:
+      then:
+        - lambda: |-
+            if (!id(suppress_slider_sync)) {
+              float actual = x;
+              float minp = (float) id(min_brightness_pct);
+              float maxp = (float) id(max_brightness_pct);
+              if (maxp <= minp) maxp = minp + 1.0f;
+
+              float pos = (actual <= 0.0f) ? 0.0f : ((actual - minp) * 100.0f / (maxp - minp));
+              if (pos < 0.0f) pos = 0.0f;
+              if (pos > 100.0f) pos = 100.0f;
+              int pos_i = (int) floorf(pos + 0.5f);
+
+              if (pos_i != id(last_set_pos)) {
+                id(last_set_pos) = pos_i;
+                id(led_output_set_pct).publish_state(pos_i);
+              }
+            }
+
+  - platform: template
+    id: bulb_output_pwm_pct
+    name: "${friendly_name} Output PWM (%)"
+    unit_of_measurement: "%"
+    icon: mdi:square-wave
+    accuracy_decimals: 1
+    update_interval: 2s
+    lambda: |-
+      const auto &cv = id(bulb_light).current_values;
+      if (!cv.is_on()) return 0.0f;
+      const float lin = cv.get_brightness();
+      float pwm = powf(lin, id(led_gamma_f));
+      if (pwm < 0.0f) pwm = 0.0f;
+      if (pwm > 1.0f) pwm = 1.0f;
+      return pwm * 100.0f;
+
+##########################################################################################
+# OUTPUTS: 5 x PWM channels for the Athom RGBCT bulb
+##########################################################################################
+output:
+  - platform: esp8266_pwm
+    id: output_red
+    pin: ${bulb_red_pin}
+    frequency: ${pwm_frequency}
+
+  - platform: esp8266_pwm
+    id: output_green
+    pin: ${bulb_green_pin}
+    frequency: ${pwm_frequency}
+
+  - platform: esp8266_pwm
+    id: output_blue
+    pin: ${bulb_blue_pin}
+    frequency: ${pwm_frequency}
+
+  # White brightness (CT Brightness)
+  - platform: esp8266_pwm
+    id: output_white_brightness
+    pin: ${bulb_ct_brightness_pin}
+    frequency: ${pwm_frequency}
+
+  # Color temperature control (CT), inverted
+  - platform: esp8266_pwm
+    id: output_ct
+    pin: ${bulb_ct_pin}
+    frequency: ${pwm_frequency}
+    inverted: true
+
+##########################################################################################
+# LIGHT: RGBCT (correct for this bulb)
+##########################################################################################
+light:
+  - platform: rgbct
+    id: bulb_light
+    name: "${friendly_name}"
+    icon: mdi:lightbulb
+
+    red: output_red
+    green: output_green
+    blue: output_blue
+    white_brightness: output_white_brightness
+    color_temperature: output_ct
+
+    cold_white_color_temperature: ${bulb_cold_mireds}
+    warm_white_color_temperature: ${bulb_warm_mireds}
+
+    # Safety: do not allow RGB and CT whites simultaneously
+    color_interlock: true
+
+    # Important: keep OFF at boot to avoid instant restore flashes; boot script handles behavior.
+    restore_mode: ALWAYS_OFF
+
+    default_transition_length: 2s
+    gamma_correct: "${led_gamma}"
+
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_local_status_topic}/light/state"
+          payload: "${mqtt_local_device_command_ON}"
+          retain: true
+      - lambda: |-
+          if (!id(ramping_for_off)) {
+            id(ramp_switch_target_on) = true;
+          }
+      - script.stop: max_on_watchdog
+      - if:
+          condition:
+            lambda: 'return id(max_on_hours) > 0;'
+          then:
+            - script.execute: max_on_watchdog
+
+    on_turn_off:
+      - if:
+          condition:
+            lambda: 'return !id(booting);'
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_local_status_topic}/light/state"
+                payload: "${mqtt_local_device_command_OFF}"
+                retain: true
+            - lambda: 'id(ramp_switch_target_on) = false;'
+            - script.stop: max_on_watchdog
+            - lambda: |-
+                id(last_brightness_pct) = 0.0f;
+                id(last_set_pos) = 0;
+                id(led_output_set_pct).publish_state(0);
+
+    # Cap brightness to max_brightness_pct without a visible step
+    on_state:
+      - lambda: |-
+          const float cap = id(max_brightness_pct) / 100.0f;
+          const auto &cv = id(bulb_light).current_values;
+          if (!cv.is_on()) return;
+          const float b = cv.get_brightness();
+          if (b <= cap + 0.001f) return;
+
+          auto call = id(bulb_light).make_call();
+          call.set_state(true);
+          call.set_brightness(cap);
+          call.set_transition_length(0);
+          call.perform();
+
+##########################################################################################
+# NUMBER
+##########################################################################################
+number:
+  - platform: template
+    id: cfg_ramp_up_s
+    name: "${friendly_name} Fade Up Time (s)"
+    entity_category: config
+    unit_of_measurement: s
+    icon: mdi:timer-sand
+    mode: slider
+    min_value: 0
+    max_value: 60
+    step: 1
+    lambda: |-
+      return (float) id(ramp_up_ms) / 1000.0f;
+    set_action:
+      - lambda: |-
+          int secs = (int) floorf(x + 0.5f);
+          if (secs < 0) secs = 0;
+          if (secs > 60) secs = 60;
+          id(ramp_up_ms) = secs * 1000;
+          id(cfg_ramp_up_s).publish_state((float) secs);
+
+  - platform: template
+    id: cfg_ramp_down_s
+    name: "${friendly_name} Fade Down Time (s)"
+    entity_category: config
+    unit_of_measurement: s
+    icon: mdi:timer-sand-complete
+    mode: slider
+    min_value: 0
+    max_value: 60
+    step: 1
+    lambda: |-
+      return (float) id(ramp_down_ms) / 1000.0f;
+    set_action:
+      - lambda: |-
+          int secs = (int) floorf(x + 0.5f);
+          if (secs < 0) secs = 0;
+          if (secs > 60) secs = 60;
+          id(ramp_down_ms) = secs * 1000;
+          id(cfg_ramp_down_s).publish_state((float) secs);
+
+  # This is the preferred everyday dimmer slider (FORCES Warm endpoint)
+  - platform: template
+    id: led_output_set_pct
+    name: "${friendly_name} Output Set (0-100)"
+    icon: mdi:tune
+    mode: slider
+    min_value: 0
+    max_value: 100
+    step: 1
+    lambda: |-
+      const auto &cv = id(bulb_light).current_values;
+      float actual = cv.is_on() ? (cv.get_brightness() * 100.0f) : 0.0f;
+      float minp = (float) id(min_brightness_pct);
+      float maxp = (float) id(max_brightness_pct);
+      if (maxp <= minp) maxp = minp + 1.0f;
+      if (actual <= 0.0f) return 0.0f;
+      float pos = (actual - minp) * 100.0f / (maxp - minp);
+      if (pos < 0.0f) pos = 0.0f;
+      if (pos > 100.0f) pos = 100.0f;
+      return floorf(pos + 0.5f);
+    set_action:
+      - if:
+          condition:
+            lambda: 'return x <= 0.0f;'
+          then:
+            - lambda: 'id(suppress_slider_sync) = true;'
+            - script.stop: ramp_on_script
+            - script.stop: ramp_off_script
+            - light.turn_off:
+                id: bulb_light
+                transition_length: 200ms
+            - lambda: |-
+                id(ramp_switch_target_on) = false;
+                id(led_output_set_pct).publish_state(0);
+                id(last_brightness_pct) = 0.0f;
+                id(last_set_pos) = 0;
+            - delay: 400ms
+            - lambda: 'id(suppress_slider_sync) = false;'
+          else:
+            - lambda: |-
+                id(suppress_slider_sync) = true;
+                float pos = x;
+                if (pos < 1.0f) pos = 1.0f;
+                if (pos > 100.0f) pos = 100.0f;
+                id(led_output_set_pct).publish_state((int) floorf(pos + 0.5f));
+            - script.stop: ramp_off_script
+            - script.stop: ramp_on_script
+            - light.turn_on:
+                id: bulb_light
+                color_temperature: "${bulb_warm_kelvin}"
+                brightness: !lambda |-
+                  float pos = id(led_output_set_pct).state;
+                  float minp = (float) id(min_brightness_pct);
+                  float maxp = (float) id(max_brightness_pct);
+                  if (maxp <= minp) maxp = minp + 1.0f;
+                  float out_pct = minp + (pos * (maxp - minp) / 100.0f);
+                  if (out_pct > maxp) out_pct = maxp;
+                  return out_pct / 100.0f;
+                transition_length: 250ms
+            - lambda: |-
+                id(ramp_switch_target_on) = true;
+                float pos = id(led_output_set_pct).state;
+                float minp = (float) id(min_brightness_pct);
+                float maxp = (float) id(max_brightness_pct);
+                if (maxp <= minp) maxp = minp + 1.0f;
+                float out_pct = minp + (pos * (maxp - minp) / 100.0f);
+                if (out_pct > maxp) out_pct = maxp;
+                id(last_brightness_pct) = out_pct;
+            - delay: 400ms
+            - lambda: 'id(suppress_slider_sync) = false;'
+
+  - platform: template
+    id: cfg_max_on_hours
+    name: "${friendly_name} Max On (h)"
+    entity_category: config
+    unit_of_measurement: h
+    icon: mdi:timer-cog
+    mode: slider
+    min_value: 0
+    max_value: 48
+    step: 1
+    lambda: |-
+      return (float) id(max_on_hours);
+    set_action:
+      - lambda: |-
+          int hrs = (int) x;
+          if (hrs < 0)  hrs = 0;
+          if (hrs > 48) hrs = 48;
+          id(max_on_hours) = hrs;
+          id(cfg_max_on_hours).publish_state((float) hrs);
+      - if:
+          condition:
+            lambda: 'return id(bulb_light).current_values.is_on();'
+          then:
+            - script.stop: max_on_watchdog
+            - if:
+                condition:
+                  lambda: 'return id(max_on_hours) > 0;'
+                then:
+                  - script.execute: max_on_watchdog
+
+##########################################################################################
+# SCRIPTS
+##########################################################################################
+script:
+  - id: ramp_on_script
+    mode: restart
+    then:
+      - lambda: 'id(is_ramping) = true;'
+      - script.stop: ramp_off_script
+
+      - if:
+          condition:
+            lambda: |-
+              const auto &cv = id(bulb_light).current_values;
+              const float floor = id(min_brightness_pct) / 100.0f;
+              return (!cv.is_on()) || (cv.get_brightness() + 0.0005f < floor);
+          then:
+            - light.turn_on:
+                id: bulb_light
+                color_temperature: "${bulb_warm_kelvin}"
+                brightness: !lambda 'return id(min_brightness_pct) / 100.0f;'
+                transition_length: 80ms
+
+      - light.turn_on:
+          id: bulb_light
+          color_temperature: "${bulb_warm_kelvin}"
+          brightness: !lambda 'return id(max_brightness_pct) / 100.0f;'
+          transition_length: !lambda |-
+            const auto &cv = id(bulb_light).current_values;
+            const float floor = id(min_brightness_pct) / 100.0f;
+            const float cap  = id(max_brightness_pct) / 100.0f;
+            if (cap <= floor + 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
+
+            float curr = cv.is_on() ? cv.get_brightness() : 0.0f;
+
+            if (curr + 0.0005f < floor) {
+              id(last_ramp_ms) = id(ramp_up_ms);
+              return (uint32_t) id(last_ramp_ms);
+            }
+            if (curr > cap)   curr = cap;
+            if (curr < floor) curr = floor;
+
+            float frac = (cap - curr) / (cap - floor);
+            if (frac < 0.0f) frac = 0.0f;
+            if (frac > 1.0f) frac = 1.0f;
+
+            id(last_ramp_ms) = (int) (id(ramp_up_ms) * frac);
+            return (uint32_t) id(last_ramp_ms);
+
+      - delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
+      - lambda: |-
+          id(is_ramping) = false;
+          const auto &cv = id(bulb_light).current_values;
+          if (cv.is_on()) {
+            float pct = cv.get_brightness() * 100.0f;
+            id(last_brightness_pct) = pct;
+          }
+
+  - id: ramp_to_target_script
+    mode: restart
+    then:
+      - lambda: 'id(is_ramping) = true;'
+      - script.stop: ramp_off_script
+
+      - if:
+          condition:
+            lambda: |-
+              const auto &cv = id(bulb_light).current_values;
+              const float floor = id(min_brightness_pct) / 100.0f;
+              return (!cv.is_on()) || (cv.get_brightness() + 0.0005f < floor);
+          then:
+            - light.turn_on:
+                id: bulb_light
+                color_temperature: "${bulb_warm_kelvin}"
+                brightness: !lambda 'return id(min_brightness_pct) / 100.0f;'
+                transition_length: 80ms
+
+      - light.turn_on:
+          id: bulb_light
+          color_temperature: "${bulb_warm_kelvin}"
+          brightness: !lambda |-
+            float cap_pct = id(restore_target_pct);
+            float maxp    = (float) id(max_brightness_pct);
+            if (cap_pct > maxp) cap_pct = maxp;
+            return cap_pct / 100.0f;
+          transition_length: !lambda |-
+            const auto &cv = id(bulb_light).current_values;
+            const float floor = id(min_brightness_pct) / 100.0f;
+
+            float cap  = id(restore_target_pct) / 100.0f;
+            const float maxp = id(max_brightness_pct) / 100.0f;
+            if (cap > maxp) cap = maxp;
+
+            if (cap <= floor + 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
+
+            float curr = cv.is_on() ? cv.get_brightness() : 0.0f;
+
+            if (curr + 0.0005f < floor) {
+              id(last_ramp_ms) = id(ramp_up_ms);
+              return (uint32_t) id(last_ramp_ms);
+            }
+
+            if (curr > cap)   curr = cap;
+            if (curr < floor) curr = floor;
+
+            float frac = (cap - curr) / (cap - floor);
+            if (frac < 0.0f) frac = 0.0f;
+            if (frac > 1.0f) frac = 1.0f;
+
+            id(last_ramp_ms) = (int) (id(ramp_up_ms) * frac);
+            return (uint32_t) id(last_ramp_ms);
+
+      - delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
+      - lambda: |-
+          id(is_ramping) = false;
+          const auto &cv = id(bulb_light).current_values;
+          if (cv.is_on()) {
+            float pct = cv.get_brightness() * 100.0f;
+            id(last_brightness_pct) = pct;
+          }
+
+  - id: ramp_off_script
+    mode: restart
+    then:
+      - lambda: |-
+          id(is_ramping) = true;
+          id(ramping_for_off) = true;
+      - script.stop: ramp_on_script
+
+      - light.turn_on:
+          id: bulb_light
+          color_temperature: "${bulb_warm_kelvin}"
+          brightness: !lambda 'return id(min_brightness_pct) / 100.0f;'
+          transition_length: !lambda |-
+            const auto &cv = id(bulb_light).current_values;
+            const float floor = id(min_brightness_pct) / 100.0f;
+            float curr = cv.get_brightness();
+            if (curr < floor) curr = floor;
+
+            const float denom = (1.0f - floor);
+            if (denom <= 0.0005f) { id(last_ramp_ms) = 0; return (uint32_t) 0; }
+
+            float frac = (curr - floor) / denom;
+            if (frac < 0.0f) frac = 0.0f;
+            if (frac > 1.0f) frac = 1.0f;
+
+            id(last_ramp_ms) = (int) (id(ramp_down_ms) * frac);
+            return (uint32_t) id(last_ramp_ms);
+
+      - delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
+      - light.turn_off:
+          id: bulb_light
+          transition_length: 150ms
+      - delay: 150ms
+
+      - lambda: |-
+          id(is_ramping) = false;
+          id(ramping_for_off) = false;
+          id(last_brightness_pct) = 0.0f;
+          id(last_set_pos) = 0;
+          id(led_output_set_pct).publish_state(0);
+
+  - id: max_on_watchdog
+    mode: restart
+    then:
+      - if:
+          condition:
+            lambda: 'return id(max_on_hours) > 0;'
+          then:
+            - delay: !lambda 'return (uint32_t) (id(max_on_hours) * 3600000UL);'
+            - if:
+                condition:
+                  lambda: 'return id(bulb_light).current_values.is_on();'
+                then:
+                  - lambda: |-
+                      id(ramp_switch_target_on) = false;
+                      id(bulb_ramp_switch).publish_state(false);
+                  - script.stop: ramp_on_script
+                  - script.execute: ramp_off_script
+
+  - id: deferred_restore_brightness
+    mode: restart
+    then:
+      - delay: 5s
+      - lambda: |-
+          float target = id(last_brightness_pct);
+
+          float minp = (float) id(min_brightness_pct);
+          float maxp = (float) id(max_brightness_pct);
+          if (target > 0.0f && target < minp) target = minp;
+          if (target > maxp)                  target = maxp;
+
+          id(restore_target_pct) = target;
+
+      - if:
+          condition:
+            lambda: 'return id(restore_target_pct) > 0.5f;'
+          then:
+            - lambda: |-
+                id(ramp_switch_target_on) = true;
+                id(suppress_slider_sync)  = true;
+            - script.stop: ramp_off_script
+            - script.execute: ramp_to_target_script
+            - delay: !lambda 'return (uint32_t) id(last_ramp_ms);'
+            - lambda: 'id(suppress_slider_sync) = false;'
+          else:
+            - lambda: 'id(ramp_switch_target_on) = false;'
+            - light.turn_off:
+                id: bulb_light
+                transition_length: 0s

esphome/esp-datacupboardfans.yaml

@@ -0,0 +1,595 @@
+##########################################################################################
+##########################################################################################
+# DATA CUPBOARD FAN CONTROL
+# Fan control for Data Cupboard
+#
+# Hardware: Yunshan 7-30V 10A Relay Board (HW-622) with ESP8266MOD
+#
+# V1.3 2026-02-20 Remove invalid allow_other_uses on pulse_counter pins (ESPHome 2026.2.x)
+# V1.2 2026-02-20 Use common SNTP package, and publish fan fault/status via interval script
+# V1.1 2026-02-20 Fix template binary_sensor update method for ESPHome 2026.2.x
+# V1.0 2026-02-20 Initial Version
+#
+# NOTES
+# - Fan tach inputs are on GPIO1/GPIO3 (UART pins). Logger UART is disabled (baud_rate: 0).
+# - DHT22 data is on GPIO0 (boot-strap pin). Usually OK, but if you ever get boot issues,
+#   move the DHT22 to a different GPIO if your board allows.
+# - Using common/sntp_common.yaml for time and diagnostic time text sensors.
+##########################################################################################
+##########################################################################################
+
+##########################################################################################
+# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
+##########################################################################################
+substitutions:
+  # Device Naming
+  device_name: "esp-datacupboardfans"
+  friendly_name: "Data Cupboard Fans"
+  description_comment: "Fan control for Data Cupboard"
+  device_area: "Data Cupboard"
+
+  # Project Naming
+  project_name: "Yunshan.HW-622 ESP8266MOD Relay Board"
+  project_version: "v1.3"
+
+  # Passwords
+  api_key: !secret esp-api_key
+  ota_pass: !secret esp-ota_pass
+  static_ip_address: !secret esp-datacupboardfans_ip
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+
+  # MQTT Controls
+  mqtt_device_name: "data-cupboard-fans"
+  mqtt_main_topic: "${mqtt_command_main_topic}/${mqtt_device_name}"
+
+  # Device Settings
+  log_level: "ERROR"
+  update_interval: "60s"
+
+  # Names
+  relay_name: "Data Cupboard Fans Relay"
+  override_name: "Override Fans On"
+  door_name: "Data Cupboard Door Status"
+  temp_name: "Data Cupboard Temperature"
+  hum_name: "Data Cupboard Humidity"
+  fan1_rpm_name: "Data Cupboard Fan1 RPM"
+  fan2_rpm_name: "Data Cupboard Fan2 RPM"
+  fan_status_name: "Data Cupboard Fan Status"
+
+  # Fan tach assumptions (typical PC fan = 2 pulses per revolution)
+  fan_pulses_per_rev: "2"
+
+  # Fault thresholds
+  rpm_min_when_relay_off: "950"
+  rpm_min_when_relay_on: "2300"
+
+  # Default thermostat thresholds
+  default_temp_on: "35"
+  default_temp_off: "28"
+
+##########################################################################################
+# PACKAGES: Included Common Packages
+##########################################################################################
+packages:
+  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+
+  #### HOME ASSISTANT API ####
+  common_api: !include
+    file: common/api_common.yaml
+    vars:
+      local_api_key: "${api_key}"
+
+  #### MQTT ####
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+
+  #### SNTP ####
+  common_sntp: !include
+    file: common/sntp_common.yaml
+
+  #### DIAGNOSTICS Sensors ####
+  diag_basic: !include common/include_basic_diag_sensors.yaml
+  diag_more: !include common/include_more_diag_sensors.yaml
+
+##########################################################################################
+# ESPHome
+##########################################################################################
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}"
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+  on_boot:
+    priority: -100
+    then:
+      - lambda: |-
+          id(boot_ms) = millis();
+          id(relay_last_change_ms) = millis();
+      - delay: 2s
+      - script.execute: apply_fan_control
+      - script.execute: evaluate_fan_fault
+
+##########################################################################################
+# ESP Platform and Framework
+##########################################################################################
+esp8266:
+  board: esp12e
+  restore_from_flash: true
+
+preferences:
+  flash_write_interval: 5min
+
+mdns:
+  disabled: false
+
+##########################################################################################
+# LOGGING
+##########################################################################################
+logger:
+  level: "${log_level}"
+  baud_rate: 0
+
+##########################################################################################
+# GLOBALS
+##########################################################################################
+globals:
+  # Max temperature tracking
+  - id: g_max_temp_today
+    type: float
+    restore_value: yes
+    initial_value: "-1000.0"
+  - id: g_max_temp_yesterday
+    type: float
+    restore_value: yes
+    initial_value: "-1000.0"
+  - id: g_max_temp_month
+    type: float
+    restore_value: yes
+    initial_value: "-1000.0"
+  - id: g_max_temp_last_month
+    type: float
+    restore_value: yes
+    initial_value: "-1000.0"
+  - id: g_max_temp_year
+    type: float
+    restore_value: yes
+    initial_value: "-1000.0"
+
+  # Last seen date parts (for rollover)
+  - id: g_last_day
+    type: int
+    restore_value: yes
+    initial_value: "0"
+  - id: g_last_month
+    type: int
+    restore_value: yes
+    initial_value: "0"
+  - id: g_last_year
+    type: int
+    restore_value: yes
+    initial_value: "0"
+
+  # Fault evaluation grace timing
+  - id: boot_ms
+    type: uint32_t
+    restore_value: no
+    initial_value: "0"
+  - id: relay_last_change_ms
+    type: uint32_t
+    restore_value: no
+    initial_value: "0"
+
+##########################################################################################
+# INTERVAL (periodic evaluations)
+# NOTE: common_sntp also defines its own interval (60s) for its fallback clock.
+##########################################################################################
+interval:
+  - interval: 5s
+    then:
+      - script.execute: evaluate_fan_fault
+
+##########################################################################################
+# SWITCHES (Relay + Override)
+##########################################################################################
+switch:
+  # Relay output (GPIO4) - powers both fans
+  - platform: gpio
+    name: "${relay_name}"
+    id: fan_relay
+    pin: GPIO4
+    restore_mode: RESTORE_DEFAULT_OFF
+    icon: "mdi:fan"
+    on_turn_on:
+      then:
+        - lambda: |-
+            id(relay_last_change_ms) = millis();
+        - script.execute: apply_fan_control
+        - script.execute: evaluate_fan_fault
+    on_turn_off:
+      then:
+        - lambda: |-
+            id(relay_last_change_ms) = millis();
+        - script.execute: apply_fan_control
+        - script.execute: evaluate_fan_fault
+
+  # Override switch (forces fans ON, bypasses thermostat logic)
+  - platform: template
+    name: "${override_name}"
+    id: override_fans_on
+    restore_mode: RESTORE_DEFAULT_OFF
+    optimistic: true
+    icon: "mdi:fan-plus"
+    entity_category: config
+    turn_on_action:
+      - switch.turn_on: fan_relay
+      - script.execute: apply_fan_control
+      - script.execute: evaluate_fan_fault
+    turn_off_action:
+      - script.execute: apply_fan_control
+      - script.execute: evaluate_fan_fault
+
+##########################################################################################
+# NUMBERS (On/Off thresholds with hysteresis)
+##########################################################################################
+number:
+  - platform: template
+    name: "Fans On Temperature"
+    id: temp_on_threshold
+    unit_of_measurement: "degC"
+    min_value: 25
+    max_value: 40
+    step: 0.5
+    mode: slider
+    restore_value: true
+    initial_value: ${default_temp_on}
+    optimistic: true
+    entity_category: config
+    icon: "mdi:thermometer-chevron-up"
+    set_action:
+      - script.execute: apply_fan_control
+
+  - platform: template
+    name: "Fans Off Temperature"
+    id: temp_off_threshold
+    unit_of_measurement: "degC"
+    min_value: 25
+    max_value: 40
+    step: 0.5
+    mode: slider
+    restore_value: true
+    initial_value: ${default_temp_off}
+    optimistic: true
+    entity_category: config
+    icon: "mdi:thermometer-chevron-down"
+    set_action:
+      - script.execute: apply_fan_control
+
+##########################################################################################
+# BINARY SENSORS (Door + Fault)
+##########################################################################################
+binary_sensor:
+  # Door status on GPIO5
+  - platform: gpio
+    name: "${door_name}"
+    id: door_status
+    device_class: door
+    pin:
+      number: GPIO5
+      mode: INPUT_PULLUP
+      inverted: false
+    filters:
+      - delayed_on: 50ms
+      - delayed_off: 50ms
+
+  # Fan fault boolean (published by script)
+  - platform: template
+    name: "Data Cupboard Fan Fault"
+    id: fan_fault
+    device_class: problem
+
+##########################################################################################
+# STATUS LED (GPIO2)
+##########################################################################################
+status_led:
+  pin:
+    number: GPIO2
+    inverted: true
+
+##########################################################################################
+# SENSORS (Temp/Humidity + Fan RPM + Max temp templates)
+##########################################################################################
+sensor:
+  # DHT22 on GPIO0
+  - platform: dht
+    pin: GPIO0
+    model: DHT22
+    update_interval: 30s
+    temperature:
+      name: "${temp_name}"
+      id: cupboard_temp
+      unit_of_measurement: "degC"
+      accuracy_decimals: 1
+      on_value:
+        then:
+          - script.execute: update_temp_maxima
+          - script.execute: apply_fan_control
+    humidity:
+      name: "${hum_name}"
+      id: cupboard_humidity
+      unit_of_measurement: "%"
+      accuracy_decimals: 1
+
+  # Fan1 tach pulses on GPIO1 (UART TX pin)
+  - platform: pulse_counter
+    pin:
+      number: GPIO1
+      mode: INPUT_PULLUP
+      inverted: false
+    id: fan1_rpm
+    name: "${fan1_rpm_name}"
+    unit_of_measurement: "rpm"
+    accuracy_decimals: 0
+    update_interval: 10s
+    count_mode:
+      rising_edge: DISABLE
+      falling_edge: INCREMENT
+    filters:
+      # pulse_counter is pulses/minute; typical PC fan tach = 2 pulses per revolution
+      - lambda: |-
+          return x / (float) ${fan_pulses_per_rev};
+      - clamp:
+          min_value: 0
+          max_value: 20000
+
+  # Fan2 tach pulses on GPIO3 (UART RX pin)
+  - platform: pulse_counter
+    pin:
+      number: GPIO3
+      mode: INPUT_PULLUP
+      inverted: false
+    id: fan2_rpm
+    name: "${fan2_rpm_name}"
+    unit_of_measurement: "rpm"
+    accuracy_decimals: 0
+    update_interval: 10s
+    count_mode:
+      rising_edge: DISABLE
+      falling_edge: INCREMENT
+    filters:
+      - lambda: |-
+          return x / (float) ${fan_pulses_per_rev};
+      - clamp:
+          min_value: 0
+          max_value: 20000
+
+  # Max temperature sensors (derived from cupboard_temp)
+  - platform: template
+    name: "Data Cupboard Max Temp Today"
+    id: max_temp_today
+    unit_of_measurement: "degC"
+    accuracy_decimals: 1
+    update_interval: 60s
+    lambda: |-
+      return id(g_max_temp_today);
+
+  - platform: template
+    name: "Data Cupboard Max Temp Yesterday"
+    id: max_temp_yesterday
+    unit_of_measurement: "degC"
+    accuracy_decimals: 1
+    update_interval: 60s
+    lambda: |-
+      return id(g_max_temp_yesterday);
+
+  - platform: template
+    name: "Data Cupboard Max Temp This Month"
+    id: max_temp_month
+    unit_of_measurement: "degC"
+    accuracy_decimals: 1
+    update_interval: 60s
+    lambda: |-
+      return id(g_max_temp_month);
+
+  - platform: template
+    name: "Data Cupboard Max Temp Last Month"
+    id: max_temp_last_month
+    unit_of_measurement: "degC"
+    accuracy_decimals: 1
+    update_interval: 60s
+    lambda: |-
+      return id(g_max_temp_last_month);
+
+  - platform: template
+    name: "Data Cupboard Max Temp This Year"
+    id: max_temp_year
+    unit_of_measurement: "degC"
+    accuracy_decimals: 1
+    update_interval: 60s
+    lambda: |-
+      return id(g_max_temp_year);
+
+##########################################################################################
+# TEXT SENSOR (Normal/Fault status) - published by script
+# NOTE: common_sntp also defines its own text_sensors (time status etc).
+##########################################################################################
+text_sensor:
+  - platform: template
+    name: "${fan_status_name}"
+    id: fan_status
+    icon: "mdi:fan-alert"
+
+##########################################################################################
+# SCRIPTS
+##########################################################################################
+script:
+  # Apply fan control logic (override + hysteresis thresholds)
+  - id: apply_fan_control
+    mode: queued
+    then:
+      - lambda: |-
+          const float t = id(cupboard_temp).state;
+          if (isnan(t)) {
+            return;
+          }
+
+          float on_t = id(temp_on_threshold).state;
+          float off_t = id(temp_off_threshold).state;
+
+          // Guard against bad settings (keep at least 0.5C hysteresis)
+          if (off_t >= on_t) {
+            off_t = on_t - 0.5f;
+          }
+
+          if (id(override_fans_on).state) {
+            if (!id(fan_relay).state) {
+              id(fan_relay).turn_on();
+            }
+            return;
+          }
+
+          // Hysteresis-based control
+          if (!id(fan_relay).state) {
+            if (t >= on_t) {
+              id(fan_relay).turn_on();
+            }
+          } else {
+            if (t <= off_t) {
+              id(fan_relay).turn_off();
+            }
+          }
+
+  # Evaluate and publish fan fault and status
+  - id: evaluate_fan_fault
+    mode: restart
+    then:
+      - lambda: |-
+          const uint32_t now_ms = millis();
+
+          // Grace window after boot / relay change to allow RPM to stabilize
+          const bool in_grace =
+            (now_ms - id(boot_ms) < 20000) ||
+            (now_ms - id(relay_last_change_ms) < 15000);
+
+          if (in_grace) {
+            id(fan_fault).publish_state(false);
+            id(fan_status).publish_state("Normal");
+            return;
+          }
+
+          const float r1 = id(fan1_rpm).state;
+          const float r2 = id(fan2_rpm).state;
+
+          if (isnan(r1) || isnan(r2)) {
+            id(fan_fault).publish_state(true);
+            id(fan_status).publish_state("Fault");
+            return;
+          }
+
+          const float req = id(fan_relay).state ? ${rpm_min_when_relay_on} : ${rpm_min_when_relay_off};
+
+          // Requirement as requested:
+          // - Relay OFF => both fans must be > 1800 RPM
+          // - Relay ON  => both fans must be > 3000 RPM
+          const bool fault = (r1 < req) || (r2 < req);
+
+          id(fan_fault).publish_state(fault);
+          id(fan_status).publish_state(fault ? "Fault" : "Normal");
+
+  # Update daily/monthly/yearly maxima based on current temperature and current date
+  - id: update_temp_maxima
+    mode: queued
+    then:
+      - lambda: |-
+          const float t = id(cupboard_temp).state;
+          if (isnan(t)) {
+            return;
+          }
+
+          auto now = id(sntp_time).now();
+          if (!now.is_valid()) {
+            // Time not valid yet: still track as rolling maxima
+            if (t > id(g_max_temp_today)) id(g_max_temp_today) = t;
+            if (t > id(g_max_temp_month)) id(g_max_temp_month) = t;
+            if (t > id(g_max_temp_year)) id(g_max_temp_year) = t;
+          } else {
+            // Initialize date tracking on first valid time
+            if (id(g_last_year) == 0) {
+              id(g_last_year) = now.year;
+              id(g_last_month) = now.month;
+              id(g_last_day) = now.day_of_month;
+
+              id(g_max_temp_today) = t;
+              id(g_max_temp_yesterday) = t;
+              id(g_max_temp_month) = t;
+              id(g_max_temp_last_month) = t;
+              id(g_max_temp_year) = t;
+            } else {
+              // Year rollover
+              if (now.year != id(g_last_year)) {
+                id(g_last_year) = now.year;
+                id(g_max_temp_year) = t;
+              }
+
+              // Month rollover
+              if (now.month != id(g_last_month)) {
+                id(g_max_temp_last_month) = id(g_max_temp_month);
+                id(g_max_temp_month) = t;
+                id(g_last_month) = now.month;
+              }
+
+              // Day rollover
+              if (now.day_of_month != id(g_last_day)) {
+                id(g_max_temp_yesterday) = id(g_max_temp_today);
+                id(g_max_temp_today) = t;
+                id(g_last_day) = now.day_of_month;
+              }
+
+              // Update running maxima
+              if (t > id(g_max_temp_today)) id(g_max_temp_today) = t;
+              if (t > id(g_max_temp_month)) id(g_max_temp_month) = t;
+              if (t > id(g_max_temp_year)) id(g_max_temp_year) = t;
+            }
+          }
+
+          // Publish template sensors promptly
+          id(max_temp_today).publish_state(id(g_max_temp_today));
+          id(max_temp_yesterday).publish_state(id(g_max_temp_yesterday));
+          id(max_temp_month).publish_state(id(g_max_temp_month));
+          id(max_temp_last_month).publish_state(id(g_max_temp_last_month));
+          id(max_temp_year).publish_state(id(g_max_temp_year));
+
+##########################################################################################
+# MQTT COMMANDS (device-specific)
+##########################################################################################
+mqtt:
+  on_message:
+    # Relay control
+    - topic: "${mqtt_main_topic}/relay/set"
+      payload: "ON"
+      then:
+        - switch.turn_on: fan_relay
+    - topic: "${mqtt_main_topic}/relay/set"
+      payload: "OFF"
+      then:
+        - switch.turn_off: fan_relay
+
+    # Override control
+    - topic: "${mqtt_main_topic}/override/set"
+      payload: "ON"
+      then:
+        - switch.turn_on: override_fans_on
+    - topic: "${mqtt_main_topic}/override/set"
+      payload: "OFF"
+      then:
+        - switch.turn_off: override_fans_on

esphome/esp-lounge6chdimmer.yaml

@@ -71,6 +71,10 @@ substitutions:
   ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
   static_ip_address: !secret esp-lounge6chdimmer_ip
 
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
   # Device Settings
   #relay_icon: "mdi:lightbulb-group"
   log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
@@ -114,6 +118,7 @@ packages:
       local_device_name: "${device_name}"
       local_static_ip_address: "${static_ip_address}"
       local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
 
   #### HOME ASSISTANT API (choose encryption or no encryption options) ####
   common_api: !include

esphome/esp-mainbathfancombo.yaml

@@ -1,14 +1,22 @@
 ##########################################################################################
 ##########################################################################################
-# MAIN BATHROOM FAN/HEAT COMBO SWITCH 
+# MAIN BATHROOM FAN/HEAT COMBO SWITCH
+# V1.5 2026-02-23 MQTT numeric timer only applies if fan already ON (does not turn fan ON)
+# V1.4 2026-02-23 Add mm:ss countdown text sensor (eg 22:12) + per-second countdown engine
+# V1.3 2026-02-23 Add 60-min cap timer + Remaining Minutes sensor (counts down)
+# V1.2 2026-02-18 Stop delayed-off countdown when Relay_1 turns OFF
 # V1.1 2025-08-26 Minor Changes (MQTT)
 # V1.0 2025-06-01 Initial Version
 ##########################################################################################
-# Zemismart KS-811 Triple push button
+# Zemismart KS-811 Double Push Button
 # pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
 #
 # NOTES
-# - 
+# - MQTT Local Usage
+#   Send ON  to ${mqtt_command_main_topic}/${mqtt_local_device_name} and it will turn the fan ON (60 min cap)
+#   Send OFF to ${mqtt_command_main_topic}/${mqtt_local_device_name} and it will turn the fan OFF
+#   Send a value from 1 to 60 to ${mqtt_command_main_topic}/${mqtt_local_device_name}
+#     and it will ONLY start/restart the countdown IF the fan is already ON (in minutes)
 #
 ##########################################################################################
 ##########################################################################################
@@ -22,26 +30,35 @@ substitutions:
   device_name: "esp-mainbathfancombo"
   friendly_name: "Main Bathroom Fan-Heat Combo Switch (2)"
   description_comment: "Main Bathroom Fan/Heat Switch using a Zemismart KS-811 Double Push Button. Extract Fan (1), IR heater (2)"
-  device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
+  device_area: "Main Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
-  
+
   # Project Naming
-  project_name: "Zemismart Technologies.KS-811-2 (Double)" # Project Details 
+  project_name: "Zemismart Technologies.KS-811-2 (Double)" # Project Details
-  project_version: "v1.1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+  project_version: "v1.5"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
-  
+
-  entity_prefix: "Main Bathroom" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current. 
+  entity_prefix: "Main Bathroom" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
 
   # Passwords
   api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
   ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
   static_ip_address: !secret esp-mainbathfancombo_ip
   mqtt_command_main_topic: !secret mqtt_command_main_topic
-  #mqtt_status_main_topic: !secret mqtt_status_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic
-  
+
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
   # Device Settings
   #relay_icon: "mdi:heating-coil"
   log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
   update_interval: "60s" # update time for for general sensors etc
 
+  # MQTT LOCAL Controls
+  mqtt_local_device1_name: "masterbath-fan"
+  mqtt_local_command1_topic: "${mqtt_command_main_topic}/${mqtt_local_device1_name}" # Topic we will use to command this locally without HA
+  mqtt_local_status1_topic: "${mqtt_status_main_topic}/${mqtt_local_device1_name}" # Topic we will use to view status locally without HA
+
   # MQTT REMOTE Controls
   mqtt_remote_device1_name: "masterbath-towelrail"
   mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}/operation"
@@ -59,6 +76,7 @@ packages:
       local_device_name: "${device_name}"
       local_static_ip_address: "${static_ip_address}"
       local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
 
   #### HOME ASSISTANT API (choose encryption or no encryption options) ####
   common_api: !include
@@ -72,7 +90,7 @@ packages:
     file: common/mqtt_common.yaml
     vars:
       local_device_name: "${device_name}"
-  
+
   #### WEB PORTAL ####
   #common_webportal: !include common/webportal_common.yaml
   #### SNTP (Only use if you want/need accurate timeclocks) ####
@@ -96,26 +114,30 @@ esphome:
   project:
     name: "${project_name}"
     version: "${project_version}"
-  platformio_options:
+  #platformio_options:
-    build_flags:
+  #  build_flags:
-      - "-Os"                   # optimize for size
+  #    - "-Os"               # optimize for size
-      - "-Wl,--gc-sections"     # drop unused code/data
+  #    - "-Wl,--gc-sections" # drop unused code/data
-      #- "-fno-exceptions"       # strip C++ exceptions
+  #    - "-fno-exceptions"   # strip C++ exceptions
-      #- "-fno-rtti"             # strip C++ RTTI
+  #    - "-fno-rtti"         # strip C++ RTTI
   on_boot:
     priority: -100
     then:
+      # Avoid stale relay2_forced_relay1 across boots
       - if:
           condition:
             switch.is_on: Relay_2
           then:
+            - lambda: |-
+                id(relay2_forced_relay1) = !id(Relay_1).state;
             - if:
                 condition:
                   switch.is_off: Relay_1
                 then:
-                  - lambda: |-
-                      id(relay2_forced_relay1) = true;
                   - switch.turn_on: Relay_1
+          else:
+            - lambda: |-
+                id(relay2_forced_relay1) = false;
 
 ##########################################################################################
 # ESP Platform and Framework
@@ -123,16 +145,16 @@ esphome:
 ##########################################################################################
 esp8266:
   board: esp01_1m
-  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
+  early_pin_init: false # Recommended false where switches are involved.
   board_flash_mode: dout # Default is dout
 
-##########################################################################################    
+##########################################################################################
 # ESPHome Logging Enable
 # https://esphome.io/components/logger.html
-########################################################################################## 
+##########################################################################################
 logger:
-  level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
+  level: "${log_level}"  # INFO Level suggested, or DEBUG for testing
-  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
   #esp8266_store_log_strings_in_flash: false
   #tx_buffer_size: 64
 
@@ -141,11 +163,39 @@ logger:
 # https://esphome.io/guides/automations.html?highlight=globals#global-variables
 ##########################################################################################
 globals:
+  # Tracks if Relay_2 forced Relay_1 ON (so we can decide if Relay_1 should turn OFF when Relay_2 turns OFF)
   - id: relay2_forced_relay1
     type: bool
     restore_value: yes
     initial_value: "false"
 
+  # 60-min cap / countdown state for Relay_1 (Fan)
+  - id: relay1_timer_active
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: relay1_autooff_pending
+    type: bool
+    restore_value: no
+    initial_value: "false"
+
+  - id: relay1_remaining_min
+    type: int
+    restore_value: no
+    initial_value: "0"
+
+  # mm:ss countdown tracking
+  - id: relay1_end_ms
+    type: uint32_t
+    restore_value: no
+    initial_value: "0"
+
+  - id: relay1_remaining_sec
+    type: int
+    restore_value: no
+    initial_value: "0"
+
 ##########################################################################################
 # STATUS LED
 # https://esphome.io/components/status_led.html
@@ -157,6 +207,126 @@ status_led:
     number: GPIO2
     inverted: yes
 
+##########################################################################################
+# SENSORS
+##########################################################################################
+sensor:
+  - platform: template
+    name: "${entity_prefix} Fan Remaining Minutes"
+    id: relay1_remaining_minutes
+    unit_of_measurement: "min"
+    accuracy_decimals: 0
+    icon: mdi:timer-outline
+    update_interval: 1s
+    lambda: |-
+      return (float) id(relay1_remaining_min);
+
+text_sensor:
+  - platform: template
+    name: "${entity_prefix} Fan Countdown"
+    id: relay1_countdown_text
+    icon: mdi:timer-outline
+    update_interval: 1s
+    lambda: |-
+      int sec = id(relay1_remaining_sec);
+      if (sec < 0) sec = 0;
+      int m = sec / 60;
+      int s = sec % 60;
+      char buf[12];
+      snprintf(buf, sizeof(buf), "%d:%02d", m, s);
+      return std::string(buf);
+
+##########################################################################################
+# MQTT COMMANDS
+# This adds device-specific MQTT command triggers to the common MQTT configuration.
+##########################################################################################
+mqtt:
+  on_message:
+    # Fan control: ON / OFF / 1..60 minutes (timer only if fan already ON)
+    - topic: "${mqtt_local_command1_topic}"
+      then:
+        - lambda: |-
+            std::string p = x;
+
+            // Trim leading/trailing whitespace
+            while (!p.empty() && (p.back() == '\n' || p.back() == '\r' || p.back() == ' ' || p.back() == '\t')) p.pop_back();
+            size_t s = p.find_first_not_of(" \t\r\n");
+            if (s == std::string::npos) return;
+            p = p.substr(s);
+
+            // Uppercase
+            for (size_t i = 0; i < p.size(); i++) {
+              if (p[i] >= 'a' && p[i] <= 'z') p[i] = (char)(p[i] - 'a' + 'A');
+            }
+
+            if (p == "ON") {
+              // ON always turns fan ON (if needed) and starts/restarts 60 min cap timer
+              id(relay_1_delayed_off).execute(60, true);
+              return;
+            }
+
+            if (p == "OFF") {
+              if (id(Relay_1).state) id(Relay_1).turn_off();
+              return;
+            }
+
+            // Parse 1..60 minutes
+            char *endptr = nullptr;
+            long v = strtol(p.c_str(), &endptr, 10);
+
+            if (endptr != nullptr) {
+              while (*endptr == ' ' || *endptr == '\t' || *endptr == '\r' || *endptr == '\n') endptr++;
+            }
+
+            if (endptr != nullptr && *endptr == '\0' && v >= 1 && v <= 60) {
+              // Minor change: ONLY start/restart countdown if fan already ON (do not turn it ON)
+              if (id(Relay_1).state) {
+                id(relay_1_delayed_off).execute((int) v, false);
+                ESP_LOGI("mqtt", "Relay_1 timer restarted: %ld minute(s).", v);
+              } else {
+                ESP_LOGI("mqtt", "Ignoring timer value %ld because Relay_1 is OFF.", v);
+              }
+            } else {
+              ESP_LOGW("mqtt", "Ignoring payload '%s' on %s", p.c_str(), "${mqtt_local_command1_topic}");
+            }
+
+##########################################################################################
+# SCRIPTS
+##########################################################################################
+script:
+  # Starts/restarts mm:ss countdown, and optionally turns fan ON (used for MQTT ON / auto-start)
+  - id: relay_1_delayed_off
+    mode: restart
+    parameters:
+      off_delay_min: int
+      ensure_on: bool
+    then:
+      - lambda: |-
+          int m = off_delay_min;
+          if (m < 1) m = 1;
+          if (m > 60) m = 60;
+
+          uint32_t dur_ms = (uint32_t) m * 60UL * 1000UL;
+          id(relay1_end_ms) = millis() + dur_ms;
+
+          id(relay1_remaining_sec) = m * 60;
+          id(relay1_remaining_min) = m;
+
+          id(relay1_timer_active) = true;
+          id(relay1_autooff_pending) = false;
+
+      # Optionally ensure fan is ON
+      - if:
+          condition:
+            lambda: |-
+              return ensure_on;
+          then:
+            - if:
+                condition:
+                  switch.is_off: Relay_1
+                then:
+                  - switch.turn_on: Relay_1
+
 ##########################################################################################
 # BINARY SENSORS
 # https://esphome.io/components/binary_sensor/
@@ -168,8 +338,8 @@ binary_sensor:
     pin:
       number: GPIO16
       mode: INPUT
-      inverted: True
+      inverted: true
-    use_interrupt: false # GPO16 pin doesn't support interrupts so use polling.  Only supresses a warning.
+    use_interrupt: false # GPIO16 pin doesn't support interrupts so use polling. Only suppresses a warning.
     name: "Button 1: Extract Fan"
     on_press:
       - switch.toggle: "Relay_1"
@@ -185,14 +355,14 @@ binary_sensor:
       - delayed_off: 20ms
 
     on_multi_click:
-      # ── Single click: one quick press & release ─────────────────
+      # -- Single click: one quick press & release --
       - timing:
           - ON for at most 400ms
           - OFF for at least 200ms
         then:
           - switch.toggle: "Relay_2"
 
-      # ── Double click: two quick presses/releases ───────────────
+      # -- Double click: two quick presses/releases --
       - timing:
           - ON for at most 400ms
           - OFF for at most 400ms
@@ -214,8 +384,37 @@ switch:
     name: "Relay 1: Extract Fan"
     pin: GPIO13
     id: Relay_1
+
+    on_turn_on:
+      then:
+        # Any direct ON of Relay_1 starts a 60 minute cap timer, EXCEPT:
+        # - When a timer/script has already started (prevents MQTT "5" being overwritten to 60)
+        # - When Relay_2 forced Relay_1 ON
+        - if:
+            condition:
+              lambda: |-
+                if (id(relay1_timer_active)) return false;
+                if (id(Relay_2).state && id(relay2_forced_relay1)) return false;
+                return true;
+            then:
+              - script.execute:
+                  id: relay_1_delayed_off
+                  off_delay_min: 60
+                  ensure_on: false
+
     on_turn_off:
       then:
+        # Clear timer state
+        - lambda: |-
+            id(relay1_timer_active) = false;
+            id(relay1_remaining_min) = 0;
+            id(relay1_remaining_sec) = 0;
+            id(relay1_end_ms) = 0;
+            id(relay1_autooff_pending) = false;
+
+        # Stop any pending delayed-off countdown if Relay_1 is turned OFF (by any means)
+        - script.stop: relay_1_delayed_off
+
         # Rule 3: If Relay_1 is turned OFF while Relay_2 is ON, turn OFF Relay_2 too
         - if:
             condition:
@@ -227,6 +426,7 @@ switch:
     name: "Relay 2: IR Heater"
     pin: GPIO12
     id: Relay_2
+
     on_turn_on:
       then:
         # Rule 2: Relay_2 implies Relay_1 must be ON
@@ -247,19 +447,60 @@ switch:
             then:
               - switch.turn_off: Relay_1
 
+        # If a fan timer finished while heater was ON, auto-off fan now (when heater turns OFF)
+        - if:
+            condition:
+              lambda: |-
+                return id(relay1_autooff_pending);
+            then:
+              - lambda: |-
+                  id(relay1_autooff_pending) = false;
+              - if:
+                  condition:
+                    switch.is_on: Relay_1
+                  then:
+                    - switch.turn_off: Relay_1
+
 ##########################################################################################
 # INTERVAL COMPONENT
 # https://esphome.io/components/interval/
 ##########################################################################################
-# An assurance that if Relay_2 (Heater) is ever on, check that Relay_1 (Fan) is on also
+# Assurance: if Relay_2 (Heater) is ever on, check that Relay_1 (Fan) is on also
 ##########################################################################################
 interval:
   - interval: 1s
     then:
+      # Countdown engine (mm:ss)
+      - lambda: |-
+          if (id(relay1_timer_active) && id(Relay_1).state) {
+            int32_t diff = (int32_t) (id(relay1_end_ms) - millis());
+
+            if (diff <= 0) {
+              id(relay1_remaining_sec) = 0;
+              id(relay1_remaining_min) = 0;
+              id(relay1_timer_active) = false;
+
+              // If heater is ON, keep fan running but remember to turn it off when heater turns off
+              if (id(Relay_2).state) {
+                id(relay1_autooff_pending) = true;
+              } else {
+                id(Relay_1).turn_off();
+              }
+            } else {
+              // Ceil to avoid showing 0:00 early
+              int sec = (diff + 999) / 1000;
+              id(relay1_remaining_sec) = sec;
+
+              // Minutes sensor uses ceil minutes (stays 1 until it hits 0:00)
+              id(relay1_remaining_min) = (sec + 59) / 60;
+            }
+          }
+
+      # Safety: if Relay_2 (Heater) is ever on, check that Relay_1 (Fan) is on also
       - if:
           condition:
             and:
               - switch.is_on: Relay_2
               - switch.is_off: Relay_1
           then:
-            - switch.turn_off: Relay_2
+            - switch.turn_off: Relay_2

esphome/esp-mainbathroomlights.yaml

@@ -1,6 +1,7 @@
 ##########################################################################################
 ##########################################################################################
 # MAIN BATHROOM LIGHTSWITCH 2 (OBK Converted, BK7231N)
+# V2.1 2026-02-23 Button 3 multi-click publishes MQTT commands to bathroom fan (1x/2x/3x)
 # V2.0 2026-02-04 Reflash into new switch (old switch electrical failure, now a BK)
 # V1.0 2025-11-23 Initial
 ##########################################################################################
@@ -8,7 +9,7 @@
 # pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
 #
 # NOTES
-# - 
+# -
 #
 ##########################################################################################
 ##########################################################################################
@@ -22,16 +23,22 @@ substitutions:
   device_name: "esp-mainbathroomlights"
   friendly_name: "Main Bathroom Lightswitch (3)"
   description_comment: "BK7231N - Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3)"
-  device_area: "Main Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
+  device_area: "Main Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
-  
+
   # Project Naming
-  project_name: "Zemismart Technologies.KS-811 Triple BK7231N" # Project Details 
+  project_name: "Zemismart Technologies.KS-811 Triple BK7231N" # Project Details
-  project_version: "v1.0"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+  project_version: "v2.1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
 
   # Passwords
   api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
   ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
   static_ip_address: !secret esp-garageentrylights2_ip
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  #mqtt_status_main_topic: !secret mqtt_status_main_topic
+
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
 
   # Device Settings
   log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
@@ -40,11 +47,23 @@ substitutions:
   # Default relay restore mode
   # Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF
   relay_restore_mode: "RESTORE_DEFAULT_OFF"
-  
+
   # Switch Naming
-  switch_1_name: "Main Lights" # Only one light (Garage Side) actually connected to this relay 
+  switch_1_name: "Main Lights" # Only one light (Garage Side) actually connected to this relay
-  switch_2_name: "Shower Lights" # Output for pario string hanging lights 
+  switch_2_name: "Shower Lights" # Output for pario string hanging lights
-  switch_3_name: "Cabinet Lights" # This is virtual only, no power connected to 3rd relay 
+  switch_3_name: "Cabinet Lights" # This is virtual only, no power connected to 3rd relay
+
+  # MQTT LOCAL Controls
+  #mqtt_local_device_name: "masterbath-lights"
+  #mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_local_device_name}" # Topic we will use to command this locally without HA
+  #mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_local_device_name}" # Topic we will use to view status locally without HA
+
+  # MQTT REMOTE Controls
+  mqtt_remote_device1_name: "masterbath-fan"
+  mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}"
+  mqtt_remote_device1_command1: "10"
+  mqtt_remote_device1_command2: "20"
+  mqtt_remote_device1_command3: "30"
 
 ##########################################################################################
 # PACKAGES: Included Common Packages
@@ -58,6 +77,7 @@ packages:
       local_device_name: "${device_name}"
       local_static_ip_address: "${static_ip_address}"
       local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
 
   #### HOME ASSISTANT API (choose encryption or no encryption options) ####
   common_api: !include
@@ -71,7 +91,7 @@ packages:
     file: common/mqtt_common.yaml
     vars:
       local_device_name: "${device_name}"
-  
+
   #### WEB PORTAL ####
   #common_webportal: !include common/webportal_common.yaml
   #### SNTP (Only use if you want/need accurate timeclocks) ####
@@ -83,7 +103,7 @@ packages:
   #diag_debug:       !include common/include_debug_diag_sensors.yaml
   #diag_resetcount:  !include common/include_resetcount_diag_sensors.yaml
 
-  # Package item removals
+# Package item removals
 wifi:
   min_auth_mode: !remove # The WPA2 only works on esp32/8266
   reboot_timeout: 15min    # override the selection from from the common package
@@ -104,7 +124,7 @@ esphome:
   project:
     name: "${project_name}"
     version: "${project_version}"
-#  on_boot:       
+#  on_boot:
 #    priority: 200
 #    then:
 #      - switch.turn_on: Relay_3
@@ -118,18 +138,9 @@ bk72xx:
   board: generic-bk7231n-qfn32-tuya
 
 ##########################################################################################
-# ESP Platform and Framework
-# https://esphome.io/components/esp32.html
-##########################################################################################
-#esp8266:
-#  board: esp01_1m
-#  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
-#  board_flash_mode: dout # Default is dout
-
-##########################################################################################    
 # ESPHome Logging Enable
 # https://esphome.io/components/logger.html
-########################################################################################## 
+##########################################################################################
 logger:
   level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
   baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
@@ -170,8 +181,8 @@ binary_sensor:
       inverted: true
     name: "Button 2: ${switch_2_name}"
     on_press:
-        - delay: 50ms
+      - delay: 50ms
-        - switch.toggle: Relay_2
+      - switch.toggle: Relay_2
 
   - platform: gpio
     pin:
@@ -181,11 +192,48 @@ binary_sensor:
         pullup: true
       inverted: true
     name: "Button 3: ${switch_3_name}"
+
+    # Keep existing actions for ANY press (immediate OFF behavior)
     on_press:
-        - delay: 50ms
+      - delay: 50ms
-        #- switch.turn_off: Relay_1
+      #- switch.turn_off: Relay_1
-        - switch.turn_off: Relay_2
+      - switch.turn_off: Relay_2
-        - switch.turn_off: Relay_3
+      - switch.turn_off: Relay_3
+
+    # Also publish MQTT commands depending on 1x/2x/3x press count
+    on_multi_click:
+      # -- Single click: one quick press & release --
+      - timing:
+          - ON for at most 400ms
+          - OFF for at least 200ms
+        then:
+          - mqtt.publish:
+              topic: "${mqtt_remote_device1_command_topic}"
+              payload: "${mqtt_remote_device1_command1}"
+
+      # -- Double click: two quick presses/releases --
+      - timing:
+          - ON for at most 400ms
+          - OFF for at most 400ms
+          - ON for at most 400ms
+          - OFF for at least 200ms
+        then:
+          - mqtt.publish:
+              topic: "${mqtt_remote_device1_command_topic}"
+              payload: "${mqtt_remote_device1_command2}"
+
+      # -- Triple click: three quick presses/releases --
+      - timing:
+          - ON for at most 400ms
+          - OFF for at most 400ms
+          - ON for at most 400ms
+          - OFF for at most 400ms
+          - ON for at most 400ms
+          - OFF for at least 200ms
+        then:
+          - mqtt.publish:
+              topic: "${mqtt_remote_device1_command_topic}"
+              payload: "${mqtt_remote_device1_command3}"
 
 ##########################################################################################
 # SWITCH COMPONENT
@@ -215,7 +263,6 @@ switch:
 
 ##########################################################################################
 # TEMPLATE COMPONENT
-# 
 ##########################################################################################
 # Virtual group switch for Home Assistant
   - platform: template

esphome/esp-maindishwasherpower.yaml

@@ -31,6 +31,10 @@ substitutions:
   ota_pass: !secret esp-maindishwasherpower_ota_pass # unfortunately you can't use substitutions inside secrets names
   static_ip_address: !secret esp-maindishwasherpower_ip
 
+  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
+  # Don't forget to switch it back when changed.
+  current_ip_address: ${static_ip_address}
+
   # Device Settings
   log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
   update_interval: "60s" # update time for for general sensors etc
@@ -51,6 +55,7 @@ packages:
       local_device_name: "${device_name}"
       local_static_ip_address: "${static_ip_address}"
       local_ota_pass: "${ota_pass}"
+      local_current_ip_address: "${current_ip_address}"
 
   #### HOME ASSISTANT API (choose encryption or no encryption options) ####
   common_api: !include

esphome/esp-mainkitchenlights.yaml

@@ -77,7 +77,7 @@ packages:
       local_device_name: "${device_name}"
   
   #### WEB PORTAL ####
-  #common_webportal: !include common/webportal_common.yaml
+  common_webportal: !include common/webportal_common.yaml
   #### SNTP (Only use if you want/need accurate timeclocks) ####
   #common_sntp:      !include common/sntp_common.yaml
 

esphome/esp-poollightpower2.yaml

@@ -73,8 +73,8 @@ substitutions:
   static_ip_address: !secret esp-poollightpower2_ip
 
   # Device Settings
-  log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
+  log_level: "DEBUG" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
-  update_interval: "10s" # update time for for general sensors etc
+  update_interval: "60s" # update time for for general sensors etc
 
   # Device Settings
   relay_icon: "mdi:power-socket-au"
@@ -178,13 +178,13 @@ esphome:
   project:
     name: "${project_name}"
     version: "${project_version}"
-  #platformio_options:
+  platformio_options:
   #  build_unflags:
   #    - -std=gnu++20
   #    - -std=gnu++2a
-  #  build_flags:
+    build_flags:
   #    - -std=gnu++11
-  #    - -Os
+      - -Os
   #    - -Wl,--gc-sections
   #    - -fno-exceptions
   #    - -fno-rtti
@@ -203,7 +203,7 @@ preferences:
   flash_write_interval: 10min
 
 mdns:
-  disabled: true # binary size saving
+  disabled: False # binary size saving
 
 ##########################################################################################
 # ESPHome Logging Enable

esphome/esp-spare1-athomv1.yaml

@@ -16,8 +16,10 @@
 ##########################################################################################
 substitutions:
   # Device Naming
-  device_name: "esp-maindishwasherspower"
+  #device_name: "esp-maindishwasherspower"
-  friendly_name: "Main Dishwashers Power"
+  device_name: "esp-spare1-athomv1"
+  #friendly_name: "Main Dishwashers Power"
+  friendly_name: "Spare1 Athomv1"
   description_comment: "Main Dishwashers Power Monitor :: Athom Smart Plug Power Monitor V1"
   device_area: "Kitchen"  # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
   

packages/climate_aircon_controls.yaml.old20260213

@@ -1,120 +0,0 @@
-# ------------------------------
-# TIMER HELPER (define in YAML so it definitely exists)
-# ------------------------------
-timer:
-  master_bedroom_climate_timer:
-    name: Master Bedroom Climate Timer
-    duration: "00:00:00"
-
-# ------------------------------
-# DROPDOWN (sleep timer)
-# ------------------------------
-input_select:
-  master_bedroom_climate_timer_duration:
-    name: Master Bedroom Aircon Sleep
-    options:
-      - "1 hour"
-      - "2 hours"
-      - "3 hours"
-      - "6 hours"
-      - "Cancel timer"
-    initial: "Cancel timer"
-    icon: mdi:timer-outline
-
-# ------------------------------
-# LIVE REMAINING (updates immediately on selection, and every minute)
-# ------------------------------
-template:
-  - trigger:
-      # Update once per minute (suits hh:mm display)
-      - platform: time_pattern
-        minutes: "/1"
-
-      # Update when timer STATE changes (idle/active/paused)
-      - platform: state
-        entity_id: timer.master_bedroom_climate_timer
-
-      # Update immediately when user changes the dropdown
-      - platform: state
-        entity_id: input_select.master_bedroom_climate_timer_duration
-
-    sensor:
-      - name: "Master Bedroom Climate Timer Remaining"
-        unique_id: master_bedroom_climate_timer_remaining
-        icon: mdi:timer
-        state: >-
-          {% set st = states('timer.master_bedroom_climate_timer') | lower %}
-          {% if st == 'idle' %}
-            0:00
-          {% else %}
-            {% set fa = state_attr('timer.master_bedroom_climate_timer', 'finishes_at') %}
-            {% if fa %}
-              {% set end = as_datetime(fa) %}
-              {% set sec = (end - now()).total_seconds() | int(0) %}
-              {% if sec < 0 %}{% set sec = 0 %}{% endif %}
-              {% set hh = (sec // 3600) | int %}
-              {% set mm = ((sec % 3600) // 60) | int %}
-              {{ hh }}:{{ '%02d' | format(mm) }}
-            {% else %}
-              0:00
-            {% endif %}
-          {% endif %}
-
-# ------------------------------
-# AUTOMATION: start/cancel timer when dropdown changes
-# ------------------------------
-automation:
-  - alias: "Start or Cancel Master Bedroom Climate Timer"
-    mode: restart
-    trigger:
-      - platform: state
-        entity_id: input_select.master_bedroom_climate_timer_duration
-
-    variables:
-      opt: "{{ states('input_select.master_bedroom_climate_timer_duration') }}"
-      dur_map:
-        "1 hour": "01:00:00"
-        "2 hours": "02:00:00"
-        "3 hours": "03:00:00"
-        "6 hours": "06:00:00"
-
-    action:
-      - choose:
-          - conditions:
-              - condition: template
-                value_template: "{{ opt in dur_map }}"
-            sequence:
-              - service: timer.cancel
-                target:
-                  entity_id: timer.master_bedroom_climate_timer
-              - delay: "00:00:01"
-              - service: timer.start
-                target:
-                  entity_id: timer.master_bedroom_climate_timer
-                data:
-                  duration: "{{ dur_map[opt] }}"
-
-          - conditions:
-              - condition: state
-                entity_id: input_select.master_bedroom_climate_timer_duration
-                state: "Cancel timer"
-            sequence:
-              - service: timer.cancel
-                target:
-                  entity_id: timer.master_bedroom_climate_timer
-
-  - alias: "Turn Off Master Bedroom Climate on Timer Completion"
-    trigger:
-      - platform: event
-        event_type: timer.finished
-        event_data:
-          entity_id: timer.master_bedroom_climate_timer
-    action:
-      - service: climate.turn_off
-        target:
-          entity_id: climate.master_bedroom
-      - service: input_select.select_option
-        target:
-          entity_id: input_select.master_bedroom_climate_timer_duration
-        data:
-          option: "Cancel timer"

packages/climate_master_bedroom_dehum.yaml.old20260213

@@ -1,24 +0,0 @@
-automation:
-  # Automation to turn on the heat pump at 9pm in the master bedroom (if switched on with the helper)
-  - id: master_bedroom_offpeak_dehumidify
-    alias: Master Bedroom Off-Peak Dehumidify
-    mode: single
-    triggers:
-      - trigger: time
-        at: "21:00:00"
-    conditions:
-      - condition: state
-        entity_id: input_boolean.master_bedroom_offpeak_dehumidify
-        state: "on"
-    actions:
-      - action: climate.set_hvac_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          hvac_mode: "heat_cool"
-      - wait_for_trigger:
-          - trigger: time
-            at: "00:00:00"
-      - action: climate.turn_off
-        target:
-          entity_id: climate.master_bedroom

packages/climate_master_bedroom_night_cycle.yaml.old

@@ -1,85 +0,0 @@
-input_select:
-  heat_pump_temperature_threshold:
-    name: Master Bedroom Night Cycle Temperature Min
-    options:
-      - "18"
-      - "19"
-      - "20"
-      - "21"
-      - "22"
-      - "23"
-    initial: "20"
-    icon: mdi:thermometer
-
-input_boolean:
-  heat_pump_automation:
-    name: Enable Heat Pump Master Bedroom Night Cycling
-    initial: off
-
-automation:
-  - alias: "Master Bedroom Heat Pump Night Cycling"
-    description: "Turns the climate.master_bedroom to 'cool' for 15 minutes every hour if temperature is below the selected threshold."
-    trigger:
-      - platform: time_pattern # Use time_pattern to run the automation on a recurring schedule.
-        minutes: "/30" # The "0" means on the hour or "/15" means every 15 minutes.
-    condition:
-      # Ensure the automation is enabled
-      - condition: state
-        entity_id: input_boolean.heat_pump_automation
-        state: "on"
-      # Check that the current temperature is above the selected threshold
-      - condition: template
-        value_template: >
-          {{ states('sensor.master_bedroom_environment_zth01_temperature_2') | float > states('input_select.heat_pump_temperature_threshold') | float }}
-    # Actions: Define the steps of the automation.
-    action:
-      # Action 1: Turn on the heat pump by setting HVAC mode to "cool".
-      - service: climate.set_hvac_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          hvac_mode: cool
-      # Action 2: Keep the heat pump on for x minutes.
-      - delay: "00:10:00"
-      # Action 3: Turn off the heat pump.
-      # Some integrations do not support hvac_mode: off via climate.set_hvac_mode,
-      # so we use the dedicated climate.turn_off service.
-      - service: climate.turn_off
-        target:
-          entity_id: climate.master_bedroom
-    mode: single # Ensures only one instance of this automation runs at a time.
-
-  # always switch off the automation at 5am
-  - alias: "Disable Heat Pump Automation at 5AM"
-    description: "Automatically turns off the heat pump automation (input_boolean.heat_pump_automation) at 5 AM."
-    trigger:
-      - platform: time
-        at: "04:59:00"
-    action:
-      - service: input_boolean.turn_off
-        target:
-          entity_id: input_boolean.heat_pump_automation
-    mode: single
-
-  # ensure the heat pump is off at 5am if not already
-  - alias: "Ensure Heat Pump Off at 5 AM"
-    trigger:
-      - platform: time
-        at: "05:00:00"
-    action:
-      - service: climate.turn_off
-        target:
-          entity_id: climate.master_bedroom
-    mode: single
-
-  # ensure the automation is off on a HA reboot
-  - alias: "Ensure Heat Pump Automation is Off on Startup"
-    description: "Turns off the heat pump automation (input_boolean.heat_pump_automation) when Home Assistant starts."
-    trigger:
-      - platform: homeassistant
-        event: start
-    action:
-      - service: input_boolean.turn_off
-        target:
-          entity_id: input_boolean.heat_pump_automation
-    mode: single

packages/ev_charging.yaml

@@ -35,6 +35,15 @@ sensor:
     #unit_prefix: k
     round: 0
 
+  - platform: filter
+    name: "32A EV Charger Power 1m Avg"
+    unique_id: ev_charger_32a_power_1m_avg
+    entity_id: sensor.main_house_3_phase_power_monitor_ev_wallcharger_power
+    filters:
+      - filter: time_simple_moving_average
+        window_size: "00:01"
+        precision: 3
+
 input_select:
   leaf_ev_charging_mode:
     icon: mdi:ev-plug-type1
@@ -65,7 +74,6 @@ automation:
 
 template:
   - trigger:
-      # Update at least every 10 seconds (and also on HA start)
       - platform: time_pattern
         seconds: "/10"
       - platform: homeassistant
@@ -75,7 +83,7 @@ template:
         unique_id: ev_charger_32a_charging
         icon: mdi:car-electric
         state: >-
-          {{ (states('sensor.32a_ev_wallcharger_power') | float(0)) > 0.1 }}
+          {{ states('sensor.32a_ev_charger_power_1m_avg') | float(0) > 0.1 }}
         delay_on:
           seconds: 60
         delay_off:

packages/heat_pump_helpers.yaml.old20260213

@@ -1,309 +0,0 @@
-##########################################################################################
-# heat_pump_helpers.yaml
-#
-# Panasonic Comfort Cloud (panasonic_cc) helpers for Heat/Cool control + presets.
-#
-# Purpose:
-# - Provide "optimistic" UI feedback for cloud/slow mode changes
-# - Provide one-tap scripts for Off/Heat/Cool/Dehumid
-# - Provide a 3-step "Profile" cycler (Normal/Boost/Quiet) using preset_mode:
-#     * preset_mode: boost  -> Powerful ON (we label this "Boost")
-#     * preset_mode: eco    -> Quiet ON   (we label this "Quiet")
-#     * preset_mode: none   -> Powerful OFF + Quiet OFF (we label this "Normal")
-#
-# Notes:
-# - Your climate entity supports preset_modes: [none, eco, boost]
-# - The switch.lounge_ai_eco entity appears to be read-only (cannot be controlled),
-#   so "Eco" and "Eco/Quiet" profiles have been removed.
-# - When turning the heat pump OFF, we also force preset_mode to "none" so that
-#   Boost/Quiet are cleared.
-##########################################################################################
-
-input_select:
-  # Used by your dashboard buttons to "light up" instantly (optimistic state).
-  # When set to something other than "none", the UI can treat that as "pending".
-  master_bedroom_hvac_requested_mode:
-    name: Master Bedroom HVAC Requested Mode
-    options:
-      - "none"
-      - "off"
-      - "heat"
-      - "cool"
-      - "dry"
-    initial: "none"
-
-  # Heat pump profile selector shown on the dashboard and cycled with one tap.
-  master_bedroom_heat_pump_profile:
-    name: Master Bedroom Heat Pump Profile
-    options:
-      - Normal
-      - Boost
-      - Quiet
-    initial: Normal
-
-script:
-  ########################################################################################
-  # One-tap HVAC mode scripts
-  # These set the optimistic helper first, then call the real climate services.
-  #
-  # IMPORTANT:
-  # - Off also clears Boost/Quiet by forcing preset_mode to "none".
-  ########################################################################################
-
-  master_bedroom_hvac_off:
-    alias: Master Bedroom HVAC - Off
-    mode: restart
-    sequence:
-      # Optimistic UI: show "Off" immediately
-      - service: input_select.select_option
-        target:
-          entity_id: input_select.master_bedroom_hvac_requested_mode
-        data:
-          option: "off"
-
-      # Turn the unit off (more reliable than set_hvac_mode off on many cloud integrations)
-      - service: climate.turn_off
-        target:
-          entity_id: climate.master_bedroom
-
-      # Clear Panasonic preset flags: none = Boost OFF + Quiet OFF
-      - service: climate.set_preset_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          preset_mode: "none"
-
-  master_bedroom_hvac_heat:
-    alias: Master Bedroom HVAC - Heat
-    mode: restart
-    sequence:
-      - service: input_select.select_option
-        target:
-          entity_id: input_select.master_bedroom_hvac_requested_mode
-        data:
-          option: "heat"
-
-      - service: climate.turn_on
-        target:
-          entity_id: climate.master_bedroom
-
-      - service: climate.set_hvac_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          hvac_mode: "heat"
-
-  master_bedroom_hvac_cool:
-    alias: Master Bedroom HVAC - Cool
-    mode: restart
-    sequence:
-      - service: input_select.select_option
-        target:
-          entity_id: input_select.master_bedroom_hvac_requested_mode
-        data:
-          option: "cool"
-
-      - service: climate.turn_on
-        target:
-          entity_id: climate.master_bedroom
-
-      - service: climate.set_hvac_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          hvac_mode: "cool"
-
-  master_bedroom_hvac_dry:
-    alias: Master Bedroom HVAC - Dehumid
-    mode: restart
-    sequence:
-      - service: input_select.select_option
-        target:
-          entity_id: input_select.master_bedroom_hvac_requested_mode
-        data:
-          option: "dry"
-
-      - service: climate.turn_on
-        target:
-          entity_id: climate.master_bedroom
-
-      - service: climate.set_hvac_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          hvac_mode: "dry"
-
-  ########################################################################################
-  # Profile logic: Apply + Cycle
-  #
-  # Profile definitions (Panasonic CC / panasonic_cc):
-  # - Normal -> preset_mode none  (Boost OFF, Quiet OFF)
-  # - Boost  -> preset_mode boost (Powerful ON)
-  # - Quiet  -> preset_mode eco   (Quiet ON)
-  #
-  # The profile selector is kept in-sync with the actual preset_mode via automation.
-  ########################################################################################
-
-  master_bedroom_heat_pump_profile_apply:
-    alias: Master Bedroom Heat Pump - Apply Profile
-    mode: restart
-    fields:
-      profile:
-        description: Profile name (Normal, Boost, Quiet)
-        example: Normal
-    sequence:
-      - variables:
-          p: "{{ profile | default(states('input_select.master_bedroom_heat_pump_profile')) }}"
-          preset_for_profile: >-
-            {% if p == 'Normal' %}none
-            {% elif p == 'Boost' %}boost
-            {% elif p == 'Quiet' %}eco
-            {% else %}none
-            {% endif %}
-
-      # Optional: ensure the unit is on when applying a profile.
-      # Comment out if you want profile selection while the unit is off.
-      - service: climate.turn_on
-        target:
-          entity_id: climate.master_bedroom
-
-      # Set preset explicitly every time so Boost/Quiet are mutually exclusive
-      - service: climate.set_preset_mode
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          preset_mode: "{{ preset_for_profile }}"
-
-  master_bedroom_heat_pump_profile_next:
-    alias: Master Bedroom Heat Pump - Next Profile
-    mode: restart
-    sequence:
-      - variables:
-          cur: "{{ states('input_select.master_bedroom_heat_pump_profile') }}"
-          nxt: >-
-            {% if cur == 'Normal' %}Boost
-            {% elif cur == 'Boost' %}Quiet
-            {% else %}Normal
-            {% endif %}
-
-      # Store the new selection (UI)
-      - service: input_select.select_option
-        target:
-          entity_id: input_select.master_bedroom_heat_pump_profile
-        data:
-          option: "{{ nxt }}"
-
-      # Apply it to the heat pump
-      - service: script.turn_on
-        target:
-          entity_id: script.master_bedroom_heat_pump_profile_apply
-        data:
-          variables:
-            profile: "{{ nxt }}"
-
-automation:
-  ########################################################################################
-  # Clear "requested mode" once the climate entity catches up, so the UI reflects reality.
-  # This prevents two mode buttons appearing lit due to stale cloud attributes.
-  ########################################################################################
-  - id: master_bedroom_hvac_clear_requested_mode
-    alias: Master Bedroom HVAC - Clear Requested Mode
-    mode: restart
-    trigger:
-      - platform: state
-        entity_id: climate.master_bedroom
-
-      - platform: state
-        entity_id: input_select.master_bedroom_hvac_requested_mode
-        to:
-          - "off"
-          - "heat"
-          - "cool"
-          - "dry"
-
-    condition:
-      - condition: template
-        value_template: >
-          {{ states('input_select.master_bedroom_hvac_requested_mode') != 'none' }}
-
-    action:
-      # Small delay to allow the cloud integration to reflect the change
-      - delay: "00:00:03"
-
-      - choose:
-          - conditions:
-              - condition: template
-                value_template: >
-                  {% set req = states('input_select.master_bedroom_hvac_requested_mode') %}
-                  {% set mode = states('climate.master_bedroom') %}
-                  {% set action = (state_attr('climate.master_bedroom','hvac_action') or '') %}
-                  {{ (req == 'off' and (mode == 'off' or action == 'off'))
-                    or (req in ['heat','cool','dry'] and mode == req) }}
-            sequence:
-              - service: input_select.select_option
-                target:
-                  entity_id: input_select.master_bedroom_hvac_requested_mode
-                data:
-                  option: "none"
-
-        default:
-          # Failsafe: if the cloud entity is slow or ambiguous, clear after a while anyway
-          - delay: "00:00:25"
-          - service: input_select.select_option
-            target:
-              entity_id: input_select.master_bedroom_hvac_requested_mode
-            data:
-              option: "none"
-
-  ########################################################################################
-  # Sync the Profile selector from actual device preset_mode (including changes made in
-  # the Panasonic app). This keeps the UI truthful.
-  #
-  # Mapping:
-  # - preset boost -> Boost
-  # - preset eco   -> Quiet
-  # - preset none  -> Normal
-  ########################################################################################
-  - id: master_bedroom_heat_pump_profile_sync_from_entities
-    alias: Master Bedroom Heat Pump - Sync Profile From Entities
-    mode: restart
-    trigger:
-      - platform: state
-        entity_id: climate.master_bedroom
-    action:
-      - delay: "00:00:02"
-      - variables:
-          preset: "{{ state_attr('climate.master_bedroom', 'preset_mode') or 'none' }}"
-          new_profile: >-
-            {% if preset == 'boost' %}
-              Boost
-            {% elif preset == 'eco' %}
-              Quiet
-            {% else %}
-              Normal
-            {% endif %}
-      - choose:
-          - conditions:
-              - condition: template
-                value_template: "{{ states('input_select.master_bedroom_heat_pump_profile') != new_profile }}"
-            sequence:
-              - service: input_select.select_option
-                target:
-                  entity_id: input_select.master_bedroom_heat_pump_profile
-                data:
-                  option: "{{ new_profile }}"
-
-template:
-  - sensor:
-      - name: Master Bedroom Heat Pump Profile Tile
-        unique_id: master_bedroom_heat_pump_profile_tile
-        state: "{{ states('input_select.master_bedroom_heat_pump_profile') }}"
-        icon: >
-          {% set p = states('input_select.master_bedroom_heat_pump_profile') %}
-          {% if p == 'Boost' %}
-            mdi:rocket-launch
-          {% elif p == 'Quiet' %}
-            mdi:leaf
-          {% else %}
-            mdi:gauge
-          {% endif %}

packages/heat_pump_set_point_cloud_helpers.yaml.old20260213

@@ -1,76 +0,0 @@
-input_number:
-  master_bedroom_setpoint_ui:
-    name: Master Bedroom Setpoint UI
-    min: 10
-    max: 30
-    step: 0.5
-    mode: box
-    unit_of_measurement: "°C"
-    icon: mdi:thermometer
-
-script:
-  master_bedroom_setpoint_sync_from_climate:
-    alias: Master Bedroom Setpoint Sync From Climate
-    mode: restart
-    sequence:
-      - variables:
-          sp: "{{ state_attr('climate.master_bedroom', 'temperature') | float(0) }}"
-      - service: input_number.set_value
-        target:
-          entity_id: input_number.master_bedroom_setpoint_ui
-        data:
-          value: "{{ sp }}"
-
-  master_bedroom_setpoint_adjust:
-    alias: Master Bedroom Setpoint Adjust
-    mode: queued
-    fields:
-      step:
-        description: "Step in degrees C, e.g. -0.5 or 0.5"
-        example: -0.5
-    sequence:
-      # ─────────────────────────────
-      # GUARD: only block when climate is OFF/unavailable/unknown
-      # (Do NOT use hvac_action == idle - Panasonic cloud often reports idle)
-      # ─────────────────────────────
-      - condition: template
-        value_template: >
-          {% set s = states('climate.master_bedroom') | lower %}
-          {{ s not in ['off', 'unavailable', 'unknown', 'none', ''] }}
-
-      # ─────────────────────────────
-      # Compute new setpoint
-      # Prefer UI helper if valid, otherwise use climate temp
-      # ─────────────────────────────
-      - variables:
-          cur_ui: "{{ states('input_number.master_bedroom_setpoint_ui') | float(0) }}"
-          cur_cl: "{{ state_attr('climate.master_bedroom', 'temperature') | float(0) }}"
-          cur: "{{ cur_ui if cur_ui > 0 else cur_cl }}"
-          raw: "{{ cur + (step | float(0)) }}"
-          new: "{{ [30, [10, raw] | max] | min | round(1) }}"
-
-      # Update UI immediately
-      - service: input_number.set_value
-        target:
-          entity_id: input_number.master_bedroom_setpoint_ui
-        data:
-          value: "{{ new }}"
-
-      # Send to climate (cloud may lag)
-      - service: climate.set_temperature
-        target:
-          entity_id: climate.master_bedroom
-        data:
-          temperature: "{{ new }}"
-
-automation:
-  - id: master_bedroom_setpoint_sync
-    alias: Master Bedroom Setpoint Sync
-    mode: restart
-    trigger:
-      - platform: state
-        entity_id: climate.master_bedroom
-      - platform: homeassistant
-        event: start
-    action:
-      - service: script.master_bedroom_setpoint_sync_from_climate

packages/openhasp_lounge1_wallplate.yaml

@@ -10,7 +10,8 @@ input_number:
     max: 30
     step: 0.5
     mode: box
-    unit_of_measurement: "C"
+    unit_of_measurement: "℃"
+    initial: 21.5
 
 ###############################################################################
 # AUTOMATIONS
@@ -22,12 +23,12 @@ automation:
     mode: queued
     trigger:
       - platform: state
-        entity_id: sensor.lounge_inside_temperature
+        entity_id: sensor.lounge_environment_lounge_environment_temperature
     action:
       - service: mqtt.publish
         data:
           topic: "hasp/openhasp_1/command/p1b1.text"
-          payload: "{{ states('sensor.lounge_inside_temperature')|float(0)|round(1) }} C"
+          payload: "{{ states('sensor.lounge_environment_lounge_environment_temperature')|float(0)|round(1) }} °C"
 
   - id: hasp_setpoint_to_btn_text
     alias: "HASP: update setpoint (p1b2.text)"
@@ -39,7 +40,9 @@ automation:
       - service: mqtt.publish
         data:
           topic: "hasp/openhasp_1/command/p1b2.text"
-          payload: "Set: {{ states('input_number.lounge_setpoint')|float(0)|round(1) }} C"
+          payload: "Set: {{ states('input_number.lounge_setpoint')|float(0)|round(1) }} °C"
+          qos: 1
+          retain: true
 
   - id: hasp_heater_status_to_btn_text
     alias: "HASP: update heater status (p1b5.text)"
@@ -90,18 +93,24 @@ automation:
   # --- PUSH INITIAL VALUES ON HA START / PANEL ONLINE -----------------------
   - id: hasp_push_on_ha_start
     alias: "HASP: push texts on HA start"
+    mode: queued
     trigger:
       - platform: homeassistant
         event: start
     action:
       - service: script.hasp_push_all_texts
 
-  - id: hasp_push_on_plate_birth
+  - id: hasp_push_on_panel_online
-    alias: "HASP: push texts on panel birth"
+    alias: "HASP: push texts when panel goes online"
+    mode: queued
     trigger:
       - platform: mqtt
-        topic: "hasp/openhasp_1/state"
+        topic: "hasp/openhasp_1/status"
+    condition:
+      - condition: template
+        value_template: "{{ trigger.payload == 'online' }}"
     action:
+      - delay: "00:00:05"
       - service: script.hasp_push_all_texts
 
 ###############################################################################
@@ -115,11 +124,15 @@ script:
       - service: mqtt.publish
         data:
           topic: "hasp/openhasp_1/command/p1b1.text"
-          payload: "{{ states('sensor.lounge_inside_temperature')|float(0)|round(1) }} C"
+          payload: "{{ states('sensor.lounge_environment_lounge_environment_temperature')|float(0)|round(1) }} °C"
+
       - service: mqtt.publish
         data:
           topic: "hasp/openhasp_1/command/p1b2.text"
-          payload: "Set: {{ states('input_number.lounge_setpoint')|float(0)|round(1) }} C"
+          payload: "Set: {{ states('input_number.lounge_setpoint')|float(0)|round(1) }} °C"
+          qos: 1
+          retain: true
+
       - service: mqtt.publish
         data:
           topic: "hasp/openhasp_1/command/p1b5.text"