various tidyups

Edit esp-officeduallights.yaml
2026-09-13 15:32:16 +12:00 · 2026-09-13 11:19:34 +12:00 · 2026-09-13 11:18:37 +12:00 · 2026-09-13 11:18:12 +12:00 · 2026-09-04 17:09:47 +12:00
37 changed files with 3491 additions and 2386 deletions
@@ -1 +1 @@
-{"pid": 71, "version": 1, "ha_version": "2026.8.3", "start_ts": 1788051080.3314128}
+{"pid": 71, "version": 1, "ha_version": "2026.9.2", "start_ts": 1789211351.1286738}
@@ -0,0 +1,67 @@
+TP-Link Deco Guest Wi-Fi Recovery Archive
+==========================================
+
+Version: 1.0.0
+Created: 2026-09-02
+Project: P026 Flounder downstairs guest-area controls
+
+Purpose
+-------
+
+This archive preserves the locally maintained TP-Link Deco Guest Wi-Fi
+customisation. The upstream tplink_deco integration does not provide this
+service or sensor. Reinstalling or overwriting custom_components/tplink_deco
+can remove them.
+
+Archive
+-------
+
+File: docs/tplink_deco_guest_wifi_recovery_2026-09-02.tgz
+SHA-256: 452ed7b7be5e8c469dc7740d5297959179204d24593a22c965f1915ca727c48d
+
+Contents
+--------
+
+- custom_components/tplink_deco/api.py
+- custom_components/tplink_deco/__init__.py
+- custom_components/tplink_deco/const.py
+- custom_components/tplink_deco/services.yaml
+- custom_components/tplink_deco/coordinator.py
+- custom_components/tplink_deco/binary_sensor.py
+- packages/tplink_deco_guest_wifi.yaml
+
+Behaviour Preserved
+-------------------
+
+- Service: tplink_deco.set_guest_network
+- Service field: enable (boolean)
+- Router state: binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network
+- Requested state: input_boolean.wifi_guest_network
+- Flounder control: the requested-state helper; the package reconciles it to
+  the router-confirmed sensor.
+- Write protocol: read each returned wireless band, retain its host, guest and
+  backhaul settings, set only guest.enable, add radio.channel from host.channel,
+  write each band separately, then read back and verify every written band.
+- Deco firmware can return a malformed successful response containing
+  {"error_code": 0}; the integration accepts that response only for writes and
+  relies on the read-back verification as the final confirmation.
+
+Recovery Procedure
+------------------
+
+1. Stop before updating, reinstalling, or deleting custom_components/tplink_deco.
+2. Verify the archive checksum above.
+3. Extract the archive from /homeassistant, preserving the listed paths.
+4. Run Home Assistant configuration validation and Python compilation for the
+   restored integration files.
+5. Restart Home Assistant. A restart is required for custom integration code.
+6. Confirm tplink_deco.set_guest_network is registered and the Guest Network
+   binary sensor is available before operating Guest Wi-Fi.
+
+Update Policy
+-------------
+
+Do not replace custom_components/tplink_deco with an upstream or HACS update
+without first comparing it to this archive and deliberately reapplying the
+Guest Wi-Fi customisation. The archive contains no credentials, tokens, session
+cookies, or router address.
@@ -6,6 +6,7 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedside-panel.yaml
 #:########################################################################################:#
 # VERSIONS:
+# V1.56 2026-09-04 Added latched blackout after 10 seconds below 1 lx with immediate exit
 # V1.55 2026-08-16 Show only Clock time and date in Blackout ambient-light mode
 # V1.54 2026-08-16 Dimmed Clock time and date palette in Blackout ambient-light mode
 # V1.53 2026-07-31 Expanded Jobs Summary to nine active jobs in a 3x4 grid with three spare slots
@@ -248,7 +249,6 @@ substitutions:
  #   Bright light: approximately 642-643 lx
  ambient_lux_multiplier_default: "200"

-  display_blackout_lux_threshold_default: "2"
  display_dark_lux_threshold_default: "20"
  display_bright_lux_threshold_default: "250"

@@ -921,20 +921,6 @@ number:
    step: 5
    mode: box

-  - platform: template
-    id: display_blackout_lux_threshold
-    name: "${friendly_name} Blackout Lux Threshold"
-    icon: mdi:brightness-1
-    entity_category: config
-    optimistic: true
-    restore_value: true
-    initial_value: "${display_blackout_lux_threshold_default}"
-    unit_of_measurement: "lx"
-    min_value: 0
-    max_value: 20
-    step: 0.5
-    mode: box
-
  - platform: template
    id: display_dark_lux_threshold
    name: "${friendly_name} Dark Lux Threshold"
@@ -1241,6 +1227,36 @@ sensor:
      }

      return voltage * multiplier;
+    on_value:
+      then:
+        - if:
+            condition:
+              lambda: |-
+                return !isnan(x) && x >= 1.0f;
+            then:
+              - script.stop: latch_display_blackout
+              - lambda: |-
+                  id(display_blackout_active) = false;
+              - if:
+                  condition:
+                    lambda: |-
+                      return id(lvgl_ready) && id(display_is_dimmed);
+                  then:
+                    - script.execute: apply_dim_backlight
+                  else:
+                    - if:
+                        condition:
+                          lambda: |-
+                            return id(lvgl_ready);
+                        then:
+                          - script.execute: apply_active_backlight
+            else:
+              - if:
+                  condition:
+                    lambda: |-
+                      return !isnan(x) && x < 1.0f && !id(display_blackout_active);
+                  then:
+                    - script.execute: latch_display_blackout

  - platform: homeassistant
    id: moon_phase
@@ -1918,6 +1934,12 @@ globals:
    restore_value: false
    initial_value: "false"

+  # True after ambient light remains below 1 lx for 10 continuous seconds.
+  - id: display_blackout_active
+    type: bool
+    restore_value: false
+    initial_value: "false"
+
  # True only while the Security page is visible.
  - id: security_page_active
    type: bool
@@ -3142,6 +3164,32 @@ script:
  # The active and clock/idle brightness levels are independently adjustable
  # and restored after reboot.

+  - id: latch_display_blackout
+    mode: single
+    then:
+      - delay: 10s
+      - if:
+          condition:
+            lambda: |-
+              const float lux = id(ambient_light_illuminance).state;
+              return !isnan(lux) && lux < 1.0f;
+          then:
+            - lambda: |-
+                id(display_blackout_active) = true;
+            - if:
+                condition:
+                  lambda: |-
+                    return id(lvgl_ready) && id(display_is_dimmed);
+                then:
+                  - script.execute: apply_dim_backlight
+                else:
+                  - if:
+                      condition:
+                        lambda: |-
+                          return id(lvgl_ready);
+                      then:
+                        - script.execute: apply_active_backlight
+
  # Keep the idle Clock unobtrusive at the minimum usable backlight level.
  - id: apply_clock_blackout_palette
    mode: restart
@@ -3149,15 +3197,7 @@ script:
      - if:
          condition:
            lambda: |-
-              const float lux = id(ambient_light_illuminance).state;
-              float blackout_threshold =
-                id(display_blackout_lux_threshold).state;
-
-              if (isnan(blackout_threshold)) {
-                blackout_threshold = 2.0f;
-              }
-
-              return !isnan(lux) && lux < blackout_threshold;
+              return id(display_blackout_active);

          then:
            - lvgl.label.update:
@@ -3212,20 +3252,14 @@ script:
          brightness: !lambda |-
            const float lux = id(ambient_light_illuminance).state;

-            float blackout_threshold =
-              id(display_blackout_lux_threshold).state;
            float dark_threshold =
              id(display_dark_lux_threshold).state;
            float bright_threshold =
              id(display_bright_lux_threshold).state;

-            if (isnan(blackout_threshold)) {
-              blackout_threshold = 2.0f;
-            }
-
            if (
              isnan(dark_threshold) ||
-              dark_threshold <= blackout_threshold
+              dark_threshold <= 0.0f
            ) {
              dark_threshold = 20.0f;
            }
@@ -3239,7 +3273,7 @@ script:

            float brightness_percent;

-            if (!isnan(lux) && lux < blackout_threshold) {
+            if (id(display_blackout_active)) {
              brightness_percent =
                id(display_blackout_brightness).state;
              id(ambient_light_band_text).publish_state("Blackout");
@@ -3280,20 +3314,14 @@ script:
          brightness: !lambda |-
            const float lux = id(ambient_light_illuminance).state;

-            float blackout_threshold =
-              id(display_blackout_lux_threshold).state;
            float dark_threshold =
              id(display_dark_lux_threshold).state;
            float bright_threshold =
              id(display_bright_lux_threshold).state;

-            if (isnan(blackout_threshold)) {
-              blackout_threshold = 2.0f;
-            }
-
            if (
              isnan(dark_threshold) ||
-              dark_threshold <= blackout_threshold
+              dark_threshold <= 0.0f
            ) {
              dark_threshold = 20.0f;
            }
@@ -3307,7 +3335,7 @@ script:

            float brightness_percent;

-            if (!isnan(lux) && lux < blackout_threshold) {
+            if (id(display_blackout_active)) {
              brightness_percent =
                id(display_blackout_brightness).state;
              id(ambient_light_band_text).publish_state("Blackout");
@@ -6,6 +6,8 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officeduallights.yaml
 #:########################################################################################:#
 # VERSIONS:
+# V3.0 2026-09-12 Makes HA the primary Office synchronizer. Direct MQTT peer synchronization
+#                 runs only while HA's native API state subscription is disconnected.
 # V2.9 2026-08-16 Makes this physical relay the sole overhead status authority. Removes the
 #                 bidirectional shared retained-status topic that could chatter during reconnects.
 # V2.8 2026-07-25 Added 2-way MQTT sync with esp-officelights (office main lightswitch).
@@ -93,7 +95,7 @@ substitutions:

  # Project Naming
  project_name: "Sonoff Technologies.Sonoff Dual R1"
-  project_version: "v2.9"
+  project_version: "v3.0"

  # Passwords and Secrets
  api_key: !secret esp-api_key
@@ -239,13 +241,21 @@ mqtt:
      payload: "On"
      then:
        - script.stop: relay_1_timer_script
-        - light.turn_on: light_1
+        - if:
+            condition:
+              lambda: "return !id(relay_1).state;"
+            then:
+              - light.turn_on: light_1

    - topic: "${mqtt_local_command1_topic}"
      payload: "Off"
      then:
        - script.stop: relay_1_timer_script
-        - light.turn_off: light_1
+        - if:
+            condition:
+              lambda: "return id(relay_1).state;"
+            then:
+              - light.turn_off: light_1

    - topic: "${mqtt_local_command1_topic}"
      then:
@@ -277,13 +287,21 @@ mqtt:
      payload: "On"
      then:
        - script.stop: relay_2_timer_script
-        - light.turn_on: light_2
+        - if:
+            condition:
+              lambda: "return !id(relay_2).state;"
+            then:
+              - light.turn_on: light_2

    - topic: "${mqtt_local_command2_topic}"
      payload: "Off"
      then:
        - script.stop: relay_2_timer_script
-        - light.turn_off: light_2
+        - if:
+            condition:
+              lambda: "return id(relay_2).state;"
+            then:
+              - light.turn_off: light_2

    - topic: "${mqtt_local_command2_topic}"
      then:
@@ -311,16 +329,19 @@ mqtt:

            id(relay_2_timer_script)->execute(timer_seconds * 1000);

-    # Mirror remote bunker command from esp-officelights onto light_1, but only if a real
-    # state change is needed. Do not republish the command from here. Relay status is
-    # published by the relay callback below.
+    # MQTT peer synchronization is the HA-down fallback. When HA is connected it is the
+    # sole synchronizer, so remote MQTT commands must not change either physical relay.
    - topic: "${mqtt_mainlight_command_bunker}"
      payload: "${mqtt_command_on}"
      then:
        - script.stop: relay_1_timer_script
        - if:
            condition:
-              lambda: "return !id(relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(relay_1).state;"
            then:
              - light.turn_on: light_1

@@ -330,19 +351,25 @@ mqtt:
        - script.stop: relay_1_timer_script
        - if:
            condition:
-              lambda: "return id(relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(relay_1).state;"
            then:
              - light.turn_off: light_1

-    # Mirror remote overhead command from esp-officelights onto light_2, but only if a real
-    # state change is needed.
    - topic: "${mqtt_mainlight_command_overhead}"
      payload: "${mqtt_command_on}"
      then:
        - script.stop: relay_2_timer_script
        - if:
            condition:
-              lambda: "return !id(relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(relay_2).state;"
            then:
              - light.turn_on: light_2

@@ -352,7 +379,11 @@ mqtt:
        - script.stop: relay_2_timer_script
        - if:
            condition:
-              lambda: "return id(relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(relay_2).state;"
            then:
              - light.turn_off: light_2

@@ -6,6 +6,8 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officelights.yaml
 #:########################################################################################:#
 # VERSIONS:
+# v3.2 2026-09-12 Makes HA the primary Office synchronizer. Direct MQTT peer synchronization
+#                 runs only while HA's native API state subscription is disconnected.
 # v3.1 2026-08-16 Makes the Sonoff Dual the sole overhead status authority. Removes the
 #                 bidirectional shared retained-status topic that could chatter during reconnects.
 # v3.0 2026-07-25 Refactored MQTT sync to use template HA switch actions; physical button and
@@ -81,7 +83,7 @@ substitutions:

  # Project Naming
  project_name: "Zemismart Technologies.KS-811 Triple"
-  project_version: "v3.1"
+  project_version: "v3.2"

  # Passwords & Secrets
  api_key: !secret esp-api_key
@@ -215,15 +217,18 @@ mqtt:
        retain: true

  on_message:
-    # Mirror remote overhead command onto virtual Relay_2, but only if a real state change
-    # is needed. Do not republish the command from here. Relay status is published by the
-    # relay callback below.
+    # MQTT peer synchronization is the HA-down fallback. When HA is connected it is the
+    # sole synchronizer, so remote MQTT state must not change this mirror.
    - topic: "${mqtt_this_device_command_topic_overhead}"
      payload: "${mqtt_command_on}"
      then:
        - if:
            condition:
-              lambda: "return !id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(Relay_2).state;"
            then:
              - switch.turn_on: Relay_2

@@ -232,7 +237,11 @@ mqtt:
      then:
        - if:
            condition:
-              lambda: "return id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(Relay_2).state;"
            then:
              - switch.turn_off: Relay_2

@@ -244,7 +253,11 @@ mqtt:
      then:
        - if:
            condition:
-              lambda: "return !id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(Relay_2).state;"
            then:
              - switch.turn_on: Relay_2

@@ -253,7 +266,11 @@ mqtt:
      then:
        - if:
            condition:
-              lambda: "return id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(Relay_2).state;"
            then:
              - switch.turn_off: Relay_2

@@ -265,7 +282,11 @@ mqtt:
      then:
        - if:
            condition:
-              lambda: "return !id(Relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(Relay_1).state;"
            then:
              - switch.turn_on: Relay_1

@@ -274,7 +295,11 @@ mqtt:
      then:
        - if:
            condition:
-              lambda: "return id(Relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(Relay_1).state;"
            then:
              - switch.turn_off: Relay_1

@@ -341,10 +366,16 @@ script:
            lambda: "return !id(Relay_1).state;"
          then:
            - switch.turn_on: Relay_1
-      - mqtt.publish:
-          topic: "${mqtt_this_device_command_topic_bunker}"
-          payload: "${mqtt_command_on}"
-          retain: false
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic_bunker}"
+                payload: "${mqtt_command_on}"
+                retain: false

  # Local/HA requested OFF for Bunker Lights.
  - id: office_bunker_off
@@ -355,10 +386,16 @@ script:
            lambda: "return id(Relay_1).state;"
          then:
            - switch.turn_off: Relay_1
-      - mqtt.publish:
-          topic: "${mqtt_this_device_command_topic_bunker}"
-          payload: "${mqtt_command_off}"
-          retain: false
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic_bunker}"
+                payload: "${mqtt_command_off}"
+                retain: false

  # Physical Button 1 toggle logic for Bunker Lights. This is the only place that decides
  # ON vs OFF for the bunker.
@@ -383,10 +420,16 @@ script:
            lambda: "return !id(Relay_2).state;"
          then:
            - switch.turn_on: Relay_2
-      - mqtt.publish:
-          topic: "${mqtt_this_device_command_topic_overhead}"
-          payload: "${mqtt_command_on}"
-          retain: false
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic_overhead}"
+                payload: "${mqtt_command_on}"
+                retain: false

  # Local/HA requested OFF for Overhead Lights.
  - id: office_overhead_off
@@ -397,10 +440,16 @@ script:
            lambda: "return id(Relay_2).state;"
          then:
            - switch.turn_off: Relay_2
-      - mqtt.publish:
-          topic: "${mqtt_this_device_command_topic_overhead}"
-          payload: "${mqtt_command_off}"
-          retain: false
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
+            - mqtt.publish:
+                topic: "${mqtt_this_device_command_topic_overhead}"
+                payload: "${mqtt_command_off}"
+                retain: false

  # Physical Button 2 toggle logic for Overhead Lights.
  - id: office_overhead_toggle
@@ -0,0 +1,223 @@
+--- a/esp-bedside-panel.yaml
+++ b/esp-bedside-panel.yaml
+@@ -5,6 +5,7 @@
+ # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedside-panel.yaml
+ #:########################################################################################:#
+ # VERSIONS:
+# V1.56 2026-09-04 Added latched blackout after 10 seconds below 1 lx with immediate exit
+ # V1.55 2026-08-16 Show only Clock time and date in Blackout ambient-light mode
+ # V1.54 2026-08-16 Dimmed Clock time and date palette in Blackout ambient-light mode
+@@ -248,7 +249,6 @@
+ #   Bright light: approximately 642-643 lx
+   ambient_lux_multiplier_default: "200"
+-
+-  display_blackout_lux_threshold_default: "2"
+   display_dark_lux_threshold_default: "20"
+   display_bright_lux_threshold_default: "250"
+@@ -921,21 +921,6 @@
+     step: 5
+     mode: box
+ 
+-  - platform: template
+-    id: display_blackout_lux_threshold
+-    name: "${friendly_name} Blackout Lux Threshold"
+-    icon: mdi:brightness-1
+-    entity_category: config
+-    optimistic: true
+-    restore_value: true
+-    initial_value: "${display_blackout_lux_threshold_default}"
+-    unit_of_measurement: "lx"
+-    min_value: 0
+-    max_value: 20
+-    step: 0.5
+-    mode: box
+-
+   - platform: template
+     id: display_dark_lux_threshold
+@@ -1228,6 +1213,45 @@
+     update_interval: 3s
+     lambda: |-
+       const float voltage = id(ambient_light_voltage).state;
+
+      if (isnan(voltage)) {
+        return NAN;
+      }
+
+      float multiplier = id(ambient_lux_multiplier).state;
+
+      if (isnan(multiplier) || multiplier <= 0.0f) {
+        multiplier = 200.0f;
+      }
+
+      return voltage * multiplier;
+    on_value:
+      then:
+        - if:
+            condition:
+              lambda: |-
+                return !isnan(x) && x >= 1.0f;
+            then:
+              - script.stop: latch_display_blackout
+              - lambda: |-
+                  id(display_blackout_active) = false;
+              - if:
+                  condition:
+                    lambda: |-
+                      return id(lvgl_ready) && id(display_is_dimmed);
+                  then:
+                    - script.execute: apply_dim_backlight
+                  else:
+                    - if:
+                        condition:
+                          lambda: |-
+                            return id(lvgl_ready);
+                        then:
+                          - script.execute: apply_active_backlight
+            else:
+              - if:
+                  condition:
+                    lambda: |-
+                      return !isnan(x) && x < 1.0f && !id(display_blackout_active);
+                  then:
+                    - script.execute: latch_display_blackout
+-      float multiplier = id(ambient_lux_multiplier).state;
+-
+-      if (isnan(voltage)) {
+-        return NAN;
+-      }
+-
+-      if (isnan(multiplier) || multiplier <= 0.0f) {
+-        multiplier = 200.0f;
+-      }
+-
+-      return voltage * multiplier;
+ 
+   - platform: homeassistant
+@@ -1918,6 +1942,12 @@
+     restore_value: false
+     initial_value: "false"
+ 
+  # True after ambient light remains below 1 lx for 10 continuous seconds.
+  - id: display_blackout_active
+    type: bool
+    restore_value: false
+    initial_value: "false"
+
+   # True only while the Security page is visible.
+@@ -3133,31 +3163,52 @@
+-  # Four ambient ranges are used:
+-  #   Blackout: lux < Blackout Lux Threshold
+-  #   Dark:     Blackout threshold to Dark Lux Threshold
+-  #   Normal:   between Dark and Bright thresholds
+-  #   Bright:   lux >= Bright Lux Threshold
+  # Blackout latches after ambient light remains below 1 lx for 10 seconds and
+  # exits immediately when ambient light reaches 1 lx. The remaining ranges are:
+  #   Dark:   lux <= Dark Lux Threshold
+  #   Normal: between Dark and Bright thresholds
+  #   Bright: lux >= Bright Lux Threshold
+   #
+   # The active and clock/idle brightness levels are independently adjustable
+   # and restored after reboot.
+ 
+  - id: latch_display_blackout
+    mode: single
+    then:
+      - delay: 10s
+      - if:
+          condition:
+            lambda: |-
+              const float lux = id(ambient_light_illuminance).state;
+              return !isnan(lux) && lux < 1.0f;
+          then:
+            - lambda: |-
+                id(display_blackout_active) = true;
+            - if:
+                condition:
+                  lambda: |-
+                    return id(lvgl_ready) && id(display_is_dimmed);
+                then:
+                  - script.execute: apply_dim_backlight
+                else:
+                  - if:
+                      condition:
+                        lambda: |-
+                          return id(lvgl_ready);
+                      then:
+                        - script.execute: apply_active_backlight
+
+   # Keep the idle Clock unobtrusive at the minimum usable backlight level.
+   - id: apply_clock_blackout_palette
+@@ -3146,15 +3197,7 @@
+       - if:
+           condition:
+             lambda: |-
+-              const float lux = id(ambient_light_illuminance).state;
+-              float blackout_threshold =
+-                id(display_blackout_lux_threshold).state;
+-
+-              if (isnan(blackout_threshold)) {
+-                blackout_threshold = 2.0f;
+-              }
+-
+-              return !isnan(lux) && lux < blackout_threshold;
+              return id(display_blackout_active);
+@@ -3212,22 +3255,12 @@
+           brightness: !lambda |-
+             const float lux = id(ambient_light_illuminance).state;
+ 
+-            float blackout_threshold =
+-              id(display_blackout_lux_threshold).state;
+             float dark_threshold =
+               id(display_dark_lux_threshold).state;
+             float bright_threshold =
+               id(display_bright_lux_threshold).state;
+ 
+-            if (isnan(blackout_threshold)) {
+-              blackout_threshold = 2.0f;
+-            }
+-
+             if (
+               isnan(dark_threshold) ||
+-              dark_threshold <= blackout_threshold
+              dark_threshold <= 0.0f
+             ) {
+               dark_threshold = 20.0f;
+             }
+@@ -3239,7 +3272,7 @@
+ 
+             float brightness_percent;
+ 
+-            if (!isnan(lux) && lux < blackout_threshold) {
+            if (id(display_blackout_active)) {
+               brightness_percent =
+                 id(display_blackout_brightness).state;
+@@ -3280,22 +3313,12 @@
+           brightness: !lambda |-
+             const float lux = id(ambient_light_illuminance).state;
+ 
+-            float blackout_threshold =
+-              id(display_blackout_lux_threshold).state;
+             float dark_threshold =
+               id(display_dark_lux_threshold).state;
+             float bright_threshold =
+               id(display_bright_lux_threshold).state;
+ 
+-            if (isnan(blackout_threshold)) {
+-              blackout_threshold = 2.0f;
+-            }
+-
+             if (
+               isnan(dark_threshold) ||
+-              dark_threshold <= blackout_threshold
+              dark_threshold <= 0.0f
+             ) {
+               dark_threshold = 20.0f;
+             }
+@@ -3307,7 +3330,7 @@
+ 
+             float brightness_percent;
+ 
+-            if (!isnan(lux) && lux < blackout_threshold) {
+            if (id(display_blackout_active)) {
+               brightness_percent =
+                 id(display_blackout_brightness).state;
@@ -1,26 +1,28 @@
 #:########################################################################################:#
 # PACKAGE: Office Lights Home Assistant Fallback Synchronization
 # FILE:    Lighting_2Way_Sync/office_lights_ha_fallback_sync.yaml
-# VERSION: v1.0.0
-# DATE:    2026-08-16
+# VERSION: v1.2.0
+# DATE:    2026-09-12
 #:########################################################################################:#
 #
 # PURPOSE:
-#   Provides the Home Assistant API transport for Office two-way light control
-#   when MQTT is unavailable. Direct MQTT remains the HA-down transport.
+#   Provides Home Assistant-primary synchronization for the Office two-way
+#   light controls. Direct MQTT peer control is the HA-down transport.
 #
 # OPERATION:
 #   - Synchronizes the Office bunker and overhead control pairs in both directions.
-#   - Uses idempotent Home Assistant actions, so MQTT and HA may both be online
-#     without creating a control loop.
+#   - ESPHome permits direct MQTT peer synchronization only while HA's native
+#     API state subscription is disconnected, preventing competing controllers.
 #   - Does not reconcile state during Home Assistant startup, preventing a stale
 #     restored entity state from changing a physical light.
 #
 # DEPENDENCIES:
 #   - Blueprint: zorruno/two_three_way_sync.yaml
-#   - esp-officelights and esp-officeduallights native ESPHome API connections.
+#   - esp-officelights v3.2 and esp-officeduallights v3.0 or later.
 #
 # VERSION HISTORY:
+#   - v1.2.0 (2026-09-12): Enable after guarded HA-primary firmware deployment.
+#   - v1.1.0 (2026-09-12): Disabled until guarded HA-primary firmware deployment.
 #   - v1.0.0 (2026-08-16): Initial MQTT-down HA fallback for Office lights.
 #:########################################################################################:#

@@ -0,0 +1,57 @@
+#:########################################################################################:#
+# PACKAGE: Office Lights Home Assistant Fallback Synchronization
+# FILE:    Lighting_2Way_Sync/office_lights_ha_fallback_sync.yaml
+# VERSION: v1.1.0
+# DATE:    2026-09-12
+#:########################################################################################:#
+#
+# PURPOSE:
+#   Provides the Home Assistant API transport for Office two-way light control
+#   when MQTT is unavailable. Direct MQTT remains the HA-down transport.
+#
+# OPERATION:
+#   - Synchronizes the Office bunker and overhead control pairs in both directions.
+#   - The automations remain disabled until both ESPHome devices enforce the
+#     HA-primary/MQTT-fallback authority boundary.
+#   - Does not reconcile state during Home Assistant startup, preventing a stale
+#     restored entity state from changing a physical light.
+#
+# DEPENDENCIES:
+#   - Blueprint: zorruno/two_three_way_sync.yaml
+#   - esp-officelights and esp-officeduallights native ESPHome API connections.
+#
+# VERSION HISTORY:
+#   - v1.1.0 (2026-09-12): Disable until guarded HA-primary firmware is deployed.
+#   - v1.0.0 (2026-08-16): Initial MQTT-down HA fallback for Office lights.
+#:########################################################################################:#
+
+automation:
+  #:##########################################################################:#
+  # BUNKER LIGHTS
+  #:##########################################################################:#
+  - id: office_bunker_lights_ha_fallback_sync
+    alias: "Office Bunker Lights HA Fallback Sync"
+    initial_state: false
+    use_blueprint:
+      path: zorruno/two_three_way_sync.yaml
+      input:
+        members:
+          - switch.office_office_main_lightswitch_3_relay_1_bunker_lights
+          - light.esp_officeduallights_light_1_right_hand_bunker_light
+        sync_on_start: false
+        startup_delay: 5
+
+  #:##########################################################################:#
+  # OVERHEAD LIGHTS
+  #:##########################################################################:#
+  - id: office_overhead_lights_ha_fallback_sync
+    alias: "Office Overhead Lights HA Fallback Sync"
+    initial_state: false
+    use_blueprint:
+      path: zorruno/two_three_way_sync.yaml
+      input:
+        members:
+          - switch.office_office_main_lightswitch_3_relay_2_overhead_lights
+          - light.esp_officeduallights_light_2_cool_white_overhead_lights
+        sync_on_start: false
+        startup_delay: 5
@@ -9,9 +9,13 @@
 #   packages/Pool_Controls/pool_light_operation.yaml
 #
 # VERSION:
-#   V1.2 2026-07-20
+#   V1.3 2026-09-06
 #
 # VERSION HISTORY:
+#   V1.3 2026-09-06
+#     - Treat the colour selector's "0= OFF" as a true Operation Mode OFF and
+#       arm the midnight TIMER reset.
+#
 #   V1.2 2026-07-20
 #     - Corrected the documented package filename.
 #     - Documented the relationship with the native ESPHome controls.
@@ -151,6 +155,40 @@ automation:
        target:
          entity_id: input_boolean.timer_light_midnight_pending

+  - id: pool_light_schedule_timer_when_operation_mode_off
+    alias: "Pool Light - Schedule TIMER When Operation Mode Is OFF"
+    description: "Arms the midnight TIMER reset for direct Operation Mode OFF commands."
+    mode: single
+
+    trigger:
+      - platform: state
+        entity_id: select.esp_poollightpower2_operation_mode
+        to: "OFF"
+
+    action:
+      - action: input_boolean.turn_on
+        target:
+          entity_id: input_boolean.timer_light_midnight_pending
+
+  - id: pool_light_send_off_when_colour_off_selected
+    alias: "Pool Light - Send OFF When Colour Off Is Selected"
+    description: "Converts colour selector 0= OFF into Operation Mode OFF with midnight reset."
+    mode: restart
+
+    trigger:
+      - platform: state
+        entity_id: select.esp_poollightpower2_pool_light_mode
+        to: "0= OFF"
+
+    action:
+      - action: mqtt.publish
+        data:
+          topic: "viewroad-commands/poollight-timer/operation"
+          payload: "OFF"
+      - action: input_boolean.turn_on
+        target:
+          entity_id: input_boolean.timer_light_midnight_pending
+
  - id: pool_light_sync_ui_switch_with_real_output
    alias: "Pool Light - Sync UI Switch With Real Output"
    description: "Keeps the UI switch aligned with the real ESPHome pool light output without sending MQTT commands."
@@ -0,0 +1,24 @@
+# Package: BYD Lock Button
+# Purpose:
+#   Provides a voice-assistant-safe BYD lock control that can only issue a lock command.
+# Notes:
+#   The icon reflects the live state of the underlying BYD lock. This button has no
+#   unlock action.
+# Version history:
+#   - 1.0.0: Initial lock-only BYD button.
+#
+#:########################################################################################:#
+# Template Button
+#:########################################################################################:#
+template:
+  - button:
+      - name: "BYD Lock"
+        unique_id: byd_lock_button
+        default_entity_id: button.byd_lock
+        availability: "{{ has_value('lock.atto_3_lock') }}"
+        icon: >-
+          {{ 'mdi:lock' if is_state('lock.atto_3_lock', 'locked') else 'mdi:lock-open' }}
+        press:
+          - action: lock.lock
+            target:
+              entity_id: lock.atto_3_lock
@@ -2,8 +2,8 @@
 # PACKAGE: Energy Cost Monitoring
 ################################################################################
 #
-# Version: 1.3.0
-# Date: 2026-08-23
+# Version: 1.3.1
+# Date: 2026-09-01
 #
 # Purpose:
 #   Track GST-inclusive electricity costs for the three-phase grid supply and
@@ -18,6 +18,8 @@
 #     boundary without averaging the old and new rates.
 #
 # Version history:
+#   1.3.1 (2026-09-01): Move Downstairs Fridge and Freezer shared power-cost
+#     telemetry from X41PP to X68PM.
 #   1.3.0 (2026-08-24): Add Drinks Fridge and Vertical Freezer energy and
 #     cost monitoring.
 #   1.2.0 (2026-08-23): Add Downstairs Lounge North GPO (X48PM) energy and
@@ -326,11 +328,11 @@ template:
        unique_id: energy_cost_downstairs_fridge_rate
        unit_of_measurement: "NZD/h"
        state_class: measurement
-        availability: "{{ has_value('sensor.downstairs_fridge_power_x41pp_power') }}"
+        availability: "{{ has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') }}"
        state: >-
          {{
            (
-              states('sensor.downstairs_fridge_power_x41pp_power') | float(0)
+              states('sensor.downstairs_fridge_gpo_power_x68pm_power') | float(0)
              / 1000
              * states('sensor.electricity_current_price') | float(0)
            ) | round(6)
@@ -1,7 +1,13 @@
 #:########################################################################################:#
 # PACKAGE: Fridge and Freezer Monitoring
 # FILE: packages/fridge_freezer_monitoring.yaml
-# VERSION: v1.11.0 2026-08-30
+# VERSION: v1.13.0 2026-09-03
+#   - Moves Downstairs Freezer temperature, humidity, and battery monitoring
+#     from X62TS to X70TS.
+#   - Moves shared Downstairs Fridge and Freezer power monitoring from X41PP to
+#     the metering-only X68PM GPO.
+#   - Reports an unavailable Main Kitchen Fridge battery monitor explicitly,
+#     rather than showing an unqualified issue.
 #   - Moves Main Kitchen Fridge temperature, humidity, and battery monitoring to
 #     X65TS and adds X64LS illuminance-based door monitoring.
 #   - v1.10.0 2026-08-29: Adds Downstairs Freezer temperature, battery, door, humidity, and shared
@@ -61,8 +67,7 @@
 #   - Seven configured fridge/freezer temperature and battery monitor pairs.
 #   - switch.upstairs_fridge_power_x31pp
 #   - sensor.upstairs_fridge_power_x31pp_power
-#   - switch.downstairs_fridge_power_x41pp
-#   - sensor.downstairs_fridge_power_x41pp_power
+#   - sensor.downstairs_fridge_gpo_power_x68pm_power
 #   - switch.drinks_fridge_power_x59pm
 #   - sensor.drinks_fridge_power_x59pm_power
 #   - switch.vertical_freezer_power_x60pm
@@ -173,7 +178,7 @@ sensor:
  - platform: statistics
    name: "Downstairs Freezer Temperature Average 7 Days"
    unique_id: downstairs_freezer_temperature_average_7_days
-    entity_id: sensor.downstairs_freezer_temperature_x62ts_temperature
+    entity_id: sensor.downstairs_freezer_temperature_x70ts_temperature
    state_characteristic: average_step
    max_age:
      days: 7
@@ -182,7 +187,7 @@ sensor:
  - platform: statistics
    name: "Downstairs Freezer Temperature 95th Percentile 7 Days"
    unique_id: downstairs_freezer_temperature_95th_percentile_7_days
-    entity_id: sensor.downstairs_freezer_temperature_x62ts_temperature
+    entity_id: sensor.downstairs_freezer_temperature_x70ts_temperature
    state_characteristic: percentile
    percentile: 95
    max_age:
@@ -192,7 +197,7 @@ sensor:
  - platform: derivative
    name: "Downstairs Freezer Temperature Change Rate"
    unique_id: downstairs_freezer_temperature_change_rate
-    source: sensor.downstairs_freezer_temperature_x62ts_temperature
+    source: sensor.downstairs_freezer_temperature_x70ts_temperature
    unit_time: h
    time_window: "00:30:00"
    max_sub_interval: "00:05:00"
@@ -414,11 +419,10 @@ template:
        unique_id: downstairs_fridge_power_draw_lost
        device_class: problem
        state: >-
-          {% set power = states('sensor.downstairs_fridge_power_x41pp_power') | float(none) %}
-          {% set changed = states.sensor.downstairs_fridge_power_x41pp_power.last_changed %}
+          {% set power = states('sensor.downstairs_fridge_gpo_power_x68pm_power') | float(none) %}
+          {% set changed = states.sensor.downstairs_fridge_gpo_power_x68pm_power.last_changed %}
          {{
-            is_state('switch.downstairs_fridge_power_x41pp', 'on')
-            and power is not none
+            power is not none
            and power < 1
            and (now() - changed).total_seconds() >= 4 * 60 * 60
          }}
@@ -450,7 +454,11 @@ template:
          {{
            temperature_missing
            or illuminance_missing
-            or (states('sensor.main_kitchen_fridge_temperature_x65ts_battery') | float(-1)) <= 20
+            or battery_missing
+            or (
+              not battery_missing
+              and (states('sensor.main_kitchen_fridge_temperature_x65ts_battery') | float(0)) <= 20
+            )
            or is_state('binary_sensor.main_kitchen_fridge_door_open_too_long', 'on')
            or (
              not temperature_missing
@@ -477,7 +485,9 @@ template:
            {% if illuminance_missing %}
              {% set ns.items = ns.items + ['Door monitor unavailable'] %}
            {% endif %}
-            {% if not battery_missing and (states('sensor.main_kitchen_fridge_temperature_x65ts_battery') | float(-1)) <= 20 %}
+            {% if battery_missing %}
+              {% set ns.items = ns.items + ['Battery monitor unavailable'] %}
+            {% elif (states('sensor.main_kitchen_fridge_temperature_x65ts_battery') | float(0)) <= 20 %}
              {% set ns.items = ns.items + ['Low monitor battery'] %}
            {% endif %}
            {% if states('switch.upstairs_fridge_power_x31pp') in ['unknown', 'unavailable'] or power_missing %}
@@ -596,7 +606,6 @@ template:
          {% set threshold = [9, percentile + 0.5] | min if percentile is not none else 9 %}
          {{
            temperature_missing
-            or battery_missing
            or (states('sensor.lcd_temp_humidity_btt04_battery') | float(-1)) <= 20
            or (not temperature_missing and (states('sensor.lcd_temp_humidity_btt04_temperature') | float(0)) > threshold)
          }}
@@ -608,8 +617,8 @@ template:
            {% set battery_missing = not has_value('sensor.lcd_temp_humidity_btt04_battery') %}
            {% set percentile = states('sensor.wine_fridge_temperature_95th_percentile_7_days') | float(none) %}
            {% set threshold = [9, percentile + 0.5] | min if percentile is not none else 9 %}
-            {% if temperature_missing or battery_missing %}
-              {% set ns.items = ns.items + ['Monitor offline'] %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
            {% endif %}
            {% if not battery_missing and (states('sensor.lcd_temp_humidity_btt04_battery') | float(-1)) <= 20 %}
              {% set ns.items = ns.items + ['Low monitor battery'] %}
@@ -638,7 +647,7 @@ template:
          {% set temperature_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_temperature') %}
          {% set battery_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_battery') %}
          {% set illuminance_missing = not has_value('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') %}
-          {% set power_missing = not has_value('sensor.downstairs_fridge_power_x41pp_power') %}
+          {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
          {% set percentile = states('sensor.downstairs_fridge_temperature_95th_percentile_7_days') | float(none) %}
          {% set threshold = [10, percentile + 0.5] | min if percentile is not none else 10 %}
          {{
@@ -651,7 +660,6 @@ template:
              and not is_state('binary_sensor.downstairs_fridge_temperature_recovery_grace', 'on')
              and (states('sensor.downstairs_fridge_temperature_x43ts_temperature') | float(0)) > threshold
            )
-            or states('switch.downstairs_fridge_power_x41pp') != 'on'
            or power_missing
            or is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on')
          }}
@@ -662,7 +670,7 @@ template:
            {% set temperature_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_temperature') %}
            {% set battery_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_battery') %}
            {% set illuminance_missing = not has_value('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') %}
-            {% set power_missing = not has_value('sensor.downstairs_fridge_power_x41pp_power') %}
+            {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
            {% set percentile = states('sensor.downstairs_fridge_temperature_95th_percentile_7_days') | float(none) %}
            {% set threshold = [10, percentile + 0.5] | min if percentile is not none else 10 %}
            {% if temperature_missing %}
@@ -674,10 +682,8 @@ template:
            {% if not battery_missing and (states('sensor.downstairs_fridge_temperature_x43ts_battery') | float(-1)) <= 20 %}
              {% set ns.items = ns.items + ['Low monitor battery'] %}
            {% endif %}
-            {% if states('switch.downstairs_fridge_power_x41pp') in ['unknown', 'unavailable'] or power_missing %}
+            {% if power_missing %}
              {% set ns.items = ns.items + ['Power monitoring unavailable'] %}
-            {% elif not is_state('switch.downstairs_fridge_power_x41pp', 'on') %}
-              {% set ns.items = ns.items + ['Power switched off'] %}
            {% elif is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on') %}
              {% set ns.items = ns.items + ['Power lost - no power draw for 4 hours'] %}
            {% endif %}
@@ -701,7 +707,7 @@ template:
            {{ [10, percentile + 0.5] | min if percentile is not none else 10 }}
          change_rate: "{{ states('sensor.downstairs_fridge_temperature_change_rate') }}"
          battery: "{{ states('sensor.downstairs_fridge_temperature_x43ts_battery') }}"
-          power: "{{ states('sensor.downstairs_fridge_power_x41pp_power') }}"
+          power: "{{ states('sensor.downstairs_fridge_gpo_power_x68pm_power') }}"
          door_open: "{{ is_state('binary_sensor.downstairs_fridge_door_open', 'on') }}"
          illuminance: "{{ states('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') }}"

@@ -710,22 +716,22 @@ template:
        device_class: problem
        delay_on: "00:01:00"
        state: >-
-          {% set temperature_missing = not has_value('sensor.downstairs_freezer_temperature_x62ts_temperature') %}
-          {% set battery_missing = not has_value('sensor.downstairs_freezer_temperature_x62ts_battery') %}
-          {% set power_missing = not has_value('sensor.downstairs_fridge_power_x41pp_power') %}
+          {% set temperature_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_temperature') %}
+          {% set battery_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_battery') %}
+          {% set illuminance_missing = not has_value('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') %}
+          {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
          {% set percentile = states('sensor.downstairs_freezer_temperature_95th_percentile_7_days') | float(none) %}
          {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
          {{
            temperature_missing
-            or battery_missing
-            or (states('sensor.downstairs_freezer_temperature_x62ts_battery') | float(-1)) <= 20
+            or illuminance_missing
+            or (states('sensor.downstairs_freezer_temperature_x70ts_battery') | float(-1)) <= 20
            or is_state('binary_sensor.downstairs_freezer_door_open_too_long', 'on')
            or (
              not temperature_missing
              and not is_state('binary_sensor.downstairs_freezer_temperature_recovery_grace', 'on')
-              and (states('sensor.downstairs_freezer_temperature_x62ts_temperature') | float(0)) > threshold
+              and (states('sensor.downstairs_freezer_temperature_x70ts_temperature') | float(0)) > threshold
            )
-            or states('switch.downstairs_fridge_power_x41pp') != 'on'
            or power_missing
            or is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on')
          }}
@@ -733,21 +739,23 @@ template:
          appliance: "Downstairs Freezer"
          issues: >-
            {% set ns = namespace(items=[]) %}
-            {% set temperature_missing = not has_value('sensor.downstairs_freezer_temperature_x62ts_temperature') %}
-            {% set battery_missing = not has_value('sensor.downstairs_freezer_temperature_x62ts_battery') %}
-            {% set power_missing = not has_value('sensor.downstairs_fridge_power_x41pp_power') %}
+            {% set temperature_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_temperature') %}
+            {% set battery_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_battery') %}
+            {% set illuminance_missing = not has_value('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') %}
+            {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
            {% set percentile = states('sensor.downstairs_freezer_temperature_95th_percentile_7_days') | float(none) %}
            {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
-            {% if temperature_missing or battery_missing %}
-              {% set ns.items = ns.items + ['Monitor offline'] %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
            {% endif %}
-            {% if not battery_missing and (states('sensor.downstairs_freezer_temperature_x62ts_battery') | float(-1)) <= 20 %}
+            {% if illuminance_missing %}
+              {% set ns.items = ns.items + ['Door monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.downstairs_freezer_temperature_x70ts_battery') | float(-1)) <= 20 %}
              {% set ns.items = ns.items + ['Low monitor battery'] %}
            {% endif %}
-            {% if states('switch.downstairs_fridge_power_x41pp') in ['unknown', 'unavailable'] or power_missing %}
+            {% if power_missing %}
              {% set ns.items = ns.items + ['Shared power monitoring unavailable'] %}
-            {% elif not is_state('switch.downstairs_fridge_power_x41pp', 'on') %}
-              {% set ns.items = ns.items + ['Shared power switched off'] %}
            {% elif is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on') %}
              {% set ns.items = ns.items + ['Shared power lost - no power draw for 4 hours'] %}
            {% endif %}
@@ -755,7 +763,7 @@ template:
              {% set ns.items = ns.items + ['Door open too long'] %}
            {% elif not temperature_missing and is_state('binary_sensor.downstairs_freezer_temperature_recovery_grace', 'on') %}
              {% set ns.items = ns.items + ['Temperature alert delayed - door recently open'] %}
-            {% elif not temperature_missing and (states('sensor.downstairs_freezer_temperature_x62ts_temperature') | float(0)) > threshold %}
+            {% elif not temperature_missing and (states('sensor.downstairs_freezer_temperature_x70ts_temperature') | float(0)) > threshold %}
              {% if (states('sensor.downstairs_freezer_temperature_change_rate') | float(0)) >= 2 %}
                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
              {% else %}
@@ -763,15 +771,15 @@ template:
              {% endif %}
            {% endif %}
            {{ ns.items }}
-          temperature: "{{ states('sensor.downstairs_freezer_temperature_x62ts_temperature') }}"
-          humidity: "{{ states('sensor.downstairs_freezer_temperature_x62ts_humidity') }}"
+          temperature: "{{ states('sensor.downstairs_freezer_temperature_x70ts_temperature') }}"
+          humidity: "{{ states('sensor.downstairs_freezer_temperature_x70ts_humidity') }}"
          average_7_days: "{{ states('sensor.downstairs_freezer_temperature_average_7_days') }}"
          alert_threshold: >-
            {% set percentile = states('sensor.downstairs_freezer_temperature_95th_percentile_7_days') | float(none) %}
            {{ [-5, percentile + 0.5] | min if percentile is not none else -5 }}
          change_rate: "{{ states('sensor.downstairs_freezer_temperature_change_rate') }}"
-          battery: "{{ states('sensor.downstairs_freezer_temperature_x62ts_battery') }}"
-          power: "{{ states('sensor.downstairs_fridge_power_x41pp_power') }}"
+          battery: "{{ states('sensor.downstairs_freezer_temperature_x70ts_battery') }}"
+          power: "{{ states('sensor.downstairs_fridge_gpo_power_x68pm_power') }}"
          door_open: "{{ is_state('binary_sensor.downstairs_freezer_door_open', 'on') }}"
          illuminance: "{{ states('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') }}"

@@ -787,7 +795,6 @@ template:
          {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
          {{
            temperature_missing
-            or battery_missing
            or (states('sensor.drinks_freezer_environment_lcd_btt02_battery') | float(-1)) <= 20
            or states('switch.drinks_fridge_power_x59pm') != 'on'
            or power_missing
@@ -803,8 +810,8 @@ template:
            {% set power_missing = not has_value('sensor.drinks_fridge_power_x59pm_power') %}
            {% set percentile = states('sensor.drinks_freezer_temperature_95th_percentile_7_days') | float(none) %}
            {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
-            {% if temperature_missing or battery_missing %}
-              {% set ns.items = ns.items + ['Monitor offline'] %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
            {% endif %}
            {% if not battery_missing and (states('sensor.drinks_freezer_environment_lcd_btt02_battery') | float(-1)) <= 20 %}
              {% set ns.items = ns.items + ['Low monitor battery'] %}
@@ -845,7 +852,6 @@ template:
          {% set threshold = [-10, percentile + 6] | min if percentile is not none else -10 %}
          {{
            temperature_missing
-            or battery_missing
            or (states('sensor.lcd_temp_humidity_btt03_battery') | float(-1)) <= 20
            or states('switch.vertical_freezer_power_x60pm') != 'on'
            or power_missing
@@ -861,8 +867,8 @@ template:
            {% set power_missing = not has_value('sensor.vertical_freezer_power_x60pm_power') %}
            {% set percentile = states('sensor.vertical_freezer_temperature_95th_percentile_7_days') | float(none) %}
            {% set threshold = [-10, percentile + 6] | min if percentile is not none else -10 %}
-            {% if temperature_missing or battery_missing %}
-              {% set ns.items = ns.items + ['Monitor offline'] %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
            {% endif %}
            {% if not battery_missing and (states('sensor.lcd_temp_humidity_btt03_battery') | float(-1)) <= 20 %}
              {% set ns.items = ns.items + ['Low monitor battery'] %}
@@ -9,9 +9,12 @@
 #   packages/garage_corner_light_cctv_motion.yaml
 #
 # VERSION:
-#   V1.0 2026-06-29
+#   V1.1 2026-08-31
 #
 # VERSION HISTORY:
+#   V1.1 2026-08-31
+#     - Restrict CCTV motion activation to one hour before sunset through one hour after sunrise.
+#
 #   V1.0 2026-06-29
 #     - Initial package.
 #     - Turns the garage external corner light on when CCTV motion MQTT payload "1" is received.
@@ -20,7 +23,8 @@
 #     - Adds a Home Assistant enable switch for CCTV movement triggers.
 #
 # PURPOSE:
-#   Turns on the garage external corner light from selected CCTV motion MQTT triggers.
+#   Turns on the garage external corner light from selected CCTV motion MQTT triggers
+#   during the configured night window.
 #
 # NOTES:
 #   - The light is:
@@ -31,6 +35,7 @@
 #
 #   - Turning OFF "Garage corner light movement triggers" prevents new CCTV triggers.
 #   - If a timer is already running, it will still finish and turn the light off.
+#   - CCTV triggers run from one hour before sunset until one hour after sunrise.
 #
 #:########################################################################################:#
 # User Configuration                                                                      #
@@ -91,6 +96,12 @@ automation:
        entity_id: input_boolean.garage_corner_light_movement_triggers
        state: "on"

+      - condition: sun
+        after: sunset
+        after_offset: "-01:00:00"
+        before: sunrise
+        before_offset: "01:00:00"
+
    action:
      - service: switch.turn_on
        target:
@@ -9,7 +9,7 @@
 #   jobs_tracker_appliance_completion_triggers.yaml
 #
 # VERSION:
-#   V1.0 2026-08-15
+#   V1.1 2026-09-03
 #
 # PURPOSE:
 #   Provides time-qualified appliance door and lid triggers for Jobs Tracker completion.
@@ -19,9 +19,13 @@
 #
 # OPERATION:
 #   Each contact must remain open for five seconds before its corresponding Jobs Tracker
-#   completion route is called. The job registry owns the completion entity mappings.
+#   completion route is called. Starting the dryer or washer clears only a previous Due
+#   unload job, so the next finished cycle creates its own new unload task.
 #
 # VERSION HISTORY:
+#   V1.1 2026-09-03
+#     - Clear a pending dryer or washer unload job when its next cycle starts.
+#
 #   V1.0 2026-08-15
 #     - Added five-second door and lid open completion triggers for dryer and washer jobs.
 #
@@ -63,3 +67,43 @@ automation:
        data:
          completion_entity: binary_sensor.washing_machine_lid_status_x39rs_contact
          completion_to_state: "on"
+
+  - id: jobs_tracker_clear_dryer_unload_on_start
+    alias: "Jobs Tracker - Clear Dryer Unload on Start"
+    description: "Clears an outstanding Empty the Dryer job when a new dryer cycle starts."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: sensor.appliance_monitor_dryer_monitor
+        to: Operating
+
+    conditions:
+      - condition: state
+        entity_id: sensor.jobs_tracker_empty_dryer
+        state: Due
+
+    actions:
+      - action: script.jobs_tracker_dispatch
+        data:
+          job_id: empty_dryer
+
+  - id: jobs_tracker_clear_washer_unload_on_start
+    alias: "Jobs Tracker - Clear Washer Unload on Start"
+    description: "Clears an outstanding Empty the Washer job when a new washer cycle starts."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: sensor.appliance_monitor_washing_machine_monitor
+        to: Operating
+
+    conditions:
+      - condition: state
+        entity_id: sensor.jobs_tracker_empty_washing_machine
+        state: Due
+
+    actions:
+      - action: script.jobs_tracker_dispatch
+        data:
+          job_id: empty_washing_machine
@@ -0,0 +1,65 @@
+#:########################################################################################:#
+# Jobs Tracker Appliance Completion Triggers Package                                      #
+#:########################################################################################:#
+#
+# TITLE:
+#   Jobs Tracker Appliance Completion Triggers
+#
+# FILE:
+#   jobs_tracker_appliance_completion_triggers.yaml
+#
+# VERSION:
+#   V1.0 2026-08-15
+#
+# PURPOSE:
+#   Provides time-qualified appliance door and lid triggers for Jobs Tracker completion.
+#
+# DEPENDS ON:
+#   packages/Job_Chore_Tracking/jobs_tracker_jobs.yaml V3.5 or newer.
+#
+# OPERATION:
+#   Each contact must remain open for five seconds before its corresponding Jobs Tracker
+#   completion route is called. The job registry owns the completion entity mappings.
+#
+# VERSION HISTORY:
+#   V1.0 2026-08-15
+#     - Added five-second door and lid open completion triggers for dryer and washer jobs.
+#
+#:########################################################################################:#
+
+automation:
+  - id: jobs_tracker_empty_dryer_door_open
+    alias: "Jobs Tracker - Empty Dryer on Door Open"
+    description: "Marks Empty the Dryer complete after the dryer door is open for five seconds."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: binary_sensor.dryer_door_status_x34rs_contact
+        to: "on"
+        for:
+          seconds: 5
+
+    actions:
+      - action: script.jobs_tracker_route_completion
+        data:
+          completion_entity: binary_sensor.dryer_door_status_x34rs_contact
+          completion_to_state: "on"
+
+  - id: jobs_tracker_empty_washing_machine_lid_open
+    alias: "Jobs Tracker - Empty Washer on Lid Open"
+    description: "Marks Empty the Washer complete after the washer lid is open for five seconds."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: binary_sensor.washing_machine_lid_status_x39rs_contact
+        to: "on"
+        for:
+          seconds: 5
+
+    actions:
+      - action: script.jobs_tracker_route_completion
+        data:
+          completion_entity: binary_sensor.washing_machine_lid_status_x39rs_contact
+          completion_to_state: "on"
@@ -635,10 +635,13 @@ script:
              entity_id: input_datetime.outdoor_lighting_number_16_last_schedule_event
            data:
              datetime: "{{ (selected_event_ts | int(0)) | timestamp_custom('%Y-%m-%d %H:%M:%S', true) }}"
-          - action: script.outdoor_lighting_ramp_number_16
+          - action: script.turn_on
+            target:
+              entity_id: script.outdoor_lighting_ramp_number_16
            data:
-              target_brightness: "{{ selected_target | int(0) }}"
-              ramp_seconds: "{{ ramp_to_use | int(0) }}"
+              variables:
+                target_brightness: "{{ selected_target | int(0) }}"
+                ramp_seconds: "{{ ramp_to_use | int(0) }}"

  #############################################################################
  # 4) Main Entrance Outside LED Lights
@@ -787,10 +790,13 @@ script:
                  entity_id: input_datetime.outdoor_lighting_main_entrance_last_schedule_event
                data:
                  datetime: "{{ (selected_event_ts | int(0)) | timestamp_custom('%Y-%m-%d %H:%M:%S', true) }}"
-          - action: script.outdoor_lighting_ramp_main_entrance
+          - action: script.turn_on
+            target:
+              entity_id: script.outdoor_lighting_ramp_main_entrance
            data:
-              target_brightness: "{{ selected_target | int(0) }}"
-              ramp_seconds: "{{ ramp_to_use | int(0) }}"
+              variables:
+                target_brightness: "{{ selected_target | int(0) }}"
+                ramp_seconds: "{{ ramp_to_use | int(0) }}"

  #############################################################################
  # Reconcile all
@@ -1,8 +1,8 @@
 #:########################################################################################:#
 # Package: Pet Feeding and Jobs Timing
 # File:    pet_feeding_and_jobs.yaml
-# Version: v1.4.0
-# Date:    2026-07-26
+# Version: v1.5.2
+# Date:    2026-09-09
 #
 # Purpose:
 #   Provides legacy MQTT pet activity sensors and Jobs-derived timing sensors for
@@ -17,6 +17,11 @@
 #     instead of exposing a numeric sentinel value.
 #
 # Version History:
+#   - v1.5.2 (2026-09-12): Ignore stale restored dog-button event states so
+#     reconnects cannot create false timestamps or visual feedback.
+#   - v1.5.1 (2026-09-09): Extended dog-button feedback intervals to 500 ms.
+#   - v1.5.0 (2026-09-09): Added visual feedback flashes for physical dog
+#     completion buttons, using the Lounge outside light relay.
 #   - v1.4.0 (2026-07-26): Announce four physical job completions on the Sony
 #     lounge TV and both Pushover devices.
 #   - v1.3.0 (2026-07-26): Restore retained dog-fed and jobs-done activity
@@ -122,7 +127,12 @@ automation:
    conditions:
      - condition: template
        value_template: >-
-          {{ trigger.to_state.state not in ['unknown', 'unavailable'] }}
+          {% set valid_state = trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable'] %}
+          {% set event_ts = as_timestamp(trigger.to_state.state, 0)
+            if valid_state else 0 %}
+          {% set event_age = as_timestamp(now()) - event_ts %}
+          {{ valid_state and event_ts > 0 and event_age >= 0 and event_age <= 30 }}
    actions:
      - action: input_datetime.set_datetime
        target:
@@ -145,7 +155,12 @@ automation:
    conditions:
      - condition: template
        value_template: >-
-          {{ trigger.to_state.state not in ['unknown', 'unavailable'] }}
+          {% set valid_state = trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable'] %}
+          {% set event_ts = as_timestamp(trigger.to_state.state, 0)
+            if valid_state else 0 %}
+          {% set event_age = as_timestamp(now()) - event_ts %}
+          {{ valid_state and event_ts > 0 and event_age >= 0 and event_age <= 30 }}
    actions:
      - action: input_datetime.set_datetime
        target:
@@ -227,3 +242,64 @@ automation:
          title: "Jobs Announcement"
          short_announcement: "{{ completion_message }}"
          long_announcement: "{{ completion_message }}"
+
+  #:######################################################################################:#
+  # AUTOMATION: Physical Dog-Button Visual Feedback
+  #:######################################################################################:#
+  - id: dog_button_visual_feedback
+    alias: "Jobs - Dog Button Visual Feedback"
+    description: >-
+      Flashes the Lounge outside light relay for one physical single-press,
+      preserving its original state after dog feeding or depooping is recorded.
+    mode: queued
+    max: 10
+    triggers:
+      - trigger: state
+        entity_id:
+          - event.jobs_dog_fed_button_x14bt_action
+          - event.jobs_dog_depooped_button_x15bt_action
+    conditions:
+      - condition: template
+        value_template: >-
+          {% set valid_state = trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable'] %}
+          {% set event_ts = as_timestamp(trigger.to_state.state, 0)
+            if valid_state else 0 %}
+          {% set event_age = as_timestamp(now()) - event_ts %}
+          {{
+            valid_state
+            and event_ts > 0
+            and event_age >= 0
+            and event_age <= 30
+            and trigger.to_state.attributes.event_type == 'single'
+          }}
+    actions:
+      - variables:
+          initial_state: "{{ states('switch.esp_loungesouthleftswitch_relay_2_outside_light_1') }}"
+          flash_count: >-
+            {{ 2 if trigger.entity_id == 'event.jobs_dog_fed_button_x14bt_action' else 3 }}
+      - repeat:
+          count: "{{ flash_count | int }}"
+          sequence:
+            - choose:
+                - conditions:
+                    - condition: template
+                      value_template: "{{ initial_state == 'off' }}"
+                  sequence:
+                    - action: switch.turn_on
+                      target:
+                        entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                    - delay: "00:00:00.500"
+                    - action: switch.turn_off
+                      target:
+                        entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                    - delay: "00:00:00.500"
+              default:
+                - action: switch.turn_off
+                  target:
+                    entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                - delay: "00:00:00.500"
+                - action: switch.turn_on
+                  target:
+                    entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                - delay: "00:00:00.500"
@@ -9,42 +9,24 @@
 #   quiet_time_on_off_actions.yaml
 #
 # VERSION:
-#   V1.2 2026-06-20
-#
-# VERSION HISTORY:
-#   V1.2 2026-06-20
-#     - Added Quiet Time OFF action to change OpenHASP panel openhasp_1
-#       back to page 1.
-#
-#   V1.1 2026-06-15
-#     - Added separate Quiet Time ON and Quiet Time OFF action sections.
-#     - Added support for non-binary Quiet Time OFF actions.
-#     - Sets input_number.openhasp_1_backlight_level to 200 when Quiet Time ends.
-#
-#   V1.0 2026-06-15
-#     - Initial standalone package split out from the main Quiet Time package.
-#     - Turns selected entities on/off when input_boolean.quiet_time changes.
+#   V1.3 2026-09-04
 #
 # PURPOSE:
 #   Runs local Home Assistant actions when Quiet Time is turned ON or OFF.
 #
-#   The main Quiet Time package should continue to own:
-#     - input_boolean.quiet_time
-#     - daily reset behaviour
-#     - MQTT quiet_time state publishing
+#   The main Quiet Time package owns the helper, daily reset behaviour, and MQTT
+#   publishing. This package owns extra local Quiet Time actions.
 #
-#   This package only handles extra local actions that should happen when
-#   Quiet Time starts or ends.
+# VERSION HISTORY:
+#   V1.3 2026-09-04
+#     - Disables Flounder Motion Wake during Quiet Time and requests a one-off
+#       10-second presence fade to Screen Off.
+#     - Restores Flounder Motion Wake when Quiet Time ends.
 #
-# EDITING NOTES:
-#   - Add normal on/off entities to the relevant entity lists.
-#   - Empty lists are fine and will simply do nothing.
-#   - Use the "Other Quiet Time OFF Actions" section for things that are not
-#     simple on/off actions, such as setting input_numbers, selects, scenes,
-#     scripts, MQTT commands, or custom service calls.
+#   V1.2 2026-06-20
+#     - Added Quiet Time OFF action to change OpenHASP panel openhasp_1 back to
+#       page 1.
 #
-################################################################################
-
 ################################################################################
 # AUTOMATIONS
 ################################################################################
@@ -56,56 +38,15 @@ automation:
    mode: single

    variables:
-      ##########################################################################
-      # QUIET TIME ON ACTION LISTS
-      ##########################################################################
-      #
-      # These actions run when input_boolean.quiet_time changes to "on".
-      #
-
      quiet_time_on_turn_off_entities:
        - light.led_matrix_display_led_matrix_display_display
-
      quiet_time_on_turn_on_entities: []
-
-      ##########################################################################
-      # QUIET TIME OFF ACTION LISTS
-      ##########################################################################
-      #
-      # These actions run when input_boolean.quiet_time changes to "off".
-      #
-
      quiet_time_off_turn_off_entities: []
-
      quiet_time_off_turn_on_entities:
        - light.led_matrix_display_led_matrix_display_display
-
-      ##########################################################################
-      # OTHER QUIET TIME OFF ACTION VALUES
-      ##########################################################################
-      #
-      # Use this list for input_number helpers that should be set when Quiet Time
-      # ends.
-      #
-      # Format:
-      #   - entity_id: input_number.some_helper
-      #     value: 123
-      #
-
      quiet_time_off_input_number_values:
        - entity_id: input_number.openhasp_1_backlight_level
          value: 200
-
-      ##########################################################################
-      # OPENHASP QUIET TIME OFF PAGE ACTION
-      ##########################################################################
-      #
-      # Sends the OpenHASP panel back to the main page when Quiet Time ends.
-      #
-      # Current OpenHASP MQTT command topic:
-      #   hasp/openhasp_1/command/page
-      #
-
      quiet_time_off_openhasp_page_topic: "hasp/openhasp_1/command/page"
      quiet_time_off_openhasp_page: 1

@@ -121,13 +62,6 @@ automation:

    actions:
      - choose:
-          ######################################################################
-          # QUIET TIME ON ACTIONS
-          ######################################################################
-          #
-          # Runs when Quiet Time starts.
-          #
-
          - conditions:
              - condition: template
                value_template: "{{ trigger.to_state.state == 'on' }}"
@@ -138,47 +72,44 @@ automation:
                    - action: homeassistant.turn_off
                      target:
                        entity_id: "{{ repeat.item }}"
-
              - repeat:
                  for_each: "{{ quiet_time_on_turn_on_entities }}"
                  sequence:
                    - action: homeassistant.turn_on
                      target:
                        entity_id: "{{ repeat.item }}"
-
-          ######################################################################
-          # QUIET TIME OFF ACTIONS
-          ######################################################################
-          #
-          # Runs when Quiet Time ends.
-          #
-
+              # Stop camera motion from extending presence, then fade the
+              # current session to the existing Screen Off base state.
+              - action: switch.turn_off
+                target:
+                  entity_id: switch.flounder_kiosk_motion_wake
+              - wait_template: "{{ is_state('switch.flounder_kiosk_motion_wake', 'off') }}"
+                timeout: "00:00:10"
+                continue_on_timeout: true
+              - action: mqtt.publish
+                data:
+                  topic: "viewroad-commands/flounder/presence/end"
+                  payload: "10"
+                  retain: false
          - conditions:
              - condition: template
                value_template: "{{ trigger.to_state.state == 'off' }}"
            sequence:
-              ##################################################################
-              # Quiet Time OFF - binary/entity actions
-              ##################################################################
-
              - repeat:
                  for_each: "{{ quiet_time_off_turn_off_entities }}"
                  sequence:
                    - action: homeassistant.turn_off
                      target:
                        entity_id: "{{ repeat.item }}"
-
              - repeat:
                  for_each: "{{ quiet_time_off_turn_on_entities }}"
                  sequence:
                    - action: homeassistant.turn_on
                      target:
                        entity_id: "{{ repeat.item }}"
-
-              ##################################################################
-              # Quiet Time OFF - input_number set actions
-              ##################################################################
-
+              - action: switch.turn_on
+                target:
+                  entity_id: switch.flounder_kiosk_motion_wake
              - repeat:
                  for_each: "{{ quiet_time_off_input_number_values }}"
                  sequence:
@@ -187,34 +118,8 @@ automation:
                        entity_id: "{{ repeat.item.entity_id }}"
                      data:
                        value: "{{ repeat.item.value | float }}"
-
-              ##################################################################
-              # Quiet Time OFF - OpenHASP page action
-              ##################################################################
-              #
-              # Change OpenHASP panel back to page 1 when Quiet Time ends.
-              #
-
              - action: mqtt.publish
                data:
                  topic: "{{ quiet_time_off_openhasp_page_topic }}"
                  payload: "{{ quiet_time_off_openhasp_page | int }}"
                  retain: false
-
-              ##################################################################
-              # Quiet Time OFF - other custom actions
-              ##################################################################
-              #
-              # Add any extra non-binary service calls here later.
-              #
-              # Examples:
-              #
-              # - action: script.some_script
-              #
-              # - action: select.select_option
-              #   target:
-              #     entity_id: select.some_select
-              #   data:
-              #     option: "Some Option"
-              #
-              ##################################################################
@@ -0,0 +1,245 @@
+################################################################################
+# Quiet Time On / Off Actions Package
+################################################################################
+#
+# TITLE:
+#   Quiet Time On / Off Actions
+#
+# FILE:
+#   quiet_time_on_off_actions.yaml
+#
+# VERSION:
+#   V1.3 2026-09-04
+#     - Disables Flounder Motion Wake during Quiet Time and requests a one-off
+#       10-second presence fade to Screen Off.
+#     - Restores Flounder Motion Wake when Quiet Time ends.
+#
+#   V1.2 2026-06-20
+#
+# VERSION HISTORY:
+#   V1.2 2026-06-20
+#     - Added Quiet Time OFF action to change OpenHASP panel openhasp_1
+#       back to page 1.
+#
+#   V1.1 2026-06-15
+#     - Added separate Quiet Time ON and Quiet Time OFF action sections.
+#     - Added support for non-binary Quiet Time OFF actions.
+#     - Sets input_number.openhasp_1_backlight_level to 200 when Quiet Time ends.
+#
+#   V1.0 2026-06-15
+#     - Initial standalone package split out from the main Quiet Time package.
+#     - Turns selected entities on/off when input_boolean.quiet_time changes.
+#
+# PURPOSE:
+#   Runs local Home Assistant actions when Quiet Time is turned ON or OFF.
+#
+#   The main Quiet Time package should continue to own:
+#     - input_boolean.quiet_time
+#     - daily reset behaviour
+#     - MQTT quiet_time state publishing
+#
+#   This package only handles extra local actions that should happen when
+#   Quiet Time starts or ends.
+#
+# EDITING NOTES:
+#   - Add normal on/off entities to the relevant entity lists.
+#   - Empty lists are fine and will simply do nothing.
+#   - Use the "Other Quiet Time OFF Actions" section for things that are not
+#     simple on/off actions, such as setting input_numbers, selects, scenes,
+#     scripts, MQTT commands, or custom service calls.
+#
+################################################################################
+
+################################################################################
+# AUTOMATIONS
+################################################################################
+
+automation:
+  - id: quiet_time_state_change_actions
+    alias: "Quiet Time - State Change Actions"
+    description: "Runs configured Home Assistant actions when Quiet Time is turned on or off."
+    mode: single
+
+    variables:
+      ##########################################################################
+      # QUIET TIME ON ACTION LISTS
+      ##########################################################################
+      #
+      # These actions run when input_boolean.quiet_time changes to "on".
+      #
+
+      quiet_time_on_turn_off_entities:
+        - light.led_matrix_display_led_matrix_display_display
+
+      quiet_time_on_turn_on_entities: []
+
+      ##########################################################################
+      # QUIET TIME OFF ACTION LISTS
+      ##########################################################################
+      #
+      # These actions run when input_boolean.quiet_time changes to "off".
+      #
+
+      quiet_time_off_turn_off_entities: []
+
+      quiet_time_off_turn_on_entities:
+        - light.led_matrix_display_led_matrix_display_display
+
+      ##########################################################################
+      # OTHER QUIET TIME OFF ACTION VALUES
+      ##########################################################################
+      #
+      # Use this list for input_number helpers that should be set when Quiet Time
+      # ends.
+      #
+      # Format:
+      #   - entity_id: input_number.some_helper
+      #     value: 123
+      #
+
+      quiet_time_off_input_number_values:
+        - entity_id: input_number.openhasp_1_backlight_level
+          value: 200
+
+      ##########################################################################
+      # OPENHASP QUIET TIME OFF PAGE ACTION
+      ##########################################################################
+      #
+      # Sends the OpenHASP panel back to the main page when Quiet Time ends.
+      #
+      # Current OpenHASP MQTT command topic:
+      #   hasp/openhasp_1/command/page
+      #
+
+      quiet_time_off_openhasp_page_topic: "hasp/openhasp_1/command/page"
+      quiet_time_off_openhasp_page: 1
+
+    triggers:
+      - trigger: state
+        entity_id: input_boolean.quiet_time
+        from:
+          - "on"
+          - "off"
+        to:
+          - "on"
+          - "off"
+
+    actions:
+      - choose:
+          ######################################################################
+          # QUIET TIME ON ACTIONS
+          ######################################################################
+          #
+          # Runs when Quiet Time starts.
+          #
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.to_state.state == 'on' }}"
+            sequence:
+              - repeat:
+                  for_each: "{{ quiet_time_on_turn_off_entities }}"
+                  sequence:
+                    - action: homeassistant.turn_off
+                      target:
+                        entity_id: "{{ repeat.item }}"
+
+               - repeat:
+                   for_each: "{{ quiet_time_on_turn_on_entities }}"
+                   sequence:
+                     - action: homeassistant.turn_on
+                       target:
+                         entity_id: "{{ repeat.item }}"
+
+               # Stop camera motion from extending presence, then fade the
+               # current session to the existing Screen Off base state.
+               - action: switch.turn_off
+                 target:
+                   entity_id: switch.flounder_kiosk_motion_wake
+
+               - wait_template: "{{ is_state('switch.flounder_kiosk_motion_wake', 'off') }}"
+                 timeout: "00:00:10"
+                 continue_on_timeout: true
+
+               - action: mqtt.publish
+                 data:
+                   topic: "viewroad-commands/flounder/presence/end"
+                   payload: "10"
+                   retain: false
+
+          ######################################################################
+          # QUIET TIME OFF ACTIONS
+          ######################################################################
+          #
+          # Runs when Quiet Time ends.
+          #
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.to_state.state == 'off' }}"
+            sequence:
+              ##################################################################
+              # Quiet Time OFF - binary/entity actions
+              ##################################################################
+
+              - repeat:
+                  for_each: "{{ quiet_time_off_turn_off_entities }}"
+                  sequence:
+                    - action: homeassistant.turn_off
+                      target:
+                        entity_id: "{{ repeat.item }}"
+
+               - repeat:
+                   for_each: "{{ quiet_time_off_turn_on_entities }}"
+                   sequence:
+                     - action: homeassistant.turn_on
+                       target:
+                         entity_id: "{{ repeat.item }}"
+
+               - action: switch.turn_on
+                 target:
+                   entity_id: switch.flounder_kiosk_motion_wake
+
+              ##################################################################
+              # Quiet Time OFF - input_number set actions
+              ##################################################################
+
+              - repeat:
+                  for_each: "{{ quiet_time_off_input_number_values }}"
+                  sequence:
+                    - action: input_number.set_value
+                      target:
+                        entity_id: "{{ repeat.item.entity_id }}"
+                      data:
+                        value: "{{ repeat.item.value | float }}"
+
+              ##################################################################
+              # Quiet Time OFF - OpenHASP page action
+              ##################################################################
+              #
+              # Change OpenHASP panel back to page 1 when Quiet Time ends.
+              #
+
+              - action: mqtt.publish
+                data:
+                  topic: "{{ quiet_time_off_openhasp_page_topic }}"
+                  payload: "{{ quiet_time_off_openhasp_page | int }}"
+                  retain: false
+
+              ##################################################################
+              # Quiet Time OFF - other custom actions
+              ##################################################################
+              #
+              # Add any extra non-binary service calls here later.
+              #
+              # Examples:
+              #
+              # - action: script.some_script
+              #
+              # - action: select.select_option
+              #   target:
+              #     entity_id: select.some_select
+              #   data:
+              #     option: "Some Option"
+              #
+              ##################################################################
@@ -0,0 +1,164 @@
+#:########################################################################################:#
+# View Road Smoke Alarm RF Package - V1.2.0                                                #
+#:########################################################################################:#
+# Receives normalized AJ-765 RF state from the decoder running on beaver.                  #
+#                                                                                          #
+# V1.2 performs early RF fingerprint classification, normally shortly after RF activity.   #
+#                                                                                          #
+# Current RF fingerprints:                                                                 #
+# - detector_test : TEST button transmission from a detector                               #
+# - remote_test   : TEST transmission matching the remote capture                          #
+# - remote_hush   : HUSH/LOCATE button on the Goldair remote                              #
+# - smoke_alarm   : Experimental only - not yet considered authoritative                   #
+#                                                                                          #
+# Individual detector identity has NOT been found in the RF protocol.                      #
+#:########################################################################################:#
+
+
+mqtt:
+
+  - binary_sensor:
+      name: "RF Interconnect"
+      unique_id: view_road_smoke_alarm_rf_interconnect
+      default_entity_id: binary_sensor.smoke_alarm_rf_interconnect
+
+      state_topic: "viewroad-status/smokealarms/rf/interconnect"
+      payload_on: "ON"
+      payload_off: "OFF"
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:radio-tower
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+        name: "Smoke Alarm RF Monitor"
+        manufacturer: "Zorruno"
+        model: "AJ-765 RF Monitor"
+        sw_version: "1.2.0"
+
+
+  - event:
+      name: "RF Event"
+      unique_id: view_road_smoke_alarm_rf_event
+      default_entity_id: event.smoke_alarm_rf_event
+
+      state_topic: "viewroad-status/smokealarms/rf/event"
+
+      event_types:
+        - interconnect_start
+        - detector_test
+        - remote_test
+        - remote_hush
+        - smoke_alarm
+        - unknown_aj765
+        - interconnect_end
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:radio-tower
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Current Type"
+      unique_id: view_road_smoke_alarm_rf_current_type
+      default_entity_id: sensor.smoke_alarm_rf_current_type
+
+      state_topic: "viewroad-status/smokealarms/rf/current_type"
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:waveform
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Type"
+      unique_id: view_road_smoke_alarm_rf_last_type
+      default_entity_id: sensor.smoke_alarm_rf_last_type
+
+      state_topic: "viewroad-status/smokealarms/rf/last_type"
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:waveform
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Confidence"
+      unique_id: view_road_smoke_alarm_rf_last_confidence
+      default_entity_id: sensor.smoke_alarm_rf_last_confidence
+
+      state_topic: "viewroad-status/smokealarms/rf/last_confidence"
+      unit_of_measurement: "%"
+      state_class: measurement
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:percent
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Seen"
+      unique_id: view_road_smoke_alarm_rf_last_seen
+      default_entity_id: sensor.smoke_alarm_rf_last_seen
+
+      state_topic: "viewroad-status/smokealarms/rf/last_seen"
+      device_class: timestamp
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Duration"
+      unique_id: view_road_smoke_alarm_rf_last_duration
+      default_entity_id: sensor.smoke_alarm_rf_last_duration
+
+      state_topic: "viewroad-status/smokealarms/rf/last_duration"
+      unit_of_measurement: "s"
+      device_class: duration
+      state_class: measurement
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
Author	SHA1	Message	Date
zorruno	d1fea67cfe	various tidyups	2026-09-13 15:32:16 +12:00
ESPHome Device Builder	3ead85ef29	Edit esp-officeduallights.yaml	2026-09-13 11:19:34 +12:00
ESPHome Device Builder	2c22e6c07f	Edit esp-officeduallights.yaml	2026-09-13 11:18:37 +12:00
ESPHome Device Builder	25e73750dc	Edit esp-officelights.yaml	2026-09-13 11:18:12 +12:00
ESPHome Device Builder	e205b0db67	Edit esp-bedside-panel.yaml	2026-09-04 17:09:47 +12:00