esphome mi 1s lamp

automations.yaml

@@ -1,65 +1,3 @@
-- id: '1671746148141'
-  alias: Turn Off Xmas Decorations
-  description: ''
-  trigger:
-  - platform: state
-    entity_id:
-    - input_boolean.xmas_decorations
-    from: 'on'
-    to: 'off'
-  condition: []
-  action:
-  - type: turn_off
-    device_id: bbfa51e4e883fafa1d38824f11d83ba1
-    entity_id: switch.xmas_decoration_power_plug_zpp02
-    domain: switch
-  - type: turn_off
-    device_id: 506b3518661f7b2854e42ba5a26e0610
-    entity_id: switch.kogan_smarterhometm_smart_plug_new_socket_1
-    domain: switch
-  - type: turn_off
-    device_id: a9865914a7b7de1e81d1df47784282a8
-    entity_id: switch.tasmota_5
-    domain: switch
-  mode: single
-- id: '1671746242166'
-  alias: Turn On Xmas Decorations
-  description: ''
-  trigger:
-  - platform: state
-    entity_id:
-    - input_boolean.xmas_decorations
-    from: 'off'
-    to: 'on'
-  condition: []
-  action:
-  - type: turn_on
-    device_id: bbfa51e4e883fafa1d38824f11d83ba1
-    entity_id: switch.xmas_decoration_power_plug_zpp02
-    domain: switch
-  - type: turn_on
-    device_id: 506b3518661f7b2854e42ba5a26e0610
-    entity_id: switch.kogan_smarterhometm_smart_plug_new_socket_1
-    domain: switch
-  - type: turn_on
-    device_id: a9865914a7b7de1e81d1df47784282a8
-    entity_id: switch.tasmota_5
-    domain: switch
-  mode: single
-- id: '1682158655752'
-  description: ''
-  trigger:
-  - platform: state
-    entity_id:
-    - group.basement_lights
-    - group.foxhole_lights
-    to: 'ON'
-    from: 'OFF'
-  condition:
-  - condition: or
-    conditions: []
-  action: []
-  mode: single
 - id: '1693027703299'
   alias: Downstairs Kitchen turn ON LEDs on with main lights
   description: ''

configuration.yaml

@@ -24,14 +24,27 @@ conversation:
 
 logger:
   default: info
-  logs:
+#  logs:
-    custom_components.hacs: debug
+#custom_components.hacs: debug
-    custom_components.evnex: debug
+#custom_components.evnex: debug
-    evnex: debug
+#evnex: debug
 
 zha:
   enable_quirks: true
   custom_quirks_path: /config/custom_zha_quirks/
+  device_config: # https://community.home-assistant.io/t/turning-a-light-entity-to-switch-entity/589599/7
+    a4:c1:38:02:58:65:86:ed-1: # format: {ieee}-{endpoint_id}
+      type: “switch” # corrected device type
+    a4:c1:38:a1:db:1d:38:b7-1: # format: {ieee}-{endpoint_id}
+      type: “switch” # corrected device type
+  zigpy_config:
+    ota:
+      otau_directory: /config/zigpy_ota
+      ikea_provider: true
+      ledvance_provider: true
+      salus_provider: true
+      inovelli_provider: true
+      thirdreality_provider: true  
 
 device_tracker:
   - platform: bluetooth_le_tracker

esphome/esp-attobat.yaml

@@ -19,19 +19,36 @@ substitutions:
   description_comment: "Atto3 12V Battery Monitor (when home)"
   api_key: !secret esp-attobat_api_key #unfortunately you can't use substitutions in secrets names
   ota_pass: !secret esp-attobat_ota_pass #unfortunately you can't use substitutions in secrets names
-  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+  wifi_ssid: !secret wifi_ssid
-  update_time: 30s #update time for for temp sensors etc
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+
   #Add these if we are giving it a static ip, or remove them in the Wifi section
+  #A static IP will speed things up slightly in that it doesn't have to negotiate DHCP
   static_ip_address: !secret esp-attobat_static_ip
   static_ip_gateway: !secret esp-attobat_gateway
   static_ip_subnet: !secret esp-attobat_subnet
 
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+  mqtt_commandstopic: "viewroad-commands" #main topic for commands (ie sleep), call it what you like
+
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_time: 10s #update time for for general temp sensors etc
+
 #############################################
 # ESPHome
-#############################################  
+# https://esphome.io/components/esphome.html
+#############################################
 esphome:
-  name: $devicename
+  name: ${devicename}
+  friendly_name: ${friendly_name}
   comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0
 
 #############################################
 # ESP Platform and Framework
@@ -66,39 +83,49 @@ api:
 # https://esphome.io/components/ota.html?highlight=ota
 #############################################  
 ota:
-  safe_mode: true  #Safe mode will detect boot loops
+  - platform: esphome
-  password: ${ota_pass}
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
 
 #############################################    
 # Wifi Settings 
 # https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
 #############################################  
 wifi:
-  ssid: !secret wifi_ssid
+  ssid: ${wifi_ssid}
-  password: !secret wifi_password
+  password: ${wifi_password}
   #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
-  # Static IP (for lower power/quicker on time)
+  manual_ip: #optional static IP address
-  manual_ip:
     static_ip: ${static_ip_address}
     gateway: ${static_ip_gateway}
     subnet: ${static_ip_subnet}
   ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
     ssid: ${devicename} fallback AP
-    password: !secret fallback_ap_password
+    password: ${fallback_ap_password}
-    ap_timeout: 5min #default is 1min
+    ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
-captive_portal: # Fallback captive portal https://esphome.io/components/captive_portal.html
 
 #############################################    
 # Web Portal for display and monitoring
 #############################################   
 web_server:
   port: 80
-  version: 2
+  #version: 2
-  include_internal: true
+  #include_internal: true
-  ota: false
+  #ota: false
-  auth:
+  #auth:
-    username: !secret web_server_username
+    #username: ${web_server_username}
-    password: !secret web_server_password
+    #password: ${web_server_password}
     
 #############################################
 # MQTT Monitoring
@@ -106,29 +133,42 @@ web_server:
 # MUST also have api enabled if you enable MQTT
 #############################################
 mqtt:
-  broker: !secret mqtt_server
+  broker: ${mqtt_server}
   topic_prefix: ${mqtt_topic}/${devicename}
-  #username: !secret mqtt_username
+  username: ${mqtt_username}
-  #password: !secret mqtt_password
+  password: ${mqtt_password}
-  #
+  
   # Availability Topic
-  #birth_message:
+  birth_message:
-  #  topic: esphome/esp-leafbat2/availability
+    topic: ${mqtt_topic}/${devicename}/availability
-  #  payload: online
+    payload: online
-  #will_message:
+  will_message:
-  #  topic: esphome/esp-leafbat2/availability
+    topic: ${mqtt_topic}/${devicename}/availability
-  #  payload: offline
+    payload: offline
+
   # A way to prevent deep sleep using MQTT command
   on_message:
-    - topic: viewroad-commands/attobat/deepsleep
+    - topic: ${mqtt_commandstopic}/${devicename}/deepsleep
-      payload: 'OFF'
+      payload: "OFF"
       then:
         - deep_sleep.prevent: deep_sleep_1
-    - topic: viewroad-commands/attobat/deepsleep
+    - topic: ${mqtt_commandstopic}/${devicename}/deepsleep
-      payload: 'ON'
+      payload: "ON"
       then:
         - deep_sleep.enter: deep_sleep_1
 
+#    on_message:
+#    - topic: ${mqtt_commandstopic}/${devicename}/deepsleepon
+#      payload: 'ON'
+#      then:
+#        - deep_sleep.prevent: deep_sleep_1
+#    - topic: ${mqtt_commandstopic}/${devicename}/deepsleepoff
+#      payload: 'OFF'
+#      then:
+#        - deep_sleep.enter: deep_sleep_1
+
+
+
 ########################################    
 # Deep Sleep
 # https://esphome.io/components/deep_sleep.html
@@ -144,27 +184,32 @@ deep_sleep:
 #############################################
 #############################################  
 sensor:
-  # Quality of Wifi in dBm
+  #Quality of Wifi in dBm
   - platform: wifi_signal
     name: "WiFi Signal"
-    update_interval: 10s
+    update_interval: ${update_time}
-    retain: true
+    retain: true #Retain this as you'll have no value between sleeps otherwise
-  # Analog sensor for voltage reading (A0)
+  #Analog sensor for voltage reading (A0)
+  - platform: uptime
+    name: "Uptime"
+    update_interval: ${update_time}
+    retain: true #Retain this as you'll have no value between sleeps otherwise
   - platform: adc
     pin: A0
     name: "Battery Voltage"
-    update_interval: 10s
+    update_interval: ${update_time}
-    retain: true
+    retain: true #Retain this as you'll have no value between sleeps otherwise
     filters:
-      #- multiply: 18.52 # trial and error calc/measure
+      - multiply: 3.3 #D1 mini V divider, 3.3V -> 1V on esp8266
-      - calibrate_linear:
+      - calibrate_linear: #Read values with voltmeter and bench supply
-        - 0.41 -> 6.00
+        - 3.11 -> 14.00
-        - 0.48 -> 7.00
+        - 3.00 -> 13.50
-        - 0.54 -> 8.00
+        - 2.89 -> 13.00
-        - 0.61 -> 9.00
+        - 2.77 -> 12.50
-        - 0.68 -> 10.00
+        - 2.67 -> 12.00
-        - 0.75 -> 11.00
+        - 2.55 -> 11.50
-        - 0.81 -> 12.00
+        - 2.45 -> 11.00
-        - 0.88 -> 13.00
+        - 2.34 -> 10.50
-        - 0.94 -> 13.99
+        - 2.22 -> 10.00
-        - 0.99 -> 14.70
+        - 2.11 -> 09.50
+        - 2.00 -> 09.00

esphome/esp-btproxy1.yaml

@@ -1,131 +0,0 @@
-#############################################
-#############################################
-# 
-#############################################
-#############################################
-
-#############################################
-# Variable Substitutions
-#############################################
-substitutions:
-  devicename: "esp-btproxy1"
-  friendly_name: "BT Proxy 1"
-  description_comment: "D1 Mini ESP32 with BT Proxy Test"
-  api_key: !secret esp-btproxy1_api_key #unfortunately you can't use substitutions in secrets names
-  ota_pass: !secret esp-btproxy1_ota_pass #unfortunately you can't use substitutions in secrets names
-  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
-  update_time: 30s #update time for for temp sensors etc
-
-#############################################
-# ESPHome
-# https://esphome.io/components/esphome.html
-#############################################
-esphome:
-  name: ${devicename}
-  comment: ${description_comment} #appears on the esphome page in HA
-  #on_boot:    #Initial Setting, will remember previous values (if set)
-    #priority: -200
-    #then:
-
-
-#############################################
-# ESP Platform and Framework
-# https://esphome.io/components/esp32.html
-#############################################
-esp32:
-  board: esp32dev
-  framework:
-    #type: arduino
-    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
-    version: recommended #recommended, latest or dev
-
-#############################################    
-# ESPHome Logging Enable
-# https://esphome.io/components/logger.html
-############################################# 
-logger:
-  level: INFO  #INFO Level suggested, or DEBUG for testing
-  baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
-  #esp8266_store_log_strings_in_flash: false
-  #tx_buffer_size: 64
-
-#############################################    
-# Enable the Home Assistant API
-# https://esphome.io/components/api.html
-#############################################  
-api:
-  encryption:
-    key: ${api_key}
-
-#############################################    
-# Enable Over the Air Update Capability
-# https://esphome.io/components/ota.html?highlight=ota
-#############################################  
-ota:
-  safe_mode: true  #Safe mode will detect boot loops
-  password: ${ota_pass}
-
-#############################################    
-# Wifi Settings 
-# https://esphome.io/components/wifi.html
-#############################################  
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
-  #manual_ip: #optional static IP address
-    #static_ip: 192.168.x.x
-    #gateway: 192.168.X.x
-    #subnet: 255.255.255.0
-  ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
-    ssid: $devicename fallback AP
-    password: !secret fallback_ap_password
-    ap_timeout: 5min #default is 1min
-
-#############################################    
-# Web Portal for display and monitoring
-# Turning this off is probably a good idea to save resources.
-# https://esphome.io/components/web_server.html
-#############################################   
-web_server:
-  port: 80
-#   username: !secret web_server_username #probably a good idea to secure it
-#    password: !secret web_server_password
-
-#############################################
-# MQTT Monitoring
-# https://esphome.io/components/mqtt.html?highlight=mqtt
-# MUST also have api enabled if you enable MQTT
-#############################################
-mqtt:
-  broker: !secret mqtt_server
-  topic_prefix: ${mqtt_topic}/${devicename}
-  username: !secret mqtt_username
-  password: !secret mqtt_password
-
-#############################################    
-# Bluetooth
-# https://esphome.io/components/bluetooth_proxy.html
-# https://esphome.io/components/esp32_ble_tracker.html
-# Remember that this takes a LOT of processing. On the 
-# ESP32, enable the  IDF framework, and disable the 
-# Web server component.  Changing to the IDF framework 
-# needs to be via cable not OTA to change the
-# partition setup.
-#############################################  
-bluetooth_proxy:
-  active: true
-
-esp32_ble_tracker:
-
-#############################################
-# General esp status LED
-# https://esphome.io/components/status_led.html
-#############################################
-status_led:
-  pin:
-    number: GPIO2 #ESP32 Onboard LED
-    ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
-    inverted: false
-
-

esphome/esp-entbtproxy.yaml

@@ -0,0 +1,189 @@
+#############################################
+# Variable Substitutions
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  devicename: "esp-entbtproxy"
+  friendly_name: "Outside Entrance Bluetooth Proxy"
+  description_comment: "D1 Mini ESP32 outside entranceway with BT Proxy"
+
+  #if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-entbyproxy_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-entbtproxy_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+  #Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-entmulti_static_ip
+  #static_ip_gateway: !secret esp-entmulti_gateway
+  #static_ip_subnet: !secret esp-entmulti_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_time: 30s #update time for for general temp sensors etc
+
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0  #
+
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: esp32dev
+  framework:
+    #type: arduino
+    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
+    version: recommended #recommended, latest or dev
+
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+#  on_client_connected:
+#    - esp32_ble_tracker.start_scan:
+#       continuous: true
+#  on_client_disconnected:
+#    - esp32_ble_tracker.stop_scan:
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: $devicename fallback AP
+    password: !secret fallback_ap_password
+    ap_timeout: 5min #Time until it brings up fallback AP. default is 1min
+
+captive_portal:
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+#web_server:
+#  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+
+#############################################    
+# Bluetooth
+# https://esphome.io/components/bluetooth_proxy.html
+# https://esphome.io/components/esp32_ble_tracker.html
+# Remember that this takes a LOT of processing. On the 
+# ESP32, enable the  IDF framework, and disable the 
+# Web server component.  Changing to the IDF framework 
+# needs to be via cable not OTA to change the
+# partition setup.
+#############################################  
+bluetooth_proxy:
+  active: true
+
+esp32_ble_tracker:
+  scan_parameters:
+    # We currently use the defaults to ensure Bluetooth
+    # can co-exist with WiFi In the future we may be able to
+    # enable the built-in coexistence logic in ESP-IDF
+    active: true
+
+
+button:
+  - platform: safe_mode
+    id: button_safe_mode
+    name: Safe Mode Boot
+
+  - platform: factory_reset
+    id: factory_reset_btn
+    name: Factory reset
+
+
+sensor:
+  ################################
+  # WIFI SIGNAL
+  # Quality of Wifi in dBm
+  # https://esphome.io/components/sensor/wifi_signal.html
+  ################################
+  - platform: wifi_signal
+    name: ${friendly_name} WiFi Signal
+    update_interval: 20s
+    #retain: true #retain useful if sleeping
+
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    update_interval: 10s
+
+
+
+

esphome/esp-entmulti copy.yaml.old

@@ -0,0 +1,488 @@
+#############################################
+#############################################
+# 
+#
+#############################################
+#############################################
+
+#############################################
+# Variable Substitutions
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  devicename: "esp-entmulti"
+  friendly_name: "Outside Entrance Multisensor"
+  description_comment: "D1 Mini ESP32 outside entranceway with, mmWave presence, PIR and more"
+
+  #if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-entmulti_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-entmulti_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+  #Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-entmulti_static_ip
+  #static_ip_gateway: !secret esp-entmulti_gateway
+  #static_ip_subnet: !secret esp-entmulti_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_time: 30s #update time for for general temp sensors etc
+
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0
+
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: esp32dev
+  framework:
+    #type: arduino
+    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
+    version: recommended #recommended, latest or dev
+
+#############################################    
+# ESPHome external or custom components to use
+# https://esphome.io/components/external_components.html
+# https://github.com/ssieb/esphome_components/tree/master/components/serial
+############################################# 
+#external_components:
+#  - source:
+#      type: git
+#      url: https://github.com/ssieb/custom_components #Thanks for @ssieb components.
+#    components: [ serial ]  #text_sensor that reads lines for a uart. Also, a sensor that reads single binary values from the uart.
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+#  on_client_connected:
+#    - esp32_ble_tracker.start_scan:
+#       continuous: true
+#  on_client_disconnected:
+#    - esp32_ble_tracker.stop_scan:
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: $devicename fallback AP
+    password: !secret fallback_ap_password
+    ap_timeout: 5min #Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+#web_server:
+#  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+#############################################
+# i2c bus
+# https://esphome.io/components/i2c.html
+# 10, 50, 100, 200, 800 are possible settings
+# for frequency, 50kHz is default
+#############################################
+#i2c:
+#  sda: GPIO19
+#  scl: GPIO21
+#  scan: True #look for devices on boot up and report
+  #frequency: 100kHz
+
+#############################################
+# UART Serial
+# hardware on EPS32, but software, and can be glitchy on ESP8266
+# https://esphome.io/components/uart.html
+#############################################
+uart:
+  id: ld2410_uart
+  rx_pin: GPIO16  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
+  tx_pin: GPIO17  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
+  baud_rate: 256000 # default for LD2410 is 25600, 8, 0, NONE
+  data_bits: 8
+  stop_bits: 1
+  parity: NONE
+
+#############################################    
+# Bluetooth
+# https://esphome.io/components/bluetooth_proxy.html
+# https://esphome.io/components/esp32_ble_tracker.html
+# Remember that this takes a LOT of processing. On the 
+# ESP32, enable the  IDF framework, and disable the 
+# Web server component.  Changing to the IDF framework 
+# needs to be via cable not OTA to change the
+# partition setup.
+#############################################  
+#bluetooth_proxy:
+#  active: true
+#  cache_services: true
+#
+#esp32_ble_tracker:
+#  scan_parameters:
+#    active: true
+#      continuous: false
+
+#############################################
+# Global Variables for use in automations etc
+# https://esphome.io/guides/automations.html?highlight=globals#global-variables
+#############################################
+
+
+#############################################
+# General esp status LED
+# https://esphome.io/components/status_led.html
+#############################################
+status_led:
+  pin:
+    number: GPIO2 #ESP32 Onboard LED
+    ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
+    inverted: false
+
+#############################################
+# Interval Automations 
+# https://esphome.io/guides/automations.html       
+#############################################
+
+#############################################
+# LD2410 Sensors
+# https://esphome.io/components/sensor/ld2410.html
+# https://www.hlktech.net/index.php?id=988
+#############################################
+ld2410:
+  uart_id: ld2410_uart
+
+#############################################
+# Number Sensors (custom component)        
+# refer https://github.com/ssieb/esphome_components/tree/master/components/serial
+#############################################
+number:
+  - platform: ld2410
+    timeout:
+      name: Timeout
+    light_threshold:
+      name: Light Threshold
+    max_move_distance_gate:
+      name: Max Move Distance Gate
+    max_still_distance_gate:
+      name: Max Still Distance Gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+#The ld2410 select allows you to control your LD2410 Sensor.
+#distance_resolution (Optional): Control the gates distance resolution. Can be 0.75m or 0.2m. Defaults to 0.75m. All options from Select.
+#baud_rate (Optional): Control the serial port baud rate. Defaults to 256000. Once changed, all sensors will stop working until a fresh install with an updated UART Component configuration. All options from Select.
+#light_function (Optional): If set, will affect the OUT pin value, based on light threshold. Can be off, low or above. Defaults to off. All options from Select.
+#out_pin_level (Optional): Control OUT pin away value. Can be low or high. Defaults to low. All options from Select.
+#ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
+select:
+  - platform: ld2410
+    distance_resolution: 
+      name: ${friendly_name} LD2140 Distance Resolution
+    baud_rate:
+      name: ${friendly_name} LD2140 Baud Rate
+    light_function:
+      name: ${friendly_name} LD2140 Light Function
+    out_pin_level:
+      name: ${friendly_name} LD2140 Out Pin Level
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+#  - platform: bme280_i2c
+#    address: 0x76
+#    update_interval: ${update_time}   
+#    temperature:
+#      name: ${friendly_name} BME280 Temp
+#      accuracy_decimals: 1     
+#      oversampling: 2x
+#    pressure:
+#      name: ${friendly_name} BME280 Pressure
+#      oversampling: 2x
+#    humidity:
+#      name: ${friendly_name} BME280 Humidity
+#      accuracy_decimals: 1     
+#      oversampling: 2x
+
+  ################################
+  # WIFI SIGNAL
+  # Quality of Wifi in dBm
+  # https://esphome.io/components/sensor/wifi_signal.html
+  ################################
+  - platform: wifi_signal
+    name: ${friendly_name} WiFi Signal
+    update_interval: 20s
+    #retain: true #retain useful if sleeping
+
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    update_interval: 20s
+
+
+#The ld2410 sensor values
+  - platform: ld2410
+    light:
+      name: Light
+    moving_distance:
+      name : Moving Distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Detection Distance
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+# The ld2410 switch allows you to control your LD2410 Sensor.
+#Bluetooth switch is only useful of you have a B or C model
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: ${friendly_name} LD2140 Engineering Mode
+    #bluetooth:
+      #name: ${friendly_name} LD2140 Control Bluetooth
+
+
+#The ld2410 button allows resetting
+#button:
+#  - platform: ld2410
+#    factory_reset:
+#      name: ${friendly_name} LD2140 Factory reset"
+#    restart:
+#      name: ${friendly_name} LD2140 Restart
+##    query_params:
+#      name: Query Parameters
+
+#############################################
+# Text Sensors
+# refer https://esphome.io/components/text_sensor/index.html
+#############################################
+#The ld2410 text sensor allows you to get information about your LD2410 Sensor.
+#Bluetooth sensor is only useful of you have a B or C model
+#text_sensor:
+#  - platform: ld2410
+#    version:
+#      name: ${friendly_name} LD2140 Firmware Version
+    #mac_address:
+      #name: ${friendly_name} LD2140 BT MAC Address
+
+
+#############################################
+# Binary Sensors
+# https://esphome.io/components/binary_sensor/index.html
+#############################################
+binary_sensor:
+
+  - platform: ld2410
+    has_target:
+      name: ${friendly_name} Presence
+    has_moving_target:
+      name: ${friendly_name} Moving Target
+    has_still_target:
+      name: ${friendly_name} Still Target
+    out_pin_presence_status:
+      name: ${friendly_name} LD2140 Out Pin Presence Status
+
+  #Standard PIR Sensor
+  - platform: gpio
+    pin:
+      number: GPIO13
+      mode:
+        input: True
+        pullup: False
+      inverted: True
+    filters: 
+      - delayed_on: 50ms
+    name: ${friendly_name} PIR Sensor
+    device_class: motion
+
+  #RF Input from Vibration Sensor (Green Bin)
+  - platform: gpio
+    pin:
+      number: GPIO04
+      mode:
+        input: true
+        pullup: true
+      inverted: True
+    filters:
+      - delayed_on: 20ms
+    name: ${friendly_name} Green Bin motion
+    device_class: vibration
+
+  #RF Input from Vibration Sensor (Red Bin)
+  - platform: gpio
+    pin:
+      number: GPIO15
+      mode:
+        input: true
+        pullup: true
+      inverted: True
+    filters:
+      - delayed_on: 20ms
+    name: ${friendly_name} Red Bin motion
+    device_class: vibration

esphome/esp-entmulti.yaml

@@ -0,0 +1,488 @@
+#############################################
+#############################################
+# 
+#
+#############################################
+#############################################
+
+#############################################
+# Variable Substitutions
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  devicename: "esp-entmulti"
+  friendly_name: "Outside Entrance Multisensor"
+  description_comment: "D1 Mini ESP32 outside entranceway with, mmWave presence, PIR and more"
+
+  #if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-entmulti_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-entmulti_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+  #Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-entmulti_static_ip
+  #static_ip_gateway: !secret esp-entmulti_gateway
+  #static_ip_subnet: !secret esp-entmulti_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_time: 30s #update time for for general temp sensors etc
+
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0
+
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: esp32dev
+  framework:
+    #type: arduino
+    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
+    version: recommended #recommended, latest or dev
+
+#############################################    
+# ESPHome external or custom components to use
+# https://esphome.io/components/external_components.html
+# https://github.com/ssieb/esphome_components/tree/master/components/serial
+############################################# 
+#external_components:
+#  - source:
+#      type: git
+#      url: https://github.com/ssieb/custom_components #Thanks for @ssieb components.
+#    components: [ serial ]  #text_sensor that reads lines for a uart. Also, a sensor that reads single binary values from the uart.
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+#  on_client_connected:
+#    - esp32_ble_tracker.start_scan:
+#       continuous: true
+#  on_client_disconnected:
+#    - esp32_ble_tracker.stop_scan:
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: $devicename fallback AP
+    password: !secret fallback_ap_password
+    ap_timeout: 5min #Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+#web_server:
+#  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+#############################################
+# i2c bus
+# https://esphome.io/components/i2c.html
+# 10, 50, 100, 200, 800 are possible settings
+# for frequency, 50kHz is default
+#############################################
+#i2c:
+#  sda: GPIO19
+#  scl: GPIO21
+#  scan: True #look for devices on boot up and report
+  #frequency: 100kHz
+
+#############################################
+# UART Serial
+# hardware on EPS32, but software, and can be glitchy on ESP8266
+# https://esphome.io/components/uart.html
+#############################################
+#uart:
+#  id: ld2410_uart
+#  rx_pin: GPIO16  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
+#  tx_pin: GPIO17  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
+#  baud_rate: 256000 # default for LD2410 is 25600, 8, 0, NONE
+#  data_bits: 8
+#  stop_bits: 1
+#  parity: NONE
+
+#############################################    
+# Bluetooth
+# https://esphome.io/components/bluetooth_proxy.html
+# https://esphome.io/components/esp32_ble_tracker.html
+# Remember that this takes a LOT of processing. On the 
+# ESP32, enable the  IDF framework, and disable the 
+# Web server component.  Changing to the IDF framework 
+# needs to be via cable not OTA to change the
+# partition setup.
+#############################################  
+#bluetooth_proxy:
+#  active: true
+#  cache_services: true
+#
+#esp32_ble_tracker:
+#  scan_parameters:
+#    active: true
+#      continuous: false
+
+#############################################
+# Global Variables for use in automations etc
+# https://esphome.io/guides/automations.html?highlight=globals#global-variables
+#############################################
+
+
+#############################################
+# General esp status LED
+# https://esphome.io/components/status_led.html
+#############################################
+status_led:
+  pin:
+    number: GPIO2 #ESP32 Onboard LED
+    ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
+    inverted: false
+
+#############################################
+# Interval Automations 
+# https://esphome.io/guides/automations.html       
+#############################################
+
+#############################################
+# LD2410 Sensors
+# https://esphome.io/components/sensor/ld2410.html
+# https://www.hlktech.net/index.php?id=988
+#############################################
+#ld2410:
+#  uart_id: ld2410_uart
+
+#############################################
+# Number Sensors (custom component)        
+# refer https://github.com/ssieb/esphome_components/tree/master/components/serial
+#############################################
+#number:
+#  - platform: ld2410
+#    timeout:
+#      name: Timeout
+#    light_threshold:
+#      name: Light Threshold
+#    max_move_distance_gate:
+#      name: Max Move Distance Gate
+#    max_still_distance_gate:
+#      name: Max Still Distance Gate
+#    g0:
+#      move_threshold:
+#        name: g0 move threshold
+#      still_threshold:
+#        name: g0 still threshold
+#    g1:
+#      move_threshold:
+#        name: g1 move threshold
+#      still_threshold:
+#        name: g1 still threshold
+#    g2:
+#      move_threshold:
+#        name: g2 move threshold
+#      still_threshold:
+#        name: g2 still threshold
+#    g3:
+#      move_threshold:
+#        name: g3 move threshold
+#      still_threshold:
+#        name: g3 still threshold
+#    g4:
+#      move_threshold:
+#        name: g4 move threshold
+#      still_threshold:
+#        name: g4 still threshold
+#    g5:
+#      move_threshold:
+#        name: g5 move threshold
+#      still_threshold:
+#        name: g5 still threshold
+#    g6:
+#      move_threshold:
+#        name: g6 move threshold
+#      still_threshold:
+#        name: g6 still threshold
+#    g7:
+#      move_threshold:
+#        name: g7 move threshold
+#      still_threshold:
+#        name: g7 still threshold
+#    g8:
+#      move_threshold:
+#        name: g8 move threshold
+#      still_threshold:
+#        name: g8 still threshold
+
+#The ld2410 select allows you to control your LD2410 Sensor.
+#distance_resolution (Optional): Control the gates distance resolution. Can be 0.75m or 0.2m. Defaults to 0.75m. All options from Select.
+#baud_rate (Optional): Control the serial port baud rate. Defaults to 256000. Once changed, all sensors will stop working until a fresh install with an updated UART Component configuration. All options from Select.
+#light_function (Optional): If set, will affect the OUT pin value, based on light threshold. Can be off, low or above. Defaults to off. All options from Select.
+#out_pin_level (Optional): Control OUT pin away value. Can be low or high. Defaults to low. All options from Select.
+#ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
+#select:
+#  - platform: ld2410
+#    distance_resolution: 
+#      name: ${friendly_name} LD2140 Distance Resolution
+#    baud_rate:
+#      name: ${friendly_name} LD2140 Baud Rate
+#    light_function:
+#      name: ${friendly_name} LD2140 Light Function
+#    out_pin_level:
+#      name: ${friendly_name} LD2140 Out Pin Level
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+#  - platform: bme280_i2c
+#    address: 0x76
+#    update_interval: ${update_time}   
+#    temperature:
+#      name: ${friendly_name} BME280 Temp
+#      accuracy_decimals: 1     
+#      oversampling: 2x
+#    pressure:
+#      name: ${friendly_name} BME280 Pressure
+#      oversampling: 2x
+#    humidity:
+#      name: ${friendly_name} BME280 Humidity
+#      accuracy_decimals: 1     
+#      oversampling: 2x
+
+  ################################
+  # WIFI SIGNAL
+  # Quality of Wifi in dBm
+  # https://esphome.io/components/sensor/wifi_signal.html
+  ################################
+  - platform: wifi_signal
+    name: ${friendly_name} WiFi Signal
+    update_interval: 20s
+    #retain: true #retain useful if sleeping
+
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    update_interval: 20s
+
+
+#The ld2410 sensor values
+#  - platform: ld2410
+#    light:
+#      name: Light
+#    moving_distance:
+#      name : Moving Distance
+#    still_distance:
+#      name: Still Distance
+#    moving_energy:
+#      name: Move Energy
+#    still_energy:
+#      name: Still Energy
+#    detection_distance:
+#      name: Detection Distance
+#    g0:
+#      move_energy:
+#        name: g0 move energy
+#      still_energy:
+#        name: g0 still energy
+#    g1:
+#      move_energy:
+#        name: g1 move energy
+#      still_energy:
+#        name: g1 still energy
+#    g2:
+#      move_energy:
+#        name: g2 move energy
+#      still_energy:
+#        name: g2 still energy
+#    g3:
+#      move_energy:
+#        name: g3 move energy
+#      still_energy:
+#        name: g3 still energy
+#    g4:
+#      move_energy:
+#        name: g4 move energy
+#      still_energy:
+#        name: g4 still energy
+#    g5:
+#      move_energy:
+#        name: g5 move energy
+#      still_energy:
+#        name: g5 still energy
+#    g6:
+#      move_energy:
+#        name: g6 move energy
+#      still_energy:
+#        name: g6 still energy
+#    g7:
+#      move_energy:
+#        name: g7 move energy
+#      still_energy:
+#        name: g7 still energy
+#    g8:
+#      move_energy:
+#        name: g8 move energy
+#      still_energy:
+#        name: g8 still energy
+
+# The ld2410 switch allows you to control your LD2410 Sensor.
+#Bluetooth switch is only useful of you have a B or C model
+#switch:
+#  - platform: ld2410
+#    engineering_mode:
+#      name: ${friendly_name} LD2140 Engineering Mode
+    #bluetooth:
+      #name: ${friendly_name} LD2140 Control Bluetooth
+
+
+#The ld2410 button allows resetting
+#button:
+#  - platform: ld2410
+#    factory_reset:
+#      name: ${friendly_name} LD2140 Factory reset"
+#    restart:
+#      name: ${friendly_name} LD2140 Restart
+##    query_params:
+#      name: Query Parameters
+
+#############################################
+# Text Sensors
+# refer https://esphome.io/components/text_sensor/index.html
+#############################################
+#The ld2410 text sensor allows you to get information about your LD2410 Sensor.
+#Bluetooth sensor is only useful of you have a B or C model
+#text_sensor:
+#  - platform: ld2410
+#    version:
+#      name: ${friendly_name} LD2140 Firmware Version
+    #mac_address:
+      #name: ${friendly_name} LD2140 BT MAC Address
+
+
+#############################################
+# Binary Sensors
+# https://esphome.io/components/binary_sensor/index.html
+#############################################
+binary_sensor:
+
+#  - platform: ld2410
+#    has_target:
+#      name: ${friendly_name} Presence
+#    has_moving_target:
+#      name: ${friendly_name} Moving Target
+#    has_still_target:
+#      name: ${friendly_name} Still Target
+#    out_pin_presence_status:
+#      name: ${friendly_name} LD2140 Out Pin Presence Status
+
+  #Standard PIR Sensor
+  - platform: gpio
+    pin:
+      number: GPIO13
+      mode:
+        input: True
+        pullup: True
+      inverted: True
+    filters: 
+      - delayed_on: 200ms
+    name: ${friendly_name} PIR Sensor
+    device_class: motion
+
+  #RF Input from Vibration Sensor (Green Bin)
+  - platform: gpio
+    pin:
+      number: GPIO04
+      mode:
+        input: true
+        pullup: true
+      inverted: True
+    filters:
+      - delayed_on: 20ms
+    name: ${friendly_name} Green Bin motion
+    device_class: vibration
+
+  #RF Input from Vibration Sensor (Red Bin)
+  - platform: gpio
+    pin:
+      number: GPIO15
+      mode:
+        input: true
+        pullup: true
+      inverted: True
+    filters:
+      - delayed_on: 20ms
+    name: ${friendly_name} Red Bin motion
+    device_class: vibration

esphome/esp-generic-startfile.yaml

@@ -0,0 +1,205 @@
+
+# This is a generic starter yaml file for
+# espHome, by zorruno 2024
+# <DEVICENAME> would be something like loungefancontroller
+# yaml file would then be esp-loungefancontroller.yaml
+
+#############################################
+#############################################
+# TITLE
+# Details of what the device is plus
+# any relevant web links
+#############################################
+#############################################
+
+#############################################
+# SECRETS
+# Secrets file is usually at config/secrets.yaml
+# or config/esphome/secrets.yaml
+# depending on your setup with HA
+#############################################
+# SECRETS FILE needs these specific secrets:
+# esp-<DEVICENAME>_api_key
+# esp-<DEVICENAME>_ota_pass
+# esp-<DEVICENAME>_static_ip (Optional)
+# esp-<DEVICENAME>_gateway (Optional)
+# esp-<DEVICENAME>_subnet (Optional)
+#
+# SECRETS FILE needs these generic Secrets:
+# wifi_ssid
+# wifi_password
+# fallback_ap_password
+# mqtt_server
+# mqtt_username
+# mqtt_password
+# web_server_username (Optional)
+# web_server_password (Optional)
+#############################################
+
+#############################################
+# VARIABLE SUBSTITUTIONS
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  device_name: esp-<DEVICENAME>
+  friendly_name: "Device friendly name"
+  description_comment: "A Description of this device"
+
+  # if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-<DEVICENAME>_api_key # unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-<DEVICENAME>_ota_pass # unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+
+  # Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-<DEVICENAME>_static_ip
+  #static_ip_gateway: !secret esp-<DEVICENAME>_gateway
+  #static_ip_subnet: !secret esp-<DEVICENAME>_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" # main topic for the mqtt server, call it what you like
+
+  web_server_username: !secret web_server_username
+  web_server_password: !secret web_server_password
+
+  update_time: 60s # update time for for general temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name} # appears as main name on the esphome page in HA
+  comment: ${description_comment} # appears as comment on the esphome page in HA
+  #min_version: 2024.6.0
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: <ESP-DEVICE>
+  framework:
+    type: esp-idf # Suggest using the ESP-IDF Framework. Changing from 'arduino' to 'esp-idf' needs a cabled flash to correct partitions
+    version: recommended # recommended, latest or dev
+
+#############################################    
+# ESPHome Logging Enabl
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  # INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+  
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: ${device_name} fallback AP
+    password: ${fallback_ap_password}
+    ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+#web_server:
+#  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${device_name}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+#############################################
+# Time Component
+# https://esphome.io/components/time/index.html#time-component
+# Sync with HA Time.  Probably not really necessary.
+#############################################
+#time:
+#  - platform: homeassistant
+#    id: homeassistant_time
+
+#############################################
+# Text Sensors
+# https://esphome.io/components/text_sensor/index.html
+#############################################
+text_sensor:
+  - platform: version
+    name: ${friendly_name} Version
+  - platform: wifi_info
+    ip_address:
+      name: ${friendly_name} IP Address
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+  - platform: uptime      # Uptime for this device
+    name: ${friendly_name} Uptime
+    update_interval: ${update_time}  
+  - platform: wifi_signal # Wifi Strength
+    name: ${friendly_name} Wifi Signal
+    update_interval: ${update_time}  
+
+  #############################################
+# Binary Sensors
+# https://esphome.io/components/binary_sensor/index.html
+#############################################
+#binary_sensor:
+

esphome/esp-leafbat.yaml

@@ -0,0 +1,247 @@
+#############################################
+#############################################
+# BYD ATTO3 12V Battery Monitor 
+# Monitoring the status of a vehicle 12V battery with 
+# an esp8266 (D1 Mini).  It will obviously only
+# transmit when the vehicle is within wifi range. 
+# Voltage is measured with a resistor voltage divider
+# into the analogue GPIO on the esp8266.
+# https://zorruno.com/2022/vehicle-12v-battery-monitoring/
+##############################################
+#############################################
+
+#############################################
+# Variable Substitutions
+#############################################
+substitutions:
+  devicename: "esp-leafbat"
+  friendly_name: "Nissan Leaf 12V Battery Monitor"
+  description_comment: "Nissan Leaf 12V Battery Monitor (when home)"
+  api_key: !secret esp-leafbat_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-leafbat_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+
+  #Add these if we are giving it a static ip, or remove them in the Wifi section
+  #A static IP will speed things up slightly in that it doesn't have to negotiate DHCP
+  static_ip_address: !secret esp-leafbat_static_ip
+  static_ip_gateway: !secret esp-leafbat_gateway
+  static_ip_subnet: !secret esp-leafbat_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+  mqtt_commandstopic: "viewroad-commands" #main topic for commands (ie sleep), call it what you like
+
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_time: 10s #update time for for general temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_name}
+  comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp8266.html
+# https://esphome.io/components/esp32.html
+############################################# 
+esp8266:
+  board: d1_mini
+  framework:
+    version: latest #recommended, latest or dev
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#uart:
+#  id: uart_output
+#  tx_pin: GPIO12
+#  rx_pin: GPIO13
+#  baud_rate: 9600
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  manual_ip: #optional static IP address
+    static_ip: ${static_ip_address}
+    gateway: ${static_ip_gateway}
+    subnet: ${static_ip_subnet}
+  ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: ${devicename} fallback AP
+    password: ${fallback_ap_password}
+    ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+#############################################   
+web_server:
+  port: 80
+  #version: 2
+  #include_internal: true
+  #ota: false
+  #auth:
+    #username: ${web_server_username}
+    #password: ${web_server_password}
+    
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+  
+  # Availability Topic
+  birth_message:
+    topic: ${mqtt_topic}/${devicename}/availability
+    payload: online
+  will_message:
+    topic: ${mqtt_topic}/${devicename}/availability
+    payload: offline
+
+  # A way to prevent deep sleep using MQTT command
+  on_message:
+    - topic: ${mqtt_commandstopic}/${devicename}/deepsleep
+      payload: 'OFF'
+      then:
+        - deep_sleep.prevent: deep_sleep_1
+    - topic: ${mqtt_commandstopic}/${devicename}/deepsleep
+      payload: 'ON'
+      then:
+        - deep_sleep.enter: deep_sleep_1
+
+########################################    
+# Deep Sleep
+# https://esphome.io/components/deep_sleep.html
+########################################   
+deep_sleep:
+  run_duration: 20s
+  sleep_duration: 5min
+  id: deep_sleep_1
+
+#time:
+#  - platform: homeassistant
+#    id: ha_time
+#    timezone: Pacific/Auckland
+
+#text_sensor:
+#  - platform: template
+#    name: "Current time"
+#    id: current_time
+#    lambda: return id(ha_time).now().strftime("%H%M");
+#    lambda: |-
+#      char str[17];
+ #     time_t currTime = id(ha_time).now().timestamp;
+ #     strftime(str, sizeof(str), "%Y-%m-%d %H:%M", localtime(&currTime));
+ #     return  { str };
+#    update_interval: ${update_time}
+
+#############################################  
+#############################################
+# MAIN SENSORS
+#############################################
+#############################################  
+sensor:
+  #Quality of Wifi in dBm
+  - platform: wifi_signal
+    name: "WiFi Signal"
+    id: wifi_strength
+    update_interval: ${update_time}
+    retain: true #Retain this as you'll have no value between sleeps otherwise
+  #Analog sensor for voltage reading (A0)
+  - platform: uptime
+    name: "Uptime"
+    update_interval: ${update_time}
+    retain: true #Retain this as you'll have no value between sleeps otherwise
+  - platform: adc
+    pin: A0
+    name: "Battery Voltage"
+    id: battery_voltage
+    #mqtt_id: battery_voltage
+    update_interval: ${update_time}
+    retain: true #Retain this as you'll have no value between sleeps otherwise
+    # This set used a voltage divider with a 100k and a 4.7k R value
+    filters:
+      - multiply: 3.3 #D1 mini V divider, 3.3V -> 1V on esp8266
+      - calibrate_linear: #Read values with voltmeter and bench supply
+        - 0.72 -> 16.00
+        - 0.68 -> 15.00
+        - 0.63 -> 14.00
+        - 0.59 -> 13.00
+        - 0.55 -> 12.00
+        - 0.51 -> 11.00
+        - 0.45 -> 10.00
+        - 0.40 -> 09.00
+        - 0.36 -> 08.00
+        - 0.32 -> 07.00
+        - 0.28 -> 06.00
+        - 0.23 -> 05.00
+#    on_value: 
+#      - logger.log:
+#          level: INFO
+#          format: "time,%s,battery,%.1f,wifi,%.1f"
+#          args: [ 'id(ha_time).now()', 'id(battery_voltage).state', 'id(wifi_strength).state' ]
+
+#      - uart.write:
+#          id: uart_output
+#          data: !lambda  char buf[128];
+#                       sprintf(buf, "%s", id(battery_voltage).state);
+#                       std::string s = buf;
+#                       return std::vector<unsigned char>( s.begin(), s.end() );
+#      - logger.log:
+#          level: INFO
+#          format: "time,%.1f,battery,%.1f,wifi,%.1f"
+#          args: [ 'id(sntp_time).now()', 'id(battery_voltage).state', 'id(wifi_strength).state' ]

esphome/esp-leafbat2.yaml

@@ -1,177 +0,0 @@
-#############################################
-#############################################
-# Nissan Leaf 12V Battery Monitor 
-# Monitoring the status of a vehicle 12V battery with 
-# an esp8266 (D1 Mini).  It will obviously only
-# transmit when the vehicle is within wifi range. 
-# Voltage is measured with a resistor voltage divider
-# into the analogue GPIO on the esp8266.
-# https://zorruno.com/2022/vehicle-12v-battery-monitoring/
-##############################################
-# zorruno 2022-09-31 V1 Untested
-# zorruno 2024-06-02 V2 YAML Tidyups
-#############################################
-#############################################
-
-#############################################
-# Variable Substitutions
-# Give this a useful name & description here
-# and change values accordingly
-#############################################
-substitutions:
-  devicename: "esp-leafbat2"
-  friendly_name: "Nissan Leaf 12V Battery Monitor"
-  description_comment: "Nissan Leaf 12V Battery Monitor (when home)"
-
-  #if NOT using a secrets file, just replace these with the passwords etc in speech marks
-  api_key: !secret esp-leafbat_api_key #unfortunately you can't use substitutions in secrets names
-  ota_pass: !secret esp-leafbat_ota_pass #unfortunately you can't use substitutions in secrets names
-  #update_time: 30s #update time for for temp sensors etc
-
-  wifi_ssid: !secret wifi_ssid
-  wifi_pass: !secret wifi_password
-  #Add these if we are giving it a static ip, or remove them in the Wifi section
-  static_ip_address: !secret esp-leafbat_static_ip
-  static_ip_gateway: !secret esp-leafbat_gateway
-  static_ip_subnet: !secret esp-leafbat_subnet
-
-  mqtt_server: !secret mqtt_server
-  mqtt_username: !secret mqtt_username
-  mqtt_password: !secret mqtt_password
-  mqtt_topic: "esphome/esp-leafbat2" #main topic for the mqtt server, call it what you like
-
-  web_server_username: !secret web_server_username
-  web_server_password:  !secret web_server_password
-
-  fallback_ap_ssid: "Esp-Leafbat2 Fallback Hotspot"
-  fallback_ap_password: !secret fallback_ap_password
-
-
-
-
-#############################################
-# ESPHome
-#############################################  
-esphome:
-  name: ${devicename}
-  comment: ${description_comment} #appears on the esphome page in HA
-
-########################################    
-# Specific board for ESPHome device
-########################################    
-esp8266:
-  board: d1_mini
-
-#############################################    
-# ESPHome Logging Enable
-#############################################  
-logger:
-
-########################################    
-# Enable the Home Assistant API
-########################################  
-api:
-  encryption:
-    key: ${api_key}
-
-########################################    
-# Enable Over the Air Update Capability
-# Safe mode will detect boot loops
-########################################  
-ota:
-  safe_mode: true
-  password: ${ota_pass}
-
-########################################    
-# Use Wifi 
-# (credentials are in secrets file)
-########################################  
-wifi:
-  ssid: ${wifi_ssid}
-  password: ${wifi_password}
-  # Details for fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: ${fallback_ap_ssid}
-    password: ${fallback_ap_password}
-  # Static IP (for lower power/quicker on time)
-  manual_ip:
-    static_ip: ${static_ip_address}
-    gateway: ${static_ip_gateway}
-    subnet: ${static_ip_subnet}
-
-#############################################    
-# Fallback captive portal
-#############################################   
-captive_portal:
-
-########################################    
-# Web Portal for display and monitoring
-########################################   
-web_server:
-  port: 80
-  auth:
-    username: ${web_server_username}
-    password: ${web_server_password}
-    
-########################################    
-# MQTT Monitoring
-########################################   
-mqtt:
-  broker: ${mqtt_server}
-  topic_prefix: ${mqtt_topic}
-  username: ${mqtt_username}
-  password: ${mqtt_password}
-  #
-  # Availability Topic
-  #birth_message:
-  #  topic: esphome/esp-leafbat2/availability
-  #  payload: online
-  #will_message:
-  #  topic: esphome/esp-leafbat2/availability
-  #  payload: offline
-  # A way to prevent deep sleep using MQTT command
-  on_message:
-    - topic: viewroad-commands/leafbat2/deepsleep
-      payload: 'ON'
-      then:
-        - deep_sleep.prevent: deep_sleep_1
-    - topic: viewroad-commands/leafbat2/deepsleep
-      payload: 'ON'
-      then:
-        - deep_sleep.enter: deep_sleep_1
-
-########################################    
-# Deep Sleep
-########################################   
-deep_sleep:
-  run_duration: 20s
-  sleep_duration: 10min
-  id: deep_sleep_1
-  
-#############################################  
-#############################################
-# MAIN SENSORS
-#############################################
-#############################################  
-sensor:
-  # Quality of Wifi in dBm
-  - platform: wifi_signal
-    name: "WiFi Signal"
-    update_interval: 10s
-    retain: true
-  # Analog sensor for voltage reading (A0)
-  - platform: adc
-    pin: A0
-    name: "Battery Voltage"
-    update_interval: 10s
-    retain: true
-    filters:
-      - multiply: 18.52 # trial and error calc/measure
-      - calibrate_linear:
-        - 5.99 -> 6.0
-        - 11.98 -> 11.99
-        - 16.98 -> 16.98
-
-#name: "Battery Voltage"
-# Optional variables:
-#retain: true

esphome/esp-mainovenmonitor.yaml

@@ -69,8 +69,15 @@ api:
 # https://esphome.io/components/ota.html?highlight=ota
 #############################################  
 ota:
-  safe_mode: true  #Safe mode will detect boot loops
+  - platform: esphome
-  password: ${ota_pass}
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
 
 #############################################    
 # Wifi Settings 
@@ -80,20 +87,21 @@ ota:
 # NONE (least power saving, Default for ESP8266)
 # LIGHT (Default for ESP32)
 # HIGH (most power saving)
-#############################################
+#############################################  
 wifi:
-  ssid: !secret wifi_ssid
+  ssid: ${wifi_ssid}
-  password: !secret wifi_password
+  password: ${wifi_password}
   #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
   #manual_ip: #optional static IP address
-    #static_ip: 192.168.x.x
+    #static_ip: ${static_ip_address}
-    #gateway: 192.168.X.x
+    #gateway: ${static_ip_gateway}
-    #subnet: 255.255.255.0
+    #subnet: ${static_ip_subnet}
   ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
-    ssid: $devicename fallback AP
+    ssid: ${devicename} fallback AP
-    password: !secret fallback_ap_password
+    password: ${fallback_ap_password}
-    ap_timeout: 5min #default is 1min
+    ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
-captive_portal: # Fallback captive portal https://esphome.io/components/captive_portal.html
+
+captive_portal:
 
 #############################################    
 # Web Portal for display and monitoring
@@ -127,7 +135,6 @@ mqtt:
 # PEZEM4 Power Monitoring
 # https://esphome.io/components/sensor/pzemac.html
 #############################################
-
 uart:
   rx_pin: GPIO3
   tx_pin: GPIO1

esphome/esp-midesklamp1s.yaml

@@ -0,0 +1,291 @@
+#############################################
+#############################################
+# Mi Smart LED Desk Lamp 1S
+# ESP32, LED Strip with variable white colour temp, rotary encoder
+# https://www.mi.com/global/product/mi-led-desk-lamp-1s/
+#############################################
+#############################################
+
+#############################################
+# SECRETS
+# Secrets file is usually at config/secrets.yaml
+# or config/esphome/secrets.yaml
+# depending on your setup with HA
+#############################################
+# SECRETS FILE needs these specific secrets:
+# esp-midesklamp1s_api_key
+# esp-midesklamp1s_ota_pass
+# esp-midesklamp1s_static_ip (Optional)
+# esp-midesklamp1s_gateway (Optional)
+# esp-midesklamp1s_subnet (Optional)
+#
+# SECRETS FILE needs these generic Secrets:
+# wifi_ssid
+# wifi_password
+# fallback_ap_password
+# mqtt_server
+# mqtt_username
+# mqtt_password
+# web_server_username (Optional)
+# web_server_password (Optional)
+#############################################
+
+#############################################
+# VARIABLE SUBSTITUTIONS
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  device_name: esp-midesklamp1s
+  friendly_name: "Mi 1S Lamp Office "
+  description_comment: "Office Desk Lamp with variable white colour temp and rotary encoder for brightness"
+
+  # if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-midesklamp1s_api_key # unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-midesklamp1s_ota_pass # unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+
+  # Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-midesklamp1s_static_ip
+  #static_ip_gateway: !secret esp-midesklamp1s_gateway
+  #static_ip_subnet: !secret esp-midesklamp1s_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" # main topic for the mqtt server, call it what you like
+
+  web_server_username: !secret web_server_username
+  web_server_password: !secret web_server_password
+
+  update_time: 60s # update time for for general temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name} # appears as main name on the esphome page in HA
+  comment: ${description_comment} # appears as comment on the esphome page in HA
+  #min_version: 2024.6.0
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: esp32doit-devkit-v1
+  framework:
+    type: esp-idf # Suggest using the ESP-IDF Framework. Changing from 'arduino' to 'esp-idf' needs a cabled flash to correct partitions
+    version: recommended # recommended, latest or dev
+
+    # these just for the esp32doit-devkit-v1 and Mi S Lamp 
+    sdkconfig_options:
+      CONFIG_FREERTOS_UNICORE: y
+    advanced:
+      ignore_efuse_mac_crc: true
+
+#############################################    
+# ESPHome Logging Enabl
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  # INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+  
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: ${device_name} fallback AP
+    password: ${fallback_ap_password}
+    ap_timeout: 30min # Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+#web_server:
+#  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${device_name}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+#############################################
+# Time Component
+# https://esphome.io/components/time/index.html#time-component
+# Sync with HA Time.  Probably not really necessary.
+#############################################
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+#############################################
+# Text Sensors
+# https://esphome.io/components/text_sensor/index.html
+#############################################
+text_sensor:
+  - platform: version
+    name: ${friendly_name} Version
+  - platform: wifi_info
+    ip_address:
+      name: ${friendly_name} IP Address
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+  - platform: uptime      # Uptime for this device
+    name: ${friendly_name} Uptime
+    update_interval: ${update_time}  
+  - platform: wifi_signal # Wifi Strength
+    name: ${friendly_name} Wifi Signal
+    update_interval: ${update_time}  
+
+  # Mi Desk Lamp 1S Configuration
+  - platform: rotary_encoder
+    id: rotation
+    pin_a: GPIO27
+    pin_b: GPIO26
+    resolution: 2
+    on_value:
+      then:
+        - if:
+            condition:
+              # Check if Button is pressed while rotating
+              lambda: "return id(button).state;"
+            then:
+              # If Button is pressed, change CW/WW
+              - lambda: |-
+                  auto min_temp = id(light1).get_traits().get_min_mireds();
+                  auto max_temp = id(light1).get_traits().get_max_mireds();
+                  auto cur_temp = id(light1).current_values.get_color_temperature();
+                  auto new_temp = max(min_temp, min(max_temp, cur_temp + (x*10)));
+                  auto call = id(light1).turn_on();
+                  call.set_color_temperature(new_temp);
+                  call.perform();
+            else:
+              # If Button is not pressed, change brightness
+              - light.dim_relative:
+                  id: light1
+                  relative_brightness: !lambda |-
+                    return x / 25.0;
+        # Reset Rotation to 0
+        - sensor.rotary_encoder.set_value:
+            id: rotation
+            value: 0
+
+#############################################
+# Binary Sensors
+# https://esphome.io/components/binary_sensor/index.html
+#############################################
+binary_sensor:
+  - platform: gpio
+    id: button
+    pin:
+      number: GPIO33
+      inverted: True
+      mode: INPUT_PULLDOWN
+    on_click:
+      then:
+        - light.toggle:
+            id: light1
+            transition_length: 0.2s
+
+#############################################
+# Base Output Component
+# https://esphome.io/components/output/index.html#base-output-configuration
+#############################################
+output:
+  - platform: ledc    # Cool White LED PWM
+    pin: GPIO2
+    id: output_cw
+    frequency: 40000Hz
+    power_supply: power
+  - platform: ledc
+    pin: GPIO4        # Warm White LED PWM
+    id: output_ww
+    power_supply: power
+    frequency: 40000Hz
+
+#############################################
+# Power Supply Component
+# https://esphome.io/components/power_supply.html#power-supply-component
+#############################################
+power_supply:
+  - id: power
+    pin: GPIO12
+    enable_time: 0s
+    keep_on_time: 0s
+
+#############################################
+# Light Component
+# https://esphome.io/components/light/index.html#light-component
+#############################################
+light:
+  - platform: cwww # https://esphome.io/components/light/cwww.html#cold-white-warm-white-light
+    id: light1
+    default_transition_length: 0s
+    constant_brightness: true
+    name: "${friendly_name} Light"
+    cold_white: output_cw
+    warm_white: output_ww
+    cold_white_color_temperature: 4800 K
+    warm_white_color_temperature: 2500 K # 2500k is the original value of the lamp. To correct binning for 2700k to look more like 2700k use 2650k instead
+    restore_mode: ALWAYS_ON
+    gamma_correct: 0

esphome/esp-occupancylaundry.yaml

@@ -1,439 +0,0 @@
-
-#############################################
-#############################################
-# HiLink LD1125H mmWave sensor, with BME280 Temp/Hum/Pres Sensor on an ESP32
-# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/tree/main
-# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/blob/main/LD1125H/ESP32-LD1125H-Complete.yaml
-#
-# mth1: 0 to 2.8m sensitive
-# mth2: 2.8 to 8m sensitive
-# mth3: above 8m sensitive
-# rmax: max distance
-# Clearance Time: Mov/Occ to Clearance waiting time
-# Movement Time: Mov to Occ waiting time
-#
-#############################################
-#############################################
-
-#############################################
-# Variable Substitutions
-#############################################
-substitutions:
-  devicename: "esp-occupancylaundry"
-  friendly_name: "Laundry Occupancy"
-  description_comment: "D1 Mini ESP32 with LD1125H mmWave and environment sensors for laundry"
-  api_key: !secret esp-occupancylaundry_api_key #unfortunately you can't use substitutions in secrets names
-  ota_pass: !secret esp-occupancylaundry_ota_pass #unfortunately you can't use substitutions in secrets names
-  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
-  update_time: 30s #update time for for temp sensors etc
-
-#############################################
-# ESPHome
-# https://esphome.io/components/esphome.html
-#############################################
-esphome:
-  name: ${devicename}
-  comment: ${description_comment} #appears on the esphome page in HA
-  on_boot:    #LD1125H Initial Setting, will remember previous values (if set)
-    priority: -200
-    then:
-      - uart.write:
-          id: LD1125H_UART_BUS
-          data: !lambda |-
-            std::string th1st = "mth1=" + str_sprintf("%.0f",id(LD1125H_mth1).state) +"\r\n";
-            return std::vector<uint8_t>(th1st.begin(), th1st.end());
-      - uart.write:
-          id: LD1125H_UART_BUS
-          data: !lambda |-
-            std::string th2st = "mth2=" + str_sprintf("%.0f",id(LD1125H_mth2).state) +"\r\n";
-            return std::vector<uint8_t>(th2st.begin(), th2st.end());
-      - uart.write:
-          id: LD1125H_UART_BUS
-          data: !lambda |-
-            std::string th3st = "mth3=" + str_sprintf("%.0f",id(LD1125H_mth3).state) +"\r\n";
-            return std::vector<uint8_t>(th3st.begin(), th3st.end());
-      - uart.write:
-          id: LD1125H_UART_BUS
-          data: !lambda |-
-            std::string rmaxst = "rmax=" + str_sprintf("%.1f",id(LD1125H_rmax).state) +"\r\n";
-            return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
-
-#############################################
-# ESP Platform and Framework
-# https://esphome.io/components/esp32.html
-#############################################
-esp32:
-  #board: nodemcu-32s
-  board: esp32dev
-  framework:
-    #type: arduino
-    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
-    version: recommended #recommended, latest or dev
-
-#############################################
-# i2s bus
-# https://esphome.io/components/i2c.html
-#############################################
-i2c:
-  sda: GPIO19
-  scl: GPIO21
-  scan: True  
-  frequency: 100kHz #10, 50, 100, 200, 800 are possible settings, 100kHz was reliable for me
-
-#############################################    
-# ESPHome external or custom components to use
-# https://esphome.io/components/external_components.html
-############################################# 
-external_components:
-  - source:
-      type: git
-      url: https://github.com/ssieb/custom_components #Thanks for @ssieb components.
-    components: [ serial ]  #text_sensor that reads lines for a uart. Also, a sensor that reads single values from the uart.
-
-#############################################    
-# ESPHome Logging Enable
-# https://esphome.io/components/logger.html
-############################################# 
-logger:
-  level: INFO  #INFO Level suggested, or DEBUG for testing
-  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
-  #esp8266_store_log_strings_in_flash: false
-  #tx_buffer_size: 64
-
-#############################################    
-# Enable the Home Assistant API
-# https://esphome.io/components/api.html
-#############################################  
-api:
-  encryption:
-    key: ${api_key}
-
-#############################################    
-# Enable Over the Air Update Capability
-# https://esphome.io/components/ota.html?highlight=ota
-#############################################  
-ota:
-  safe_mode: true  #Safe mode will detect boot loops
-  password: ${ota_pass}
-
-#############################################    
-# Wifi Settings 
-# https://esphome.io/components/wifi.html
-#############################################  
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
-  #manual_ip: #optional static IP address
-    #static_ip: 192.168.x.x
-    #gateway: 192.168.X.x
-    #subnet: 255.255.255.0
-  ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
-    ssid: $devicename fallback AP
-    password: !secret fallback_ap_password
-    ap_timeout: 5min #default is 1min
-
-#############################################    
-# Web Portal for display and monitoring
-# Turning this off is probably a good idea to save resources.
-# https://esphome.io/components/web_server.html
-#############################################   
-#web_server:
-#  port: 80
-#   username: !secret web_server_username #probably a good idea to secure it
-#    password: !secret web_server_password
-
-#############################################
-# MQTT Monitoring
-# https://esphome.io/components/mqtt.html?highlight=mqtt
-# MUST also have api enabled if you enable MQTT
-#############################################
-mqtt:
-  broker: !secret mqtt_server
-  topic_prefix: ${mqtt_topic}/${devicename}
-  username: !secret mqtt_username
-  password: !secret mqtt_password
-
-#############################################    
-# Bluetooth
-# https://esphome.io/components/bluetooth_proxy.html
-# https://esphome.io/components/esp32_ble_tracker.html
-# Remember that this takes a LOT of processing. On the 
-# ESP32, enable the  IDF framework, and disable the 
-# Web server component.  Changing to the IDF framework 
-# needs to be via cable not OTA to change the
-# partition setup.
-#############################################  
-#esp32_ble_tracker:
-  
-#bluetooth_proxy:
-  #active: true
-
-
-#############################################
-# UART Serial
-# hardware on EPS32, but software, and can be glitchy on ESP8266
-# https://esphome.io/components/uart.html?highlight=uart
-#############################################
-uart:
-  id: LD1125H_UART_BUS
-  rx_pin: GPIO16  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
-  tx_pin: GPIO17  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
-#  rx_pin: GPIO1  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
-#  tx_pin: GPIO0 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
-  baud_rate: 115200
-  data_bits: 8
-  stop_bits: 1
-  parity: NONE
-#  debug:
-#    direction: BOTH
-#    dummy_receiver: false
-#    after:
-#      delimiter: "\n"
-#    sequence:
-#      - lambda: UARTDebug::log_string(direction, bytes);
-
-#############################################
-# Global Variables for use in automations etc
-# https://esphome.io/guides/automations.html?highlight=globals#global-variables
-#############################################
-globals:
-  - id: LD1125H_Last_Time
-    type: time_t
-    restore_value: no
-    initial_value: time(NULL)
-  - id: LD1125H_Last_Mov_Time
-    type: time_t
-    restore_value: no
-    initial_value: time(NULL)
-  - id: LD1125H_Clearence_Status
-    type: bool
-    restore_value: no
-    initial_value: "false"
-
-#############################################
-# General esp status LED
-# https://esphome.io/components/status_led.html
-#############################################
-status_led:
-  pin:
-    number: GPIO2 #ESP32 Onboard LED
-    ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
-    inverted: false
-
-#############################################
-# Interval Automations 
-# https://esphome.io/guides/automations.html       
-#############################################
-interval:
-  - interval: 1s #Clearance Scan Time
-    setup_priority: -200
-    then:
-      lambda: |-
-        if ((time(NULL)-id(LD1125H_Last_Time))>id(LD1125H_Clear_Time).state) {
-          if ((id(LD1125H_Clearence_Status) == false) || (id(LD1125H_Occupancy).state != "Clearance")) {
-            id(LD1125H_Occupancy).publish_state("Clearance");
-            id(LD1125H_Clearence_Status) = true;
-          }
-          if (id(LD1125H_MovOcc_Binary).state == true) {
-            id(LD1125H_MovOcc_Binary).publish_state(false);
-          }
-          if (id(LD1125H_Mov_Binary).state == true) {
-            id(LD1125H_Mov_Binary).publish_state(false);
-          }
-        }
-
-#############################################
-# Number Sensors (custom component)        
-# refer https://github.com/ssieb/esphome_components/tree/master/components/serial
-#############################################
-number:
-  - platform: template
-    name: ${friendly_name} LD1125H mth1 #mth1 is 0~2.8m Sensitivity.
-    id: LD1125H_mth1
-    icon: "mdi:cogs"
-    optimistic: true
-    restore_value: true #If you don't want to store the setting at ESP, set it to false.
-    initial_value: "60.0" #Default mth1 Setting
-    min_value: 10.0
-    max_value: 600.0
-    step: 5.0
-    set_action:
-      then:
-        - uart.write:
-            id: LD1125H_UART_BUS
-            data: !lambda |-
-              std::string th1st = "mth1=" + str_sprintf("%.0f",x) +"\r\n";
-              return std::vector<uint8_t>(th1st.begin(), th1st.end());
-  - platform: template
-    name: ${friendly_name} LD1125H mth2 #mth2 is 2.8~8m Sensitivity.
-    id: LD1125H_mth2
-    icon: "mdi:cogs"
-    optimistic: true
-    restore_value: true #If you don't want to store the setting at ESP, set it to false.
-    initial_value: "30" #Default mth2 Setting
-    min_value: 5
-    max_value: 300
-    step: 5
-    set_action:
-      then:
-        - uart.write:
-            id: LD1125H_UART_BUS
-            data: !lambda |-
-              std::string th2st = "mth2=" + str_sprintf("%.0f",x) +"\r\n";
-              return std::vector<uint8_t>(th2st.begin(), th2st.end());
-  - platform: template
-    name: ${friendly_name} LD1125H mth3 #mth3 is above 8m Sensitivity.
-    id: LD1125H_mth3
-    icon: "mdi:cogs"
-    optimistic: true
-    restore_value: true #If you don't want to store the setting at ESP, set it to false.
-    initial_value: "20" #Default mth3 Setting
-    min_value: 5
-    max_value: 200
-    step: 5
-    set_action:
-      then:
-        - uart.write:
-            id: LD1125H_UART_BUS
-            data: !lambda |-
-              std::string th3st = "mth3=" + str_sprintf("%.0f",x) +"\r\n";
-              return std::vector<uint8_t>(th3st.begin(), th3st.end());
-  - platform: template
-    name: ${friendly_name} LD1125H rmax #rmax is max detection distance.
-    id: LD1125H_rmax
-    icon: "mdi:cogs"
-    optimistic: true
-    restore_value: true #If you don't want to store the setting at ESP, set it to false.
-    initial_value: "8" #Default rmax Setting
-    min_value: 0.4
-    max_value: 12
-    step: 0.1
-    set_action:
-      then:
-        - uart.write:
-            id: LD1125H_UART_BUS
-            data: !lambda |-
-              std::string rmaxst = "rmax=" + str_sprintf("%.1f",x) +"\r\n";
-              return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
-  - platform: template
-    name: ${friendly_name} LD1125H Clearence Time
-    id: LD1125H_Clear_Time
-    icon: "mdi:cogs"
-    optimistic: true
-    restore_value: true #If you don't want to store the setting at ESP, set it to false.
-    initial_value: "5" #LD1125H Mov/Occ > Clearence Time Here
-    min_value: 0.5
-    max_value: 20
-    step: 0.5
-  - platform: template
-    name: ${friendly_name} LD1125H Movement Time
-    id: LD1125H_Mov_Time
-    icon: "mdi:cogs"
-    optimistic: true
-    restore_value: true #If you don't want to store the setting at ESP, set it to false.
-    initial_value: "1" #LD1125H Mov > Occ Time Here
-    min_value: 0.5
-    max_value: 10
-    step: 0.5
-
-#############################################
-# General Sensors 
-# https://esphome.io/components/sensor/index.html
-#############################################
-sensor:
-  - platform: bme280_i2c
-    temperature:
-      name: ${friendly_name} BME280 Temp
-      accuracy_decimals: 1     
-      oversampling: 2x
-    pressure:
-      name: ${friendly_name} BME280 Pressure
-      oversampling: 2x
-    humidity:
-      name: ${friendly_name} BME280 Humidity
-      accuracy_decimals: 1     
-      oversampling: 2x
-    address: 0x76
-    update_interval: ${update_time}   
-  - platform: uptime
-    name: ${friendly_name} Uptime
-  - platform: template
-    name: ${friendly_name} LD1125H Distance
-    id: LD1125H_Distance
-    icon: "mdi:signal-distance-variant"
-    unit_of_measurement: "m"
-    accuracy_decimals: 2
-    filters:    # Use Fliter To Debounce
-    - sliding_window_moving_average:
-        window_size: 8
-        send_every: 2
-    - heartbeat: 0.2s
-
-#############################################
-# Text Sensors (custom component)
-# refer https://github.com/ssieb/esphome_components/tree/master/components/serial
-#############################################
-text_sensor:
-  - platform: serial
-    uart_id: LD1125H_UART_BUS
-    name: ${friendly_name} LD1125H UART Text
-    id: LD1125H_UART_Text
-    icon: "mdi:format-text"
-    internal: True #If Don't Want to See UART Receive Data, Set To True
-    on_value:
-      lambda: |-
-        if (id(LD1125H_UART_Text).state.substr(0,3) == "occ") {
-          id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str()));
-          if ((time(NULL)-id(LD1125H_Last_Mov_Time))>id(LD1125H_Mov_Time).state) {
-            id(LD1125H_Occupancy).publish_state("Occupancy");
-            if (id(LD1125H_MovOcc_Binary).state == false) {
-              id(LD1125H_MovOcc_Binary).publish_state(true);
-            }
-            if (id(LD1125H_Mov_Binary).state == true) {
-              id(LD1125H_Mov_Binary).publish_state(false);
-            }
-          }
-          if (id(LD1125H_MovOcc_Binary).state == false) {
-            id(LD1125H_MovOcc_Binary).publish_state(true);
-          }
-          id(LD1125H_Last_Time) = time(NULL);
-          if (id(LD1125H_Clearence_Status) == true) {
-            id(LD1125H_Clearence_Status) = false;
-          }
-        }
-        else if (id(LD1125H_UART_Text).state.substr(0,3) == "mov") {
-          id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str()));
-          id(LD1125H_Occupancy).publish_state("Movement");
-          if (id(LD1125H_MovOcc_Binary).state == false) {
-            id(LD1125H_MovOcc_Binary).publish_state(true);
-          }
-          if (id(LD1125H_Mov_Binary).state == false) {
-            id(LD1125H_Mov_Binary).publish_state(true);
-          }
-          id(LD1125H_Last_Mov_Time) = time(NULL);
-          id(LD1125H_Last_Time) = time(NULL);
-          if (id(LD1125H_Clearence_Status) == true) {
-            id(LD1125H_Clearence_Status) = false;
-          }
-        }
-  - platform: template
-    name: ${friendly_name} LD1125H Occupancy Status
-    id: LD1125H_Occupancy
-    icon: "mdi:motion-sensor"
-
-#############################################
-# Binary Sensors
-# https://esphome.io/components/binary_sensor/index.html
-#############################################
-binary_sensor:
-  - platform: status
-    name: ${friendly_name} Status
-  - platform: template
-    name: ${friendly_name} LD1125H Occupancy or Movement
-    id: LD1125H_MovOcc_Binary
-    device_class: occupancy
-  - platform: template
-    name: ${friendly_name} LD1125H Movement
-    id: LD1125H_Mov_Binary
-    device_class: motion  

esphome/esp-occupancyoffice.yaml

@@ -1,4 +1,3 @@
-
 #############################################
 #############################################
 # HiLink LD1125H mmWave sensor, with BME280 Temp/Hum/Pres Sensor on an ESP32
@@ -24,7 +23,7 @@
 #############################################
 substitutions:
   devicename: "esp-occupancyoffice"
-  friendly_name: "Office State"
+  friendly_name: "Office Occupancy & Environment"
   description_comment: "D1 Mini ESP32 with LD1125H mmWave and environment sensors for downstairs office"
 
   #if NOT using a secrets file, just replace these with the passwords etc (in quotes)
@@ -54,7 +53,9 @@ substitutions:
 #############################################
 esphome:
   name: ${devicename}
+  friendly_name: ${friendly_name}
   comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0
   on_boot:    #LD1125H Initial Setting, will remember previous values (if set)
     priority: -200
     then:
@@ -84,23 +85,12 @@ esphome:
 # https://esphome.io/components/esp32.html
 #############################################
 esp32:
-  #board: nodemcu-32s
   board: esp32dev
   framework:
     #type: arduino
     type: esp-idf  #Suggest using the ESP-IDF Framework. Changing from arduino to esp-idf needs a cabled download to change partitions
     version: recommended #recommended, latest or dev
 
-#############################################
-# i2s bus
-# https://esphome.io/components/i2c.html
-#############################################
-i2c:
-  sda: GPIO19
-  scl: GPIO21
-  scan: True  
-  frequency: 100kHz #10, 50, 100, 200, 800 are possible settings, 100kHz was reliable for me
-
 #############################################    
 # ESPHome external or custom components to use
 # https://esphome.io/components/external_components.html
@@ -129,14 +119,26 @@ logger:
 api:
   encryption:
     key: ${api_key}
+  on_client_connected:
+    - esp32_ble_tracker.start_scan:
+       continuous: true
+  on_client_disconnected:
+    - esp32_ble_tracker.stop_scan:
 
 #############################################    
 # Enable Over the Air Update Capability
 # https://esphome.io/components/ota.html?highlight=ota
 #############################################  
 ota:
-  safe_mode: true  #Safe mode will detect boot loops
+  - platform: esphome
-  password: ${ota_pass}
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
 
 #############################################    
 # Wifi Settings 
@@ -155,10 +157,10 @@ wifi:
     #static_ip: ${static_ip_address}
     #gateway: ${static_ip_gateway}
     #subnet: ${static_ip_subnet}
-  ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
     ssid: ${devicename} fallback AP
     password: ${fallback_ap_password}
-    ap_timeout: 5min #default is 1min
+    ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
 
 #############################################    
 # Web Portal for display and monitoring
@@ -182,20 +184,17 @@ mqtt:
   username: ${mqtt_username}
   password: ${mqtt_password}
 
-#############################################    
+#############################################
-# Bluetooth
+# i2c bus
-# https://esphome.io/components/bluetooth_proxy.html
+# https://esphome.io/components/i2c.html
-# https://esphome.io/components/esp32_ble_tracker.html
+# 10, 50, 100, 200, 800 are possible settings
-# Remember that this takes a LOT of processing. On the 
+# for frequency, 50kHz is default
-# ESP32, enable the  IDF framework, and disable the 
+#############################################
-# Web server component.  Changing to the IDF framework 
+i2c:
-# needs to be via cable not OTA to change the
+  sda: GPIO19
-# partition setup.
+  scl: GPIO21
-#############################################  
+  scan: True #look for devices on boot up and report
-#bluetooth_proxy:
+  frequency: 50kHz
-#  active: true
-
-#esp32_ble_tracker:
 
 #############################################
 # UART Serial
@@ -211,6 +210,24 @@ uart:
   stop_bits: 1
   parity: NONE
 
+#############################################    
+# Bluetooth
+# https://esphome.io/components/bluetooth_proxy.html
+# https://esphome.io/components/esp32_ble_tracker.html
+# Remember that this takes a LOT of processing. On the 
+# ESP32, enable the  IDF framework, and disable the 
+# Web server component.  Changing to the IDF framework 
+# needs to be via cable not OTA to change the
+# partition setup.
+#############################################  
+bluetooth_proxy:
+  active: true
+  cache_services: true
+
+esp32_ble_tracker:
+    scan_parameters:
+      continuous: false
+
 #############################################
 # Global Variables for use in automations etc
 # https://esphome.io/guides/automations.html?highlight=globals#global-variables
@@ -374,8 +391,10 @@ sensor:
       oversampling: 2x
     address: 0x76
     update_interval: ${update_time}   
+
   - platform: uptime
     name: ${friendly_name} Uptime
+    
   - platform: template
     name: ${friendly_name} LD1125H Distance
     id: LD1125H_Distance

esphome/esp-occupancystair.yaml

@@ -18,7 +18,7 @@
 #############################################
 substitutions:
   devicename: "esp-occupancystair"
-  friendly_name: "Stair Occupancy"
+  friendly_name: "Stair Occupancy and Underhouse Environment"
   description_comment: "D1 Mini ESP32 with LD2410 mmWave for internal stairwell and environment sensors for under house"
   api_key: !secret esp-occupancystair_api_key #unfortunately you can't use substitutions in secrets names
   ota_pass: !secret esp-occupancystair_ota_pass #unfortunately you can't use substitutions in secrets names
@@ -46,7 +46,9 @@ substitutions:
 #############################################
 esphome:
   name: ${devicename}
+  friendly_name: ${friendly_name}
   comment: ${description_comment} #appears on the esphome page in HA
+  min_version: 2024.6.0
   #on_boot:    #Initial Setting, will remember previous values (if set)
     #priority: -200
     #then:
@@ -95,8 +97,15 @@ api:
 # https://esphome.io/components/ota.html?highlight=ota
 #############################################  
 ota:
-  safe_mode: true  #Safe mode will detect boot loops
+  - platform: esphome
-  password: ${ota_pass}
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
 
 #############################################    
 # Wifi Settings 
@@ -115,18 +124,18 @@ wifi:
     #static_ip: ${static_ip_address}
     #gateway: ${static_ip_gateway}
     #subnet: ${static_ip_subnet}
-  ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
     ssid: ${devicename} fallback AP
     password: ${fallback_ap_password}
-    ap_timeout: 5min #default is 1min
+    ap_timeout: 30min #Time until it brings up fallback AP. default is 1min
 
 #############################################    
 # Web Portal for display and monitoring
 # Turning this off is probably a good idea to save resources.
 # https://esphome.io/components/web_server.html
 #############################################   
-web_server:
+#web_server:
-  port: 80
+#  port: 80
 #  auth:
 #   username: ${web_server_username} #probably a good idea to secure it
 #   password: ${web_server_password}

esphome/esp-weatherstation.yaml

@@ -171,9 +171,15 @@ api:
 #############################################  
 ota:
   - platform: esphome
-    #safe_mode: true #Safe mode will detect boot loops
     password: ${ota_pass}
 
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
 #############################################    
 # Wifi Settings 
 # https://esphome.io/components/wifi.html
@@ -191,10 +197,10 @@ wifi:
     #static_ip: 192.168.x.x
     #gateway: 192.168.X.x
     #subnet: 255.255.255.0
-  ap:   #Details for fallback hotspot (captive portal) in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
     ssid: $devicename fallback AP
     password: !secret fallback_ap_password
-    ap_timeout: 5min #default is 1min
+    ap_timeout: 30min #default is 1min
 
 #############################################    
 # Web Portal for display and monitoring
@@ -473,9 +479,9 @@ sensor:
           window_size: 4
           send_every: 1
       #- clamp:
-       #   min_value: 0
+      #    min_value: 0
-        #  max_value: 250 #if anything over that, we have debounce issues or are going to die
+      #    max_value: 250 #if anything over that, we have debounce issues or are going to die
-         # ignore_out_of_range: true
+      #    ignore_out_of_range: true
 
   ################################
   # Pulse Meter for measuring wind speed

esphome/esp-winefridge.yaml

@@ -0,0 +1,228 @@
+#############################################
+#############################################
+
+#############################################
+#############################################
+
+#############################################
+# Variable Substitutions
+# Give this a useful name & description here
+# and change values accordingly
+#############################################
+substitutions:
+  devicename: "esp-winefridge"
+  friendly_name: "Wine Fridge Controller"
+  description_comment: "Peltier based wine fridge thermostat controller"
+
+  #if NOT using a secrets file, just replace these with the passwords etc in speech marks
+  api_key: !secret esp-winefridge_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-winefridge_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_pass: !secret wifi_password
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+  update_time: 30s #update time for for various temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  comment: ${description_comment} #appears on the esphome page in HA
+  #on_boot:    #Initial Setting stuff
+    #priority: -200
+    #then:
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html OR
+# https://esphome.io/components/esp8266.html
+#############################################
+#esp32:
+#  board: 
+#  framework:
+#    type: arduino
+#    #type: esp-idf  #Suggested Use ESP-IDF Framework for ESP32, or unplugging the UART Cable Might Cause ESP32 Hang. 
+#    version: recommended #recommended, latest or dev
+
+esp8266:
+  board: d1_mini
+
+
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: INFO  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_pass}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: 192.168.x.x
+    #gateway: 192.168.X.x
+    #subnet: 255.255.255.0
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: $devicename fallback AP
+    password: !secret fallback_ap_password
+    ap_timeout: 30min #default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off if you don't really need it
+# is probably a good idea to save resources.
+# Also, don't use it with other big ESP32 components
+# such as Bluetooth proxy (it will run out of flash
+# and not compile, or it will crash occasionally)
+# https://esphome.io/components/web_server.html
+#############################################   
+web_server:
+  port: 80
+#  version: 1 #V1 occasionally works better, V2 The nicer page
+#   username: !secret web_server_username #probably a good idea to secure it
+#    password: !secret web_server_password
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+
+#############################################
+# General espHome status LED
+# Not needed, but can be useful to see issues
+# https://esphome.io/components/status_led.html
+#############################################
+status_led:
+  pin:
+    number: GPIO2 #Wemos ESP32 and ESP8266 Onboard LEDs use GPIO2
+    inverted: false
+    #ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
+
+#############################################
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+#############################################
+sensor:
+
+  ################################
+  # UPTIME
+  # Device uptime info	
+  # https://esphome.io/components/sensor/uptime.html
+  ################################
+  - platform: uptime
+    name: ${friendly_name} Uptime
+
+  ################################
+  # WIFI SIGNAL
+  # Quality of Wifi in dBm
+  # https://esphome.io/components/sensor/wifi_signal.html
+  ################################
+  - platform: wifi_signal
+    name: ${friendly_name} WiFi Signal
+    update_interval: ${update_time}
+    #retain: true #retain useful if sleeping
+  
+  - platform: resistance
+    sensor: temp_analogue
+    configuration: DOWNSTREAM
+    resistor: 4.7kOhm
+    name: Resistance Sensor
+
+  - platform: adc
+    id: temp_analogue
+    #update_interval: 10s
+    update_interval: never #don't update until the correect GPIO turns on.  This allows two devices on one AI.
+    name: "Temp Analogue"
+    pin: A0
+    filters:
+      - multiply: 3.3
+
+  - platform: template
+    name: "Analogue Sensor 1"
+    update_interval: never
+    id: template_analoguesensor_1
+    lambda: |-
+      return id(temp_analogue);
+
+  - platform: template
+    name: "Analogue Sensor 2"
+    update_interval: never
+    id: template_analoguesensor_2
+    lambda: |-
+      return id(temp_analogue);
+    # lambda: |- return float(id(ch1s));
+
+switch:
+  - platform: gpio
+    pin: D0
+    id: a1_sensor_vcc
+
+  - platform: gpio
+    pin: D1
+    id: a2_sensor_vcc
+
+interval:
+  - interval: 60s
+    then:
+      - switch.turn_on: a1_sensor_vcc
+      - component.update: temp_analogue
+      - component.update: template_analoguesensor_1
+      - switch.turn_off: a1_sensor_vcc
+      - switch.turn_on: a2_sensor_vcc
+      - component.update: temp_analogue
+      - component.update: template_analoguesensor_2
+      - switch.turn_off: a2_sensor_vcc
+
+
+

esphome/trash/esp-entmulti.yaml

@@ -0,0 +1,486 @@
+#############################################
+#############################################
+# 
+# HiLink LD1125H mmWave sensor, with BME280 Temp/Hum/Pres Sensor on an ESP32
+# https://zorruno.com/2024/mmwave-occupancy-with-esp32-ld1125h/
+# 
+# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/tree/main
+# https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/blob/main/LD1125H/ESP32-LD1125H-Complete.yaml
+#
+# mth1: 0 to 2.8m sensitive
+# mth2: 2.8 to 8m sensitive
+# mth3: above 8m sensitive
+# rmax: max distance
+# Clearance Time: Mov/Occ to Clearance waiting time
+# Movement Time: Mov to Occ waiting time
+#
+#############################################
+#############################################
+
+#############################################
+# Variable Substitutions
+# Give the device a useful name & description here
+# and change values accordingly.
+#############################################
+substitutions:
+  devicename: "esp-entmulti"
+  friendly_name: "Entrance Multisensor"
+  description_comment: "D1 Mini ESP32 outside entranceway with BT Proxy, mmWave presence and more"
+
+  #if NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  api_key: !secret esp-entmulti_api_key #unfortunately you can't use substitutions in secrets names
+  ota_pass: !secret esp-entmulti_ota_pass #unfortunately you can't use substitutions in secrets names
+  wifi_ssid: !secret wifi_ssid
+  wifi_password: !secret wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+  #Add these if we are giving it a static ip, or remove them in the Wifi section
+  #static_ip_address: !secret esp-entmulti_static_ip
+  #static_ip_gateway: !secret esp-entmulti_gateway
+  #static_ip_subnet: !secret esp-entmulti_subnet
+
+  mqtt_server: !secret mqtt_server
+  mqtt_username: !secret mqtt_username
+  mqtt_password: !secret mqtt_password
+  mqtt_topic: "esphome" #main topic for the mqtt server, call it what you like
+
+  #web_server_username: !secret web_server_username
+  #web_server_password: !secret web_server_password
+
+  update_time: 30s #update time for for general temp sensors etc
+
+#############################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#############################################
+esphome:
+  name: ${devicename}
+  comment: ${description_comment} #appears on the esphome page in HA
+
+
+#############################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#############################################
+esp32:
+  board: esp32dev
+  framework:
+    #type: arduino
+    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
+    version: recommended #recommended, latest or dev
+
+#############################################    
+# ESPHome external or custom components to use
+# https://esphome.io/components/external_components.html
+# https://github.com/ssieb/esphome_components/tree/master/components/serial
+############################################# 
+#external_components:
+#  - source:
+#      type: git
+#      url: https://github.com/ssieb/custom_components #Thanks for @ssieb components.
+#    components: [ serial ]  #text_sensor that reads lines for a uart. Also, a sensor that reads single binary values from the uart.
+
+#############################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: DEBUG  #INFO Level suggested, or DEBUG for testing
+  baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#############################################    
+# Enable the Home Assistant API
+# https://esphome.io/components/api.html
+#############################################  
+api:
+  encryption:
+    key: ${api_key}
+
+#############################################    
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################  
+ota:
+  - platform: esphome
+    password: ${ota_pass}
+
+#############################################    
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################  
+safe_mode:
+
+#############################################    
+# Wifi Settings 
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################  
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
+  #manual_ip: #optional static IP address
+    #static_ip: ${static_ip_address}
+    #gateway: ${static_ip_gateway}
+    #subnet: ${static_ip_subnet}
+  ap:   #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: $devicename fallback AP
+    password: !secret fallback_ap_password
+    ap_timeout: 5min #Time until it brings up fallback AP. default is 1min
+
+#############################################    
+# Web Portal for display and monitoring
+# Turning this off is probably a good idea to save resources.
+# https://esphome.io/components/web_server.html
+#############################################   
+web_server:
+  port: 80
+#  auth:
+#   username: ${web_server_username} #probably a good idea to secure it
+#   password: ${web_server_password}
+
+#############################################
+# MQTT Monitoring
+# https://esphome.io/components/mqtt.html?highlight=mqtt
+# MUST also have api enabled if you enable MQTT
+#############################################
+mqtt:
+  broker: ${mqtt_server}
+  topic_prefix: ${mqtt_topic}/${devicename}
+  username: ${mqtt_username}
+  password: ${mqtt_password}
+
+#############################################
+# i2c bus
+# https://esphome.io/components/i2c.html
+# 10, 50, 100, 200, 800 are possible settings
+# for frequency, 50kHz is default
+#############################################
+#i2c:
+#  sda: GPIO19
+#  scl: GPIO21
+#  scan: True #look for devices on boot up and report
+  #frequency: 100kHz
+
+#############################################
+# UART Serial
+# hardware on EPS32, but software, and can be glitchy on ESP8266
+# https://esphome.io/components/uart.html
+#############################################
+uart:
+  id: ld2410_uart
+  rx_pin: GPIO16  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
+  tx_pin: GPIO17  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
+  baud_rate: 256000 # default for LD2410 is 25600, 8, 0, NONE
+  data_bits: 8
+  stop_bits: 1
+  parity: NONE
+
+#############################################    
+# Bluetooth
+# https://esphome.io/components/bluetooth_proxy.html
+# https://esphome.io/components/esp32_ble_tracker.html
+# Remember that this takes a LOT of processing. On the 
+# ESP32, enable the  IDF framework, and disable the 
+# Web server component.  Changing to the IDF framework 
+# needs to be via cable not OTA to change the
+# partition setup.
+#############################################  
+bluetooth_proxy:
+  active: true
+
+esp32_ble_tracker:
+
+#############################################
+# Global Variables for use in automations etc
+# https://esphome.io/guides/automations.html?highlight=globals#global-variables
+#############################################
+
+
+#############################################
+# General esp status LED
+# https://esphome.io/components/status_led.html
+#############################################
+status_led:
+  pin:
+    number: GPIO2 #ESP32 Onboard LED
+    ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
+    inverted: false
+
+#############################################
+# Interval Automations 
+# https://esphome.io/guides/automations.html       
+#############################################
+
+#############################################
+# LD2410 Sensors
+# https://esphome.io/components/sensor/ld2410.html
+# https://www.hlktech.net/index.php?id=988
+#############################################
+ld2410:
+  uart_id: ld2410_uart
+
+#############################################
+# Number Sensors (custom component)        
+# refer https://github.com/ssieb/esphome_components/tree/master/components/serial
+#############################################
+number:
+  - platform: ld2410
+    timeout:
+      name: Timeout
+    light_threshold:
+      name: Light Threshold
+    max_move_distance_gate:
+      name: Max Move Distance Gate
+    max_still_distance_gate:
+      name: Max Still Distance Gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+#The ld2410 select allows you to control your LD2410 Sensor.
+#distance_resolution (Optional): Control the gates distance resolution. Can be 0.75m or 0.2m. Defaults to 0.75m. All options from Select.
+#baud_rate (Optional): Control the serial port baud rate. Defaults to 256000. Once changed, all sensors will stop working until a fresh install with an updated UART Component configuration. All options from Select.
+#light_function (Optional): If set, will affect the OUT pin value, based on light threshold. Can be off, low or above. Defaults to off. All options from Select.
+#out_pin_level (Optional): Control OUT pin away value. Can be low or high. Defaults to low. All options from Select.
+#ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
+select:
+  - platform: ld2410
+    distance_resolution: 
+      name: ${friendly_name} LD2140 Distance Resolution
+    baud_rate:
+      name: ${friendly_name} LD2140 Baud Rate
+    light_function:
+      name: ${friendly_name} LD2140 Light Function
+    out_pin_level:
+      name: ${friendly_name} LD2140 Out Pin Level
+
+#############################################
+# General Sensors 
+# https://esphome.io/components/sensor/index.html
+#############################################
+sensor:
+#  - platform: bme280_i2c
+#    address: 0x76
+#    update_interval: ${update_time}   
+#    temperature:
+#      name: ${friendly_name} BME280 Temp
+#      accuracy_decimals: 1     
+#      oversampling: 2x
+#    pressure:
+#      name: ${friendly_name} BME280 Pressure
+#      oversampling: 2x
+#    humidity:
+#      name: ${friendly_name} BME280 Humidity
+#      accuracy_decimals: 1     
+#      oversampling: 2x
+
+  ################################
+  # WIFI SIGNAL
+  # Quality of Wifi in dBm
+  # https://esphome.io/components/sensor/wifi_signal.html
+  ################################
+  - platform: wifi_signal
+    name: ${friendly_name} WiFi Signal
+    update_interval: 20s
+    #retain: true #retain useful if sleeping
+
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    update_interval: 10s
+
+
+#The ld2410 sensor values
+  - platform: ld2410
+    light:
+      name: Light
+    moving_distance:
+      name : Moving Distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Detection Distance
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+# The ld2410 switch allows you to control your LD2410 Sensor.
+#Bluetooth switch is only useful of you have a B or C model
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: ${friendly_name} LD2140 Engineering Mode
+    #bluetooth:
+      #name: ${friendly_name} LD2140 Control Bluetooth
+
+
+#The ld2410 button allows resetting
+button:
+  - platform: ld2410
+    factory_reset:
+      name: ${friendly_name} LD2140 Factory reset"
+    restart:
+      name: ${friendly_name} LD2140 Restart
+    query_params:
+      name: Query Parameters
+
+#############################################
+# Text Sensors
+# refer https://esphome.io/components/text_sensor/index.html
+#############################################
+#The ld2410 text sensor allows you to get information about your LD2410 Sensor.
+#Bluetooth sensor is only useful of you have a B or C model
+text_sensor:
+  - platform: ld2410
+    version:
+      name: ${friendly_name} LD2140 Firmware Version
+    #mac_address:
+      #name: ${friendly_name} LD2140 BT MAC Address
+
+
+#############################################
+# Binary Sensors
+# https://esphome.io/components/binary_sensor/index.html
+#############################################
+binary_sensor:
+
+  - platform: ld2410
+    has_target:
+      name: ${friendly_name} Presence
+    has_moving_target:
+      name: ${friendly_name} Moving Target
+    has_still_target:
+      name: ${friendly_name} Still Target
+    out_pin_presence_status:
+      name: ${friendly_name} LD2140 Out Pin Presence Status
+
+  #Standard PIR Sensor
+  - platform: gpio
+    pin:
+      number: GPIO13
+      mode:
+        input: True
+        pullup: False
+      inverted: True
+    filters: 
+      - delayed_on: 200ms
+    name: ${friendly_name} PIR Sensor
+    device_class: motion
+
+  #RF Input from Vibration Sensor (Green Bin)
+  - platform: gpio
+    pin:
+      number: GPIO04
+      mode:
+        input: true
+        pullup: true
+      inverted: True
+    name: ${friendly_name} Green Bin motion
+    device_class: vibration
+
+  #RF Input from Vibration Sensor (Red Bin)
+  - platform: gpio
+    pin:
+      number: GPIO15
+      mode:
+        input: true
+        pullup: true
+      inverted: True
+    filters:
+      - delayed_on: 20ms
+    name: ${friendly_name} Red Bin motion
+    device_class: vibration

packages/anniversaries.yaml

@@ -0,0 +1,7 @@
+sensor:
+  - platform: anniversary
+    name: events
+    multiple: false
+    anniversaries:
+      - event: "Holiday"
+        date: "2024-9-14"

packages/firewall_control.yaml

@@ -2,7 +2,7 @@ mqtt:
   switch:
     - unique_id: mollies.internet
       name: "Mollie's Internet Blocking"
-      state_topic: "viewroad-status/firewall/block-unblock-mollie-iphone7"
+      state_topic: "viewroad-status/firewall/block-unblock-mollie-iphone8"
       command_topic: "viewroad-commands/firewall/block-unblock-mollie-devices"
       payload_off: "Unblocked"
       payload_on: "Blocked"
@@ -21,3 +21,9 @@ mqtt:
       payload_press: "Unblocked"
       icon: mdi:web
       retain: false
+    - unique_id: mollies.internet.temp.unblock.1hr
+      name: "Mollie's Internet (1hr Unblock)"
+      command_topic: "viewroad-commands/firewall/tempunblock-mollie-devices-1hr"
+      payload_press: "Unblocked"
+      icon: mdi:web
+      retain: false

packages/fridge_temperatures.yaml

@@ -0,0 +1,45 @@
+automation:
+  - id: publish_fridge_temps_drinks_fridge
+    alias: publish_fridge_temps_drinks_fridge
+    trigger:
+      - platform: state
+        entity_id: sensor.drinks_fridge_environment_lcd_btt01_temperature
+        not_to:
+          - "unavailable"
+          - "unknown"
+    action:
+      - service: mqtt.publish
+        data:
+          topic: "viewroad-status/fridges/drinks-fridge"
+          payload: "{{ trigger.to_state.state }}"
+    mode: single
+
+  - id: publish_freezer_temps_drinks_fridge
+    alias: pub_freezer_temps_drinks_fridge
+    trigger:
+      - platform: state
+        entity_id: sensor.drinks_freezer_environment_lcd_btt02_temperature
+        not_to:
+          - "unavailable"
+          - "unknown"
+    action:
+      - service: mqtt.publish
+        data:
+          topic: "viewroad-status/fridges/drinks-freezer"
+          payload: "{{ trigger.to_state.state }}"
+    mode: single
+
+  - id: publish_main_kitchen_fridge_temp_zth08
+    alias: publish_main_kitchen_fridge_temp_zth08
+    trigger:
+      - platform: state
+        entity_id: sensor.main_kitchen_fridge_temp_zth08
+        not_to:
+          - "unavailable"
+          - "unknown"
+    action:
+      - service: mqtt.publish
+        data:
+          topic: "viewroad-status/fridges/mainkitchen_fridge"
+          payload: "{{ trigger.to_state.state }}"
+    mode: single

packages/media_players.yaml

@@ -1,5 +1,5 @@
-media_player:
+#media_player:
-  # MPD Media Player on Lounge Touchscreen
+# MPD Media Player on Lounge Touchscreen
-  - platform: mpd
+#  - platform: mpd
-    host: !secret lounge_mpd_player
+#    host: !secret lounge_mpd_player
-    scan_interval: 1
+#   scan_interval: 1

packages/ms_teams_status.yaml

@@ -0,0 +1,20 @@
+input_text:
+  teams_status:
+    name: Microsoft Teams status
+    icon: mdi:microsoft-teams
+  teams_activity:
+    name: Microsoft Teams activity
+    icon: mdi:phone-off
+
+sensor:
+  - platform: template
+    sensors:
+      teams_status:
+        friendly_name: "Microsoft Teams status"
+        value_template: "{{states('input_text.teams_status')}}"
+        icon_template: "{{state_attr('input_text.teams_status','icon')}}"
+        unique_id: sensor.teams_status
+      teams_activity:
+        friendly_name: "Microsoft Teams activity"
+        value_template: "{{states('input_text.teams_activity')}}"
+        unique_id: sensor.teams_activity

packages/pool_light_switch_sync.yaml

@@ -0,0 +1,17 @@
+automation:
+  - alias: Turn on pool light with downstairs lounge switch
+    trigger:
+      platform: state
+      entity_id: switch.tasmo_ks811t_0707_downstloun_2c
+      to: "on"
+    action:
+      service: homeassistant.turn_on
+      entity_id: switch.tasmo_athplug_5103_1
+  - alias: Turn off pool light with downstairs lounge switch
+    trigger:
+      platform: state
+      entity_id: switch.tasmo_ks811t_0707_downstloun_2c
+      to: "off"
+    action:
+      service: homeassistant.turn_off
+      entity_id: switch.tasmo_athplug_5103_1

scripts/zha.yaml

@@ -1,2 +0,0 @@
-zha:
-  custom_quirks_path: /config/custom_zha_quirks/