yaml layout updates to v1.x
This commit is contained in:
root
@@ -1,53 +1,77 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DOWNSTAIRS BATHROOM MAIN LIGHTSWITCH
|
||||
#:########################################################################################:#
|
||||
# TITLE: DOWNSTAIRS BATHROOM MAIN LIGHTSWITCH
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstbathswitch.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V2.0 2025-06-05 YAML Tidyups
|
||||
# V1.0 2025-02-14 Initial Version
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# Zemismart KS-811 Triple push button (KS-811-3)
|
||||
# pinout/schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Triple wall switch for Downstairs Bathroom
|
||||
# - Button 1 toggles Relay 1 (Main Lights)
|
||||
# - Button 2 toggles Relay 2 (Cabinet Light)
|
||||
# - Button 3 controls Relay 3 (Extract Fan) using multi-click timing:
|
||||
# - Single click: toggle, or run for 5 minutes then off
|
||||
# - Double click: run for 30 minutes then off
|
||||
# - Triple click: run for 4 hours then off
|
||||
# - Hold (2s+): toggle permanently
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
|
||||
# - Switch continues operating locally (buttons drive relays)
|
||||
# - If MQTT is used elsewhere in your system, this device itself does not require it for basic operation
|
||||
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
|
||||
# - Switch continues operating locally (buttons drive relays)
|
||||
# - HA can still control/read the relays via API
|
||||
# c) Entire WiFi/Network OFFLINE
|
||||
# - Switch continues operating locally (buttons drive relays)
|
||||
# - Timeclocks will drift without network (SNTP). Time of day can be reset by powering off then on again at 12pm (midday)
|
||||
#:########################################################################################:#
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS: Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-downstbathswitch"
|
||||
friendly_name: "Downstairs Bath Lightswitch (3)"
|
||||
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3)"
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3) (Layout V1.1)"
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-downstbathswitch_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-downstbathswitch_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords (unfortunately you cannot use substitutions inside secrets names)
|
||||
api_key: !secret esp-downstbathswitch_api_key
|
||||
ota_pass: !secret esp-downstbathswitch_ota_pass
|
||||
static_ip_address: !secret esp-downstbathswitch_ip
|
||||
|
||||
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
||||
# Don't forget to switch it back when changed.
|
||||
current_ip_address: ${static_ip_address}
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
update_interval: "60s" # update time for general sensors etc
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Main Lights"
|
||||
switch_2_name: "Cabinet Light"
|
||||
switch_3_name: "Extract Fan" # This is virtual only, no power connected to 3rd relay
|
||||
switch_3_name: "Extract Fan" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
# Comment some of these out where not needed, eg MQTT, Web portal, SNTP, General Sensors
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
@@ -56,6 +80,7 @@ packages:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
local_current_ip_address: "${current_ip_address}"
|
||||
|
||||
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
||||
common_api: !include
|
||||
@@ -69,65 +94,70 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
|
||||
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
common_sntp: !include common/sntp_common.yaml
|
||||
common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
#:########################################################################################:#
|
||||
# ESPHOME:
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" #Appears on the esphome page in HA
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# ESP PLATFORM AND FRAMEWORK:
|
||||
# https://esphome.io/components/esp8266/
|
||||
# https://esphome.io/components/esp32/
|
||||
#:########################################################################################:#
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
#:########################################################################################:#
|
||||
# LOGGING: ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
level: "${log_level}"
|
||||
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
#:########################################################################################:#
|
||||
# STATUS LED:
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: True
|
||||
inverted: true
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS:
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
use_interrupt: false # This pin doesn't support interrupts so use polling. Only supresses a warning.
|
||||
inverted: true
|
||||
use_interrupt: false # GPIO16 does not support interrupts so use polling (suppresses warning).
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
@@ -136,7 +166,7 @@ binary_sensor:
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
inverted: true
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
@@ -145,10 +175,10 @@ binary_sensor:
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
inverted: true
|
||||
name: "Button 3: ${switch_3_name}"
|
||||
on_multi_click:
|
||||
# Single click: 1 press → relay on for 5 minutes
|
||||
# Single click: 1 press -> relay on for 5 minutes
|
||||
- timing:
|
||||
- ON for at most 0.5s
|
||||
- OFF for at least 0.5s
|
||||
@@ -163,7 +193,7 @@ binary_sensor:
|
||||
- delay: 5min
|
||||
- switch.turn_off: Relay_3
|
||||
|
||||
# Double click: 2 presses → relay on for 30 minutes
|
||||
# Double click: 2 presses -> relay on for 30 minutes
|
||||
- timing:
|
||||
- ON for at most 0.5s
|
||||
- OFF for at most 0.5s
|
||||
@@ -180,7 +210,7 @@ binary_sensor:
|
||||
- delay: 30min
|
||||
- switch.turn_off: Relay_3
|
||||
|
||||
# Triple click: 3 presses → relay on for 4 hours
|
||||
# Triple click: 3 presses -> relay on for 4 hours
|
||||
- timing:
|
||||
- ON for at most 0.5s
|
||||
- OFF for at most 0.5s
|
||||
@@ -199,7 +229,7 @@ binary_sensor:
|
||||
- delay: 4h
|
||||
- switch.turn_off: Relay_3
|
||||
|
||||
# Hold: pressed for 1 second or more → relay toggles permanently
|
||||
# Hold: pressed for 2 seconds or more -> relay toggles permanently
|
||||
- timing:
|
||||
- ON for at least 2s
|
||||
then:
|
||||
@@ -211,22 +241,22 @@ binary_sensor:
|
||||
else:
|
||||
- switch.turn_on: Relay_3
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
#:########################################################################################:#
|
||||
# SWITCH COMPONENT:
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 3: ${switch_3_name}"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
id: Relay_3
|
||||
Reference in New Issue
Block a user