zorruno/zorruno-homeassistant
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

esphome pmb 6 button switch - all in 1 yaml

Browse Source
This commit is contained in:
root
2025-08-05 13:31:08 +12:00
parent e96336dbc4
commit ba4f7a19cc
1 changed files with 316 additions and 61 deletions
Download Patch File Download Diff File Expand all files Collapse all files

373
esphome/esp-6buttontest-pmb.yaml
View File

@@ -3,40 +3,67 @@
# PMB Electronics 6 Button ESP32 Switch
# V1.0 2025-08-04 Initial Version
##########################################################################################
# PMB Details Page https://rcbeacon.com/blog/?p=5488
# PMB Product Details Page https://rcbeacon.com/blog/?p=5488
#
# DEVICE GPIO
#
# OPERATION (as set up at V1.0)
# 1. There are 4 buttons that toggle a virtual relay and turn on the
# associated LED when pressed. Inputs are debounced.
# 2. Button 5 does the same, but also if double pressed, a different V relay switches on
# and the LED slowly pulses. If held down for 2 seconds, a 3rd V relay switches on and the
# LED fast pulses (the 3 relays are exclusive, ie interlocked)
# 3. The knob gives a reported value of 0-100% when turned (as well as the adc value).
# this is calibratable
# 4. The system supply voltage is reported (10-20V) anbd is also calibratable.
#
# NOTES
# 1. To Flash via ESPHome, you likely have to connect to the computer, start the flash
# process then hold down the I00 button. I think GPIO12 is preventing the flash process
# then hold down I00 button. I think GPIO12 connection is preventing the flash process.
# 2. OTA flash to an Existing Tasmota device is likely a bit hard with and ESP32 as they
# expect a signed Tasmota binary... and partition layout needs to be fixed anyway
# 3. EspHome warns on compiling: "legacy adc driver is deprecated, please migrate to use
# esp_adc/adc_oneshot.h and esp_adc/adc_continuous.h for oneshot mode and continuous mode
# drivers respectively" [-Wcpp]""
# drivers respectively" [-Wcpp]" (I'm not bothered with this)
# 4. Normally I'd include SNTP for timing functions, and uptime diagnostics etc.
# I have commented this out in the packages section as not sure it is really needed here
#
##########################################################################################
##########################################################################################
##########################################################################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# USUALLY YOU WILL ONLY NEED TO CHANGE VALUES UNDER THIS SECTION
# If NOT using a secrets file, just replace "!secret my_key" with the password etc (in quotes)
##########################################################################################
substitutions:
# Device Naming
device_name: "esp-6buttontest-pmb" #the filename should be the device_name.yaml
device_name: "esp-6buttontest-pmb" # the filename should be the device_name.yaml
friendly_name: "PMB Light Switch Test"
description_comment: "Multi Button Wallswitch in standard AU/NZ flush size. 5 Buttons with LEDs and one Knob"
description_comment: "Multi Button Wallswitch in standard AU/NZ flush size. In this case 5 Buttons with LEDs and one Knob"
device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
# Wifi details
wifi_ssid: !secret ha_wifi_ssid
wifi_password: !secret ha_wifi_password
fallback_ap_password: !secret fallback_ap_password # if it doesn't connect, it will create its own AP
# Passwords
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
static_ip_address: !secret esp-6buttontest-pmb_ip
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
pwm_freq: "1000Hz"
ledc_bits: "12"
# Add these if we are giving it a static ip, or remove them in the Wifi section
static_ip_subnet: !secret ha_wifi_subnet
static_ip_gateway: !secret ha_wifi_gateway
static_ip_dns1: !secret ha_wifi_dns1
static_ip_dns2: !secret ha_wifi_dns2
# MQTT Settings
mqtt_server: !secret ha_mqtt_server
mqtt_username: !secret ha_mqtt_username
mqtt_password: !secret ha_mqtt_password
mqtt_topic: "esphome" # main topic for the mqtt server, call it what you like
# Switch Naming
switch_1_name: "Red"
@@ -51,39 +78,180 @@ substitutions:
variable_1_full_scale: "3.14" # ADC reading when at 100% (adjust after calibration)
variable_1_min_scale: "0.14" # volts at ADC for 0% (adjust after calibration)
# Device Settings
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
update_interval: "60s" # update time for for general sensors etc
pwm_freq: "1000Hz" # espHome default is 1000Hz, but will go much higher... (not much point for a switch LED)
ledc_bits: "12" # espHome default resolution is 12 bits
# Network reconnect every x hours to ensure best access point
# This is my own script. No need to use if only one AP or it is always fixed.
base_interval_hours: "23" # Base interval in hours
random_offset_max_minutes: "59" # Max random offset in minutes
# Enables faster network connections, with last connected SSID being connected to and
# no full scan for SSID being undertaken
wifi_fast_connect: "false"
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as
# athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
dns_domain: ".local"
# Automatically add the mac address to the name eg so you can use a single firmware for all devices
# I don't tend to like doing this, but good for many identical devices
add_mac_suffix: "false"
# Enable or disable the use of IPv6 networking on the device
ipv6_enable: "false"
##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
common_wifi: !include
file: common/network_common.yaml
vars:
local_device_name: "${device_name}"
local_static_ip_address: "${static_ip_address}"
local_ota_pass: "${ota_pass}"
common_api: !include
file: common/api_common.yaml
vars:
local_api_key: "${api_key}"
# NOTE: ALL COMMENTED AS FOR THIS TEST EVERYTHING IS IN ONE YAML FILE (except no SNTP)
##########################################################################################
#packages:
#common_wifi: !include
# file: common/network_common.yaml
# vars:
# local_device_name: "${device_name}"
# local_static_ip_address: "${static_ip_address}"
# local_ota_pass: "${ota_pass}"
#common_api: !include
# file: common/api_common.yaml
# vars:
# local_api_key: "${api_key}"
#common_webportal: !include
# file: common/webportal_common.yaml
common_mqtt: !include
file: common/mqtt_common.yaml
vars:
local_device_name: "${device_name}"
common_sntp: !include
file: common/sntp_common.yaml
common_general_sensors: !include
file: common/sensors_common.yaml
vars:
local_friendly_name: "${friendly_name}"
local_update_interval: "${update_interval}"
#common_mqtt: !include
# file: common/mqtt_common.yaml
# vars:
# local_device_name: "${device_name}"
#common_sntp: !include
# file: common/sntp_common.yaml
#common_general_sensors: !include
# file: common/sensors_common.yaml
# vars:
# local_friendly_name: "${friendly_name}"
# local_update_interval: "${update_interval}"
#############################################
##########################################################################################
# Common Wifi Settings
# https://esphome.io/components/wifi.html
#
# Power Save mode (can reduce wifi reliability)
# NONE (least power saving, Default for ESP8266)
# LIGHT (Default for ESP32)
# HIGH (most power saving)
##########################################################################################
wifi:
ssid: ${wifi_ssid}
password: ${wifi_password}
#enable_rrm: true # (ESP32 only) enable 802.11k Radio Resource Management
#enable_btm: true # (ESP32 only) enable 802.11v BSS Transition Management
#power_save_mode: LIGHT # https://esphome.io/components/wifi.html#wifi-power-save-mode
manual_ip: # optional static IP address
static_ip: ${static_ip_address}
gateway: ${static_ip_gateway}
subnet: ${static_ip_subnet}
dns1: ${static_ip_dns1}
dns2: ${static_ip_dns2}
ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
ssid: ${device_name} AP
password: ${fallback_ap_password}
ap_timeout: 10min # Time until it brings up fallback AP. default is 1min
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
fast_connect: "${wifi_fast_connect}"
# Define dns domain / suffix to add to hostname
domain: "${dns_domain}"
#captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails
##########################################################################################
# Enable Over the Air Update Capability
# https://esphome.io/components/ota.html?highlight=ota
##########################################################################################
ota:
- platform: esphome
password: ${ota_pass}
version: 2
##########################################################################################
# Safe Mode
# Safe mode will detect boot loops
# https://esphome.io/components/safe_mode
##########################################################################################
safe_mode:
##########################################################################################
# Network
# global configuration for all types of networks
# https://esphome.io/components/network.html
##########################################################################################
network:
enable_ipv6: ${ipv6_enable}
##########################################################################################
# SCRIPT
# Restart Networking every x hours + rand mins. Starts on reboot and always runs
# This ensure that the device is connected to the best AP, but no need for it
# if one AP and it is always reliable.
##########################################################################################
script:
- id: random_reconnect
mode: restart
then:
- lambda: |-
// Compute total delay: base hours + random offset minutes
uint32_t extra;
#if defined(ESP32)
// ESP32 (both Arduino & IDF builds) uses esp_random()
extra = esp_random() % (${random_offset_max_minutes} + 1);
#elif defined(ESP8266)
// ESP8266 Arduino core
extra = os_random() % (${random_offset_max_minutes} + 1);
#else
// Fallback to esp_random() on other platforms
extra = esp_random() % (${random_offset_max_minutes} + 1);
#endif
uint32_t total_s = ${base_interval_hours} * 3600 + extra * 60;
ESP_LOGI("random_reconnect", "Next reconnect in %u seconds", total_s);
// Delay inside lambda (blocks script execution but OK for reconnect timing)
delay(total_s * 1000);
- logger.log: "network_check: performing reconnect"
- wifi.disable: {}
- delay: 1s
- wifi.enable: {}
- script.execute: random_reconnect
##########################################################################################
# MQTT Monitoring
# https://esphome.io/components/mqtt.html?highlight=mqtt
# MUST also have api enabled if you enable MQTT!
##########################################################################################
mqtt:
broker: ${mqtt_server}
topic_prefix: ${mqtt_topic}/${device_name}
username: ${mqtt_username}
password: ${mqtt_password}
discovery: False # enable entity discovery (true is default)
discover_ip: False # enable device discovery (true is default)
id: mqtt_client
reboot_timeout: 0s # same for MQTT
##########################################################################################
# Enable the Home Assistant API
# https://esphome.io/components/api.html
##########################################################################################
api:
encryption:
key: ${api_key}
reboot_timeout: 0s # disables watchdog reboot on API failure
##########################################################################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
##########################################################################################
esphome:
name: ${device_name}
friendly_name: ${friendly_name}
@@ -106,9 +274,12 @@ esp32:
preferences:
flash_write_interval: 5min # not too important but anything written for reboot mem will wear the flash
##########################################################################################
# GLOBALS - State storage for vrelays
# GLOBAL VARIABLES
# https://esphome.io/components/globals.html
##########################################################################################
# We are using globals here to store the states of the virtual relays
# They will also be restored on power loss.
##########################################################################################
globals:
- id: vrelay_1_state
@@ -140,10 +311,10 @@ globals:
restore_value: yes
initial_value: 'false'
#############################################
##########################################################################################
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
#############################################
##########################################################################################
logger:
level: ${log_level} #INFO Level suggested, or DEBUG for testing
@@ -180,7 +351,6 @@ binary_sensor:
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_1
- platform: gpio
pin:
number: GPIO35
@@ -192,7 +362,6 @@ binary_sensor:
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_2
- platform: gpio
pin:
number: GPIO05
@@ -204,7 +373,6 @@ binary_sensor:
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_3
- platform: gpio
pin:
number: GPIO33
@@ -216,7 +384,6 @@ binary_sensor:
- delayed_off: 50ms
on_press:
- switch.toggle: vrelay_4
- platform: gpio
pin:
number: GPIO16
@@ -231,13 +398,11 @@ binary_sensor:
- ON for 50ms to 500ms
then:
- switch.toggle: vrelay_5b
# Hold
- timing:
- ON for at least 2s
then:
- switch.toggle: vrelay_5c
# Single click
- timing:
- ON for 50ms to 500ms
@@ -245,6 +410,7 @@ binary_sensor:
then:
- switch.toggle: vrelay_5
# FUTURE: Board allows for 6 buttons
#- platform: gpio
# pin:
# number: GPIO12
@@ -257,6 +423,12 @@ binary_sensor:
# on_press:
# - switch.toggle: vrelay_6
## DIAGNOSTIC ONLY SENSORS BELOW ##
- platform: status
name: "Network Status"
icon: mdi:check-network-outline
entity_category: "diagnostic"
##########################################################################################
# OUTPUT COMPONENT
# https://esphome.io/components/light/index.html
@@ -287,6 +459,12 @@ output:
pin: GPIO17
frequency: ${pwm_freq}
# FUTURE: Board allows for 6 buttons
#- platform: ledc
# id: led6_output
# pin: GPIOXX
# frequency: ${pwm_freq}
##########################################################################################
# LIGHT COMPONENT
# https://esphome.io/components/light/index.html
@@ -325,6 +503,12 @@ light:
- state: OFF
duration: 500ms
# FUTURE: Board allows for 6 buttons
#- platform: monochromatic
# id: led6
# output: led6_output
# name: "LED 6: ${switch_6_name}"
##########################################################################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
@@ -438,24 +622,32 @@ switch:
id(vrelay_5c_state) = false;
#- switch.turn_off: vrelay_5
# FUTURE: Board allows for 6 buttons
#- platform: template
# name: "Output 6: ${switch_6_name}"
# id: vrelay_6
# restore_mode: RESTORE_DEFAULT_OFF
# optimistic: false
# lambda: |-
# return id(vrelay_6_state);
# turn_on_action:
# - light.turn_on: led6
# - lambda: |-
# id(vrelay_6_state) = true;
# turn_off_action:
# - light.turn_off: led6
# - lambda: |-
# id(vrelay_6_state) = false;
##########################################################################################
# SENSOR COMPONENT
# https://esphome.io/components/sensor/
##########################################################################################
sensor:
# Raw ADC reading from GPIO36
# ADC Component https://esphome.io/components/sensor/adc.html
- platform: adc
pin: GPIO36
id: dimmer_raw
name: "Dimmer Raw"
name: "${variable_1_name} Raw"
attenuation: 11db
update_interval: 0.5s
on_value:
@@ -463,28 +655,22 @@ sensor:
- lambda: |-
// Convert raw ADC (x) to volts
float volts = x;
// Apply min/max calibration
float min_v = ${variable_1_min_scale};
float max_v = ${variable_1_full_scale};
// Calculate percentage between min and max
float pct = ((volts - min_v) / (max_v - min_v)) * 100.0;
// Clamp result between 0 and 100
if (pct > 100.0) pct = 100.0;
if (pct < 0.0) pct = 0.0;
// Publish to percentage sensor
id(dimmer_percent).publish_state(pct);
# Percentage sensor derived from raw ADC
- platform: template
id: dimmer_percent
name: "${variable_1_name}"
unit_of_measurement: "%"
accuracy_decimals: 0
# External supply voltage from GPIO39
- platform: adc
pin: GPIO39
@@ -493,10 +679,79 @@ sensor:
attenuation: 11db # Up to ~3.9V at ADC pin
update_interval: 2s
filters:
- calibrate_linear:
- calibrate_linear: # https://esphome.io/components/sensor/#calibrate-linear
# Format: raw_value -> real_voltage_at_pin
- 00.66 -> 10.00 # Example: ADC reads 0.80 when pin is actually 3.20V
- 00.99 -> 15.00 # Example: ADC reads 1.00 when pin is actually 4.00V
- 01.30 -> 20.00 # Example: ADC reads 0.90 when pin is actually 3.60V
- 00.66 -> 10.00 # Example: ADC reads X when pin is -> actually Y
- 00.99 -> 15.00
- 01.30 -> 20.00
#- multiply: 4.00 # Voltage divider ratio
unit_of_measurement: "V"
## DIAGNOSTIC ONLY SENSORS BELOW ##
- platform: uptime # Uptime for this device in seconds
name: "Uptime (s):"
update_interval: ${update_interval}
id: uptime_sensor
entity_category: "diagnostic"
- platform: wifi_signal # Wifi Strength
name: "Wifi (dB):"
id: wifi_signal_db
update_interval: ${update_interval}
entity_category: "diagnostic"
- platform: copy # Reports the WiFi signal strength in %
source_id: wifi_signal_db
name: "WiFi (%):"
filters:
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
unit_of_measurement: "% Max"
entity_category: "diagnostic"
device_class: ""
##########################################################################################
# Text Sensors
# https://esphome.io/components/text_sensor/index.html
##########################################################################################
text_sensor:
## DIAGNOSTIC ONLY SENSORS BELOW ##
- platform: version
name: "Version:"
entity_category: "diagnostic"
- platform: wifi_info
ip_address:
icon: mdi:ip-network
entity_category: diagnostic
name: "IP Address:"
ssid:
name: "Connected SSID"
icon: mdi:wifi-strength-2
entity_category: diagnostic
mac_address:
name: "MAC Address:"
icon: mdi:network-pos
entity_category: diagnostic
- platform: uptime # Uptime for this device human readable
name: "Uptime:"
icon: mdi:clock-start
update_interval: ${update_interval}
entity_category: "diagnostic"
##########################################################################################
# BUTTON COMPONENT
# https://esphome.io/components/button/
##########################################################################################
# Diagnostic buttons ued here and non-active, activated if needed in HA
##########################################################################################
button:
## DIAGNOSTIC ONLY BUTTONS BELOW ##
- platform: safe_mode
name: "Safe Mode Restart:"
entity_category: "diagnostic"
disabled_by_default: true
- platform: restart
name: "Restart:"
entity_category: "diagnostic"
disabled_by_default: true
- platform: factory_reset
name: "FACTORY RESET:"
entity_category: "diagnostic"
disabled_by_default: true