more esphome devices and fixes
This commit is contained in:
root
+147
-86
@@ -1,39 +1,82 @@
|
||||
#############################################
|
||||
#############################################
|
||||
# LAUNDRY DRYER MACHINE POWER
|
||||
#:########################################################################################:#
|
||||
# TITLE: LAUNDRY DRYER MACHINE POWER
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-laundrydrypow.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V1.1 2026-03-11 Updated yaml to zorruno layout V1.1
|
||||
# V1.0 2025-05-28 Initial Version
|
||||
#############################################
|
||||
# Sonoff POW R1
|
||||
# https://devices.esphome.io/devices/Sonoff-POW-R1
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# - Sonoff POW R1
|
||||
# - ESP8266 based
|
||||
# - HLW8012 power monitoring
|
||||
# - Single relay output
|
||||
# - Blue status LED on GPIO15
|
||||
# - Local push button on GPIO0
|
||||
# - Relay output on GPIO12
|
||||
# - Reference: https://devices.esphome.io/devices/Sonoff-POW-R1
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Monitors dryer load current, voltage, and power
|
||||
# - Provides a virtual relay switch that controls the physical relay and LED together
|
||||
# - Local button toggles the virtual relay switch
|
||||
# - On boot, the virtual relay is turned ON
|
||||
# - "Load Running" turns ON when measured power is above 4 W
|
||||
# - "Load Running" uses delayed_off: 15s to avoid rapid state changes
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant offline (network and MQTT online):
|
||||
# - Device continues running normally
|
||||
# - Local button still works
|
||||
# - MQTT remains available if your common MQTT package is enabled and broker is reachable
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
# b) MQTT offline (or HA/MQTT offline):
|
||||
# - Device continues running locally
|
||||
# - Local button, relay control, LED control, and power monitoring still work
|
||||
#
|
||||
#############################################
|
||||
#############################################
|
||||
# c) Entire WiFi/Network offline:
|
||||
# - Device continues running locally
|
||||
# - Local button, relay control, LED control, and power monitoring still work
|
||||
# - Accurate time is not needed; SNTP is not required for operation
|
||||
#:########################################################################################:#
|
||||
|
||||
#############################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS:
|
||||
# Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
device_name: "esp-laundrydrypow" # Reference name for the device in the system.
|
||||
project_name: "Sonoff Technologies.POW R1" # Project Details
|
||||
project_version: "v1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
entity_prefix: "Load" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current.
|
||||
# Device Naming
|
||||
device_name: "esp-laundrydrypow"
|
||||
friendly_name: "Laundry Dryer Power"
|
||||
description_comment: "Laundry Dryer Power using a Sonoff Pow R1."
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
api_key: !secret esp-laundrydrypow_api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-laundrydrypow_ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-laundrydrypow_ip
|
||||
log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
update_interval: "60s" # update time for for general sensors etc
|
||||
description_comment: "Laundry Dryer Power using a Sonoff Pow R1. (Layout V1.1)"
|
||||
device_area: "Laundry"
|
||||
|
||||
##########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
# Project Naming
|
||||
project_name: "Sonoff Technologies.POW R1"
|
||||
project_version: "v1.1"
|
||||
|
||||
# Entity Naming
|
||||
entity_prefix: "Load"
|
||||
|
||||
# Passwords and Secrets
|
||||
api_key: !secret esp-laundrydrypow_api_key
|
||||
ota_pass: !secret esp-laundrydrypow_ota_pass
|
||||
static_ip_address: !secret esp-laundrydrypow_ip
|
||||
current_ip_address: ${static_ip_address}
|
||||
|
||||
# Device Settings
|
||||
log_level: "INFO"
|
||||
update_interval: "60s"
|
||||
|
||||
#:########################################################################################:#
|
||||
# PACKAGES:
|
||||
# Included common packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
@@ -41,12 +84,13 @@ packages:
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_current_ip_address: "${current_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
|
||||
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
||||
common_api: !include
|
||||
file: common/api_common.yaml
|
||||
#file: common/api_common_noencryption.yaml
|
||||
# file: common/api_common_noencryption.yaml
|
||||
vars:
|
||||
local_api_key: "${api_key}"
|
||||
|
||||
@@ -55,137 +99,154 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
# common_webportal: !include common/webportal_common.yaml
|
||||
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
# common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
# diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
# diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
#############################################
|
||||
# ESPHome
|
||||
#:########################################################################################:#
|
||||
# ESPHOME:
|
||||
# https://esphome.io/components/esphome.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${description_comment}" # Appears on the esphome page in HA
|
||||
comment: "${description_comment}"
|
||||
area: "${device_area}"
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
on_boot:
|
||||
on_boot:
|
||||
priority: 200
|
||||
then:
|
||||
- switch.turn_on: "virtual_button"
|
||||
- switch.turn_on: virtual_button
|
||||
|
||||
#############################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
# ESP PLATFORM AND FRAMEWORK:
|
||||
# https://esphome.io/components/esp8266.html
|
||||
#:########################################################################################:#
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
early_pin_init: false
|
||||
board_flash_mode: dout
|
||||
|
||||
#############################################
|
||||
# ESPHome Logging Enable
|
||||
#:########################################################################################:#
|
||||
# LOGGER:
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: ${log_level} #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
level: "${log_level}"
|
||||
# baud_rate: 0
|
||||
# esp8266_store_log_strings_in_flash: false
|
||||
# tx_buffer_size: 64
|
||||
|
||||
#############################################
|
||||
# STATUS LED
|
||||
#:########################################################################################:#
|
||||
# STATUS LED:
|
||||
# https://esphome.io/components/status_led.html
|
||||
#############################################
|
||||
#status_led:
|
||||
# pin:
|
||||
# number: GPIO2
|
||||
# inverted: yes
|
||||
#:########################################################################################:#
|
||||
# status_led:
|
||||
# pin:
|
||||
# number: GPIO2
|
||||
# inverted: true
|
||||
|
||||
#############################################
|
||||
# SENSORS
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS:
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO0
|
||||
mode: INPUT_PULLUP
|
||||
inverted: True
|
||||
name: Button
|
||||
inverted: true
|
||||
name: "Button"
|
||||
on_press:
|
||||
- switch.toggle: virtual_button
|
||||
|
||||
- platform: template
|
||||
name: ${entity_prefix} Running
|
||||
name: "${entity_prefix} Running"
|
||||
filters:
|
||||
- delayed_off: 15s
|
||||
lambda: |-
|
||||
if (isnan(id(power).state)) {
|
||||
return {};
|
||||
} else if (id(power).state > 4) {
|
||||
// Running
|
||||
return true;
|
||||
} else {
|
||||
// Not running
|
||||
return false;
|
||||
}
|
||||
|
||||
#:########################################################################################:#
|
||||
# SENSORS:
|
||||
# https://esphome.io/components/sensor/
|
||||
#:########################################################################################:#
|
||||
sensor:
|
||||
- platform: hlw8012
|
||||
sel_pin: 5
|
||||
cf_pin: 14
|
||||
cf1_pin: 13
|
||||
sel_pin: GPIO5
|
||||
cf_pin: GPIO14
|
||||
cf1_pin: GPIO13
|
||||
update_interval: 2s
|
||||
current:
|
||||
name: ${entity_prefix} Current
|
||||
name: "${entity_prefix} Current"
|
||||
voltage:
|
||||
name: ${entity_prefix} Voltage
|
||||
name: "${entity_prefix} Voltage"
|
||||
power:
|
||||
name: ${entity_prefix} Power
|
||||
name: "${entity_prefix} Power"
|
||||
id: power
|
||||
#on_value_range:
|
||||
# - above: 4.0
|
||||
# then:
|
||||
# - light.turn_on: led
|
||||
# - below: 3.0
|
||||
# then:
|
||||
# - light.turn_off: led
|
||||
# on_value_range:
|
||||
# - above: 4.0
|
||||
# then:
|
||||
# - light.turn_on: led
|
||||
# - below: 3.0
|
||||
# then:
|
||||
# - light.turn_off: led
|
||||
|
||||
#:########################################################################################:#
|
||||
# SWITCH:
|
||||
# https://esphome.io/components/switch/
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: template
|
||||
name: "Relay"
|
||||
optimistic: true
|
||||
id: virtual_button
|
||||
optimistic: true
|
||||
turn_on_action:
|
||||
- switch.turn_on: relay
|
||||
- light.turn_on: led
|
||||
turn_off_action:
|
||||
- switch.turn_off: relay
|
||||
- light.turn_off: led
|
||||
|
||||
- platform: gpio
|
||||
id: relay
|
||||
pin: GPIO12
|
||||
#restore_mode: ALWAYS_ON # Or RESTORE_DEFAULT_ON/RESTORE_DEFAULT_OFF
|
||||
# restore_mode: ALWAYS_ON
|
||||
|
||||
#:########################################################################################:#
|
||||
# OUTPUT:
|
||||
# https://esphome.io/components/output/
|
||||
#:########################################################################################:#
|
||||
output:
|
||||
- platform: esp8266_pwm
|
||||
id: pow_blue_led
|
||||
pin:
|
||||
number: GPIO15
|
||||
inverted: True
|
||||
inverted: true
|
||||
|
||||
#:########################################################################################:#
|
||||
# LIGHT:
|
||||
# https://esphome.io/components/light/
|
||||
#:########################################################################################:#
|
||||
light:
|
||||
- platform: monochromatic
|
||||
name: Status LED
|
||||
name: "Status LED"
|
||||
output: pow_blue_led
|
||||
id: led
|
||||
Reference in New Issue
Block a user