Edit esp-bedside-panel.yaml
This commit is contained in:
ESPHome Device Builder
@@ -6,6 +6,7 @@
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedside-panel.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V0.6 2026-07-14 Added GT911 touchscreen and touch-coordinate logging
|
||||
# V0.5 2026-07-14 Added corrected JC1060P470 MIPI display configuration and text test
|
||||
# V0.4 2026-07-14 Removed MIPI display test after setup watchdog boot loop; retained backlight-only test
|
||||
# V0.3 2026-07-14 Added backlight control and first MIPI display text test
|
||||
@@ -33,28 +34,33 @@
|
||||
# - Touch I2C SCL: GPIO8
|
||||
# - Touch interrupt: GPIO21
|
||||
# - Touch reset: GPIO22
|
||||
# - Touch I2C address: 0x5D
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Flash this to the ESP32-P4 side of the board.
|
||||
# - This version is intended to confirm:
|
||||
# - ESPHome remains stable during display initialisation
|
||||
# - MIPI-DSI display initialises correctly
|
||||
# - Backlight control remains available in Home Assistant
|
||||
# - Basic text is rendered on the screen
|
||||
# - Display is left in its native landscape orientation for the first test.
|
||||
# - Portrait rotation will be configured after the display and touch are proven stable.
|
||||
# - MIPI-DSI display remains stable
|
||||
# - Display test text is rendered
|
||||
# - Backlight brightness remains adjustable from Home Assistant
|
||||
# - GT911 touchscreen initialises
|
||||
# - Touch coordinates appear in ESPHome logs
|
||||
# - Display remains in native landscape orientation for this test.
|
||||
# - Touch the screen at several locations and inspect the logs.
|
||||
# - Expected coordinate range is approximately:
|
||||
# - X: 0 to 1023
|
||||
# - Y: 0 to 599
|
||||
# - Portrait rotation and LVGL will be added after touch is confirmed.
|
||||
# - This version intentionally does not yet configure:
|
||||
# - Ethernet
|
||||
# - Touchscreen
|
||||
# - LVGL
|
||||
# - Ambient light sensor
|
||||
# - RTC
|
||||
# - Camera
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# - The display test is generated locally and does not require Home Assistant.
|
||||
# - Backlight control remains locally hosted by ESPHome.
|
||||
# - WiFi and Home Assistant are not required for the test text to remain visible.
|
||||
# - Display rendering and touch detection operate locally.
|
||||
# - Home Assistant is not required for the display or touchscreen to work.
|
||||
# - Backlight state is restored locally after restart.
|
||||
#:########################################################################################:#
|
||||
|
||||
#:########################################################################################:#
|
||||
@@ -66,12 +72,12 @@ substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-bedside-panel"
|
||||
friendly_name: "ESP Bedside Panel"
|
||||
description_comment: "Guition JC1060P470C_I_W_Y ESP32-P4 7 inch bedside control panel. Corrected MIPI display test. (Layout V1.1)"
|
||||
description_comment: "Guition JC1060P470C_I_W_Y ESP32-P4 7 inch bedside control panel. Display and GT911 touchscreen test. (Layout V1.1)"
|
||||
device_area: "Bedroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Guition.JC1060P470C_I_W_Y" # Project Details
|
||||
project_version: "v0.5" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_version: "v0.6" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
@@ -84,6 +90,13 @@ substitutions:
|
||||
# Display Settings
|
||||
backlight_pin: "GPIO23"
|
||||
backlight_frequency: "1220Hz"
|
||||
display_update_interval: "5s"
|
||||
|
||||
# Touchscreen Settings
|
||||
touch_sda_pin: "GPIO7"
|
||||
touch_scl_pin: "GPIO8"
|
||||
touch_interrupt_pin: "GPIO21"
|
||||
touch_reset_pin: "GPIO22"
|
||||
|
||||
#:########################################################################################:#
|
||||
# PACKAGES:
|
||||
@@ -233,6 +246,17 @@ time:
|
||||
- platform: homeassistant
|
||||
id: ha_time
|
||||
|
||||
#:########################################################################################:#
|
||||
# I2C:
|
||||
# https://esphome.io/components/i2c.html
|
||||
#:########################################################################################:#
|
||||
i2c:
|
||||
- id: touch_i2c
|
||||
sda: "${touch_sda_pin}"
|
||||
scl: "${touch_scl_pin}"
|
||||
frequency: 400kHz
|
||||
scan: true
|
||||
|
||||
#:########################################################################################:#
|
||||
# OUTPUT:
|
||||
# https://esphome.io/components/output/ledc.html
|
||||
@@ -270,14 +294,14 @@ display:
|
||||
number: GPIO5
|
||||
rotation: 0
|
||||
hsync_pulse_width: 20
|
||||
update_interval: 5s
|
||||
update_interval: "${display_update_interval}"
|
||||
auto_clear_enabled: true
|
||||
lambda: |-
|
||||
it.fill(Color(8, 12, 18));
|
||||
|
||||
it.printf(
|
||||
512,
|
||||
225,
|
||||
185,
|
||||
id(font_heading),
|
||||
Color::WHITE,
|
||||
TextAlign::CENTER,
|
||||
@@ -286,22 +310,67 @@ display:
|
||||
|
||||
it.printf(
|
||||
512,
|
||||
305,
|
||||
270,
|
||||
id(font_normal),
|
||||
Color(0, 190, 255),
|
||||
TextAlign::CENTER,
|
||||
"Guition JC1060P470C_I_W_Y"
|
||||
"Touchscreen Test"
|
||||
);
|
||||
|
||||
it.printf(
|
||||
512,
|
||||
365,
|
||||
335,
|
||||
id(font_small),
|
||||
Color(180, 180, 180),
|
||||
TextAlign::CENTER,
|
||||
"1024 x 600 MIPI-DSI Test"
|
||||
"Touch the screen and check the ESPHome logs"
|
||||
);
|
||||
|
||||
it.printf(
|
||||
512,
|
||||
390,
|
||||
id(font_small),
|
||||
Color(180, 180, 180),
|
||||
TextAlign::CENTER,
|
||||
"Expected range: X 0-1023 / Y 0-599"
|
||||
);
|
||||
|
||||
#:########################################################################################:#
|
||||
# TOUCHSCREEN:
|
||||
# https://esphome.io/components/touchscreen/gt911.html
|
||||
#:########################################################################################:#
|
||||
touchscreen:
|
||||
- platform: gt911
|
||||
id: main_touchscreen
|
||||
display: main_display
|
||||
i2c_id: touch_i2c
|
||||
address: 0x5D
|
||||
interrupt_pin:
|
||||
number: "${touch_interrupt_pin}"
|
||||
mode:
|
||||
input: true
|
||||
reset_pin:
|
||||
number: "${touch_reset_pin}"
|
||||
mode:
|
||||
output: true
|
||||
on_touch:
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGI(
|
||||
"touch",
|
||||
"Touch detected: x=%d, y=%d, x_raw=%d, y_raw=%d",
|
||||
touch.x,
|
||||
touch.y,
|
||||
touch.x_raw,
|
||||
touch.y_raw
|
||||
);
|
||||
|
||||
on_release:
|
||||
then:
|
||||
- logger.log:
|
||||
level: INFO
|
||||
format: "Touch released"
|
||||
|
||||
#:########################################################################################:#
|
||||
# FONTS:
|
||||
# https://esphome.io/components/font.html
|
||||
|
||||
Reference in New Issue
Block a user