esphome mi 1s lamp
This commit is contained in:
root
247
esphome/esp-leafbat.yaml
Normal file
247
esphome/esp-leafbat.yaml
Normal file
@@ -0,0 +1,247 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# BYD ATTO3 12V Battery Monitor
|
||||
# Monitoring the status of a vehicle 12V battery with
|
||||
# an esp8266 (D1 Mini). It will obviously only
|
||||
# transmit when the vehicle is within wifi range.
|
||||
# Voltage is measured with a resistor voltage divider
|
||||
# into the analogue GPIO on the esp8266.
|
||||
# https://zorruno.com/2022/vehicle-12v-battery-monitoring/
|
||||
##############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# Variable Substitutions
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: "esp-leafbat"
|
||||
friendly_name: "Nissan Leaf 12V Battery Monitor"
|
||||
description_comment: "Nissan Leaf 12V Battery Monitor (when home)"
|
||||
api_key: !secret esp-leafbat_api_key #unfortunately you can't use substitutions in secrets names
|
||||
ota_pass: !secret esp-leafbat_ota_pass #unfortunately you can't use substitutions in secrets names
|
||||
wifi_ssid: !secret wifi_ssid
|
||||
wifi_password: !secret wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
#Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
#A static IP will speed things up slightly in that it doesn't have to negotiate DHCP
|
||||
static_ip_address: !secret esp-leafbat_static_ip
|
||||
static_ip_gateway: !secret esp-leafbat_gateway
|
||||
static_ip_subnet: !secret esp-leafbat_subnet
|
||||
|
||||
mqtt_server: !secret mqtt_server
|
||||
mqtt_username: !secret mqtt_username
|
||||
mqtt_password: !secret mqtt_password
|
||||
mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
|
||||
mqtt_commandstopic: "viewroad-commands" #main topic for commands (ie sleep), call it what you like
|
||||
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
update_time: 10s #update time for for general temp sensors etc
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp8266.html
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: d1_mini
|
||||
framework:
|
||||
version: latest #recommended, latest or dev
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: INFO #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#uart:
|
||||
# id: uart_output
|
||||
# tx_pin: GPIO12
|
||||
# rx_pin: GPIO13
|
||||
# baud_rate: 9600
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: ${api_key}
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
manual_ip: #optional static IP address
|
||||
static_ip: ${static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
ap: #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${devicename} fallback AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
#############################################
|
||||
web_server:
|
||||
port: 80
|
||||
#version: 2
|
||||
#include_internal: true
|
||||
#ota: false
|
||||
#auth:
|
||||
#username: ${web_server_username}
|
||||
#password: ${web_server_password}
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${devicename}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
|
||||
# Availability Topic
|
||||
birth_message:
|
||||
topic: ${mqtt_topic}/${devicename}/availability
|
||||
payload: online
|
||||
will_message:
|
||||
topic: ${mqtt_topic}/${devicename}/availability
|
||||
payload: offline
|
||||
|
||||
# A way to prevent deep sleep using MQTT command
|
||||
on_message:
|
||||
- topic: ${mqtt_commandstopic}/${devicename}/deepsleep
|
||||
payload: 'OFF'
|
||||
then:
|
||||
- deep_sleep.prevent: deep_sleep_1
|
||||
- topic: ${mqtt_commandstopic}/${devicename}/deepsleep
|
||||
payload: 'ON'
|
||||
then:
|
||||
- deep_sleep.enter: deep_sleep_1
|
||||
|
||||
########################################
|
||||
# Deep Sleep
|
||||
# https://esphome.io/components/deep_sleep.html
|
||||
########################################
|
||||
deep_sleep:
|
||||
run_duration: 20s
|
||||
sleep_duration: 5min
|
||||
id: deep_sleep_1
|
||||
|
||||
#time:
|
||||
# - platform: homeassistant
|
||||
# id: ha_time
|
||||
# timezone: Pacific/Auckland
|
||||
|
||||
#text_sensor:
|
||||
# - platform: template
|
||||
# name: "Current time"
|
||||
# id: current_time
|
||||
# lambda: return id(ha_time).now().strftime("%H%M");
|
||||
# lambda: |-
|
||||
# char str[17];
|
||||
# time_t currTime = id(ha_time).now().timestamp;
|
||||
# strftime(str, sizeof(str), "%Y-%m-%d %H:%M", localtime(&currTime));
|
||||
# return { str };
|
||||
# update_interval: ${update_time}
|
||||
|
||||
#############################################
|
||||
#############################################
|
||||
# MAIN SENSORS
|
||||
#############################################
|
||||
#############################################
|
||||
sensor:
|
||||
#Quality of Wifi in dBm
|
||||
- platform: wifi_signal
|
||||
name: "WiFi Signal"
|
||||
id: wifi_strength
|
||||
update_interval: ${update_time}
|
||||
retain: true #Retain this as you'll have no value between sleeps otherwise
|
||||
#Analog sensor for voltage reading (A0)
|
||||
- platform: uptime
|
||||
name: "Uptime"
|
||||
update_interval: ${update_time}
|
||||
retain: true #Retain this as you'll have no value between sleeps otherwise
|
||||
- platform: adc
|
||||
pin: A0
|
||||
name: "Battery Voltage"
|
||||
id: battery_voltage
|
||||
#mqtt_id: battery_voltage
|
||||
update_interval: ${update_time}
|
||||
retain: true #Retain this as you'll have no value between sleeps otherwise
|
||||
# This set used a voltage divider with a 100k and a 4.7k R value
|
||||
filters:
|
||||
- multiply: 3.3 #D1 mini V divider, 3.3V -> 1V on esp8266
|
||||
- calibrate_linear: #Read values with voltmeter and bench supply
|
||||
- 0.72 -> 16.00
|
||||
- 0.68 -> 15.00
|
||||
- 0.63 -> 14.00
|
||||
- 0.59 -> 13.00
|
||||
- 0.55 -> 12.00
|
||||
- 0.51 -> 11.00
|
||||
- 0.45 -> 10.00
|
||||
- 0.40 -> 09.00
|
||||
- 0.36 -> 08.00
|
||||
- 0.32 -> 07.00
|
||||
- 0.28 -> 06.00
|
||||
- 0.23 -> 05.00
|
||||
# on_value:
|
||||
# - logger.log:
|
||||
# level: INFO
|
||||
# format: "time,%s,battery,%.1f,wifi,%.1f"
|
||||
# args: [ 'id(ha_time).now()', 'id(battery_voltage).state', 'id(wifi_strength).state' ]
|
||||
|
||||
# - uart.write:
|
||||
# id: uart_output
|
||||
# data: !lambda char buf[128];
|
||||
# sprintf(buf, "%s", id(battery_voltage).state);
|
||||
# std::string s = buf;
|
||||
# return std::vector<unsigned char>( s.begin(), s.end() );
|
||||
# - logger.log:
|
||||
# level: INFO
|
||||
# format: "time,%.1f,battery,%.1f,wifi,%.1f"
|
||||
# args: [ 'id(sntp_time).now()', 'id(battery_voltage).state', 'id(wifi_strength).state' ]
|
||||
Reference in New Issue
Block a user