esphome mi 1s lamp

2024-09-04 22:46:30 +12:00
parent 74d1c18615
commit 83549c6c1e
26 changed files with 2934 additions and 929 deletions
--- a/esphome/esp-midesklamp1s.yaml
+++ b/esphome/esp-midesklamp1s.yaml
@@ -0,0 +1,291 @@
+#############################################
+#############################################
+# Mi Smart LED Desk Lamp 1S
+# ESP32, LED Strip with variable white colour temp, rotary encoder
+# https://www.mi.com/global/product/mi-led-desk-lamp-1s/
+#############################################
+#############################################
+
+#############################################
+# SECRETS
+# Secrets file is usually at config/secrets.yaml
+# or config/esphome/secrets.yaml
+# depending on your setup with HA
+#############################################
+# SECRETS FILE needs these specific secrets:
+# esp-midesklamp1s_api_key
+# esp-midesklamp1s_ota_pass
+# esp-midesklamp1s_static_ip (Optional)
+# esp-midesklamp1s_gateway (Optional)
+# esp-midesklamp1s_subnet (Optional)
+#
+# SECRETS FILE needs these generic Secrets:
+# wifi_ssid
+# wifi_password
+# fallback_ap_password
+# mqtt_server
+# mqtt_username
+# mqtt_password
+# web_server_username (Optional)
+# web_server_password (Optional)
+#############################################
+
+#############################################
+# VARIABLE SUBSTITUTIONS
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  device_name: esp-midesklamp1s
+  friendly_name: "Mi 1S Lamp Office "
+  description_comment: "Office Desk Lamp with variable white colour temp and rotary encoder for brightness"
+
+  # if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-midesklamp1s_api_key # unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-midesklamp1s_ota_pass # unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+
+  # Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-midesklamp1s_static_ip
+  #static_ip_gateway: !secret esp-midesklamp1s_gateway
+  #static_ip_subnet: !secret esp-midesklamp1s_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" # main topic for the mqtt server, call it what you like
+
+  web_server_username: !secret web_server_username
+  web_server_password: !secret web_server_password
+
+  update_time: 60s # update time for for general temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name} # appears as main name on the esphome page in HA
+  comment: ${description_comment} # appears as comment on the esphome page in HA
+  #min_version: 2024.6.0
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: esp32doit-devkit-v1
+  framework:
+    type: esp-idf # Suggest using the ESP-IDF Framework. Changing from 'arduino' to 'esp-idf' needs a cabled flash to correct partitions
+    version: recommended # recommended, latest or dev
+
+    # these just for the esp32doit-devkit-v1 and Mi S Lamp 
+    sdkconfig_options:
+      CONFIG_FREERTOS_UNICORE: y
+    advanced:
+      ignore_efuse_mac_crc: true
+
+#############################################    
+# ESPHome Logging Enabl
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  # INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+  
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: ${device_name} fallback AP
+    password: ${fallback_ap_password}
+    ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+#web_server:
+#  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${device_name}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+#############################################
+# Time Component
+# https://esphome.io/components/time/index.html#time-component
+# Sync with HA Time.  Probably not really necessary.
+#############################################
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+#############################################
+# Text Sensors
+# https://esphome.io/components/text_sensor/index.html
+#############################################
+text_sensor:
+  - platform: version
+    name: ${friendly_name} Version
+  - platform: wifi_info
+    ip_address:
+      name: ${friendly_name} IP Address
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+  - platform: uptime      # Uptime for this device
+    name: ${friendly_name} Uptime
+    update_interval: ${update_time}  
+  - platform: wifi_signal # Wifi Strength
+    name: ${friendly_name} Wifi Signal
+    update_interval: ${update_time}  
+
+  # Mi Desk Lamp 1S Configuration
+  - platform: rotary_encoder
+    id: rotation
+    pin_a: GPIO27
+    pin_b: GPIO26
+    resolution: 2
+    on_value:
+      then:
+        - if:
+            condition:
+              # Check if Button is pressed while rotating
+              lambda: "return id(button).state;"
+            then:
+              # If Button is pressed, change CW/WW
+              - lambda: |-
+                  auto min_temp = id(light1).get_traits().get_min_mireds();
+                  auto max_temp = id(light1).get_traits().get_max_mireds();
+                  auto cur_temp = id(light1).current_values.get_color_temperature();
+                  auto new_temp = max(min_temp, min(max_temp, cur_temp + (x*10)));
+                  auto call = id(light1).turn_on();
+                  call.set_color_temperature(new_temp);
+                  call.perform();
+            else:
+              # If Button is not pressed, change brightness
+              - light.dim_relative:
+                  id: light1
+                  relative_brightness: !lambda |-
+                    return x / 25.0;
+        # Reset Rotation to 0
+        - sensor.rotary_encoder.set_value:
+            id: rotation
+            value: 0
+
+#############################################
+# Binary Sensors
+# https://esphome.io/components/binary_sensor/index.html
+#############################################
+binary_sensor:
+  - platform: gpio
+    id: button
+    pin:
+      number: GPIO33
+      inverted: True
+      mode: INPUT_PULLDOWN
+    on_click:
+      then:
+        - light.toggle:
+            id: light1
+            transition_length: 0.2s
+
+#############################################
+# Base Output Component
+# https://esphome.io/components/output/index.html#base-output-configuration
+#############################################
+output:
+  - platform: ledc    # Cool White LED PWM
+    pin: GPIO2
+    id: output_cw
+    frequency: 40000Hz
+    power_supply: power
+  - platform: ledc
+    pin: GPIO4        # Warm White LED PWM
+    id: output_ww
+    power_supply: power
+    frequency: 40000Hz
+
+#############################################
+# Power Supply Component
+# https://esphome.io/components/power_supply.html#power-supply-component
+#############################################
+power_supply:
+  - id: power
+    pin: GPIO12
+    enable_time: 0s
+    keep_on_time: 0s
+
+#############################################
+# Light Component
+# https://esphome.io/components/light/index.html#light-component
+#############################################
+light:
+  - platform: cwww # https://esphome.io/components/light/cwww.html#cold-white-warm-white-light
+    id: light1
+    default_transition_length: 0s
+    constant_brightness: true
+    name: "${friendly_name} Light"
+    cold_white: output_cw
+    warm_white: output_ww
+    cold_white_color_temperature: 4800 K
+    warm_white_color_temperature: 2500 K # 2500k is the original value of the lamp. To correct binning for 2700k to look more like 2700k use 2650k instead
+    restore_mode: ALWAYS_ON
+    gamma_correct: 0