archive tidyups
This commit is contained in:
root
@@ -1,137 +0,0 @@
|
||||
#############################################
|
||||
# ESPHome
|
||||
#############################################
|
||||
esphome:
|
||||
name: bt-fridge-temps
|
||||
|
||||
#############################################
|
||||
# Specific board for ESPHome device
|
||||
#############################################
|
||||
esp32:
|
||||
board: nodemcu-32s
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
#############################################
|
||||
logger:
|
||||
|
||||
#############################################
|
||||
# Enable the Home Assistant API
|
||||
#############################################
|
||||
api:
|
||||
encryption:
|
||||
key: !secret bt-fridge-temps_api_key
|
||||
|
||||
#############################################
|
||||
# Enable Over the Air Update Capability
|
||||
# Safe mode will detect boot loops
|
||||
#############################################
|
||||
ota:
|
||||
safe_mode: true
|
||||
password: !secret bt-fridge-temps_ota_pass
|
||||
|
||||
#############################################
|
||||
# Use Wifi
|
||||
#############################################
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
# Details for fallback hotspot (captive portal)
|
||||
# in case wifi connection fails
|
||||
ap:
|
||||
ssid: "Bt-Fridge-Temps Fallback Hotspot"
|
||||
password: !secret fallback_ap_password
|
||||
|
||||
#############################################
|
||||
# Fallback captive portal
|
||||
#############################################
|
||||
captive_portal:
|
||||
|
||||
#############################################
|
||||
# Web Portal for display and monitoring
|
||||
#############################################
|
||||
web_server:
|
||||
port: 80
|
||||
auth:
|
||||
username: !secret web_server_username
|
||||
password: !secret web_server_password
|
||||
|
||||
#############################################
|
||||
# MQTT Monitoring
|
||||
#############################################
|
||||
mqtt:
|
||||
broker: !secret mqtt_server
|
||||
topic_prefix: esphome/bt-fridge-temps
|
||||
username: !secret mqtt_username
|
||||
password: !secret mqtt_password
|
||||
|
||||
|
||||
#############################################
|
||||
#############################################
|
||||
# MAIN SENSORS
|
||||
#############################################
|
||||
#############################################
|
||||
|
||||
|
||||
#############################################
|
||||
# Bluetooth
|
||||
#############################################
|
||||
bluetooth_proxy:
|
||||
|
||||
esp32_ble_tracker:
|
||||
|
||||
#xiaomi_ble:
|
||||
|
||||
###################################################################################
|
||||
## Help with Mi Bluetooth Temp Sensors
|
||||
## Youtube Howto https://www.youtube.com/watch?v=l5ea7lQWpMk&t=0s
|
||||
## https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html
|
||||
## https://esphome.io/components/sensor/xiaomi_ble.html?highlight=ble#lywsd03mmc
|
||||
## Tasmota Info: https://tasmota.github.io/docs/Bluetooth/
|
||||
###################################################################################
|
||||
|
||||
sensor:
|
||||
- platform: xiaomi_lywsd03mmc
|
||||
# ATC_DE944A
|
||||
mac_address: "A4:C1:38:DE:94:4A"
|
||||
#dummy bindkey
|
||||
bindkey: "eef418daf699a0c188f3bfd17e4565d5"
|
||||
temperature:
|
||||
name: "Fridge Temperature (BTT01)"
|
||||
humidity:
|
||||
name: "Fridge Humidity (BTT01)"
|
||||
battery_level:
|
||||
name: "Fridge Monitor Battery Level (BTT01)"
|
||||
- platform: xiaomi_lywsd03mmc
|
||||
# ATC_B32B0C
|
||||
mac_address: "A4:C1:38:B3:2B:0C"
|
||||
#dummy bindkey
|
||||
bindkey: "eef418daf699a0c188f3bfd17e4565d8"
|
||||
temperature:
|
||||
name: "Freezer Temperature (BTT02)"
|
||||
humidity:
|
||||
name: "Freezer Humidity (BTT02)"
|
||||
battery_level:
|
||||
name: "Freezer Monitor Battery Level (BTT02)"
|
||||
- platform: xiaomi_lywsd03mmc
|
||||
# ATC_D90603
|
||||
mac_address: "A4:C1:38:D9:06:03"
|
||||
#dummy bindkey
|
||||
bindkey: "eef418daf699a0c188f3bfd17e4565d7"
|
||||
temperature:
|
||||
name: "Lower Fridge Temperature (BTT03)"
|
||||
humidity:
|
||||
name: "Lower Fridge Humidity (BTT03)"
|
||||
battery_level:
|
||||
name: "Lower Fridge Battery Level (BTT03)"
|
||||
- platform: xiaomi_lywsd03mmc
|
||||
# ATC_81ECB0
|
||||
mac_address: "A4:C1:38:81:EC:B0"
|
||||
#dummy bindkey
|
||||
bindkey: "eef418daf699a0c188f3bfd17e4565d6"
|
||||
temperature:
|
||||
name: "Lower Freezer Temperature (BTT04)"
|
||||
humidity:
|
||||
name: "Lower Freezer Humidity (BTT04)"
|
||||
battery_level:
|
||||
name: "Lower Freezer Monitor Battery Level (BTT04)"
|
||||
@@ -1,130 +0,0 @@
|
||||
# key: RhIxVv/Zu8IbuULq1upidP8Z1HxFDmVNx8kUvfPSRNs=
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DATA CUPBOARD POWER MONITOR - RIGHT
|
||||
#
|
||||
# Controlled by a Athom Smart Plug V2 No Relay
|
||||
# https://github.com/athom-tech/athom-configs/blob/main/athom-without-relay-plug.yaml
|
||||
#
|
||||
# V1.0 2025-08-28 First Setup
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-datacupboard-right"
|
||||
friendly_name: "Data Cupboard Power Monitor - Right"
|
||||
description_comment: "Data Cupboard Right :: Athom Smart Plug Power V2 (No relay)"
|
||||
device_area: "Data Cupboard"
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V2 NR"
|
||||
project_version: "v1.0"
|
||||
|
||||
# Passwords (unfortunately you cannot use substitutions inside secrets names)
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-datacupboard-right_ip
|
||||
#static_ip_address: "172.31.10.95"
|
||||
|
||||
# Device General Settings
|
||||
log_level: "NONE" # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for general sensors etc
|
||||
|
||||
# Device Specific Settings (Athom Power Monitor Plug V2)
|
||||
sensor_update_interval: "10s"
|
||||
hide_energy_sensor: "true" # boolean (used by "internal:")
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
|
||||
# Network and Wi-Fi
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
|
||||
# Native API
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#local_api_key: RhIxVv/Zu8IbuULq1upidP8Z1HxFDmVNx8kUvfPSRNs=
|
||||
|
||||
# # Web Portal
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
|
||||
# MQTT
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
# Time/SNTP
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
# Athom Power Monitor Plug V2 (No Relay)
|
||||
common_athompowermonV2: !include
|
||||
file: common/athompowermonv2norelay_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
sensor_update_interval: "${sensor_update_interval}"
|
||||
hide_energy_sensor: "${hide_energy_sensor}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}"
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: false
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp8266.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true
|
||||
early_pin_init: true
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}"
|
||||
baud_rate: 0 # free UART for CSE7766
|
||||
|
||||
@@ -1,126 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DATA CUPBOARD POWER MONITOR - LEFT
|
||||
#
|
||||
# Controlled by a Athom Smart Plug V2 No Relay
|
||||
# https://github.com/athom-tech/athom-configs/blob/main/athom-without-relay-plug.yaml
|
||||
#
|
||||
# V1.0 2025-08-28 First Setup
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-datacupboard-left"
|
||||
friendly_name: "Data Cupboard Power Monitor - Left"
|
||||
description_comment: "Data Cupboard Left :: Athom Smart Plug Power V2 No relay"
|
||||
device_area: "Data Cupboard"
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V2 NR"
|
||||
project_version: "v1.0"
|
||||
|
||||
# Passwords (unfortunately you cannot use substitutions inside secrets names)
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-datacupboard-left_ip
|
||||
|
||||
# Device General Settings
|
||||
log_level: "NONE" # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for general sensors etc
|
||||
|
||||
# Device Specific Settings (Athom Power Monitor Plug V2)
|
||||
sensor_update_interval: "10s"
|
||||
hide_energy_sensor: "true" # boolean (used by "internal:")
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
|
||||
# Network and Wi-Fi
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
|
||||
# Native API
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
|
||||
# # Web Portal
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
|
||||
# MQTT
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
# Time/SNTP
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
# Athom Power Monitor Plug V2 (No Relay)
|
||||
common_athompowermonV2: !include
|
||||
file: common/athompowermonv2norelay_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
sensor_update_interval: "${sensor_update_interval}"
|
||||
hide_energy_sensor: "${hide_energy_sensor}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}"
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: false
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp8266.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true
|
||||
early_pin_init: true
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}"
|
||||
baud_rate: 0 # free UART for CSE7766
|
||||
@@ -1,131 +0,0 @@
|
||||
# key: EW43Gye1M+RLJkFHn1fN97pWImdurb78eD/FfIQh9nU=
|
||||
# key: RhIxVv/Zu8IbuULq1upidP8Z1HxFDmVNx8kUvfPSRNs=
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DATA CUPBOARD POWER MONITOR - RIGHT
|
||||
#
|
||||
# Controlled by a Athom Smart Plug V2 No Relay
|
||||
# https://github.com/athom-tech/athom-configs/blob/main/athom-without-relay-plug.yaml
|
||||
#
|
||||
# V1.0 2025-08-28 First Setup
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-datacupboard-right"
|
||||
friendly_name: "Data Cupboard Power Monitor - Right"
|
||||
description_comment: "Data Cupboard Right :: Athom Smart Plug Power V2 (No relay)"
|
||||
device_area: "Data Cupboard"
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V2 NR"
|
||||
project_version: "v1.0"
|
||||
|
||||
# Passwords (unfortunately you cannot use substitutions inside secrets names)
|
||||
api_key: !secret esp-api_key
|
||||
ota_pass: !secret esp-ota_pass
|
||||
static_ip_address: !secret esp-datacupboard-right_ip
|
||||
#static_ip_address: "172.31.10.95"
|
||||
|
||||
# Device General Settings
|
||||
log_level: "NONE" # NONE, ERROR, WARN, INFO, DEBUG, VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for general sensors etc
|
||||
|
||||
# Device Specific Settings (Athom Power Monitor Plug V2)
|
||||
sensor_update_interval: "10s"
|
||||
hide_energy_sensor: "true" # boolean (used by "internal:")
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
|
||||
# Network and Wi-Fi
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
|
||||
# Native API
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
#local_api_key: "${api_key}"
|
||||
local_api_key: "EW43Gye1M+RLJkFHn1fN97pWImdurb78eD/FfIQh9nU="
|
||||
|
||||
# # Web Portal
|
||||
# common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
|
||||
# MQTT
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
# Time/SNTP
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
# Athom Power Monitor Plug V2 (No Relay)
|
||||
common_athompowermonV2: !include
|
||||
file: common/athompowermonv2norelay_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
sensor_update_interval: "${sensor_update_interval}"
|
||||
hide_energy_sensor: "${hide_energy_sensor}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}"
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: false
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp8266.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true
|
||||
early_pin_init: true
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}"
|
||||
baud_rate: 0 # free UART for CSE7766
|
||||
|
||||
@@ -1,150 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# DOWNSTAIRS DISHWASHER POWER MONITOR
|
||||
#
|
||||
# Controlled by a Athom Smart Plug V1
|
||||
# package_import_url: github://athom-tech/athom-configs/athom-smart-plug.yaml
|
||||
#
|
||||
# V1.2 2025-06-15 Changed to Athom V1
|
||||
# V1.1 2025-06-12 Tidyups and packages added
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-downstdishwpower"
|
||||
friendly_name: "Downstairs Dishwasher Power"
|
||||
description_comment: "Downstairs Dishwasher Power :: Athom Smart Plug Power V1"
|
||||
device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V1" # Project Details
|
||||
project_version: "v1.2" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-downstdishwpower_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:power-socket-au"
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" #Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: False
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 10min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
filters:
|
||||
- delayed_on: 20ms
|
||||
on_click:
|
||||
- switch.toggle: relay
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
#################################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#################################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Power Output"
|
||||
pin: GPIO14
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_ON # Ensures the relay is restored (or off) at boot
|
||||
#internal: true # Hides the switch from Home Assistant
|
||||
icon: "${relay_icon}"
|
||||
|
||||
@@ -1,170 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# MAIN DISHWASHER POWER
|
||||
# Controlled by a Athom Smart Plug V1
|
||||
# package_import_url: github://athom-tech/athom-configs/athom-smart-plug.yaml
|
||||
#
|
||||
# V1.1 2025-06-12 package added for energy entities
|
||||
# V1.0 2025-06-10 YAML Tidyups
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-maindishwasherspower"
|
||||
friendly_name: "Main Dishwashers Power"
|
||||
description_comment: "Main Dishwashers Power Monitor :: Athom Smart Plug Power Monitor V1"
|
||||
device_area: "Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V1" # Project Details
|
||||
project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-maindishwasherspower_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:dishwasher"
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: False
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
on_boot:
|
||||
priority: 200
|
||||
then:
|
||||
- switch.turn_on: "relay"
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: True # mainly for calculating cumulative energy, but not that important here
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
#dashboard_import:
|
||||
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome LOGGING
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO13
|
||||
inverted: True
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: 3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
filters:
|
||||
- delayed_on: 20ms
|
||||
on_click:
|
||||
- min_length: 20ms
|
||||
max_length: 500ms
|
||||
then:
|
||||
- switch.toggle:
|
||||
id: relay
|
||||
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
#################################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#################################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Power Output"
|
||||
pin: GPIO14
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_ON # Ensures the relay is restored (or off) at boot
|
||||
#internal: true # Hides the switch from Home Assistant
|
||||
icon: "${relay_icon}"
|
||||
|
||||
@@ -1,188 +0,0 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# OFFICE MULTI USB CONTROL
|
||||
# Controlled by a Sonoff Basic R1
|
||||
#
|
||||
# V1.0 2025-06-18 Initial Version
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-officemultiusb"
|
||||
friendly_name: "Office Multi USB Control"
|
||||
mqtt_device_name: "office-multiusb-control"
|
||||
description_comment: "Multi USB control in the Office (behind monitors) :: Sonoff Basic"
|
||||
device_area: "Office" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.Sonoff Basic V1" # Project Details
|
||||
project_version: "v1.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-officemultiusb_ip
|
||||
mqtt_main_command_topic: !secret mqtt_main_command_topic
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:generator-portable"
|
||||
log_level: "ERROR" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
|
||||
# MQTT Controls
|
||||
mqtt_main_topic: "${mqtt_main_command_topic}/${mqtt_device_name}/operation" # Topic we will use to command stuff from external withougt HA
|
||||
#mqtt_status_topic: "${mqtt_main_status_topic}/esphome/${device_name}" # Topic we will use to read stuff from external withougt HA
|
||||
#mqtt_main_status_topic: !secret mqtt_main_status_topic
|
||||
#mqtt_remote_device1_command_topic: "${mqtt_main_command_topic}/masterbath-towelrail/operation"
|
||||
#mqtt_remote_device1_command1: "BOOST"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
# platformio_options:
|
||||
# build_flags:
|
||||
# - "-Os" # optimize for size
|
||||
# - "-Wl,--gc-sections" # drop unused code/data
|
||||
# - "-fno-exceptions" # strip C++ exceptions
|
||||
# - "-fno-rtti" # strip C++ RTTI
|
||||
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp01_1m # The original sonoff basic
|
||||
restore_from_flash: True # restore some values on reboot
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
mdns:
|
||||
disabled: False
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
# Sonoff Basic R1 Relay Switch is GPIO12
|
||||
#############################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "ELV Power Supply"
|
||||
pin: GPIO12
|
||||
id: relay1
|
||||
restore_mode: RESTORE_DEFAULT_ON
|
||||
icon: "${relay_icon}"
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
# Sonoff Basic R1 Button is GPIO03
|
||||
#############################################
|
||||
binary_sensor:
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO03
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
filters:
|
||||
- delayed_on: 20ms
|
||||
on_click:
|
||||
- min_length: 20ms
|
||||
max_length: 500ms
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(relay1).state) {
|
||||
// Relay is ON: turn it OFF
|
||||
id(relay1).turn_off();
|
||||
} else {
|
||||
// Relay is OFF: turn it ON
|
||||
id(relay1).turn_on();
|
||||
}
|
||||
|
||||
# Mimics actual relay status (but not controllable)
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay1).state;
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
# Sonoff Basic R1 LED is GPIO13
|
||||
#############################################
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO13
|
||||
inverted: yes
|
||||
|
||||
##########################################################################################
|
||||
# MQTT COMMANDS
|
||||
# This adds device-specific MQTT command triggers to the common MQTT configuration.
|
||||
##########################################################################################
|
||||
mqtt:
|
||||
on_message:
|
||||
# Relay 1 control
|
||||
- topic: "${mqtt_main_topic}/relay1/set"
|
||||
payload: "ON"
|
||||
then:
|
||||
- switch.turn_on: relay1
|
||||
- topic: "${mqtt_main_topic}/relay1/set"
|
||||
payload: "OFF"
|
||||
then:
|
||||
- switch.turn_off: relay1
|
||||
|
||||
@@ -1,705 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# POOL LIGHT POWER AND TIMER
|
||||
# Controlled by a Athom Smart Plug V1
|
||||
#
|
||||
# dashboard_import:
|
||||
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
#
|
||||
# V2.4 2025-06-15 Changed back to an Athom V1 (esp8266)
|
||||
# V2.3 2025-06-15 Changed to an Athom V3 (esp32)
|
||||
# V2.2 2025-06-14 Fixes to offline time when sntp/network unavailable
|
||||
# V2.1 2025-06-12 Added select and button to chose modes, added countdown & startup to boost
|
||||
# V2.0 2025-06-05 YAML Tidyups
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# - It allows the device to work in a standalone timer style operation
|
||||
# - The timer has a morning and evening time (but no weekday/weekend settings)
|
||||
# - Default values are set, but changed values are remembered in flash
|
||||
# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
|
||||
# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
|
||||
# - If on a network and there is a MQTT server, you can set the on/off times via MQTT (See below commands)
|
||||
# - You can set 4 modes ON/OFF/TIMER/BOOST via MQTT. Setting BOOST gives you a oneshot operation
|
||||
# - Any new timer times set via MQTT will be remembered though a reboot
|
||||
# - On startup, or a reboot, the device will always turn on for the BOOST Duration (BOOST mode, default 2 hours)
|
||||
# - TIMER mode will always be switched on after BOOST mode is complete
|
||||
# - Home Assistant entities are set so that BOOST mode can be pressed with a button and other modes selectable with a dropdown
|
||||
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 30 seconds (with ~2 secs in between to allow it to boot)
|
||||
#
|
||||
# MQTT Commands
|
||||
# Values will be set in place on the update_interval time, not immediately
|
||||
# Use 00:00 in 24hr format for time setting. (Note there is no weekday/weekend setting)
|
||||
# mqtt_timer_topic/morning-on/06:00 : Time device will go on
|
||||
# mqtt_timer_topic/morning-off/08:00 : Time device will go off
|
||||
# mqtt_timer_topic/evening-on/09:00 : Time device will go on
|
||||
# mqtt_timer_topic/evening-off/00:00 : Time device will go off
|
||||
# mqtt_timer_topic/boost-time/0000 : Time in minutes device will temporarily go on for (1-1439)
|
||||
# mqtt_timer_topic/operation/ON : Device permanently on
|
||||
# mqtt_timer_topic/operation/OFF : Device permanently off
|
||||
# mqtt_timer_topic/operation/TIMER : Device will obey timer settings
|
||||
# mqtt_timer_topic/operation/BOOST : Turn on for (boost_duration) minutes then BOOST (also on startup)
|
||||
#
|
||||
# operation_mode:
|
||||
# 0 = OFF
|
||||
# 1 = ON
|
||||
# 2 = TIMER
|
||||
# 3 = BOOST
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-poollightpower"
|
||||
friendly_name: "Pool Light Power"
|
||||
description_comment: "Pool Light Power :: Athom Smart Plug Power V1"
|
||||
device_area: "Outside" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V1" # Project Details
|
||||
project_version: "v2.4" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-poollightpower_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "NONE" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "10s" # update time for for general sensors etc
|
||||
|
||||
# Device Settings
|
||||
relay_icon: "mdi:power-socket-au"
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
mqtt_timer_topic: "viewroad-commands/poollight-timer" # Topics you will use to change stuff
|
||||
boost_duration_default: "180" # Minutes to stay ON in BOOST mode before reverting to TIMER
|
||||
morning_on_default: "450" # Default in minutes from midnight. Default 07:30 => 450
|
||||
morning_off_default: "450" # Default in minutes from midnight. Default 07:30 => 450 (same as ON as no need for morning schedule)
|
||||
evening_on_default: "1140" # Default in minutes from midnight. Default 19:00 => 1140
|
||||
evening_off_default: "1350" # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
#common_webportal: !include
|
||||
# file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV1: !include
|
||||
file: common/athompowermonv1_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" #Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: False
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
#platformio_options:
|
||||
# build_unflags:
|
||||
# - -std=gnu++20
|
||||
# - -std=gnu++2a
|
||||
# build_flags:
|
||||
# - -std=gnu++11
|
||||
# - -Os
|
||||
# - -Wl,--gc-sections
|
||||
# - -fno-exceptions
|
||||
# - -fno-rtti
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp8266:
|
||||
board: esp8285
|
||||
restore_from_flash: true # mainly for calculating cumulative energy, but not that important here
|
||||
#framework:
|
||||
# version: 2.7.4
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 10min
|
||||
|
||||
mdns:
|
||||
disabled: True # binary size saving
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
##########################################################################################
|
||||
globals:
|
||||
|
||||
# Tracks the time (in seconds from midnight) at the previous boot
|
||||
- id: last_boot_time_s
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Counts how many consecutive boots have occurred (within X seconds)
|
||||
- id: boot_count
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
# operation_mode:
|
||||
# 0 = OFF
|
||||
# 1 = ON
|
||||
# 2 = TIMER
|
||||
# 3 = BOOST
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
####################################################
|
||||
- id: current_mins
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "720" # 720 is 12:00 Noon
|
||||
|
||||
####################################################
|
||||
# boost_timer: counts minutes in BOOST mode
|
||||
# After 'boost_duration' minutes, revert to TIMER.
|
||||
####################################################
|
||||
- id: boost_timer
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
##########################################################################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
##########################################################################################
|
||||
text_sensor:
|
||||
|
||||
############################
|
||||
# MQTT Subscriptions
|
||||
############################
|
||||
####################################################
|
||||
# Subscribe to the Morning On time, format "HH:MM"
|
||||
# We check x.size() == 5 and x[2] == ':',
|
||||
# then parse x.substr(0,2) and x.substr(3,2)
|
||||
# std::string uses 'substr', not 'substring'.
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning On Time Setting"
|
||||
id: morning_on_topic
|
||||
topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
|
||||
internal: True
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
// Expect "HH:MM" => total length = 5, with ':'
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str()); // "HH"
|
||||
int minute = atoi(x.substr(3, 2).c_str()); // "MM"
|
||||
id(morning_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Morning Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning Off Time Setting"
|
||||
id: morning_off_topic
|
||||
topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(morning_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening On time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening On Time Setting"
|
||||
id: evening_on_topic
|
||||
topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening Off Time Setting"
|
||||
id: evening_off_topic
|
||||
topic: "${mqtt_timer_topic}/evening-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Boost duration => 1 - 1439
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Boost Duration"
|
||||
id: boost_time_topic
|
||||
topic: "${mqtt_timer_topic}/boost-time" # Stored as an integer from 1-1439
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
// parse as integer
|
||||
char *endptr;
|
||||
long v = strtol(x.c_str(), &endptr, 10);
|
||||
|
||||
// invalid if nothing parsed, trailing chars, or out of 0–1439
|
||||
if (endptr == x.c_str() || *endptr != '\0' || v < 0 || v > 1439) {
|
||||
ESP_LOGE("boost_time", "Invalid boost_time '%s'", x.c_str());
|
||||
} else {
|
||||
id(boost_duration) = static_cast<int>(v);
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Subscribe to operation mode:
|
||||
# OFF, ON, TIMER, BOOST
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
# MQTT subscription: set mode, then immediately re-evaluate relay
|
||||
- platform: mqtt_subscribe
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation"
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
} else if (strcasecmp(x.c_str(), "ON") == 0) {
|
||||
id(operation_mode) = 1;
|
||||
ESP_LOGI("timer","Operation mode set to ON");
|
||||
} else if (strcasecmp(x.c_str(), "OFF") == 0) {
|
||||
id(operation_mode) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "BOOST") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to BOOST");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, BOOST)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Operation Mode State"
|
||||
lambda: |-
|
||||
// 0=OFF, 1=ON, 2=TIMER, 3=BOOST
|
||||
switch (id(operation_mode)) {
|
||||
case 0: return {"OFF"};
|
||||
case 1: return {"ON"};
|
||||
case 2: return {"TIMER"};
|
||||
case 3: return {"BOOST"};
|
||||
default: return {"UNKNOWN"};
|
||||
}
|
||||
update_interval: 5s
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning On Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_on) / 60;
|
||||
int minute = id(morning_on) % 60;
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning Off Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_off) / 60;
|
||||
int minute = id(morning_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening On Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_on) / 60;
|
||||
int minute = id(evening_on) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening Off Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_off) / 60;
|
||||
int minute = id(evening_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO03
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
filters:
|
||||
- delayed_on: 20ms
|
||||
on_click:
|
||||
- min_length: 20ms
|
||||
max_length: 500ms
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(relay).state) {
|
||||
// Relay is ON: turn it OFF and set mode to 0 (TIMER)
|
||||
id(relay).turn_off();
|
||||
id(operation_mode) = 2;
|
||||
} else {
|
||||
// Relay is OFF: turn it ON and set mode to 3 (BOOST)
|
||||
id(relay).turn_on();
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
##########################################################################################
|
||||
# Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
##########################################################################################
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Timeclock: Boost Duration"
|
||||
id: boost_duration_time
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
update_interval: "${update_interval}"
|
||||
lambda: |-
|
||||
return id(boost_duration);
|
||||
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
id: mins_from_midnight
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
update_interval: "${update_interval}"
|
||||
internal: True # No need to show this in Home Assistant
|
||||
lambda: |-
|
||||
return id(current_mins);
|
||||
|
||||
# A value in mins if a timer is running showing how many mins left
|
||||
- platform: template
|
||||
name: "Timer Minutes Remaining"
|
||||
id: timer_minutes_remaining
|
||||
unit_of_measurement: "Mins"
|
||||
update_interval: 5s
|
||||
accuracy_decimals: "0"
|
||||
lambda: |-
|
||||
// always zero if relay is off
|
||||
if (!id(relay).state) {
|
||||
return 0;
|
||||
}
|
||||
int rem = 0;
|
||||
// only calculate for mode 2 (scheduled) or mode 3 (BOOST)
|
||||
if (id(operation_mode) == 2) {
|
||||
int a = id(morning_off) - id(current_mins);
|
||||
int b = id(evening_off) - id(current_mins);
|
||||
// if a is negative, use b; otherwise pick the smaller of a or b
|
||||
rem = (a < 0) ? b : (a < b ? a : b);
|
||||
}
|
||||
else if (id(operation_mode) == 3) {
|
||||
rem = id(boost_duration) - id(boost_timer);
|
||||
}
|
||||
// never return negative
|
||||
return rem > 0 ? rem : 0;
|
||||
|
||||
|
||||
#################################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#################################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Power Output"
|
||||
pin: GPIO14
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF # Ensures the relay is restored (or off) at boot
|
||||
#internal: true # Hides the switch from Home Assistant
|
||||
icon: "${relay_icon}"
|
||||
|
||||
#################################################################################################
|
||||
# BUTTON COMPONENT
|
||||
# https://esphome.io/components/button/index.html
|
||||
#################################################################################################
|
||||
button:
|
||||
- platform: template
|
||||
name: "Boost now"
|
||||
id: boost_button
|
||||
icon: "mdi:play-circle-outline"
|
||||
on_press:
|
||||
# 1) reset BOOST timer and set mode
|
||||
- lambda: |-
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
- platform: template
|
||||
name: "Default timer settings"
|
||||
id: default_timer_settings_button
|
||||
icon: "mdi:restore"
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// Restore all timing globals to their YAML defaults
|
||||
id(morning_on) = ${morning_on_default};
|
||||
id(morning_off) = ${morning_off_default};
|
||||
id(evening_on) = ${evening_on_default};
|
||||
id(evening_off) = ${evening_off_default};
|
||||
id(boost_duration)= ${boost_duration_default};
|
||||
// Reset mode to TIMER and clear any running boost
|
||||
id(operation_mode)= 2;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Default timer settings applied");
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
# https://esphome.io/components/select/index.html
|
||||
#################################################################################################
|
||||
select:
|
||||
- platform: template
|
||||
name: "Operation Mode"
|
||||
id: operation_mode_select
|
||||
update_interval: 5s
|
||||
options:
|
||||
- "OFF"
|
||||
- "ON"
|
||||
- "TIMER"
|
||||
- "BOOST"
|
||||
|
||||
# show the current mode
|
||||
lambda: |-
|
||||
switch (id(operation_mode)) {
|
||||
case 1: return std::string("ON");
|
||||
case 2: return std::string("TIMER");
|
||||
case 3: return std::string("BOOST");
|
||||
default: return std::string("OFF");
|
||||
}
|
||||
|
||||
# when changed in HA, set mode & re-evaluate
|
||||
set_action:
|
||||
- lambda: |-
|
||||
if (x == "OFF") { id(operation_mode) = 0; }
|
||||
else if (x == "ON") { id(operation_mode) = 1; }
|
||||
else if (x == "TIMER") { id(operation_mode) = 2; }
|
||||
else { // BOOST
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SCRIPT COMPONENT
|
||||
# https://esphome.io/components/script.html
|
||||
#################################################################################################
|
||||
# Script: evaluate and drive the relay
|
||||
script:
|
||||
- id: evaluate_relay_state
|
||||
then:
|
||||
- lambda: |-
|
||||
int mode = id(operation_mode);
|
||||
|
||||
// BOOST just forces the relay on
|
||||
if (mode == 3) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// OFF → always off
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
// ON → always on
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// TIMER → follow schedule windows
|
||||
{
|
||||
bool should_on = false;
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
|
||||
should_on = true;
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
|
||||
should_on = true;
|
||||
if (should_on) id(relay).turn_on();
|
||||
else id(relay).turn_off();
|
||||
}
|
||||
|
||||
#################################################################################################
|
||||
# INTERVAL COMPONENT
|
||||
# https://esphome.io/components/interval.html
|
||||
#################################################################################################
|
||||
# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
|
||||
interval:
|
||||
- interval: "1min"
|
||||
then:
|
||||
- lambda: |-
|
||||
// — update current_mins via SNTP or fallback
|
||||
if (!id(sntp_time).now().is_valid()) {
|
||||
id(current_mins)++;
|
||||
if (id(current_mins) >= 1440) id(current_mins) = 0;
|
||||
} else {
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// — if in BOOST, advance boost_timer and expire when done
|
||||
if (id(operation_mode) == 3) {
|
||||
id(boost_timer)++;
|
||||
if (id(boost_timer) >= id(boost_duration)) {
|
||||
id(operation_mode) = 2;
|
||||
//id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
@@ -1,702 +0,0 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# POOL LIGHTS POWER AND TIMER
|
||||
# Controlled by a Athom Smart Plug V3
|
||||
#
|
||||
# dashboard_import:
|
||||
# package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
|
||||
#
|
||||
# V2.3 2025-06-15 Changed to an Athom V3 (esp32)
|
||||
# V2.2 2025-06-14 Fixes to offline time when sntp/network unavailable
|
||||
# V2.1 2025-06-12 Added select and button to chose modes, added countdown & startup to boost
|
||||
# V2.0 2025-06-05 YAML Tidyups
|
||||
#
|
||||
# INSTRUCTIONS
|
||||
# - It allows the device to work in a standalone timer style operation
|
||||
# - The timer has a morning and evening time (but no weekday/weekend settings)
|
||||
# - Default values are set, but changed values are remembered in flash
|
||||
# - It uses SNTP for time setting (but obviously only if wifi & networking are working)
|
||||
# - It will default to an internal timer if no wifi. To reset internal timer, reboot the device at 12pm (noon)
|
||||
# - If on a network and there is a MQTT server, you can set the on/off times via MQTT (See below commands)
|
||||
# - You can set 4 modes ON/OFF/TIMER/BOOST via MQTT. Setting BOOST gives you a oneshot operation
|
||||
# - Any new timer times set via MQTT will be remembered though a reboot
|
||||
# - On startup, or a reboot, the device will always turn on for the BOOST Duration (BOOST mode, default 2 hours)
|
||||
# - TIMER mode will always be switched on after BOOST mode is complete
|
||||
# - Home Assistant entities are set so that BOOST mode can be pressed with a button and other modes selectable with a dropdown
|
||||
# - If you need it ON continuously with no MQTT, toggle power ON/OFF 4 times within 30 seconds (with ~2 secs in between to allow it to boot)
|
||||
#
|
||||
# MQTT Commands
|
||||
# Values will be set in place on the update_interval time, not immediately
|
||||
# Use 00:00 in 24hr format for time setting. (Note there is no weekday/weekend setting)
|
||||
# mqtt_timer_topic/morning-on/06:00 : Time device will go on
|
||||
# mqtt_timer_topic/morning-off/08:00 : Time device will go off
|
||||
# mqtt_timer_topic/evening-on/09:00 : Time device will go on
|
||||
# mqtt_timer_topic/evening-off/00:00 : Time device will go off
|
||||
# mqtt_timer_topic/boost-time/0000 : Time in minutes device will temporarily go on for (1-1439)
|
||||
# mqtt_timer_topic/operation/ON : Device permanently on
|
||||
# mqtt_timer_topic/operation/OFF : Device permanently off
|
||||
# mqtt_timer_topic/operation/TIMER : Device will obey timer settings
|
||||
# mqtt_timer_topic/operation/BOOST : Turn on for (boost_duration) minutes then BOOST (also on startup)
|
||||
#
|
||||
# operation_mode:
|
||||
# 0 = OFF
|
||||
# 1 = ON
|
||||
# 2 = TIMER
|
||||
# 3 = BOOST
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-poollightspower"
|
||||
friendly_name: "Pool Lights Power"
|
||||
description_comment: "Pool Lights Power :: Athom Smart Plug Power V3"
|
||||
device_area: "Outside" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Athom Technology.Smart Plug V3" # Project Details
|
||||
project_version: "v2.3" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-poollightspower_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-poollightspower_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-poollightspower_ip
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "10s" # update time for for general sensors etc
|
||||
|
||||
# Device and Timer Settings
|
||||
relay_icon: "mdi:light-flood-up"
|
||||
current_limit : "10" # Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
mqtt_timer_topic: "viewroad-commands/poollights-timer" # Topics you will use to change stuff
|
||||
boost_duration_default: "180" # Minutes to stay ON in BOOST mode before reverting to TIMER
|
||||
morning_on_default: "450" # Default in minutes from midnight. Default 07:30 => 450
|
||||
morning_off_default: "450" # Default in minutes from midnight. Default 07:30 => 450 (same as ON as no need for morning schedule)
|
||||
evening_on_default: "1140" # Default in minutes from midnight. Default 19:00 => 1140
|
||||
evening_off_default: "1350" # Default in minutes from midnight. Default 22:30 => 1350 => 1440 is midnight
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
packages:
|
||||
common_wifi: !include
|
||||
file: common/network_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
common_webportal: !include
|
||||
file: common/webportal_common.yaml
|
||||
common_mqtt: !include
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
common_sntp: !include
|
||||
file: common/sntp_common.yaml
|
||||
common_general_sensors: !include
|
||||
file: common/sensors_common.yaml
|
||||
vars:
|
||||
local_friendly_name: "${friendly_name}"
|
||||
local_update_interval: "${update_interval}"
|
||||
|
||||
# Device Specific included packages
|
||||
common_athompowermonV3: !include
|
||||
file: common/athompowermonv3_common.yaml
|
||||
vars:
|
||||
local_current_limit: "${current_limit}"
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" #Appears on the esphome page in HA
|
||||
area: "${device_area}"
|
||||
name_add_mac_suffix: False
|
||||
min_version: 2024.6.0
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c3
|
||||
board_build.variant: esp32c3
|
||||
board_build.flash_mode: dio
|
||||
on_boot:
|
||||
then:
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
##########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
##########################################################################################
|
||||
esp32:
|
||||
board: esp32-c3-devkitm-1
|
||||
flash_size: 4MB
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: esp-idf # "esp-idf" OR "arduino". Suggested ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang.
|
||||
version: recommended # recommended, latest or dev
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
##########################################################################################
|
||||
# Global Variables for use in automations etc
|
||||
# https://esphome.io/guides/automations.html?highlight=globals#global-variables
|
||||
##########################################################################################
|
||||
globals:
|
||||
|
||||
# Tracks the time (in seconds from midnight) at the previous boot
|
||||
- id: last_boot_time_s
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Counts how many consecutive boots have occurred (within X seconds)
|
||||
- id: boot_count
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
# Morning On time (minutes from midnight),
|
||||
- id: morning_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_on_default}"
|
||||
|
||||
# Morning Off time (minutes from midnight),
|
||||
- id: morning_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${morning_off_default}"
|
||||
|
||||
# Evening On time (minutes from midnight),
|
||||
- id: evening_on
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${evening_on_default}"
|
||||
|
||||
# Evening Off time (minutes from midnight),
|
||||
- id: evening_off
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${evening_off_default}"
|
||||
|
||||
# Boost Duration (minutes),
|
||||
- id: boost_duration
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "${boost_duration_default}"
|
||||
|
||||
####################################################
|
||||
# operation_mode:
|
||||
# 0 = OFF
|
||||
# 1 = ON
|
||||
# 2 = TIMER
|
||||
# 3 = BOOST
|
||||
####################################################
|
||||
- id: operation_mode
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "2"
|
||||
|
||||
####################################################
|
||||
# current_mins is set if SNTP is invalid.
|
||||
# We assume user powers on the device at 12:00 noon
|
||||
# => 12 * 60 = 720 minutes from midnight.
|
||||
####################################################
|
||||
- id: current_mins
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "720" # 720 is 12:00 Noon
|
||||
|
||||
####################################################
|
||||
# boost_timer: counts minutes in BOOST mode
|
||||
# After 'boost_duration' minutes, revert to TIMER.
|
||||
####################################################
|
||||
- id: boost_timer
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
|
||||
##########################################################################################
|
||||
# Text Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
##########################################################################################
|
||||
text_sensor:
|
||||
|
||||
############################
|
||||
# MQTT Subscriptions
|
||||
############################
|
||||
####################################################
|
||||
# Subscribe to the Morning On time, format "HH:MM"
|
||||
# We check x.size() == 5 and x[2] == ':',
|
||||
# then parse x.substr(0,2) and x.substr(3,2)
|
||||
# std::string uses 'substr', not 'substring'.
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning On Time Setting"
|
||||
id: morning_on_topic
|
||||
topic: "${mqtt_timer_topic}/morning-on" # Stored in the format HH:MM
|
||||
internal: True
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
// Expect "HH:MM" => total length = 5, with ':'
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str()); // "HH"
|
||||
int minute = atoi(x.substr(3, 2).c_str()); // "MM"
|
||||
id(morning_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Morning Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Morning Off Time Setting"
|
||||
id: morning_off_topic
|
||||
topic: "${mqtt_timer_topic}/morning-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(morning_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Morning Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Morning Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening On time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening On Time Setting"
|
||||
id: evening_on_topic
|
||||
topic: "${mqtt_timer_topic}/evening-on" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_on) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening On: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening On format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Evening Off time => "HH:MM"
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Evening Off Time Setting"
|
||||
id: evening_off_topic
|
||||
topic: "${mqtt_timer_topic}/evening-off" # Stored in the format HH:MM
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (x.size() == 5 && x[2] == ':') {
|
||||
int hour = atoi(x.substr(0, 2).c_str());
|
||||
int minute = atoi(x.substr(3, 2).c_str());
|
||||
id(evening_off) = hour * 60 + minute;
|
||||
ESP_LOGI("timer","Received new Evening Off: %02d:%02d", hour, minute);
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid Evening Off format: %s", x.c_str());
|
||||
}
|
||||
####################################################
|
||||
# Boost duration => 1 - 1439
|
||||
####################################################
|
||||
- platform: mqtt_subscribe
|
||||
name: "Boost Duration"
|
||||
id: boost_time_topic
|
||||
topic: "${mqtt_timer_topic}/boost-time" # Stored as an integer from 1-1439
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
// parse as integer
|
||||
char *endptr;
|
||||
long v = strtol(x.c_str(), &endptr, 10);
|
||||
|
||||
// invalid if nothing parsed, trailing chars, or out of 0–1439
|
||||
if (endptr == x.c_str() || *endptr != '\0' || v < 0 || v > 1439) {
|
||||
ESP_LOGE("boost_time", "Invalid boost_time '%s'", x.c_str());
|
||||
} else {
|
||||
id(boost_duration) = static_cast<int>(v);
|
||||
}
|
||||
|
||||
####################################################
|
||||
# Subscribe to operation mode:
|
||||
# OFF, ON, TIMER, BOOST
|
||||
# We do case-insensitive compare using strcasecmp
|
||||
# (Requires <strings.h> typically included in ESPHome)
|
||||
####################################################
|
||||
# MQTT subscription: set mode, then immediately re-evaluate relay
|
||||
- platform: mqtt_subscribe
|
||||
id: timer_operation_mode_topic
|
||||
topic: "${mqtt_timer_topic}/operation"
|
||||
internal: True # No need to show this in Home Assistant as there is a sensor that shows the set value
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
if (strcasecmp(x.c_str(), "TIMER") == 0) {
|
||||
id(operation_mode) = 2;
|
||||
ESP_LOGI("timer","Operation mode set to TIMER");
|
||||
} else if (strcasecmp(x.c_str(), "ON") == 0) {
|
||||
id(operation_mode) = 1;
|
||||
ESP_LOGI("timer","Operation mode set to ON");
|
||||
} else if (strcasecmp(x.c_str(), "OFF") == 0) {
|
||||
id(operation_mode) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to OFF");
|
||||
} else if (strcasecmp(x.c_str(), "BOOST") == 0) {
|
||||
id(operation_mode) = 3;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Operation mode set to BOOST");
|
||||
} else {
|
||||
ESP_LOGW("timer","Invalid operation mode: %s", x.c_str());
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
######################################################
|
||||
# Expose the current operation mode (OFF, ON, TIMER, BOOST)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Operation Mode State"
|
||||
lambda: |-
|
||||
// 0=OFF, 1=ON, 2=TIMER, 3=BOOST
|
||||
switch (id(operation_mode)) {
|
||||
case 0: return {"OFF"};
|
||||
case 1: return {"ON"};
|
||||
case 2: return {"TIMER"};
|
||||
case 3: return {"BOOST"};
|
||||
default: return {"UNKNOWN"};
|
||||
}
|
||||
update_interval: 5s
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning On Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_on) / 60;
|
||||
int minute = id(morning_on) % 60;
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Morning Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Morning Off Time"
|
||||
lambda: |-
|
||||
int hour = id(morning_off) / 60;
|
||||
int minute = id(morning_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening On" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening On Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_on) / 60;
|
||||
int minute = id(evening_on) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
######################################################
|
||||
# Expose the "Evening Off" time as a text (HH:MM)
|
||||
######################################################
|
||||
- platform: template
|
||||
name: "Timeclock: Evening Off Time"
|
||||
lambda: |-
|
||||
int hour = id(evening_off) / 60;
|
||||
int minute = id(evening_off) % 60;
|
||||
// Increase buffer size to 8 just to be safe
|
||||
// Increase to 16 for safety
|
||||
char buff[16];
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d", hour, minute);
|
||||
return { std::string(buff) };
|
||||
update_interval: "${update_interval}"
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO3
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
filters:
|
||||
- delayed_on: 20ms
|
||||
on_click:
|
||||
- min_length: 20ms
|
||||
max_length: 500ms
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(relay).state) {
|
||||
// Relay is ON: turn it OFF and set mode to 0 (TIMER)
|
||||
id(relay).turn_off();
|
||||
id(operation_mode) = 2;
|
||||
} else {
|
||||
// Relay is OFF: turn it ON and set mode to 3 (BOOST)
|
||||
id(relay).turn_on();
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
|
||||
- platform: template
|
||||
name: "Relay Status"
|
||||
lambda: |-
|
||||
return id(relay).state;
|
||||
|
||||
##########################################################################################
|
||||
# Sensors
|
||||
# https://esphome.io/components/text_sensor/index.html
|
||||
##########################################################################################
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Timeclock: Boost Duration"
|
||||
id: boost_duration_time
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
update_interval: "${update_interval}"
|
||||
lambda: |-
|
||||
return id(boost_duration);
|
||||
|
||||
- platform: template
|
||||
name: "Mins from Midnight"
|
||||
id: mins_from_midnight
|
||||
unit_of_measurement: "mins"
|
||||
accuracy_decimals: "0"
|
||||
update_interval: "${update_interval}"
|
||||
internal: True # No need to show this in Home Assistant
|
||||
lambda: |-
|
||||
return id(current_mins);
|
||||
|
||||
# A value in mins if a timer is running showing how many mins left
|
||||
- platform: template
|
||||
name: "Timer Minutes Remaining"
|
||||
id: timer_minutes_remaining
|
||||
unit_of_measurement: "Mins"
|
||||
update_interval: 5s
|
||||
accuracy_decimals: "0"
|
||||
lambda: |-
|
||||
// always zero if relay is off
|
||||
if (!id(relay).state) {
|
||||
return 0;
|
||||
}
|
||||
int rem = 0;
|
||||
// only calculate for mode 2 (scheduled) or mode 3 (BOOST)
|
||||
if (id(operation_mode) == 2) {
|
||||
int a = id(morning_off) - id(current_mins);
|
||||
int b = id(evening_off) - id(current_mins);
|
||||
// if a is negative, use b; otherwise pick the smaller of a or b
|
||||
rem = (a < 0) ? b : (a < b ? a : b);
|
||||
}
|
||||
else if (id(operation_mode) == 3) {
|
||||
rem = id(boost_duration) - id(boost_timer);
|
||||
}
|
||||
// never return negative
|
||||
return rem > 0 ? rem : 0;
|
||||
|
||||
|
||||
#################################################################################################
|
||||
# SWITCH COMPONENT
|
||||
# https://esphome.io/components/switch/
|
||||
#################################################################################################
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Power Output"
|
||||
pin: GPIO5
|
||||
id: relay
|
||||
restore_mode: RESTORE_DEFAULT_OFF # Ensures the relay is restored (or off) at boot
|
||||
#internal: true # Hides the switch from Home Assistant
|
||||
icon: "${relay_icon}"
|
||||
|
||||
#################################################################################################
|
||||
# BUTTON COMPONENT
|
||||
# https://esphome.io/components/button/index.html
|
||||
#################################################################################################
|
||||
button:
|
||||
- platform: template
|
||||
name: "Boost now"
|
||||
id: boost_button
|
||||
icon: "mdi:play-circle-outline"
|
||||
on_press:
|
||||
# 1) reset BOOST timer and set mode
|
||||
- lambda: |-
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
# 2) immediately re-evaluate relay state
|
||||
- script.execute: evaluate_relay_state
|
||||
- platform: template
|
||||
name: "Default timer settings"
|
||||
id: default_timer_settings_button
|
||||
icon: "mdi:restore"
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// Restore all timing globals to their YAML defaults
|
||||
id(morning_on) = ${morning_on_default};
|
||||
id(morning_off) = ${morning_off_default};
|
||||
id(evening_on) = ${evening_on_default};
|
||||
id(evening_off) = ${evening_off_default};
|
||||
id(boost_duration)= ${boost_duration_default};
|
||||
// Reset mode to TIMER and clear any running boost
|
||||
id(operation_mode)= 2;
|
||||
id(boost_timer) = 0;
|
||||
ESP_LOGI("timer","Default timer settings applied");
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SELECT COMPONENT
|
||||
# https://esphome.io/components/select/index.html
|
||||
#################################################################################################
|
||||
select:
|
||||
- platform: template
|
||||
name: "Operation Mode"
|
||||
id: operation_mode_select
|
||||
update_interval: 5s
|
||||
options:
|
||||
- "OFF"
|
||||
- "ON"
|
||||
- "TIMER"
|
||||
- "BOOST"
|
||||
|
||||
# show the current mode
|
||||
lambda: |-
|
||||
switch (id(operation_mode)) {
|
||||
case 1: return std::string("ON");
|
||||
case 2: return std::string("TIMER");
|
||||
case 3: return std::string("BOOST");
|
||||
default: return std::string("OFF");
|
||||
}
|
||||
|
||||
# when changed in HA, set mode & re-evaluate
|
||||
set_action:
|
||||
- lambda: |-
|
||||
if (x == "OFF") { id(operation_mode) = 0; }
|
||||
else if (x == "ON") { id(operation_mode) = 1; }
|
||||
else if (x == "TIMER") { id(operation_mode) = 2; }
|
||||
else { // BOOST
|
||||
id(boost_timer) = 0;
|
||||
id(operation_mode) = 3;
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
#################################################################################################
|
||||
# SCRIPT COMPONENT
|
||||
# https://esphome.io/components/script.html
|
||||
#################################################################################################
|
||||
# Script: evaluate and drive the relay
|
||||
script:
|
||||
- id: evaluate_relay_state
|
||||
then:
|
||||
- lambda: |-
|
||||
int mode = id(operation_mode);
|
||||
|
||||
// BOOST just forces the relay on
|
||||
if (mode == 3) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// OFF → always off
|
||||
if (mode == 0) {
|
||||
id(relay).turn_off();
|
||||
return;
|
||||
}
|
||||
|
||||
// ON → always on
|
||||
if (mode == 1) {
|
||||
id(relay).turn_on();
|
||||
return;
|
||||
}
|
||||
|
||||
// TIMER → follow schedule windows
|
||||
{
|
||||
bool should_on = false;
|
||||
if (id(current_mins) >= id(morning_on) && id(current_mins) < id(morning_off))
|
||||
should_on = true;
|
||||
if (id(current_mins) >= id(evening_on) && id(current_mins) < id(evening_off))
|
||||
should_on = true;
|
||||
if (should_on) id(relay).turn_on();
|
||||
else id(relay).turn_off();
|
||||
}
|
||||
|
||||
#################################################################################################
|
||||
# INTERVAL COMPONENT
|
||||
# https://esphome.io/components/interval.html
|
||||
#################################################################################################
|
||||
# Interval: bumps time (even if no SNTP), then calls the script to evaluate relay state
|
||||
interval:
|
||||
- interval: "1min"
|
||||
then:
|
||||
- lambda: |-
|
||||
// — update current_mins via SNTP or fallback
|
||||
if (!id(sntp_time).now().is_valid()) {
|
||||
id(current_mins)++;
|
||||
if (id(current_mins) >= 1440) id(current_mins) = 0;
|
||||
} else {
|
||||
auto now = id(sntp_time).now();
|
||||
id(current_mins) = now.hour * 60 + now.minute;
|
||||
}
|
||||
|
||||
// — if in BOOST, advance boost_timer and expire when done
|
||||
if (id(operation_mode) == 3) {
|
||||
id(boost_timer)++;
|
||||
if (id(boost_timer) >= id(boost_duration)) {
|
||||
id(operation_mode) = 2;
|
||||
//id(mqtt_client).publish("${mqtt_timer_topic}/operation", "TIMER");
|
||||
}
|
||||
}
|
||||
- script.execute: evaluate_relay_state
|
||||
|
||||
@@ -95,7 +95,7 @@ substitutions:
|
||||
mode_reset_window_ms: "3000" # treat OFF>=this ms as a reset-to-1 when turning back ON
|
||||
mode_prime_on: "800ms" # if relay is OFF when a color is selected, turn ON for this long before pulsing
|
||||
# Ignored modes bitmask: bit (mode_index-1). For 4 and 5 ignored -> (1<<3)|(1<<4) = 24.
|
||||
ignored_modes_mask: "0"
|
||||
ignored_modes_mask: "8288" # Ignore 6(32), 7(64), 14(8192) :: 32 + 64 + 8192 = 8288
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
@@ -735,15 +735,15 @@ select:
|
||||
- "3= Green"
|
||||
- "4= Purple"
|
||||
- "5= Aqua"
|
||||
- "6= Lime"
|
||||
- "7= Cool White"
|
||||
#- "6= Lime"
|
||||
#- "7= Cool White"
|
||||
- "8= Speed Up"
|
||||
- "9= Transformer"
|
||||
- "10= Blurple"
|
||||
- "11= Redlime"
|
||||
- "12= Greenqua"
|
||||
- "13= Bluequa"
|
||||
- "14= Grelime"
|
||||
#- "14= Grelime"
|
||||
- "15= Redurple"
|
||||
- "16= RGB Mad"
|
||||
|
||||
|
||||
Reference in New Issue
Block a user