diff --git a/esphome/esp-mmwave-office-7776ec copy.yaml.old b/esphome/esp-mmwave-office-7776ec copy.yaml.old deleted file mode 100644 index 79d55a4..0000000 --- a/esphome/esp-mmwave-office-7776ec copy.yaml.old +++ /dev/null @@ -1,370 +0,0 @@ -# https://digiblur.com/2023/05/24/esphome-mmwave-presence-how-to-guide/ - -substitutions: - name: esp-mmwave-office-7776ec - friendly_name: esp-mmwave-office - update_time: 30s - -esphome: - name: ${name} - friendly_name: ${friendly_name} - name_add_mac_suffix: false - #project: - #name: esphome.web - #version: '1.0' - on_boot: #LD1125H Initial Setting - priority: -200 - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th1st = "mth1=" + str_sprintf("%.0f",id(LD1125H_mth1).state) +"\r\n"; - return std::vector(th1st.begin(), th1st.end()); - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th2st = "mth2=" + str_sprintf("%.0f",id(LD1125H_mth2).state) +"\r\n"; - return std::vector(th2st.begin(), th2st.end()); - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th3st = "mth3=" + str_sprintf("%.0f",id(LD1125H_mth3).state) +"\r\n"; - return std::vector(th3st.begin(), th3st.end()); - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string rmaxst = "rmax=" + str_sprintf("%.1f",id(LD1125H_rmax).state) +"\r\n"; - return std::vector(rmaxst.begin(), rmaxst.end()); - - - -############################################# -# ESPHome Logging Enable -############################################# -# NOTE: Baudrate set to 0 as we are using the UART with PZEM -logger: - level: INFO #You Can Use "INFO" Level - baud_rate: 0 - -############################################# -# Enable the Home Assistant API -############################################# -api: - #encryption: - # key: !secret esp-mainovenmonitor_api_key - -############################################# -# Enable Over the Air Update Capability -# Safe mode will detect boot loops -############################################# -ota: - # safe_mode: true - # password: !secret esp-mainovenmonitor_ota_pass - -############################################# -# Use Wifi -############################################# -wifi: - ssid: !secret wifi_ssid - password: !secret wifi_password - power_save_mode: LIGHT - # Details for fallback hotspot (captive portal) - # in case wifi connection fails - ap: - ssid: "MMwave Office Fallback Hotspot" - password: !secret fallback_ap_password -# manual_ip: -# static_ip: 192.168.x.x -# gateway: 192.168.X.x -# subnet: 255.255.255.0 - - -# Allow provisioning Wi-Fi via serial -#improv_serial: - -############################################# -# Fallback captive portal -############################################# -# In combination with the `ap` this allows the user -# to provision wifi credentials to the device via WiFi AP. -captive_portal: - -#dashboard_import: -# package_import_url: github://esphome/example-configs/esphome-web/esp32.yaml@main -# import_full_config: true - -# Sets up Bluetooth LE (Only on ESP32) to allow the user -# to provision wifi credentials to the device. -##esp32_improv: -## authorizer: none - -############################################# -# Web Portal for display and monitoring -############################################# -#web_server: -# port: 80 -# auth: -# username: !secret web_server_username -# password: !secret web_server_password - - -i2c: - sda: GPIO19 - scl: GPIO21 - scan: True - -#esp32: -# board: esp32dev -# framework: -# type: arduino -esp32: - board: nodemcu-32s - framework: - type: esp-idf #Suggest Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. - -external_components: - - source: - type: git - url: https://github.com/ssieb/custom_components #Thanks for @ssieb components. - components: [ serial ] - - -uart: - id: LD1125H_UART_BUS - rx_pin: GPIO16 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang - tx_pin: GPIO17 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang -# rx_pin: GPIO1 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang -# tx_pin: GPIO0 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang - baud_rate: 115200 - data_bits: 8 - stop_bits: 1 - parity: NONE -# debug: -# direction: BOTH -# dummy_receiver: false -# after: -# delimiter: "\n" -# sequence: -# - lambda: UARTDebug::log_string(direction, bytes); -globals: - - id: LD1125H_Last_Time - type: time_t - restore_value: no - initial_value: time(NULL) - - id: LD1125H_Last_Mov_Time - type: time_t - restore_value: no - initial_value: time(NULL) - - id: LD1125H_Clearence_Status - type: bool - restore_value: no - initial_value: "false" -status_led: - pin: - number: GPIO2 #ESP32 OnBroad LED - inverted: false -#web_server: #Avoid Using Web Server To Prevent Hang -# port: 80 -interval: - - interval: 1s #Clearance Scan Time - setup_priority: -200 - then: - lambda: |- - if ((time(NULL)-id(LD1125H_Last_Time))>id(LD1125H_Clear_Time).state) { - if ((id(LD1125H_Clearence_Status) == false) || (id(LD1125H_Occupancy).state != "Clearance")) { - id(LD1125H_Occupancy).publish_state("Clearance"); - id(LD1125H_Clearence_Status) = true; - } - if (id(LD1125H_MovOcc_Binary).state == true) { - id(LD1125H_MovOcc_Binary).publish_state(false); - } - if (id(LD1125H_Mov_Binary).state == true) { - id(LD1125H_Mov_Binary).publish_state(false); - } - } -number: - - platform: template - name: ${upper_devicename} LD1125H mth1 #mth1 is 0~2.8m Sensitivity. - id: LD1125H_mth1 - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "60.0" #Default mth1 Setting - min_value: 10.0 - max_value: 600.0 - step: 5.0 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th1st = "mth1=" + str_sprintf("%.0f",x) +"\r\n"; - return std::vector(th1st.begin(), th1st.end()); - - platform: template - name: ${upper_devicename} LD1125H mth2 #mth2 is 2.8~8m Sensitivity. - id: LD1125H_mth2 - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "30" #Default mth2 Setting - min_value: 5 - max_value: 300 - step: 5 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th2st = "mth2=" + str_sprintf("%.0f",x) +"\r\n"; - return std::vector(th2st.begin(), th2st.end()); - - platform: template - name: ${upper_devicename} LD1125H mth3 #mth3 is above 8m Sensitivity. - id: LD1125H_mth3 - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "20" #Default mth3 Setting - min_value: 5 - max_value: 200 - step: 5 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th3st = "mth3=" + str_sprintf("%.0f",x) +"\r\n"; - return std::vector(th3st.begin(), th3st.end()); - - platform: template - name: ${upper_devicename} LD1125H rmax #rmax is max detection distance. - id: LD1125H_rmax - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "8" #Default rmax Setting - min_value: 0.4 - max_value: 12 - step: 0.1 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string rmaxst = "rmax=" + str_sprintf("%.1f",x) +"\r\n"; - return std::vector(rmaxst.begin(), rmaxst.end()); - - platform: template - name: ${upper_devicename} LD1125H Clearence Time - id: LD1125H_Clear_Time - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "5" #LD1125H Mov/Occ > Clearence Time Here - min_value: 0.5 - max_value: 20 - step: 0.5 - - platform: template - name: ${upper_devicename} LD1125H Movement Time - id: LD1125H_Mov_Time - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "1" #LD1125H Mov > Occ Time Here - min_value: 0.5 - max_value: 10 - step: 0.5 -sensor: - - platform: bme280_i2c - temperature: - name: ${upper_devicename} BME280 Temp - accuracy_decimals: 1 - oversampling: 2x - pressure: - name: ${upper_devicename} BME280 Pressure - oversampling: 2x - humidity: - name: ${upper_devicename} BME280 Humidity - accuracy_decimals: 1 - oversampling: 2x - address: 0x76 - update_interval: ${update_time} -# - platform: aht10 -# temperature: -# accuracy_decimals: 2 -# name: ${upper_devicename} AHT21 Temp -# humidity: -# accuracy_decimals: 2 -# name: ${upper_devicename} AHT21 Humidity -# update_interval: ${update_time} -# - platform: wifi_signal -# name: ${upper_devicename} WiFi Signal -# update_interval: 60s - - platform: uptime - name: ${upper_devicename} Uptime - - platform: template - name: ${upper_devicename} LD1125H Distance - id: LD1125H_Distance - icon: "mdi:signal-distance-variant" - unit_of_measurement: "m" - accuracy_decimals: 2 - filters: # Use Fliter To Debounce - - sliding_window_moving_average: - window_size: 8 - send_every: 2 - - heartbeat: 0.2s -text_sensor: - - platform: serial - uart_id: LD1125H_UART_BUS - name: ${upper_devicename} LD1125H UART Text - id: LD1125H_UART_Text - icon: "mdi:format-text" - internal: True #If Don't Want to See UART Receive Data, Set To True - on_value: - lambda: |- - if (id(LD1125H_UART_Text).state.substr(0,3) == "occ") { - id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str())); - if ((time(NULL)-id(LD1125H_Last_Mov_Time))>id(LD1125H_Mov_Time).state) { - id(LD1125H_Occupancy).publish_state("Occupancy"); - if (id(LD1125H_MovOcc_Binary).state == false) { - id(LD1125H_MovOcc_Binary).publish_state(true); - } - if (id(LD1125H_Mov_Binary).state == true) { - id(LD1125H_Mov_Binary).publish_state(false); - } - } - if (id(LD1125H_MovOcc_Binary).state == false) { - id(LD1125H_MovOcc_Binary).publish_state(true); - } - id(LD1125H_Last_Time) = time(NULL); - if (id(LD1125H_Clearence_Status) == true) { - id(LD1125H_Clearence_Status) = false; - } - } - else if (id(LD1125H_UART_Text).state.substr(0,3) == "mov") { - id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str())); - id(LD1125H_Occupancy).publish_state("Movement"); - if (id(LD1125H_MovOcc_Binary).state == false) { - id(LD1125H_MovOcc_Binary).publish_state(true); - } - if (id(LD1125H_Mov_Binary).state == false) { - id(LD1125H_Mov_Binary).publish_state(true); - } - id(LD1125H_Last_Mov_Time) = time(NULL); - id(LD1125H_Last_Time) = time(NULL); - if (id(LD1125H_Clearence_Status) == true) { - id(LD1125H_Clearence_Status) = false; - } - } - - platform: template - name: ${upper_devicename} LD1125H Occupancy Status - id: LD1125H_Occupancy - icon: "mdi:motion-sensor" -binary_sensor: - - platform: status - name: ${upper_devicename} Status - - platform: template - name: ${upper_devicename} LD1125H Occupancy or Movement - id: LD1125H_MovOcc_Binary - device_class: occupancy - - platform: template - name: ${upper_devicename} LD1125H Movement - id: LD1125H_Mov_Binary - device_class: motion \ No newline at end of file diff --git a/esphome/esphome-web-7776ec copy.yaml.old b/esphome/esphome-web-7776ec copy.yaml.old deleted file mode 100644 index 0b813a3..0000000 --- a/esphome/esphome-web-7776ec copy.yaml.old +++ /dev/null @@ -1,381 +0,0 @@ -# https://digiblur.com/2023/05/24/esphome-mmwave-presence-how-to-guide/ - -substitutions: - name: "esphome-web-7776ec" - friendly_name: "esp-mmwave-office" - upper_devicename: "esp-mmwave-office" - update_time: 30s - -esphome: - name: ${name} - friendly_name: ${friendly_name} - name_add_mac_suffix: false - #project: - #name: esphome.web - #version: '1.0' - on_boot: #LD1125H Initial Setting - priority: -200 - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th1st = "mth1=" + str_sprintf("%.0f",id(LD1125H_mth1).state) +"\r\n"; - return std::vector(th1st.begin(), th1st.end()); - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th2st = "mth2=" + str_sprintf("%.0f",id(LD1125H_mth2).state) +"\r\n"; - return std::vector(th2st.begin(), th2st.end()); - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th3st = "mth3=" + str_sprintf("%.0f",id(LD1125H_mth3).state) +"\r\n"; - return std::vector(th3st.begin(), th3st.end()); - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string rmaxst = "rmax=" + str_sprintf("%.1f",id(LD1125H_rmax).state) +"\r\n"; - return std::vector(rmaxst.begin(), rmaxst.end()); - - - - -i2c: - sda: GPIO19 - scl: GPIO21 - scan: True - - -############################################# -# ESPHome Logging Enable -############################################# -# NOTE: Baudrate set to 0 as we are using the UART with PZEM -logger: - level: INFO #You Can Use "INFO" Level - baud_rate: 0 - -############################################# -# Enable the Home Assistant API -############################################# -api: - #encryption: - # key: !secret esp-mainovenmonitor_api_key - -############################################# -# Enable Over the Air Update Capability -# Safe mode will detect boot loops -############################################# -ota: - # safe_mode: true - # password: !secret esp-mainovenmonitor_ota_pass - -############################################# -# Use Wifi -############################################# -wifi: - ssid: !secret wifi_ssid - password: !secret wifi_password - #power_save_mode: LIGHT - # Details for fallback hotspot (captive portal) - # in case wifi connection fails - ap: - ssid: "MMwave Office Fallback Hotspot" - password: !secret fallback_ap_password -# manual_ip: -# static_ip: 192.168.x.x -# gateway: 192.168.X.x -# subnet: 255.255.255.0 - -############################################# -# MQTT Monitoring -############################################# -mqtt: - broker: !secret mqtt_server - topic_prefix: esphome/esp-mmwave-office - username: !secret mqtt_username - password: !secret mqtt_password - -# Allow provisioning Wi-Fi via serial -#improv_serial: - -############################################# -# Fallback captive portal -############################################# -# In combination with the `ap` this allows the user -# to provision wifi credentials to the device via WiFi AP. -#captive_portal: - -#dashboard_import: -# package_import_url: github://esphome/example-configs/esphome-web/esp32.yaml@main -# import_full_config: true - -# Sets up Bluetooth LE (Only on ESP32) to allow the user -# to provision wifi credentials to the device. -##esp32_improv: -## authorizer: none - -############################################# -# Web Portal for display and monitoring -############################################# -#web_server: -# port: 80 -# auth: -# username: !secret web_server_username -# password: !secret web_server_password - - -#esp32: -# board: esp32dev -# framework: -# type: arduino -esp32: - board: esp32dev - framework: - type: esp-idf #Suggest Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. - -external_components: - - source: - type: git - url: https://github.com/ssieb/custom_components #Thanks for @ssieb components. - components: [ serial ] - - -uart: - id: LD1125H_UART_BUS - rx_pin: GPIO16 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang - tx_pin: GPIO17 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang -# rx_pin: GPIO1 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang -# tx_pin: GPIO0 #For ESP32, you can use any pin, Recommend Use UART_2, Don't use UART_0, It might Cause Boot Fail or System Hang - baud_rate: 115200 - data_bits: 8 - stop_bits: 1 - parity: NONE -# debug: -# direction: BOTH -# dummy_receiver: false -# after: -# delimiter: "\n" -# sequence: -# - lambda: UARTDebug::log_string(direction, bytes); -globals: - - id: LD1125H_Last_Time - type: time_t - restore_value: no - initial_value: time(NULL) - - id: LD1125H_Last_Mov_Time - type: time_t - restore_value: no - initial_value: time(NULL) - - id: LD1125H_Clearence_Status - type: bool - restore_value: no - initial_value: "false" -status_led: - pin: - number: GPIO2 #ESP32 OnBroad LED - inverted: false -#web_server: #Avoid Using Web Server To Prevent Hang -# port: 80 -interval: - - interval: 1s #Clearance Scan Time - setup_priority: -200 - then: - lambda: |- - if ((time(NULL)-id(LD1125H_Last_Time))>id(LD1125H_Clear_Time).state) { - if ((id(LD1125H_Clearence_Status) == false) || (id(LD1125H_Occupancy).state != "Clearance")) { - id(LD1125H_Occupancy).publish_state("Clearance"); - id(LD1125H_Clearence_Status) = true; - } - if (id(LD1125H_MovOcc_Binary).state == true) { - id(LD1125H_MovOcc_Binary).publish_state(false); - } - if (id(LD1125H_Mov_Binary).state == true) { - id(LD1125H_Mov_Binary).publish_state(false); - } - } -number: - - platform: template - name: ${upper_devicename} LD1125H mth1 #mth1 is 0~2.8m Sensitivity. - id: LD1125H_mth1 - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "60.0" #Default mth1 Setting - min_value: 10.0 - max_value: 600.0 - step: 5.0 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th1st = "mth1=" + str_sprintf("%.0f",x) +"\r\n"; - return std::vector(th1st.begin(), th1st.end()); - - platform: template - name: ${upper_devicename} LD1125H mth2 #mth2 is 2.8~8m Sensitivity. - id: LD1125H_mth2 - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "30" #Default mth2 Setting - min_value: 5 - max_value: 300 - step: 5 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th2st = "mth2=" + str_sprintf("%.0f",x) +"\r\n"; - return std::vector(th2st.begin(), th2st.end()); - - platform: template - name: ${upper_devicename} LD1125H mth3 #mth3 is above 8m Sensitivity. - id: LD1125H_mth3 - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "20" #Default mth3 Setting - min_value: 5 - max_value: 200 - step: 5 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string th3st = "mth3=" + str_sprintf("%.0f",x) +"\r\n"; - return std::vector(th3st.begin(), th3st.end()); - - platform: template - name: ${upper_devicename} LD1125H rmax #rmax is max detection distance. - id: LD1125H_rmax - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "8" #Default rmax Setting - min_value: 0.4 - max_value: 12 - step: 0.1 - set_action: - then: - - uart.write: - id: LD1125H_UART_BUS - data: !lambda |- - std::string rmaxst = "rmax=" + str_sprintf("%.1f",x) +"\r\n"; - return std::vector(rmaxst.begin(), rmaxst.end()); - - platform: template - name: ${upper_devicename} LD1125H Clearence Time - id: LD1125H_Clear_Time - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "5" #LD1125H Mov/Occ > Clearence Time Here - min_value: 0.5 - max_value: 20 - step: 0.5 - - platform: template - name: ${upper_devicename} LD1125H Movement Time - id: LD1125H_Mov_Time - icon: "mdi:cogs" - optimistic: true - restore_value: true #If you don't want to store the setting at ESP, set it to false. - initial_value: "1" #LD1125H Mov > Occ Time Here - min_value: 0.5 - max_value: 10 - step: 0.5 -sensor: - - platform: bme280_i2c - temperature: - name: ${upper_devicename} BME280 Temp - accuracy_decimals: 1 - oversampling: 2x - pressure: - name: ${upper_devicename} BME280 Pressure - oversampling: 2x - humidity: - name: ${upper_devicename} BME280 Humidity - accuracy_decimals: 1 - oversampling: 2x - address: 0x76 - update_interval: ${update_time} -# - platform: aht10 -# temperature: -# accuracy_decimals: 2 -# name: ${upper_devicename} AHT21 Temp -# humidity: -# accuracy_decimals: 2 -# name: ${upper_devicename} AHT21 Humidity -# update_interval: ${update_time} -# - platform: wifi_signal -# name: ${upper_devicename} WiFi Signal -# update_interval: 60s - - platform: uptime - name: ${upper_devicename} Uptime - - platform: template - name: ${upper_devicename} LD1125H Distance - id: LD1125H_Distance - icon: "mdi:signal-distance-variant" - unit_of_measurement: "m" - accuracy_decimals: 2 - filters: # Use Fliter To Debounce - - sliding_window_moving_average: - window_size: 8 - send_every: 2 - - heartbeat: 0.2s -text_sensor: - - platform: serial - uart_id: LD1125H_UART_BUS - name: ${upper_devicename} LD1125H UART Text - id: LD1125H_UART_Text - icon: "mdi:format-text" - internal: True #If Don't Want to See UART Receive Data, Set To True - on_value: - lambda: |- - if (id(LD1125H_UART_Text).state.substr(0,3) == "occ") { - id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str())); - if ((time(NULL)-id(LD1125H_Last_Mov_Time))>id(LD1125H_Mov_Time).state) { - id(LD1125H_Occupancy).publish_state("Occupancy"); - if (id(LD1125H_MovOcc_Binary).state == false) { - id(LD1125H_MovOcc_Binary).publish_state(true); - } - if (id(LD1125H_Mov_Binary).state == true) { - id(LD1125H_Mov_Binary).publish_state(false); - } - } - if (id(LD1125H_MovOcc_Binary).state == false) { - id(LD1125H_MovOcc_Binary).publish_state(true); - } - id(LD1125H_Last_Time) = time(NULL); - if (id(LD1125H_Clearence_Status) == true) { - id(LD1125H_Clearence_Status) = false; - } - } - else if (id(LD1125H_UART_Text).state.substr(0,3) == "mov") { - id(LD1125H_Distance).publish_state(atof(id(LD1125H_UART_Text).state.substr(9).c_str())); - id(LD1125H_Occupancy).publish_state("Movement"); - if (id(LD1125H_MovOcc_Binary).state == false) { - id(LD1125H_MovOcc_Binary).publish_state(true); - } - if (id(LD1125H_Mov_Binary).state == false) { - id(LD1125H_Mov_Binary).publish_state(true); - } - id(LD1125H_Last_Mov_Time) = time(NULL); - id(LD1125H_Last_Time) = time(NULL); - if (id(LD1125H_Clearence_Status) == true) { - id(LD1125H_Clearence_Status) = false; - } - } - - platform: template - name: ${upper_devicename} LD1125H Occupancy Status - id: LD1125H_Occupancy - icon: "mdi:motion-sensor" -binary_sensor: - - platform: status - name: ${upper_devicename} Status - - platform: template - name: ${upper_devicename} LD1125H Occupancy or Movement - id: LD1125H_MovOcc_Binary - device_class: occupancy - - platform: template - name: ${upper_devicename} LD1125H Movement - id: LD1125H_Mov_Binary - device_class: motion \ No newline at end of file