Edit esp-officedeskrightgpo.yaml

esphome/esp-officedeskrightgpo.yaml

@@ -44,7 +44,6 @@
 #    - Accurate time is NOT needed (SNTP not required)
 #:########################################################################################:#
 
-
 #:########################################################################################:#
 # SUBSTITUTIONS: Specific device variable substitutions
 # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
@@ -58,7 +57,7 @@ substitutions:
 
   # Project Naming
   project_name: "Sonoff Technologies.Sonoff Basic V1" # Project Details
-  project_version: "v1.1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
+  project_version: "v1.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
 
   # Passwords & Secrets
   api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
@@ -83,7 +82,6 @@ substitutions:
   mqtt_device_name: "office-deskright-gpo"
   mqtt_main_topic: "${mqtt_command_main_topic}/${mqtt_device_name}" # Topic we will use to command stuff from external without HA
 
-
 #:########################################################################################:#
 # PACKAGES: Included Common Packages
 # https://esphome.io/components/packages.html
@@ -123,7 +121,6 @@ packages:
   #diag_debug: !include common/include_debug_diag_sensors.yaml
   #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
 
-
 #:########################################################################################:#
 # ESPHOME:
 # https://esphome.io/components/esphome.html
@@ -137,13 +134,12 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
 
-
 #:########################################################################################:#
 # ESP PLATFORM AND FRAMEWORK:
 # https://esphome.io/components/esp8266.html
 #:########################################################################################:#
 esp8266:
-  board: esp01_1m  # The original Sonoff Basic
+  board: esp01_1m # The original Sonoff Basic
   restore_from_flash: true # restore some values on reboot
 
 preferences:
@@ -152,7 +148,6 @@ preferences:
 mdns:
   disabled: false
 
-
 #:########################################################################################:#
 # LOGGING:
 # https://esphome.io/components/logger.html
@@ -161,7 +156,6 @@ logger:
   level: "${log_level}"
   baud_rate: 0 # set to 0 for no logging via UART
 
-
 #:########################################################################################:#
 # STATUS LED:
 # https://esphome.io/components/status_led.html
@@ -172,7 +166,6 @@ status_led:
     number: GPIO13
     inverted: true
 
-
 #:########################################################################################:#
 # SWITCH COMPONENT:
 # https://esphome.io/components/switch/
@@ -186,7 +179,6 @@ switch:
     restore_mode: RESTORE_DEFAULT_ON
     icon: "${relay_icon}"
 
-
 #:########################################################################################:#
 # BINARY SENSORS:
 # https://esphome.io/components/binary_sensor/
@@ -222,12 +214,11 @@ binary_sensor:
     on_press:
       - mqtt.publish:
           topic: "${mqtt_main_topic}/relay1/state"
-          payload: "ON"
+          payload: "On"
     on_release:
       - mqtt.publish:
           topic: "${mqtt_main_topic}/relay1/state"
-          payload: "OFF"
-
+          payload: "Off"
 
 #:########################################################################################:#
 # MQTT:
@@ -237,11 +228,11 @@ mqtt:
   on_message:
     # Relay 1 control
     - topic: "${mqtt_main_topic}/relay1/set"
-      payload: "ON"
+      payload: "On"
       then:
         - switch.turn_on: relay1
 
     - topic: "${mqtt_main_topic}/relay1/set"
-      payload: "OFF"
+      payload: "Off"
       then:
-        - switch.turn_off: relay1
+        - switch.turn_off: relay1