Edit esp-masterbdrmwest.yaml

esphome/esp-masterbdrmwest.yaml

@@ -6,6 +6,9 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-masterbdrmwest.yaml
 #:########################################################################################:#
 # VERSIONS:
+# v1.1 2026-06-12 North Lights now controlled via Tasmota iFan02 MQTT cmnd/stat topics.
+#                 Relay 2 on both switches is virtual/mirror only and follows Tasmota feedback.
+#                 Added sync guard globals/scripts to prevent MQTT/HA feedback chatter.
 # v1.0 2026-06-11 Initial YAML for Master Bedroom West 3-gang switch.
 #:########################################################################################:#
 # HARDWARE:
@@ -15,26 +18,40 @@
 # OPERATION NOTES:
 # - 3-gang KS-811 triple switch.
 # - Relay 1 = Master Bedroom South Lights. VIRTUAL/MIRROR ONLY on this switch; no load connected.
-# - Relay 2 = Master Bedroom North Lights. PHYSICAL LOAD CONNECTED on this switch.
+# - Relay 2 = Master Bedroom North Lights. VIRTUAL/MIRROR ONLY on this switch; no load connected.
+# - Actual North Lights are controlled by Tasmota iFan02 entity light.tasmo_ifan02_3793_bedrm1_1.
 # - Relay 3 = unused output. Forced off/internal; Button 3 does NOT toggle Relay 3.
 # - Button 1 toggles South Lights locally by toggling Relay 1.
-# - Button 2 toggles North Lights locally by toggling Relay 2.
+# - Button 2 requests North Lights ON/OFF via Tasmota MQTT and waits for Tasmota stat feedback.
 # - Button 3 checks the Home Assistant bedside lamp jump/fade switch state and calls the opposite HA action.
-# - Relay 1 and Relay 2 are mirrored to the matching south switch in two ways:
+# - South Lights are mirrored to the matching south switch in two ways:
 #     Method 1: HA blueprint sync between the relay entities (fast path when HA is online).
 #     Method 2: MQTT retained status sync between switches (backup path if HA is down, broker online).
+# - North Lights are mirrored using:
+#     Method 1: HA blueprint sync between the two relay entities and light.tasmo_ifan02_3793_bedrm1_1.
+#     Method 2: Direct Tasmota MQTT cmnd/stat topics. Tasmota stat is the source of truth for Relay 2.
 # - GPIO16 does not support interrupts; polling is used for Button 1 (suppresses warning).
 #:########################################################################################:#
 # MQTT COMMANDS:
-# - North Lights command topic:
+# - North Lights Tasmota command topic:
-#   ${mqtt_local_command_topic1}/set
+#   ${north_lights_tasmota_command_topic}
-#     Payload "On"  -> Relay 2 ON
+#     Payload "ON"  -> iFan02 Light ON
-#     Payload "Off" -> Relay 2 OFF
+#     Payload "OFF" -> iFan02 Light OFF
+#     Empty payload  -> Query current Power1 state
 #
-# - North Lights retained status/sync topic:
+# - North Lights Tasmota status topic:
+#   ${north_lights_tasmota_status_topic}
+#     Payload "ON" / "OFF" updates Relay 2 mirror state on both bedroom switches.
+#
+# - North Lights local command topic:
+#   ${mqtt_local_command_topic1}/set
+#     Payload "On"/"ON"  -> Publish Tasmota Power1 ON command
+#     Payload "Off"/"OFF" -> Publish Tasmota Power1 OFF command
+#
+# - North Lights local status topic:
 #   ${mqtt_local_status_topic1}/state
-#     Payload "On" / "Off" published when Relay 2 changes state.
+#     Payload "On" / "Off" retained when Relay 2 mirror changes.
-#     This same retained status topic is also subscribed to for HA-down two-way sync.
+#     NOTE: For North Lights, this is a local status mirror only. Tasmota stat is the sync source of truth.
 #
 # - South Lights command topic:
 #   ${mqtt_local_command_topic2}/set
@@ -48,16 +65,18 @@
 #:########################################################################################:#
 # OFFLINE NOTES:
 # a) Home Assistant OFFLINE, WiFi OK, MQTT broker OK
-# - Button 1 and Button 2 still control/sync both switches via MQTT retained status topics.
+# - Button 1 still controls/syncs South Lights between both switches via MQTT retained status.
+# - Button 2 still controls the Tasmota/iFan02 North Lights via direct MQTT cmnd/stat topics.
+# - iFan02/Tasmota feedback updates Relay 2 mirror state on both switches via stat topic.
 # - Button 3 cannot toggle the bedside lamp because it requires Home Assistant/API.
 #
 # b) MQTT OFFLINE (or broker unreachable), Home Assistant/API OK
-# - Button 1 and Button 2 still control/sync both switches via the HA blueprint.
+# - Button 1 and Button 2 can still control/sync through HA where the relevant HA entities are available.
 # - Button 3 can still toggle the bedside lamp via Home Assistant/API.
 #
 # c) Home Assistant and MQTT OFFLINE, WiFi OK or entire network OFFLINE
 # - Button 1 controls local Relay 1 only.
-# - Button 2 controls local Relay 2 only.
+# - Button 2 cannot control the North Lights because they are on the separate Tasmota/iFan02 controller.
 # - Button 3 cannot control the bedside lamp.
 # - Accurate time is NOT needed (SNTP not needed).
 #:########################################################################################:#
@@ -71,12 +90,12 @@ substitutions:
   # Device Naming
   device_name: "esp-masterbdrmwest"
   friendly_name: "Master Bedroom Main Lights West"
-  description_comment: "Master Bedroom Main Lights West using a Zemismart KS-811 Triple Push Button. South Lights virtual on Relay 1, North Lights physical on Relay 2, Button 3 toggles bedside lamp jump/fade. (Layout V1.1)"
+  description_comment: "Master Bedroom Main Lights West using a Zemismart KS-811 Triple Push Button. South Lights virtual on Relay 1, North Lights Tasmota/iFan02 mirror on Relay 2, Button 3 toggles bedside lamp jump/fade. (Layout V1.1)"
   device_area: "Master Bedroom"
 
   # Project Naming
   project_name: "Zemismart Technologies.KS-811 Triple"
-  project_version: "v1.0"
+  project_version: "v1.1"
 
   # Passwords & Secrets
   api_key: !secret esp-api_key
@@ -94,7 +113,7 @@ substitutions:
   update_interval: "60s"
 
   # MQTT LOCAL Controls
-  # NOTE: device_name1 is North Lights and maps to Relay 2 on both bedroom switches.
+  # NOTE: device_name1 is North Lights and maps to Relay 2 mirror on both bedroom switches.
   mqtt_device_name1: "masterbrdm-northlights"
   mqtt_local_command_topic1: "${mqtt_command_main_topic}/${mqtt_device_name1}"
   mqtt_local_status_topic1: "${mqtt_status_main_topic}/${mqtt_device_name1}"
@@ -104,10 +123,14 @@ substitutions:
   mqtt_local_command_topic2: "${mqtt_command_main_topic}/${mqtt_device_name2}"
   mqtt_local_status_topic2: "${mqtt_status_main_topic}/${mqtt_device_name2}"
 
+  # Tasmota/iFan02 North Lights MQTT control and feedback
+  north_lights_tasmota_command_topic: "cmnd/tasmo-ifan02-3793-bedrm1-1/Power1"
+  north_lights_tasmota_status_topic: "stat/tasmo-ifan02-3793-bedrm1-1/Power1"
+
   # Switch/Relay/Button Naming
   switch_1_name: "Master Bedroom South Lights"
   switch_2_name: "Master Bedroom North Lights"
-  switch_3_name: "Bedside Lamp" # NOTE: Relay 3 output is unused and forced off
+  switch_3_name: "Bedside Lamp Jump/Fade" # NOTE: Relay 3 output is unused and forced off
 
   # Home Assistant bedside lamp entity controlled by Button 3
   bedside_lamp_entity: "switch.master_bedroom_bedside_lamp_arlec_bulb_master_bedroom_bedside_lamp_arlec_bulb_jump_fade_up_down"
@@ -175,55 +198,79 @@ logger:
   level: "${log_level}"
   #baud_rate: 0
 
+#:########################################################################################:#
+# GLOBALS
+# Used to suppress MQTT feedback loops/chatter when a relay state is being set from MQTT feedback.
+#:########################################################################################:#
+globals:
+  - id: south_update_from_mqtt
+    type: bool
+    restore_value: false
+    initial_value: 'false'
+
+  - id: north_update_from_tasmota
+    type: bool
+    restore_value: false
+    initial_value: 'false'
+
 #:########################################################################################:#
 # MQTT: Device-specific MQTT command + retained status/sync triggers
 # This adds device-specific MQTT command triggers to the common MQTT configuration.
 #:########################################################################################:#
 mqtt:
+  # Query the iFan02/Tasmota light state whenever this ESP reconnects to MQTT.
+  # Tasmota treats an empty command payload as a status query for that command.
+  on_connect:
+    then:
+      - delay: 2s
+      - mqtt.publish:
+          topic: "${north_lights_tasmota_command_topic}"
+          payload: ""
+
   on_message:
     # -------------------------------------------------------------------------
-    # North Lights control/sync (Relay 2 on both bedroom switches)
+    # North Lights local command topic -> Tasmota/iFan02 command topic
     # -------------------------------------------------------------------------
     - topic: "${mqtt_local_command_topic1}/set"
-      payload: "On"
       then:
-        - switch.turn_on: relay_2
+        - lambda: |-
-    - topic: "${mqtt_local_command_topic1}/set"
+            if (x == "On" || x == "ON" || x == "on") {
-      payload: "Off"
+              id(request_north_lights_on).execute();
-      then:
+            } else if (x == "Off" || x == "OFF" || x == "off") {
-        - switch.turn_off: relay_2
+              id(request_north_lights_off).execute();
+            }
 
-    # Retained status is also subscribed to as the MQTT backup sync path.
+    # Tasmota/iFan02 Power1 feedback is the source of truth for Relay 2 mirror state.
-    - topic: "${mqtt_local_status_topic1}/state"
+    - topic: "${north_lights_tasmota_status_topic}"
-      payload: "On"
       then:
-        - switch.turn_on: relay_2
+        - lambda: |-
-    - topic: "${mqtt_local_status_topic1}/state"
+            if (x == "ON" || x == "On" || x == "on") {
-      payload: "Off"
+              id(set_north_on_from_tasmota).execute();
-      then:
+            } else if (x == "OFF" || x == "Off" || x == "off") {
-        - switch.turn_off: relay_2
+              id(set_north_off_from_tasmota).execute();
+            }
 
     # -------------------------------------------------------------------------
     # South Lights control/sync (Relay 1 on both bedroom switches)
     # -------------------------------------------------------------------------
     - topic: "${mqtt_local_command_topic2}/set"
-      payload: "On"
       then:
-        - switch.turn_on: relay_1
+        - lambda: |-
-    - topic: "${mqtt_local_command_topic2}/set"
+            if (x == "On" || x == "ON" || x == "on") {
-      payload: "Off"
+              id(set_south_on_from_command).execute();
-      then:
+            } else if (x == "Off" || x == "OFF" || x == "off") {
-        - switch.turn_off: relay_1
+              id(set_south_off_from_command).execute();
+            }
 
     # Retained status is also subscribed to as the MQTT backup sync path.
     - topic: "${mqtt_local_status_topic2}/state"
-      payload: "On"
       then:
-        - switch.turn_on: relay_1
+        - lambda: |-
-    - topic: "${mqtt_local_status_topic2}/state"
+            if (x == "On" || x == "ON" || x == "on") {
-      payload: "Off"
+              id(set_south_on_from_mqtt).execute();
-      then:
+            } else if (x == "Off" || x == "OFF" || x == "off") {
-        - switch.turn_off: relay_1
+              id(set_south_off_from_mqtt).execute();
+            }
 
 #:########################################################################################:#
 # STATUS LED
@@ -251,6 +298,8 @@ binary_sensor:
       - switch.toggle: relay_1
 
   # Button 2 (GPIO05)
+  # NOTE: This does not toggle Relay 2 directly. It sends the opposite command to the iFan02/Tasmota light.
+  # Relay 2 mirror state is then updated by the Tasmota stat/Power1 feedback topic.
   - platform: gpio
     pin:
       number: GPIO05
@@ -258,7 +307,7 @@ binary_sensor:
       inverted: true
     name: "Button 2: ${switch_2_name}"
     on_press:
-      - switch.toggle: relay_2
+      - script.execute: toggle_north_lights
 
   # Button 3 (GPIO04)
   # NOTE: This does not toggle Relay 3. It checks the HA entity state and calls the opposite HA action.
@@ -282,6 +331,90 @@ binary_sensor:
 # https://esphome.io/components/script.html
 #:########################################################################################:#
 script:
+  # ---------------------------------------------------------------------------
+  # North Lights scripts - Tasmota/iFan02 is source of truth
+  # ---------------------------------------------------------------------------
+  - id: request_north_lights_on
+    mode: restart
+    then:
+      - mqtt.publish:
+          topic: "${north_lights_tasmota_command_topic}"
+          payload: "ON"
+
+  - id: request_north_lights_off
+    mode: restart
+    then:
+      - mqtt.publish:
+          topic: "${north_lights_tasmota_command_topic}"
+          payload: "OFF"
+
+  - id: toggle_north_lights
+    mode: restart
+    then:
+      - if:
+          condition:
+            switch.is_on: relay_2
+          then:
+            - script.execute: request_north_lights_off
+          else:
+            - script.execute: request_north_lights_on
+
+  - id: set_north_on_from_tasmota
+    mode: restart
+    then:
+      - lambda: |-
+          id(north_update_from_tasmota) = true;
+      - switch.turn_on: relay_2
+      - delay: 100ms
+      - lambda: |-
+          id(north_update_from_tasmota) = false;
+
+  - id: set_north_off_from_tasmota
+    mode: restart
+    then:
+      - lambda: |-
+          id(north_update_from_tasmota) = true;
+      - switch.turn_off: relay_2
+      - delay: 100ms
+      - lambda: |-
+          id(north_update_from_tasmota) = false;
+
+  # ---------------------------------------------------------------------------
+  # South Lights scripts - MQTT retained status sync with no re-publish chatter
+  # ---------------------------------------------------------------------------
+  - id: set_south_on_from_command
+    mode: restart
+    then:
+      - switch.turn_on: relay_1
+
+  - id: set_south_off_from_command
+    mode: restart
+    then:
+      - switch.turn_off: relay_1
+
+  - id: set_south_on_from_mqtt
+    mode: restart
+    then:
+      - lambda: |-
+          id(south_update_from_mqtt) = true;
+      - switch.turn_on: relay_1
+      - delay: 100ms
+      - lambda: |-
+          id(south_update_from_mqtt) = false;
+
+  - id: set_south_off_from_mqtt
+    mode: restart
+    then:
+      - lambda: |-
+          id(south_update_from_mqtt) = true;
+      - switch.turn_off: relay_1
+      - delay: 100ms
+      - lambda: |-
+          id(south_update_from_mqtt) = false;
+
+  # ---------------------------------------------------------------------------
+  # Button 3 - HA bedside lamp jump/fade switch
+  # ---------------------------------------------------------------------------
   # Toggle the HA bedside lamp jump/fade switch by checking the current imported HA state first.
   # If it is ON, send OFF. If it is OFF/unknown, send ON.
   - id: toggle_bedside_lamp_jump_fade
@@ -322,17 +455,26 @@ switch:
     id: relay_1
     restore_mode: RESTORE_DEFAULT_OFF
     on_turn_on:
-      - mqtt.publish:
+      - if:
-          topic: "${mqtt_local_status_topic2}/state"
+          condition:
-          payload: "On"
+            lambda: 'return !id(south_update_from_mqtt);'
-          retain: true
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_local_status_topic2}/state"
+                payload: "On"
+                retain: true
     on_turn_off:
-      - mqtt.publish:
+      - if:
-          topic: "${mqtt_local_status_topic2}/state"
+          condition:
-          payload: "Off"
+            lambda: 'return !id(south_update_from_mqtt);'
-          retain: true
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_local_status_topic2}/state"
+                payload: "Off"
+                retain: true
 
-  # Relay 2 (GPIO12) - Master Bedroom North Lights - PHYSICAL LOAD CONNECTED HERE
+  # Relay 2 (GPIO12) - Master Bedroom North Lights - VIRTUAL/MIRROR ONLY ON THIS SWITCH
+  # Tasmota stat/Power1 is the source of truth. Local relay state mirrors actual North Lights state.
   - platform: gpio
     name: "Relay 2: ${switch_2_name}"
     pin: GPIO12
@@ -343,11 +485,25 @@ switch:
           topic: "${mqtt_local_status_topic1}/state"
           payload: "On"
           retain: true
+      - if:
+          condition:
+            lambda: 'return !id(north_update_from_tasmota);'
+          then:
+            - mqtt.publish:
+                topic: "${north_lights_tasmota_command_topic}"
+                payload: "ON"
     on_turn_off:
       - mqtt.publish:
           topic: "${mqtt_local_status_topic1}/state"
           payload: "Off"
           retain: true
+      - if:
+          condition:
+            lambda: 'return !id(north_update_from_tasmota);'
+          then:
+            - mqtt.publish:
+                topic: "${north_lights_tasmota_command_topic}"
+                payload: "OFF"
 
   # Relay 3 (GPIO14) - unused output, intentionally not exposed to Home Assistant.
   # Button 3 controls the bedside lamp via Home Assistant/API instead.