Edit esp-downstloungemain.yaml

esphome/esp-downstloungemain.yaml

@@ -201,6 +201,52 @@ status_led:
     number: GPIO2
     inverted: true
 
+#:########################################################################################:#
+# SCRIPTS
+# https://esphome.io/components/script.html
+#:########################################################################################:#
+script:
+  # Local/HA requested ON for Main Lights. Change the local relay immediately, then
+  # publish a non-retained command so any linked switch follows.
+  - id: mainlights_on
+    mode: restart
+    then:
+      - if:
+          condition:
+            lambda: "return !id(relay_1).state;"
+          then:
+            - switch.turn_on: relay_1
+      - mqtt.publish:
+          topic: "${mqtt_local_command_topic}"
+          payload: "On"
+          retain: false
+
+  # Local/HA requested OFF for Main Lights.
+  - id: mainlights_off
+    mode: restart
+    then:
+      - if:
+          condition:
+            lambda: "return id(relay_1).state;"
+          then:
+            - switch.turn_off: relay_1
+      - mqtt.publish:
+          topic: "${mqtt_local_command_topic}"
+          payload: "Off"
+          retain: false
+
+  # Physical Button 1 toggle logic.
+  - id: mainlights_toggle
+    mode: restart
+    then:
+      - if:
+          condition:
+            lambda: "return id(relay_1).state;"
+          then:
+            - script.execute: mainlights_off
+          else:
+            - script.execute: mainlights_on
+
 #:########################################################################################:#
 # BINARY SENSORS
 # https://esphome.io/components/binary_sensor/
@@ -214,8 +260,11 @@ binary_sensor:
       inverted: true
     use_interrupt: false
     name: "Button 1: ${switch_1_name}"
+    filters:
+      - delayed_on: 10ms
+      - delayed_off: 10ms
     on_press:
-      - switch.toggle: relay_1
+      - script.execute: mainlights_toggle
 
   # Button 2 (GPIO05)
   - platform: gpio
@@ -224,16 +273,22 @@ binary_sensor:
       mode: INPUT
       inverted: true
     name: "Button 2: ${switch_2_name}"
+    filters:
+      - delayed_on: 10ms
+      - delayed_off: 10ms
     on_press:
       - switch.toggle: relay_2
 
   # Button 3 (GPIO04)
   - platform: gpio
     pin:
-      number: GPIO4
+      number: GPIO04
       mode: INPUT
       inverted: true
     name: "Button 3: ${switch_3_name}"
+    filters:
+      - delayed_on: 10ms
+      - delayed_off: 10ms
     on_press:
       - switch.toggle: relay_3
 
@@ -242,19 +297,36 @@ binary_sensor:
 # https://esphome.io/components/switch/
 #:########################################################################################:#
 switch:
-  # Relay 1 (GPIO13) + publish MQTT status
-  - platform: gpio
+  # Exposed Home Assistant control for Main Lights. This controls the local relay and
+  # publishes the matching command so linked switches follow.
+  - platform: template
     name: "Relay 1: ${switch_1_name}"
+    id: relay_1_ha
+    lambda: |-
+      return id(relay_1).state;
+    turn_on_action:
+      - script.execute: mainlights_on
+    turn_off_action:
+      - script.execute: mainlights_off
+
+  # Physical Relay 1. Kept internal so HA uses the template switch above.
+  # Relay callbacks publish retained status only, not commands.
+  - platform: gpio
+    name: "Internal Relay 1: ${switch_1_name}"
+    internal: true
     pin: GPIO13
     id: relay_1
+    restore_mode: ${relay_restore_mode}
     on_turn_on:
       - mqtt.publish:
           topic: "${mqtt_local_status_topic}"
           payload: "On"
+          retain: true
     on_turn_off:
       - mqtt.publish:
           topic: "${mqtt_local_status_topic}"
           payload: "Off"
+          retain: true
 
   # Relay 2 (GPIO12)
   - platform: gpio