yaml layout updates to v1.x
This commit is contained in:
root
+108
-79
@@ -1,51 +1,78 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# OFFICE MAIN LIGHTSWITCH
|
||||
# V2.0 2025-06-05 YAML Tidyups
|
||||
# V1.0 2025-05-31 Initial Version
|
||||
#############################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#:########################################################################################:#
|
||||
# TITLE: OFFICE MAIN LIGHTSWITCH
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officelights.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# v2.1 2026-02-25 Updated yaml to zorruno layout V1.1
|
||||
# v2.0 2025-06-05 YAML Tidyups
|
||||
# v1.0 2025-05-31 Initial Version
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# - Zemismart KS-811 Triple push button (ESP8266)
|
||||
# - Pinout/Schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Office 3-gang KS-811 (Triple) wall switch.
|
||||
# - Button 1 toggles Relay 1 (Nighttime Lights) - only relay actually wired to a load.
|
||||
# - Button 2 toggles Relay 2 (Daytime Lights) - virtual only (no physical load connected).
|
||||
# - Button 3 toggles Relay 3 (Spare) - virtual only (no physical load connected).
|
||||
# - GPIO16 does not support interrupts; polling is used for Button 1.
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant OFFLINE, WiFi OK
|
||||
# - Physical buttons still control relays locally.
|
||||
# - MQTT is optional; device operates as a normal switch without HA.
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
# b) MQTT OFFLINE (or broker unreachable)
|
||||
# - Physical buttons still control relays locally.
|
||||
# - HA/API control (if available) still works, but no MQTT command/status.
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
# c) Entire WiFi/Network OFFLINE
|
||||
# - Physical buttons still control relays locally.
|
||||
# - Accurate time is NOT needed (SNTP not needed).
|
||||
#:########################################################################################:#
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS: Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-officelights"
|
||||
friendly_name: "Office Main Lightswitch (3)"
|
||||
description_comment: "Office Main Lightswitch using a Zemismart KS-811 Triple Push Button. Bunker Light A (1), Spare A (2), Spare B (3)"
|
||||
device_area: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
description_comment: "Office Main Lightswitch using a Zemismart KS-811 Triple Push Button. Bunker Light A (1), Spare A (2), Spare B (3) (Layout V1.1)"
|
||||
device_area: "Office"
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple"
|
||||
project_version: "v2.1"
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-officelights_ip
|
||||
|
||||
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
||||
# Don't forget to switch it back when changed.
|
||||
current_ip_address: ${static_ip_address}
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
log_level: "INFO"
|
||||
update_interval: "60s"
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Nighttime Lights" # Only one light (Bunker Light) actually connected to this relay
|
||||
switch_2_name: "Daytime Lights" # This is virtual only, no power connected to 2nd relay
|
||||
switch_3_name: "Spare" # This is virtual only, no power connected to 3rd relay
|
||||
switch_1_name: "Nighttime Lights" # Only one light (Bunker Light) actually connected to this relay
|
||||
switch_2_name: "Daytime Lights" # Virtual only, no power connected to 2nd relay
|
||||
switch_3_name: "Spare" # Virtual only, no power connected to 3rd relay
|
||||
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
@@ -54,6 +81,7 @@ packages:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
local_current_ip_address: "${current_ip_address}"
|
||||
|
||||
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
||||
common_api: !include
|
||||
@@ -67,111 +95,112 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
#:########################################################################################:#
|
||||
# ESPHOME
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
comment: "${description_comment}"
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
# on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
#on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: relay_3
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
# ESP PLATFORM AND FRAMEWORK
|
||||
# https://esphome.io/components/esp8266.html
|
||||
#:########################################################################################:#
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
early_pin_init: false
|
||||
board_flash_mode: dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
#:########################################################################################:#
|
||||
# LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
level: "${log_level}"
|
||||
#baud_rate: 0
|
||||
id: logger_id
|
||||
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
inverted: true
|
||||
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
# Button 1 (GPIO16) - polling (GPIO16 has no interrupts)
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
use_interrupt: False # GPIO16 pin doesn't support interrupts so use polling. Only supresses a warning.
|
||||
inverted: true
|
||||
use_interrupt: false
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
- switch.toggle: relay_1
|
||||
|
||||
# Button 2 (GPIO05)
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
inverted: true
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
- switch.toggle: relay_2
|
||||
|
||||
# Button 3 (GPIO4)
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
inverted: true
|
||||
name: "Button 3: ${switch_3_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_3
|
||||
- switch.toggle: relay_3
|
||||
|
||||
#############################################
|
||||
# SWITCH COMPONENT
|
||||
#:########################################################################################:#
|
||||
# SWITCH
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
# Relay 1 (GPIO13)
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
id: relay_1
|
||||
|
||||
# Relay 2 (GPIO12)
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
id: relay_2
|
||||
|
||||
# Relay 3 (GPIO14)
|
||||
- platform: gpio
|
||||
name: "Relay 3: ${switch_3_name}"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
id: relay_3
|
||||
Reference in New Issue
Block a user