esphome mi 1s lamp
This commit is contained in:
root
189
esphome/esp-entbtproxy.yaml
Normal file
189
esphome/esp-entbtproxy.yaml
Normal file
@@ -0,0 +1,189 @@
|
||||
#############################################
|
||||
# Variable Substitutions
|
||||
# Give the device a useful name & description here
|
||||
# and change values accordingly.
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: "esp-entbtproxy"
|
||||
friendly_name: "Outside Entrance Bluetooth Proxy"
|
||||
description_comment: "D1 Mini ESP32 outside entranceway with BT Proxy"
|
||||
|
||||
#if NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
api_key: !secret esp-entbyproxy_api_key #unfortunately you can't use substitutions in secrets names
|
||||
ota_pass: !secret esp-entbtproxy_ota_pass #unfortunately you can't use substitutions in secrets names
|
||||
wifi_ssid: !secret wifi_ssid
|
||||
wifi_password: !secret wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
#Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
#static_ip_address: !secret esp-entmulti_static_ip
|
||||
#static_ip_gateway: !secret esp-entmulti_gateway
|
||||
#static_ip_subnet: !secret esp-entmulti_subnet
|
||||
|
||||
mqtt_server: !secret mqtt_server
|
||||
mqtt_username: !secret mqtt_username
|
||||
mqtt_password: !secret mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
update_time: 30s #update time for for general temp sensors etc
|
||||
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0 #
|
||||
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
#type: arduino
|
||||
type: esp-idf #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang.
|
||||
version: recommended #recommended, latest or dev
|
||||
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
# on_client_connected:
|
||||
# - esp32_ble_tracker.start_scan:
|
||||
# continuous: true
|
||||
# on_client_disconnected:
|
||||
# - esp32_ble_tracker.stop_scan:
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
#manual_ip: #optional static IP address
|
||||
#static_ip: ${static_ip_address}
|
||||
#gateway: ${static_ip_gateway}
|
||||
#subnet: ${static_ip_subnet}
|
||||
ap: #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: $devicename fallback AP
|
||||
password: !secret fallback_ap_password
|
||||
ap_timeout: 5min #Time until it brings up fallback AP. default is 1min
|
||||
|
||||
captive_portal:
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is probably a good idea to save resources.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} #probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
|
||||
|
||||
#############################################
|
||||
# Bluetooth
|
||||
# https://esphome.io/components/bluetooth_proxy.html
|
||||
# https://esphome.io/components/esp32_ble_tracker.html
|
||||
# Remember that this takes a LOT of processing. On the
|
||||
# ESP32, enable the IDF framework, and disable the
|
||||
# Web server component. Changing to the IDF framework
|
||||
# needs to be via cable not OTA to change the
|
||||
# partition setup.
|
||||
#############################################
|
||||
bluetooth_proxy:
|
||||
active: true
|
||||
|
||||
esp32_ble_tracker:
|
||||
scan_parameters:
|
||||
# We currently use the defaults to ensure Bluetooth
|
||||
# can co-exist with WiFi In the future we may be able to
|
||||
# enable the built-in coexistence logic in ESP-IDF
|
||||
active: true
|
||||
|
||||
|
||||
button:
|
||||
- platform: safe_mode
|
||||
id: button_safe_mode
|
||||
name: Safe Mode Boot
|
||||
|
||||
- platform: factory_reset
|
||||
id: factory_reset_btn
|
||||
name: Factory reset
|
||||
|
||||
|
||||
sensor:
|
||||
################################
|
||||
# WIFI SIGNAL
|
||||
# Quality of Wifi in dBm
|
||||
# https://esphome.io/components/sensor/wifi_signal.html
|
||||
################################
|
||||
- platform: wifi_signal
|
||||
name: ${friendly_name} WiFi Signal
|
||||
update_interval: 20s
|
||||
#retain: true #retain useful if sleeping
|
||||
|
||||
- platform: uptime
|
||||
name: ${friendly_name} Uptime
|
||||
update_interval: 10s
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user