diff --git a/esphome/esp-downstairskitchleds.yaml b/esphome/esp-downstairskitchleds.yaml
index 8d48c97..71ce6c0 100644
--- a/esphome/esp-downstairskitchleds.yaml
+++ b/esphome/esp-downstairskitchleds.yaml
@@ -5,7 +5,7 @@
 #           https://devices.esphome.io/devices/Sinilink-XY-VFMS
 # Repo:     https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstairskitchleds.yaml
 #
-# v1.3 - 2025-08-22 Added a “max on time” setting (1–48 h, 0 = no limit)
+# v1.3 - 2025-08-22 Added a "max on time” setting (1-48 h, 0 = no limit)
 # v1.2 - 2025-08-21 Added defaults to “Device Specific Settings” in substitutions & a PWM % view
 # v1.1 - 2025-08-18 Full tidy-up as general-purpose LED strip controller
 # v1.0 - 2025-08-17 First setup (and replacement of Tasmota)
@@ -21,8 +21,8 @@
 # ------------------------------------------
 # OPERATION (as of v1.3)
 # ------------------------------------------
-# 1. General-purpose LED controller.
-# 2. Designed for the Sinilink XY-WFMS board with a MOSFET output (claimed ~5 A, 5–36 V DC).
+# 1. General-purpose LED controller. 
+# 2. Designed for the Sinilink XY-WFMS board with a MOSFET output (claimed 5A, 5-36 V DC).
 # 3. Global setting for MAX % output to extend LED life.
 # 4. Minimum output setting; switches fully OFF at/below the minimum to avoid low-PWM flicker.
 # 5. PWM frequency is set to 500 Hz by default. You can increase it, but higher values caused