Edit esp-entrancebathrmlights.yaml
This commit is contained in:
ESPHome Device Builder
@@ -6,6 +6,7 @@
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-entrancebathrmlights.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V4.0 2026-06-27 Added extract fan timer enable switch and minute countdown sensor
|
||||
# V3.9 2026-03-11 Updated yaml to zorruno layout V1.1
|
||||
# V3.8 2026-02-25 Updated yaml to zorruno layout V1.1
|
||||
# V3.7 2025-09-34 Upload to this bathroom (as noted in original header)
|
||||
@@ -21,16 +22,29 @@
|
||||
# - Entrance bathroom switch with 2 outputs:
|
||||
# 1) Main Lights
|
||||
# 2) Extract Fan
|
||||
#
|
||||
# - Optional extract fan timer:
|
||||
# - Controlled by the "Fan Timer Enabled" switch.
|
||||
# - When enabled, if the light is OFF and the fan is ON, the fan will run for the
|
||||
# configured fan_timer_duration_minutes, then turn OFF.
|
||||
# - Countdown starts when the light turns OFF while the fan is ON.
|
||||
# - Countdown also starts when the fan turns ON while the light is already OFF.
|
||||
# - Countdown is cancelled/reset if the light turns ON or the fan turns OFF manually.
|
||||
# - The timer remaining sensor shows whole minutes remaining.
|
||||
# - When idle, the timer remaining sensor sits at the configured timer duration.
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
|
||||
# - Local button control continues to toggle relays.
|
||||
# - Fan timer logic continues locally on the ESP device.
|
||||
# - MQTT/API publishing to HA may not be available until HA returns.
|
||||
# b) MQTT OFFLINE (or broker unreachable)
|
||||
# - Local button control continues to toggle relays.
|
||||
# - Fan timer logic continues locally on the ESP device.
|
||||
# - MQTT state updates (if any) will not publish.
|
||||
# c) Entire WiFi/Network OFFLINE
|
||||
# - Local button control continues to toggle relays.
|
||||
# - Fan timer logic continues locally on the ESP device.
|
||||
# - Accurate time is NOT needed (SNTP not needed).
|
||||
#:########################################################################################:#
|
||||
|
||||
@@ -42,12 +56,12 @@ substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-entrancebathrmlights"
|
||||
friendly_name: "Entrance Bathroom Lightswitch (2)"
|
||||
description_comment: "Entrance bathroom lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Extract Fan (2) (Layout V1.1)"
|
||||
description_comment: "Entrance bathroom lightswitch using a Zemismart KS-811 Double Push Button. Main Lights (1), Extract Fan (2), Fan Timer (Layout V1.1)"
|
||||
device_area: "Entranceway" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Double"
|
||||
project_version: "v3.9"
|
||||
project_version: "v4.0"
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
@@ -66,6 +80,9 @@ substitutions:
|
||||
switch_1_name: "Main Lights"
|
||||
switch_2_name: "Extract Fan"
|
||||
|
||||
# Fan Timer Settings
|
||||
fan_timer_duration_minutes: "10"
|
||||
|
||||
#:########################################################################################:#
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
@@ -101,7 +118,7 @@ packages:
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
@@ -146,6 +163,21 @@ status_led:
|
||||
number: GPIO2
|
||||
inverted: true
|
||||
|
||||
#:########################################################################################:#
|
||||
# GLOBALS
|
||||
# https://esphome.io/components/globals.html
|
||||
#:########################################################################################:#
|
||||
globals:
|
||||
- id: fan_timer_counting_down
|
||||
type: bool
|
||||
restore_value: false
|
||||
initial_value: "false"
|
||||
|
||||
- id: fan_timer_remaining_minutes
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: "0"
|
||||
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
@@ -175,12 +207,124 @@ binary_sensor:
|
||||
# https://esphome.io/components/switch/
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: template
|
||||
name: "Fan Timer Enabled"
|
||||
id: fan_timer_enabled
|
||||
icon: "mdi:fan-clock"
|
||||
optimistic: true
|
||||
restore_mode: RESTORE_DEFAULT_ON
|
||||
entity_category: config
|
||||
turn_on_action:
|
||||
- script.execute: fan_timer_evaluate
|
||||
turn_off_action:
|
||||
- script.execute: fan_timer_cancel
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
id: Relay_1
|
||||
on_turn_on:
|
||||
- script.execute: fan_timer_evaluate
|
||||
on_turn_off:
|
||||
- script.execute: fan_timer_evaluate
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
id: Relay_2
|
||||
on_turn_on:
|
||||
- script.execute: fan_timer_evaluate
|
||||
on_turn_off:
|
||||
- script.execute: fan_timer_evaluate
|
||||
|
||||
#:########################################################################################:#
|
||||
# SENSORS
|
||||
# https://esphome.io/components/sensor/
|
||||
#:########################################################################################:#
|
||||
sensor:
|
||||
- platform: template
|
||||
name: "Fan Timer Remaining Minutes"
|
||||
id: fan_timer_remaining_minutes_sensor
|
||||
icon: "mdi:timer-outline"
|
||||
unit_of_measurement: "min"
|
||||
accuracy_decimals: 0
|
||||
device_class: duration
|
||||
update_interval: 60s
|
||||
lambda: |-
|
||||
if (id(fan_timer_counting_down)) {
|
||||
return id(fan_timer_remaining_minutes);
|
||||
}
|
||||
|
||||
return ${fan_timer_duration_minutes};
|
||||
|
||||
#:########################################################################################:#
|
||||
# SCRIPTS
|
||||
# https://esphome.io/components/script.html
|
||||
#:########################################################################################:#
|
||||
script:
|
||||
- id: fan_timer_cancel
|
||||
mode: restart
|
||||
then:
|
||||
- script.stop: fan_timer_countdown
|
||||
- lambda: |-
|
||||
id(fan_timer_counting_down) = false;
|
||||
id(fan_timer_remaining_minutes) = 0;
|
||||
- component.update: fan_timer_remaining_minutes_sensor
|
||||
|
||||
- id: fan_timer_evaluate
|
||||
mode: restart
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: |-
|
||||
return id(fan_timer_enabled).state && !id(Relay_1).state && id(Relay_2).state;
|
||||
then:
|
||||
- script.execute: fan_timer_countdown
|
||||
else:
|
||||
- script.execute: fan_timer_cancel
|
||||
|
||||
- id: fan_timer_countdown
|
||||
mode: restart
|
||||
then:
|
||||
- lambda: |-
|
||||
id(fan_timer_counting_down) = true;
|
||||
id(fan_timer_remaining_minutes) = ${fan_timer_duration_minutes};
|
||||
- component.update: fan_timer_remaining_minutes_sensor
|
||||
|
||||
- while:
|
||||
condition:
|
||||
lambda: |-
|
||||
return id(fan_timer_counting_down)
|
||||
&& id(fan_timer_enabled).state
|
||||
&& !id(Relay_1).state
|
||||
&& id(Relay_2).state
|
||||
&& id(fan_timer_remaining_minutes) > 0;
|
||||
then:
|
||||
- delay: 60s
|
||||
- if:
|
||||
condition:
|
||||
lambda: |-
|
||||
return id(fan_timer_counting_down)
|
||||
&& id(fan_timer_enabled).state
|
||||
&& !id(Relay_1).state
|
||||
&& id(Relay_2).state
|
||||
&& id(fan_timer_remaining_minutes) > 0;
|
||||
then:
|
||||
- lambda: |-
|
||||
id(fan_timer_remaining_minutes) -= 1;
|
||||
- component.update: fan_timer_remaining_minutes_sensor
|
||||
|
||||
- if:
|
||||
condition:
|
||||
lambda: |-
|
||||
return id(fan_timer_counting_down)
|
||||
&& id(fan_timer_enabled).state
|
||||
&& !id(Relay_1).state
|
||||
&& id(Relay_2).state
|
||||
&& id(fan_timer_remaining_minutes) <= 0;
|
||||
then:
|
||||
- lambda: |-
|
||||
id(fan_timer_counting_down) = false;
|
||||
id(fan_timer_remaining_minutes) = 0;
|
||||
- component.update: fan_timer_remaining_minutes_sensor
|
||||
- switch.turn_off: Relay_2
|
||||
Reference in New Issue
Block a user