From a76dbb6b1636f3263761bd6e843edc592cf9d5f0 Mon Sep 17 00:00:00 2001
From: ESPHome Device Builder <device-builder@esphome.io>
Date: Mon, 20 Jul 2026 20:47:14 +1200
Subject: [PATCH] Edit esp-downstkitchlights.yaml

---
 esphome/esp-downstkitchlights.yaml | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/esphome/esp-downstkitchlights.yaml b/esphome/esp-downstkitchlights.yaml
index fa2c547..2b59b42 100644
--- a/esphome/esp-downstkitchlights.yaml
+++ b/esphome/esp-downstkitchlights.yaml
@@ -6,6 +6,7 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstkitchlights.yaml
 #:########################################################################################:#
 # VERSIONS:
+# v2.2 2026-07-20 Restored direct MQTT control of pantry LEDs using the flattened topic
 # v2.1 2026-02-25 Updated yaml to zorruno layout V1.1
 # v2.0 2025-06-05 YAML tidyups
 # v1.0 2025-03-28 Initial Version
@@ -21,6 +22,13 @@
 # - Relay 1: Dining Light
 # - Relay 2: Kitchen Light
 # - Relay 3: Extract Fan (virtual only, no power connected to 3rd relay)
+# - Relay 2 publishes ON/OFF commands directly to the downstairs kitchen pantry LEDs.
+#:########################################################################################:#
+# MQTT COMMANDS:
+# - Remote command topic:
+#   ${mqtt_remote_device_command_topic}
+#     Payload "${mqtt_remote_device_command_on}"  -> pantry LEDs ON
+#     Payload "${mqtt_remote_device_command_off}" -> pantry LEDs OFF
 #:########################################################################################:#
 # OFFLINE NOTES:
 # a) Home Assistant OFFLINE, but Network and MQTT ONLINE
@@ -36,7 +44,6 @@
 #    - Accurate time is NOT needed (SNTP not needed)
 #:########################################################################################:#
 
-
 #:########################################################################################:#
 # SUBSTITUTIONS: Specific device variable substitutions
 # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
@@ -50,7 +57,7 @@ substitutions:
 
   # Project Naming
   project_name: "Zemismart Technologies.KS-811 Triple"
-  project_version: "v2.1"
+  project_version: "v2.2"
 
   # Passwords & Secrets
   api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
@@ -61,6 +68,13 @@ substitutions:
   # Don't forget to switch it back when changed.
   current_ip_address: ${static_ip_address}
 
+  # MQTT REMOTE Controls
+  mqtt_command_main_topic: !secret mqtt_command_main_topic
+  mqtt_remote_device_name: "downstairskitchen-pantryleds"
+  mqtt_remote_device_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}"
+  mqtt_remote_device_command_on: "ON"
+  mqtt_remote_device_command_off: "OFF"
+
   # Device Settings
   log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
   update_interval: "60s" # update time for general sensors etc
@@ -195,8 +209,16 @@ switch:
     name: "Relay 2: ${switch_2_name}"
     pin: GPIO12
     id: Relay_2
+    on_turn_on:
+      - mqtt.publish:
+          topic: "${mqtt_remote_device_command_topic}"
+          payload: "${mqtt_remote_device_command_on}"
+    on_turn_off:
+      - mqtt.publish:
+          topic: "${mqtt_remote_device_command_topic}"
+          payload: "${mqtt_remote_device_command_off}"
 
   - platform: gpio
     name: "Relay 3: ${switch_3_name}"
     pin: GPIO14
-    id: Relay_3
\ No newline at end of file
+    id: Relay_3