multiple esphome device updates and new devices

esphome/common/network_common_fallback.yaml

@@ -0,0 +1,81 @@
+substitutions:
+  ##############################################
+  # SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
+  # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
+  #############################################
+  wifi_ssid: !secret ha_wifi_ssid
+  wifi_password: !secret ha_wifi_password
+  fallback_ap_password: !secret fallback_ap_password
+
+  # Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
+  wifi_fast_connect: "false"
+
+  # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
+  dns_domain: ".local"
+
+  # Automatically add the mac address to the name
+  # eg so you can use a single firmware for all devices
+  add_mac_suffix: "false"
+
+  # Enable or disable the use of IPv6 networking on the device
+  ipv6_enable: "false"
+  
+  # Add these if we are giving it a static ip, or remove them in the Wifi section
+  static_ip_subnet: !secret ha_wifi_subnet
+  static_ip_gateway: !secret ha_wifi_gateway
+  static_ip_dns1: !secret ha_wifi_gateway
+
+#############################################
+# Common Wifi Settings
+# https://esphome.io/components/wifi.html
+#
+# Power Save mode (can reduce wifi reliability)
+# NONE (least power saving, Default for ESP8266)
+# LIGHT (Default for ESP32)
+# HIGH (most power saving)
+#############################################
+wifi:
+  ssid: ${wifi_ssid}
+  password: ${wifi_password}
+  #enable_rrm: true           # (ESP32 only) enable 802.11k Radio Resource Management
+  #enable_btm: true           # (ESP32 only) enable 802.11v BSS Transition Management
+  #power_save_mode: LIGHT   # https://esphome.io/components/wifi.html#wifi-power-save-mode
+  manual_ip: # optional static IP address
+    static_ip: ${local_static_ip_address}
+    gateway: ${static_ip_gateway}
+    subnet: ${static_ip_subnet}
+    dns1: ${static_ip_dns1}
+  ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
+    ssid: ${device_name} AP
+    password: ${fallback_ap_password}
+    ap_timeout: 10min # Time until it brings up fallback AP. default is 1min
+  # Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
+  fast_connect: "${wifi_fast_connect}"
+  # Define dns domain / suffix to add to hostname
+  domain: "${dns_domain}"
+
+#captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
+
+#############################################
+# Enable Over the Air Update Capability
+# https://esphome.io/components/ota.html?highlight=ota
+#############################################
+ota:
+  - platform: esphome
+    password: ${local_ota_pass}
+    version: 2
+
+#############################################
+# Safe Mode
+# Safe mode will detect boot loops
+# https://esphome.io/components/safe_mode
+#############################################
+safe_mode:
+
+#############################################
+# Network
+# global configuration for all types of networks
+# https://esphome.io/components/network.html
+#############################################
+network:
+  enable_ipv6: ${ipv6_enable}