more esphome devices and fixes
This commit is contained in:
root
@@ -1,38 +1,81 @@
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
# MAIN BATHROOM LIGHTSWITCH 2 (OBK Converted, BK7231N)
|
||||
#:########################################################################################:#
|
||||
# TITLE: MAIN BATHROOM LIGHTSWITCH 2 (OBK Converted, BK7231N)
|
||||
# zorruno.com layout v1.1 2026
|
||||
#:########################################################################################:#
|
||||
# REPO:
|
||||
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-mainbathroomlights.yaml
|
||||
#:########################################################################################:#
|
||||
# VERSIONS:
|
||||
# V2.2 2026-03-11 Updated yaml to zorruno layout V1.1
|
||||
# V2.1 2026-02-23 Button 3 multi-click publishes MQTT commands to bathroom fan (1x/2x/3x)
|
||||
# V2.0 2026-02-04 Reflash into new switch (old switch electrical failure, now a BK)
|
||||
# V1.0 2025-11-23 Initial
|
||||
##########################################################################################
|
||||
# Zemismart KS-811 Triple push button
|
||||
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#
|
||||
# NOTES
|
||||
# -
|
||||
#
|
||||
##########################################################################################
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# HARDWARE:
|
||||
# - Zemismart KS-811 Triple push button
|
||||
# - BK7231N based switch
|
||||
# - BK72XX board: generic-bk7231n-qfn32-tuya
|
||||
# - pinout/schematic:
|
||||
# https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
|
||||
#:########################################################################################:#
|
||||
# OPERATION NOTES:
|
||||
# - Main bathroom switch with 3 outputs:
|
||||
# 1) Main Lights
|
||||
# 2) Shower Lights
|
||||
# 3) Cabinet Lights
|
||||
# - Button 1 toggles Relay_2 (as currently coded in the source yaml)
|
||||
# - Button 2 toggles Relay_2
|
||||
# - Button 3 immediate press action turns OFF Relay_2 and Relay_3
|
||||
# - Button 3 also sends MQTT commands to the bathroom fan based on click count:
|
||||
# - 1 click -> command 1
|
||||
# - 2 clicks -> command 2
|
||||
# - 3 clicks -> command 3
|
||||
# - Relay 1 turn_on action also turns ON Relay_2 and Relay_3
|
||||
# - Virtual group switch "All Main Bathroom Lights" allows grouped control in Home Assistant
|
||||
#:########################################################################################:#
|
||||
# MQTT COMMANDS:
|
||||
# - Remote device command topic:
|
||||
# - ${mqtt_remote_device1_command_topic}
|
||||
# - Button 3 single click publishes:
|
||||
# - ${mqtt_remote_device1_command1}
|
||||
# - Button 3 double click publishes:
|
||||
# - ${mqtt_remote_device1_command2}
|
||||
# - Button 3 triple click publishes:
|
||||
# - ${mqtt_remote_device1_command3}
|
||||
#:########################################################################################:#
|
||||
# OFFLINE NOTES:
|
||||
# a) Home Assistant offline (network and MQTT online):
|
||||
# - Local button control continues to operate the relays.
|
||||
# - Button 3 MQTT fan commands can still publish if MQTT broker is online.
|
||||
# - Virtual group switch in HA will be unavailable until HA returns.
|
||||
# b) MQTT offline (or HA/MQTT offline):
|
||||
# - Local button control continues to operate the relays.
|
||||
# - Button 3 fan MQTT commands will not be sent.
|
||||
# c) Entire WiFi/Network offline:
|
||||
# - Local button control continues to operate the relays.
|
||||
# - No MQTT control or status is available.
|
||||
# - Accurate time is not needed; SNTP is not required for operation.
|
||||
#:########################################################################################:#
|
||||
|
||||
##########################################################################################
|
||||
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
|
||||
#:########################################################################################:#
|
||||
# SUBSTITUTIONS: Specific device variable substitutions
|
||||
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
substitutions:
|
||||
# Device Naming
|
||||
device_name: "esp-mainbathroomlights"
|
||||
friendly_name: "Main Bathroom Lightswitch (3)"
|
||||
description_comment: "BK7231N - Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3)"
|
||||
description_comment: "BK7231N - Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3) (Layout V1.1)"
|
||||
device_area: "Main Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.
|
||||
|
||||
# Project Naming
|
||||
project_name: "Zemismart Technologies.KS-811 Triple BK7231N" # Project Details
|
||||
project_version: "v2.1" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
project_version: "v2.2" # Project V denotes release of yaml file, allowing checking of deployed vs latest version
|
||||
|
||||
# Passwords
|
||||
api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
|
||||
ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
|
||||
static_ip_address: !secret esp-garageentrylights2_ip
|
||||
static_ip_address: !secret esp-mainbathroomlights_ip
|
||||
mqtt_command_main_topic: !secret mqtt_command_main_topic
|
||||
#mqtt_status_main_topic: !secret mqtt_status_main_topic
|
||||
|
||||
@@ -65,10 +108,10 @@ substitutions:
|
||||
mqtt_remote_device1_command2: "20"
|
||||
mqtt_remote_device1_command3: "30"
|
||||
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# PACKAGES: Included Common Packages
|
||||
# https://esphome.io/components/packages.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
packages:
|
||||
#### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
|
||||
common_wifi: !include
|
||||
@@ -94,28 +137,31 @@ packages:
|
||||
|
||||
#### WEB PORTAL ####
|
||||
#common_webportal: !include common/webportal_common.yaml
|
||||
|
||||
#### SNTP (Only use if you want/need accurate timeclocks) ####
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
#common_sntp: !include common/sntp_common.yaml
|
||||
|
||||
#### DIAGNOSTICS Sensors ####
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
#diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
diag_basic: !include common/include_basic_diag_sensors.yaml
|
||||
#diag_more: !include common/include_more_diag_sensors.yaml
|
||||
#diag_debug: !include common/include_debug_diag_sensors.yaml
|
||||
#diag_resetcount: !include common/include_resetcount_diag_sensors.yaml
|
||||
|
||||
# Package item removals
|
||||
#:########################################################################################:#
|
||||
# PACKAGE ITEM REMOVALS / OVERRIDES:
|
||||
#:########################################################################################:#
|
||||
wifi:
|
||||
min_auth_mode: !remove # The WPA2 only works on esp32/8266
|
||||
reboot_timeout: 15min # override the selection from from the common package
|
||||
fast_connect: false # (optional) force off, in case package vars change
|
||||
reboot_timeout: 15min # override the selection from the common package
|
||||
fast_connect: false # optional; force off in case package vars change
|
||||
|
||||
mqtt:
|
||||
keepalive: 15s # overriding the value from the common package
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome
|
||||
#:########################################################################################:#
|
||||
# ESPHOME:
|
||||
# https://esphome.io/components/esphome.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
esphome:
|
||||
name: "${device_name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
@@ -129,36 +175,36 @@ esphome:
|
||||
# then:
|
||||
# - switch.turn_on: Relay_3
|
||||
|
||||
##########################################################################################
|
||||
# BUILD FOR BK CHIPSET
|
||||
#:########################################################################################:#
|
||||
# BUILD FOR BK CHIPSET:
|
||||
# bk72xx
|
||||
# https://devices.esphome.io/board/bk72xx/
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
bk72xx:
|
||||
board: generic-bk7231n-qfn32-tuya
|
||||
|
||||
##########################################################################################
|
||||
# ESPHome Logging Enable
|
||||
#:########################################################################################:#
|
||||
# LOGGER:
|
||||
# https://esphome.io/components/logger.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
logger:
|
||||
level: "${log_level}" #INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
level: "${log_level}" # INFO Level suggested, or DEBUG for testing
|
||||
baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
|
||||
id: logger_id
|
||||
|
||||
##########################################################################################
|
||||
# STATUS LED
|
||||
#:########################################################################################:#
|
||||
# STATUS LED:
|
||||
# https://esphome.io/components/status_led.html
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
status_led:
|
||||
pin:
|
||||
number: P22 #GPIO22
|
||||
inverted: true
|
||||
|
||||
##########################################################################################
|
||||
# BINARY SENSORS
|
||||
#:########################################################################################:#
|
||||
# BINARY SENSORS:
|
||||
# https://esphome.io/components/binary_sensor/
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
@@ -235,10 +281,10 @@ binary_sensor:
|
||||
topic: "${mqtt_remote_device1_command_topic}"
|
||||
payload: "${mqtt_remote_device1_command3}"
|
||||
|
||||
##########################################################################################
|
||||
# SWITCH COMPONENT
|
||||
#:########################################################################################:#
|
||||
# SWITCH COMPONENT:
|
||||
# https://esphome.io/components/switch/
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Relay 1: ${switch_1_name}"
|
||||
@@ -261,10 +307,10 @@ switch:
|
||||
id: Relay_3
|
||||
restore_mode: ${relay_restore_mode}
|
||||
|
||||
##########################################################################################
|
||||
# TEMPLATE COMPONENT
|
||||
##########################################################################################
|
||||
#:########################################################################################:#
|
||||
# TEMPLATE COMPONENT:
|
||||
# Virtual group switch for Home Assistant
|
||||
#:########################################################################################:#
|
||||
- platform: template
|
||||
name: "All Main Bathroom Lights"
|
||||
id: all_main_bathroom_lights
|
||||
|
||||
Reference in New Issue
Block a user