multiple esphome device updates and new devices
This commit is contained in:
root
@@ -14,7 +14,7 @@ substitutions:
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: ${mqtt_server}
|
||||
topic_prefix: ${mqtt_topic}/${device_name}
|
||||
topic_prefix: ${mqtt_topic}/${local_device_name}
|
||||
username: ${mqtt_username}
|
||||
password: ${mqtt_password}
|
||||
discovery: False # enable entity discovery (true is default)
|
||||
|
||||
@@ -23,7 +23,12 @@ substitutions:
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
static_ip_dns1: !secret ha_wifi_gateway
|
||||
static_ip_dns1: !secret ha_wifi_dns1
|
||||
static_ip_dns2: !secret ha_wifi_dns2
|
||||
|
||||
# Network reconnect every x hours to ensure best access point
|
||||
base_interval_hours: "6" # Base interval in hours
|
||||
random_offset_max_minutes: "59" # Max random offset in minutes
|
||||
|
||||
#############################################
|
||||
# Common Wifi Settings
|
||||
@@ -45,8 +50,9 @@ wifi:
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
dns1: ${static_ip_dns1}
|
||||
dns2: ${static_ip_dns2}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${device_name} AP
|
||||
ssid: ${local_device_name} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 10min # Time until it brings up fallback AP. default is 1min
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
@@ -78,4 +84,37 @@ safe_mode:
|
||||
# https://esphome.io/components/network.html
|
||||
#############################################
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
|
||||
#############################################
|
||||
# Interval
|
||||
# Restart Networking every x hours + rand mins
|
||||
# This ensure that the device is connected to the best AP
|
||||
#############################################
|
||||
script:
|
||||
- id: random_reconnect
|
||||
mode: restart
|
||||
then:
|
||||
- lambda: |-
|
||||
// Compute total delay: base hours + random offset minutes
|
||||
uint32_t extra;
|
||||
#if defined(ESP32)
|
||||
// ESP32 (both Arduino & IDF builds) uses esp_random()
|
||||
extra = esp_random() % (${random_offset_max_minutes} + 1);
|
||||
#elif defined(ESP8266)
|
||||
// ESP8266 Arduino core
|
||||
extra = os_random() % (${random_offset_max_minutes} + 1);
|
||||
#else
|
||||
// Fallback to esp_random() on other platforms
|
||||
extra = esp_random() % (${random_offset_max_minutes} + 1);
|
||||
#endif
|
||||
uint32_t total_s = ${base_interval_hours} * 3600 + extra * 60;
|
||||
ESP_LOGI("random_reconnect", "Next reconnect in %u seconds", total_s);
|
||||
// Delay inside lambda (blocks script execution but OK for reconnect timing)
|
||||
delay(total_s * 1000);
|
||||
- logger.log: "network_check: performing reconnect"
|
||||
- wifi.disable: {}
|
||||
- delay: 1s
|
||||
- wifi.enable: {}
|
||||
- script.execute: random_reconnect
|
||||
|
||||
|
||||
126
esphome/common/network_common_dual.yaml
Normal file
126
esphome/common/network_common_dual.yaml
Normal file
@@ -0,0 +1,126 @@
|
||||
substitutions:
|
||||
##############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
|
||||
# Automatically add the mac address to the name
|
||||
# eg so you can use a single firmware for all devices
|
||||
add_mac_suffix: "false"
|
||||
|
||||
# Enable or disable the use of IPv6 networking on the device
|
||||
ipv6_enable: "false"
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
static_ip_dns1: !secret ha_wifi_dns1
|
||||
static_ip_dns2: !secret ha_wifi_dns2
|
||||
|
||||
# Network reconnect every x hours to ensure best access point
|
||||
base_interval_hours: "6" # Base interval in hours
|
||||
random_offset_max_minutes: "59" # Max random offset in minutes
|
||||
|
||||
#############################################
|
||||
# Common Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
networks:
|
||||
- ssid: "vega_control_1"
|
||||
password: "3Kd#vQBP8RDc"
|
||||
priority: 1.0
|
||||
- ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#enable_rrm: true # (ESP32 only) enable 802.11k Radio Resource Management
|
||||
#enable_btm: true # (ESP32 only) enable 802.11v BSS Transition Management
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
priority: 0.5
|
||||
manual_ip: # optional static IP address
|
||||
static_ip: ${local_static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
dns1: ${static_ip_dns1}
|
||||
dns2: ${static_ip_dns2}
|
||||
|
||||
use_address: ${local_static_ip_address} # required when any network uses manual_ip
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${device_name} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 10min # Time until it brings up fallback AP. default is 1min
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
fast_connect: "${wifi_fast_connect}"
|
||||
# Define dns domain / suffix to add to hostname
|
||||
domain: "${dns_domain}"
|
||||
|
||||
#captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${local_ota_pass}
|
||||
version: 2
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Network
|
||||
# global configuration for all types of networks
|
||||
# https://esphome.io/components/network.html
|
||||
#############################################
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
|
||||
#############################################
|
||||
# Interval
|
||||
# Restart Networking every x hours + rand mins
|
||||
#############################################
|
||||
script:
|
||||
- id: random_reconnect
|
||||
mode: restart
|
||||
then:
|
||||
- lambda: |-
|
||||
// Compute total delay: base hours + random offset minutes
|
||||
uint32_t extra;
|
||||
#if defined(ESP32)
|
||||
// ESP32 (both Arduino & IDF builds) uses esp_random()
|
||||
extra = esp_random() % (${random_offset_max_minutes} + 1);
|
||||
#elif defined(ESP8266)
|
||||
// ESP8266 Arduino core
|
||||
extra = os_random() % (${random_offset_max_minutes} + 1);
|
||||
#else
|
||||
// Fallback to esp_random() on other platforms
|
||||
extra = esp_random() % (${random_offset_max_minutes} + 1);
|
||||
#endif
|
||||
uint32_t total_s = ${base_interval_hours} * 3600 + extra * 60;
|
||||
ESP_LOGI("random_reconnect", "Next reconnect in %u seconds", total_s);
|
||||
// Delay inside lambda (blocks script execution but OK for reconnect timing)
|
||||
delay(total_s * 1000);
|
||||
- logger.log: "network_check: performing reconnect"
|
||||
- wifi.disable: {}
|
||||
- delay: 1s
|
||||
- wifi.enable: {}
|
||||
- script.execute: random_reconnect
|
||||
|
||||
81
esphome/common/network_common_fallback.yaml
Normal file
81
esphome/common/network_common_fallback.yaml
Normal file
@@ -0,0 +1,81 @@
|
||||
substitutions:
|
||||
##############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
wifi_ssid: !secret ha_wifi_ssid
|
||||
wifi_password: !secret ha_wifi_password
|
||||
fallback_ap_password: !secret fallback_ap_password
|
||||
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
|
||||
# Automatically add the mac address to the name
|
||||
# eg so you can use a single firmware for all devices
|
||||
add_mac_suffix: "false"
|
||||
|
||||
# Enable or disable the use of IPv6 networking on the device
|
||||
ipv6_enable: "false"
|
||||
|
||||
# Add these if we are giving it a static ip, or remove them in the Wifi section
|
||||
static_ip_subnet: !secret ha_wifi_subnet
|
||||
static_ip_gateway: !secret ha_wifi_gateway
|
||||
static_ip_dns1: !secret ha_wifi_gateway
|
||||
|
||||
#############################################
|
||||
# Common Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: ${wifi_ssid}
|
||||
password: ${wifi_password}
|
||||
#enable_rrm: true # (ESP32 only) enable 802.11k Radio Resource Management
|
||||
#enable_btm: true # (ESP32 only) enable 802.11v BSS Transition Management
|
||||
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
manual_ip: # optional static IP address
|
||||
static_ip: ${local_static_ip_address}
|
||||
gateway: ${static_ip_gateway}
|
||||
subnet: ${static_ip_subnet}
|
||||
dns1: ${static_ip_dns1}
|
||||
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
ssid: ${device_name} AP
|
||||
password: ${fallback_ap_password}
|
||||
ap_timeout: 10min # Time until it brings up fallback AP. default is 1min
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
fast_connect: "${wifi_fast_connect}"
|
||||
# Define dns domain / suffix to add to hostname
|
||||
domain: "${dns_domain}"
|
||||
|
||||
#captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: ${local_ota_pass}
|
||||
version: 2
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
safe_mode:
|
||||
|
||||
#############################################
|
||||
# Network
|
||||
# global configuration for all types of networks
|
||||
# https://esphome.io/components/network.html
|
||||
#############################################
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
@@ -1,7 +1,7 @@
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# GENERAL COMMON SENSORS
|
||||
# https://esphome.io/components/sensor/
|
||||
#############################################
|
||||
##########################################################################################
|
||||
sensor:
|
||||
- platform: uptime # Uptime for this device in seconds
|
||||
name: "Uptime (s):"
|
||||
@@ -22,16 +22,23 @@ sensor:
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
# Only works with esp8266
|
||||
#- platform: adc
|
||||
# pin: VCC
|
||||
# name: "VCC Voltage"
|
||||
# id: vcc_voltage_sensor
|
||||
# entity_category: diagnostic
|
||||
|
||||
binary_sensor:
|
||||
- platform: status
|
||||
name: "Network Status"
|
||||
icon: mdi:check-network-outline
|
||||
entity_category: diagnostic
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
text_sensor:
|
||||
######################################################
|
||||
# General ESPHome Info
|
||||
@@ -58,9 +65,9 @@ text_sensor:
|
||||
update_interval: ${local_update_interval}
|
||||
entity_category: "diagnostic"
|
||||
|
||||
######################################################
|
||||
###################################################################################################
|
||||
# Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
|
||||
######################################################
|
||||
###################################################################################################
|
||||
# - platform: template
|
||||
# name: "Uptime (Days)"
|
||||
# entity_category: diagnostic
|
||||
@@ -109,6 +116,10 @@ text_sensor:
|
||||
# }
|
||||
# icon: mdi:clock-start
|
||||
|
||||
##########################################################################################
|
||||
# BUTTONS
|
||||
# Diagnostic buttons, activated if needed in HA
|
||||
##########################################################################################
|
||||
button:
|
||||
- platform: safe_mode
|
||||
name: "Safe Mode Restart:"
|
||||
|
||||
183
esphome/esp-3dprinterpow.yaml
Normal file
183
esphome/esp-3dprinterpow.yaml
Normal file
@@ -0,0 +1,183 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# 3D PRINTER POWER AND SWITCH
|
||||
# V1.0 2025-06-29 Initial Version
|
||||
#############################################
|
||||
# Sonoff POW R1
|
||||
# https://devices.esphome.io/devices/Sonoff-POW-R1
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
device_name: "esp-3dprinterpow" # Reference name for the device in the system.
|
||||
project_name: "Sonoff Technologies.POW R1" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
entity_prefix: "Load" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
friendly_name: "3D Printer Power"
|
||||
description_comment: "3D Printer inline monitor and switch override using a Sonoff Pow R1."
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-3dprinterpow_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
#on_boot:
|
||||
#priority: 200
|
||||
#then:
|
||||
# - switch.turn_on: "virtual_button"
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
#status_led:
|
||||
# pin:
|
||||
# number: GPIO2
|
||||
# inverted: yes
|
||||
|
||||
#############################################
|
||||
# SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO00
|
||||
mode: INPUT_PULLUP
|
||||
inverted: True
|
||||
name: Button
|
||||
on_press:
|
||||
- switch.toggle: virtual_button
|
||||
- platform: template
|
||||
name: ${entity_prefix} Running
|
||||
filters:
|
||||
- delayed_off: 15s
|
||||
lambda: |-
|
||||
if (isnan(id(power).state)) {
|
||||
return {};
|
||||
} else if (id(power).state > 4) {
|
||||
// Running
|
||||
return true;
|
||||
} else {
|
||||
// Not running
|
||||
return false;
|
||||
}
|
||||
|
||||
sensor:
|
||||
- platform: hlw8012
|
||||
sel_pin: 5
|
||||
cf_pin: 14
|
||||
cf1_pin: 13
|
||||
update_interval: 2s
|
||||
current:
|
||||
name: ${entity_prefix} Current
|
||||
voltage:
|
||||
name: ${entity_prefix} Voltage
|
||||
power:
|
||||
name: ${entity_prefix} Power
|
||||
id: power
|
||||
#on_value_range:
|
||||
# - above: 4.0
|
||||
# then:
|
||||
# - light.turn_on: led
|
||||
# - below: 3.0
|
||||
# then:
|
||||
# - light.turn_off: led
|
||||
|
||||
switch:
|
||||
- platform: template
|
||||
name: "Relay"
|
||||
optimistic: true
|
||||
id: virtual_button
|
||||
turn_on_action:
|
||||
- switch.turn_on: relay
|
||||
- light.turn_on: led
|
||||
turn_off_action:
|
||||
- switch.turn_off: relay
|
||||
- light.turn_off: led
|
||||
- platform: gpio
|
||||
id: relay
|
||||
pin: GPIO12
|
||||
#restore_mode: ALWAYS_ON # Or RESTORE_DEFAULT_ON/RESTORE_DEFAULT_OFF
|
||||
|
||||
output:
|
||||
- platform: esp8266_pwm
|
||||
id: pow_blue_led
|
||||
pin:
|
||||
number: GPIO15
|
||||
inverted: True
|
||||
|
||||
light:
|
||||
- platform: monochromatic
|
||||
name: Status LED
|
||||
output: pow_blue_led
|
||||
id: led
|
||||
381
esphome/esp-bedrm2ceilingfan.yaml
Normal file
381
esphome/esp-bedrm2ceilingfan.yaml
Normal file
@@ -0,0 +1,381 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# CEILING FAN - BEDROOM 2
|
||||
# - 3 speed fan using Sonoff IFan02
|
||||
# - Also, single Light Output
|
||||
#
|
||||
# Controlled by a Sonoff IFan 02
|
||||
#
|
||||
# V1.0 - 2025-07-21 First Setup (and replacement of Tasmota)
|
||||
#
|
||||
# NOTES:
|
||||
# Command the fan with MQTT
|
||||
# ${mqtt_local_command_full_topic}/speed/set 1,2,3,0,+,-
|
||||
# ${mqtt_local_command_full_topic}/light/set ON,OFF
|
||||
# Status of the fan is in MQTT
|
||||
# ${mqtt_local_command_full_topic}/speed/state 1,2,3,0
|
||||
# ${mqtt_local_command_full_topic}/light/state ON,OFF
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedrm2ceilingfan"
|
||||
friendly_name: "Bedroom 2 Ceiling Fan"
|
||||
description_comment: "3 Speed Overhead Ceiling Fan Bedroom 2 :: Sonoff ifan02"
|
||||
device_area: "Bedroom 2" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.Sonoff ifan02" # Project Details
|
||||
project_version: "v1.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-bedrm2ceilingfan_ip # unfortunately you can't use substitutions inside secrets names
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
mqtt_device_name: "bedroom2-ceilingfan"
|
||||
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
|
||||
# Button Naming & Icons
|
||||
|
||||
# Switch/Relay Naming & Icons
|
||||
#relay_icon: "mdi:lightbulb-group"
|
||||
light_1_name: "Fan Light"
|
||||
switch_2_name: "Fan 2 Relay"
|
||||
switch_3_name: "Fan 3 Relay"
|
||||
switch_4_name: "Fan 4 Relay"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
on_boot: # This weird toggle thing makes sure the states get restored on reboot
|
||||
priority : -100
|
||||
then:
|
||||
- delay: 200ms
|
||||
- fan.toggle: ifan02_fan
|
||||
- fan.toggle: ifan02_fan
|
||||
- delay: 200ms
|
||||
- light.toggle: ifan02_light
|
||||
- delay: 1ms
|
||||
- light.toggle: ifan02_light
|
||||
- delay: 1s
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: !lambda 'return to_string(id(speed_value));'
|
||||
# platformio_options:
|
||||
# build_flags:
|
||||
# - "-Os" # optimize for size
|
||||
# - "-Wl,--gc-sections" # drop unused code/data
|
||||
# - "-fno-exceptions" # strip C++ exceptaions
|
||||
# - "-fno-rtti" # strip C++ RTTI
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
restore_from_flash: True # restore some values on reboot
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: True # Disabling will make the build file smaller (and it is still available via static IP)
|
||||
|
||||
##########################################################################################
|
||||
# GLOBAL VARIABLES
|
||||
##########################################################################################
|
||||
globals:
|
||||
- id: speed_value
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: '0'
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" # INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM, Serial control)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# MQTT COMMANDS
|
||||
# This adds device-specific MQTT command triggers to the common MQTT configuration.
|
||||
##########################################################################################
|
||||
mqtt:
|
||||
on_message:
|
||||
# Light control
|
||||
- topic: "${mqtt_local_command_topic}/light/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- light.turn_on: ifan02_light
|
||||
- topic: "${mqtt_local_command_topic}/light/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- light.turn_off: ifan02_light
|
||||
|
||||
# Fan speed control (0–3) + ramp up/down (+ / -)
|
||||
- topic: "${mqtt_local_command_topic}/speed/set"
|
||||
then:
|
||||
# 1) Compute new speed_value based on payload
|
||||
- lambda: |-
|
||||
std::string s = x;
|
||||
int val = id(speed_value);
|
||||
if (s == "+") {
|
||||
val++;
|
||||
} else if (s == "-") {
|
||||
val--;
|
||||
} else if (s.size() && isdigit(s[0])) {
|
||||
val = atoi(s.c_str());
|
||||
} else {
|
||||
ESP_LOGE("ifan02", "Invalid speed payload: '%s'", x.c_str());
|
||||
return;
|
||||
}
|
||||
// Clamp between 0 and 3
|
||||
if (val < 0) val = 0;
|
||||
if (val > 3) val = 3;
|
||||
id(speed_value) = val;
|
||||
|
||||
# 2) Drive the fan based on the new value
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(speed_value) == 0;'
|
||||
then:
|
||||
- fan.turn_off: ifan02_fan
|
||||
else:
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: !lambda 'return id(speed_value);'
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Sonoff ifan02 has relays, but they don't need to be shown in HA because
|
||||
# the speed of the fan is the important part (and combinations of the relays give that)
|
||||
##########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "${switch_3_name}"
|
||||
pin: GPIO4
|
||||
id: fan3sw
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
internal: true
|
||||
- platform: gpio
|
||||
name: "${switch_2_name}"
|
||||
pin: GPIO5
|
||||
id: fan2sw
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
internal: true
|
||||
- platform: gpio
|
||||
name: "${switch_4_name}"
|
||||
pin: GPIO15
|
||||
id: fan4sw
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
internal: true
|
||||
|
||||
##########################################################################################
|
||||
# SELECT COMPONENT
|
||||
# https://esphome.io/components/select/index.html
|
||||
##########################################################################################
|
||||
select:
|
||||
- platform: template
|
||||
name: "Bedroom 2 Fan Speed"
|
||||
id: bedroom2_fan_speed_select
|
||||
options:
|
||||
- "Off"
|
||||
- "Low"
|
||||
- "Medium"
|
||||
- "High"
|
||||
update_interval: 1s
|
||||
lambda: |-
|
||||
switch (id(speed_value)) {
|
||||
case 1: return esphome::optional<std::string>("Low");
|
||||
case 2: return esphome::optional<std::string>("Medium");
|
||||
case 3: return esphome::optional<std::string>("High");
|
||||
default: return esphome::optional<std::string>("Off");
|
||||
}
|
||||
set_action:
|
||||
# OFF
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "Off";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 0;
|
||||
- fan.turn_off: ifan02_fan
|
||||
# LOW (1)
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "Low";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 1;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: 1
|
||||
# MEDIUM (2)
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "Medium";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 2;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: 2
|
||||
# HIGH (3)
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return x == "High";'
|
||||
then:
|
||||
- lambda: |-
|
||||
id(speed_value) = 3;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: 3
|
||||
|
||||
################################################################################
|
||||
# TEMPLATE OUTPUTS: drive the real relays when the states change
|
||||
################################################################################
|
||||
output:
|
||||
- platform: gpio
|
||||
pin: GPIO12
|
||||
id: lightrelay
|
||||
- platform: template
|
||||
type: float
|
||||
id: fan_decode
|
||||
write_action:
|
||||
- lambda: |-
|
||||
if (state < 0.25) {
|
||||
id(fan2sw).turn_off();
|
||||
id(fan3sw).turn_off();
|
||||
id(fan4sw).turn_off();
|
||||
}
|
||||
else if (state < 0.5) {
|
||||
id(fan2sw).turn_on();
|
||||
id(fan3sw).turn_off();
|
||||
id(fan4sw).turn_off();
|
||||
}
|
||||
else if (state < 0.75) {
|
||||
id(fan2sw).turn_on();
|
||||
id(fan3sw).turn_on();
|
||||
id(fan4sw).turn_off();
|
||||
}
|
||||
else {
|
||||
id(fan2sw).turn_on();
|
||||
id(fan3sw).turn_off();
|
||||
id(fan4sw).turn_on();
|
||||
}
|
||||
|
||||
##########################################################################################
|
||||
# LIGHT COMPONENT
|
||||
# https://esphome.io/components/light/
|
||||
##########################################################################################
|
||||
light:
|
||||
- platform: binary
|
||||
name: "${light_1_name}"
|
||||
output: lightrelay
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
id: ifan02_light
|
||||
# publish status updates when the light turns on/off:
|
||||
on_turn_on:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/light/state"
|
||||
payload: "ON"
|
||||
on_turn_off:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/light/state"
|
||||
payload: "OFF"
|
||||
|
||||
##########################################################################################
|
||||
# FAN COMPONENT
|
||||
# https://esphome.io/components/fan/index.html
|
||||
##########################################################################################
|
||||
fan:
|
||||
- platform: speed
|
||||
output: fan_decode
|
||||
name: "Fan"
|
||||
id: ifan02_fan
|
||||
speed_count: 3
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
# whenever you explicitly set a speed (1–3):
|
||||
on_speed_set:
|
||||
- lambda: |-
|
||||
id(speed_value) = x;
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: !lambda 'return to_string(id(speed_value));'
|
||||
# whenever the fan goes fully off:
|
||||
on_turn_off:
|
||||
- lambda: |-
|
||||
id(speed_value) = 0;
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: "0"
|
||||
# whenever the fan goes off→on (e.g. via HA’s Fan switch):
|
||||
on_turn_on:
|
||||
- lambda: |-
|
||||
// bump 0→1 if we were off
|
||||
if (id(speed_value) == 0) id(speed_value) = 1;
|
||||
- fan.turn_on:
|
||||
id: ifan02_fan
|
||||
speed: !lambda 'return id(speed_value);'
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_local_status_topic}/speed/state"
|
||||
payload: !lambda 'return to_string(id(speed_value));'
|
||||
265
esphome/esp-bedrm2fanswitch.yaml
Normal file
265
esphome/esp-bedrm2fanswitch.yaml
Normal file
@@ -0,0 +1,265 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# BEDROOM 2 FAN SWITCH
|
||||
#
|
||||
# Controlled by a Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# V1.0 - 2025-07-23 First Setup (and replacement of Tasmota)
|
||||
#
|
||||
# NOTES
|
||||
# - Switch for Ceiling Fan
|
||||
# - 3 Switches, Up, Down and Off
|
||||
# - Remote commands to the fan ${mqtt_remote_command_full_topic}/speed/set 1,2,3,0,+,-
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedrm2fanswitch"
|
||||
friendly_name: "Bedroom 2 Fan Wall Switch (3)"
|
||||
description_comment: "Switch for Bedroom 2 Ceiling Fan using Zemismart KS-811 Triple Push Button. Speed Up (1), Speed Down (2), Fan Off (3)"
|
||||
device_area: "Bedroom 2" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811-3 (Triple)" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
entity_prefix: "Main Bathroom" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-bedrm2fanswitch_ip
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
#relay_icon: "mdi:heating-coil"
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
#mqtt_device_name: "bedroom2-ceilingfan-switch"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
mqtt_remote_device_name: "bedroom2-ceilingfan"
|
||||
mqtt_remote_device_command_topic: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/speed/set"
|
||||
mqtt_remote_device_command1: "+"
|
||||
mqtt_remote_device_command2: "-"
|
||||
mqtt_remote_device_command3: "0"
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_remote_device_name}/speed/state" # Topic we will use to view status locally without HA
|
||||
|
||||
# Button Naming & Icons
|
||||
|
||||
# Switch/Relay Naming & Icons
|
||||
#relay_icon: "mdi:heating-coil"
|
||||
switch_1_name: "Fan Speed Up" # This is virtual only, no power connected to 1st relay
|
||||
switch_2_name: "Fan Speed Down" # This is virtual only, no power connected to 2nd relay
|
||||
switch_3_name: "Fan Off" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #Appears on the esphome page in HA
|
||||
area: ${device_area}
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
build_flags:
|
||||
- "-Os" # optimize for size
|
||||
- "-Wl,--gc-sections" # drop unused code/data
|
||||
- "-fno-exceptions" # strip C++ exceptions
|
||||
- "-fno-rtti" # strip C++ RTTI
|
||||
# on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
# Status LED for KS-811 is GPIO02
|
||||
##########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO02
|
||||
inverted: yes
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
# Buttons for KS-811-3 are GPIO16, GPIO05, GPIO04
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command1}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command2}"
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: ${switch_3_name}"
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_device_command_topic}"
|
||||
payload: "${mqtt_remote_device_command3}"
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Relays for KS-811-3 are GPIO13, GPIO12, GPIO14
|
||||
##########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
- platform: gpio
|
||||
name: "Relay 3: ${switch_3_name}"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
mqtt:
|
||||
on_message:
|
||||
- topic: "${mqtt_local_status_topic}"
|
||||
then:
|
||||
- lambda: |-
|
||||
int val = atoi(x.c_str());
|
||||
ESP_LOGI("fan_switch", "Received requested speed: %d", val);
|
||||
|
||||
// Desired states
|
||||
bool r1 = false;
|
||||
bool r2 = false;
|
||||
bool r3 = false;
|
||||
|
||||
switch (val) {
|
||||
case 1:
|
||||
r3 = true;
|
||||
break;
|
||||
case 2:
|
||||
r2 = true;
|
||||
r3 = true;
|
||||
break;
|
||||
case 3:
|
||||
r1 = true;
|
||||
r2 = true;
|
||||
r3 = true;
|
||||
break;
|
||||
case 0:
|
||||
default:
|
||||
// all remain false
|
||||
break;
|
||||
}
|
||||
|
||||
// Only change relays if necessary
|
||||
if (id(Relay_1).state != r1) {
|
||||
if (r1) {
|
||||
id(Relay_1).turn_on();
|
||||
} else {
|
||||
id(Relay_1).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
if (id(Relay_2).state != r2) {
|
||||
if (r2) {
|
||||
id(Relay_2).turn_on();
|
||||
} else {
|
||||
id(Relay_2).turn_off();
|
||||
}
|
||||
}
|
||||
|
||||
if (id(Relay_3).state != r3) {
|
||||
if (r3) {
|
||||
id(Relay_3).turn_on();
|
||||
} else {
|
||||
id(Relay_3).turn_off();
|
||||
}
|
||||
}
|
||||
180
esphome/esp-bedrm2lights.yaml
Normal file
180
esphome/esp-bedrm2lights.yaml
Normal file
@@ -0,0 +1,180 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
# V3.5 2025-07-24 YAML tidyups
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Double push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedrm2lights"
|
||||
friendly_name: "Bedroom 2 Lightswitch (2)"
|
||||
description_comment: "Bedroom 2 Main Lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Desk Lights (2)"
|
||||
device_area: "Bedroom 2" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v3.5" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-bedrm2lights_ip
|
||||
#mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
#mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
#relay_icon: "mdi:lightbulb-group"
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
#mqtt_device_name: "bedroom2-lights"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Main Lights"
|
||||
switch_2_name: "Desk Lights"
|
||||
#switch_3_name: "Nil"
|
||||
|
||||
#########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
#on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_2
|
||||
|
||||
#########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
# KS-811-2 is a double only
|
||||
# - platform: gpio
|
||||
# pin:
|
||||
# number: GPIO4
|
||||
# mode: INPUT
|
||||
# inverted: True
|
||||
# name: "Button 3: ${switch_3_name}"
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_3
|
||||
|
||||
#########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
|
||||
# KS-811-2 is a double only
|
||||
# - platform: gpio
|
||||
# name: "Relay 3: ${switch_3_name}"
|
||||
# pin: GPIO14
|
||||
# id: Relay_3
|
||||
|
||||
|
||||
@@ -22,7 +22,7 @@ substitutions:
|
||||
device_name: "esp-downstbathswitch"
|
||||
friendly_name: "Downstairs Bath Lightswitch (3)"
|
||||
description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3)"
|
||||
device_area: "Downstairs Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
@@ -42,24 +42,27 @@ substitutions:
|
||||
switch_2_name: "Cabinet Light"
|
||||
switch_3_name: "Extract Fan" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
|
||||
@@ -54,7 +54,7 @@ substitutions:
|
||||
device_name: "esp-downstbathtowelrail"
|
||||
friendly_name: "Downstairs Bathroom Towelrail"
|
||||
description_comment: "Heated Towel Rail, Downstairs Bathroom :: Sonoff Basic"
|
||||
device_area: "Downstairs Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.Sonoff Basic V1" # Project Details
|
||||
@@ -78,24 +78,27 @@ substitutions:
|
||||
evening_on_default: "1260" # Default in minutes from midnight. Default 21:00 => 1260
|
||||
evening_off_default: "1320" # Default in minutes from midnight. Default 22:00 => 1320 => 1440 is midnight
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -122,6 +125,8 @@ esphome:
|
||||
on_boot:
|
||||
priority: 900 # High priority to run after globals are initialized
|
||||
then:
|
||||
# This evaluates if we switch on 4+ times in 20 seconds
|
||||
# If so, just change to on mode permanently.
|
||||
- lambda: |-
|
||||
// 1) Figure out the current time in "seconds from midnight"
|
||||
// using SNTP if available, otherwise current_mins * 60.
|
||||
@@ -159,6 +164,7 @@ esphome:
|
||||
id(boost_timer) = 0; // and reset boost_timer = 0 (for time sync if no sntp)
|
||||
ESP_LOGI("power_cycle", "Boot count=%d => BOOST mode", id(boot_count));
|
||||
}
|
||||
- script.execute: evaluate_relay_state # Check what the relay should be doing straight away
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
@@ -218,31 +224,31 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -254,7 +260,7 @@ globals:
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: false
|
||||
restore_value: true
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
@@ -446,7 +452,6 @@ text_sensor:
|
||||
lambda: |-
|
||||
int hour = id(morning_off) / 60;
|
||||
int minute = id(morning_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
@@ -461,7 +466,6 @@ text_sensor:
|
||||
lambda: |-
|
||||
int hour = id(evening_on) / 60;
|
||||
int minute = id(evening_on) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
@@ -476,7 +480,6 @@ text_sensor:
|
||||
lambda: |-
|
||||
int hour = id(evening_off) / 60;
|
||||
int minute = id(evening_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
@@ -584,6 +587,23 @@ button:
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
- platform: template
|
||||
name: "Default timer settings"
|
||||
id: default_timer_settings_button
|
||||
icon: "mdi:restore"
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// Restore all timing globals to their YAML defaults
|
||||
id(morning_on) = ${morning_on_default};
|
||||
id(morning_off) = ${morning_off_default};
|
||||
id(evening_on) = ${evening_on_default};
|
||||
id(evening_off) = ${evening_off_default};
|
||||
id(boost_duration)= ${boost_duration_default};
|
||||
// Reset mode to TIMER and clear any running boost
|
||||
id(operation_mode)= 2;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Default timer settings applied");
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
|
||||
186
esphome/esp-downstbedrm1lights.yaml
Normal file
186
esphome/esp-downstbedrm1lights.yaml
Normal file
@@ -0,0 +1,186 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DOWNSTAIRS BEDROOM 1 LIGHTS
|
||||
# V3.5 2025-07-24 YAML tidyups
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-downstbedrm1lights"
|
||||
friendly_name: "Downstairs Bedroom 1 Lightswitch (3)"
|
||||
description_comment: "Downstairs Bedroom 1 Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Wardrobe Lights (2), Spare (3)"
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple" # Project Details
|
||||
project_version: "v3.5" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstbedrm1lights_ip
|
||||
#mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
#mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
#mqtt_device_name: "downst-bedroom2-lights"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
|
||||
# Switch/Relay/Button Naming & Icons
|
||||
#relay_icon: "mdi:lightbulb-group"
|
||||
switch_1_name: "Main Lights"
|
||||
switch_2_name: "Wardrobe Lights"
|
||||
switch_3_name: "Spare"
|
||||
|
||||
#########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
#on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_2
|
||||
|
||||
#########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#########################################################################################
|
||||
binary_sensor:
|
||||
# GPIO16 for KS-811 first button
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
# GPIO05 for second button (only for KS-811-2 Double or -3 Triple)
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
# GPIO04 for third button (only for KS-811-3 Triple)
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO4
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 3: ${switch_3_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_3
|
||||
|
||||
#########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#########################################################################################
|
||||
switch:
|
||||
# GPIO13 for KS-811 first relay
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
|
||||
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
|
||||
# GPIO14 for third relay (only for KS-811-3 Triple)
|
||||
- platform: gpio
|
||||
name: "Relay 3: ${switch_3_name}"
|
||||
pin: GPIO14
|
||||
id: Relay_3
|
||||
|
||||
|
||||
187
esphome/esp-downstbedrm2lights.yaml
Normal file
187
esphome/esp-downstbedrm2lights.yaml
Normal file
@@ -0,0 +1,187 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DOwNSTAIRS BEDROOM 2 LIGHTSWITCH
|
||||
# V3.5 2025-07-24 YAML tidyups
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Single push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-downstbedrm2lights"
|
||||
friendly_name: "Downstairs Bedroom 2 Lightswitch (1)"
|
||||
description_comment: "Downstairs Bedroom 2 Main Lightswitch using a Zemismart KS-811 Single Push Button. Main Lights (1)"
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Single" # Project Details
|
||||
project_version: "v3.5" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstbedrm2lights_ip
|
||||
#mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
#mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT LOCAL Controls
|
||||
#mqtt_device_name: "downst-bedroom2-lights"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# MQTT REMOTE Controls
|
||||
|
||||
# Switch/Relay/Button Naming & Icons
|
||||
#relay_icon: "mdi:lightbulb-group"
|
||||
switch_1_name: "Main Lights"
|
||||
#switch_2_name: "Nil"
|
||||
#switch_3_name: "Nil"
|
||||
|
||||
#########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
#on_boot:
|
||||
# priority: 200
|
||||
# then:
|
||||
# - switch.turn_on: Relay_2
|
||||
|
||||
#########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#########################################################################################
|
||||
binary_sensor:
|
||||
# GPIO16 for KS-811 first button UNLESS
|
||||
# it is a single button KS-811 in which case it is GPIO00
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO00
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
# GPIO05 for second button (only for KS-811-2 Double or -3 Triple)
|
||||
# - platform: gpio
|
||||
# pin:
|
||||
# number: GPIO05
|
||||
# mode: INPUT
|
||||
# inverted: True
|
||||
# name: "Button 2: ${switch_2_name}"
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_2
|
||||
|
||||
# GPIO04 for third button (only for KS-811-3 Triple)
|
||||
# - platform: gpio
|
||||
# pin:
|
||||
# number: GPIO4
|
||||
# mode: INPUT
|
||||
# inverted: True
|
||||
# name: "Button 3: ${switch_3_name}"
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_3
|
||||
|
||||
#########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#########################################################################################
|
||||
switch:
|
||||
# GPIO13 for KS-811 first button
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
|
||||
# GPIO12 for second relay (only for KS-811-2 Double or -3 Triple)
|
||||
# - platform: gpio
|
||||
# name: "Relay 2: ${switch_2_name}"
|
||||
# pin: GPIO12
|
||||
# id: Relay_2
|
||||
|
||||
# GPIO14 for third relay (only for KS-811-3 Triple)
|
||||
# - platform: gpio
|
||||
# name: "Relay 3: ${switch_3_name}"
|
||||
# pin: GPIO14
|
||||
# id: Relay_3
|
||||
|
||||
|
||||
@@ -20,7 +20,7 @@ substitutions:
|
||||
device_name: "esp-downstdishwpower"
|
||||
friendly_name: "Downstairs Dishwasher Power"
|
||||
description_comment: "Downstairs Dishwasher Power :: Athom Smart Plug Power V1"
|
||||
device_area: "Downstairs Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V1" # Project Details
|
||||
@@ -40,19 +40,26 @@ substitutions:
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES
|
||||
# https://esphome.io/components/esphome.html
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -61,12 +68,6 @@ packages:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Web and MQTT Packages
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
|
||||
@@ -22,7 +22,7 @@ substitutions:
|
||||
device_name: "esp-downstkitchlights"
|
||||
friendly_name: "Downstairs Kitchen Lightswitch (3)"
|
||||
description_comment: "Downstairs Kitch Main Lightswitch using a Zemismart KS-811 Triple Push Button. Dining Light (1), Kitchen Light (2), Extract Fan (3)"
|
||||
device_area: "Downstairs Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
@@ -38,24 +38,27 @@ substitutions:
|
||||
switch_2_name: "Kitchen Light"
|
||||
switch_3_name: "Extract Fan" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
|
||||
@@ -10,7 +10,7 @@
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: "esp-entbtproxy"
|
||||
device_name: "esp-entbtproxy"
|
||||
friendly_name: "Outside Entrance Bluetooth Proxy"
|
||||
description_comment: "D1 Mini ESP32 outside entranceway with BT Proxy"
|
||||
api_key: !secret esp-entbtproxy_api_key #unfortunately you can't use substitutions in secrets names
|
||||
@@ -26,38 +26,41 @@ substitutions:
|
||||
#
|
||||
#
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0 #
|
||||
|
||||
@@ -10,7 +10,7 @@
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
substitutions:
|
||||
devicename: "esp-entmulti"
|
||||
device_name: "esp-entmulti"
|
||||
friendly_name: "Outside Entrance Multisensor"
|
||||
description_comment: "D1 Mini ESP32 outside entranceway with, mmWave presence, PIR and more"
|
||||
api_key: !secret esp-entmulti_api_key #unfortunately you can't use substitutions in secrets names
|
||||
@@ -44,38 +44,41 @@ substitutions:
|
||||
#web_server_username: !secret web_server_username
|
||||
#web_server_password: !secret web_server_password
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
common_webportal: !include
|
||||
file: common/webportal_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
# common_sntp: !include
|
||||
# file: common/sntp_common.yaml
|
||||
# common_general_sensors: !include
|
||||
# file: common/sensors_common.yaml
|
||||
# vars:
|
||||
# local_friendly_name: ${friendly_name}
|
||||
# local_update_interval: ${update_interval}
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
esphome:
|
||||
name: ${devicename}
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0
|
||||
@@ -113,80 +116,6 @@ logger:
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
# https://esphome.io/components/api.html
|
||||
#############################################
|
||||
#api:
|
||||
# encryption:
|
||||
# key: ${api_key}
|
||||
# on_client_connected:
|
||||
# - esp32_ble_tracker.start_scan:
|
||||
# continuous: true
|
||||
# on_client_disconnected:
|
||||
# - esp32_ble_tracker.stop_scan:
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# https://esphome.io/components/ota.html?highlight=ota
|
||||
#############################################
|
||||
#ota:
|
||||
# - platform: esphome
|
||||
# password: ${ota_pass}
|
||||
|
||||
#############################################
|
||||
# Safe Mode
|
||||
# Safe mode will detect boot loops
|
||||
# https://esphome.io/components/safe_mode
|
||||
#############################################
|
||||
#safe_mode:
|
||||
|
||||
#############################################
|
||||
# Wifi Settings
|
||||
# https://esphome.io/components/wifi.html
|
||||
#
|
||||
# Power Save mode (can reduce wifi reliability)
|
||||
# NONE (least power saving, Default for ESP8266)
|
||||
# LIGHT (Default for ESP32)
|
||||
# HIGH (most power saving)
|
||||
#############################################
|
||||
#wifi:
|
||||
# ssid: ${wifi_ssid}
|
||||
# password: ${wifi_password}
|
||||
#power_save_mode: LIGHT #https://esphome.io/components/wifi.html#wifi-power-save-mode
|
||||
#manual_ip: #optional static IP address
|
||||
#static_ip: ${static_ip_address}
|
||||
#gateway: ${static_ip_gateway}
|
||||
#subnet: ${static_ip_subnet}
|
||||
# ap: #Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
|
||||
# ssid: $devicename fallback AP
|
||||
# password: !secret fallback_ap_password
|
||||
# ap_timeout: 5min #Time until it brings up fallback AP. default is 1min
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
# Turning this off is probably a good idea to save resources.
|
||||
# https://esphome.io/components/web_server.html
|
||||
#############################################
|
||||
#web_server:
|
||||
# port: 80
|
||||
# auth:
|
||||
# username: ${web_server_username} #probably a good idea to secure it
|
||||
# password: ${web_server_password}
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
# https://esphome.io/components/mqtt.html?highlight=mqtt
|
||||
# MUST also have api enabled if you enable MQTT
|
||||
#############################################
|
||||
#mqtt:
|
||||
# broker: ${mqtt_server}
|
||||
# topic_prefix: ${mqtt_topic}/${devicename}
|
||||
# username: ${mqtt_username}
|
||||
# password: ${mqtt_password}
|
||||
# discovery: False # enable entity discovery (true is default)
|
||||
# discover_ip: False # enable device discovery (true is default)
|
||||
|
||||
#############################################
|
||||
# i2c bus
|
||||
# https://esphome.io/components/i2c.html
|
||||
|
||||
@@ -30,31 +30,34 @@ substitutions:
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -30,31 +30,34 @@ substitutions:
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
#############################################
|
||||
#############################################
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
# V3.5 2025-07-24 YAML tidyups
|
||||
# V3.0 2025-06-05 YAML tidyups
|
||||
# V2.0 2025-06-01 Was initially a 3 button switch, now 2
|
||||
# V1.0 2025-05-30 Initial Version
|
||||
#############################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Double push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-laundrylights"
|
||||
|
||||
friendly_name: "Laundry Main Lightswitch (2)"
|
||||
description_comment: "Laundry Main Lightswitch using a Zemismart KS-811 Double Push Button. Laundry Lights (1), Laundry Power Signal (2)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
@@ -30,37 +30,50 @@ substitutions:
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v3.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-laundrylights_ip
|
||||
#mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
#mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
#relay_icon: "mdi:lightbulb-group"
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT Controls
|
||||
#mqtt_device_name: "bedroom2-ceilingfan"
|
||||
#mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
#mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Laundry Lights"
|
||||
switch_2_name: "Laundry Power Enable" # This is virtual only, no power connected to 3rd relay
|
||||
#switch_3_name: "Spare"
|
||||
#switch_3_name: "Fan 3 Relay"
|
||||
#switch_4_name: "Fan 4 Relay"
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -69,10 +82,10 @@ packages:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
#########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
@@ -86,16 +99,16 @@ esphome:
|
||||
then:
|
||||
- switch.turn_on: Relay_2
|
||||
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
#########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
@@ -105,19 +118,19 @@ logger:
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
#########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
#########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
@@ -147,10 +160,10 @@ binary_sensor:
|
||||
# on_press:
|
||||
# - switch.toggle: Relay_3
|
||||
|
||||
#############################################
|
||||
#########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#############################################
|
||||
#########################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
|
||||
@@ -30,31 +30,34 @@ substitutions:
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -30,31 +30,34 @@ substitutions:
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
# common_sntp: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -23,7 +23,7 @@ substitutions:
|
||||
description_comment: "Main Bathroom Fan/Heat Switch using a Zemismart KS-811 Double Push Button. Extract Fan (1), IR heater (2)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811-2 (Double)" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
@@ -45,34 +45,34 @@ substitutions:
|
||||
mqtt_remote_device1_command_topic: "${mqtt_main_command_topic}/masterbath-towelrail/operation"
|
||||
mqtt_remote_device1_command1: "BOOST"
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
device_name: ${device_name}
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
device_name: ${device_name}
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -30,34 +30,34 @@ substitutions:
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
device_name: ${device_name}
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
device_name: ${device_name}
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -39,19 +39,26 @@ substitutions:
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES
|
||||
# https://esphome.io/components/esphome.html
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -60,12 +67,6 @@ packages:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Web and MQTT Packages
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
#common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
|
||||
@@ -78,24 +78,27 @@ substitutions:
|
||||
evening_on_default: "1260" # Default in minutes from midnight. Default 21:00 => 1260
|
||||
evening_off_default: "1439" # Default in minutes from midnight. Default 23:59 => 1439 => 1440 is midnight
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
common_webportal: !include
|
||||
file: common/webportal_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -122,6 +125,8 @@ esphome:
|
||||
on_boot:
|
||||
priority: 900 # High priority to run after globals are initialized
|
||||
then:
|
||||
# This evaluates if we switch on 4+ times in 20 seconds
|
||||
# If so, just change to on mode permanently.
|
||||
- lambda: |-
|
||||
// 1) Figure out the current time in "seconds from midnight"
|
||||
// using SNTP if available, otherwise current_mins * 60.
|
||||
@@ -159,6 +164,7 @@ esphome:
|
||||
id(boost_timer) = 0; // and reset boost_timer = 0 (for time sync if no sntp)
|
||||
ESP_LOGI("power_cycle", "Boot count=%d => BOOST mode", id(boot_count));
|
||||
}
|
||||
- script.execute: evaluate_relay_state # Check what the relay should be doing straight away
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
@@ -166,7 +172,7 @@ esphome:
|
||||
#############################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
restore_from_flash: True # restore some values on reboot
|
||||
restore_from_flash: true # restore some values on reboot
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
@@ -218,31 +224,31 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -254,14 +260,13 @@ globals:
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: false
|
||||
restore_value: true
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
# Not restored, so it resets each boot.
|
||||
####################################################
|
||||
- id: current_mins
|
||||
type: int
|
||||
@@ -602,6 +607,23 @@ button:
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
- platform: template
|
||||
name: "Default timer settings"
|
||||
id: default_timer_settings_button
|
||||
icon: "mdi:restore"
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// Restore all timing globals to their YAML defaults
|
||||
id(morning_on) = ${morning_on_default};
|
||||
id(morning_off) = ${morning_off_default};
|
||||
id(evening_on) = ${evening_on_default};
|
||||
id(evening_off) = ${evening_off_default};
|
||||
id(boost_duration)= ${boost_duration_default};
|
||||
// Reset mode to TIMER and clear any running boost
|
||||
id(operation_mode)= 2;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Default timer settings applied");
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
|
||||
@@ -47,34 +47,34 @@ substitutions:
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
room: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
|
||||
#web_server: !remove
|
||||
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
|
||||
@@ -37,31 +37,34 @@ substitutions:
|
||||
#
|
||||
#
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: ${static_ip_address}
|
||||
local_ota_pass: ${ota_pass}
|
||||
# common_api: !include
|
||||
# file: common/api_common.yaml
|
||||
# vars:
|
||||
# local_api_key: ${api_key}
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: ${friendly_name}
|
||||
local_update_interval: ${update_interval}
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
@@ -73,29 +76,35 @@ esphome:
|
||||
comment: ${description_comment} #appears on the esphome page in HA
|
||||
min_version: 2024.6.0
|
||||
area: "${device_area}"
|
||||
on_boot: #LD1125H Initial Setting, will remember previous values (if set)
|
||||
priority: -200
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th1st = "mth1=" + str_sprintf("%.0f",id(LD1125H_mth1).state) +"\r\n";
|
||||
return std::vector<uint8_t>(th1st.begin(), th1st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th2st = "mth2=" + str_sprintf("%.0f",id(LD1125H_mth2).state) +"\r\n";
|
||||
return std::vector<uint8_t>(th2st.begin(), th2st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th3st = "mth3=" + str_sprintf("%.0f",id(LD1125H_mth3).state) +"\r\n";
|
||||
return std::vector<uint8_t>(th3st.begin(), th3st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string rmaxst = "rmax=" + str_sprintf("%.1f",id(LD1125H_rmax).state) +"\r\n";
|
||||
return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
|
||||
platformio_options:
|
||||
build_flags:
|
||||
- "-Os" # optimize for size
|
||||
- "-Wl,--gc-sections" # drop unused code/data
|
||||
- "-fno-exceptions" # strip C++ exceptions
|
||||
#- "-fno-rtti" # strip C++ RTTI
|
||||
on_boot:
|
||||
- priority: -200
|
||||
then:
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th1st = "mth1=" + str_sprintf("%.0f", id(LD1125H_mth1).state) + "\r\n";
|
||||
return std::vector<uint8_t>(th1st.begin(), th1st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th2st = "mth2=" + str_sprintf("%.0f", id(LD1125H_mth2).state) + "\r\n";
|
||||
return std::vector<uint8_t>(th2st.begin(), th2st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string th3st = "mth3=" + str_sprintf("%.0f", id(LD1125H_mth3).state) + "\r\n";
|
||||
return std::vector<uint8_t>(th3st.begin(), th3st.end());
|
||||
- uart.write:
|
||||
id: LD1125H_UART_BUS
|
||||
data: !lambda |-
|
||||
std::string rmaxst = "rmax=" + str_sprintf("%.1f", id(LD1125H_rmax).state) + "\r\n";
|
||||
return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
|
||||
@@ -7,12 +7,15 @@
|
||||
# Controlled by a Sonoff Dual R1
|
||||
# A sonoff dual uses serial data to turn the relays on/off
|
||||
#
|
||||
# V2.4 - 2025-06-30 Tidied up MQTT direct relay control (esps can control each other via MQTT)
|
||||
# V2.3 - 2025-06-18 Added MQTT direct relay control
|
||||
#
|
||||
# NOTES:
|
||||
# Command the lights on with MQTT
|
||||
# ${mqtt_command_topic}/relay2/set ON or OFF
|
||||
# ${mqtt_command_topic}/relay2/set ON or OFF
|
||||
# ${mqtt_local_command_full_topic}/relay1/set ON or OFF
|
||||
# ${mqtt_local_command_full_topic}/relay2/set ON or OFF
|
||||
# ${mqtt_local_status_full_topic}/relay1/set ON or OFF
|
||||
# ${mqtt_local_status_full_topic}/relay2/set ON or OFF
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
@@ -32,10 +35,12 @@ substitutions:
|
||||
project_name: "Sonoff Technologies.Sonoff Dual R1" # Project Details
|
||||
project_version: "v2.3" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-officeduallights_ip
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-officeduallights_ip # unfortunately you can't use substitutions inside secrets names
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:lightbulb-group"
|
||||
@@ -44,31 +49,38 @@ substitutions:
|
||||
|
||||
# MQTT Controls
|
||||
mqtt_device_name: "office-dual-lights"
|
||||
mqtt_main_command_topic: !secret mqtt_main_command_topic
|
||||
mqtt_topic: "${mqtt_main_command_topic}/${mqtt_device_name}" # Topic we will use to command stuff from external withougt HA
|
||||
#mqtt_status_topic: "${mqtt_main_status_topic}/esphome/${device_name}" # Topic we will use to read stuff from external withougt HA
|
||||
#mqtt_main_status_topic: !secret mqtt_main_status_topic
|
||||
#mqtt_remote_device1_command_topic: "${mqtt_main_command_topic}/masterbath-towelrail/operation"
|
||||
#mqtt_remote_device1_command1: "BOOST"
|
||||
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Dual L1 Relay"
|
||||
relay_1_icon: "mdi:lightbulb"
|
||||
light_1_name: "Light 1 (Right Hand Bunker Light)"
|
||||
switch_2_name: "Dual L2 Relay"
|
||||
relay_2_icon: "mdi:lightbulb"
|
||||
light_2_name: "Light 2 (Cool White Overhead Lights)"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -139,24 +151,24 @@ mqtt:
|
||||
# Direct MQTT control for relays via serial commands
|
||||
on_message:
|
||||
# Relay 1 control
|
||||
- topic: "${mqtt_topic}/relay1/set"
|
||||
- topic: "${mqtt_local_command_topic}/relay1/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay_1
|
||||
- light.turn_on: light_1
|
||||
- topic: "${mqtt_topic}/relay1/set"
|
||||
- topic: "${mqtt_local_command_topic}/relay1/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay_1
|
||||
- light.turn_off: light_1
|
||||
|
||||
# Relay 2 control
|
||||
- topic: "${mqtt_topic}/relay2/set"
|
||||
- topic: "${mqtt_local_command_topic}/relay2/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay_2
|
||||
- light.turn_on: light_2
|
||||
- topic: "${mqtt_topic}/relay2/set"
|
||||
- topic: "${mqtt_local_command_topic}/relay2/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay_2
|
||||
@@ -206,14 +218,14 @@ binary_sensor:
|
||||
#############################################
|
||||
switch:
|
||||
- platform: template
|
||||
name: "Dual L1 Relay"
|
||||
name: "${switch_1_name}"
|
||||
id: relay_1
|
||||
optimistic: true
|
||||
icon: "${relay_icon}"
|
||||
icon: "${relay_1_icon}"
|
||||
internal: true
|
||||
turn_on_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay1/state"
|
||||
topic: "${mqtt_local_status_topic}/relay1/state"
|
||||
payload: "ON"
|
||||
- if:
|
||||
condition:
|
||||
@@ -224,7 +236,7 @@ switch:
|
||||
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
|
||||
turn_off_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay1/state"
|
||||
topic: "${mqtt_local_status_topic}/relay1/state"
|
||||
payload: "OFF"
|
||||
- if:
|
||||
condition:
|
||||
@@ -234,14 +246,14 @@ switch:
|
||||
else:
|
||||
- uart.write: [0xA0, 0x04, 0x02, 0xA1]
|
||||
- platform: template
|
||||
name: "Dual L2 Relay"
|
||||
name: "${switch_2_name}"
|
||||
id: relay_2
|
||||
optimistic: true
|
||||
icon: "${relay_icon}"
|
||||
icon: "${relay_2_icon}"
|
||||
internal: true
|
||||
turn_on_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay2/state"
|
||||
topic: "${mqtt_local_status_topic}/relay2/state"
|
||||
payload: "ON"
|
||||
- if:
|
||||
condition:
|
||||
@@ -252,7 +264,7 @@ switch:
|
||||
- uart.write: [0xA0, 0x04, 0x03, 0xA1]
|
||||
turn_off_action:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_topic}/relay2/state"
|
||||
topic: "${mqtt_local_status_topic}/relay2/state"
|
||||
payload: "OFF"
|
||||
- if:
|
||||
condition:
|
||||
@@ -288,7 +300,7 @@ output:
|
||||
##########################################################################################
|
||||
light:
|
||||
- platform: binary
|
||||
name: "Light 1 (Right Hand Bunker Light)"
|
||||
name: "${light_1_name}"
|
||||
id: light_1
|
||||
output: light_output_1
|
||||
|
||||
|
||||
@@ -44,12 +44,13 @@ substitutions:
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
@@ -60,6 +61,8 @@ packages:
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
|
||||
@@ -42,24 +42,27 @@ substitutions:
|
||||
switch_2_name: "Daytime Lights" # This is virtual only, no power connected to 2nd relay
|
||||
switch_3_name: "Spare" # This is virtual only, no power connected to 3rd relay
|
||||
|
||||
#############################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
# common_mqtt: !include
|
||||
# file: common/mqtt_common.yaml
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
|
||||
@@ -42,14 +42,15 @@ substitutions:
|
||||
mqtt_device_name: "office-usbhub-power"
|
||||
mqtt_main_topic: "${mqtt_main_command_topic}/${mqtt_device_name}" # Topic we will use to command stuff from external without HA
|
||||
|
||||
#########################################################################################
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
@@ -60,6 +61,8 @@ packages:
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
|
||||
@@ -83,19 +83,26 @@ substitutions:
|
||||
evening_off_default: "1350" # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
|
||||
|
||||
##########################################################################################
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -104,12 +111,6 @@ packages:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Web and MQTT Packages
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV3: !include
|
||||
file: common/athompowermonv3_common.yaml
|
||||
@@ -134,6 +135,9 @@ esphome:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
on_boot:
|
||||
then:
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
@@ -184,31 +188,31 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -220,28 +224,26 @@ globals:
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: false
|
||||
restore_value: true
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
# Not restored, so it resets each boot.
|
||||
####################################################
|
||||
- id: current_mins
|
||||
type: int
|
||||
restore_value: false
|
||||
restore_value: true
|
||||
initial_value: "720" # 720 is 12:00 Noon
|
||||
|
||||
####################################################
|
||||
# boost_timer: counts minutes in BOOST mode
|
||||
# After 'boost_duration' minutes, revert to TIMER.
|
||||
# Not restored, so each boot starts fresh at 0.
|
||||
####################################################
|
||||
- id: boost_timer
|
||||
type: int
|
||||
restore_value: false
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
##########################################################################################
|
||||
@@ -576,6 +578,23 @@ button:
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
- platform: template
|
||||
name: "Default timer settings"
|
||||
id: default_timer_settings_button
|
||||
icon: "mdi:restore"
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// Restore all timing globals to their YAML defaults
|
||||
id(morning_on) = ${morning_on_default};
|
||||
id(morning_off) = ${morning_off_default};
|
||||
id(evening_on) = ${evening_on_default};
|
||||
id(evening_off) = ${evening_off_default};
|
||||
id(boost_duration)= ${boost_duration_default};
|
||||
// Reset mode to TIMER and clear any running boost
|
||||
id(operation_mode)= 2;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Default timer settings applied");
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
|
||||
@@ -82,19 +82,26 @@ substitutions:
|
||||
evening_off_default: "1350" # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES
|
||||
# https://esphome.io/components/esphome.html
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -103,12 +110,6 @@ packages:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Web and MQTT Packages
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV3: !include
|
||||
file: common/athompowermonv3_common.yaml
|
||||
@@ -133,6 +134,9 @@ esphome:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
on_boot:
|
||||
then:
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
@@ -183,31 +187,31 @@ globals:
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: False
|
||||
restore_value: true
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
@@ -219,14 +223,13 @@ globals:
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: True
|
||||
restore_value: true
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
# Not restored, so it resets each boot.
|
||||
####################################################
|
||||
- id: current_mins
|
||||
type: int
|
||||
@@ -236,7 +239,6 @@ globals:
|
||||
####################################################
|
||||
# boost_timer: counts minutes in BOOST mode
|
||||
# After 'boost_duration' minutes, revert to TIMER.
|
||||
# Not restored, so each boot starts fresh at 0.
|
||||
####################################################
|
||||
- id: boost_timer
|
||||
type: int
|
||||
@@ -575,6 +577,23 @@ button:
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
- platform: template
|
||||
name: "Default timer settings"
|
||||
id: default_timer_settings_button
|
||||
icon: "mdi:restore"
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// Restore all timing globals to their YAML defaults
|
||||
id(morning_on) = ${morning_on_default};
|
||||
id(morning_off) = ${morning_off_default};
|
||||
id(evening_on) = ${evening_on_default};
|
||||
id(evening_off) = ${evening_off_default};
|
||||
id(boost_duration)= ${boost_duration_default};
|
||||
// Reset mode to TIMER and clear any running boost
|
||||
id(operation_mode)= 2;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Default timer settings applied");
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
|
||||
@@ -28,7 +28,8 @@ substitutions:
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-underhouselights_ip
|
||||
mqtt_main_command_topic: !secret mqtt_main_command_topic
|
||||
mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
|
||||
mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
|
||||
|
||||
# Device Settings
|
||||
log_level: "ERROR" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
@@ -36,7 +37,8 @@ substitutions:
|
||||
|
||||
# MQTT Controls
|
||||
mqtt_device_name: "underhouse-lights-control"
|
||||
mqtt_main_topic: "${mqtt_main_command_topic}/${mqtt_device_name}" # Topic we will use to command stuff from external without HA
|
||||
mqtt_local_command_topic: "${mqtt_local_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA
|
||||
mqtt_local_status_topic: "${mqtt_local_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Underhouse Entrance Lights"
|
||||
@@ -54,12 +56,13 @@ substitutions:
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
@@ -70,6 +73,8 @@ packages:
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
@@ -252,12 +257,40 @@ status_led:
|
||||
mqtt:
|
||||
on_message:
|
||||
# Relay 1 control
|
||||
- topic: "${mqtt_main_topic}/relay1/set"
|
||||
- topic: "${mqtt_local_command_topic}/relay1/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay1
|
||||
- topic: "${mqtt_main_topic}/relay1/set"
|
||||
- topic: "${mqtt_local_command_topic}/relay1/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay1
|
||||
# Relay 2 control
|
||||
- topic: "${mqtt_local_command_topic}/relay2/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay2
|
||||
- topic: "${mqtt_local_command_topic}/relay2/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay2
|
||||
# Relay 3 control
|
||||
- topic: "${mqtt_local_command_topic}/relay3/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay3
|
||||
- topic: "${mqtt_local_command_topic}/relay3/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay3
|
||||
# Relay 4 control
|
||||
- topic: "${mqtt_local_command_topic}/relay4/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay4
|
||||
- topic: "${mqtt_local_command_topic}/relay4/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay4
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user