Edit esp-centralstairs-bottom.yaml
This commit is contained in:
ESPHome Device Builder
@@ -6,6 +6,7 @@
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-centralstairs-bottom.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V3.8 2026-06-09 Added Downstairs Lights Bulk Activation virtual switch toggled by Button 1 double-click
|
||||
# V3.7 2025-09-24 Upload to this device
|
||||
# V3.5 2025-07-24 YAML tidyups
|
||||
#:########################################################################################:#
|
||||
@@ -15,7 +16,8 @@
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Light switch at bottom of the central stairs
|
||||
# - Button 1 toggles Relay 1 (Main Stair Lights - Lower) - physically connected
|
||||
# - Button 1 single-click toggles Relay 1 (Main Stair Lights - Lower) - physically connected
|
||||
# - Button 1 double-click toggles the Downstairs Lights Bulk Activation virtual switch for HA automations
|
||||
# - Button 2 controls Stair Footer Lights via MQTT (remote device), using Relay 2 as a local mirror state
|
||||
# - On MQTT connect, publishes current Relay 1 state to mqtt_status_topic_1 to keep remote status aligned
|
||||
#:########################################################################################:#
|
||||
@@ -27,19 +29,27 @@
|
||||
# Remote device 2 (Stair Footer Lights):
|
||||
# - Command topic: ${mqtt_command_topic_2} -> ON,OFF
|
||||
# - Status topic: ${mqtt_status_topic_2} -> ON,OFF
|
||||
#
|
||||
# HA virtual switch:
|
||||
# - Downstairs Lights Bulk Activation is exposed as a virtual switch for Home Assistant automations
|
||||
# - No custom MQTT command/status topic is defined for this virtual switch
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
|
||||
# - Physical buttons still operate (Relay 1 local toggle; Button 2 publishes MQTT for footer lights)
|
||||
# - Button 1 single-click continues to toggle Relay 1 locally
|
||||
# - Button 1 double-click still toggles the local virtual switch, but HA automations will not act until HA returns
|
||||
# - Button 2 continues to publish MQTT commands for footer lights
|
||||
# - Relay 1 state continues to be published to MQTT status topic
|
||||
# - HA entities are unavailable until HA returns
|
||||
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
|
||||
# - Relay 1 still toggles locally and remains controllable from HA via API
|
||||
# - Button 1 double-click can still toggle the virtual switch via HA API
|
||||
# - Button 2 cannot control footer lights (MQTT publish fails)
|
||||
# - Any MQTT state sync to remote devices will not occur while MQTT is down
|
||||
# c) Entire WiFi/Network OFFLINE
|
||||
# - Physical button 1 continues to toggle Relay 1 locally (standalone)
|
||||
# - Physical button 2 cannot control footer lights (no network transport)
|
||||
# - Button 1 single-click continues to toggle Relay 1 locally (standalone)
|
||||
# - Button 1 double-click can toggle the local virtual switch state, but HA will not see it until network returns
|
||||
# - Button 2 cannot control footer lights (no network transport)
|
||||
# - Timeclocks will drift without network (SNTP). Time of day can be reset by powering off then on again at 12pm (midday)
|
||||
#:########################################################################################:#
|
||||
|
||||
@@ -73,7 +83,7 @@ substitutions:
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_version: "v2.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# MQTT Controls
|
||||
mqtt_command_main_topic: !secret mqtt_command_main_topic
|
||||
@@ -255,8 +265,25 @@ binary_sensor:
|
||||
- delayed_on: 30ms
|
||||
- delayed_off: 30ms
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
on_multi_click:
|
||||
# Double-click toggles a HA-visible virtual switch only. The double-click pattern is
|
||||
# listed before the single-click pattern so a double-click does not also trigger the
|
||||
# Relay 1 single-click action.
|
||||
- timing:
|
||||
- ON for at most 600ms
|
||||
- OFF for at most 500ms
|
||||
- ON for at most 600ms
|
||||
- OFF for at least 150ms
|
||||
then:
|
||||
- switch.toggle: downstairs_lights_bulk_activation
|
||||
|
||||
# Single-click toggles the local Relay 1. This now waits for the click sequence to
|
||||
# finish so it can distinguish a single-click from a double-click.
|
||||
- timing:
|
||||
- ON for at most 600ms
|
||||
- OFF for at least 500ms
|
||||
then:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
@@ -288,6 +315,15 @@ binary_sensor:
|
||||
# https://esphome.io/components/switch/
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: template
|
||||
name: "Downstairs Lights Bulk Activation"
|
||||
id: downstairs_lights_bulk_activation
|
||||
icon: "mdi:lightbulb-group"
|
||||
optimistic: true
|
||||
restore_mode: ALWAYS_OFF
|
||||
# HA automation helper only. Double-click Button 1 to toggle this switch on/off.
|
||||
# It does not drive a relay directly and has no custom MQTT command/status topic.
|
||||
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
pin: GPIO13
|
||||
|
||||
Reference in New Issue
Block a user