package updates

Edit esp-astroclockstepper1.yaml
2026-06-24 22:19:31 +12:00 · 2026-06-22 22:48:14 +12:00
5 changed files with 326 additions and 96 deletions
@@ -1 +1 @@
-{"pid": 71, "version": 1, "ha_version": "2026.6.4", "start_ts": 1781925486.5362422}
+{"pid": 71, "version": 1, "ha_version": "2026.6.4", "start_ts": 1782291758.7869737}
@@ -309,20 +309,20 @@
  },
  "_firmware_jobs": [
    {
-      "job_id": "18e167c90e84",
+      "job_id": "a9d399c75a3c",
      "configuration": "esp-astroclockstepper1.yaml",
-      "job_type": "compile",
+      "job_type": "upload",
      "status": "completed",
-      "created_at": "2026-06-22T10:39:50.725643+00:00",
-      "started_at": "2026-06-22T10:39:50.726018+00:00",
-      "completed_at": "2026-06-22T10:40:00.987922+00:00",
+      "created_at": "2026-06-23T22:39:02.997026+00:00",
+      "started_at": "2026-06-23T22:39:13.550158+00:00",
+      "completed_at": "2026-06-23T22:39:22.381405+00:00",
      "exit_code": 0,
      "error": null,
-      "port": "",
+      "port": "OTA",
      "new_name": "",
-      "depends_on": "",
-      "dependency_released": false,
-      "progress": null,
+      "depends_on": "62da0bea3769",
+      "dependency_released": true,
+      "progress": 100,
      "remote_peer": "",
      "remote_job_id": "",
      "remote_peer_label": "",
@@ -334,20 +334,20 @@
      "source_esphome_version": ""
    },
    {
-      "job_id": "1a468db814e3",
+      "job_id": "62da0bea3769",
      "configuration": "esp-astroclockstepper1.yaml",
-      "job_type": "upload",
+      "job_type": "compile",
      "status": "completed",
-      "created_at": "2026-06-22T03:29:56.540327+00:00",
-      "started_at": "2026-06-22T03:30:10.489873+00:00",
-      "completed_at": "2026-06-22T03:30:21.965677+00:00",
+      "created_at": "2026-06-23T22:39:02.996971+00:00",
+      "started_at": "2026-06-23T22:39:02.998359+00:00",
+      "completed_at": "2026-06-23T22:39:13.547225+00:00",
      "exit_code": 0,
      "error": null,
-      "port": "OTA",
+      "port": "",
      "new_name": "",
-      "depends_on": "46b32677aa36",
-      "dependency_released": true,
-      "progress": 100,
+      "depends_on": "",
+      "dependency_released": false,
+      "progress": null,
      "remote_peer": "",
      "remote_job_id": "",
      "remote_peer_label": "",
@@ -91,11 +91,11 @@ substitutions:
  current_ip_address: ${static_ip_address}

  # MQTT Topics
-  mqtt_command_main_topic: !secret mqtt_command_main_topic
-  mqtt_status_main_topic: !secret mqtt_status_main_topic
-  mqtt_device_name: "astro-clock-stepper1"
-  mqtt_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}"
-  mqtt_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}"
+  #mqtt_command_main_topic: !secret mqtt_command_main_topic
+  #mqtt_status_main_topic: !secret mqtt_status_main_topic
+  #mqtt_device_name: "astro-clock-stepper1"
+  #mqtt_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}"
+  #mqtt_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}"

  # Device Settings
  log_level: "INFO"
@@ -171,10 +171,10 @@ packages:
      local_api_key: "${api_key}"

  #### MQTT ####
-  common_mqtt: !include
-    file: common/mqtt_common.yaml
-    vars:
-      local_device_name: "${device_name}"
+  #common_mqtt: !include
+  #  file: common/mqtt_common.yaml
+  #  vars:
+  #    local_device_name: "${device_name}"

  #### WEB PORTAL ####
  #common_webportal: !include common/webportal_common.yaml
@@ -185,7 +185,7 @@ packages:

  #### DIAGNOSTICS Sensors ####
  diag_basic: !include common/include_basic_diag_sensors.yaml
-  diag_more: !include common/include_more_diag_sensors.yaml
+  #diag_more: !include common/include_more_diag_sensors.yaml
  #diag_debug: !include common/include_debug_diag_sensors.yaml
  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml

@@ -359,7 +359,7 @@ output:
    id: stepper_in4
    pin: ${stepper_in4_pin}

-  # D1 Mini onboard LED is usually GPIO2 / D4 and active-low
+  # D1 Mini onboard LED GPIO2 / D4 and active-low
  - platform: gpio
    id: onboard_step_led
    pin:
@@ -824,44 +824,44 @@ interval:
 # Device-specific MQTT command triggers, in addition to common MQTT config
 # https://esphome.io/components/mqtt.html
 #:########################################################################################:#
-mqtt:
-  on_message:
-    - topic: "${mqtt_command_topic}/fast_forward/set"
-      payload: "ON"
-      then:
-        - switch.turn_on: web_fast_forward_switch
-
-    - topic: "${mqtt_command_topic}/fast_forward/set"
-      payload: "OFF"
-      then:
-        - switch.turn_off: web_fast_forward_switch
-
-    - topic: "${mqtt_command_topic}/slow_forward/set"
-      payload: "ON"
-      then:
-        - switch.turn_on: web_slow_forward_switch
-
-    - topic: "${mqtt_command_topic}/slow_forward/set"
-      payload: "OFF"
-      then:
-        - switch.turn_off: web_slow_forward_switch
-
-    - topic: "${mqtt_command_topic}/fast_reverse/set"
-      payload: "ON"
-      then:
-        - switch.turn_on: web_fast_reverse_switch
-
-    - topic: "${mqtt_command_topic}/fast_reverse/set"
-      payload: "OFF"
-      then:
-        - switch.turn_off: web_fast_reverse_switch
-
-    - topic: "${mqtt_command_topic}/slow_reverse/set"
-      payload: "ON"
-      then:
-        - switch.turn_on: web_slow_reverse_switch
-
-    - topic: "${mqtt_command_topic}/slow_reverse/set"
-      payload: "OFF"
-      then:
-        - switch.turn_off: web_slow_reverse_switch
+#mqtt:
+#  on_message:
+#    - topic: "${mqtt_command_topic}/fast_forward/set"
+#      payload: "ON"
+#      then:
+#        - switch.turn_on: web_fast_forward_switch
+#
+#    - topic: "${mqtt_command_topic}/fast_forward/set"
+#      payload: "OFF"
+#      then:
+#        - switch.turn_off: web_fast_forward_switch
+#
+#    - topic: "${mqtt_command_topic}/slow_forward/set"
+#      payload: "ON"
+#      then:
+#        - switch.turn_on: web_slow_forward_switch
+#
+#    - topic: "${mqtt_command_topic}/slow_forward/set"
+#      payload: "OFF"
+#      then:
+#        - switch.turn_off: web_slow_forward_switch
+#
+#    - topic: "${mqtt_command_topic}/fast_reverse/set"
+#      payload: "ON"
+#      then:
+#        - switch.turn_on: web_fast_reverse_switch
+#
+#    - topic: "${mqtt_command_topic}/fast_reverse/set"
+#      payload: "OFF"
+#      then:
+#        - switch.turn_off: web_fast_reverse_switch
+#
+#    - topic: "${mqtt_command_topic}/slow_reverse/set"
+#      payload: "ON"
+#      then:
+#        - switch.turn_on: web_slow_reverse_switch
+#
+#    - topic: "${mqtt_command_topic}/slow_reverse/set"
+#      payload: "OFF"
+#      then:
+#        - switch.turn_off: web_slow_reverse_switch
@@ -1,7 +1,14 @@
-###############################################################################
-# PACKAGE: Free Power Time Automation
-###############################################################################
+#:########################################################################################:#
+# PACKAGE: Free Power Time Automation                                                     #
+#:########################################################################################:#
 # VERSION:
+#   1.1.0 - 2026-06-24
+#     - Changed gas-to-heatpump handover so the heat pump setpoint is offset from
+#       the gas heater setpoint.
+#     - Default heat pump offset is now -5 degrees C.
+#     - The offset remains YAML-only and can be changed inside
+#       script.free_power_gas_heater_changeover.
+#
 #   1.0.0 - 2026-05-08
 #     - Initial package.
 #     - Adds editable free power start/end times.
@@ -21,11 +28,11 @@
 #   - input_datetime initial values are used to provide defaults.
 #   - If you later want UI changes to survive every HA restart, remove the
 #     initial lines after the helpers have been created and set once.
-###############################################################################
+#:########################################################################################:#

-###############################################################################
-# INPUT DATETIME
-###############################################################################
+#:########################################################################################:#
+# INPUT DATETIME                                                                          #
+#:########################################################################################:#

 input_datetime:
  free_power_start_time:
@@ -42,9 +49,9 @@ input_datetime:
    initial: "00:00:00"
    icon: mdi:clock-end

-###############################################################################
-# ENABLE SWITCHES
-###############################################################################
+#:########################################################################################:#
+# ENABLE SWITCHES                                                                         #
+#:########################################################################################:#

 input_boolean:
  free_power_automation_enabled:
@@ -67,9 +74,9 @@ input_boolean:
    name: Free Power - Underhouse Dehumidifier Enable
    icon: mdi:air-humidifier

-###############################################################################
-# TEMPLATE SENSORS
-###############################################################################
+#:########################################################################################:#
+# TEMPLATE SENSORS                                                                        #
+#:########################################################################################:#

 template:
  - binary_sensor:
@@ -91,9 +98,9 @@ template:
            {{ now_mins >= start_mins or now_mins < end_mins }}
          {% endif %}

-###############################################################################
-# SCRIPTS
-###############################################################################
+#:########################################################################################:#
+# SCRIPTS                                                                                 #
+#:########################################################################################:#

 script:
  free_power_start_actions:
@@ -219,6 +226,17 @@ script:
    sequence:
      ###########################################################################
      # YAML-only settings
+      #
+      # heatpump_setpoint_offset_c:
+      #   This is added to the current gas heater setpoint.
+      #
+      #   Example:
+      #     Gas heater setpoint:       22
+      #     heatpump_setpoint_offset:  -5
+      #     Heat pump setpoint:        17
+      #
+      #   To make the heat pump only 4 degrees lower, change this to -4.
+      #   To match the gas heater setpoint exactly, change this to 0.
      ###########################################################################

      - variables:
@@ -227,7 +245,7 @@ script:
          heatpump_climate_entity: climate.lounge

          gas_heater_shutdown_delay_seconds: 60
-          heatpump_setpoint_offset_c: 0
+          heatpump_setpoint_offset_c: -5

          heatpump_setpoint: >-
            {{
@@ -253,13 +271,16 @@ script:
          {{ states(gas_heater_setpoint_entity) not in ['unknown', 'unavailable', 'none', 'None', ''] }}

      ###########################################################################
-      # Set the Panasonic heatpump to heat mode and match the gas heater setpoint,
-      # with the YAML-only offset applied.
+      # Set the Panasonic heat pump to heat mode.
+      #
+      # The target temperature is the gas heater setpoint plus the YAML-only
+      # offset above. With the default offset of -5, a gas heater setpoint of
+      # 22 degrees will set the heat pump to 17 degrees.
      ###########################################################################

      - action: climate.set_temperature
        target:
-          entity_id: climate.lounge
+          entity_id: "{{ heatpump_climate_entity }}"
        data:
          hvac_mode: heat
          temperature: "{{ heatpump_setpoint }}"
@@ -273,11 +294,11 @@ script:

      - action: switch.turn_off
        target:
-          entity_id: switch.rinnai_neo_gas_heater_heater_operation
+          entity_id: "{{ gas_heater_operation_entity }}"

-###############################################################################
-# AUTOMATIONS
-###############################################################################
+#:########################################################################################:#
+# AUTOMATIONS                                                                             #
+#:########################################################################################:#

 automation:
  - id: free_power_time_start_actions
@@ -0,0 +1,209 @@
+#:########################################################################################:#
+# Master Bedroom 4 Button Scene Switches                                                  #
+#:########################################################################################:#
+#
+# TITLE:
+#   Master Bedroom 4 Button Scene Switches
+#
+# FILE:
+#   master_bedroom_4_button_scene_switches.yaml
+#
+# VERSION:
+#   V1.0 2026-06-24
+#
+# VERSION HISTORY:
+#   V1.0 2026-06-24
+#     - Initial package.
+#     - Added West and East Moes TS004F 4-button Zigbee2MQTT scene switches.
+#     - Uses Zigbee2MQTT MQTT action payloads directly.
+#
+# PURPOSE:
+#   Controls Master Bedroom lighting from two Zigbee2MQTT Moes 4-button scene
+#   switches.
+#
+# NOTES:
+#   Zigbee2MQTT action payloads used:
+#     - 1_single = Top left
+#     - 2_single = Top right
+#     - 3_single = Bottom left
+#     - 4_single = Bottom right
+#
+#   West switch:
+#     - Top left     = Main Bedroom South Lights ON
+#     - Top right    = Bedside Light ON
+#     - Bottom left  = Main Bedroom South Lights OFF + Main Bedroom North Lights OFF
+#     - Bottom right = Bedside Light OFF
+#
+#   East switch:
+#     - Top left     = Bedside Light ON
+#     - Top right    = Main Bedroom South Lights ON
+#     - Bottom left  = Bedside Light OFF
+#     - Bottom right = Main Bedroom South Lights OFF + Main Bedroom North Lights OFF
+#
+#:########################################################################################:#
+
+#:########################################################################################:#
+# AUTOMATIONS                                                                              #
+#:########################################################################################:#
+
+automation:
+  - id: master_bedroom_4_button_scene_switches
+    alias: "Master Bedroom - 4 Button Scene Switches"
+    description: "Controls Master Bedroom lights from East and West Moes 4-button Zigbee2MQTT scene switches."
+    mode: queued
+    max: 10
+
+    variables:
+      west_switch_mqtt_topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+      east_switch_mqtt_topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+
+      bedside_light: "switch.master_bedroom_bedside_lamp_arlec_bulb_master_bedroom_bedside_lamp_arlec_bulb_jump_fade_up_down"
+      main_bedroom_south_lights: "switch.master_bedroom_master_bedroom_main_lights_south_relay_2_master_bedroom_south_lights"
+      main_bedroom_north_lights: "light.tasmo_ifan02_3793_bedrm1_1"
+
+    triggers:
+      # West switch actions
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "1_single"
+        id: west_top_left
+
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "2_single"
+        id: west_top_right
+
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "3_single"
+        id: west_bottom_left
+
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "4_single"
+        id: west_bottom_right
+
+      # East switch actions
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "1_single"
+        id: east_top_left
+
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "2_single"
+        id: east_top_right
+
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "3_single"
+        id: east_bottom_left
+
+      - trigger: mqtt
+        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        value_template: "{{ value_json.action | default('') }}"
+        payload: "4_single"
+        id: east_bottom_right
+
+    actions:
+      - choose:
+          #:##############################################################################:#
+          # West Switch                                                                    #
+          #:##############################################################################:#
+
+          # West top left:
+          # Main Bedroom South Lights ON
+          - conditions:
+              - condition: trigger
+                id: west_top_left
+            sequence:
+              - action: homeassistant.turn_on
+                target:
+                  entity_id: "{{ main_bedroom_south_lights }}"
+
+          # West top right:
+          # Bedside Light ON
+          - conditions:
+              - condition: trigger
+                id: west_top_right
+            sequence:
+              - action: homeassistant.turn_on
+                target:
+                  entity_id: "{{ bedside_light }}"
+
+          # West bottom left:
+          # Main Bedroom South Lights OFF
+          # Main Bedroom North Lights OFF
+          - conditions:
+              - condition: trigger
+                id: west_bottom_left
+            sequence:
+              - action: homeassistant.turn_off
+                target:
+                  entity_id:
+                    - "{{ main_bedroom_south_lights }}"
+                    - "{{ main_bedroom_north_lights }}"
+
+          # West bottom right:
+          # Bedside Light OFF
+          - conditions:
+              - condition: trigger
+                id: west_bottom_right
+            sequence:
+              - action: homeassistant.turn_off
+                target:
+                  entity_id: "{{ bedside_light }}"
+
+          #:##############################################################################:#
+          # East Switch                                                                    #
+          #:##############################################################################:#
+
+          # East top left:
+          # Bedside Light ON
+          - conditions:
+              - condition: trigger
+                id: east_top_left
+            sequence:
+              - action: homeassistant.turn_on
+                target:
+                  entity_id: "{{ bedside_light }}"
+
+          # East top right:
+          # Main Bedroom South Lights ON
+          - conditions:
+              - condition: trigger
+                id: east_top_right
+            sequence:
+              - action: homeassistant.turn_on
+                target:
+                  entity_id: "{{ main_bedroom_south_lights }}"
+
+          # East bottom left:
+          # Bedside Light OFF
+          - conditions:
+              - condition: trigger
+                id: east_bottom_left
+            sequence:
+              - action: homeassistant.turn_off
+                target:
+                  entity_id: "{{ bedside_light }}"
+
+          # East bottom right:
+          # Main Bedroom South Lights OFF
+          # Main Bedroom North Lights OFF
+          - conditions:
+              - condition: trigger
+                id: east_bottom_right
+            sequence:
+              - action: homeassistant.turn_off
+                target:
+                  entity_id:
+                    - "{{ main_bedroom_south_lights }}"
+                    - "{{ main_bedroom_north_lights }}"
Author	SHA1	Message	Date
zorruno	682e6f617e	package updates	2026-06-24 22:19:31 +12:00
ESPHome Device Builder	7b45088685	Edit esp-astroclockstepper1.yaml	2026-06-22 22:48:14 +12:00