more esphome devices and fixes
This commit is contained in:
root
+130
-74
@@ -1,39 +1,90 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# LAUNDRY MAIN LIGHTSWITCH
|
||||
#:########################################################################################:#
|
||||
# TITLE: LAUNDRY MAIN LIGHTSWITCH
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-laundrylights.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V3.6 2026-03-11 Updated yaml to zorruno layout V1.1
|
||||
# V3.5 2025-07-24 YAML tidyups
|
||||
# V3.0 2025-06-05 YAML tidyups
|
||||
# V2.0 2025-06-01 Was initially a 3 button switch, now 2
|
||||
# V1.0 2025-05-30 Initial Version
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Double push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# - Zemismart KS-811 Double push button
|
||||
# - ESP8266 based
|
||||
# - pinout/schematic:
|
||||
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
# - Relay 1 output on GPIO13
|
||||
# - Relay 2 output on GPIO12
|
||||
# - Button 1 input on GPIO16
|
||||
# - Button 2 input on GPIO5
|
||||
# - Status LED on GPIO2
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Button 1 toggles Relay 1 for the laundry lights
|
||||
# - Button 2 supports two actions:
|
||||
# - Single click toggles Relay 2 locally
|
||||
# - Hold for 2 seconds or more sends MQTT ON/OFF to the remote device
|
||||
# - Relay 2 is turned ON at boot
|
||||
# - Remote MQTT status is subscribed to and normalised to ON/OFF/TRUE/FALSE/1/0
|
||||
# - If the remote state is unknown, a hold on Button 2 defaults to sending ON
|
||||
# - This switch is used for:
|
||||
# - Laundry Lights (1)
|
||||
# - Laundry Power Enable (2)
|
||||
#:########################################################################################:#
|
||||
# MQTT COMMANDS:
|
||||
# - Remote device command topic:
|
||||
# - ${mqtt_remote1_command_topic}
|
||||
# - Remote device status topic:
|
||||
# - ${mqtt_remote1_status_topic}
|
||||
# - Hold Button 2:
|
||||
# - Sends OFF if remote state is known and currently ON
|
||||
# - Sends ON otherwise
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant offline (network and MQTT online):
|
||||
# - Local buttons and local relays continue to work
|
||||
# - Remote MQTT control/status for Button 2 hold still works if the MQTT broker is online
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
# b) MQTT offline (or HA/MQTT offline):
|
||||
# - Local buttons and local relays continue to work
|
||||
# - Button 2 single click still toggles Relay 2 locally
|
||||
# - Button 2 hold cannot control the remote MQTT device
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# c) Entire WiFi/Network offline:
|
||||
# - Local buttons and local relays continue to work
|
||||
# - Remote MQTT control/status is unavailable
|
||||
# - Accurate time is not needed; SNTP is not required for operation
|
||||
#:########################################################################################:#
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS:
|
||||
# Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
# Device Naming
|
||||
# Device Naming
|
||||
device_name: "esp-laundrylights"
|
||||
friendly_name: "Laundry Main Lightswitch (2)"
|
||||
description_comment: "Laundry Main Lightswitch using a Zemismart KS-811 Double Push Button. Laundry Lights (1), Laundry Power Signal (2)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
description_comment: "Laundry Main Lightswitch using a Zemismart KS-811 Double Push Button. Laundry Lights (1), Laundry Power Signal (2) (Layout V1.1)"
|
||||
device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v3.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v3.6" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-laundrylights_ip
|
||||
|
||||
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
||||
# Don't forget to switch it back when changed.
|
||||
current_ip_address: ${static_ip_address}
|
||||
|
||||
mqtt_command_main_topic: !secret mqtt_command_main_topic
|
||||
mqtt_status_main_topic: !secret mqtt_status_main_topic
|
||||
|
||||
@@ -49,14 +100,15 @@ substitutions:
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Laundry Lights"
|
||||
switch_2_name: "Laundry Power Enable" # This is virtual only, no power connected to 3rd relay
|
||||
#switch_3_name: "Fan 3 Relay"
|
||||
#switch_4_name: "Fan 4 Relay"
|
||||
switch_2_name: "Laundry Power Enable" # This is virtual only, no power connected to 3rd relay
|
||||
#switch_3_name: "Fan 3 Relay"
|
||||
#switch_4_name: "Fan 4 Relay"
|
||||
|
||||
#########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
#:########################################################################################:#
|
||||
# PACKAGES:
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
@@ -64,6 +116,7 @@ packages:
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_current_ip_address: "${current_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
|
||||
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
||||
@@ -78,22 +131,23 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome
|
||||
#:########################################################################################:#
|
||||
# ESPHOME:
|
||||
# https://esphome.io/components/esphome.html
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
@@ -102,70 +156,70 @@ esphome:
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
on_boot:
|
||||
on_boot:
|
||||
priority: 200
|
||||
then:
|
||||
- switch.turn_on: Relay_2
|
||||
|
||||
#########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
# ESP PLATFORM AND FRAMEWORK:
|
||||
# https://esphome.io/components/esp8266.html
|
||||
#:########################################################################################:#
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
#:########################################################################################:#
|
||||
# LOGGER:
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#########################################################################################
|
||||
# STATUS LED
|
||||
#:########################################################################################:#
|
||||
# STATUS LED:
|
||||
# https://esphome.io/components/status_led.html
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
inverted: true
|
||||
|
||||
#########################################################################################
|
||||
# GLOBAL VARIABLES
|
||||
#
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
# GLOBAL VARIABLES:
|
||||
#:########################################################################################:#
|
||||
globals:
|
||||
- id: remote1_state
|
||||
type: bool
|
||||
restore_value: no
|
||||
initial_value: 'false'
|
||||
restore_value: false
|
||||
initial_value: "false"
|
||||
|
||||
- id: remote1_known
|
||||
type: bool
|
||||
restore_value: no
|
||||
initial_value: 'false'
|
||||
restore_value: false
|
||||
initial_value: "false"
|
||||
|
||||
#########################################################################################
|
||||
# BINARY SENSORS
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS:
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
inverted: true
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
number: GPIO5
|
||||
mode: INPUT
|
||||
inverted: true
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
@@ -177,18 +231,21 @@ binary_sensor:
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(Relay_2).state;'
|
||||
lambda: |-
|
||||
return id(Relay_2).state;
|
||||
then:
|
||||
- switch.turn_off: Relay_2
|
||||
else:
|
||||
- switch.turn_on: Relay_2
|
||||
|
||||
# HOLD: pressed for 2s or more -> toggle remote; default to ON if unknown
|
||||
- timing:
|
||||
- ON for at least 2s
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(remote1_known) && id(remote1_state);' # known AND currently ON
|
||||
lambda: |-
|
||||
return id(remote1_known) && id(remote1_state); // known AND currently ON
|
||||
then:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote1_command_topic}"
|
||||
@@ -200,10 +257,9 @@ binary_sensor:
|
||||
payload: "ON"
|
||||
retain: false
|
||||
|
||||
#########################################################################################
|
||||
# TEXT SENSORS
|
||||
#
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
# TEXT SENSORS:
|
||||
#:########################################################################################:#
|
||||
text_sensor:
|
||||
- platform: mqtt_subscribe
|
||||
id: remote1_status
|
||||
@@ -214,11 +270,13 @@ text_sensor:
|
||||
- lambda: |-
|
||||
// copy, trim whitespace, uppercase
|
||||
std::string s = x;
|
||||
|
||||
// trim leading/trailing whitespace
|
||||
auto notspace = [](int ch){ return !std::isspace(ch); };
|
||||
auto notspace = [](int ch) { return !std::isspace(ch); };
|
||||
s.erase(s.begin(), std::find_if(s.begin(), s.end(), notspace));
|
||||
s.erase(std::find_if(s.rbegin(), s.rend(), notspace).base(), s.end());
|
||||
for (auto &c : s) c = (char)toupper(c);
|
||||
|
||||
for (auto &c : s) c = (char) toupper(c);
|
||||
|
||||
bool recognized = false;
|
||||
if (s == "ON" || s == "1" || s == "TRUE") {
|
||||
@@ -233,15 +291,16 @@ text_sensor:
|
||||
// unknown payload (e.g. "ONLINE", "OFFLINE", JSON, etc.)
|
||||
id(remote1_known) = false;
|
||||
}
|
||||
|
||||
ESP_LOGI("remote1_status", "Parsed status='%s' -> known=%s state=%s",
|
||||
s.c_str(),
|
||||
id(remote1_known) ? "true" : "false",
|
||||
id(remote1_state) ? "ON" : "OFF");
|
||||
|
||||
#########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
#:########################################################################################:#
|
||||
# SWITCH COMPONENT:
|
||||
# https://esphome.io/components/switch/
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
@@ -251,7 +310,4 @@ switch:
|
||||
- platform: gpio
|
||||
name: "Relay 2: ${switch_2_name}"
|
||||
pin: GPIO12
|
||||
id: Relay_2
|
||||
|
||||
|
||||
|
||||
id: Relay_2
|
||||
Reference in New Issue
Block a user