Edit esp-reterminal-e1001.yaml

esphome/esp-reterminal-e1001.yaml

@@ -6,6 +6,8 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-reterminal-e1001.yaml
 #:########################################################################################:#
 # VERSIONS:
+# V0.8.0 2026-07-30 Removed the Appliances page and page-selection state; both white
+#                    buttons now show and check the single seven-job Jobs page.
 # V0.7.0 2026-07-30 4+3 job layout with plant watering jobs; smaller 190 px tiles
 # V0.6.2 2026-07-25 Standardized MQTT payloads: "ON"/"OFF" → "On"/"Off"
 # V0.6.1 2026-07-20 Allowed GPIO4/GPIO5 to be shared by the EXT1 deep-sleep
@@ -44,18 +46,14 @@
 # - Display busy: GPIO13, inverted
 #:########################################################################################:#
 # OPERATION:
-# - The device sleeps for five minutes, then wakes and checks the currently displayed page.
+# - The device sleeps for five minutes, then wakes and checks the Jobs page.
 # - Either white button can wake the ESP32-S3 through EXT1 ANY_LOW.
-# - A left-button wake selects View Road Jobs; a right-button wake selects Appliances.
+# - Either white button shows and checks View Road Jobs and resets the activity timeout.
-# - The wake button is identified from the retained ESP32 EXT1 wake-status bitmask, so one
+# - The Jobs display hash survives deep sleep. The e-paper panel refreshes only when the
-#   press both wakes the device and selects the intended page.
+#   Jobs content or visible awake/sleep indicator changes.
-# - Timer wakeups retain the page that was displayed before sleep.
-# - Per-page display hashes survive deep sleep. The e-paper panel refreshes only when the
-#   selected page content, selected page, or visible awake/sleep indicator changes.
 # - Two open eyes indicate an interactive/kept-awake panel. Two closed eyes are written to
 #   the e-paper panel before entering deep sleep.
-# - After a button interaction, the device remains awake briefly so another page can be
+# - After a button interaction, the device remains awake briefly for further interaction.
-#   selected without waiting through another complete wake-and-connect cycle.
 # - Home Assistant entity data is imported through the encrypted ESPHome native API.
 # - MQTT is used only for retained deep-sleep control and retained awake/sleep status.
 #
@@ -83,12 +81,12 @@ substitutions:
   # Device Naming
   device_name: "esp-reterminal-e1001"
   friendly_name: "reTerminal E1001 Dashboard"
-  description_comment: "Seeed Studio reTerminal E1001 two-page Home Assistant jobs and appliance status dashboard with five-minute deep sleep, button wake and panel-state eyes. (Layout V2.0)"
+  description_comment: "Seeed Studio reTerminal E1001 Home Assistant Jobs dashboard with five-minute deep sleep, button wake and panel-state eyes. (Layout V2.0)"
   device_area: "Lounge"
 
   # Project Naming
   project_name: "SeeedStudio.reTerminal-E1001"
-  project_version: "v0.7.0"
+  project_version: "v0.8.0"
 
   # Passwords and Secrets
   api_key: !secret esp-api_key
@@ -104,7 +102,6 @@ substitutions:
   # Device Settings
   log_level: "INFO"
   display_check_interval: "30s"
-  finished_highlight_seconds: "3600"
   job_hours_display_limit: "48"
 
   # Deep Sleep Settings
@@ -187,28 +184,11 @@ esphome:
             // is explicitly kept awake through MQTT.
             id(panel_awake_indicator) = id(woke_by_button);
 
-            const int previous_page = id(current_page);
-
-            if (id(woke_by_button)) {
-              // GPIO5 is the left white button: Jobs.
-              if ((id(wakeup_pin_mask) & (1ULL << 5)) != 0) {
-                id(current_page) = 0;
-              }
-              // GPIO4 is the right white button: Appliances.
-              else if ((id(wakeup_pin_mask) & (1ULL << 4)) != 0) {
-                id(current_page) = 1;
-              }
-            }
-
-            id(page_changed_on_wake) = id(current_page) != previous_page;
-
              ESP_LOGI(
                "wakeup",
-              "Wake cause=%d EXT1 mask=0x%llX page=%d changed=%s",
+               "Wake cause=%d EXT1 mask=0x%llX",
                id(wakeup_cause),
-              static_cast<unsigned long long>(id(wakeup_pin_mask)),
+               static_cast<unsigned long long>(id(wakeup_pin_mask))
-              id(current_page) + 1,
-              id(page_changed_on_wake) ? "yes" : "no"
              );
 
     #:####################################################################################:#
@@ -257,7 +237,6 @@ esphome:
               lambda: |-
                 if (!id(homeassistant_time).now().is_valid()) return false;
 
-                if (id(current_page) == 0) {
                  return
                    id(job_dog_feeding_morning_state).has_state() &&
                    id(job_dog_feeding_evening_state).has_state() &&
@@ -273,44 +252,15 @@ esphome:
                    id(job_rubbish_removed_due_ts).has_state() &&
                    id(job_water_tv_pot_plant_due_ts).has_state() &&
                    id(job_water_table_pot_plant_due_ts).has_state();
-                }
-
-                return
-                  id(appliance_washing_state).has_state() &&
-                  id(appliance_dryer_state).has_state() &&
-                  id(appliance_main_dishwasher_state).has_state() &&
-                  id(appliance_downstairs_dishwasher_state).has_state() &&
-                  id(appliance_evcharger_32a_state).has_state() &&
-                  id(appliance_evcharger_16a_state).has_state() &&
-                  id(appliance_ryobi_left_state).has_state() &&
-                  id(appliance_ryobi_right_state).has_state() &&
-                  id(appliance_pool_pump_state).has_state() &&
-                  id(appliance_3d_printer_state).has_state();
              timeout: "${ha_data_timeout}"
 
-        - if:
-            condition:
-              lambda: |-
-                return id(current_page) == 0;
-            then:
         - display.page.show: page_jobs
-            else:
-              - display.page.show: page_appliances
 
         - if:
             condition:
               lambda: |-
                 return id(homeassistant_time).now().is_valid();
             then:
-              - if:
-                  condition:
-                    lambda: |-
-                      return id(page_changed_on_wake);
-                  then:
-                    - script.execute:
-                        id: refresh_display_if_changed
-                        force: true
-                  else:
               - script.execute:
                   id: refresh_display_if_changed
                   force: false
@@ -383,7 +333,7 @@ spi:
 
 #:########################################################################################:#
 # HOME ASSISTANT TIME:
-# Used for the date header, job countdowns and appliance completion age.
+# Used for the date header and job countdowns.
 # https://esphome.io/components/time/homeassistant.html
 #:########################################################################################:#
 time:
@@ -397,28 +347,17 @@ time:
 
 #:########################################################################################:#
 # GLOBALS:
-# Page, persistent display hashes, wake information and sleep-control state
+# Persistent display hash, wake information and sleep-control state
 # https://esphome.io/components/globals.html
 #:########################################################################################:#
 globals:
-  # The currently visible page survives deep sleep so timer wakes retain it.
+  # The persistent Jobs hash is updated only when the visible content really changes,
-  - id: current_page
+  # avoiding a flash write on every five-minute wake.
-    type: int
-    restore_value: yes
-    initial_value: "0"
-
-  # A separate persistent hash is kept for each page. These are updated only when the
-  # visible content really changes, avoiding a flash write on every five-minute wake.
   - id: last_jobs_signature_hash
     type: uint32_t
     restore_value: yes
     initial_value: "0"
 
-  - id: last_appliances_signature_hash
-    type: uint32_t
-    restore_value: yes
-    initial_value: "0"
-
   - id: display_update_required
     type: bool
     restore_value: no
@@ -439,13 +378,8 @@ globals:
     restore_value: no
     initial_value: "false"
 
-  - id: page_changed_on_wake
-    type: bool
-    restore_value: no
-    initial_value: "false"
-
   # Desired icon currently rendered in the display header. This is included in the
-  # per-page signature, so changing eye state refreshes only when required.
+  # Jobs signature, so changing eye state refreshes only when required.
   - id: panel_awake_indicator
     type: bool
     restore_value: no
@@ -505,20 +439,6 @@ font:
     id: font_job_status
     size: 23
 
-  - file:
-      type: gfonts
-      family: Inter
-      weight: 700
-    id: font_appliance_title
-    size: 16
-
-  - file:
-      type: gfonts
-      family: Inter
-      weight: 700
-    id: font_appliance_status
-    size: 17
-
 #:########################################################################################:#
 # JOB AND STATUS ICONS:
 # Material Design Icons are downloaded and embedded at compile time.
@@ -605,7 +525,7 @@ image:
 
 #:########################################################################################:#
 # DISPLAY:
-# Two pages with rounded status tiles.
+# Single Jobs page with rounded status tiles.
 # The display itself never runs on a blind polling interval. All refreshes pass through
 # refresh_display_if_changed before the physical e-paper update occurs.
 # https://esphome.io/components/display/waveshare_epaper.html