more esphome devices and fixes
This commit is contained in:
root
@@ -1,35 +1,86 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# LOUNGE SOUTH LEFT LIGHTSWITCH
|
||||
#:########################################################################################:#
|
||||
# TITLE: LOUNGE SOUTH LEFT LIGHTSWITCH
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-loungesouthleftswitch.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V4.1 2026-03-11 Updated yaml to zorruno layout V1.1
|
||||
# V4.0 2025-10-04 Copied from other device
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Double push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# - Zemismart KS-811 Double push button
|
||||
# - ESP8266 based
|
||||
# - pinout/schematic:
|
||||
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
# - Relay 1 output on GPIO13
|
||||
# - Relay 2 output on GPIO12
|
||||
# - Button 1 input on GPIO16
|
||||
# - Button 2 input on GPIO5
|
||||
# - Status LED on GPIO2
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Lounge South Left switch with 2 outputs:
|
||||
# 1) Wall Washer Left
|
||||
# 2) Outside Light 1
|
||||
# - Button 1 toggles Relay_1 locally
|
||||
# - Button 2 toggles Relay_2 locally
|
||||
# - Relay_2 is synchronised with a remote MQTT device:
|
||||
# - Remote device name: garage-corridor-lights
|
||||
# - Remote ON/OFF commands are mirrored locally
|
||||
# - Local Relay_2 ON/OFF changes are published back to the remote topic
|
||||
# - A guard flag is used to prevent MQTT feedback loops when Relay_2 state changes originate remotely
|
||||
#:########################################################################################:#
|
||||
# MQTT COMMANDS:
|
||||
# - Remote command topic:
|
||||
# - ${mqtt_remote_command_topic}
|
||||
# - Remote status topic:
|
||||
# - ${mqtt_remote_status_topic}
|
||||
# - Payloads used:
|
||||
# - ON
|
||||
# - OFF
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant offline (network and MQTT online):
|
||||
# - Local button control continues to operate both relays
|
||||
# - Relay_2 MQTT sync with the remote device continues if MQTT broker is online
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# b) MQTT offline (or HA/MQTT offline):
|
||||
# - Local button control continues to operate both relays
|
||||
# - Relay_2 sync to the remote MQTT device is unavailable
|
||||
#
|
||||
# c) Entire WiFi/Network offline:
|
||||
# - Local button control continues to operate both relays
|
||||
# - Relay_2 sync to the remote MQTT device is unavailable
|
||||
# - Accurate time is not needed; SNTP is not required for operation
|
||||
#:########################################################################################:#
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS:
|
||||
# Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
# Device Naming
|
||||
# Device Naming
|
||||
device_name: "esp-loungesouthleftswitch"
|
||||
friendly_name: "Lounge South Left Lightswitch (2)"
|
||||
description_comment: "Lounge South Left Lightswitch using a Zemismart KS-811 Double Push Button. Wall Washer Left (1), Outside Light 1 (2)"
|
||||
device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
description_comment: "Lounge South Left Lightswitch using a Zemismart KS-811 Double Push Button. Wall Washer Left (1), Outside Light 1 (2) (Layout V1.1)"
|
||||
device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v4.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_name: "Zemismart Technologies.KS-811 Double" # Project Details
|
||||
project_version: "v4.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords & Secrets
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-loungesouthleftswitch_ip
|
||||
|
||||
# If we are changing IP addresses, you must update the current IP address here, otherwise it remains
|
||||
# Don't forget to switch it back when changed.
|
||||
current_ip_address: ${static_ip_address}
|
||||
|
||||
mqtt_command_main_topic: !secret mqtt_command_main_topic
|
||||
mqtt_status_main_topic: !secret mqtt_status_main_topic
|
||||
|
||||
@@ -41,19 +92,19 @@ substitutions:
|
||||
# MQTT REMOTE Controls
|
||||
mqtt_remote_device_name: "garage-corridor-lights"
|
||||
mqtt_remote_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}"
|
||||
mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}"
|
||||
mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}"
|
||||
mqtt_remote_device_command_ON: "ON"
|
||||
mqtt_remote_device_command_OFF: "OFF"
|
||||
|
||||
# Switch Naming
|
||||
switch_1_name: "Wall Washer Left"
|
||||
switch_2_name: "Outside Light 1"
|
||||
#switch_3_name: "Nil"
|
||||
|
||||
#########################################################################################
|
||||
# PACKAGES: Included Common Packages
|
||||
#:########################################################################################:#
|
||||
# PACKAGES:
|
||||
# Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
@@ -62,6 +113,7 @@ packages:
|
||||
local_device_name: "${device_name}"
|
||||
local_static_ip_address: "${static_ip_address}"
|
||||
local_ota_pass: "${ota_pass}"
|
||||
local_current_ip_address: "${current_ip_address}"
|
||||
|
||||
#### HOME ASSISTANT API (choose encryption or no encryption options) ####
|
||||
common_api: !include
|
||||
@@ -75,23 +127,23 @@ packages:
|
||||
file: common/mqtt_common.yaml
|
||||
vars:
|
||||
local_device_name: "${device_name}"
|
||||
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
|
||||
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome
|
||||
#:########################################################################################:#
|
||||
# ESPHOME:
|
||||
# https://esphome.io/components/esphome.html
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
@@ -101,64 +153,71 @@ esphome:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
|
||||
#########################################################################################
|
||||
# ESP Platform and Framework
|
||||
# https://esphome.io/components/esp32.html
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
# ESP PLATFORM AND FRAMEWORK:
|
||||
# https://esphome.io/components/esp8266.html
|
||||
#:########################################################################################:#
|
||||
esp8266:
|
||||
board: esp01_1m
|
||||
early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
|
||||
board_flash_mode: dout # Default is dout
|
||||
|
||||
#########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
#:########################################################################################:#
|
||||
# LOGGER:
|
||||
# https://esphome.io/components/logger.html
|
||||
#############################################
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
#baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
#esp8266_store_log_strings_in_flash: false
|
||||
#tx_buffer_size: 64
|
||||
|
||||
#:########################################################################################:#
|
||||
# GLOBAL VARIABLES:
|
||||
#:########################################################################################:#
|
||||
globals:
|
||||
- id: relay2_change_origin_remote
|
||||
type: bool
|
||||
restore_value: no
|
||||
restore_value: false
|
||||
initial_value: "false"
|
||||
|
||||
#########################################################################################
|
||||
# STATUS LED
|
||||
#:########################################################################################:#
|
||||
# STATUS LED:
|
||||
# https://esphome.io/components/status_led.html
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
status_led:
|
||||
pin:
|
||||
number: GPIO2
|
||||
inverted: yes
|
||||
inverted: true
|
||||
|
||||
#########################################################################################
|
||||
# BINARY SENSORS
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS:
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO16
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
use_interrupt: false # This pin doesn't support interrupts so use polling. Only supresses a warning.
|
||||
inverted: true
|
||||
use_interrupt: false # This pin doesn't support interrupts so use polling. Only suppresses a warning.
|
||||
name: "Button 1: ${switch_1_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_1
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO05
|
||||
number: GPIO5
|
||||
mode: INPUT
|
||||
inverted: True
|
||||
inverted: true
|
||||
name: "Button 2: ${switch_2_name}"
|
||||
on_press:
|
||||
- switch.toggle: Relay_2
|
||||
|
||||
#:########################################################################################:#
|
||||
# TEXT SENSOR COMPONENT:
|
||||
# https://esphome.io/components/text_sensor/
|
||||
#:########################################################################################:#
|
||||
text_sensor:
|
||||
- platform: mqtt_subscribe
|
||||
id: remote2_status
|
||||
@@ -192,10 +251,10 @@ text_sensor:
|
||||
id(relay2_change_origin_remote) = true;
|
||||
- switch.turn_off: Relay_2
|
||||
|
||||
#########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
#:########################################################################################:#
|
||||
# SWITCH COMPONENT:
|
||||
# https://esphome.io/components/switch/
|
||||
#########################################################################################
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
@@ -223,7 +282,4 @@ switch:
|
||||
- mqtt.publish:
|
||||
topic: "${mqtt_remote_command_topic}"
|
||||
payload: "${mqtt_remote_device_command_OFF}"
|
||||
- lambda: 'id(relay2_change_origin_remote) = false;'
|
||||
|
||||
|
||||
|
||||
- lambda: 'id(relay2_change_origin_remote) = false;'
|
||||
Reference in New Issue
Block a user