various incl zha quirks

2024-12-13 14:33:44 +13:00
parent 20044d73ea
commit 70ed59fef8
34 changed files with 1432 additions and 902 deletions
--- a/esphome/esp-winefridge.yaml.temp
+++ b/esphome/esp-winefridge.yaml.temp
@@ -0,0 +1,228 @@
+#############################################
+#############################################
+
+#############################################
+#############################################
+
+#############################################
+# Variable Substitutions
+# Give this a useful name & description here
+# and change values accordingly
+#############################################
+substitutions:
+  devicename: "esp-winefridge"
+  friendly_name: "Wine Fridge Controller"
+  description_comment: "Peltier based wine fridge thermostat controller"
+
+  #if NOT using a secrets file, just replace these with the passwords etc in speech marks
+  api_key: !secret esp-winefridge_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-winefridge_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_pass: !secret wifi_password
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+  update_time: 30s #update time for for various temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  comment: ${description_comment} #appears on the esphome page in HA
+  #on_boot:    #Initial Setting stuff
+    #priority: -200
+    #then:
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html OR
+# https://esphome.io/components/esp8266.html
+#############################################
+#esp32:
+#  board: 
+#  framework:
+#    type: arduino
+#    #type: esp-idf  #Suggested Use ESP-IDF Framework for ESP32, or unplugging the UART Cable Might Cause ESP32 Hang. 
+#    version: recommended #recommended, latest or dev
+
+esp8266:
+  board: d1_mini
+
+
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_pass}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: 192.168.x.x
+    #gateway: 192.168.X.x
+    #subnet: 255.255.255.0
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: $devicename fallback AP
+    password: !secret fallback_ap_password
+    ap_timeout: 30min #default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off if you don't really need it
+# is probably a good idea to save resources.
+# Also, don't use it with other big ESP32 components
+# such as Bluetooth proxy (it will run out of flash
+# and not compile, or it will crash occasionally)
+# https://esphome.io/components/web_server.html
+#############################################   
+web_server:
+  port: 80
+#  version: 1 #V1 occasionally works better, V2 The nicer page
+#   username: !secret web_server_username #probably a good idea to secure it
+#    password: !secret web_server_password
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+
+#############################################
+# General espHome status LED
+# Not needed, but can be useful to see issues
+# https://esphome.io/components/status_led.html
+#############################################
+status_led:
+  pin:
+    number: GPIO2 #Wemos ESP32 and ESP8266 Onboard LEDs use GPIO2
+    inverted: false
+    #ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
+
+#############################################
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+#############################################
+sensor:
+
+  ################################
+  # UPTIME
+  # Device uptime info	
+  # https://esphome.io/components/sensor/uptime.html
+  ################################
+  - platform: uptime
+    name: ${friendly_name} Uptime
+
+  ################################
+  # WIFI SIGNAL
+  # Quality of Wifi in dBm
+  # https://esphome.io/components/sensor/wifi_signal.html
+  ################################
+  - platform: wifi_signal
+    name: ${friendly_name} WiFi Signal
+    update_interval: ${update_time}
+    #retain: true #retain useful if sleeping
+  
+  - platform: resistance
+    sensor: temp_analogue
+    configuration: DOWNSTREAM
+    resistor: 4.7kOhm
+    name: Resistance Sensor
+
+  - platform: adc
+    id: temp_analogue
+    #update_interval: 10s
+    update_interval: never #don't update until the correect GPIO turns on.  This allows two devices on one AI.
+    name: "Temp Analogue"
+    pin: A0
+    filters:
+      - multiply: 3.3
+
+  - platform: template
+    name: "Analogue Sensor 1"
+    update_interval: never
+    id: template_analoguesensor_1
+    lambda: |-
+      return id(temp_analogue);
+
+  - platform: template
+    name: "Analogue Sensor 2"
+    update_interval: never
+    id: template_analoguesensor_2
+    lambda: |-
+      return id(temp_analogue);
+    # lambda: |- return float(id(ch1s));
+
+switch:
+  - platform: gpio
+    pin: D0
+    id: a1_sensor_vcc
+
+  - platform: gpio
+    pin: D1
+    id: a2_sensor_vcc
+
+interval:
+  - interval: 60s
+    then:
+      - switch.turn_on: a1_sensor_vcc
+      - component.update: temp_analogue
+      - component.update: template_analoguesensor_1
+      - switch.turn_off: a1_sensor_vcc
+      - switch.turn_on: a2_sensor_vcc
+      - component.update: temp_analogue
+      - component.update: template_analoguesensor_2
+      - switch.turn_off: a2_sensor_vcc
+
+
+