stair light control + pther fixes

esphome/common/network_common.yaml

@@ -71,6 +71,7 @@ ota:
   - platform: esphome
     password: ${local_ota_pass}
     version: 2
+  #- platform: web_server
 
 #############################################
 # Safe Mode

esphome/esp-centralstairs-bottom.yaml

@@ -0,0 +1,248 @@
+##########################################################################################
+##########################################################################################
+# CENTRAL STAIRS - BOTTOM LIGHTSWITCH
+# V3.7 2025-09-24 upload to this device
+# V3.5 2025-07-24 YAML tidyups
+##########################################################################################
+# Zemismart KS-811 Double push button
+# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
+#
+# NOTES
+# - Light switch at top of the stairs, only the footer lights physically connected.
+#
+##########################################################################################
+##########################################################################################
+
+##########################################################################################
+# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
+# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+##########################################################################################
+substitutions:
+  # Device Naming 
+  device_name: "esp-centralstairs-bottom"
+  friendly_name: "Central Stair Lightswitch - Bottom (2)"
+  description_comment: "Central Stair Lightswitch - Bottom, using Zemismart KS-811 Double Push Button. Main Stair Lights (1), Stair Footer Lights (2)"
+  device_area: "" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
+
+  # Project Naming
+  project_name: "Zemismart Technologies.KS-811 Double" # Project Details 
+  project_version: "v3.7"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+
+  # Passwords & Secrets (unfortunately you can't use substitutions inside secrets names)
+  api_key: !secret esp-api_key 
+  ota_pass: !secret esp-ota_pass
+  static_ip_address: !secret esp-centralstairs-bottom_ip
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic
+
+  # Device Settings
+  #relay_icon: "mdi:lightbulb-group"
+  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
+  update_interval: "60s" # update time for for general sensors etc
+
+  # MQTT LOCAL Controls
+  mqtt_local_device_name: "stair-mainlights-lower"
+  mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_local_device_name}/set" # Topic we will use to command this locally without HA
+  mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_local_device_name}/state" # Topic we will use to view status locally without HA
+  mqtt_local_device_command_ON: "ON"
+  mqtt_local_device_command_OFF: "OFF"
+
+  # MQTT REMOTE Controls
+  mqtt_remote_device1_name: "stair-footerlights"
+  mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}/set"
+  mqtt_remote_device1_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device1_name}/state"
+  #mqtt_remote_device2_name: "stair-mainlights-upper"
+  #mqtt_remote_device2_command_topic: "${mqtt_local_command_main_topic}/${mqtt_remote_device2_name}/relay3/set"
+  #mqtt_remote_device2_status_topic: "${mqtt_local_status_main_topic}/${mqtt_remote_device2_name}/relay3/state"
+  mqtt_remote_device_command_ON: "ON"
+  mqtt_remote_device_command_OFF: "OFF"
+
+  # Switch Naming
+  switch_1_name: "Main Stair Lights (Lower)" # Physical, but just the lower lights below the media cabinet
+  switch_2_name: "Stair Footer Lights" # virtual only, nothing connected to this output
+  #switch_3_name:  "Nil"
+
+#########################################################################################
+# PACKAGES: Included Common Packages
+# https://esphome.io/components/packages.html
+##########################################################################################
+packages:
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+  common_api: !include
+    file: common/api_common.yaml
+    vars:
+      local_api_key: "${api_key}"
+  #common_webportal: !include
+  #  file: common/webportal_common.yaml
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+  common_sntp: !include
+    file: common/sntp_common.yaml
+  common_general_sensors: !include
+    file: common/sensors_common.yaml
+    vars:
+      local_friendly_name: "${friendly_name}"
+      local_update_interval: "${update_interval}"
+
+#########################################################################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#########################################################################################
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}" # Appears on the esphome page in HA
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+  #on_boot:       
+  #  priority: 200
+  #  then:
+  #    - switch.turn_on: Relay_2
+
+#########################################################################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#########################################################################################
+esp8266:
+  board: esp01_1m
+  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
+  board_flash_mode: dout # Default is dout
+
+#########################################################################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+##########################################################################################
+# MQTT COMMANDS
+# This adds device-specific MQTT command triggers to the common MQTT configuration.
+##########################################################################################
+mqtt:
+  on_connect:
+    then:
+      - if:
+          condition:
+            lambda: 'return id(Relay_1).state;'
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_local_status_topic}"
+                payload: "${mqtt_local_device_command_ON}"
+                qos: 0
+                retain: false
+          else:
+            - mqtt.publish:
+                topic: "${mqtt_local_status_topic}"
+                payload: "${mqtt_local_device_command_OFF}"
+                qos: 0
+                retain: false
+  on_message:
+    # Light control to turn on relay 1
+    - topic: "${mqtt_local_command_topic}"
+      payload: "${mqtt_local_device_command_ON}"
+      then:
+        - switch.turn_on: Relay_1
+    # Light control to turn off relay 1
+    - topic: "${mqtt_local_command_topic}"
+      payload: "${mqtt_local_device_command_OFF}"
+      then:
+        - switch.turn_off: Relay_1
+    - topic: "${mqtt_remote_device1_status_topic}"
+      payload: "${mqtt_local_device_command_ON}"
+      then:
+        - switch.turn_on: Relay_2
+    # Light control to turn off relay 2
+    - topic: "${mqtt_remote_device1_status_topic}"
+      payload: "${mqtt_local_device_command_OFF}"
+      then:
+        - switch.turn_off: Relay_2
+
+#########################################################################################
+# STATUS LED
+# https://esphome.io/components/status_led.html
+#########################################################################################
+status_led:
+  pin:
+    number: GPIO2
+    inverted: yes
+
+#########################################################################################
+# BINARY SENSORS
+# https://esphome.io/components/binary_sensor/
+#########################################################################################
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO16
+      mode: INPUT
+      inverted: True
+    filters:
+      - delayed_on: 30ms
+      - delayed_off: 30ms
+    name: "Button 1: ${switch_1_name}"
+    on_press:
+      - switch.toggle: Relay_1
+
+  - platform: gpio
+    pin:
+      number: GPIO05
+      mode: INPUT
+      inverted: True
+    filters:
+      - delayed_on: 30ms
+      - delayed_off: 30ms
+    name: "Button 2: ${switch_2_name}"
+    on_press:
+      # Toggle the remote Footer Lights via COMMAND topic, based on our mirrored state
+      - if:
+          condition:
+            lambda: 'return id(Relay_2).state;'
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_remote_device1_command_topic}"
+                payload: "${mqtt_remote_device_command_OFF}"
+                retain: false
+          else:
+            - mqtt.publish:
+                topic: "${mqtt_remote_device1_command_topic}"
+                payload: "${mqtt_remote_device_command_ON}"
+                retain: false
+
+#########################################################################################
+# SWITCH COMPONENT
+# https://esphome.io/components/switch/
+#########################################################################################
+switch:
+  - platform: gpio
+    name: "Relay 1: ${switch_1_name}"
+    pin: GPIO13
+    id: Relay_1
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_local_status_topic}"
+          payload: "${mqtt_local_device_command_ON}"
+          retain: false
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_local_status_topic}"
+          payload: "${mqtt_local_device_command_OFF}"
+          retain: false
+
+  - platform: gpio
+    name: "Relay 2: ${switch_2_name}"
+    pin: GPIO12
+    id: Relay_2
+    # No mqtt.publish here (this is a mirror only)

esphome/esp-centralstairs-top.yaml

@@ -0,0 +1,232 @@
+##########################################################################################
+##########################################################################################
+# CENTRAL STAIRS - TOP LIGHTSWITCH
+# V3.7 2025-09-24 upload to this device
+# V3.5 2025-07-24 YAML tidyups
+##########################################################################################
+# Zemismart KS-811 Double push button
+# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
+#
+# NOTES
+# - Light switch at top of the stairs
+#
+##########################################################################################
+##########################################################################################
+
+##########################################################################################
+# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
+# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+##########################################################################################
+substitutions:
+  # Device Naming 
+  device_name: "esp-centralstairs-top"
+  friendly_name: "Central Stair Lightswitch - Top (2)"
+  description_comment: "Central Stair Lightswitch - Top, using Zemismart KS-811 Double Push Button. Main Stair Lights (1), Stair Footer Lights (2)"
+  device_area: "" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
+
+  # Project Naming
+  project_name: "Zemismart Technologies.KS-811 Double" # Project Details 
+  project_version: "v3.7"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+
+  # Passwords & Secrets (unfortunately you can't use substitutions inside secrets names)
+  api_key: !secret esp-api_key 
+  ota_pass: !secret esp-ota_pass
+  static_ip_address: !secret esp-centralstairs-top_ip
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic
+
+  # Device Settings
+  #relay_icon: "mdi:lightbulb-group"
+  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
+  update_interval: "60s" # update time for for general sensors etc
+
+  # MQTT LOCAL Controls
+  mqtt_local_device_name: "stair-footerlights"
+  mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_local_device_name}/set" # Topic we will use to command this locally without HA
+  mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_local_device_name}/state" # Topic we will use to view status locally without HA
+  mqtt_local_device_command_ON: "ON"
+  mqtt_local_device_command_OFF: "OFF"
+
+  # MQTT REMOTE Controls
+  mqtt_remote_device1_name: "stair-mainlights-lower"
+  mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}/set"
+  mqtt_remote_device1_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device1_name}/state"
+  #mqtt_remote_device2_name: "stair-mainlights-upper"
+  #mqtt_remote_device2_command_topic: "${mqtt_local_command_main_topic}/${mqtt_remote_device2_name}/relay3/set"
+  #mqtt_remote_device2_status_topic: "${mqtt_local_status_main_topic}/${mqtt_remote_device2_name}/relay3/state"
+  mqtt_remote_device_command_ON: "ON"
+  mqtt_remote_device_command_OFF: "OFF"
+  
+  # Switch Naming
+  switch_1_name: "Main Stair Lights" # virtual only, nothing connected to this output
+  switch_2_name: "Stair Footer Lights"
+
+#########################################################################################
+# PACKAGES: Included Common Packages
+# https://esphome.io/components/packages.html
+##########################################################################################
+packages:
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+  common_api: !include
+    file: common/api_common.yaml
+    vars:
+      local_api_key: "${api_key}"
+  #common_webportal: !include
+  #  file: common/webportal_common.yaml
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+  common_sntp: !include
+    file: common/sntp_common.yaml
+  common_general_sensors: !include
+    file: common/sensors_common.yaml
+    vars:
+      local_friendly_name: "${friendly_name}"
+      local_update_interval: "${update_interval}"
+
+#########################################################################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#########################################################################################
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}" # Appears on the esphome page in HA
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+  #on_boot:       
+  #  priority: 200
+  #  then:
+  #    - switch.turn_on: Relay_2
+
+#########################################################################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#########################################################################################
+esp8266:
+  board: esp01_1m
+  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
+  board_flash_mode: dout # Default is dout
+
+#########################################################################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+##########################################################################################
+# MQTT COMMANDS
+# This adds device-specific MQTT command triggers to the common MQTT configuration.
+##########################################################################################
+mqtt:
+  on_message:
+    # Light control to turn on relay 2
+    - topic: "${mqtt_local_command_topic}"
+      payload: "${mqtt_local_device_command_ON}"
+      then:
+        - switch.turn_on: Relay_2
+    # Light control to turn off relay 2
+    - topic: "${mqtt_local_command_topic}"
+      payload: "${mqtt_local_device_command_OFF}"
+      then:
+        - switch.turn_off: Relay_2
+    - topic: "${mqtt_remote_device1_status_topic}"
+      payload: "${mqtt_local_device_command_ON}"
+      then:
+        - switch.turn_on: Relay_1
+    # Light control to turn off relay 2
+    - topic: "${mqtt_remote_device1_status_topic}"
+      payload: "${mqtt_local_device_command_OFF}"
+      then:
+        - switch.turn_off: Relay_1
+
+#########################################################################################
+# STATUS LED
+# https://esphome.io/components/status_led.html
+#########################################################################################
+status_led:
+  pin:
+    number: GPIO2
+    inverted: yes
+
+#########################################################################################
+# BINARY SENSORS
+# https://esphome.io/components/binary_sensor/
+#########################################################################################
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO16
+      mode: INPUT
+      inverted: True
+    filters:
+      - delayed_on: 30ms
+      - delayed_off: 30ms
+    name: "Button 1: ${switch_1_name}"
+    on_press:
+      # Toggle the remote Main Stair Lights (lower) via COMMAND topic, based on our mirrored state
+      - if:
+          condition:
+            lambda: 'return id(Relay_1).state;'
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_remote_device1_command_topic}"
+                payload: "${mqtt_remote_device_command_OFF}"
+                retain: false
+          else:
+            - mqtt.publish:
+                topic: "${mqtt_remote_device1_command_topic}"
+                payload: "${mqtt_remote_device_command_ON}"
+                retain: false
+
+  - platform: gpio
+    pin:
+      number: GPIO05
+      mode: INPUT
+      inverted: True
+    filters:
+      - delayed_on: 30ms
+      - delayed_off: 30ms
+    name: "Button 2: ${switch_2_name}"
+    on_press:
+      - switch.toggle: Relay_2
+
+#########################################################################################
+# SWITCH COMPONENT
+# https://esphome.io/components/switch/
+#########################################################################################
+switch:
+  - platform: gpio
+    name: "Relay 1: ${switch_1_name}"
+    pin: GPIO13
+    id: Relay_1
+    # No mqtt.publish here (this is a mirror only)
+
+  - platform: gpio
+    name: "Relay 2: ${switch_2_name}"
+    pin: GPIO12
+    id: Relay_2
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_local_status_topic}"
+          payload: "${mqtt_local_device_command_ON}"
+          retain: false
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_local_status_topic}"
+          payload: "${mqtt_local_device_command_OFF}"
+          retain: false
+
+

esphome/esp-entmulti.yaml

@@ -287,21 +287,6 @@ sensor:
 #      accuracy_decimals: 1     
 #      oversampling: 2x
 
-  ################################
-  # WIFI SIGNAL
-  # Quality of Wifi in dBm
-  # https://esphome.io/components/sensor/wifi_signal.html
-  ################################
-  - platform: wifi_signal
-    name: ${friendly_name} WiFi Signal
-    update_interval: 20s
-    #retain: true #retain useful if sleeping
-
-  - platform: uptime
-    name: ${friendly_name} Uptime
-    update_interval: 20s
-
-
 #The ld2410 sensor values
   - platform: ld2410
     light:
@@ -418,7 +403,7 @@ binary_sensor:
       number: GPIO13
       mode:
         input: True
-        pullup: False
+        pullup: True
       inverted: True
     filters: 
       - delayed_on: 50ms

esphome/esp-entrancebathrmlights.yaml

@@ -0,0 +1,181 @@
+##########################################################################################
+##########################################################################################
+# ENTRANCE BATHROOM LIGHTSWITCH
+# V3.7 2025-09-34 upload to this bathroom
+# V3.5 2025-07-24 YAML tidyups
+##########################################################################################
+# Zemismart KS-811 Double push button
+# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
+#
+# NOTES
+# - Light switch with light and extract fan
+#
+##########################################################################################
+##########################################################################################
+
+##########################################################################################
+# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
+# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+##########################################################################################
+substitutions:
+  # Device Naming 
+  device_name: "esp-entrancebathrmlights"
+  friendly_name: "Entrance Bathroom Lightswitch (2)"
+  description_comment: "Entrance bathroom lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Extract Fan (2)"
+  device_area: "Entranceway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
+
+  # Project Naming
+  project_name: "Zemismart Technologies.KS-811 Double" # Project Details 
+  project_version: "v3.5"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+
+  # Passwords & Secrets
+  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
+  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
+  static_ip_address: !secret esp-entrancebathrmlights_ip
+  #mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
+  #mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
+
+  # Device Settings
+  #relay_icon: "mdi:lightbulb-group"
+  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
+  update_interval: "60s" # update time for for general sensors etc
+
+  # MQTT LOCAL Controls
+  #mqtt_device_name: "bedroom2-lights"
+  #mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
+  #mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
+
+  # Switch Naming
+  switch_1_name: "Main Lights"
+  switch_2_name: "Extract Fan"
+  #switch_3_name:  "Nil"
+
+#########################################################################################
+# PACKAGES: Included Common Packages
+# https://esphome.io/components/packages.html
+##########################################################################################
+packages:
+  common_wifi: !include
+    file: common/network_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+      local_static_ip_address: "${static_ip_address}"
+      local_ota_pass: "${ota_pass}"
+  common_api: !include
+    file: common/api_common.yaml
+    vars:
+      local_api_key: "${api_key}"
+  #common_webportal: !include
+  #  file: common/webportal_common.yaml
+  common_mqtt: !include
+    file: common/mqtt_common.yaml
+    vars:
+      local_device_name: "${device_name}"
+  common_sntp: !include
+    file: common/sntp_common.yaml
+  common_general_sensors: !include
+    file: common/sensors_common.yaml
+    vars:
+      local_friendly_name: "${friendly_name}"
+      local_update_interval: "${update_interval}"
+
+#########################################################################################
+# ESPHome
+# https://esphome.io/components/esphome.html
+#########################################################################################
+esphome:
+  name: "${device_name}"
+  friendly_name: "${friendly_name}"
+  comment: "${description_comment}" # Appears on the esphome page in HA
+  area: "${device_area}"
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+  #on_boot:       
+  #  priority: 200
+  #  then:
+  #    - switch.turn_on: Relay_2
+
+#########################################################################################
+# ESP Platform and Framework
+# https://esphome.io/components/esp32.html
+#########################################################################################
+esp8266:
+  board: esp01_1m
+  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
+  board_flash_mode: dout # Default is dout
+
+#########################################################################################    
+# ESPHome Logging Enable
+# https://esphome.io/components/logger.html
+############################################# 
+logger:
+  level: "${log_level}"  #INFO Level suggested, or DEBUG for testing
+  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
+  #esp8266_store_log_strings_in_flash: false
+  #tx_buffer_size: 64
+
+#########################################################################################
+# STATUS LED
+# https://esphome.io/components/status_led.html
+#########################################################################################
+status_led:
+  pin:
+    number: GPIO2
+    inverted: yes
+
+#########################################################################################
+# BINARY SENSORS
+# https://esphome.io/components/binary_sensor/
+#########################################################################################
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO16
+      mode: INPUT
+      inverted: True
+    name: "Button 1: ${switch_1_name}"
+    on_press:
+      - switch.toggle: Relay_1
+
+  - platform: gpio
+    pin:
+      number: GPIO05
+      mode: INPUT
+      inverted: True
+    name: "Button 2: ${switch_2_name}"
+    on_press:
+      - switch.toggle: Relay_2
+
+# KS-811-2 is a double only
+#  - platform: gpio
+#    pin:
+#      number: GPIO4
+#      mode: INPUT
+#      inverted: True
+#    name: "Button 3: ${switch_3_name}"
+#    on_press:
+#      - switch.toggle: Relay_3
+
+#########################################################################################
+# SWITCH COMPONENT
+# https://esphome.io/components/switch/
+#########################################################################################
+switch:
+  - platform: gpio
+    name: "Relay 1: ${switch_1_name}"
+    pin: GPIO13
+    id: Relay_1
+
+  - platform: gpio
+    name: "Relay 2: ${switch_2_name}"
+    pin: GPIO12
+    id: Relay_2
+
+# KS-811-2 is a double only
+#  - platform: gpio
+#    name: "Relay 3: ${switch_3_name}"
+#    pin: GPIO14
+#    id: Relay_3
+
+

esphome/esp-occupancystair.yaml

@@ -1,7 +1,8 @@
-#############################################
+##########################################################################################
-#############################################
+##########################################################################################
 # HiLink LD2410 mmWave sensor, with BME280 Temp/Hum/Pres Sensor and PIR on an ESP32
 # VERSION
+# V2.1 2025-08-25 Added some MQTT to send commands to turn on remote lights
 # V2.0 2025-06-05 YAML Tidyups
 #
 # https://github.com/patrick3399/Hi-Link_mmWave_Radar_ESPHome/tree/main
@@ -11,13 +12,13 @@
 # https://www.simplysmart.house/blog/presence-detection-ld2410-home-assistant
 # 
 # The B and C versions of this device can use Bluetooth, but we are not using it here.
-#############################################
+##########################################################################################
-#############################################
+##########################################################################################
 
-#############################################
+##########################################################################################
 # SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
 # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
-#############################################
+##########################################################################################
 substitutions:
   # Device Naming
   device_name: "esp-occupancystair"
@@ -27,21 +28,31 @@ substitutions:
 
   # Project Naming
   project_name: "Generic.ESP32" # Project Details 
-  project_version: "v1.0"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+  project_version: "v2.1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
 
-  # Passwords
+  # Passwords & Secrets (unfortunately you can't use substitutions inside secrets names)
-  api_key: !secret esp-occupancystair_api_key # unfortunately you can't use substitutions inside secrets names
+  api_key: !secret esp-api_key 
-  ota_pass: !secret esp-occupancystair_ota_pass # unfortunately you can't use substitutions inside secrets names
+  ota_pass: !secret esp-ota_pass
   static_ip_address: !secret esp-occupancystair_ip
-  
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_status_main_topic: !secret mqtt_status_main_topic
+
   # Device Settings
+  #relay_icon: "mdi:lightbulb-group"
   log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
   update_interval: "60s" # update time for for general sensors etc
+  
+  # MQTT REMOTE Controls
+  mqtt_remote_device1_name: "stair-footerlights"
+  mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}/set"
+  #mqtt_remote_device1_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device1_name}/state"
+  mqtt_remote_device_command_ON: "ON"
+  mqtt_remote_device_command_OFF: "OFF"
  
-#############################################
+#########################################################################################
-# Included Common Packages
+# PACKAGES: Included Common Packages
-# https://esphome.io/components/esphome.html
+# https://esphome.io/components/packages.html
-#############################################
+##########################################################################################
 packages:
   common_wifi: !include
     file: common/network_common.yaml
@@ -67,10 +78,10 @@ packages:
       local_friendly_name: "${friendly_name}"
       local_update_interval: "${update_interval}"
 
-#############################################
+##########################################################################################
-# ESPHome
+# ESPHome CORE CONFIGURATION
 # https://esphome.io/components/esphome.html
-#############################################
+##########################################################################################
 esphome:
   name: "${device_name}"
   friendly_name: "${friendly_name}"
@@ -81,55 +92,67 @@ esphome:
     #priority: -200
     #then:
 
-#############################################
+##########################################################################################
-# ESP Platform and Framework
+# ESP PLATFORM AND FRAMEWORK
+# https://esphome.io/components/esp8266.html
 # https://esphome.io/components/esp32.html
-#############################################
+##########################################################################################
 esp32:
   board: esp32dev
   framework:
     type: esp-idf  # "esp-idf" OR "arduino". Suggested ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
     version: recommended # recommended, latest or dev
 
-#############################################
+##########################################################################################
-# i2s bus
+# GLOBAL VARIABLES
+# https://esphome.io/components/globals.html
+##########################################################################################
+globals:
+  - id: stair_footer_auto_default_s
+    type: int
+    restore_value: yes
+    initial_value: '20'
+
+##########################################################################################
+# i2c BUS COMPONENT
 # https://esphome.io/components/i2c.html
-#############################################
+##########################################################################################
 i2c:
   sda: GPIO19
   scl: GPIO21
   scan: True
   frequency: 100kHz #10, 50, 100, 200, 800 are possible settings, 100kHz was reliable for me
 
-#############################################    
+##########################################################################################    
-# ESPHome Logging Enable
+# LOGGER COMPONENT
 # https://esphome.io/components/logger.html
-############################################# 
+# Logs all log messages through the serial port and through MQTT topics.
+########################################################################################## 
 logger:
   level: INFO  # INFO Level suggested, or DEBUG for testing
   baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
   #esp8266_store_log_strings_in_flash: false
   #tx_buffer_size: 64
 
-#############################################    
+##########################################################################################    
-# Bluetooth
+# BLUETOOTH
-# https://esphome.io/components/bluetooth_proxy.html
+# Proxy https://esphome.io/components/bluetooth_proxy.html
-# https://esphome.io/components/esp32_ble_tracker.html
+# BLE https://esphome.io/components/esp32_ble_tracker.html
 # Remember that this takes a LOT of processing. On the 
 # ESP32, enable the  IDF framework, and disable the 
 # Web server component.  Changing to the IDF framework 
 # needs to be via cable not OTA to change the
 # partition setup.
-#############################################  
+##########################################################################################  
 #bluetooth_proxy:
 
 #esp32_ble_tracker:
 
-#############################################
+##########################################################################################
-# UART Serial
+# UART BUS
-# hardware on EPS32, but software, and can be glitchy on ESP8266
+# hardware on EPS32, but software (and can be glitchy) on ESP8266
-# https://esphome.io/components/uart.html?highlight=uart
+# https://esphome.io/components/uart.html
-#############################################
+##########################################################################################
 uart:
   id: ld2410_uart
   rx_pin: GPIO16  #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang
@@ -139,21 +162,23 @@ uart:
   stop_bits: 1
   parity: NONE
 
-#############################################
+#########################################################################################
-# General esp status LED
+# STATUS LED
 # https://esphome.io/components/status_led.html
-#############################################
+#########################################################################################
+# ESP32 D1 Mini Board: Onboard Status LED on GPIO2, active-low
+#########################################################################################
 status_led:
   pin:
-    number: GPIO2 #ESP32 Onboard LED
+    number: GPIO2 # ESP32 Onboard LED
     ignore_strapping_warning: True #https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
     inverted: false
 
-#############################################
+##########################################################################################
 # LD2410 Sensors
 # https://esphome.io/components/sensor/ld2410.html
 # https://www.hlktech.net/index.php?id=988
-#############################################
+##########################################################################################
 ld2410:
   uart_id: ld2410_uart
   #uart_id (Optional, ID): Manually specify the ID of the UART Component if you want to use multiple UART buses.
@@ -171,6 +196,11 @@ ld2410:
   #still_energy (Optional, int): When in engineering mode, the still energy of the gate, otherwise unknown. Value between 0 and 100 inclusive. All options from Sensor.
 #ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
 
+
+##########################################################################################
+# NUMBER COMPONENT
+# https://esphome.io/components/number/
+##########################################################################################
 #The ld2410 number values for setting thresholds
 #  timeout: 5s
 #  max_move_distance: 2.25m
@@ -249,12 +279,34 @@ number:
       still_threshold:
         name: "g8 still threshold"
 
-#The ld2410 select allows you to control your LD2410 Sensor.
+  - platform: template
-#distance_resolution (Optional): Control the gates distance resolution. Can be 0.75m or 0.2m. Defaults to 0.75m. All options from Select.
+    id: stair_footer_auto_time_s
-#baud_rate (Optional): Control the serial port baud rate. Defaults to 256000. Once changed, all sensors will stop working until a fresh install with an updated UART Component configuration. All options from Select.
+    name: "Stair Footer Lights Auto Time"
-#light_function (Optional): If set, will affect the OUT pin value, based on light threshold. Can be off, low or above. Defaults to off. All options from Select.
+    unit_of_measurement: s
-#out_pin_level (Optional): Control OUT pin away value. Can be low or high. Defaults to low. All options from Select.
+    min_value: 10
-#ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component if you are using multiple components.
+    max_value: 300
+    step: 1
+    optimistic: true
+    restore_value: true
+    initial_value: 20
+
+#########################################################################################
+# SELECT COMPONENT
+# https://esphome.io/components/select/index.html
+#########################################################################################
+# LD2410 SELECT
+# distance_resolution (Optional): Control the gates distance resolution. Can be 0.75m or 0.2m. 
+#   Defaults to 0.75m. All options from Select.
+# baud_rate (Optional): Control the serial port baud rate. Defaults to 256000. Once changed, 
+#   all sensors will stop working until a fresh install with an updated UART Component 
+#   configuration. All options from Select.
+# light_function (Optional): If set, will affect the OUT pin value, based on light 
+#   threshold. Can be off, low or above. Defaults to off. All options from Select.
+# out_pin_level (Optional): Control OUT pin away value. Can be low or high. Defaults 
+#   to low. All options from Select.
+# ld2410_id (Optional, ID): Manually specify the ID for the LD2410 Sensor component
+#   if you are using multiple components.
+#########################################################################################
 select:
   - platform: ld2410
     distance_resolution: 
@@ -266,10 +318,10 @@ select:
     out_pin_level:
       name: "${friendly_name} LD2140 Out Pin Level"
 
-#############################################
+##########################################################################################
-# General Sensors 
+# SENSOR COMPONENT
-# https://esphome.io/components/sensor/index.html
+# https://esphome.io/components/sensor/
-#############################################
+##########################################################################################
 sensor:
   - platform: bme280_i2c
     temperature:
@@ -286,7 +338,8 @@ sensor:
     address: 0x76
     update_interval: "${update_interval}"   
 
-#The ld2410 sensor values
+  # The ld2410 sensor values
+  # https://esphome.io/components/sensor/ld2410/#sensor
   - platform: ld2410
     light:
       name: "Light"
@@ -346,29 +399,59 @@ sensor:
       still_energy:
         name: "g8 still energy"
 
+##########################################################################################
+# SWITCH COMPONENT
+# https://esphome.io/components/switch/
+##########################################################################################
 # The ld2410 switch allows you to control your LD2410 Sensor.
-#Bluetooth switch is only useful of you have a B or C model
+# Bluetooth switch is only useful of you have a B or C model
+##########################################################################################
 switch:
+  # https://esphome.io/components/sensor/ld2410/#switch
   - platform: ld2410
     engineering_mode:
       name: "${friendly_name} LD2140 Engineering Mode"
     #bluetooth:
       #name: "${friendly_name} LD2140 Control Bluetooth"
 
-#The ld2410 binary sensors to get presence notification
+  - platform: template
+    id: stair_footer_auto_enabled
+    name: "Stair Footer Lights Auto"
+    optimistic: true
+    restore_mode: RESTORE_DEFAULT_ON
+
+#########################################################################################
+# BINARY SENSORS
+# https://esphome.io/components/binary_sensor/
+#########################################################################################
 binary_sensor:
+  # The ld2410 binary sensors to get presence notification
+  # https://esphome.io/components/sensor/ld2410/#binary-sensor
   - platform: ld2410
     has_target:
       name: "mmWave Presence"
+      on_press:
+        - if:
+            condition:
+              switch.is_on: stair_footer_auto_enabled
+            then:
+              - script.execute: stair_footer_auto_script
     has_moving_target:
       name: "mmWave Moving Target"
+      on_press:
+        - if:
+            condition:
+              switch.is_on: stair_footer_auto_enabled
+            then:
+              - script.execute: stair_footer_auto_script
     has_still_target:
       name: "mmWave Still Target"
     out_pin_presence_status:
       name: "LD2140 Out Pin Presence Status"
       entity_category: diagnostic
 
-#Standard PIR Sensor
+# Generic PIR Sensor
+# https://devices.esphome.io/devices/Generic-PIR
   - platform: gpio
     pin:
       number: GPIO13
@@ -378,8 +461,21 @@ binary_sensor:
       inverted: true
     name: "PIR Sensor"
     device_class: motion
+    filters:
+      - delayed_on: 50ms
+    on_press:
+      - if:
+          condition:
+            switch.is_on: stair_footer_auto_enabled
+          then:
+            - script.execute: stair_footer_auto_script
 
-#The ld2410 button allows resetting
+#################################################################################################
+# BUTTON COMPONENT
+# https://esphome.io/components/button/index.html
+#################################################################################################
+# The ld2410 button allows resetting
+#################################################################################################
 button:
   - platform: ld2410
     factory_reset:
@@ -389,13 +485,41 @@ button:
     query_params:
       name: "Query Parameters"
 
-#The ld2410 text sensor allows you to get information about your LD2410 Sensor.
+#################################################################################################
-#Bluetooth sensor is only useful of you have a B or C model
+# TEXT SENSOR COMPONENT
+# https://esphome.io/components/text_sensor/
+#################################################################################################
 text_sensor:
+  # The ld2410 text sensor allows you to get information about your LD2410 Sensor.
+  # Bluetooth sensor is only useful of you have a B or C model
+  # https://esphome.io/components/sensor/ld2410/#text-sensor
   - platform: ld2410
     version:
       name: "${friendly_name} LD2140 Firmware Version"
     #mac_address:
       #name: "${friendly_name} LD2140 BT MAC Address"
 
+##########################################################################################
+# SCRIPT COMPONENT
+# https://esphome.io/components/script.html
+# Scripts can be executed nearly anywhere in your device configuration with a single call.
+##########################################################################################
+script:
+  # Sends commands to turn on and off a remote light
+  - id: stair_footer_auto_script
+    mode: restart
+    then:
+      # Turn lights on (command the Top switch's footer relay)
+      - mqtt.publish:
+          topic: "${mqtt_remote_device1_command_topic}"
+          payload: "${mqtt_remote_device_command_ON}"
+          retain: false
 
+      # Wait for the HA-adjustable timeout
+      - delay: !lambda 'return (uint32_t)(id(stair_footer_auto_time_s).state) * 1000;'
+
+      # Turn lights back off
+      - mqtt.publish:
+          topic: "${mqtt_remote_device1_command_topic}"
+          payload: "${mqtt_remote_device_command_OFF}"
+          retain: false

packages/health_checks.yaml

@@ -20,17 +20,17 @@ mqtt:
       device_class: connectivity
       qos: 1
       # Optional: avoid stale 'online' if no updates arrive
-      expire_after: 300
+      expire_after: 180
 
 # ---- Combine them (true if either is up) ----
 template:
   - binary_sensor:
-      - name: "Node-RED Panda Up"
+      - name: "Node-RED Panda Up (HTTP/MQTT)"
         unique_id: "nodered_panda_up_combined"
         device_class: connectivity
         state: >
           {{ is_state('binary_sensor.node_red_panda_up_http','on')
-             or is_state('binary_sensor.node_red_panda_up_mqtt','on') }}
+            or is_state('binary_sensor.node_red_panda_up_mqtt','on') }}
         availability: >
           {{ states('binary_sensor.node_red_panda_up_http') not in ['unknown','unavailable']
-             or states('binary_sensor.node_red_panda_up_mqtt') not in ['unknown','unavailable'] }}
+            or states('binary_sensor.node_red_panda_up_mqtt') not in ['unknown','unavailable'] }}

packages/openbeken.yaml

@@ -1,5 +1,5 @@
 mqtt:
-  switch: 
+  switch:
     - unique_id: "Garage_Entry_Switch_1"
       name: "Garage Entry Switch 1"
       state_topic: "obk/obk-ks811t-006D-garageentry/1/get"
@@ -30,33 +30,33 @@ mqtt:
       retain: true
       availability:
         - topic: "obk/obk-ks811t-006D-garageentry/connected"
-    - unique_id: "Main_Bathroom_Light_Switch_1"
+#    - unique_id: "Main_Bathroom_Light_Switch_1"
-      name: "Main Bathroom Light Switch 1"
+#      name: "Main Bathroom Light Switch 1"
-      state_topic: "obk/obk-ks811t-B1C4-mainbath1/1/get"
+#      state_topic: "obk/obk-ks811t-B1C4-mainbath1/1/get"
-      command_topic: "obk/obk-ks811t-B1C4-mainbath1/1/set"
+#      command_topic: "obk/obk-ks811t-B1C4-mainbath1/1/set"
-      qos: 1
+#      qos: 1
-      payload_on: 1
+#      payload_on: 1
-      payload_off: 0
+#      payload_off: 0
-      retain: true
+#      retain: true
-      availability:
+#      availability:
-        - topic: "obk/obk-ks811t-B1C4-mainbath1/connected"
+#        - topic: "obk/obk-ks811t-B1C4-mainbath1/connected"
-    - unique_id: "Main_Bathroom_Light_Switch_2"
+#    - unique_id: "Main_Bathroom_Light_Switch_2"
-      name: "Main Bathroom Light Switch 2"
+#      name: "Main Bathroom Light Switch 2"
-      state_topic: "obk/obk-ks811t-B1C4-mainbath1/2/get"
+#      state_topic: "obk/obk-ks811t-B1C4-mainbath1/2/get"
-      command_topic: "obk/obk-ks811t-B1C4-mainbath1/2/set"
+#      command_topic: "obk/obk-ks811t-B1C4-mainbath1/2/set"
-      qos: 1
+#      qos: 1
-      payload_on: 1
+#      payload_on: 1
-      payload_off: 0
+#      payload_off: 0
-      retain: true
+#      retain: true
-      availability:
+#      availability:
-        - topic: "obk/obk-ks811t-B1C4-mainbath1/connected"
+#        - topic: "obk/obk-ks811t-B1C4-mainbath1/connected"
-    - unique_id: "Main_Bathroom_Light_Switch_3"
+#    - unique_id: "Main_Bathroom_Light_Switch_3"
-      name: "Main Bathroom Light Switch 3"
+#      name: "Main Bathroom Light Switch 3"
-      state_topic: "obk/obk-ks811t-B1C4-mainbath1/3/get"
+#      state_topic: "obk/obk-ks811t-B1C4-mainbath1/3/get"
-      command_topic: "obk/obk-ks811t-B1C4-mainbath1/3/set"
+#      command_topic: "obk/obk-ks811t-B1C4-mainbath1/3/set"
-      qos: 1
+#      qos: 1
-      payload_on: 1
+#      payload_on: 1
-      payload_off: 0
+#      payload_off: 0
-      retain: true
+#      retain: true
-      availability:
+#      availability:
-        - topic: "obk/obk-ks811t-B1C4-mainbath1/connected"
+#        - topic: "obk/obk-ks811t-B1C4-mainbath1/connected"

packages/simulation_lights.yaml

@@ -3,7 +3,6 @@ group:
     name: Simulation Lights (All)
     entities:
       - switch.tasmo_ks811d_1242_entrance_a
-      - switch.tasmo_ks811d_0302_entrybath_a
       - switch.tasmo_ks811d_6110_kitchen_a
       - switch.tasmo_ks811d_6110_kitchen_b
       - switch.main_hallway_lightswitch_tasmo_ks811s_2940_hallway_1a
@@ -11,4 +10,5 @@ group:
       - switch.tasmo_ks811t_0702_lounge_3a
       - switch.tasmo_ks811t_0702_lounge_3b
       - switch.tasmo_ks811t_0702_lounge_3c
+      - switch.esp_entrancebathrmlights_relay_1_main_lights
       - group.downstairs_flat_lights # ← now valid here