From e20365c32b3d07b9de6e6d1a0b83c7c33316b8f5 Mon Sep 17 00:00:00 2001
From: ESPHome Device Builder <device-builder@esphome.io>
Date: Sat, 25 Jul 2026 21:55:09 +1200
Subject: [PATCH] Edit esp-bedrm3lights.yaml

---
 esphome/esp-bedrm3lights.yaml | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/esphome/esp-bedrm3lights.yaml b/esphome/esp-bedrm3lights.yaml
index 8027f2f..f9e697d 100644
--- a/esphome/esp-bedrm3lights.yaml
+++ b/esphome/esp-bedrm3lights.yaml
@@ -43,7 +43,6 @@
 #    - Accurate time is NOT needed (SNTP not required) for core operation
 #:########################################################################################:#
 
-
 #:########################################################################################:#
 # SUBSTITUTIONS: Specific device variable substitutions
 # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
@@ -83,18 +82,17 @@ substitutions:
   # Remote Light
   mqtt_remote_device_command_topic1: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/light/set"
   mqtt_remote_status_topic1: "${mqtt_local_status_main_topic}/${mqtt_remote_device_name}/light/state"
-  mqtt_remote_device_command_ON: "ON"
-  mqtt_remote_device_command_OFF: "OFF"
+  mqtt_remote_device_command_ON: "On"
+  mqtt_remote_device_command_OFF: "Off"
 
   # Remote Fan Speed (used for All Off)
   mqtt_remote_device_command_topic2: "${mqtt_local_command_main_topic}/${mqtt_remote_device_name}/speed/set"
   mqtt_remote_device_command_0: "0"
 
   # Switch Naming
-  switch_1_name: "Main Lights"    # Nothing physically connected to this output (ifan02 light is the real load)
+  switch_1_name: "Main Lights" # Nothing physically connected to this output (ifan02 light is the real load)
   switch_2_name: "All Lights Off" # Nothing physically connected to this output
 
-
 #:########################################################################################:#
 # PACKAGES: Included Common Packages
 # https://esphome.io/components/packages.html
@@ -134,7 +132,6 @@ packages:
   diag_debug: !include common/include_debug_diag_sensors.yaml
   #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
 
-
 #:########################################################################################:#
 # ESPHOME:
 # https://esphome.io/components/esphome.html
@@ -148,7 +145,6 @@ esphome:
     name: "${project_name}"
     version: "${project_version}"
 
-
 #:########################################################################################:#
 # ESP PLATFORM AND FRAMEWORK:
 # https://esphome.io/components/esp8266/
@@ -158,7 +154,6 @@ esp8266:
   early_pin_init: false # Recommended false where switches are involved. Defaults to true.
   board_flash_mode: dout # Default is dout
 
-
 #:########################################################################################:#
 # LOGGING: ESPHome Logging Enable
 # https://esphome.io/components/logger.html
@@ -169,7 +164,6 @@ logger:
   #esp8266_store_log_strings_in_flash: false
   #tx_buffer_size: 64
 
-
 #:########################################################################################:#
 # GLOBAL VARIABLES:
 # https://esphome.io/guides/automations.html#global-variables
@@ -180,7 +174,6 @@ globals:
     restore_value: false
     initial_value: "0"
 
-
 #:########################################################################################:#
 # STATUS LED:
 # https://esphome.io/components/status_led.html
@@ -190,7 +183,6 @@ status_led:
     number: GPIO2
     inverted: true
 
-
 #:########################################################################################:#
 # BINARY SENSORS:
 # https://esphome.io/components/binary_sensor/
@@ -255,7 +247,6 @@ binary_sensor:
           qos: 0
           retain: false
 
-
 #:########################################################################################:#
 # SWITCH COMPONENT:
 # https://esphome.io/components/switch/
@@ -272,7 +263,6 @@ switch:
     pin: GPIO12
     id: Relay_2
 
-
 #:########################################################################################:#
 # MQTT:
 # This adds device-specific MQTT command triggers to the common MQTT configuration.
@@ -288,4 +278,4 @@ mqtt:
     - topic: "${mqtt_remote_status_topic1}"
       payload: "${mqtt_remote_device_command_OFF}"
       then:
-        - switch.turn_off: Relay_1
\ No newline at end of file
+        - switch.turn_off: Relay_1