diff --git a/esphome/esp-downstloungeentry.yaml b/esphome/esp-downstloungeentry.yaml
index 3e46d6f..5a4cbcc 100644
--- a/esphome/esp-downstloungeentry.yaml
+++ b/esphome/esp-downstloungeentry.yaml
@@ -6,6 +6,7 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstloungeentry.yaml
 #:########################################################################################:#
 # VERSIONS:
+# v3.8 2026-07-20 Updated remote MQTT topics for the flattened downstairs lounge main lights topic
 # v3.7 2026-02-25 Updated yaml to zorruno layout V1.1
 # v3.6 2025-07-24 YAML tidyups
 #:########################################################################################:#
@@ -45,7 +46,6 @@
 #    - Accurate time is NOT needed (SNTP not needed)
 #:########################################################################################:#
 
-
 #:########################################################################################:#
 # SUBSTITUTIONS: Specific device variable substitutions
 # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
@@ -59,7 +59,7 @@ substitutions:
 
   # Project Naming
   project_name: "Zemismart Technologies.KS-811 Single"
-  project_version: "v3.7"
+  project_version: "v3.8"
 
   # Passwords & Secrets
   api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
@@ -78,8 +78,8 @@ substitutions:
 
   # MQTT REMOTE Controls
   mqtt_remote_device_name: "downst-lounge-main-lights"
-  mqtt_remote_device_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}/light1/set"
-  mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}/light1/state"
+  mqtt_remote_device_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}"
+  mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}"
   mqtt_remote_device_command_on: "On"
   mqtt_remote_device_command_off: "Off"
 
@@ -170,7 +170,7 @@ mqtt:
         - delay: 50ms
         - if:
             condition:
-              lambda: 'return !id(Relay_1).state;'
+              lambda: "return !id(Relay_1).state;"
             then:
               - switch.turn_on: Relay_1
 
@@ -180,7 +180,7 @@ mqtt:
         - delay: 50ms
         - if:
             condition:
-              lambda: 'return id(Relay_1).state;'
+              lambda: "return id(Relay_1).state;"
             then:
               - switch.turn_off: Relay_1
 
@@ -224,4 +224,4 @@ switch:
   - platform: gpio
     name: "Relay 1: ${switch_1_name}"
     pin: GPIO12
-    id: Relay_1
\ No newline at end of file
+    id: Relay_1