various tidyups

.ha_run.lock

@@ -1 +1 @@
-{"pid": 70, "version": 1, "ha_version": "2026.8.1", "start_ts": 1786755431.7882934}
+{"pid": 71, "version": 1, "ha_version": "2026.9.2", "start_ts": 1789211351.1286738}

docs/tplink_deco_guest_wifi_recovery.txt

@@ -0,0 +1,67 @@
+TP-Link Deco Guest Wi-Fi Recovery Archive
+==========================================
+
+Version: 1.0.0
+Created: 2026-09-02
+Project: P026 Flounder downstairs guest-area controls
+
+Purpose
+-------
+
+This archive preserves the locally maintained TP-Link Deco Guest Wi-Fi
+customisation. The upstream tplink_deco integration does not provide this
+service or sensor. Reinstalling or overwriting custom_components/tplink_deco
+can remove them.
+
+Archive
+-------
+
+File: docs/tplink_deco_guest_wifi_recovery_2026-09-02.tgz
+SHA-256: 452ed7b7be5e8c469dc7740d5297959179204d24593a22c965f1915ca727c48d
+
+Contents
+--------
+
+- custom_components/tplink_deco/api.py
+- custom_components/tplink_deco/__init__.py
+- custom_components/tplink_deco/const.py
+- custom_components/tplink_deco/services.yaml
+- custom_components/tplink_deco/coordinator.py
+- custom_components/tplink_deco/binary_sensor.py
+- packages/tplink_deco_guest_wifi.yaml
+
+Behaviour Preserved
+-------------------
+
+- Service: tplink_deco.set_guest_network
+- Service field: enable (boolean)
+- Router state: binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network
+- Requested state: input_boolean.wifi_guest_network
+- Flounder control: the requested-state helper; the package reconciles it to
+  the router-confirmed sensor.
+- Write protocol: read each returned wireless band, retain its host, guest and
+  backhaul settings, set only guest.enable, add radio.channel from host.channel,
+  write each band separately, then read back and verify every written band.
+- Deco firmware can return a malformed successful response containing
+  {"error_code": 0}; the integration accepts that response only for writes and
+  relies on the read-back verification as the final confirmation.
+
+Recovery Procedure
+------------------
+
+1. Stop before updating, reinstalling, or deleting custom_components/tplink_deco.
+2. Verify the archive checksum above.
+3. Extract the archive from /homeassistant, preserving the listed paths.
+4. Run Home Assistant configuration validation and Python compilation for the
+   restored integration files.
+5. Restart Home Assistant. A restart is required for custom integration code.
+6. Confirm tplink_deco.set_guest_network is registered and the Guest Network
+   binary sensor is available before operating Guest Wi-Fi.
+
+Update Policy
+-------------
+
+Do not replace custom_components/tplink_deco with an upstream or HACS update
+without first comparing it to this archive and deliberately reapplying the
+Guest Wi-Fi customisation. The archive contains no credentials, tokens, session
+cookies, or router address.

esphome/esp-bedside-panel.yaml

@@ -6,6 +6,9 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedside-panel.yaml
 #:########################################################################################:#
 # VERSIONS:
+# V1.56 2026-09-04 Added latched blackout after 10 seconds below 1 lx with immediate exit
+# V1.55 2026-08-16 Show only Clock time and date in Blackout ambient-light mode
+# V1.54 2026-08-16 Dimmed Clock time and date palette in Blackout ambient-light mode
 # V1.53 2026-07-31 Expanded Jobs Summary to nine active jobs in a 3x4 grid with three spare slots
 # V1.52 2026-07-28 Centralised battery publishing and removed continuously evaluated battery template lambdas
 # V1.51 2026-07-28 Removed unsupported update_interval from the template USB-power binary sensor
@@ -246,7 +249,6 @@ substitutions:
   #   Bright light: approximately 642-643 lx
   ambient_lux_multiplier_default: "200"
 
-  display_blackout_lux_threshold_default: "2"
   display_dark_lux_threshold_default: "20"
   display_bright_lux_threshold_default: "250"
 
@@ -919,20 +921,6 @@ number:
     step: 5
     mode: box
 
-  - platform: template
-    id: display_blackout_lux_threshold
-    name: "${friendly_name} Blackout Lux Threshold"
-    icon: mdi:brightness-1
-    entity_category: config
-    optimistic: true
-    restore_value: true
-    initial_value: "${display_blackout_lux_threshold_default}"
-    unit_of_measurement: "lx"
-    min_value: 0
-    max_value: 20
-    step: 0.5
-    mode: box
-
   - platform: template
     id: display_dark_lux_threshold
     name: "${friendly_name} Dark Lux Threshold"
@@ -1239,6 +1227,36 @@ sensor:
       }
 
       return voltage * multiplier;
+    on_value:
+      then:
+        - if:
+            condition:
+              lambda: |-
+                return !isnan(x) && x >= 1.0f;
+            then:
+              - script.stop: latch_display_blackout
+              - lambda: |-
+                  id(display_blackout_active) = false;
+              - if:
+                  condition:
+                    lambda: |-
+                      return id(lvgl_ready) && id(display_is_dimmed);
+                  then:
+                    - script.execute: apply_dim_backlight
+                  else:
+                    - if:
+                        condition:
+                          lambda: |-
+                            return id(lvgl_ready);
+                        then:
+                          - script.execute: apply_active_backlight
+            else:
+              - if:
+                  condition:
+                    lambda: |-
+                      return !isnan(x) && x < 1.0f && !id(display_blackout_active);
+                  then:
+                    - script.execute: latch_display_blackout
 
   - platform: homeassistant
     id: moon_phase
@@ -1916,6 +1934,12 @@ globals:
     restore_value: false
     initial_value: "false"
 
+  # True after ambient light remains below 1 lx for 10 continuous seconds.
+  - id: display_blackout_active
+    type: bool
+    restore_value: false
+    initial_value: "false"
+
   # True only while the Security page is visible.
   - id: security_page_active
     type: bool
@@ -3140,6 +3164,83 @@ script:
   # The active and clock/idle brightness levels are independently adjustable
   # and restored after reboot.
 
+  - id: latch_display_blackout
+    mode: single
+    then:
+      - delay: 10s
+      - if:
+          condition:
+            lambda: |-
+              const float lux = id(ambient_light_illuminance).state;
+              return !isnan(lux) && lux < 1.0f;
+          then:
+            - lambda: |-
+                id(display_blackout_active) = true;
+            - if:
+                condition:
+                  lambda: |-
+                    return id(lvgl_ready) && id(display_is_dimmed);
+                then:
+                  - script.execute: apply_dim_backlight
+                else:
+                  - if:
+                      condition:
+                        lambda: |-
+                          return id(lvgl_ready);
+                      then:
+                        - script.execute: apply_active_backlight
+
+  # Keep the idle Clock unobtrusive at the minimum usable backlight level.
+  - id: apply_clock_blackout_palette
+    mode: restart
+    then:
+      - if:
+          condition:
+            lambda: |-
+              return id(display_blackout_active);
+
+          then:
+            - lvgl.label.update:
+                id: clock_time_label
+                text_color: 0x4A4742
+
+            - lvgl.label.update:
+                id: clock_date_label
+                text_color: 0x383632
+
+            - lvgl.widget.update:
+                id: clock_battery_icon_label
+                hidden: true
+
+            - lvgl.widget.update:
+                id: clock_battery_percent_label
+                hidden: true
+
+            - lvgl.widget.update:
+                id: clock_blackout_details_mask
+                hidden: false
+
+          else:
+            - lvgl.label.update:
+                id: clock_time_label
+                text_color: 0xE4DDD2
+
+            - lvgl.label.update:
+                id: clock_date_label
+                text_color: 0xA8A198
+
+            - lvgl.widget.update:
+                id: clock_battery_icon_label
+                hidden: false
+
+            - lvgl.widget.update:
+                id: clock_battery_percent_label
+                hidden: false
+
+            - lvgl.widget.update:
+                id: clock_blackout_details_mask
+                hidden: true
+
   - id: apply_active_backlight
     mode: restart
     then:
@@ -3151,20 +3252,14 @@ script:
           brightness: !lambda |-
             const float lux = id(ambient_light_illuminance).state;
 
-            float blackout_threshold =
-              id(display_blackout_lux_threshold).state;
             float dark_threshold =
               id(display_dark_lux_threshold).state;
             float bright_threshold =
               id(display_bright_lux_threshold).state;
 
-            if (isnan(blackout_threshold)) {
-              blackout_threshold = 2.0f;
-            }
-
             if (
               isnan(dark_threshold) ||
-              dark_threshold <= blackout_threshold
+              dark_threshold <= 0.0f
             ) {
               dark_threshold = 20.0f;
             }
@@ -3178,7 +3273,7 @@ script:
 
             float brightness_percent;
 
-            if (!isnan(lux) && lux < blackout_threshold) {
+            if (id(display_blackout_active)) {
               brightness_percent =
                 id(display_blackout_brightness).state;
               id(ambient_light_band_text).publish_state("Blackout");
@@ -3206,6 +3301,8 @@ script:
             return brightness_percent / 100.0f;
           transition_length: 150ms
 
+      - script.execute: apply_clock_blackout_palette
+
   - id: apply_dim_backlight
     mode: restart
     then:
@@ -3217,20 +3314,14 @@ script:
           brightness: !lambda |-
             const float lux = id(ambient_light_illuminance).state;
 
-            float blackout_threshold =
-              id(display_blackout_lux_threshold).state;
             float dark_threshold =
               id(display_dark_lux_threshold).state;
             float bright_threshold =
               id(display_bright_lux_threshold).state;
 
-            if (isnan(blackout_threshold)) {
-              blackout_threshold = 2.0f;
-            }
-
             if (
               isnan(dark_threshold) ||
-              dark_threshold <= blackout_threshold
+              dark_threshold <= 0.0f
             ) {
               dark_threshold = 20.0f;
             }
@@ -3244,7 +3335,7 @@ script:
 
             float brightness_percent;
 
-            if (!isnan(lux) && lux < blackout_threshold) {
+            if (id(display_blackout_active)) {
               brightness_percent =
                 id(display_blackout_brightness).state;
               id(ambient_light_band_text).publish_state("Blackout");
@@ -3272,6 +3363,8 @@ script:
             return brightness_percent / 100.0f;
           transition_length: 700ms
 
+      - script.execute: apply_clock_blackout_palette
+
   #:######################################################################################:#
   # BOTTOM NAVIGATION LIVE TIME
   #:######################################################################################:#
@@ -12819,3 +12912,16 @@ lvgl:
             text_font: font_small
             text_color: 0x887799
             clickable: false
+
+        # Blackout mode leaves only the time and date visible.
+        - obj:
+            id: clock_blackout_details_mask
+            x: 0
+            y: 430
+            width: 1024
+            height: 170
+            bg_color: 0x020304
+            bg_opa: COVER
+            border_width: 0
+            clickable: false
+            hidden: true

esphome/esp-officeduallights.yaml

@@ -6,6 +6,10 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officeduallights.yaml
 #:########################################################################################:#
 # VERSIONS:
+# V3.0 2026-09-12 Makes HA the primary Office synchronizer. Direct MQTT peer synchronization
+#                 runs only while HA's native API state subscription is disconnected.
+# V2.9 2026-08-16 Makes this physical relay the sole overhead status authority. Removes the
+#                 bidirectional shared retained-status topic that could chatter during reconnects.
 # V2.8 2026-07-25 Added 2-way MQTT sync with esp-officelights (office main lightswitch).
 #                 on_connect republishes retained status on MQTT reconnect. on_message
 #                 subscribes to main lightswitch command topics for offline HA-independent
@@ -91,7 +95,7 @@ substitutions:
 
   # Project Naming
   project_name: "Sonoff Technologies.Sonoff Dual R1"
-  project_version: "v2.8"
+  project_version: "v3.0"
 
   # Passwords and Secrets
   api_key: !secret esp-api_key
@@ -124,12 +128,6 @@ substitutions:
   mqtt_mainlight_function_overhead: "office-main-lights-right"
   mqtt_mainlight_command_overhead: "${mqtt_command_main_topic}/${mqtt_mainlight_function_overhead}"
 
-  # MQTT Overhead Status - shared topic for overhead state sync
-  # Both this device and esp-officelights publish and subscribe to this topic so
-  # whichever device's timer finishes first keeps the other in sync.
-  mqtt_shared_overhead_status_function: "office-overhead-status"
-  mqtt_shared_overhead_status_topic: "${mqtt_status_main_topic}/${mqtt_shared_overhead_status_function}"
-
   # MQTT Status/Command payloads
   mqtt_command_on: "On"
   mqtt_command_off: "Off"
@@ -237,23 +235,26 @@ mqtt:
         payload: !lambda |-
           return id(relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
         retain: true
-    - mqtt.publish:
-        topic: "${mqtt_shared_overhead_status_topic}"
-        payload: !lambda |-
-          return id(relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
-        retain: true
 
   on_message:
     - topic: "${mqtt_local_command1_topic}"
       payload: "On"
       then:
         - script.stop: relay_1_timer_script
+        - if:
+            condition:
+              lambda: "return !id(relay_1).state;"
+            then:
               - light.turn_on: light_1
 
     - topic: "${mqtt_local_command1_topic}"
       payload: "Off"
       then:
         - script.stop: relay_1_timer_script
+        - if:
+            condition:
+              lambda: "return id(relay_1).state;"
+            then:
               - light.turn_off: light_1
 
     - topic: "${mqtt_local_command1_topic}"
@@ -286,12 +287,20 @@ mqtt:
       payload: "On"
       then:
         - script.stop: relay_2_timer_script
+        - if:
+            condition:
+              lambda: "return !id(relay_2).state;"
+            then:
               - light.turn_on: light_2
 
     - topic: "${mqtt_local_command2_topic}"
       payload: "Off"
       then:
         - script.stop: relay_2_timer_script
+        - if:
+            condition:
+              lambda: "return id(relay_2).state;"
+            then:
               - light.turn_off: light_2
 
     - topic: "${mqtt_local_command2_topic}"
@@ -320,16 +329,19 @@ mqtt:
 
             id(relay_2_timer_script)->execute(timer_seconds * 1000);
 
-    # Mirror remote bunker command from esp-officelights onto light_1, but only if a real
-    # state change is needed. Do not republish the command from here. Relay status is
-    # published by the relay callback below.
+    # MQTT peer synchronization is the HA-down fallback. When HA is connected it is the
+    # sole synchronizer, so remote MQTT commands must not change either physical relay.
     - topic: "${mqtt_mainlight_command_bunker}"
       payload: "${mqtt_command_on}"
       then:
         - script.stop: relay_1_timer_script
         - if:
             condition:
-              lambda: "return !id(relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(relay_1).state;"
             then:
               - light.turn_on: light_1
 
@@ -339,19 +351,25 @@ mqtt:
         - script.stop: relay_1_timer_script
         - if:
             condition:
-              lambda: "return id(relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(relay_1).state;"
             then:
               - light.turn_off: light_1
 
-    # Mirror remote overhead command from esp-officelights onto light_2, but only if a real
-    # state change is needed.
     - topic: "${mqtt_mainlight_command_overhead}"
       payload: "${mqtt_command_on}"
       then:
         - script.stop: relay_2_timer_script
         - if:
             condition:
-              lambda: "return !id(relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(relay_2).state;"
             then:
               - light.turn_on: light_2
 
@@ -361,29 +379,11 @@ mqtt:
         - script.stop: relay_2_timer_script
         - if:
             condition:
-              lambda: "return id(relay_2).state;"
-            then:
-              - light.turn_off: light_2
-
-    # Mirror shared overhead status from esp-officelights onto light_2. This handles the
-    # case where the main lightswitch's overhead timer finishes and turns off the overhead.
-    # State guards prevent ping-pong with the command topic handlers above.
-    - topic: "${mqtt_shared_overhead_status_topic}"
-      payload: "${mqtt_command_on}"
-      then:
-        - if:
-            condition:
-              lambda: "return !id(relay_2).state;"
-            then:
-              - light.turn_on: light_2
-
-    - topic: "${mqtt_shared_overhead_status_topic}"
-      payload: "${mqtt_command_off}"
-      then:
-        - script.stop: relay_2_timer_script
-        - if:
-            condition:
-              lambda: "return id(relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(relay_2).state;"
             then:
               - light.turn_off: light_2
 
@@ -498,10 +498,6 @@ switch:
           topic: "${mqtt_local_status2_topic}"
           payload: "On"
           retain: true
-      - mqtt.publish:
-          topic: "${mqtt_shared_overhead_status_topic}"
-          payload: "On"
-          retain: true
       - if:
           condition:
             switch.is_off: relay_1
@@ -514,10 +510,6 @@ switch:
           topic: "${mqtt_local_status2_topic}"
           payload: "Off"
           retain: true
-      - mqtt.publish:
-          topic: "${mqtt_shared_overhead_status_topic}"
-          payload: "Off"
-          retain: true
       - if:
           condition:
             switch.is_off: relay_1

esphome/esp-officelights.yaml

@@ -6,6 +6,10 @@
 # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officelights.yaml
 #:########################################################################################:#
 # VERSIONS:
+# v3.2 2026-09-12 Makes HA the primary Office synchronizer. Direct MQTT peer synchronization
+#                 runs only while HA's native API state subscription is disconnected.
+# v3.1 2026-08-16 Makes the Sonoff Dual the sole overhead status authority. Removes the
+#                 bidirectional shared retained-status topic that could chatter during reconnects.
 # v3.0 2026-07-25 Refactored MQTT sync to use template HA switch actions; physical button and
 #                 HA control now publish command topics to officeduallights; relay callbacks
 #                 publish status only to prevent command ping-pong/chattering. 2-way sync with
@@ -41,11 +45,11 @@
 # Overhead Lights (Button 2):
 # - Command topic: ${mqtt_this_device_command_topic_overhead}
 #   Payloads: ${mqtt_command_on}, ${mqtt_command_off}, or 1 to 3600 (timer seconds)
-# - Status topic: ${mqtt_this_device_status_topic_overhead}
-#   Payloads mirror the overhead virtual relay state and are published retained.
+# - Status topic: ${mqtt_dual_status_overhead_topic}
+#   Payloads are published by the Sonoff Dual physical relay and mirrored locally.
 #
 # This device subscribes to status topics from esp-officeduallights to mirror remote state.
-# Timer values from esp-occupancyoffice are handled locally (countdown runs on this device).
+# Timer values from esp-occupancyoffice are handled by the Sonoff Dual physical relay.
 # Physical button presses cancel any active timer before toggling.
 #:########################################################################################:#
 # OFFLINE NOTES:
@@ -79,7 +83,7 @@ substitutions:
 
   # Project Naming
   project_name: "Zemismart Technologies.KS-811 Triple"
-  project_version: "v3.0"
+  project_version: "v3.2"
 
   # Passwords & Secrets
   api_key: !secret esp-api_key
@@ -109,23 +113,17 @@ substitutions:
   mqtt_this_device_status_topic_bunker: "${mqtt_status_main_topic}/${mqtt_this_device_function_bunker}"
 
   # MQTT LOCAL Controls - Overhead Lights
-  # Command topics: this device publishes here when Button 2 or HA toggles overhead.
-  # Status topics:  this device publishes retained status here on virtual relay state changes.
-  #                 esp-officeduallights subscribes to mirror remote overhead state.
+  # Commands from Button 2 or HA are sent to the Sonoff Dual, which is the
+  # sole physical relay and status authority for this circuit.
   mqtt_this_device_function_overhead: "office-main-lights-right"
   mqtt_this_device_command_topic_overhead: "${mqtt_command_main_topic}/${mqtt_this_device_function_overhead}"
-  mqtt_this_device_status_topic_overhead: "${mqtt_status_main_topic}/${mqtt_this_device_function_overhead}"
+  mqtt_dual_status_overhead_function: "office-dual-lights-left"
+  mqtt_dual_status_overhead_topic: "${mqtt_status_main_topic}/${mqtt_dual_status_overhead_function}"
 
   # MQTT Status/Command payloads
   mqtt_command_on: "On"
   mqtt_command_off: "Off"
 
-  # MQTT Overhead Status - shared topic for overhead state sync
-  # Both this device and esp-officeduallights publish and subscribe to this topic so
-  # whichever device's timer finishes first keeps the other in sync.
-  mqtt_shared_overhead_status_function: "office-overhead-status"
-  mqtt_shared_overhead_status_topic: "${mqtt_status_main_topic}/${mqtt_shared_overhead_status_function}"
-
   # Switch/Relay/Button Naming
   switch_1_name: "Bunker Lights" # Physical relay (GPIO13) connected to bunker light load
   switch_2_name: "Overhead Lights" # Virtual mirror of esp-officeduallights overhead state
@@ -217,86 +215,62 @@ mqtt:
         payload: !lambda |-
           return id(Relay_1).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
         retain: true
-    - mqtt.publish:
-        topic: "${mqtt_this_device_status_topic_overhead}"
-        payload: !lambda |-
-          return id(Relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
-        retain: true
-    - mqtt.publish:
-        topic: "${mqtt_shared_overhead_status_topic}"
-        payload: !lambda |-
-          return id(Relay_2).state ? "${mqtt_command_on}" : "${mqtt_command_off}";
-        retain: true
 
   on_message:
-    # Mirror remote overhead command onto virtual Relay_2, but only if a real state change
-    # is needed. Do not republish the command from here. Relay status is published by the
-    # relay callback below.
+    # MQTT peer synchronization is the HA-down fallback. When HA is connected it is the
+    # sole synchronizer, so remote MQTT state must not change this mirror.
     - topic: "${mqtt_this_device_command_topic_overhead}"
       payload: "${mqtt_command_on}"
       then:
-        - script.stop: overhead_timer_script
         - if:
             condition:
-              lambda: "return !id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(Relay_2).state;"
             then:
               - switch.turn_on: Relay_2
 
     - topic: "${mqtt_this_device_command_topic_overhead}"
       payload: "${mqtt_command_off}"
       then:
-        - script.stop: overhead_timer_script
         - if:
             condition:
-              lambda: "return id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(Relay_2).state;"
             then:
               - switch.turn_off: Relay_2
 
-    - topic: "${mqtt_this_device_command_topic_overhead}"
-      then:
-        - lambda: |-
-            if (x.empty()) {
-              return;
-            }
-
-            bool numeric_payload = true;
-            for (char c : x) {
-              if (c < '0' || c > '9') {
-                numeric_payload = false;
-                break;
-              }
-            }
-
-            if (!numeric_payload) {
-              return;
-            }
-
-            const int timer_seconds = atoi(x.c_str());
-            if (timer_seconds < 1 || timer_seconds > 3600) {
-              return;
-            }
-
-            id(overhead_timer_script)->execute(timer_seconds * 1000);
-
-    # Mirror shared overhead status from esp-officeduallights onto virtual Relay_2.
-    # This handles the case where the dual lights' overhead timer finishes and turns off
-    # the overhead — the main lightswitch mirrors the state so its virtual relay stays
-    # in sync. State guards prevent ping-pong with the command topic handlers above.
-    - topic: "${mqtt_shared_overhead_status_topic}"
+    # Mirror the Sonoff Dual's physical overhead relay status onto virtual Relay_2.
+    # The main lightswitch never publishes this status, so a reconnect cannot create
+    # a feedback loop.
+    - topic: "${mqtt_dual_status_overhead_topic}"
       payload: "${mqtt_command_on}"
       then:
         - if:
             condition:
-              lambda: "return !id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(Relay_2).state;"
             then:
               - switch.turn_on: Relay_2
 
-    - topic: "${mqtt_shared_overhead_status_topic}"
+    - topic: "${mqtt_dual_status_overhead_topic}"
       payload: "${mqtt_command_off}"
       then:
         - if:
             condition:
-              lambda: "return id(Relay_2).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(Relay_2).state;"
             then:
               - switch.turn_off: Relay_2
 
@@ -308,7 +282,11 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: "return !id(Relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return !id(Relay_1).state;"
             then:
               - switch.turn_on: Relay_1
 
@@ -317,7 +295,11 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: "return id(Relay_1).state;"
+              and:
+                - not:
+                    api.connected:
+                      state_subscription_only: true
+                - lambda: "return id(Relay_1).state;"
             then:
               - switch.turn_off: Relay_1
 
@@ -384,6 +366,12 @@ script:
             lambda: "return !id(Relay_1).state;"
           then:
             - switch.turn_on: Relay_1
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
             - mqtt.publish:
                 topic: "${mqtt_this_device_command_topic_bunker}"
                 payload: "${mqtt_command_on}"
@@ -398,6 +386,12 @@ script:
             lambda: "return id(Relay_1).state;"
           then:
             - switch.turn_off: Relay_1
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
             - mqtt.publish:
                 topic: "${mqtt_this_device_command_topic_bunker}"
                 payload: "${mqtt_command_off}"
@@ -426,6 +420,12 @@ script:
             lambda: "return !id(Relay_2).state;"
           then:
             - switch.turn_on: Relay_2
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
             - mqtt.publish:
                 topic: "${mqtt_this_device_command_topic_overhead}"
                 payload: "${mqtt_command_on}"
@@ -440,6 +440,12 @@ script:
             lambda: "return id(Relay_2).state;"
           then:
             - switch.turn_off: Relay_2
+      - if:
+          condition:
+            not:
+              api.connected:
+                state_subscription_only: true
+          then:
             - mqtt.publish:
                 topic: "${mqtt_this_device_command_topic_overhead}"
                 payload: "${mqtt_command_off}"
@@ -468,16 +474,6 @@ script:
       - delay: !lambda "return timer_duration_ms;"
       - switch.turn_off: Relay_1
 
-  # Overhead timer script. Turns on immediately, waits for the duration, then turns off.
-  - id: overhead_timer_script
-    mode: restart
-    parameters:
-      timer_duration_ms: int
-    then:
-      - switch.turn_on: Relay_2
-      - delay: !lambda "return timer_duration_ms;"
-      - switch.turn_off: Relay_2
-
 #:########################################################################################:#
 # BINARY SENSORS
 # https://esphome.io/components/binary_sensor/
@@ -566,32 +562,14 @@ switch:
           payload: "${mqtt_command_off}"
           retain: true
 
-  # Virtual Relay 2 (Overhead Lights mirror). No physical load connected. Mirrors the state
-  # of esp-officeduallights overhead light via MQTT status subscription.
+  # Virtual Relay 2 (Overhead Lights mirror). No physical load connected. Mirrors the
+  # Sonoff Dual's physical overhead relay via its one-way MQTT status topic.
   - platform: gpio
     name: "Internal Relay 2: ${switch_2_name}"
     internal: true
     pin: GPIO12
     id: Relay_2
     restore_mode: ${relay_restore_mode}
-    on_turn_on:
-      - mqtt.publish:
-          topic: "${mqtt_this_device_status_topic_overhead}"
-          payload: "${mqtt_command_on}"
-          retain: true
-      - mqtt.publish:
-          topic: "${mqtt_shared_overhead_status_topic}"
-          payload: "${mqtt_command_on}"
-          retain: true
-    on_turn_off:
-      - mqtt.publish:
-          topic: "${mqtt_this_device_status_topic_overhead}"
-          payload: "${mqtt_command_off}"
-          retain: true
-      - mqtt.publish:
-          topic: "${mqtt_shared_overhead_status_topic}"
-          payload: "${mqtt_command_off}"
-          retain: true
 
   # Relay 3 (Spare) - no function assigned
   - platform: gpio

esphome/patch

@@ -0,0 +1,223 @@
+--- a/esp-bedside-panel.yaml
++++ b/esp-bedside-panel.yaml
+@@ -5,6 +5,7 @@
+ # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-bedside-panel.yaml
+ #:########################################################################################:#
+ # VERSIONS:
++# V1.56 2026-09-04 Added latched blackout after 10 seconds below 1 lx with immediate exit
+ # V1.55 2026-08-16 Show only Clock time and date in Blackout ambient-light mode
+ # V1.54 2026-08-16 Dimmed Clock time and date palette in Blackout ambient-light mode
+@@ -248,7 +249,6 @@
+ #   Bright light: approximately 642-643 lx
+   ambient_lux_multiplier_default: "200"
+-
+-  display_blackout_lux_threshold_default: "2"
+   display_dark_lux_threshold_default: "20"
+   display_bright_lux_threshold_default: "250"
+@@ -921,21 +921,6 @@
+     step: 5
+     mode: box
+ 
+-  - platform: template
+-    id: display_blackout_lux_threshold
+-    name: "${friendly_name} Blackout Lux Threshold"
+-    icon: mdi:brightness-1
+-    entity_category: config
+-    optimistic: true
+-    restore_value: true
+-    initial_value: "${display_blackout_lux_threshold_default}"
+-    unit_of_measurement: "lx"
+-    min_value: 0
+-    max_value: 20
+-    step: 0.5
+-    mode: box
+-
+   - platform: template
+     id: display_dark_lux_threshold
+@@ -1228,6 +1213,45 @@
+     update_interval: 3s
+     lambda: |-
+       const float voltage = id(ambient_light_voltage).state;
++
++      if (isnan(voltage)) {
++        return NAN;
++      }
++
++      float multiplier = id(ambient_lux_multiplier).state;
++
++      if (isnan(multiplier) || multiplier <= 0.0f) {
++        multiplier = 200.0f;
++      }
++
++      return voltage * multiplier;
++    on_value:
++      then:
++        - if:
++            condition:
++              lambda: |-
++                return !isnan(x) && x >= 1.0f;
++            then:
++              - script.stop: latch_display_blackout
++              - lambda: |-
++                  id(display_blackout_active) = false;
++              - if:
++                  condition:
++                    lambda: |-
++                      return id(lvgl_ready) && id(display_is_dimmed);
++                  then:
++                    - script.execute: apply_dim_backlight
++                  else:
++                    - if:
++                        condition:
++                          lambda: |-
++                            return id(lvgl_ready);
++                        then:
++                          - script.execute: apply_active_backlight
++            else:
++              - if:
++                  condition:
++                    lambda: |-
++                      return !isnan(x) && x < 1.0f && !id(display_blackout_active);
++                  then:
++                    - script.execute: latch_display_blackout
+-      float multiplier = id(ambient_lux_multiplier).state;
+-
+-      if (isnan(voltage)) {
+-        return NAN;
+-      }
+-
+-      if (isnan(multiplier) || multiplier <= 0.0f) {
+-        multiplier = 200.0f;
+-      }
+-
+-      return voltage * multiplier;
+ 
+   - platform: homeassistant
+@@ -1918,6 +1942,12 @@
+     restore_value: false
+     initial_value: "false"
+ 
++  # True after ambient light remains below 1 lx for 10 continuous seconds.
++  - id: display_blackout_active
++    type: bool
++    restore_value: false
++    initial_value: "false"
++
+   # True only while the Security page is visible.
+@@ -3133,31 +3163,52 @@
+-  # Four ambient ranges are used:
+-  #   Blackout: lux < Blackout Lux Threshold
+-  #   Dark:     Blackout threshold to Dark Lux Threshold
+-  #   Normal:   between Dark and Bright thresholds
+-  #   Bright:   lux >= Bright Lux Threshold
++  # Blackout latches after ambient light remains below 1 lx for 10 seconds and
++  # exits immediately when ambient light reaches 1 lx. The remaining ranges are:
++  #   Dark:   lux <= Dark Lux Threshold
++  #   Normal: between Dark and Bright thresholds
++  #   Bright: lux >= Bright Lux Threshold
+   #
+   # The active and clock/idle brightness levels are independently adjustable
+   # and restored after reboot.
+ 
++  - id: latch_display_blackout
++    mode: single
++    then:
++      - delay: 10s
++      - if:
++          condition:
++            lambda: |-
++              const float lux = id(ambient_light_illuminance).state;
++              return !isnan(lux) && lux < 1.0f;
++          then:
++            - lambda: |-
++                id(display_blackout_active) = true;
++            - if:
++                condition:
++                  lambda: |-
++                    return id(lvgl_ready) && id(display_is_dimmed);
++                then:
++                  - script.execute: apply_dim_backlight
++                else:
++                  - if:
++                      condition:
++                        lambda: |-
++                          return id(lvgl_ready);
++                      then:
++                        - script.execute: apply_active_backlight
++
+   # Keep the idle Clock unobtrusive at the minimum usable backlight level.
+   - id: apply_clock_blackout_palette
+@@ -3146,15 +3197,7 @@
+       - if:
+           condition:
+             lambda: |-
+-              const float lux = id(ambient_light_illuminance).state;
+-              float blackout_threshold =
+-                id(display_blackout_lux_threshold).state;
+-
+-              if (isnan(blackout_threshold)) {
+-                blackout_threshold = 2.0f;
+-              }
+-
+-              return !isnan(lux) && lux < blackout_threshold;
++              return id(display_blackout_active);
+@@ -3212,22 +3255,12 @@
+           brightness: !lambda |-
+             const float lux = id(ambient_light_illuminance).state;
+ 
+-            float blackout_threshold =
+-              id(display_blackout_lux_threshold).state;
+             float dark_threshold =
+               id(display_dark_lux_threshold).state;
+             float bright_threshold =
+               id(display_bright_lux_threshold).state;
+ 
+-            if (isnan(blackout_threshold)) {
+-              blackout_threshold = 2.0f;
+-            }
+-
+             if (
+               isnan(dark_threshold) ||
+-              dark_threshold <= blackout_threshold
++              dark_threshold <= 0.0f
+             ) {
+               dark_threshold = 20.0f;
+             }
+@@ -3239,7 +3272,7 @@
+ 
+             float brightness_percent;
+ 
+-            if (!isnan(lux) && lux < blackout_threshold) {
++            if (id(display_blackout_active)) {
+               brightness_percent =
+                 id(display_blackout_brightness).state;
+@@ -3280,22 +3313,12 @@
+           brightness: !lambda |-
+             const float lux = id(ambient_light_illuminance).state;
+ 
+-            float blackout_threshold =
+-              id(display_blackout_lux_threshold).state;
+             float dark_threshold =
+               id(display_dark_lux_threshold).state;
+             float bright_threshold =
+               id(display_bright_lux_threshold).state;
+ 
+-            if (isnan(blackout_threshold)) {
+-              blackout_threshold = 2.0f;
+-            }
+-
+             if (
+               isnan(dark_threshold) ||
+-              dark_threshold <= blackout_threshold
++              dark_threshold <= 0.0f
+             ) {
+               dark_threshold = 20.0f;
+             }
+@@ -3307,7 +3330,7 @@
+ 
+             float brightness_percent;
+ 
+-            if (!isnan(lux) && lux < blackout_threshold) {
++            if (id(display_blackout_active)) {
+               brightness_percent =
+                 id(display_blackout_brightness).state;

packages/Appliance_Monitoring/appliance_monitor_processor.yaml

@@ -2,8 +2,8 @@
 # PACKAGE: Appliance Monitor Processor
 ################################################################################
 #
-# Version: 1.5
-# Date: 2026-07-26
+# Version: 1.7
+# Date: 2026-08-17
 #
 # Purpose:
 #   Shared appliance power monitoring processor.
@@ -29,7 +29,7 @@
 #   operating_power_min: 12
 #   paid_tariff_start: "00:00"
 #   paid_tariff_end: "21:00"
-#   paid_tariff_cost: 0.2023
+#   paid_tariff_cost: sensor.electricity_paid_rate (fallback 0.33235)
 #   offpeak_tariff_cost: 0.0
 #   max_sample_gap_seconds: 900
 #   min_cycle_notify_seconds: 300
@@ -41,6 +41,14 @@
 #   Finished
 #
 # Notes:
+#   Version 1.7:
+#     - Use the central GST-inclusive electricity paid-rate sensor.
+#     - Update the fallback tariff from NZ$0.2023/kWh to NZ$0.33235/kWh.
+#
+#   Version 1.6:
+#     - Preserve an explicit false power_available value instead of replacing
+#       it with the default true value.
+#
 #   Version 1.5:
 #     - Standardized Sony TV and Pushover appliance notification titles as
 #       "Appliance Notification".
@@ -248,13 +256,21 @@ script:
 
           am_paid_tariff_start: "{{ paid_tariff_start | default('00:00', true) | string }}"
           am_paid_tariff_end: "{{ paid_tariff_end | default('21:00', true) | string }}"
-          am_paid_tariff_cost: "{{ paid_tariff_cost | default(0.2023, true) | float(0.2023) }}"
+          am_paid_tariff_cost: >-
+            {{
+              paid_tariff_cost
+              | default(
+                  states('sensor.electricity_paid_rate') | float(0.33235),
+                  true
+                )
+              | float(0.33235)
+            }}
           am_offpeak_tariff_cost: "{{ offpeak_tariff_cost | default(0.0, true) | float(0.0) }}"
 
           am_max_sample_gap_seconds: "{{ max_sample_gap_seconds | default(900, true) | int(900) }}"
           am_min_cycle_notify_seconds: "{{ min_cycle_notify_seconds | default(300, true) | int(300) }}"
 
-          am_power_available: "{{ power_available | default(true, true) | bool(true) }}"
+          am_power_available: "{{ power_available | default(true) | bool(true) }}"
 
       ##########################################################################
       # ANNOUNCEMENT DEFAULTS AND PASSED VALUES
@@ -537,7 +553,7 @@ script:
 
           am_tariff_rate: >-
             {% if am_is_paid_interval | bool(false) %}
-              {{ am_paid_tariff_cost | float(0.2023) }}
+              {{ am_paid_tariff_cost | float(0.33235) }}
             {% else %}
               {{ am_offpeak_tariff_cost | float(0.0) }}
             {% endif %}
@@ -679,7 +695,7 @@ script:
             {% endif %}
 
           am_cycle_offpeak_savings: >-
-            {% set val = ((am_cycle_energy_new_kwh | float(0)) * (am_paid_tariff_cost | float(0.2023))) - (am_cycle_cost_new | float(0)) %}
+            {% set val = ((am_cycle_energy_new_kwh | float(0)) * (am_paid_tariff_cost | float(0.33235))) - (am_cycle_cost_new | float(0)) %}
             {{ ([0, val] | max) | round(4) }}
 
           am_cycle_offpeak_savings_formatted: >-

packages/Appliance_Monitoring/appliances_status_monitoring.yaml

@@ -6,7 +6,7 @@
 #   appliances_status_monitoring.yaml
 #
 # VERSION:
-#   V1.5 2026-07-11
+#   V1.8 2026-08-15
 #
 # PURPOSE:
 #   Appliance status monitoring package for multiple appliances.
@@ -51,6 +51,11 @@
 #       matrix_indicator.
 #
 # VERSION HISTORY:
+#   V1.8 2026-08-15
+#     - Skip appliance processing while its power source is unavailable.
+#     - Preserve retained cycle state and rolling samples across HA restarts and
+#       source reconnects instead of treating missing measurements as zero.
+#
 #   V1.7 2026-08-12
 #     - Enabled MQTT activity-feed publication for every monitored appliance.
 #
@@ -593,6 +598,10 @@ automation:
                 am_power_available: >-
                   {{ states(repeat.item.power_entity) not in ['unknown', 'unavailable'] }}
 
+            - if:
+                - condition: template
+                  value_template: "{{ am_power_available | bool(false) }}"
+              then:
                 - action: script.appliance_monitor_process_sample
                   data:
                     appliance_id: "{{ repeat.item.appliance_id }}"

packages/Lighting_2Way_Sync/office_lights_ha_fallback_sync.yaml

@@ -0,0 +1,58 @@
+#:########################################################################################:#
+# PACKAGE: Office Lights Home Assistant Fallback Synchronization
+# FILE:    Lighting_2Way_Sync/office_lights_ha_fallback_sync.yaml
+# VERSION: v1.2.0
+# DATE:    2026-09-12
+#:########################################################################################:#
+#
+# PURPOSE:
+#   Provides Home Assistant-primary synchronization for the Office two-way
+#   light controls. Direct MQTT peer control is the HA-down transport.
+#
+# OPERATION:
+#   - Synchronizes the Office bunker and overhead control pairs in both directions.
+#   - ESPHome permits direct MQTT peer synchronization only while HA's native
+#     API state subscription is disconnected, preventing competing controllers.
+#   - Does not reconcile state during Home Assistant startup, preventing a stale
+#     restored entity state from changing a physical light.
+#
+# DEPENDENCIES:
+#   - Blueprint: zorruno/two_three_way_sync.yaml
+#   - esp-officelights v3.2 and esp-officeduallights v3.0 or later.
+#
+# VERSION HISTORY:
+#   - v1.2.0 (2026-09-12): Enable after guarded HA-primary firmware deployment.
+#   - v1.1.0 (2026-09-12): Disabled until guarded HA-primary firmware deployment.
+#   - v1.0.0 (2026-08-16): Initial MQTT-down HA fallback for Office lights.
+#:########################################################################################:#
+
+automation:
+  #:##########################################################################:#
+  # BUNKER LIGHTS
+  #:##########################################################################:#
+  - id: office_bunker_lights_ha_fallback_sync
+    alias: "Office Bunker Lights HA Fallback Sync"
+    initial_state: true
+    use_blueprint:
+      path: zorruno/two_three_way_sync.yaml
+      input:
+        members:
+          - switch.office_office_main_lightswitch_3_relay_1_bunker_lights
+          - light.esp_officeduallights_light_1_right_hand_bunker_light
+        sync_on_start: false
+        startup_delay: 5
+
+  #:##########################################################################:#
+  # OVERHEAD LIGHTS
+  #:##########################################################################:#
+  - id: office_overhead_lights_ha_fallback_sync
+    alias: "Office Overhead Lights HA Fallback Sync"
+    initial_state: true
+    use_blueprint:
+      path: zorruno/two_three_way_sync.yaml
+      input:
+        members:
+          - switch.office_office_main_lightswitch_3_relay_2_overhead_lights
+          - light.esp_officeduallights_light_2_cool_white_overhead_lights
+        sync_on_start: false
+        startup_delay: 5

packages/Lighting_2Way_Sync/office_lights_ha_fallback_sync.yaml.bak

@@ -0,0 +1,57 @@
+#:########################################################################################:#
+# PACKAGE: Office Lights Home Assistant Fallback Synchronization
+# FILE:    Lighting_2Way_Sync/office_lights_ha_fallback_sync.yaml
+# VERSION: v1.1.0
+# DATE:    2026-09-12
+#:########################################################################################:#
+#
+# PURPOSE:
+#   Provides the Home Assistant API transport for Office two-way light control
+#   when MQTT is unavailable. Direct MQTT remains the HA-down transport.
+#
+# OPERATION:
+#   - Synchronizes the Office bunker and overhead control pairs in both directions.
+#   - The automations remain disabled until both ESPHome devices enforce the
+#     HA-primary/MQTT-fallback authority boundary.
+#   - Does not reconcile state during Home Assistant startup, preventing a stale
+#     restored entity state from changing a physical light.
+#
+# DEPENDENCIES:
+#   - Blueprint: zorruno/two_three_way_sync.yaml
+#   - esp-officelights and esp-officeduallights native ESPHome API connections.
+#
+# VERSION HISTORY:
+#   - v1.1.0 (2026-09-12): Disable until guarded HA-primary firmware is deployed.
+#   - v1.0.0 (2026-08-16): Initial MQTT-down HA fallback for Office lights.
+#:########################################################################################:#
+
+automation:
+  #:##########################################################################:#
+  # BUNKER LIGHTS
+  #:##########################################################################:#
+  - id: office_bunker_lights_ha_fallback_sync
+    alias: "Office Bunker Lights HA Fallback Sync"
+    initial_state: false
+    use_blueprint:
+      path: zorruno/two_three_way_sync.yaml
+      input:
+        members:
+          - switch.office_office_main_lightswitch_3_relay_1_bunker_lights
+          - light.esp_officeduallights_light_1_right_hand_bunker_light
+        sync_on_start: false
+        startup_delay: 5
+
+  #:##########################################################################:#
+  # OVERHEAD LIGHTS
+  #:##########################################################################:#
+  - id: office_overhead_lights_ha_fallback_sync
+    alias: "Office Overhead Lights HA Fallback Sync"
+    initial_state: false
+    use_blueprint:
+      path: zorruno/two_three_way_sync.yaml
+      input:
+        members:
+          - switch.office_office_main_lightswitch_3_relay_2_overhead_lights
+          - light.esp_officeduallights_light_2_cool_white_overhead_lights
+        sync_on_start: false
+        startup_delay: 5

packages/Pool_Controls/pool_light_operation.yaml

@@ -9,9 +9,13 @@
 #   packages/Pool_Controls/pool_light_operation.yaml
 #
 # VERSION:
-#   V1.2 2026-07-20
+#   V1.3 2026-09-06
 #
 # VERSION HISTORY:
+#   V1.3 2026-09-06
+#     - Treat the colour selector's "0= OFF" as a true Operation Mode OFF and
+#       arm the midnight TIMER reset.
+#
 #   V1.2 2026-07-20
 #     - Corrected the documented package filename.
 #     - Documented the relationship with the native ESPHome controls.
@@ -151,6 +155,40 @@ automation:
         target:
           entity_id: input_boolean.timer_light_midnight_pending
 
+  - id: pool_light_schedule_timer_when_operation_mode_off
+    alias: "Pool Light - Schedule TIMER When Operation Mode Is OFF"
+    description: "Arms the midnight TIMER reset for direct Operation Mode OFF commands."
+    mode: single
+
+    trigger:
+      - platform: state
+        entity_id: select.esp_poollightpower2_operation_mode
+        to: "OFF"
+
+    action:
+      - action: input_boolean.turn_on
+        target:
+          entity_id: input_boolean.timer_light_midnight_pending
+
+  - id: pool_light_send_off_when_colour_off_selected
+    alias: "Pool Light - Send OFF When Colour Off Is Selected"
+    description: "Converts colour selector 0= OFF into Operation Mode OFF with midnight reset."
+    mode: restart
+
+    trigger:
+      - platform: state
+        entity_id: select.esp_poollightpower2_pool_light_mode
+        to: "0= OFF"
+
+    action:
+      - action: mqtt.publish
+        data:
+          topic: "viewroad-commands/poollight-timer/operation"
+          payload: "OFF"
+      - action: input_boolean.turn_on
+        target:
+          entity_id: input_boolean.timer_light_midnight_pending
+
   - id: pool_light_sync_ui_switch_with_real_output
     alias: "Pool Light - Sync UI Switch With Real Output"
     description: "Keeps the UI switch aligned with the real ESPHome pool light output without sending MQTT commands."

packages/alexa_tplink_actions.yaml

@@ -1,111 +0,0 @@
-#:########################################################################################:#
-# TP-Link Deco Guest Wi-Fi Package                                                        #
-#:########################################################################################:#
-#
-# TITLE:
-#   TP-Link Deco Guest Wi-Fi
-#
-# FILE:
-#   packages/alexa_tplink_actions.yaml
-#
-# VERSION:
-#   V2.1 2026-08-04
-#
-# VERSION HISTORY:
-#   V2.1 2026-08-04
-#     - Added sync automation so input_boolean.wifi_guest_network tracks the
-#       router's actual guest Wi-Fi status via the new guest-network
-#       binary sensor from the integration.
-#
-#   V2.0 2026-08-04
-#     - Switched from Alexa voice commands to direct Deco local API control.
-#     - Uses tplink_deco.set_guest_network service for reliable on/off.
-#
-#   V1.1 2026-07-20
-#     - Added structured documentation and automation descriptions.
-#
-#   V1.0
-#     - Initial Alexa-mediated TP-Link guest-network controls.
-#
-# PURPOSE:
-#   Enables or disables the TP-Link guest Wi-Fi network via the Deco's local
-#   API, using the tplink_deco custom integration's set_guest_network service.
-#
-# DEPENDENCIES:
-#   - tplink_deco integration must be configured and connected to the Deco.
-#   - input_boolean.wifi_guest_network is a UI-managed helper that represents
-#     the requested guest-network state.
-#   - binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network reports
-#     the actual guest-network state from the router and keeps the helper in
-#     sync.
-#
-# OPERATION NOTES:
-#   - The helper records requested state; the sync automation below then
-#     reconciles it against the router's actual state so the helper tracks
-#     the real guest-network status.
-#   - If the Deco API call fails, the helper can disagree with the
-#     actual guest-network state.
-#
-#:########################################################################################:#
-
-automation:
-  - alias: "Turn on the Wifi Guest Network"
-    description: "Enables the TP-Link Deco guest Wi-Fi network via local API."
-    mode: single
-    triggers:
-      - trigger: state
-        entity_id: input_boolean.wifi_guest_network
-        to: "on"
-    actions:
-      - action: tplink_deco.set_guest_network
-        data:
-          enable: true
-
-  - alias: "Turn off the Wifi Guest Network"
-    description: "Disables the TP-Link Deco guest Wi-Fi network via local API."
-    mode: single
-    triggers:
-      - trigger: state
-        entity_id: input_boolean.wifi_guest_network
-        to: "off"
-    actions:
-      - action: tplink_deco.set_guest_network
-        data:
-          enable: false
-
-  - alias: "Sync Wifi Guest Network button with actual status"
-    description: >
-      Reconciles input_boolean.wifi_guest_network against the router's actual
-      guest Wi-Fi state reported by the guest-network binary sensor, so the
-      button reflects real status (including changes made outside HA).
-    mode: single
-    triggers:
-      - trigger: state
-        entity_id: binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network
-        to: "on"
-      - trigger: state
-        entity_id: binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network
-        to: "off"
-    conditions:
-      - condition: template
-        value_template: >
-          {{ states('input_boolean.wifi_guest_network')
-             != states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') }}
-    actions:
-      - choose:
-          - conditions:
-              - condition: template
-                value_template: >
-                  {{ states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') == 'on' }}
-            sequence:
-              - action: input_boolean.turn_on
-                target:
-                  entity_id: input_boolean.wifi_guest_network
-          - conditions:
-              - condition: template
-                value_template: >
-                  {{ states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') == 'off' }}
-            sequence:
-              - action: input_boolean.turn_off
-                target:
-                  entity_id: input_boolean.wifi_guest_network

packages/battery_notes_alerts.yaml

@@ -0,0 +1,636 @@
+#:########################################################################################:#
+# Battery Notes Alerts Package                                                           #
+#:########################################################################################:#
+#
+# TITLE:
+#   Battery Notes Alerts
+#
+# FILE:
+#   packages/battery_notes_alerts.yaml
+#
+# VERSION:
+#   V1.1.0 2026-08-26
+#
+# PURPOSE:
+#   Sends immediate Pushover alerts when a non-temporary Battery Notes device newly
+#   reports a low battery or becomes unavailable, plus a Thursday weekly digest.
+#
+#   Immediate alerts are limited to one alert of each type per device per calendar day.
+#
+# SAFETY / PERFORMANCE DESIGN:
+#   - No automation-level templated variables.
+#   - Low battery detection uses the native Battery Notes threshold event.
+#   - Weekly Battery Notes checks use raise_events: false.
+#   - Immediate automations never scan all Home Assistant states.
+#   - Immediate automations never call device_entities().
+#   - The offline watcher does only cheap filtering on state_changed events.
+#   - Offline alerts are inhibited for 10 minutes after Home Assistant starts.
+#   - Weekly list processing is bounded to 100 returned items per category.
+#   - Devices with "Temporary" anywhere in the Battery Notes note are always ignored.
+#
+# CONTROLS:
+#   - input_boolean.battery_notes_alerts_master_enable
+#       Master enable/disable for all notifications from this package.
+#
+#   - Battery Notes - Immediate Low Alert
+#       May also be independently enabled/disabled in Automations.
+#
+#   - Battery Notes - Immediate Offline Alert
+#       May also be independently enabled/disabled in Automations.
+#
+#   - Battery Notes - Weekly Digest
+#       May also be independently enabled/disabled in Automations.
+#
+# OPERATION:
+#   - LOW:
+#       Native Battery Notes threshold event only.
+#       Reminder-generated events are ignored.
+#       Maximum one low alert per device per calendar day.
+#
+#   - OFFLINE:
+#       Battery Notes Battery+ entities changing from a valid state to
+#       unknown/unavailable.
+#       Suppressed for 10 minutes after Home Assistant starts.
+#       Maximum one offline alert per device per calendar day.
+#
+#   - WEEKLY:
+#       Thursday at 19:00.
+#       Reports current low batteries and batteries not reporting for 2+ days.
+#       Battery Notes devices marked Temporary are excluded.
+#
+# DEPENDENCIES:
+#   - Battery Notes integration
+#   - packages/view_road_announcement_router.yaml
+#
+# VERSION HISTORY:
+#   - V1.1.0 2026-08-26: Complete redesign using native Battery Notes events/actions.
+#                         Removes high-frequency state scanning and top-level templates.
+#                         Adds Temporary filtering, daily per-device alert suppression,
+#                         startup offline suppression and master enable control.
+#   - V1.0.2 2026-08-25: RETIRED - unsafe high-frequency architecture.
+#   - V1.0.1 2026-08-25: RETIRED - unsafe high-frequency architecture.
+#   - V1.0.0 2026-08-25: RETIRED - unsafe high-frequency architecture.
+#
+#:########################################################################################:#
+
+
+#:########################################################################################:#
+# HELPERS                                                                                #
+#:########################################################################################:#
+
+input_boolean:
+
+  # Master safety switch.
+  #
+  # No "initial" value is specified intentionally:
+  #   - First creation defaults to OFF.
+  #   - Thereafter Home Assistant restores the previous state.
+  battery_notes_alerts_master_enable:
+    name: "Battery Notes Alerts - Master Enable"
+    icon: mdi:battery-alert
+
+  # Internal startup guard.
+  #
+  # This MUST start false on every Home Assistant restart.
+  battery_notes_offline_alerts_armed:
+    name: "Battery Notes Alerts - Offline Armed"
+    icon: mdi:shield-clock
+    initial: false
+
+
+input_text:
+
+  # Daily de-duplication caches.
+  #
+  # Format:
+  #   YYYY-MM-DD|xxxxxxxxxx|xxxxxxxxxx|...
+  #
+  # Only the final 10 characters of the device identifier are stored.
+  # A maximum of the 20 most recent device tokens is retained.
+  #
+  # No initial value is set so the cache survives Home Assistant restarts.
+  battery_notes_low_alert_cache:
+    name: "Battery Notes - Low Alert Cache"
+    max: 255
+    icon: mdi:battery-alert-variant
+
+  battery_notes_offline_alert_cache:
+    name: "Battery Notes - Offline Alert Cache"
+    max: 255
+    icon: mdi:battery-off-outline
+
+
+#:########################################################################################:#
+# AUTOMATIONS                                                                            #
+#:########################################################################################:#
+
+automation:
+
+  #:######################################################################################:#
+  # Offline Alert Startup Guard                                                           #
+  #:######################################################################################:#
+
+  - id: battery_notes_arm_offline_alerts
+    alias: "Battery Notes - Arm Offline Alerts"
+    description: >
+      Arms Battery Notes offline notifications 10 minutes after Home Assistant starts.
+      This prevents normal startup/integration initialisation from being interpreted as
+      devices suddenly going offline.
+    mode: restart
+
+    triggers:
+      - trigger: homeassistant
+        event: start
+
+    actions:
+      - action: input_boolean.turn_off
+        target:
+          entity_id: input_boolean.battery_notes_offline_alerts_armed
+
+      - delay: "00:10:00"
+
+      - action: input_boolean.turn_on
+        target:
+          entity_id: input_boolean.battery_notes_offline_alerts_armed
+
+
+  #:######################################################################################:#
+  # Immediate Low Battery Alert                                                          #
+  #:######################################################################################:#
+
+  - id: battery_notes_immediate_low_alert
+    alias: "Battery Notes - Immediate Low Alert"
+    description: >
+      Sends one immediate Pushover alert when a non-temporary Battery Notes device
+      genuinely crosses into its low-battery state. Reminder-generated Battery Notes
+      events are ignored. A device can generate at most one low alert per calendar day.
+    mode: queued
+    max: 10
+
+    triggers:
+      - trigger: event
+        event_type: battery_notes_battery_threshold
+        event_data:
+          battery_low: true
+          reminder: false
+
+    conditions:
+
+      # Master control.
+      - condition: state
+        entity_id: input_boolean.battery_notes_alerts_master_enable
+        state: "on"
+
+      # Temporary Battery Notes devices must never generate notifications.
+      - condition: template
+        value_template: >-
+          {% set note = trigger.event.data.note | default('', true) | lower %}
+          {{ 'temporary' not in note }}
+
+      # Require some stable identifier for daily de-duplication.
+      - condition: template
+        value_template: >-
+          {{ (trigger.event.data.device_id | default('', true)) != ''
+             or (trigger.event.data.source_entity_id | default('', true)) != '' }}
+
+    actions:
+
+      # IMPORTANT:
+      # This de-duplication check is deliberately an ACTION condition rather than an
+      # automation-level condition. Because this automation is mode: queued, two events
+      # arriving together are serialised before checking/updating the cache.
+      - condition: template
+        value_template: >-
+          {% set identifier =
+               trigger.event.data.device_id | default('', true)
+               or trigger.event.data.source_entity_id | default('', true) %}
+          {% set token = identifier[-10:] %}
+          {% set today = now().date() | string %}
+          {% set cache = states('input_text.battery_notes_low_alert_cache') %}
+          {% set previous =
+               cache.split('|')[1:]
+               if cache.startswith(today ~ '|')
+               else [] %}
+          {{ token not in previous }}
+
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Battery Alert"
+          short_announcement: >-
+            {% set name =
+                 trigger.event.data.device_name
+                 | default('Unknown Battery Device', true) %}
+            {% set level =
+                 trigger.event.data.battery_level
+                 | default(-1, true)
+                 | float(-1) %}
+            {% set battery_type =
+                 trigger.event.data.battery_type_and_quantity
+                 | default('Not recorded', true) %}
+            New Alert: {{ name }}, Battery Low{% if level >= 0 %}
+            {{ level | round(0) | int }}%{% endif %} {{ battery_type }}
+          long_announcement: >-
+            {% set name =
+                 trigger.event.data.device_name
+                 | default('Unknown Battery Device', true) %}
+            {% set level =
+                 trigger.event.data.battery_level
+                 | default(-1, true)
+                 | float(-1) %}
+            {% set battery_type =
+                 trigger.event.data.battery_type_and_quantity
+                 | default('Not recorded', true) %}
+            New Alert: {{ name }}, Battery Low{% if level >= 0 %}
+            {{ level | round(0) | int }}%{% endif %} {{ battery_type }}
+
+      # Record this device only after the notification action has completed.
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.battery_notes_low_alert_cache
+        data:
+          value: >-
+            {% set identifier =
+                 trigger.event.data.device_id | default('', true)
+                 or trigger.event.data.source_entity_id | default('', true) %}
+            {% set token = identifier[-10:] %}
+            {% set today = now().date() | string %}
+            {% set cache = states('input_text.battery_notes_low_alert_cache') %}
+            {% set previous =
+                 cache.split('|')[1:]
+                 if cache.startswith(today ~ '|')
+                 else [] %}
+            {% set updated = (previous + [token])[-20:] %}
+            {{ today ~ '|' ~ updated | join('|') }}
+
+
+  #:######################################################################################:#
+  # Immediate Offline Alert                                                              #
+  #:######################################################################################:#
+
+  - id: battery_notes_immediate_offline_alert
+    alias: "Battery Notes - Immediate Offline Alert"
+    description: >
+      Sends one immediate Pushover alert when a non-temporary Battery Notes Battery+
+      entity genuinely changes from an available state to unknown/unavailable.
+      Alerts are inhibited for the first 10 minutes after Home Assistant starts.
+      A device can generate at most one offline alert per calendar day.
+    mode: queued
+    max: 20
+
+    triggers:
+      - trigger: event
+        event_type: state_changed
+
+    conditions:
+
+      # Keep the first checks extremely cheap because state_changed is a global event.
+      - condition: state
+        entity_id: input_boolean.battery_notes_alerts_master_enable
+        state: "on"
+
+      - condition: state
+        entity_id: input_boolean.battery_notes_offline_alerts_armed
+        state: "on"
+
+      # Only Battery Notes generated Battery+ entities are interesting.
+      # No regex and no global state lookup is required.
+      - condition: template
+        value_template: >-
+          {% set entity_id = trigger.event.data.entity_id | default('', true) %}
+          {{ (entity_id.startswith('sensor.')
+               and entity_id.endswith('_battery_plus'))
+             or
+             (entity_id.startswith('binary_sensor.')
+               and entity_id.endswith('_battery_plus_low')) }}
+
+      # Require a genuine transition from available -> unavailable.
+      - condition: template
+        value_template: >-
+          {% set old = trigger.event.data.old_state %}
+          {% set new = trigger.event.data.new_state %}
+          {{ old is not none
+             and new is not none
+             and old.state not in ['unknown', 'unavailable']
+             and new.state in ['unknown', 'unavailable'] }}
+
+      # Temporary devices are ignored.
+      #
+      # Prefer the new state's note but fall back to the old state's attributes because
+      # integrations do not always retain every attribute on an unavailable state.
+      - condition: template
+        value_template: >-
+          {% set old = trigger.event.data.old_state %}
+          {% set new = trigger.event.data.new_state %}
+          {% set note =
+               new.attributes.get(
+                 'note',
+                 old.attributes.get('note', '')
+               )
+               | default('', true)
+               | lower %}
+          {{ 'temporary' not in note }}
+
+    actions:
+
+      # As with low alerts, do this after entering the queued action sequence so two
+      # related Battery+ entities becoming unavailable together cannot both notify.
+      - condition: template
+        value_template: >-
+          {% set old = trigger.event.data.old_state %}
+          {% set new = trigger.event.data.new_state %}
+          {% set identifier =
+               new.attributes.get('device_id', '')
+               or old.attributes.get('device_id', '')
+               or new.entity_id %}
+          {% set token = identifier[-10:] %}
+          {% set today = now().date() | string %}
+          {% set cache = states('input_text.battery_notes_offline_alert_cache') %}
+          {% set previous =
+               cache.split('|')[1:]
+               if cache.startswith(today ~ '|')
+               else [] %}
+          {{ token not in previous }}
+
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Battery Alert"
+          short_announcement: >-
+            {% set old = trigger.event.data.old_state %}
+            {% set new = trigger.event.data.new_state %}
+            {% set name =
+                 new.attributes.get('device_name')
+                 or old.attributes.get('device_name')
+                 or new.attributes.get('friendly_name')
+                 or old.attributes.get('friendly_name')
+                 or new.name %}
+            {% set battery_type =
+                 new.attributes.get('battery_type_and_quantity')
+                 or old.attributes.get('battery_type_and_quantity')
+                 or 'Not recorded' %}
+            New Alert: {{ name }}, Battery Unavailable {{ battery_type }}
+          long_announcement: >-
+            {% set old = trigger.event.data.old_state %}
+            {% set new = trigger.event.data.new_state %}
+            {% set name =
+                 new.attributes.get('device_name')
+                 or old.attributes.get('device_name')
+                 or new.attributes.get('friendly_name')
+                 or old.attributes.get('friendly_name')
+                 or new.name %}
+            {% set battery_type =
+                 new.attributes.get('battery_type_and_quantity')
+                 or old.attributes.get('battery_type_and_quantity')
+                 or 'Not recorded' %}
+            New Alert: {{ name }}, Battery Unavailable {{ battery_type }}
+
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.battery_notes_offline_alert_cache
+        data:
+          value: >-
+            {% set old = trigger.event.data.old_state %}
+            {% set new = trigger.event.data.new_state %}
+            {% set identifier =
+                 new.attributes.get('device_id', '')
+                 or old.attributes.get('device_id', '')
+                 or new.entity_id %}
+            {% set token = identifier[-10:] %}
+            {% set today = now().date() | string %}
+            {% set cache = states('input_text.battery_notes_offline_alert_cache') %}
+            {% set previous =
+                 cache.split('|')[1:]
+                 if cache.startswith(today ~ '|')
+                 else [] %}
+            {% set updated = (previous + [token])[-20:] %}
+            {{ today ~ '|' ~ updated | join('|') }}
+
+
+  #:######################################################################################:#
+  # Weekly Digest                                                                        #
+  #:######################################################################################:#
+
+  - id: battery_notes_weekly_digest
+    alias: "Battery Notes - Weekly Digest"
+    description: >
+      Sends one Battery Notes summary every Thursday at 19:00. Reports current low
+      batteries and batteries which have not reported for at least two days.
+      Temporary Battery Notes devices are excluded.
+    mode: single
+
+    triggers:
+      - trigger: time
+        at: "19:00:00"
+
+    conditions:
+      - condition: time
+        weekday:
+          - thu
+
+      - condition: state
+        entity_id: input_boolean.battery_notes_alerts_master_enable
+        state: "on"
+
+    actions:
+
+      # IMPORTANT:
+      # raise_events MUST remain false.
+      #
+      # This retrieves the current low list without creating Battery Notes threshold
+      # reminder events.
+      - action: battery_notes.check_battery_low
+        data:
+          raise_events: false
+        response_variable: battery_low_response
+
+      # Ask Battery Notes for devices which have not reported for at least two days.
+      # Again, retrieve a response only; do not raise one event per device.
+      - action: battery_notes.check_battery_last_reported
+        data:
+          days_last_reported: 2
+          raise_events: false
+        response_variable: battery_report_response
+
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Weekly Battery Digest"
+          short_announcement: "Weekly Battery Digest"
+          long_announcement: >-
+            {# ------------------------------------------------------------------------- #}
+            {# Obtain response arrays.                                                  #}
+            {#                                                                          #}
+            {# check_battery_battery_low is confirmed from this HA installation.        #}
+            {# Two possible last-reported response keys are accepted defensively.       #}
+            {# ------------------------------------------------------------------------- #}
+
+            {% set low_items =
+                 battery_low_response.get(
+                   'check_battery_battery_low',
+                   battery_low_response.get('check_battery_low', [])
+                 ) %}
+
+            {% set report_items =
+                 battery_report_response.get(
+                   'check_battery_last_reported',
+                   battery_report_response.get(
+                     'check_battery_battery_last_reported',
+                     []
+                   )
+                 ) %}
+
+            {# ------------------------------------------------------------------------- #}
+            {# Resolve the Battery Notes note.                                          #}
+            {#                                                                          #}
+            {# The low action response on this installation does not include "note",    #}
+            {# so fall back to the attributes of Battery Notes entities.                #}
+            {# This lookup occurs ONCE PER WEEK ONLY and is bounded below.               #}
+            {# ------------------------------------------------------------------------- #}
+
+            {% macro battery_note(item) -%}
+              {% set ns =
+                   namespace(
+                     note=item.get('note', '') | default('', true)
+                   ) %}
+
+              {% if not ns.note %}
+                {% set item_device_id =
+                     item.get('device_id', '') | default('', true) %}
+                {% set item_source_id =
+                     item.get('source_entity_id', '') | default('', true) %}
+
+                {% for entity_id in integration_entities('battery_notes') %}
+                  {% if not ns.note %}
+                    {% set entity_device_id =
+                         state_attr(entity_id, 'device_id')
+                         | default('', true) %}
+                    {% set entity_source_id =
+                         state_attr(entity_id, 'source_entity_id')
+                         | default('', true) %}
+
+                    {% if
+                         (item_device_id
+                          and entity_device_id == item_device_id)
+                         or
+                         (item_source_id
+                          and entity_source_id == item_source_id) %}
+                      {% set found_note =
+                           state_attr(entity_id, 'note')
+                           | default('', true) %}
+                      {% if found_note %}
+                        {% set ns.note = found_note %}
+                      {% endif %}
+                    {% endif %}
+                  {% endif %}
+                {% endfor %}
+              {% endif %}
+
+              {{ ns.note }}
+            {%- endmacro %}
+
+            {# ------------------------------------------------------------------------- #}
+            {# Build bounded problem lists, excluding Temporary devices.                #}
+            {# ------------------------------------------------------------------------- #}
+
+            {% set summary = namespace(low=[], not_reporting=[]) %}
+
+            {% for item in low_items[:100] %}
+              {% set note = battery_note(item) | trim | lower %}
+
+              {% if 'temporary' not in note %}
+                {% set name =
+                     item.get('device_name', 'Unknown Battery Device')
+                     | default('Unknown Battery Device', true) %}
+                {% set level =
+                     item.get('battery_level', -1)
+                     | default(-1, true)
+                     | float(-1) %}
+                {% set battery_type =
+                     item.get('battery_type_and_quantity', 'Not recorded')
+                     | default('Not recorded', true) %}
+
+                {% if level >= 0 %}
+                  {% set line =
+                       name
+                       ~ ' - '
+                       ~ (level | round(0) | int)
+                       ~ '% - '
+                       ~ battery_type %}
+                {% else %}
+                  {% set line =
+                       name
+                       ~ ' - '
+                       ~ battery_type %}
+                {% endif %}
+
+                {% set summary.low = summary.low + [line] %}
+              {% endif %}
+            {% endfor %}
+
+            {% for item in report_items[:100] %}
+              {% set note = battery_note(item) | trim | lower %}
+
+              {% if 'temporary' not in note %}
+                {% set name =
+                     item.get('device_name', 'Unknown Battery Device')
+                     | default('Unknown Battery Device', true) %}
+                {% set days =
+                     item.get('battery_last_reported_days', 0)
+                     | default(0, true)
+                     | int(0) %}
+                {% set last_level =
+                     item.get('battery_last_reported_level', -1)
+                     | default(-1, true)
+                     | float(-1) %}
+                {% set battery_type =
+                     item.get('battery_type_and_quantity', 'Not recorded')
+                     | default('Not recorded', true) %}
+
+                {% if last_level >= 0 %}
+                  {% set line =
+                       name
+                       ~ ' - '
+                       ~ days
+                       ~ ' days - last '
+                       ~ (last_level | round(0) | int)
+                       ~ '% - '
+                       ~ battery_type %}
+                {% else %}
+                  {% set line =
+                       name
+                       ~ ' - '
+                       ~ days
+                       ~ ' days - '
+                       ~ battery_type %}
+                {% endif %}
+
+                {% set summary.not_reporting =
+                     summary.not_reporting + [line] %}
+              {% endif %}
+            {% endfor %}
+
+            Weekly Battery Digest
+
+            {% if summary.low %}
+            Low Battery: {{ summary.low | count }}
+            {% for line in summary.low %}
+            • {{ line }}
+            {% endfor %}
+            {% else %}
+            Low Battery: 0
+            {% endif %}
+
+            {% if summary.not_reporting %}
+            Not Reporting (2+ days): {{ summary.not_reporting | count }}
+            {% for line in summary.not_reporting %}
+            • {{ line }}
+            {% endfor %}
+            {% else %}
+            Not Reporting (2+ days): 0
+            {% endif %}
+
+            {% if not summary.low and not summary.not_reporting %}
+
+            All monitored Battery Notes devices are OK.
+            {% endif %}

packages/battery_notes_alerts.yaml.disabled

@@ -0,0 +1,195 @@
+#:########################################################################################:#
+# Battery Notes Alerts Package                                                           #
+#:########################################################################################:#
+#
+# TITLE:
+#   Battery Notes Alerts
+#
+# FILE:
+#   packages/battery_notes_alerts.yaml
+#
+# VERSION:
+#   V1.0.0 2026-08-25
+#
+# PURPOSE:
+#   Sends immediate and weekly Pushover alerts for non-temporary Battery Notes devices.
+#   Device lists are generated from Battery Notes at runtime, so adding a note starts
+#   monitoring the device without maintaining a second entity list.
+#
+# CONTROLS:
+#   - Battery Notes - Immediate Alert and Battery Notes - Weekly Digest are independent
+#     automation entities. Each can be enabled or disabled in Home Assistant Automations.
+#
+# DEPENDENCIES:
+#   - Battery Notes integration
+#   - packages/view_road_announcement_router.yaml
+#
+# VERSION HISTORY:
+#   - V1.0.0 2026-08-25: Initial immediate and Thursday weekly battery alerts.
+#
+#:########################################################################################:#
+
+automation:
+  - id: battery_notes_immediate_alert
+    alias: "Battery Notes - Immediate Alert"
+    description: >
+      Sends a Pushover alert when a monitored Battery Notes device newly reports
+      low battery or becomes unavailable. Temporary Battery Notes devices are ignored.
+    mode: queued
+    max: 10
+    triggers:
+      - trigger: event
+        event_type: state_changed
+    conditions:
+      - condition: template
+        value_template: >-
+          {{ trigger.event.data.entity_id is match('^(sensor|binary_sensor)\\..*_battery_plus(?:_low)?$') }}
+      - condition: template
+        value_template: >-
+          {% set old = trigger.event.data.old_state %}
+          {% set new = trigger.event.data.new_state %}
+          {{ old is not none
+             and new is not none
+             and old.state not in ['unknown', 'unavailable']
+             and old.state != new.state }}
+      - condition: template
+        value_template: >-
+          {% set note = trigger.event.data.new_state.attributes.note | default('', true) | lower %}
+          {{ trigger.event.data.new_state.attributes.device_id is defined
+             and 'temporary' not in note }}
+      - condition: template
+        value_template: >-
+          {% set old = trigger.event.data.old_state %}
+          {% set new = trigger.event.data.new_state %}
+          {% set device_id = new.attributes.device_id %}
+          {% set is_percentage = new.entity_id.startswith('sensor.') and new.entity_id.endswith('_battery_plus') %}
+          {% set companion = namespace(percentage=none) %}
+          {% for item in states %}
+            {% if item.attributes.device_id | default('') == device_id
+                  and item.entity_id.startswith('sensor.')
+                  and item.entity_id.endswith('_battery_plus') %}
+              {% set companion.percentage = item %}
+            {% endif %}
+          {% endfor %}
+          {% set source = companion.percentage if companion.percentage else new %}
+          {% set qualitative_id = source.entity_id
+             | replace('_battery_plus_low', '_battery_state')
+             | replace('_battery_plus', '_battery_state') %}
+          {% set qualitative = states[qualitative_id] %}
+          {% set qualitative_available = qualitative is not none
+             and qualitative.state in ['high', 'medium', 'low'] %}
+          {% set newly_low = (new.attributes.battery_low | default(false))
+             and not (old.attributes.battery_low | default(false)) %}
+          {% set newly_binary_low = new.entity_id.startswith('binary_sensor.')
+             and new.state == 'on' %}
+          {% set newly_unavailable = new.state in ['unknown', 'unavailable']
+             and source.entity_id == new.entity_id
+             and not qualitative_available %}
+          {{ newly_low or newly_binary_low or newly_unavailable }}
+    variables:
+      alert_name: >-
+        {% set new = trigger.event.data.new_state %}
+        {{ new.attributes.device_name | default(new.attributes.friendly_name, true) | default(new.name, true) }}
+      alert_type: >-
+        {% set new = trigger.event.data.new_state %}
+        {{ new.attributes.battery_type_and_quantity | default('Not recorded', true) }}
+      alert_level: >-
+        {% set new = trigger.event.data.new_state %}
+        {% set device_id = new.attributes.device_id %}
+        {% set level = namespace(value=none) %}
+        {% for item in states %}
+          {% if item.attributes.device_id | default('') == device_id
+                and item.entity_id.startswith('sensor.')
+                and item.entity_id.endswith('_battery_plus')
+                and item.state not in ['unknown', 'unavailable'] %}
+            {% set level.value = item.state %}
+          {% endif %}
+        {% endfor %}
+        {{ level.value ~ '%' if level.value is not none else '' }}
+      alert_line: >-
+        {% set new = trigger.event.data.new_state %}
+        {% if new.state in ['unknown', 'unavailable'] %}
+          New Alert: {{ alert_name }}, Battery Unavailable {{ alert_type }}
+        {% else %}
+          New Alert: {{ alert_name }}, Battery Low {{ alert_level }} {{ alert_type }}
+        {% endif %}
+      alert_summary: &battery_notes_summary >-
+        {% set monitored = namespace(device_ids=[], low=[], unavailable=[]) %}
+        {% for item in states %}
+          {% set note = item.attributes.note | default('', true) | lower %}
+          {% set device_id = item.attributes.device_id | default('') %}
+          {% if item.entity_id is match('^(sensor|binary_sensor)\\..*_battery_plus(?:_low)?$')
+                and device_id
+                and 'temporary' not in note
+                and device_id not in monitored.device_ids %}
+            {% set monitored.device_ids = monitored.device_ids + [device_id] %}
+            {% set device = namespace(percentage=none, low_sensor=none) %}
+            {% for candidate in states %}
+              {% if candidate.attributes.device_id | default('') == device_id %}
+                {% if candidate.entity_id.startswith('sensor.') and candidate.entity_id.endswith('_battery_plus') %}
+                  {% set device.percentage = candidate %}
+                {% elif candidate.entity_id.startswith('binary_sensor.') and candidate.entity_id.endswith('_battery_plus_low') %}
+                  {% set device.low_sensor = candidate %}
+                {% endif %}
+              {% endif %}
+            {% endfor %}
+            {% set source = device.percentage if device.percentage else device.low_sensor %}
+            {% set qualitative_id = source.entity_id
+               | replace('_battery_plus_low', '_battery_state')
+               | replace('_battery_plus', '_battery_state') %}
+            {% set qualitative = states[qualitative_id] %}
+            {% set qualitative_state = qualitative.state if qualitative is not none else '' %}
+            {% set name = source.attributes.device_name
+               | default(source.attributes.friendly_name, true)
+               | default(source.name, true) %}
+            {% set battery_type = source.attributes.battery_type_and_quantity | default('Not recorded', true) %}
+            {% set low = source.attributes.battery_low | default(false)
+               or (device.low_sensor is not none and device.low_sensor.state == 'on')
+               or qualitative_state == 'low' %}
+            {% set unavailable = source.state in ['unknown', 'unavailable']
+               and qualitative_state not in ['high', 'medium', 'low'] %}
+            {% if low %}
+              {% set level = source.state ~ '%' if device.percentage is not none and source.state not in ['unknown', 'unavailable'] else '' %}
+              {% set monitored.low = monitored.low + [name ~ ' (' ~ level ~ (', ' if level else '') ~ battery_type ~ ')'] %}
+            {% endif %}
+            {% if unavailable %}
+              {% set monitored.unavailable = monitored.unavailable + [name ~ ' (' ~ battery_type ~ ')'] %}
+            {% endif %}
+          {% endif %}
+        {% endfor %}
+        Summary: {{ monitored.device_ids | count }} Battery Notes devices, {{ monitored.unavailable | count }} unavailable, {{ monitored.low | count }} battery low.
+        Low Battery Devices: {{ monitored.low | join(', ') if monitored.low else 'None' }}
+        Unavailable Devices: {{ monitored.unavailable | join(', ') if monitored.unavailable else 'None' }}
+    actions:
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Battery Alert"
+          short_announcement: "{{ alert_line }}"
+          long_announcement: >-
+            {{ alert_line }}
+
+            {{ alert_summary }}
+
+  - id: battery_notes_weekly_digest
+    alias: "Battery Notes - Weekly Digest"
+    description: >
+      Sends the Battery Notes health summary to Pushover every Thursday at 19:00.
+      Temporary Battery Notes devices are excluded.
+    mode: single
+    triggers:
+      - trigger: time
+        at: "19:00:00"
+    conditions:
+      - condition: time
+        weekday:
+          - thu
+    variables:
+      alert_summary: *battery_notes_summary
+    actions:
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Weekly Battery Digest"
+          short_announcement: "Weekly Battery Digest"
+          long_announcement: "{{ alert_summary }}"

packages/battery_notes_alerts.yaml.disabled.failed

@@ -0,0 +1,197 @@
+#:########################################################################################:#
+# Battery Notes Alerts Package                                                           #
+#:########################################################################################:#
+#
+# TITLE:
+#   Battery Notes Alerts
+#
+# FILE:
+#   packages/battery_notes_alerts.yaml
+#
+# VERSION:
+#   V1.0.1 2026-08-25
+#
+# PURPOSE:
+#   Sends immediate and weekly Pushover alerts for non-temporary Battery Notes devices.
+#   Device lists are generated from Battery Notes at runtime, so adding a note starts
+#   monitoring the device without maintaining a second entity list.
+#
+# CONTROLS:
+#   - Battery Notes - Immediate Alert and Battery Notes - Weekly Digest are independent
+#     automation entities. Each can be enabled or disabled in Home Assistant Automations.
+#
+# DEPENDENCIES:
+#   - Battery Notes integration
+#   - packages/view_road_announcement_router.yaml
+#
+# VERSION HISTORY:
+#   - V1.0.1 2026-08-25: Bound companion lookups and prevent oversized template output.
+#   - V1.0.0 2026-08-25: Initial immediate and Thursday weekly battery alerts.
+#
+#:########################################################################################:#
+
+automation:
+  - id: battery_notes_immediate_alert
+    alias: "Battery Notes - Immediate Alert"
+    description: >
+      Sends a Pushover alert when a monitored Battery Notes device newly reports
+      low battery or becomes unavailable. Temporary Battery Notes devices are ignored.
+    mode: single
+    max_exceeded: silent
+    triggers:
+      - trigger: event
+        event_type: state_changed
+    conditions:
+      - condition: template
+        value_template: >-
+          {{ trigger.event.data.entity_id is match('^(sensor|binary_sensor)\\..*_battery_plus(?:_low)?$') }}
+      - condition: template
+        value_template: >-
+          {% set old = trigger.event.data.old_state %}
+          {% set new = trigger.event.data.new_state %}
+          {{ old is not none
+             and new is not none
+             and old.state not in ['unknown', 'unavailable']
+             and old.state != new.state }}
+      - condition: template
+        value_template: >-
+          {% set new = trigger.event.data.new_state %}
+          {% set note = new.attributes.note | default('', true) | lower %}
+          {{ new.attributes.device_id | default('') | bool
+             and 'temporary' not in note }}
+      - condition: template
+        value_template: >-
+          {%- set old = trigger.event.data.old_state -%}
+          {%- set new = trigger.event.data.new_state -%}
+          {%- set device_id = new.attributes.device_id -%}
+          {%- set companions = namespace(percentage_id='', qualitative_id='') -%}
+          {%- for entity_id in device_entities(device_id) -%}
+            {%- if entity_id.startswith('sensor.') and entity_id.endswith('_battery_plus') -%}
+              {%- set companions.percentage_id = entity_id -%}
+            {%- elif entity_id.startswith('sensor.') and entity_id.endswith('_battery_state') -%}
+              {%- set companions.qualitative_id = entity_id -%}
+            {%- endif -%}
+          {%- endfor -%}
+          {%- set source_id = companions.percentage_id or new.entity_id -%}
+          {%- set qualitative_available = companions.qualitative_id
+             and states(companions.qualitative_id) in ['high', 'medium', 'low'] -%}
+          {%- set newly_low = new.attributes.battery_low | default(false)
+             and not old.attributes.battery_low | default(false) -%}
+          {%- set newly_binary_low = new.entity_id.startswith('binary_sensor.')
+             and new.state == 'on' -%}
+          {%- set newly_unavailable = new.state in ['unknown', 'unavailable']
+             and source_id == new.entity_id
+             and not qualitative_available -%}
+          {{ newly_low or newly_binary_low or newly_unavailable }}
+    variables:
+      alert_name: >-
+        {% set new = trigger.event.data.new_state %}
+        {{ new.attributes.device_name
+           | default(new.attributes.friendly_name, true)
+           | default(new.name, true) }}
+      alert_type: >-
+        {{ trigger.event.data.new_state.attributes.battery_type_and_quantity
+           | default('Not recorded', true) }}
+      alert_level: >-
+        {%- set device_id = trigger.event.data.new_state.attributes.device_id -%}
+        {%- set level = namespace(value='') -%}
+        {%- for entity_id in device_entities(device_id) -%}
+          {%- if entity_id.startswith('sensor.')
+                and entity_id.endswith('_battery_plus')
+                and states(entity_id) not in ['unknown', 'unavailable'] -%}
+            {%- set level.value = states(entity_id) -%}
+          {%- endif -%}
+        {%- endfor -%}
+        {{ level.value ~ '%' if level.value else '' }}
+      alert_line: >-
+        {% if trigger.event.data.new_state.state in ['unknown', 'unavailable'] %}
+          New Alert: {{ alert_name }}, Battery Unavailable {{ alert_type }}
+        {% else %}
+          New Alert: {{ alert_name }}, Battery Low {{ alert_level }} {{ alert_type }}
+        {% endif %}
+      alert_summary: &battery_notes_summary >-
+        {%- set monitored = namespace(device_ids=[], low=[], unavailable=[]) -%}
+        {%- for item in states -%}
+          {%- set note = item.attributes.note | default('', true) | lower -%}
+          {%- set device_id = item.attributes.device_id | default('') -%}
+          {%- if item.entity_id is match('^(sensor|binary_sensor)\\..*_battery_plus(?:_low)?$')
+                and device_id
+                and 'temporary' not in note
+                and device_id not in monitored.device_ids -%}
+            {%- set monitored.device_ids = monitored.device_ids + [device_id] -%}
+          {%- endif -%}
+        {%- endfor -%}
+        {%- for device_id in monitored.device_ids -%}
+          {%- set device = namespace(percentage_id='', low_id='', qualitative_id='') -%}
+          {%- for entity_id in device_entities(device_id) -%}
+            {%- if entity_id.startswith('sensor.') and entity_id.endswith('_battery_plus') -%}
+              {%- set device.percentage_id = entity_id -%}
+            {%- elif entity_id.startswith('binary_sensor.') and entity_id.endswith('_battery_plus_low') -%}
+              {%- set device.low_id = entity_id -%}
+            {%- elif entity_id.startswith('sensor.') and entity_id.endswith('_battery_state') -%}
+              {%- set device.qualitative_id = entity_id -%}
+            {%- endif -%}
+          {%- endfor -%}
+          {%- set source_id = device.percentage_id or device.low_id -%}
+          {%- set source_state = states(source_id) -%}
+          {%- set qualitative_state = states(device.qualitative_id) if device.qualitative_id else '' -%}
+          {%- set name = state_attr(source_id, 'device_name')
+             or state_attr(source_id, 'friendly_name')
+             or source_id -%}
+          {%- set battery_type = state_attr(source_id, 'battery_type_and_quantity')
+             or 'Not recorded' -%}
+          {%- set low = state_attr(source_id, 'battery_low') | default(false, true)
+             or (device.low_id and is_state(device.low_id, 'on'))
+             or qualitative_state == 'low' -%}
+          {%- set unavailable = source_state in ['unknown', 'unavailable']
+             and qualitative_state not in ['high', 'medium', 'low'] -%}
+          {%- if low -%}
+            {%- set level = source_state ~ '%'
+               if device.percentage_id and source_state not in ['unknown', 'unavailable']
+               else '' -%}
+            {%- set monitored.low = monitored.low
+               + [name ~ ' (' ~ level ~ (', ' if level else '') ~ battery_type ~ ')'] -%}
+          {%- endif -%}
+          {%- if unavailable -%}
+            {%- set monitored.unavailable = monitored.unavailable
+               + [name ~ ' (' ~ battery_type ~ ')'] -%}
+          {%- endif -%}
+        {%- endfor -%}
+        Summary: {{ monitored.device_ids | count }} Battery Notes devices,
+        {{ monitored.unavailable | count }} unavailable,
+        {{ monitored.low | count }} battery low.
+        Low Battery Devices: {{ monitored.low | join(', ') if monitored.low else 'None' }}
+        Unavailable Devices: {{ monitored.unavailable | join(', ') if monitored.unavailable else 'None' }}
+    actions:
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Battery Alert"
+          short_announcement: "{{ alert_line }}"
+          long_announcement: >-
+            {{ alert_line }}
+
+            {{ alert_summary }}
+
+  - id: battery_notes_weekly_digest
+    alias: "Battery Notes - Weekly Digest"
+    description: >
+      Sends the Battery Notes health summary to Pushover every Thursday at 19:00.
+      Temporary Battery Notes devices are excluded.
+    mode: single
+    triggers:
+      - trigger: time
+        at: "19:00:00"
+    conditions:
+      - condition: time
+        weekday:
+          - thu
+    variables:
+      alert_summary: *battery_notes_summary
+    actions:
+      - action: script.view_road_announcement
+        data:
+          channels: "pushover_zorruno"
+          title: "Weekly Battery Digest"
+          short_announcement: "Weekly Battery Digest"
+          long_announcement: "{{ alert_summary }}"

packages/bedroom_3_controls.yaml

@@ -1,75 +1,85 @@
-##########################################################################################
-# Bedroom 3 Morning Climate
-##########################################################################################
+# PACKAGE: Bedroom 3 Climate Controls
 #
-# Turns on the Bedroom 3 heat pump at the selected morning time without
-# changing its current HVAC mode, temperature, or other settings, then turns
-# it off at 08:30.
+# Purpose: Configurable automatic heat-pump schedule for Mollie's bedroom.
+# Notes: The schedule runs only on enabled weekday and/or weekend day types.
+# Version: 2.0.0
 #
-##########################################################################################
+#:########################################################################################:#
 
----
 input_boolean:
   bedroom_3_morning_climate_enabled:
-    name: Bedroom 3 Morning Climate
-    icon: mdi:weather-sunny
-    initial: true
+    name: "Bedroom 3 Heat Pump Auto Control"
+    icon: mdi:hvac
 
-input_select:
-  bedroom_3_morning_climate_time:
-    name: Bedroom 3 Morning Climate Time
+  bedroom_3_morning_climate_weekdays:
+    name: "Bedroom 3 Heat Pump Weekdays"
+    icon: mdi:calendar-week
+
+  bedroom_3_morning_climate_weekends:
+    name: "Bedroom 3 Heat Pump Weekends"
+    icon: mdi:calendar-weekend
+
+input_datetime:
+  bedroom_3_morning_climate_start_time:
+    name: "Bedroom 3 Heat Pump On Time"
     icon: mdi:clock-start
-    initial: "06:45"
-    options:
-      - "04:30"
-      - "04:45"
-      - "05:00"
-      - "05:15"
-      - "05:30"
-      - "05:45"
-      - "06:00"
-      - "06:15"
-      - "06:30"
-      - "06:45"
-      - "07:00"
-      - "07:15"
-      - "07:30"
-      - "07:45"
-      - "08:00"
-      - "08:15"
-      - "08:30"
-      - "08:45"
-      - "09:00"
-      - "09:15"
-      - "09:30"
-      - "09:45"
-      - "10:00"
+    has_date: false
+    has_time: true
+
+  bedroom_3_morning_climate_stop_time:
+    name: "Bedroom 3 Heat Pump Off Time"
+    icon: mdi:clock-end
+    has_date: false
+    has_time: true
+
+#:########################################################################################:#
+# Automations
+#:########################################################################################:#
 
 automation:
   - id: bedroom_3_morning_climate_start
-    alias: Bedroom 3 Morning Climate Start
-    description: >-
-      Turns on the Bedroom 3 heat pump at the selected time when enabled, then
-      turns it off at 08:30.
-    trigger:
+    alias: "Bedroom 3 Heat Pump Auto Start"
+    description: "Starts the heat pump at the selected time on enabled day types."
+    triggers:
       - trigger: time_pattern
-        minutes: "/15"
-    condition:
+        minutes: "/1"
+    conditions:
       - condition: state
         entity_id: input_boolean.bedroom_3_morning_climate_enabled
         state: "on"
       - condition: template
         value_template: >-
           {{ now().strftime('%H:%M') ==
-             states('input_select.bedroom_3_morning_climate_time') }}
-    action:
+             states('input_datetime.bedroom_3_morning_climate_start_time')[:5] }}
+      - condition: template
+        value_template: >-
+          {{ (now().weekday() < 5 and
+              is_state('input_boolean.bedroom_3_morning_climate_weekdays', 'on')) or
+             (now().weekday() >= 5 and
+              is_state('input_boolean.bedroom_3_morning_climate_weekends', 'on')) }}
+    actions:
       - action: climate.turn_on
         target:
           entity_id: climate.mollie_s_room
 
-      - wait_template: >-
-          {{ now().hour > 8 or (now().hour == 8 and now().minute >= 30) }}
-
+  - id: bedroom_3_morning_climate_stop
+    alias: "Bedroom 3 Heat Pump Auto Stop"
+    description: "Stops the heat pump at the selected time on enabled day types."
+    triggers:
+      - trigger: time_pattern
+        minutes: "/1"
+    conditions:
+      - condition: template
+        value_template: >-
+          {{ now().strftime('%H:%M') ==
+             states('input_datetime.bedroom_3_morning_climate_stop_time')[:5] }}
+      - condition: template
+        value_template: >-
+          {{ (now().weekday() < 5 and
+              is_state('input_boolean.bedroom_3_morning_climate_weekdays', 'on')) or
+             (now().weekday() >= 5 and
+              is_state('input_boolean.bedroom_3_morning_climate_weekends', 'on')) }}
+    actions:
       - action: climate.turn_off
         target:
           entity_id: climate.mollie_s_room

packages/byd_lock_button.yaml

@@ -0,0 +1,24 @@
+# Package: BYD Lock Button
+# Purpose:
+#   Provides a voice-assistant-safe BYD lock control that can only issue a lock command.
+# Notes:
+#   The icon reflects the live state of the underlying BYD lock. This button has no
+#   unlock action.
+# Version history:
+#   - 1.0.0: Initial lock-only BYD button.
+#
+#:########################################################################################:#
+# Template Button
+#:########################################################################################:#
+template:
+  - button:
+      - name: "BYD Lock"
+        unique_id: byd_lock_button
+        default_entity_id: button.byd_lock
+        availability: "{{ has_value('lock.atto_3_lock') }}"
+        icon: >-
+          {{ 'mdi:lock' if is_state('lock.atto_3_lock', 'locked') else 'mdi:lock-open' }}
+        press:
+          - action: lock.lock
+            target:
+              entity_id: lock.atto_3_lock

packages/energy_cost_monitoring.yaml

@@ -0,0 +1,941 @@
+################################################################################
+# PACKAGE: Energy Cost Monitoring
+################################################################################
+#
+# Version: 1.3.1
+# Date: 2026-09-01
+#
+# Purpose:
+#   Track GST-inclusive electricity costs for the three-phase grid supply and
+#   every appliance configured on the Energy dashboard.
+#
+# Notes:
+#   - Charged period: 00:00 to 21:00.
+#   - Free period: 21:00 to 00:00.
+#   - Bill rates are GST-exclusive; calculated costs include 15% GST.
+#   - Fixed daily charges are kept separate from appliance costs.
+#   - Integral sensors use the left method so tariff changes are applied at the
+#     boundary without averaging the old and new rates.
+#
+# Version history:
+#   1.3.1 (2026-09-01): Move Downstairs Fridge and Freezer shared power-cost
+#     telemetry from X41PP to X68PM.
+#   1.3.0 (2026-08-24): Add Drinks Fridge and Vertical Freezer energy and
+#     cost monitoring.
+#   1.2.0 (2026-08-23): Add Downstairs Lounge North GPO (X48PM) energy and
+#     cost monitoring.
+#   1.1.1 (2026-08-22): Use the Zigbee X31PP plug for Main Fridge power costs.
+#   1.1.0 (2026-08-17): Add sorted daily, weekly, and monthly appliance ranking
+#     meters and dynamic chart scales.
+#   1.0.0 (2026-08-17): Initial tariff, grid, appliance, and fixed-cost tracking.
+#
+#:########################################################################################:#
+# TARIFF HELPERS
+#:########################################################################################:#
+
+input_number:
+  electricity_paid_rate_ex_gst:
+    name: Electricity Paid Rate Ex GST
+    icon: mdi:cash
+    initial: 0.289
+    min: 0
+    max: 2
+    step: 0.001
+    mode: box
+    unit_of_measurement: "NZD/kWh"
+
+  electricity_daily_charge_ex_gst:
+    name: Electricity Daily Charge Ex GST
+    icon: mdi:calendar-cash
+    initial: 3.036
+    min: 0
+    max: 20
+    step: 0.001
+    mode: box
+    unit_of_measurement: "NZD/day"
+
+#:########################################################################################:#
+# TARIFF AND COST-RATE SENSORS
+#:########################################################################################:#
+
+template:
+  - sensor:
+      - name: Electricity Paid Rate
+        default_entity_id: sensor.electricity_paid_rate
+        unique_id: electricity_paid_rate
+        icon: mdi:cash
+        unit_of_measurement: "NZD/kWh"
+        state_class: measurement
+        state: >-
+          {{
+            (
+              states('input_number.electricity_paid_rate_ex_gst')
+              | float(0.289)
+              * 1.15
+            ) | round(5)
+          }}
+        attributes:
+          gst_rate: 0.15
+          rate_ex_gst: >-
+            {{
+              states('input_number.electricity_paid_rate_ex_gst')
+              | float(0.289)
+            }}
+
+      - name: Electricity Current Price
+        default_entity_id: sensor.electricity_current_price
+        unique_id: electricity_current_price
+        icon: mdi:currency-usd
+        unit_of_measurement: "NZD/kWh"
+        state_class: measurement
+        state: >-
+          {% set minute = now().hour * 60 + now().minute %}
+          {{
+            0
+            if minute >= 21 * 60
+            else states('sensor.electricity_paid_rate') | float(0.33235)
+          }}
+        attributes:
+          tariff: >-
+            {{ "free" if now().hour >= 21 else "charged" }}
+          charged_period: "00:00-21:00"
+          free_period: "21:00-00:00"
+          gst_included: true
+
+      - name: Electricity Daily Charge
+        default_entity_id: sensor.electricity_daily_charge
+        unique_id: electricity_daily_charge
+        icon: mdi:calendar-cash
+        unit_of_measurement: "NZD/day"
+        state_class: measurement
+        state: >-
+          {{
+            (
+              states('input_number.electricity_daily_charge_ex_gst')
+              | float(3.036)
+              * 1.15
+            ) | round(5)
+          }}
+        attributes:
+          gst_rate: 0.15
+          charge_ex_gst: >-
+            {{
+              states('input_number.electricity_daily_charge_ex_gst')
+              | float(3.036)
+            }}
+
+      - name: Electricity Grid Cost Rate
+        default_entity_id: sensor.electricity_grid_cost_rate
+        unique_id: electricity_grid_cost_rate
+        icon: mdi:transmission-tower
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: >-
+          {{
+            has_value('sensor.main_house_3_phase_power_monitor_main_power_red_active_power')
+            and has_value('sensor.main_house_3_phase_power_monitor_main_power_yellow_active_power')
+            and has_value('sensor.main_house_3_phase_power_monitor_main_power_blue_active_power')
+          }}
+        state: >-
+          {% set red = states('sensor.main_house_3_phase_power_monitor_main_power_red_active_power') | float(0) %}
+          {% set yellow = states('sensor.main_house_3_phase_power_monitor_main_power_yellow_active_power') | float(0) %}
+          {% set blue = states('sensor.main_house_3_phase_power_monitor_main_power_blue_active_power') | float(0) %}
+          {% set price = states('sensor.electricity_current_price') | float(0) %}
+          {{ ([red + yellow + blue, 0] | max / 1000 * price) | round(6) }}
+
+      - name: Energy Cost 16A EV Wallcharger Rate
+        default_entity_id: sensor.energy_cost_16a_ev_wallcharger_rate
+        unique_id: energy_cost_16a_ev_wallcharger_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.garage_db_control_16a_wallcharger_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.garage_db_control_16a_wallcharger_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost 32A EV Charger Rate
+        default_entity_id: sensor.energy_cost_32a_ev_charger_rate
+        unique_id: energy_cost_32a_ev_charger_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.main_house_3_phase_power_monitor_32a_wallcharger_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.main_house_3_phase_power_monitor_32a_wallcharger_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Underhouse Dehumidifier Rate
+        default_entity_id: sensor.energy_cost_underhouse_dehumidifier_rate
+        unique_id: energy_cost_underhouse_dehumidifier_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.underhouse_dehumidifier_power_plug_x10pp_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.underhouse_dehumidifier_power_plug_x10pp_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Pool Pump Rate
+        default_entity_id: sensor.energy_cost_pool_pump_rate
+        unique_id: energy_cost_pool_pump_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_poolpumppower_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_poolpumppower_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Data Cupboard Left Rate
+        default_entity_id: sensor.energy_cost_data_cupboard_left_rate
+        unique_id: energy_cost_data_cupboard_left_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_datacupboardpowermon_left_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_datacupboardpowermon_left_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Data Cupboard Right Rate
+        default_entity_id: sensor.energy_cost_data_cupboard_right_rate
+        unique_id: energy_cost_data_cupboard_right_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_datacupboardpowermon_right_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_datacupboardpowermon_right_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Laundry Dryer Rate
+        default_entity_id: sensor.energy_cost_laundry_dryer_rate
+        unique_id: energy_cost_laundry_dryer_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_laundrydrypow_load_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_laundrydrypow_load_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Laundry Washing Machine Rate
+        default_entity_id: sensor.energy_cost_laundry_washing_machine_rate
+        unique_id: energy_cost_laundry_washing_machine_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_laundrywashpow_load_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_laundrywashpow_load_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Main Dishwasher Rate
+        default_entity_id: sensor.energy_cost_main_dishwasher_rate
+        unique_id: energy_cost_main_dishwasher_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_maindishwasherpower_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_maindishwasherpower_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost 3D Printer Rate
+        default_entity_id: sensor.energy_cost_3d_printer_rate
+        unique_id: energy_cost_3d_printer_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_3dprinterpow_load_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_3dprinterpow_load_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Downstairs Dishwasher Rate
+        default_entity_id: sensor.energy_cost_downstairs_dishwasher_rate
+        unique_id: energy_cost_downstairs_dishwasher_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.esp_downstdishwasher_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.esp_downstdishwasher_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Main Fridge Rate
+        default_entity_id: sensor.energy_cost_main_fridge_rate
+        unique_id: energy_cost_main_fridge_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.upstairs_fridge_power_x31pp_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.upstairs_fridge_power_x31pp_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Downstairs Fridge Rate
+        default_entity_id: sensor.energy_cost_downstairs_fridge_rate
+        unique_id: energy_cost_downstairs_fridge_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.downstairs_fridge_gpo_power_x68pm_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Drinks Fridge Rate
+        default_entity_id: sensor.energy_cost_drinks_fridge_rate
+        unique_id: energy_cost_drinks_fridge_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.drinks_fridge_power_x59pm_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.drinks_fridge_power_x59pm_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Vertical Freezer Rate
+        default_entity_id: sensor.energy_cost_vertical_freezer_rate
+        unique_id: energy_cost_vertical_freezer_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.vertical_freezer_power_x60pm_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.vertical_freezer_power_x60pm_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Arcade Cabinet 1 Rate
+        default_entity_id: sensor.energy_cost_arcade_cabinet_1_rate
+        unique_id: energy_cost_arcade_cabinet_1_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.downstairs_flat_arcade_cabinet_1_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.downstairs_flat_arcade_cabinet_1_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Energy Cost Downstairs Lounge North GPO Rate
+        default_entity_id: sensor.energy_cost_downstairs_lounge_north_gpo_rate
+        unique_id: energy_cost_downstairs_lounge_north_gpo_rate
+        unit_of_measurement: "NZD/h"
+        state_class: measurement
+        availability: "{{ has_value('sensor.downstairs_lounge_north_gpo_x48pm_power') }}"
+        state: >-
+          {{
+            (
+              states('sensor.downstairs_lounge_north_gpo_x48pm_power') | float(0)
+              / 1000
+              * states('sensor.electricity_current_price') | float(0)
+            ) | round(6)
+          }}
+
+      - name: Electricity Total Cost
+        default_entity_id: sensor.electricity_total_cost
+        unique_id: electricity_total_cost
+        icon: mdi:cash-multiple
+        device_class: monetary
+        unit_of_measurement: "NZD"
+        state_class: total_increasing
+        availability: >-
+          {{
+            has_value('sensor.electricity_grid_usage_cost')
+            and has_value('sensor.electricity_fixed_charges_total')
+          }}
+        state: >-
+          {{
+            (
+              states('sensor.electricity_grid_usage_cost') | float(0)
+              + states('sensor.electricity_fixed_charges_total') | float(0)
+            ) | round(5)
+          }}
+        attributes:
+          usage_cost: "{{ states('sensor.electricity_grid_usage_cost') | float(0) }}"
+          fixed_cost: "{{ states('sensor.electricity_fixed_charges_total') | float(0) }}"
+          gst_included: true
+
+      - name: Energy Cost Daily Ranking Max
+        default_entity_id: sensor.energy_cost_daily_ranking_max
+        unique_id: energy_cost_daily_ranking_max
+        unit_of_measurement: "NZD"
+        state_class: measurement
+        state: >-
+          {% set values = [
+            states('sensor.16a_ev_wallcharger') | float(0),
+            states('sensor.32a_ev_charger') | float(0),
+            states('sensor.underhouse_dehumidifier') | float(0),
+            states('sensor.pool_pump') | float(0),
+            states('sensor.data_cupboard_left') | float(0),
+            states('sensor.data_cupboard_right') | float(0),
+            states('sensor.laundry_dryer') | float(0),
+            states('sensor.washing_machine') | float(0),
+            states('sensor.main_dishwasher') | float(0),
+            states('sensor.3d_printer') | float(0),
+            states('sensor.downstairs_dishwasher') | float(0),
+            states('sensor.main_fridge') | float(0),
+            states('sensor.downstairs_fridge') | float(0),
+            states('sensor.drinks_fridge') | float(0),
+            states('sensor.vertical_freezer') | float(0),
+            states('sensor.arcade_cabinet_1') | float(0),
+            states('sensor.downstairs_lounge_north_gpo_x48pm') | float(0)
+          ] %}
+          {{ ([values | max * 1.1, 0.01] | max) | round(5) }}
+
+      - name: Energy Cost Weekly Ranking Max
+        default_entity_id: sensor.energy_cost_weekly_ranking_max
+        unique_id: energy_cost_weekly_ranking_max
+        unit_of_measurement: "NZD"
+        state_class: measurement
+        state: >-
+          {% set values = [
+            states('sensor.16a_ev_wallcharger_2') | float(0),
+            states('sensor.32a_ev_charger_2') | float(0),
+            states('sensor.underhouse_dehumidifier_2') | float(0),
+            states('sensor.pool_pump_2') | float(0),
+            states('sensor.data_cupboard_left_2') | float(0),
+            states('sensor.data_cupboard_right_2') | float(0),
+            states('sensor.laundry_dryer_2') | float(0),
+            states('sensor.washing_machine_2') | float(0),
+            states('sensor.main_dishwasher_2') | float(0),
+            states('sensor.3d_printer_2') | float(0),
+            states('sensor.downstairs_dishwasher_2') | float(0),
+            states('sensor.main_fridge_2') | float(0),
+            states('sensor.downstairs_fridge_2') | float(0),
+            states('sensor.drinks_fridge_2') | float(0),
+            states('sensor.vertical_freezer_2') | float(0),
+            states('sensor.arcade_cabinet_1_2') | float(0),
+            states('sensor.downstairs_lounge_north_gpo_x48pm_2') | float(0)
+          ] %}
+          {{ ([values | max * 1.1, 0.01] | max) | round(5) }}
+
+      - name: Energy Cost Monthly Ranking Max
+        default_entity_id: sensor.energy_cost_monthly_ranking_max
+        unique_id: energy_cost_monthly_ranking_max
+        unit_of_measurement: "NZD"
+        state_class: measurement
+        state: >-
+          {% set values = [
+            states('sensor.16a_ev_wallcharger_3') | float(0),
+            states('sensor.32a_ev_charger_3') | float(0),
+            states('sensor.underhouse_dehumidifier_3') | float(0),
+            states('sensor.pool_pump_3') | float(0),
+            states('sensor.data_cupboard_left_3') | float(0),
+            states('sensor.data_cupboard_right_3') | float(0),
+            states('sensor.laundry_dryer_3') | float(0),
+            states('sensor.washing_machine_3') | float(0),
+            states('sensor.main_dishwasher_3') | float(0),
+            states('sensor.3d_printer_3') | float(0),
+            states('sensor.downstairs_dishwasher_3') | float(0),
+            states('sensor.main_fridge_3') | float(0),
+            states('sensor.downstairs_fridge_3') | float(0),
+            states('sensor.drinks_fridge_3') | float(0),
+            states('sensor.vertical_freezer_3') | float(0),
+            states('sensor.arcade_cabinet_1_3') | float(0),
+            states('sensor.downstairs_lounge_north_gpo_x48pm_3') | float(0)
+          ] %}
+          {{ ([values | max * 1.1, 0.01] | max) | round(5) }}
+
+  - triggers:
+      - trigger: homeassistant
+        event: start
+      - trigger: time
+        at: "00:00:00"
+      - trigger: event
+        event_type: event_template_reloaded
+    sensor:
+      - name: Electricity Fixed Charges Total
+        default_entity_id: sensor.electricity_fixed_charges_total
+        unique_id: electricity_fixed_charges_total
+        icon: mdi:calendar-cash
+        device_class: monetary
+        unit_of_measurement: "NZD"
+        state_class: total_increasing
+        state: >-
+          {% set rate = states('sensor.electricity_daily_charge') | float(3.4914) %}
+          {% set last = this.attributes.get('last_charge_date') %}
+          {% if last %}
+            {% set days = (now().date() - strptime(last, '%Y-%m-%d').date()).days %}
+            {{
+              (
+                this.state | float(0)
+                + ([days, 0] | max) * rate
+              ) | round(5)
+            }}
+          {% else %}
+            {{ rate | round(5) }}
+          {% endif %}
+        attributes:
+          last_charge_date: "{{ now().date() }}"
+          daily_charge: "{{ states('sensor.electricity_daily_charge') | float(3.4914) }}"
+          gst_included: true
+
+#:########################################################################################:#
+# CUMULATIVE USAGE COSTS
+#:########################################################################################:#
+
+sensor:
+  - platform: integration
+    source: sensor.electricity_grid_cost_rate
+    name: Electricity Grid Usage Cost
+    unique_id: electricity_grid_usage_cost
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_16a_ev_wallcharger_rate
+    name: Energy Cost 16A EV Wallcharger
+    unique_id: energy_cost_16a_ev_wallcharger
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_32a_ev_charger_rate
+    name: Energy Cost 32A EV Charger
+    unique_id: energy_cost_32a_ev_charger
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_underhouse_dehumidifier_rate
+    name: Energy Cost Underhouse Dehumidifier
+    unique_id: energy_cost_underhouse_dehumidifier
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_pool_pump_rate
+    name: Energy Cost Pool Pump
+    unique_id: energy_cost_pool_pump
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_data_cupboard_left_rate
+    name: Energy Cost Data Cupboard Left
+    unique_id: energy_cost_data_cupboard_left
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_data_cupboard_right_rate
+    name: Energy Cost Data Cupboard Right
+    unique_id: energy_cost_data_cupboard_right
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_laundry_dryer_rate
+    name: Energy Cost Laundry Dryer
+    unique_id: energy_cost_laundry_dryer
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_laundry_washing_machine_rate
+    name: Energy Cost Laundry Washing Machine
+    unique_id: energy_cost_laundry_washing_machine
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_main_dishwasher_rate
+    name: Energy Cost Main Dishwasher
+    unique_id: energy_cost_main_dishwasher
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_3d_printer_rate
+    name: Energy Cost 3D Printer
+    unique_id: energy_cost_3d_printer
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_downstairs_dishwasher_rate
+    name: Energy Cost Downstairs Dishwasher
+    unique_id: energy_cost_downstairs_dishwasher
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_main_fridge_rate
+    name: Energy Cost Main Fridge
+    unique_id: energy_cost_main_fridge
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_downstairs_fridge_rate
+    name: Energy Cost Downstairs Fridge
+    unique_id: energy_cost_downstairs_fridge
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_drinks_fridge_rate
+    name: Energy Cost Drinks Fridge
+    unique_id: energy_cost_drinks_fridge
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_vertical_freezer_rate
+    name: Energy Cost Vertical Freezer
+    unique_id: energy_cost_vertical_freezer
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_arcade_cabinet_1_rate
+    name: Energy Cost Arcade Cabinet 1
+    unique_id: energy_cost_arcade_cabinet_1
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+  - platform: integration
+    source: sensor.energy_cost_downstairs_lounge_north_gpo_rate
+    name: Energy Cost Downstairs Lounge North GPO
+    unique_id: energy_cost_downstairs_lounge_north_gpo
+    unit_time: h
+    method: left
+    round: 5
+    max_sub_interval:
+      minutes: 5
+
+#:########################################################################################:#
+# APPLIANCE COST RANKING METERS
+#:########################################################################################:#
+
+utility_meter:
+  energy_cost_daily_16a_ev_wallcharger: &energy_cost_daily_meter
+    source: sensor.energy_cost_16a_ev_wallcharger
+    name: 16A EV Wallcharger
+    cycle: daily
+    periodically_resetting: false
+    always_available: true
+  energy_cost_daily_32a_ev_charger:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_32a_ev_charger
+    name: 32A EV Charger
+  energy_cost_daily_underhouse_dehumidifier:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_underhouse_dehumidifier
+    name: Underhouse Dehumidifier
+  energy_cost_daily_pool_pump:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_pool_pump
+    name: Pool Pump
+  energy_cost_daily_data_cupboard_left:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_data_cupboard_left
+    name: Data Cupboard Left
+  energy_cost_daily_data_cupboard_right:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_data_cupboard_right
+    name: Data Cupboard Right
+  energy_cost_daily_laundry_dryer:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_laundry_dryer
+    name: Laundry Dryer
+  energy_cost_daily_laundry_washing_machine:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_laundry_washing_machine
+    name: Washing Machine
+  energy_cost_daily_main_dishwasher:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_main_dishwasher
+    name: Main Dishwasher
+  energy_cost_daily_3d_printer:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_3d_printer
+    name: 3D Printer
+  energy_cost_daily_downstairs_dishwasher:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_downstairs_dishwasher
+    name: Downstairs Dishwasher
+  energy_cost_daily_main_fridge:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_main_fridge
+    name: Main Fridge
+  energy_cost_daily_downstairs_fridge:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_downstairs_fridge
+    name: Downstairs Fridge
+  energy_cost_daily_drinks_fridge:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_drinks_fridge
+    name: Drinks Fridge
+  energy_cost_daily_vertical_freezer:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_vertical_freezer
+    name: Vertical Freezer
+  energy_cost_daily_arcade_cabinet_1:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_arcade_cabinet_1
+    name: Arcade Cabinet 1
+  energy_cost_daily_downstairs_lounge_north_gpo:
+    <<: *energy_cost_daily_meter
+    source: sensor.energy_cost_downstairs_lounge_north_gpo
+    name: Downstairs Lounge North GPO (X48PM)
+
+  energy_cost_weekly_16a_ev_wallcharger: &energy_cost_weekly_meter
+    source: sensor.energy_cost_16a_ev_wallcharger
+    name: 16A EV Wallcharger
+    cycle: weekly
+    periodically_resetting: false
+    always_available: true
+  energy_cost_weekly_32a_ev_charger:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_32a_ev_charger
+    name: 32A EV Charger
+  energy_cost_weekly_underhouse_dehumidifier:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_underhouse_dehumidifier
+    name: Underhouse Dehumidifier
+  energy_cost_weekly_pool_pump:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_pool_pump
+    name: Pool Pump
+  energy_cost_weekly_data_cupboard_left:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_data_cupboard_left
+    name: Data Cupboard Left
+  energy_cost_weekly_data_cupboard_right:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_data_cupboard_right
+    name: Data Cupboard Right
+  energy_cost_weekly_laundry_dryer:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_laundry_dryer
+    name: Laundry Dryer
+  energy_cost_weekly_laundry_washing_machine:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_laundry_washing_machine
+    name: Washing Machine
+  energy_cost_weekly_main_dishwasher:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_main_dishwasher
+    name: Main Dishwasher
+  energy_cost_weekly_3d_printer:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_3d_printer
+    name: 3D Printer
+  energy_cost_weekly_downstairs_dishwasher:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_downstairs_dishwasher
+    name: Downstairs Dishwasher
+  energy_cost_weekly_main_fridge:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_main_fridge
+    name: Main Fridge
+  energy_cost_weekly_downstairs_fridge:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_downstairs_fridge
+    name: Downstairs Fridge
+  energy_cost_weekly_drinks_fridge:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_drinks_fridge
+    name: Drinks Fridge
+  energy_cost_weekly_vertical_freezer:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_vertical_freezer
+    name: Vertical Freezer
+  energy_cost_weekly_arcade_cabinet_1:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_arcade_cabinet_1
+    name: Arcade Cabinet 1
+  energy_cost_weekly_downstairs_lounge_north_gpo:
+    <<: *energy_cost_weekly_meter
+    source: sensor.energy_cost_downstairs_lounge_north_gpo
+    name: Downstairs Lounge North GPO (X48PM)
+
+  energy_cost_monthly_16a_ev_wallcharger: &energy_cost_monthly_meter
+    source: sensor.energy_cost_16a_ev_wallcharger
+    name: 16A EV Wallcharger
+    cycle: monthly
+    periodically_resetting: false
+    always_available: true
+  energy_cost_monthly_32a_ev_charger:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_32a_ev_charger
+    name: 32A EV Charger
+  energy_cost_monthly_underhouse_dehumidifier:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_underhouse_dehumidifier
+    name: Underhouse Dehumidifier
+  energy_cost_monthly_pool_pump:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_pool_pump
+    name: Pool Pump
+  energy_cost_monthly_data_cupboard_left:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_data_cupboard_left
+    name: Data Cupboard Left
+  energy_cost_monthly_data_cupboard_right:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_data_cupboard_right
+    name: Data Cupboard Right
+  energy_cost_monthly_laundry_dryer:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_laundry_dryer
+    name: Laundry Dryer
+  energy_cost_monthly_laundry_washing_machine:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_laundry_washing_machine
+    name: Washing Machine
+  energy_cost_monthly_main_dishwasher:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_main_dishwasher
+    name: Main Dishwasher
+  energy_cost_monthly_3d_printer:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_3d_printer
+    name: 3D Printer
+  energy_cost_monthly_downstairs_dishwasher:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_downstairs_dishwasher
+    name: Downstairs Dishwasher
+  energy_cost_monthly_main_fridge:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_main_fridge
+    name: Main Fridge
+  energy_cost_monthly_downstairs_fridge:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_downstairs_fridge
+    name: Downstairs Fridge
+  energy_cost_monthly_drinks_fridge:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_drinks_fridge
+    name: Drinks Fridge
+  energy_cost_monthly_vertical_freezer:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_vertical_freezer
+    name: Vertical Freezer
+  energy_cost_monthly_arcade_cabinet_1:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_arcade_cabinet_1
+    name: Arcade Cabinet 1
+  energy_cost_monthly_downstairs_lounge_north_gpo:
+    <<: *energy_cost_monthly_meter
+    source: sensor.energy_cost_downstairs_lounge_north_gpo
+    name: Downstairs Lounge North GPO (X48PM)

packages/free_power_time_actions.yaml

@@ -2,6 +2,11 @@
 # PACKAGE: Free Power Time Automation                                                     #
 #:########################################################################################:#
 # VERSION:
+#   1.2.1 - 2026-08-17
+#     - Allow the configured end-time trigger to run without waiting for the
+#       Free Power Time Active template sensor to update at the same instant.
+#       The inactive-window check now applies only to startup catch-up.
+#
 #   1.2.0 - 2026-07-24
 #     - Added startup catch-up to end_actions: when HA starts outside the
 #       free power window, the end actions (chargers off, dehumidifier off)
@@ -321,11 +326,15 @@ automation:
     triggers:
       - trigger: time
         at: input_datetime.free_power_end_time
+        id: scheduled_end
       - trigger: homeassistant
         event: start
+        id: startup
     conditions:
-      - condition: state
-        entity_id: binary_sensor.free_power_time_active
-        state: "off"
+      # The scheduled end must not race the template sensor's minute update.
+      # Startup catch-up still runs only outside the free power window.
+      - condition: template
+        value_template: >-
+          {{ trigger.id == 'scheduled_end' or is_state('binary_sensor.free_power_time_active', 'off') }}
     actions:
       - action: script.free_power_end_actions

packages/fridge_freezer_monitoring.yaml

@@ -0,0 +1,980 @@
+#:########################################################################################:#
+# PACKAGE: Fridge and Freezer Monitoring
+# FILE: packages/fridge_freezer_monitoring.yaml
+# VERSION: v1.13.0 2026-09-03
+#   - Moves Downstairs Freezer temperature, humidity, and battery monitoring
+#     from X62TS to X70TS.
+#   - Moves shared Downstairs Fridge and Freezer power monitoring from X41PP to
+#     the metering-only X68PM GPO.
+#   - Reports an unavailable Main Kitchen Fridge battery monitor explicitly,
+#     rather than showing an unqualified issue.
+#   - Moves Main Kitchen Fridge temperature, humidity, and battery monitoring to
+#     X65TS and adds X64LS illuminance-based door monitoring.
+#   - v1.10.0 2026-08-29: Adds Downstairs Freezer temperature, battery, door, humidity, and shared
+#     Downstairs Fridge/Freezer plug monitoring.
+#   - Uses a four-hour sustained low-draw power-loss rule for all monitored
+#     fridges and freezers, including the shared Drinks Fridge/Freezer plug.
+#   - v1.8.4 2026-08-24: Flags a Drinks Fridge power loss only after six
+#     continuous hours below 1 W.
+#   - v1.8.3 2026-08-24: Excludes normal Drinks Fridge compressor-off cycles
+#     from power alerts.
+#   - v1.8.2 2026-08-24: Widens Drinks Fridge and Vertical Freezer adaptive
+#     temperature ceilings to accommodate confirmed normal compressor cycles.
+#   - v1.8.1 2026-08-24: Excludes normal Vertical Freezer compressor-off cycles
+#     from power alerts and widens its learned temperature allowance.
+#   - v1.8.0 2026-08-24: Adds Drinks Fridge and Vertical Freezer plug monitoring.
+#   - Adds illuminance-based door monitoring for the Downstairs Fridge.
+#   - Adds Drinks Fridge door detection from its illuminance sensor.
+#   - Makes an open door an issue after seven minutes and delays temperature
+#     alerts while the door is open or cooling recovers after closure.
+#   - v1.5.0 2026-08-22
+#   - Requires five minutes of sub-1 W draw before reporting Main Kitchen Fridge power loss.
+#   - Moved Main Kitchen Fridge power monitoring to the Zigbee X31PP plug.
+#   - v1.3.0 2026-08-17: Uses the calibrated Main Kitchen Fridge temperature entity throughout.
+#   - Uses the calibrated Main Kitchen Fridge temperature entity throughout.
+#   - Added adaptive temperature, battery, humidity, and power monitoring for
+#     the Downstairs Fridge.
+#   - v1.1.0 2026-08-16: Reduced the adaptive temperature margin and issue persistence time.
+#:########################################################################################:#
+# PURPOSE:
+#   Detect missing monitoring, low batteries, loss of Main Fridge power, and
+#   abnormal warming, including door-aware handling where a sensor is fitted.
+#:########################################################################################:#
+# BEHAVIOUR:
+#   - Learns a continuously rolling seven-day average and 95th percentile.
+#   - Limits each learned threshold with an appliance-specific safety maximum.
+#   - Measures the temperature change rate over a smoothed 30-minute window.
+#   - Requires an issue condition to persist for one minute, except Main Kitchen
+#     Fridge low-power draw, which persists for five minutes.
+#   - Treats the Main Kitchen, Drinks, and Downstairs Fridges as open at 10 lx or higher. An
+#     open door is an issue after seven minutes, while temperature alerting
+#     stays deferred through a 15-minute post-close recovery window.
+#   - Exposes one issue binary sensor per appliance and one summary sensor.
+#:########################################################################################:#
+# NOTES:
+#   - Learned thresholds use the lower of 95th percentile + 0.5 C or the fixed
+#     safety limit, so a cooling failure cannot gradually become normal.
+#   - A rise rate of at least 2 C/hour labels an over-temperature condition as
+#     possible open-door warming; slower warming is labelled loss of cooling.
+#   - Main Fridge power below 1 W is treated as loss only after five minutes to
+#     avoid normal compressor-off periods; unplugged or unavailable monitoring
+#     remains an issue after one minute.
+#   - Main Fridge X65TS temperature is adjusted by -0.84 C to match the
+#     reference thermometer.
+#   - Wine-fridge ESPHome telemetry is intentionally excluded.
+#:########################################################################################:#
+# DEPENDENCIES:
+#   - Seven configured fridge/freezer temperature and battery monitor pairs.
+#   - switch.upstairs_fridge_power_x31pp
+#   - sensor.upstairs_fridge_power_x31pp_power
+#   - sensor.downstairs_fridge_gpo_power_x68pm_power
+#   - switch.drinks_fridge_power_x59pm
+#   - sensor.drinks_fridge_power_x59pm_power
+#   - switch.vertical_freezer_power_x60pm
+#   - sensor.vertical_freezer_power_x60pm_power
+#   - sensor.drinks_fridge_light_sensor_x35ls_illuminance
+#   - sensor.downstairs_fridge_light_sensor_x58ls_illuminance
+#   - sensor.downstairs_freezer_light_sensor_x61ls_illuminance
+#   - sensor.main_kitchen_fridge_light_sensor_x64ls_illuminance
+#:########################################################################################:#
+
+sensor:
+  #:######################################################################################:#
+  # MAIN KITCHEN FRIDGE
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Main Kitchen Fridge Temperature Average 7 Days"
+    unique_id: main_kitchen_fridge_temperature_average_7_days
+    entity_id: sensor.main_kitchen_fridge_temperature_calibrated
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Main Kitchen Fridge Temperature 95th Percentile 7 Days"
+    unique_id: main_kitchen_fridge_temperature_95th_percentile_7_days
+    entity_id: sensor.main_kitchen_fridge_temperature_calibrated
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Main Kitchen Fridge Temperature Change Rate"
+    unique_id: main_kitchen_fridge_temperature_change_rate
+    source: sensor.main_kitchen_fridge_temperature_calibrated
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+  #:######################################################################################:#
+  # DRINKS FRIDGE
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Drinks Fridge Temperature Average 7 Days"
+    unique_id: drinks_fridge_temperature_average_7_days
+    entity_id: sensor.drinks_fridge_environment_lcd_btt01_temperature
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Drinks Fridge Temperature 95th Percentile 7 Days"
+    unique_id: drinks_fridge_temperature_95th_percentile_7_days
+    entity_id: sensor.drinks_fridge_environment_lcd_btt01_temperature
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Drinks Fridge Temperature Change Rate"
+    unique_id: drinks_fridge_temperature_change_rate
+    source: sensor.drinks_fridge_environment_lcd_btt01_temperature
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+  #:######################################################################################:#
+  # DOWNSTAIRS FRIDGE
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Downstairs Fridge Temperature Average 7 Days"
+    unique_id: downstairs_fridge_temperature_average_7_days
+    entity_id: sensor.downstairs_fridge_temperature_x43ts_temperature
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Downstairs Fridge Temperature 95th Percentile 7 Days"
+    unique_id: downstairs_fridge_temperature_95th_percentile_7_days
+    entity_id: sensor.downstairs_fridge_temperature_x43ts_temperature
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Downstairs Fridge Temperature Change Rate"
+    unique_id: downstairs_fridge_temperature_change_rate
+    source: sensor.downstairs_fridge_temperature_x43ts_temperature
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+  #:######################################################################################:#
+  # DOWNSTAIRS FREEZER
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Downstairs Freezer Temperature Average 7 Days"
+    unique_id: downstairs_freezer_temperature_average_7_days
+    entity_id: sensor.downstairs_freezer_temperature_x70ts_temperature
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Downstairs Freezer Temperature 95th Percentile 7 Days"
+    unique_id: downstairs_freezer_temperature_95th_percentile_7_days
+    entity_id: sensor.downstairs_freezer_temperature_x70ts_temperature
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Downstairs Freezer Temperature Change Rate"
+    unique_id: downstairs_freezer_temperature_change_rate
+    source: sensor.downstairs_freezer_temperature_x70ts_temperature
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+  #:######################################################################################:#
+  # WINE FRIDGE
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Wine Fridge Temperature Average 7 Days"
+    unique_id: wine_fridge_temperature_average_7_days
+    entity_id: sensor.lcd_temp_humidity_btt04_temperature
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Wine Fridge Temperature 95th Percentile 7 Days"
+    unique_id: wine_fridge_temperature_95th_percentile_7_days
+    entity_id: sensor.lcd_temp_humidity_btt04_temperature
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Wine Fridge Temperature Change Rate"
+    unique_id: wine_fridge_temperature_change_rate
+    source: sensor.lcd_temp_humidity_btt04_temperature
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+  #:######################################################################################:#
+  # DRINKS FREEZER
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Drinks Freezer Temperature Average 7 Days"
+    unique_id: drinks_freezer_temperature_average_7_days
+    entity_id: sensor.drinks_freezer_environment_lcd_btt02_temperature
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Drinks Freezer Temperature 95th Percentile 7 Days"
+    unique_id: drinks_freezer_temperature_95th_percentile_7_days
+    entity_id: sensor.drinks_freezer_environment_lcd_btt02_temperature
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Drinks Freezer Temperature Change Rate"
+    unique_id: drinks_freezer_temperature_change_rate
+    source: sensor.drinks_freezer_environment_lcd_btt02_temperature
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+  #:######################################################################################:#
+  # VERTICAL FREEZER
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Vertical Freezer Temperature Average 7 Days"
+    unique_id: vertical_freezer_temperature_average_7_days
+    entity_id: sensor.lcd_temp_humidity_btt03_temperature
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Vertical Freezer Temperature 95th Percentile 7 Days"
+    unique_id: vertical_freezer_temperature_95th_percentile_7_days
+    entity_id: sensor.lcd_temp_humidity_btt03_temperature
+    state_characteristic: percentile
+    percentile: 95
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: derivative
+    name: "Vertical Freezer Temperature Change Rate"
+    unique_id: vertical_freezer_temperature_change_rate
+    source: sensor.lcd_temp_humidity_btt03_temperature
+    unit_time: h
+    time_window: "00:30:00"
+    max_sub_interval: "00:05:00"
+    round: 1
+
+template:
+  #:######################################################################################:#
+  # DOOR DETECTION
+  #:######################################################################################:#
+  - binary_sensor:
+      - name: "Main Kitchen Fridge Door Open"
+        unique_id: main_kitchen_fridge_door_open
+        device_class: door
+        state: >-
+          {{
+            has_value('sensor.main_kitchen_fridge_light_sensor_x64ls_illuminance')
+            and (states('sensor.main_kitchen_fridge_light_sensor_x64ls_illuminance') | float(0)) >= 10
+          }}
+
+      # Retain the grace period after closure so the fridge can start cooling.
+      - name: "Main Kitchen Fridge Temperature Recovery Grace"
+        unique_id: main_kitchen_fridge_temperature_recovery_grace
+        delay_off: "00:15:00"
+        state: "{{ is_state('binary_sensor.main_kitchen_fridge_door_open', 'on') }}"
+
+      - name: "Main Kitchen Fridge Door Open Too Long"
+        unique_id: main_kitchen_fridge_door_open_too_long
+        device_class: problem
+        delay_on: "00:07:00"
+        state: "{{ is_state('binary_sensor.main_kitchen_fridge_door_open', 'on') }}"
+
+      - name: "Drinks Fridge Door Open"
+        unique_id: drinks_fridge_door_open
+        device_class: door
+        state: >-
+          {{
+            has_value('sensor.drinks_fridge_light_sensor_x35ls_illuminance')
+            and (states('sensor.drinks_fridge_light_sensor_x35ls_illuminance') | float(0)) >= 10
+          }}
+
+      # Retain the grace period after closure so the fridge can start cooling.
+      - name: "Drinks Fridge Temperature Recovery Grace"
+        unique_id: drinks_fridge_temperature_recovery_grace
+        delay_off: "00:15:00"
+        state: "{{ is_state('binary_sensor.drinks_fridge_door_open', 'on') }}"
+
+      - name: "Drinks Fridge Door Open Too Long"
+        unique_id: drinks_fridge_door_open_too_long
+        device_class: problem
+        delay_on: "00:07:00"
+        state: "{{ is_state('binary_sensor.drinks_fridge_door_open', 'on') }}"
+
+      - name: "Downstairs Fridge Door Open"
+        unique_id: downstairs_fridge_door_open
+        device_class: door
+        state: >-
+          {{
+            has_value('sensor.downstairs_fridge_light_sensor_x58ls_illuminance')
+            and (states('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') | float(0)) >= 10
+          }}
+
+      # Retain the grace period after closure so the fridge can start cooling.
+      - name: "Downstairs Fridge Temperature Recovery Grace"
+        unique_id: downstairs_fridge_temperature_recovery_grace
+        delay_off: "00:15:00"
+        state: "{{ is_state('binary_sensor.downstairs_fridge_door_open', 'on') }}"
+
+      - name: "Downstairs Fridge Door Open Too Long"
+        unique_id: downstairs_fridge_door_open_too_long
+        device_class: problem
+        delay_on: "00:07:00"
+        state: "{{ is_state('binary_sensor.downstairs_fridge_door_open', 'on') }}"
+
+      - name: "Downstairs Freezer Door Open"
+        unique_id: downstairs_freezer_door_open
+        device_class: door
+        state: >-
+          {{
+            has_value('sensor.downstairs_freezer_light_sensor_x61ls_illuminance')
+            and (states('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') | float(0)) >= 10
+          }}
+
+      # Retain the grace period after closure so the freezer can start cooling.
+      - name: "Downstairs Freezer Temperature Recovery Grace"
+        unique_id: downstairs_freezer_temperature_recovery_grace
+        delay_off: "00:15:00"
+        state: "{{ is_state('binary_sensor.downstairs_freezer_door_open', 'on') }}"
+
+      - name: "Downstairs Freezer Door Open Too Long"
+        unique_id: downstairs_freezer_door_open_too_long
+        device_class: problem
+        delay_on: "00:07:00"
+        state: "{{ is_state('binary_sensor.downstairs_freezer_door_open', 'on') }}"
+
+  #:######################################################################################:#
+  # APPLIANCE ISSUE SENSORS
+  #:######################################################################################:#
+  - binary_sensor:
+      - name: "Main Kitchen Fridge Power Draw Lost"
+        unique_id: main_kitchen_fridge_power_draw_lost
+        device_class: problem
+        delay_on: "04:00:00"
+        state: >-
+          {{
+            is_state('switch.upstairs_fridge_power_x31pp', 'on')
+            and has_value('sensor.upstairs_fridge_power_x31pp_power')
+            and (states('sensor.upstairs_fridge_power_x31pp_power') | float(0)) < 1
+          }}
+
+      # A compressor-off interval is normal; measure the uninterrupted idle time
+      # explicitly so a template reload cannot restore this as an active fault.
+      - name: "Drinks Fridge Power Draw Lost"
+        unique_id: drinks_fridge_power_draw_lost
+        device_class: problem
+        state: >-
+          {% set power = states('sensor.drinks_fridge_power_x59pm_power') | float(none) %}
+          {% set changed = states.sensor.drinks_fridge_power_x59pm_power.last_changed %}
+          {{
+            is_state('switch.drinks_fridge_power_x59pm', 'on')
+            and power is not none
+            and power < 1
+            and (now() - changed).total_seconds() >= 4 * 60 * 60
+          }}
+
+      - name: "Downstairs Fridge Power Draw Lost"
+        unique_id: downstairs_fridge_power_draw_lost
+        device_class: problem
+        state: >-
+          {% set power = states('sensor.downstairs_fridge_gpo_power_x68pm_power') | float(none) %}
+          {% set changed = states.sensor.downstairs_fridge_gpo_power_x68pm_power.last_changed %}
+          {{
+            power is not none
+            and power < 1
+            and (now() - changed).total_seconds() >= 4 * 60 * 60
+          }}
+
+      - name: "Vertical Freezer Power Draw Lost"
+        unique_id: vertical_freezer_power_draw_lost
+        device_class: problem
+        state: >-
+          {% set power = states('sensor.vertical_freezer_power_x60pm_power') | float(none) %}
+          {% set changed = states.sensor.vertical_freezer_power_x60pm_power.last_changed %}
+          {{
+            is_state('switch.vertical_freezer_power_x60pm', 'on')
+            and power is not none
+            and power < 1
+            and (now() - changed).total_seconds() >= 4 * 60 * 60
+          }}
+
+      - name: "Main Kitchen Fridge Issue"
+        unique_id: main_kitchen_fridge_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.main_kitchen_fridge_temperature_calibrated') %}
+          {% set battery_missing = not has_value('sensor.main_kitchen_fridge_temperature_x65ts_battery') %}
+          {% set illuminance_missing = not has_value('sensor.main_kitchen_fridge_light_sensor_x64ls_illuminance') %}
+          {% set power_missing = not has_value('sensor.upstairs_fridge_power_x31pp_power') %}
+          {% set percentile = states('sensor.main_kitchen_fridge_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [10, percentile + 0.5] | min if percentile is not none else 10 %}
+          {{
+            temperature_missing
+            or illuminance_missing
+            or battery_missing
+            or (
+              not battery_missing
+              and (states('sensor.main_kitchen_fridge_temperature_x65ts_battery') | float(0)) <= 20
+            )
+            or is_state('binary_sensor.main_kitchen_fridge_door_open_too_long', 'on')
+            or (
+              not temperature_missing
+              and not is_state('binary_sensor.main_kitchen_fridge_temperature_recovery_grace', 'on')
+              and (states('sensor.main_kitchen_fridge_temperature_calibrated') | float(0)) > threshold
+            )
+            or states('switch.upstairs_fridge_power_x31pp') != 'on'
+            or power_missing
+            or is_state('binary_sensor.main_kitchen_fridge_power_draw_lost', 'on')
+          }}
+        attributes:
+          appliance: "Main Kitchen Fridge"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.main_kitchen_fridge_temperature_calibrated') %}
+            {% set battery_missing = not has_value('sensor.main_kitchen_fridge_temperature_x65ts_battery') %}
+            {% set illuminance_missing = not has_value('sensor.main_kitchen_fridge_light_sensor_x64ls_illuminance') %}
+            {% set power_missing = not has_value('sensor.upstairs_fridge_power_x31pp_power') %}
+            {% set percentile = states('sensor.main_kitchen_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [10, percentile + 0.5] | min if percentile is not none else 10 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if illuminance_missing %}
+              {% set ns.items = ns.items + ['Door monitor unavailable'] %}
+            {% endif %}
+            {% if battery_missing %}
+              {% set ns.items = ns.items + ['Battery monitor unavailable'] %}
+            {% elif (states('sensor.main_kitchen_fridge_temperature_x65ts_battery') | float(0)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if states('switch.upstairs_fridge_power_x31pp') in ['unknown', 'unavailable'] or power_missing %}
+              {% set ns.items = ns.items + ['Power monitoring unavailable'] %}
+            {% elif not is_state('switch.upstairs_fridge_power_x31pp', 'on') %}
+              {% set ns.items = ns.items + ['Power switched off'] %}
+            {% elif is_state('binary_sensor.main_kitchen_fridge_power_draw_lost', 'on') %}
+              {% set ns.items = ns.items + ['Power lost - no power draw'] %}
+            {% endif %}
+            {% if is_state('binary_sensor.main_kitchen_fridge_door_open_too_long', 'on') %}
+              {% set ns.items = ns.items + ['Door open too long'] %}
+            {% elif not temperature_missing and is_state('binary_sensor.main_kitchen_fridge_temperature_recovery_grace', 'on') %}
+              {% set ns.items = ns.items + ['Temperature alert delayed - door recently open'] %}
+            {% elif not temperature_missing and (states('sensor.main_kitchen_fridge_temperature_calibrated') | float(0)) > threshold %}
+              {% if (states('sensor.main_kitchen_fridge_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.main_kitchen_fridge_temperature_calibrated') }}"
+          average_7_days: "{{ states('sensor.main_kitchen_fridge_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.main_kitchen_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [10, percentile + 0.5] | min if percentile is not none else 10 }}
+          change_rate: "{{ states('sensor.main_kitchen_fridge_temperature_change_rate') }}"
+          humidity: "{{ states('sensor.main_kitchen_fridge_temperature_x65ts_humidity') }}"
+          battery: "{{ states('sensor.main_kitchen_fridge_temperature_x65ts_battery') }}"
+          power: "{{ states('sensor.upstairs_fridge_power_x31pp_power') }}"
+          door_open: "{{ is_state('binary_sensor.main_kitchen_fridge_door_open', 'on') }}"
+          illuminance: "{{ states('sensor.main_kitchen_fridge_light_sensor_x64ls_illuminance') }}"
+
+      - name: "Drinks Fridge Issue"
+        unique_id: drinks_fridge_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.drinks_fridge_environment_lcd_btt01_temperature') %}
+          {% set battery_missing = not has_value('sensor.drinks_fridge_environment_lcd_btt01_battery') %}
+          {% set illuminance_missing = not has_value('sensor.drinks_fridge_light_sensor_x35ls_illuminance') %}
+          {% set power_missing = not has_value('sensor.drinks_fridge_power_x59pm_power') %}
+          {% set percentile = states('sensor.drinks_fridge_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [10, percentile + 3] | min if percentile is not none else 10 %}
+          {{
+            temperature_missing
+            or illuminance_missing
+            or (states('sensor.drinks_fridge_environment_lcd_btt01_battery') | float(-1)) <= 20
+            or states('switch.drinks_fridge_power_x59pm') != 'on'
+            or power_missing
+            or is_state('binary_sensor.drinks_fridge_power_draw_lost', 'on')
+            or is_state('binary_sensor.drinks_fridge_door_open_too_long', 'on')
+            or (
+              not temperature_missing
+              and not is_state('binary_sensor.drinks_fridge_temperature_recovery_grace', 'on')
+              and (states('sensor.drinks_fridge_environment_lcd_btt01_temperature') | float(0)) > threshold
+            )
+          }}
+        attributes:
+          appliance: "Drinks Fridge"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.drinks_fridge_environment_lcd_btt01_temperature') %}
+            {% set battery_missing = not has_value('sensor.drinks_fridge_environment_lcd_btt01_battery') %}
+            {% set illuminance_missing = not has_value('sensor.drinks_fridge_light_sensor_x35ls_illuminance') %}
+            {% set power_missing = not has_value('sensor.drinks_fridge_power_x59pm_power') %}
+            {% set percentile = states('sensor.drinks_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [10, percentile + 3] | min if percentile is not none else 10 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if illuminance_missing %}
+              {% set ns.items = ns.items + ['Door monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.drinks_fridge_environment_lcd_btt01_battery') | float(-1)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if states('switch.drinks_fridge_power_x59pm') in ['unknown', 'unavailable'] or power_missing %}
+              {% set ns.items = ns.items + ['Power monitoring unavailable'] %}
+            {% elif not is_state('switch.drinks_fridge_power_x59pm', 'on') %}
+              {% set ns.items = ns.items + ['Power switched off'] %}
+            {% elif is_state('binary_sensor.drinks_fridge_power_draw_lost', 'on') %}
+              {% set ns.items = ns.items + ['Power lost - no power draw for 4 hours'] %}
+            {% endif %}
+            {% if is_state('binary_sensor.drinks_fridge_door_open_too_long', 'on') %}
+              {% set ns.items = ns.items + ['Door open too long'] %}
+            {% elif not temperature_missing and is_state('binary_sensor.drinks_fridge_temperature_recovery_grace', 'on') %}
+              {% set ns.items = ns.items + ['Temperature alert delayed - door recently open'] %}
+            {% elif not temperature_missing and (states('sensor.drinks_fridge_environment_lcd_btt01_temperature') | float(0)) > threshold %}
+              {% if (states('sensor.drinks_fridge_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.drinks_fridge_environment_lcd_btt01_temperature') }}"
+          average_7_days: "{{ states('sensor.drinks_fridge_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.drinks_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [10, percentile + 3] | min if percentile is not none else 10 }}
+          change_rate: "{{ states('sensor.drinks_fridge_temperature_change_rate') }}"
+          battery: "{{ states('sensor.drinks_fridge_environment_lcd_btt01_battery') }}"
+          power: "{{ states('sensor.drinks_fridge_power_x59pm_power') }}"
+          door_open: "{{ is_state('binary_sensor.drinks_fridge_door_open', 'on') }}"
+          illuminance: "{{ states('sensor.drinks_fridge_light_sensor_x35ls_illuminance') }}"
+
+      - name: "Wine Fridge Issue"
+        unique_id: wine_fridge_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.lcd_temp_humidity_btt04_temperature') %}
+          {% set battery_missing = not has_value('sensor.lcd_temp_humidity_btt04_battery') %}
+          {% set percentile = states('sensor.wine_fridge_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [9, percentile + 0.5] | min if percentile is not none else 9 %}
+          {{
+            temperature_missing
+            or (states('sensor.lcd_temp_humidity_btt04_battery') | float(-1)) <= 20
+            or (not temperature_missing and (states('sensor.lcd_temp_humidity_btt04_temperature') | float(0)) > threshold)
+          }}
+        attributes:
+          appliance: "Wine Fridge"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.lcd_temp_humidity_btt04_temperature') %}
+            {% set battery_missing = not has_value('sensor.lcd_temp_humidity_btt04_battery') %}
+            {% set percentile = states('sensor.wine_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [9, percentile + 0.5] | min if percentile is not none else 9 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.lcd_temp_humidity_btt04_battery') | float(-1)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if not temperature_missing and (states('sensor.lcd_temp_humidity_btt04_temperature') | float(0)) > threshold %}
+              {% if (states('sensor.wine_fridge_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.lcd_temp_humidity_btt04_temperature') }}"
+          average_7_days: "{{ states('sensor.wine_fridge_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.wine_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [9, percentile + 0.5] | min if percentile is not none else 9 }}
+          change_rate: "{{ states('sensor.wine_fridge_temperature_change_rate') }}"
+          battery: "{{ states('sensor.lcd_temp_humidity_btt04_battery') }}"
+
+      - name: "Downstairs Fridge Issue"
+        unique_id: downstairs_fridge_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_temperature') %}
+          {% set battery_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_battery') %}
+          {% set illuminance_missing = not has_value('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') %}
+          {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
+          {% set percentile = states('sensor.downstairs_fridge_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [10, percentile + 0.5] | min if percentile is not none else 10 %}
+          {{
+            temperature_missing
+            or illuminance_missing
+            or (states('sensor.downstairs_fridge_temperature_x43ts_battery') | float(-1)) <= 20
+            or is_state('binary_sensor.downstairs_fridge_door_open_too_long', 'on')
+            or (
+              not temperature_missing
+              and not is_state('binary_sensor.downstairs_fridge_temperature_recovery_grace', 'on')
+              and (states('sensor.downstairs_fridge_temperature_x43ts_temperature') | float(0)) > threshold
+            )
+            or power_missing
+            or is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on')
+          }}
+        attributes:
+          appliance: "Downstairs Fridge"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_temperature') %}
+            {% set battery_missing = not has_value('sensor.downstairs_fridge_temperature_x43ts_battery') %}
+            {% set illuminance_missing = not has_value('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') %}
+            {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
+            {% set percentile = states('sensor.downstairs_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [10, percentile + 0.5] | min if percentile is not none else 10 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if illuminance_missing %}
+              {% set ns.items = ns.items + ['Door monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.downstairs_fridge_temperature_x43ts_battery') | float(-1)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if power_missing %}
+              {% set ns.items = ns.items + ['Power monitoring unavailable'] %}
+            {% elif is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on') %}
+              {% set ns.items = ns.items + ['Power lost - no power draw for 4 hours'] %}
+            {% endif %}
+            {% if is_state('binary_sensor.downstairs_fridge_door_open_too_long', 'on') %}
+              {% set ns.items = ns.items + ['Door open too long'] %}
+            {% elif not temperature_missing and is_state('binary_sensor.downstairs_fridge_temperature_recovery_grace', 'on') %}
+              {% set ns.items = ns.items + ['Temperature alert delayed - door recently open'] %}
+            {% elif not temperature_missing and (states('sensor.downstairs_fridge_temperature_x43ts_temperature') | float(0)) > threshold %}
+              {% if (states('sensor.downstairs_fridge_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.downstairs_fridge_temperature_x43ts_temperature') }}"
+          humidity: "{{ states('sensor.downstairs_fridge_temperature_x43ts_humidity') }}"
+          average_7_days: "{{ states('sensor.downstairs_fridge_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.downstairs_fridge_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [10, percentile + 0.5] | min if percentile is not none else 10 }}
+          change_rate: "{{ states('sensor.downstairs_fridge_temperature_change_rate') }}"
+          battery: "{{ states('sensor.downstairs_fridge_temperature_x43ts_battery') }}"
+          power: "{{ states('sensor.downstairs_fridge_gpo_power_x68pm_power') }}"
+          door_open: "{{ is_state('binary_sensor.downstairs_fridge_door_open', 'on') }}"
+          illuminance: "{{ states('sensor.downstairs_fridge_light_sensor_x58ls_illuminance') }}"
+
+      - name: "Downstairs Freezer Issue"
+        unique_id: downstairs_freezer_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_temperature') %}
+          {% set battery_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_battery') %}
+          {% set illuminance_missing = not has_value('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') %}
+          {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
+          {% set percentile = states('sensor.downstairs_freezer_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
+          {{
+            temperature_missing
+            or illuminance_missing
+            or (states('sensor.downstairs_freezer_temperature_x70ts_battery') | float(-1)) <= 20
+            or is_state('binary_sensor.downstairs_freezer_door_open_too_long', 'on')
+            or (
+              not temperature_missing
+              and not is_state('binary_sensor.downstairs_freezer_temperature_recovery_grace', 'on')
+              and (states('sensor.downstairs_freezer_temperature_x70ts_temperature') | float(0)) > threshold
+            )
+            or power_missing
+            or is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on')
+          }}
+        attributes:
+          appliance: "Downstairs Freezer"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_temperature') %}
+            {% set battery_missing = not has_value('sensor.downstairs_freezer_temperature_x70ts_battery') %}
+            {% set illuminance_missing = not has_value('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') %}
+            {% set power_missing = not has_value('sensor.downstairs_fridge_gpo_power_x68pm_power') %}
+            {% set percentile = states('sensor.downstairs_freezer_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if illuminance_missing %}
+              {% set ns.items = ns.items + ['Door monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.downstairs_freezer_temperature_x70ts_battery') | float(-1)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if power_missing %}
+              {% set ns.items = ns.items + ['Shared power monitoring unavailable'] %}
+            {% elif is_state('binary_sensor.downstairs_fridge_power_draw_lost', 'on') %}
+              {% set ns.items = ns.items + ['Shared power lost - no power draw for 4 hours'] %}
+            {% endif %}
+            {% if is_state('binary_sensor.downstairs_freezer_door_open_too_long', 'on') %}
+              {% set ns.items = ns.items + ['Door open too long'] %}
+            {% elif not temperature_missing and is_state('binary_sensor.downstairs_freezer_temperature_recovery_grace', 'on') %}
+              {% set ns.items = ns.items + ['Temperature alert delayed - door recently open'] %}
+            {% elif not temperature_missing and (states('sensor.downstairs_freezer_temperature_x70ts_temperature') | float(0)) > threshold %}
+              {% if (states('sensor.downstairs_freezer_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.downstairs_freezer_temperature_x70ts_temperature') }}"
+          humidity: "{{ states('sensor.downstairs_freezer_temperature_x70ts_humidity') }}"
+          average_7_days: "{{ states('sensor.downstairs_freezer_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.downstairs_freezer_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [-5, percentile + 0.5] | min if percentile is not none else -5 }}
+          change_rate: "{{ states('sensor.downstairs_freezer_temperature_change_rate') }}"
+          battery: "{{ states('sensor.downstairs_freezer_temperature_x70ts_battery') }}"
+          power: "{{ states('sensor.downstairs_fridge_gpo_power_x68pm_power') }}"
+          door_open: "{{ is_state('binary_sensor.downstairs_freezer_door_open', 'on') }}"
+          illuminance: "{{ states('sensor.downstairs_freezer_light_sensor_x61ls_illuminance') }}"
+
+      - name: "Drinks Freezer Issue"
+        unique_id: drinks_freezer_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.drinks_freezer_environment_lcd_btt02_temperature') %}
+          {% set battery_missing = not has_value('sensor.drinks_freezer_environment_lcd_btt02_battery') %}
+          {% set power_missing = not has_value('sensor.drinks_fridge_power_x59pm_power') %}
+          {% set percentile = states('sensor.drinks_freezer_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
+          {{
+            temperature_missing
+            or (states('sensor.drinks_freezer_environment_lcd_btt02_battery') | float(-1)) <= 20
+            or states('switch.drinks_fridge_power_x59pm') != 'on'
+            or power_missing
+            or is_state('binary_sensor.drinks_fridge_power_draw_lost', 'on')
+            or (not temperature_missing and (states('sensor.drinks_freezer_environment_lcd_btt02_temperature') | float(0)) > threshold)
+          }}
+        attributes:
+          appliance: "Drinks Freezer"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.drinks_freezer_environment_lcd_btt02_temperature') %}
+            {% set battery_missing = not has_value('sensor.drinks_freezer_environment_lcd_btt02_battery') %}
+            {% set power_missing = not has_value('sensor.drinks_fridge_power_x59pm_power') %}
+            {% set percentile = states('sensor.drinks_freezer_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [-5, percentile + 0.5] | min if percentile is not none else -5 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.drinks_freezer_environment_lcd_btt02_battery') | float(-1)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if states('switch.drinks_fridge_power_x59pm') in ['unknown', 'unavailable'] or power_missing %}
+              {% set ns.items = ns.items + ['Power monitoring unavailable'] %}
+            {% elif not is_state('switch.drinks_fridge_power_x59pm', 'on') %}
+              {% set ns.items = ns.items + ['Power switched off'] %}
+            {% elif is_state('binary_sensor.drinks_fridge_power_draw_lost', 'on') %}
+              {% set ns.items = ns.items + ['Power lost - no power draw for 4 hours'] %}
+            {% endif %}
+            {% if not temperature_missing and (states('sensor.drinks_freezer_environment_lcd_btt02_temperature') | float(0)) > threshold %}
+              {% if (states('sensor.drinks_freezer_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.drinks_freezer_environment_lcd_btt02_temperature') }}"
+          average_7_days: "{{ states('sensor.drinks_freezer_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.drinks_freezer_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [-5, percentile + 0.5] | min if percentile is not none else -5 }}
+          change_rate: "{{ states('sensor.drinks_freezer_temperature_change_rate') }}"
+          battery: "{{ states('sensor.drinks_freezer_environment_lcd_btt02_battery') }}"
+          power: "{{ states('sensor.drinks_fridge_power_x59pm_power') }}"
+
+      - name: "Vertical Freezer Issue"
+        unique_id: vertical_freezer_issue
+        device_class: problem
+        delay_on: "00:01:00"
+        state: >-
+          {% set temperature_missing = not has_value('sensor.lcd_temp_humidity_btt03_temperature') %}
+          {% set battery_missing = not has_value('sensor.lcd_temp_humidity_btt03_battery') %}
+          {% set power_missing = not has_value('sensor.vertical_freezer_power_x60pm_power') %}
+          {% set percentile = states('sensor.vertical_freezer_temperature_95th_percentile_7_days') | float(none) %}
+          {% set threshold = [-10, percentile + 6] | min if percentile is not none else -10 %}
+          {{
+            temperature_missing
+            or (states('sensor.lcd_temp_humidity_btt03_battery') | float(-1)) <= 20
+            or states('switch.vertical_freezer_power_x60pm') != 'on'
+            or power_missing
+            or is_state('binary_sensor.vertical_freezer_power_draw_lost', 'on')
+            or (not temperature_missing and (states('sensor.lcd_temp_humidity_btt03_temperature') | float(0)) > threshold)
+          }}
+        attributes:
+          appliance: "Vertical Freezer"
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set temperature_missing = not has_value('sensor.lcd_temp_humidity_btt03_temperature') %}
+            {% set battery_missing = not has_value('sensor.lcd_temp_humidity_btt03_battery') %}
+            {% set power_missing = not has_value('sensor.vertical_freezer_power_x60pm_power') %}
+            {% set percentile = states('sensor.vertical_freezer_temperature_95th_percentile_7_days') | float(none) %}
+            {% set threshold = [-10, percentile + 6] | min if percentile is not none else -10 %}
+            {% if temperature_missing %}
+              {% set ns.items = ns.items + ['Temperature monitor unavailable'] %}
+            {% endif %}
+            {% if not battery_missing and (states('sensor.lcd_temp_humidity_btt03_battery') | float(-1)) <= 20 %}
+              {% set ns.items = ns.items + ['Low monitor battery'] %}
+            {% endif %}
+            {% if states('switch.vertical_freezer_power_x60pm') in ['unknown', 'unavailable'] or power_missing %}
+              {% set ns.items = ns.items + ['Power monitoring unavailable'] %}
+            {% elif not is_state('switch.vertical_freezer_power_x60pm', 'on') %}
+              {% set ns.items = ns.items + ['Power switched off'] %}
+            {% elif is_state('binary_sensor.vertical_freezer_power_draw_lost', 'on') %}
+              {% set ns.items = ns.items + ['Power lost - no power draw for 4 hours'] %}
+            {% endif %}
+            {% if not temperature_missing and (states('sensor.lcd_temp_humidity_btt03_temperature') | float(0)) > threshold %}
+              {% if (states('sensor.vertical_freezer_temperature_change_rate') | float(0)) >= 2 %}
+                {% set ns.items = ns.items + ['Warming rapidly - possible open door'] %}
+              {% else %}
+                {% set ns.items = ns.items + ['Temperature too high - possible loss of cooling'] %}
+              {% endif %}
+            {% endif %}
+            {{ ns.items }}
+          temperature: "{{ states('sensor.lcd_temp_humidity_btt03_temperature') }}"
+          average_7_days: "{{ states('sensor.vertical_freezer_temperature_average_7_days') }}"
+          alert_threshold: >-
+            {% set percentile = states('sensor.vertical_freezer_temperature_95th_percentile_7_days') | float(none) %}
+            {{ [-10, percentile + 6] | min if percentile is not none else -10 }}
+          change_rate: "{{ states('sensor.vertical_freezer_temperature_change_rate') }}"
+          battery: "{{ states('sensor.lcd_temp_humidity_btt03_battery') }}"
+          power: "{{ states('sensor.vertical_freezer_power_x60pm_power') }}"
+
+  #:######################################################################################:#
+  # SUMMARY STATUS
+  #:######################################################################################:#
+  - sensor:
+      - name: "Fridge Freezer Monitor Status"
+        unique_id: fridge_freezer_monitor_status
+        icon: mdi:fridge-alert-outline
+        state: >-
+          {{
+            'Issue'
+            if is_state('binary_sensor.main_kitchen_fridge_door_open_too_long', 'on')
+            or is_state('binary_sensor.drinks_fridge_door_open_too_long', 'on')
+            or is_state('binary_sensor.downstairs_fridge_door_open_too_long', 'on')
+            or is_state('binary_sensor.downstairs_freezer_door_open_too_long', 'on')
+            else 'Open'
+            if is_state('binary_sensor.main_kitchen_fridge_door_open', 'on')
+            or is_state('binary_sensor.drinks_fridge_door_open', 'on')
+            or is_state('binary_sensor.downstairs_fridge_door_open', 'on')
+            or is_state('binary_sensor.downstairs_freezer_door_open', 'on')
+            else 'Issue'
+            if expand(
+              'binary_sensor.main_kitchen_fridge_issue',
+              'binary_sensor.drinks_fridge_issue',
+              'binary_sensor.downstairs_fridge_issue',
+              'binary_sensor.downstairs_freezer_issue',
+              'binary_sensor.wine_fridge_issue',
+              'binary_sensor.drinks_freezer_issue',
+              'binary_sensor.vertical_freezer_issue'
+            )
+            | selectattr('state', 'eq', 'on')
+            | list
+            | count > 0
+            else 'OK'
+          }}
+        attributes:
+          issue_count: >-
+            {{
+              expand(
+                'binary_sensor.main_kitchen_fridge_issue',
+                'binary_sensor.drinks_fridge_issue',
+                'binary_sensor.downstairs_fridge_issue',
+                'binary_sensor.downstairs_freezer_issue',
+                'binary_sensor.wine_fridge_issue',
+                'binary_sensor.drinks_freezer_issue',
+                'binary_sensor.vertical_freezer_issue'
+              )
+              | selectattr('state', 'eq', 'on')
+              | list
+              | count
+            }}
+          open_count: >-
+            {{
+              [
+                is_state('binary_sensor.main_kitchen_fridge_door_open', 'on'),
+                is_state('binary_sensor.drinks_fridge_door_open', 'on'),
+                is_state('binary_sensor.downstairs_fridge_door_open', 'on'),
+                is_state('binary_sensor.downstairs_freezer_door_open', 'on')
+              ]
+              | select
+              | list
+              | count
+            }}
+          issues: >-
+            {% set ns = namespace(items=[]) %}
+            {% set monitors = [
+              'binary_sensor.main_kitchen_fridge_issue',
+              'binary_sensor.drinks_fridge_issue',
+              'binary_sensor.downstairs_fridge_issue',
+              'binary_sensor.downstairs_freezer_issue',
+              'binary_sensor.wine_fridge_issue',
+              'binary_sensor.drinks_freezer_issue',
+              'binary_sensor.vertical_freezer_issue'
+            ] %}
+            {% for monitor in monitors if is_state(monitor, 'on') %}
+              {% set appliance = state_attr(monitor, 'appliance') or state_attr(monitor, 'friendly_name') %}
+              {% set reasons = state_attr(monitor, 'issues') or ['Issue detected'] %}
+              {% for reason in reasons %}
+                {% set ns.items = ns.items + [appliance ~ ': ' ~ reason] %}
+              {% endfor %}
+            {% endfor %}
+            {{ ns.items }}

packages/fridge_temperatures.yaml

@@ -1,15 +1,16 @@
 #:########################################################################################:#
 # Package: Refrigerator Temperature MQTT Publishing
 # File:    fridge_temperatures.yaml
-# Version: v1.0.0
-# Date:    2024-09-04
+# Version: v1.2.0
+# Date:    2026-08-30
 #
 # Purpose:
 #   Publishes refrigerator and freezer temperature changes to household MQTT
 #   status topics for use by external displays and consumers.
 #
 # Behaviour:
-#   - Publishes the source sensor state whenever a valid temperature changes.
+#   - Creates a calibrated main kitchen fridge temperature entity.
+#   - Publishes each valid temperature entity state whenever it changes.
 #   - Suppresses unknown and unavailable source states.
 #   - Covers the drinks fridge, drinks freezer, and main kitchen fridge.
 #
@@ -18,9 +19,22 @@
 #   - Home Assistant MQTT integration and broker connectivity.
 #
 # Version History:
+#   - v1.2.0 (2026-08-30): Moved the calibrated main fridge source to X65TS.
+#   - v1.1.0 (2026-08-17): Added the -0.84 C main fridge sensor calibration.
 #   - v1.0.0 (2024-09-04): Initial refrigerator temperature publishing package.
 #:########################################################################################:#
 
+template:
+  - sensor:
+      - name: "Main Kitchen Fridge Temperature Calibrated"
+        unique_id: main_kitchen_fridge_temperature_calibrated
+        device_class: temperature
+        state_class: measurement
+        unit_of_measurement: "°C"
+        availability: "{{ has_value('sensor.main_kitchen_fridge_temperature_x65ts_temperature') }}"
+        state: >-
+          {{ (states('sensor.main_kitchen_fridge_temperature_x65ts_temperature') | float - 0.84) | round(2) }}
+
 automation:
   - id: publish_fridge_temps_drinks_fridge
     alias: publish_fridge_temps_drinks_fridge
@@ -56,7 +70,7 @@ automation:
     alias: publish_main_kitchen_fridge_temp_zth08
     trigger:
       - platform: state
-        entity_id: sensor.main_kitchen_fridge_temp_zth08
+        entity_id: sensor.main_kitchen_fridge_temperature_calibrated
         not_to:
           - "unavailable"
           - "unknown"

packages/garage_corner_light_cctv_motion.yaml

@@ -9,9 +9,12 @@
 #   packages/garage_corner_light_cctv_motion.yaml
 #
 # VERSION:
-#   V1.0 2026-06-29
+#   V1.1 2026-08-31
 #
 # VERSION HISTORY:
+#   V1.1 2026-08-31
+#     - Restrict CCTV motion activation to one hour before sunset through one hour after sunrise.
+#
 #   V1.0 2026-06-29
 #     - Initial package.
 #     - Turns the garage external corner light on when CCTV motion MQTT payload "1" is received.
@@ -20,7 +23,8 @@
 #     - Adds a Home Assistant enable switch for CCTV movement triggers.
 #
 # PURPOSE:
-#   Turns on the garage external corner light from selected CCTV motion MQTT triggers.
+#   Turns on the garage external corner light from selected CCTV motion MQTT triggers
+#   during the configured night window.
 #
 # NOTES:
 #   - The light is:
@@ -31,6 +35,7 @@
 #
 #   - Turning OFF "Garage corner light movement triggers" prevents new CCTV triggers.
 #   - If a timer is already running, it will still finish and turn the light off.
+#   - CCTV triggers run from one hour before sunset until one hour after sunrise.
 #
 #:########################################################################################:#
 # User Configuration                                                                      #
@@ -91,6 +96,12 @@ automation:
         entity_id: input_boolean.garage_corner_light_movement_triggers
         state: "on"
 
+      - condition: sun
+        after: sunset
+        after_offset: "-01:00:00"
+        before: sunrise
+        before_offset: "01:00:00"
+
     action:
       - service: switch.turn_on
         target:

packages/health_checks.yaml

@@ -1,63 +0,0 @@
-#:########################################################################################:#
-# Package: Node-RED Health Checks
-# File:    health_checks.yaml
-# Version: v1.2.0
-# Date:    2025-08-25
-#
-# Purpose:
-#   Monitors the Node-RED Panda instance through independent HTTP and MQTT health
-#   signals and combines them into one connectivity status.
-#
-# Behaviour:
-#   - Polls the HTTP health endpoint every 30 seconds with a three-second timeout.
-#   - Tracks the MQTT birth/will topic with QoS 1 and a 180-second expiry.
-#   - Reports the combined check as available when either source is available.
-#   - Reports the combined check as connected when either source is connected.
-#
-# Dependencies:
-#   - Reachability of the configured Node-RED HTTP health endpoint.
-#   - Home Assistant MQTT integration and the Node-RED birth/will publisher.
-#
-# Version History:
-#   - v1.2.0 (2025-08-25): Reduced MQTT expiry to 180 seconds and clarified the
-#     combined HTTP/MQTT sensor name.
-#   - v1.1.0 (2025-08-22): Split HTTP and MQTT probes and added a combined sensor.
-#   - v1.0.0 (2025-08-21): Initial Node-RED health-check package.
-#:########################################################################################:#
-
-# ---- HTTP health probe ----
-binary_sensor:
-  - platform: rest
-    name: Node-RED Panda Up (HTTP)
-    resource: http://192.168.3.200:1880/healthz
-    method: GET
-    device_class: connectivity
-    value_template: "{{ value_json.status == 'ok' }}"
-    timeout: 3
-    scan_interval: 30
-
-# ---- MQTT Will/Birth probe ----
-mqtt:
-  binary_sensor:
-    - name: "Node-RED Panda Up (MQTT)"
-      unique_id: "nodered_panda_up_mqtt"
-      state_topic: "nodered/panda/status"
-      payload_on: "online"
-      payload_off: "offline"
-      device_class: connectivity
-      qos: 1
-      # Optional: avoid stale 'online' if no updates arrive
-      expire_after: 180
-
-# ---- Combine them (true if either is up) ----
-template:
-  - binary_sensor:
-      - name: "Node-RED Panda Up (HTTP/MQTT)"
-        unique_id: "nodered_panda_up_combined"
-        device_class: connectivity
-        state: >
-          {{ is_state('binary_sensor.node_red_panda_up_http','on')
-            or is_state('binary_sensor.node_red_panda_up_mqtt','on') }}
-        availability: >
-          {{ states('binary_sensor.node_red_panda_up_http') not in ['unknown','unavailable']
-            or states('binary_sensor.node_red_panda_up_mqtt') not in ['unknown','unavailable'] }}

packages/jobs_tracker_appliance_completion_triggers.yaml

@@ -9,7 +9,7 @@
 #   jobs_tracker_appliance_completion_triggers.yaml
 #
 # VERSION:
-#   V1.0 2026-08-15
+#   V1.1 2026-09-03
 #
 # PURPOSE:
 #   Provides time-qualified appliance door and lid triggers for Jobs Tracker completion.
@@ -19,9 +19,13 @@
 #
 # OPERATION:
 #   Each contact must remain open for five seconds before its corresponding Jobs Tracker
-#   completion route is called. The job registry owns the completion entity mappings.
+#   completion route is called. Starting the dryer or washer clears only a previous Due
+#   unload job, so the next finished cycle creates its own new unload task.
 #
 # VERSION HISTORY:
+#   V1.1 2026-09-03
+#     - Clear a pending dryer or washer unload job when its next cycle starts.
+#
 #   V1.0 2026-08-15
 #     - Added five-second door and lid open completion triggers for dryer and washer jobs.
 #
@@ -63,3 +67,43 @@ automation:
         data:
           completion_entity: binary_sensor.washing_machine_lid_status_x39rs_contact
           completion_to_state: "on"
+
+  - id: jobs_tracker_clear_dryer_unload_on_start
+    alias: "Jobs Tracker - Clear Dryer Unload on Start"
+    description: "Clears an outstanding Empty the Dryer job when a new dryer cycle starts."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: sensor.appliance_monitor_dryer_monitor
+        to: Operating
+
+    conditions:
+      - condition: state
+        entity_id: sensor.jobs_tracker_empty_dryer
+        state: Due
+
+    actions:
+      - action: script.jobs_tracker_dispatch
+        data:
+          job_id: empty_dryer
+
+  - id: jobs_tracker_clear_washer_unload_on_start
+    alias: "Jobs Tracker - Clear Washer Unload on Start"
+    description: "Clears an outstanding Empty the Washer job when a new washer cycle starts."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: sensor.appliance_monitor_washing_machine_monitor
+        to: Operating
+
+    conditions:
+      - condition: state
+        entity_id: sensor.jobs_tracker_empty_washing_machine
+        state: Due
+
+    actions:
+      - action: script.jobs_tracker_dispatch
+        data:
+          job_id: empty_washing_machine

packages/jobs_tracker_appliance_completion_triggers.yaml.bak

@@ -0,0 +1,65 @@
+#:########################################################################################:#
+# Jobs Tracker Appliance Completion Triggers Package                                      #
+#:########################################################################################:#
+#
+# TITLE:
+#   Jobs Tracker Appliance Completion Triggers
+#
+# FILE:
+#   jobs_tracker_appliance_completion_triggers.yaml
+#
+# VERSION:
+#   V1.0 2026-08-15
+#
+# PURPOSE:
+#   Provides time-qualified appliance door and lid triggers for Jobs Tracker completion.
+#
+# DEPENDS ON:
+#   packages/Job_Chore_Tracking/jobs_tracker_jobs.yaml V3.5 or newer.
+#
+# OPERATION:
+#   Each contact must remain open for five seconds before its corresponding Jobs Tracker
+#   completion route is called. The job registry owns the completion entity mappings.
+#
+# VERSION HISTORY:
+#   V1.0 2026-08-15
+#     - Added five-second door and lid open completion triggers for dryer and washer jobs.
+#
+#:########################################################################################:#
+
+automation:
+  - id: jobs_tracker_empty_dryer_door_open
+    alias: "Jobs Tracker - Empty Dryer on Door Open"
+    description: "Marks Empty the Dryer complete after the dryer door is open for five seconds."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: binary_sensor.dryer_door_status_x34rs_contact
+        to: "on"
+        for:
+          seconds: 5
+
+    actions:
+      - action: script.jobs_tracker_route_completion
+        data:
+          completion_entity: binary_sensor.dryer_door_status_x34rs_contact
+          completion_to_state: "on"
+
+  - id: jobs_tracker_empty_washing_machine_lid_open
+    alias: "Jobs Tracker - Empty Washer on Lid Open"
+    description: "Marks Empty the Washer complete after the washer lid is open for five seconds."
+    mode: single
+
+    triggers:
+      - trigger: state
+        entity_id: binary_sensor.washing_machine_lid_status_x39rs_contact
+        to: "on"
+        for:
+          seconds: 5
+
+    actions:
+      - action: script.jobs_tracker_route_completion
+        data:
+          completion_entity: binary_sensor.washing_machine_lid_status_x39rs_contact
+          completion_to_state: "on"

packages/lounge_ir_sensor_actions.yaml

@@ -163,7 +163,7 @@ automation:
                 data:
                   channels: "sony_tv_lounge"
                   title: "View Road"
-                  short_announcement: "Rinnai Gas Heater"
+                  short_announcement: "Gas Fire {{ new_state_text }}"
                   long_announcement: ""
                   payload: "{{ new_state_text }}"
                   indicator: ""

packages/master_bedroom_4_button_switches.yaml

@@ -54,8 +54,8 @@ automation:
     max: 10
 
     variables:
-      west_switch_mqtt_topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
-      east_switch_mqtt_topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+      west_switch_mqtt_topic: "zigbee2mqtt/Master Bedroom Scene Switch West (X54SS)"
+      east_switch_mqtt_topic: "zigbee2mqtt/Master Bedroom Scene Switch East (X55SS)"
 
       bedside_light: "switch.master_bedroom_bedside_lamp_arlec_bulb_master_bedroom_bedside_lamp_arlec_bulb_jump_fade_up_down"
       main_bedroom_south_lights: "switch.master_bedroom_master_bedroom_main_lights_south_relay_2_master_bedroom_south_lights"
@@ -64,50 +64,50 @@ automation:
     triggers:
       # West switch actions
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch West (X54SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "1_single"
         id: west_top_left
 
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch West (X54SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "2_single"
         id: west_top_right
 
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch West (X54SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "3_single"
         id: west_bottom_left
 
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (West)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch West (X54SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "4_single"
         id: west_bottom_right
 
       # East switch actions
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch East (X55SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "1_single"
         id: east_top_left
 
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch East (X55SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "2_single"
         id: east_top_right
 
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch East (X55SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "3_single"
         id: east_bottom_left
 
       - trigger: mqtt
-        topic: "zigbee2mqtt/Master Bedroom 4 Button Switch (East)"
+        topic: "zigbee2mqtt/Master Bedroom Scene Switch East (X55SS)"
         value_template: "{{ value_json.action | default('') }}"
         payload: "4_single"
         id: east_bottom_right

packages/network_monitoring.yaml

@@ -0,0 +1,510 @@
+#:########################################################################################:#
+# Package: Network Monitoring
+# File:    network_monitoring.yaml
+# Version: v1.3.0
+# Date:    2026-08-28
+#
+# Purpose:
+#   Supplies the calculated Internet, router, MQTT, and Home Assistant health
+#   information for general network monitoring, including the independent
+#   Panda and Beaver MQTT brokers, plus Node-RED Panda.
+#
+# Behaviour:
+#   - Tracks daily and seven-day Internet speed-test peaks.
+#   - Calculates rolling 24-hour and seven-day WAN traffic averages and peaks.
+#   - Measures external HTTP latency and tracks the current public IP address.
+#   - Monitors the Panda MQTT broker through Home Assistant's birth topic and
+#     Beaver's MQTT listener through a direct TCP probe.
+#   - Monitors Node-RED Panda through independent HTTP and MQTT signals.
+#   - Retains the latest outage time for each monitored network service.
+#
+# Dependencies:
+#   - packages/internet_monitoring.yaml
+#   - packages/edgerouter_snmp.yaml
+#   - MQTT integration with the default homeassistant/status birth topic.
+#   - Existing Zigbee2MQTT connectivity entity.
+#
+# Notes:
+#   - WAN traffic source values are kB/s and retain that unit in statistics.
+#   - The 24-hour and seven-day traffic values are rolling windows.
+#   - Home Assistant's own last outage is represented by sensor.uptime because
+#     Home Assistant cannot record an event while Core itself is offline.
+#   - Public IP data is fetched from api.ipify.org every five minutes.
+#
+# Version History:
+#   - v1.3.0 (2026-08-28): Renamed package for general network use.
+#   - v1.2.0 (2026-08-28): Consolidated Node-RED Panda monitoring.
+#   - v1.1.0 (2026-08-28): Added Beaver MQTT and HA Core health monitoring.
+#   - v1.0.0 (2026-08-15): Initial monitoring and outage tracking package.
+#:########################################################################################:#
+
+command_line:
+  #:######################################################################################:#
+  # EXTERNAL NETWORK INFORMATION
+  #:######################################################################################:#
+  - sensor:
+      name: "Flounder External IP"
+      unique_id: flounder_external_ip
+      command: >-
+        curl --fail --silent --show-error --max-time 10 https://api.ipify.org
+      command_timeout: 15
+      scan_interval: 300
+
+  - sensor:
+      name: "Flounder Internet Response Time"
+      unique_id: flounder_internet_response_time
+      command: >-
+        curl --fail --silent --show-error --max-time 10 --output /dev/null
+        --write-out "%{time_total}" https://one.one.one.one/cdn-cgi/trace
+      command_timeout: 15
+      scan_interval: 60
+      unit_of_measurement: "ms"
+      device_class: duration
+      state_class: measurement
+      value_template: "{{ ((value | float(0)) * 1000) | round(0) }}"
+
+  - binary_sensor:
+      name: "Flounder Beaver MQTT Broker Connected"
+      unique_id: flounder_beaver_mqtt_broker_connected
+      command: >-
+        timeout 5 bash -c '>/dev/tcp/172.31.6.1/1883' && echo ON || echo OFF
+      command_timeout: 6
+      scan_interval: 60
+      device_class: connectivity
+
+mqtt:
+  #:######################################################################################:#
+  # MQTT BROKER CONNECTION
+  #:######################################################################################:#
+  binary_sensor:
+    - name: "Flounder MQTT Broker Connected"
+      unique_id: flounder_mqtt_broker_connected
+      state_topic: "homeassistant/status"
+      payload_on: "online"
+      payload_off: "offline"
+      device_class: connectivity
+
+    - name: "Node-RED Panda Up (MQTT)"
+      unique_id: nodered_panda_up_mqtt
+      state_topic: "nodered/panda/status"
+      payload_on: "online"
+      payload_off: "offline"
+      device_class: connectivity
+      qos: 1
+      expire_after: 180
+
+binary_sensor:
+  #:######################################################################################:#
+  # NODE-RED PANDA HTTP HEALTH
+  #:######################################################################################:#
+  - platform: rest
+    name: "Node-RED Panda Up (HTTP)"
+    resource: http://192.168.3.200:1880/healthz
+    method: GET
+    device_class: connectivity
+    value_template: "{{ value_json.status == 'ok' }}"
+    timeout: 3
+    scan_interval: 30
+
+input_number:
+  #:######################################################################################:#
+  # DAILY SPEED-TEST PEAKS
+  #:######################################################################################:#
+  flounder_internet_download_peak_today:
+    name: "Flounder Internet Download Peak Today"
+    min: 0
+    max: 10000
+    step: 0.01
+    mode: box
+
+  flounder_internet_upload_peak_today:
+    name: "Flounder Internet Upload Peak Today"
+    min: 0
+    max: 10000
+    step: 0.01
+    mode: box
+
+input_datetime:
+  #:######################################################################################:#
+  # LAST EXTERNAL IP CHANGE
+  #:######################################################################################:#
+  flounder_external_ip_last_changed:
+    name: "Flounder External IP Last Changed"
+    has_date: true
+    has_time: true
+
+input_text:
+  #:######################################################################################:#
+  # LAST OUTAGE TIMES
+  #:######################################################################################:#
+  flounder_internet_last_outage:
+    name: "Flounder Internet Last Outage"
+    max: 40
+
+  flounder_edgerouter_last_outage:
+    name: "Flounder EdgeRouter Last Outage"
+    max: 40
+
+  flounder_mqtt_broker_last_outage:
+    name: "Flounder MQTT Broker Last Outage"
+    max: 40
+
+  flounder_node_red_mqtt_last_outage:
+    name: "Flounder Node-RED MQTT Last Outage"
+    max: 40
+
+  flounder_zigbee2mqtt_2_last_outage:
+    name: "Flounder Zigbee2MQTT 2 Last Outage"
+    max: 40
+
+  flounder_zigbee2mqtt_3_last_outage:
+    name: "Flounder Zigbee2MQTT 3 Last Outage"
+    max: 40
+
+template:
+  #:######################################################################################:#
+  # POPUP STATUS AND SPEED-TEST VALUES
+  #:######################################################################################:#
+  - binary_sensor:
+      - name: "Flounder EdgeRouter Online"
+        unique_id: flounder_edgerouter_online
+        device_class: connectivity
+        state: "{{ has_value('sensor.edgerouter_uptime') }}"
+
+      - name: "Flounder HA Core Online"
+        unique_id: flounder_ha_core_online
+        device_class: connectivity
+        state: "{{ has_value('sensor.home_assistant_core_uptime') }}"
+
+      - name: "Node-RED Panda Up (HTTP/MQTT)"
+        unique_id: nodered_panda_up_combined
+        device_class: connectivity
+        state: >-
+          {{
+            is_state('binary_sensor.node_red_panda_up_http', 'on')
+            or is_state('binary_sensor.node_red_panda_up_mqtt', 'on')
+          }}
+        availability: >-
+          {{
+            states('binary_sensor.node_red_panda_up_http')
+            not in ['unknown', 'unavailable']
+            or states('binary_sensor.node_red_panda_up_mqtt')
+            not in ['unknown', 'unavailable']
+          }}
+
+  - sensor:
+      - name: "Flounder Internet Download Peak Today"
+        unique_id: flounder_internet_download_peak_today
+        unit_of_measurement: "Mbit/s"
+        device_class: data_rate
+        state_class: measurement
+        state: >-
+          {{ states('input_number.flounder_internet_download_peak_today') | float(0) }}
+
+      - name: "Flounder Internet Upload Peak Today"
+        unique_id: flounder_internet_upload_peak_today
+        unit_of_measurement: "Mbit/s"
+        device_class: data_rate
+        state_class: measurement
+        state: >-
+          {{ states('input_number.flounder_internet_upload_peak_today') | float(0) }}
+
+sensor:
+  #:######################################################################################:#
+  # INTERNET SPEED-TEST PEAKS
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Flounder Internet Download Peak 7 Days"
+    unique_id: flounder_internet_download_peak_7_days
+    entity_id: sensor.internet_speed_test
+    state_characteristic: value_max
+    max_age:
+      days: 7
+    precision: 2
+
+  - platform: statistics
+    name: "Flounder Internet Upload Peak 7 Days"
+    unique_id: flounder_internet_upload_peak_7_days
+    entity_id: sensor.internet_upload_speed_test
+    state_characteristic: value_max
+    max_age:
+      days: 7
+    precision: 2
+
+  #:######################################################################################:#
+  # WAN DOWNLOAD TRAFFIC STATISTICS
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Flounder WAN Download Average 24 Hours"
+    unique_id: flounder_wan_download_average_24_hours
+    entity_id: sensor.edgerouter_wan_download_rate
+    state_characteristic: average_step
+    max_age:
+      hours: 24
+    precision: 1
+
+  - platform: statistics
+    name: "Flounder WAN Download Peak 24 Hours"
+    unique_id: flounder_wan_download_peak_24_hours
+    entity_id: sensor.edgerouter_wan_download_rate
+    state_characteristic: value_max
+    max_age:
+      hours: 24
+    precision: 1
+
+  - platform: statistics
+    name: "Flounder WAN Download Average 7 Days"
+    unique_id: flounder_wan_download_average_7_days
+    entity_id: sensor.edgerouter_wan_download_rate
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Flounder WAN Download Peak 7 Days"
+    unique_id: flounder_wan_download_peak_7_days
+    entity_id: sensor.edgerouter_wan_download_rate
+    state_characteristic: value_max
+    max_age:
+      days: 7
+    precision: 1
+
+  #:######################################################################################:#
+  # WAN UPLOAD TRAFFIC STATISTICS
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Flounder WAN Upload Average 24 Hours"
+    unique_id: flounder_wan_upload_average_24_hours
+    entity_id: sensor.edgerouter_wan_upload_rate
+    state_characteristic: average_step
+    max_age:
+      hours: 24
+    precision: 1
+
+  - platform: statistics
+    name: "Flounder WAN Upload Peak 24 Hours"
+    unique_id: flounder_wan_upload_peak_24_hours
+    entity_id: sensor.edgerouter_wan_upload_rate
+    state_characteristic: value_max
+    max_age:
+      hours: 24
+    precision: 1
+
+  - platform: statistics
+    name: "Flounder WAN Upload Average 7 Days"
+    unique_id: flounder_wan_upload_average_7_days
+    entity_id: sensor.edgerouter_wan_upload_rate
+    state_characteristic: average_step
+    max_age:
+      days: 7
+    precision: 1
+
+  - platform: statistics
+    name: "Flounder WAN Upload Peak 7 Days"
+    unique_id: flounder_wan_upload_peak_7_days
+    entity_id: sensor.edgerouter_wan_upload_rate
+    state_characteristic: value_max
+    max_age:
+      days: 7
+    precision: 1
+
+  #:######################################################################################:#
+  # EXTERNAL RESPONSE-TIME STATISTICS
+  #:######################################################################################:#
+  - platform: statistics
+    name: "Flounder Internet Response Time Average 24 Hours"
+    unique_id: flounder_internet_response_time_average_24_hours
+    entity_id: sensor.flounder_internet_response_time
+    state_characteristic: average_step
+    max_age:
+      hours: 24
+    precision: 0
+
+  - platform: statistics
+    name: "Flounder Internet Response Time Peak 24 Hours"
+    unique_id: flounder_internet_response_time_peak_24_hours
+    entity_id: sensor.flounder_internet_response_time
+    state_characteristic: value_max
+    max_age:
+      hours: 24
+    precision: 0
+
+automation:
+  #:######################################################################################:#
+  # SPEED-TEST PEAK TRACKING
+  #:######################################################################################:#
+  - id: flounder_network_record_speed_test_peaks
+    alias: "Flounder Network: Record speed-test peaks"
+    triggers:
+      - trigger: state
+        entity_id: sensor.internet_speed_test
+    conditions: []
+    actions:
+      - delay:
+          seconds: 1
+      - condition: template
+        value_template: >-
+          {{
+            has_value('sensor.internet_speed_test')
+            and has_value('sensor.internet_upload_speed_test')
+          }}
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.flounder_internet_download_peak_today
+        data:
+          value: >-
+            {{
+              [
+                states('sensor.internet_speed_test') | float(0),
+                states('input_number.flounder_internet_download_peak_today') | float(0)
+              ]
+              | max
+            }}
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.flounder_internet_upload_peak_today
+        data:
+          value: >-
+            {{
+              [
+                states('sensor.internet_upload_speed_test') | float(0),
+                states('input_number.flounder_internet_upload_peak_today') | float(0)
+              ]
+              | max
+            }}
+    mode: queued
+
+  - id: flounder_network_reset_daily_speed_test_peaks
+    alias: "Flounder Network: Reset daily speed-test peaks"
+    triggers:
+      - trigger: time
+        at: "00:00:00"
+    conditions: []
+    actions:
+      - action: input_number.set_value
+        target:
+          entity_id:
+            - input_number.flounder_internet_download_peak_today
+            - input_number.flounder_internet_upload_peak_today
+        data:
+          value: 0
+    mode: single
+
+  #:######################################################################################:#
+  # PUBLIC IP CHANGE TRACKING
+  #:######################################################################################:#
+  - id: flounder_network_record_external_ip_change
+    alias: "Flounder Network: Record external IP change"
+    triggers:
+      - trigger: state
+        entity_id: sensor.flounder_external_ip
+    conditions:
+      - condition: template
+        value_template: >-
+          {{
+            trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable', 'none', '']
+            and (
+              trigger.from_state is none
+              or trigger.from_state.state != trigger.to_state.state
+            )
+          }}
+    actions:
+      - action: input_datetime.set_datetime
+        target:
+          entity_id: input_datetime.flounder_external_ip_last_changed
+        data:
+          timestamp: "{{ now().timestamp() }}"
+    mode: single
+
+  #:######################################################################################:#
+  # SERVICE OUTAGE TRACKING
+  #:######################################################################################:#
+  - id: flounder_network_record_service_outages
+    alias: "Flounder Network: Record service outages"
+    triggers:
+      - trigger: state
+        entity_id: binary_sensor.internet_connected
+        id: internet
+      - trigger: state
+        entity_id: binary_sensor.flounder_edgerouter_online
+        id: edgerouter
+      - trigger: state
+        entity_id: binary_sensor.flounder_mqtt_broker_connected
+        id: mqtt_broker
+      - trigger: state
+        entity_id: binary_sensor.flounder_beaver_mqtt_broker_connected
+        id: beaver_mqtt_broker
+      - trigger: state
+        entity_id: binary_sensor.node_red_panda_up_2
+        id: node_red_mqtt
+      - trigger: state
+        entity_id: binary_sensor.zigbee2mqtt_bridge_connection_state_2
+        id: zigbee2mqtt_2
+      - trigger: state
+        entity_id: binary_sensor.zigbee2mqtt_bridge_connection_state_3
+        id: zigbee2mqtt_3
+    conditions:
+      - condition: template
+        value_template: >-
+          {{
+            trigger.to_state is not none
+            and trigger.to_state.state in ['off', 'unavailable']
+            and (
+              trigger.from_state is none
+              or trigger.from_state.state not in ['off', 'unavailable']
+            )
+          }}
+    actions:
+      - choose:
+          - conditions: "{{ trigger.id == 'internet' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_internet_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+          - conditions: "{{ trigger.id == 'edgerouter' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_edgerouter_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+          - conditions: "{{ trigger.id == 'mqtt_broker' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_mqtt_broker_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+          - conditions: "{{ trigger.id == 'beaver_mqtt_broker' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_mqtt_broker_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+          - conditions: "{{ trigger.id == 'node_red_mqtt' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_node_red_mqtt_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+          - conditions: "{{ trigger.id == 'zigbee2mqtt_2' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_zigbee2mqtt_2_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+          - conditions: "{{ trigger.id == 'zigbee2mqtt_3' }}"
+            sequence:
+              - action: input_text.set_value
+                target:
+                  entity_id: input_text.flounder_zigbee2mqtt_3_last_outage
+                data:
+                  value: "{{ now().isoformat() }}"
+    mode: queued

packages/office_lights_power_backup_occupancy.yaml

@@ -3,6 +3,11 @@
 ################################################################################
 #
 # Version:
+# - 1.2 - 2026-08-16
+#   - Removed the spare-button trigger after false presses caused unintended
+#     power toggles.
+#   - Retains occupancy-based backup control for Office power supplies.
+#
 # - 1.1 - 2026-07-25
 #   - Stripped light control (now handled by direct MQTT)
 #   - Retains power supply backup control only
@@ -20,16 +25,9 @@
 # - Turns Office power supplies off after the Office mmWave occupancy sensor
 #   has been clear for the configured delay period.
 #
-# - Provides a backup manual control path using the Office spare button.
-#   This is useful if the occupancy sensor is offline.
-#
 # Notes:
 # - This is treated as a BACKUP automation for POWER SUPPLIES ONLY.
 # - Light control is handled by direct ESPHome/MQTT (see device YAMLs).
-# - The physical spare button is read using:
-#     binary_sensor.esp_officelights_button_3_spare
-# - The spare relay is used as the manual master/latch state:
-#     switch.esp_officelights_relay_3_spare
 #
 ################################################################################
 
@@ -58,9 +56,8 @@ automation:
     description: >
       Backup automation for Office power supplies. Turns power on when Office
       mmWave occupancy or movement is detected. Turns power off after the
-      occupancy sensor is clear for the configured delay period. Also allows
-      manual backup toggling using the Office spare button and spare relay.
-      Light control is handled by direct ESPHome/MQTT sync.
+      occupancy sensor is clear for the configured delay period. Light control
+      is handled by direct ESPHome/MQTT sync.
     mode: restart
     triggers:
       ##########################################################################
@@ -79,19 +76,6 @@ automation:
         to: "off"
         id: occupancy_clear
 
-      ##########################################################################
-      # Manual backup button press.
-      #
-      # The spare relay state is used as the master/latch:
-      # - If spare relay is OFF when the button is pressed, turn power ON.
-      # - If spare relay is ON when the button is pressed, turn power OFF.
-      ##########################################################################
-      - trigger: state
-        entity_id: binary_sensor.esp_officelights_button_3_spare
-        from: "off"
-        to: "on"
-        id: backup_button_pressed
-
       ##########################################################################
       # Startup check.
       #
@@ -214,102 +198,3 @@ automation:
                   - action: switch.turn_off
                     target:
                       entity_id: switch.esp_officelights_relay_3_spare
-
-          ######################################################################
-          # MANUAL BACKUP LOGIC:
-          # Button pressed while spare relay master is ON - turn power off.
-          ######################################################################
-          - alias: "Backup button pressed - spare relay on, turn power off"
-            conditions:
-              - condition: trigger
-                id: backup_button_pressed
-              - condition: state
-                entity_id: switch.esp_officelights_relay_3_spare
-                state: "on"
-            sequence:
-              ##############################################################
-              # Power off.
-              ##############################################################
-              - alias: "Turn off Office right hand GPO if needed"
-                if:
-                  - condition: state
-                    entity_id: switch.esp_officedeskrightgpo_office_right_hand_gpo
-                    state: "on"
-                then:
-                  - action: switch.turn_off
-                    target:
-                      entity_id: switch.esp_officedeskrightgpo_office_right_hand_gpo
-
-              - alias: "Turn off Office ELV power supply if needed"
-                if:
-                  - condition: state
-                    entity_id: switch.esp_officeelvcontrol_office_elv_power_supply
-                    state: "on"
-                then:
-                  - action: switch.turn_off
-                    target:
-                      entity_id: switch.esp_officeelvcontrol_office_elv_power_supply
-
-              ##############################################################
-              # Manual master/latch relay off last.
-              ##############################################################
-              - alias: "Turn off Office spare relay master if needed"
-                if:
-                  - condition: state
-                    entity_id: switch.esp_officelights_relay_3_spare
-                    state: "on"
-                then:
-                  - action: switch.turn_off
-                    target:
-                      entity_id: switch.esp_officelights_relay_3_spare
-
-          ######################################################################
-          # MANUAL BACKUP LOGIC:
-          # Button pressed while spare relay master is OFF - turn power on.
-          #
-          # No off timer is started from this manual press. If the occupancy
-          # sensor later changes to clear, the normal clear-delay logic will run.
-          ######################################################################
-          - alias: "Backup button pressed - spare relay off, turn power on"
-            conditions:
-              - condition: trigger
-                id: backup_button_pressed
-              - condition: state
-                entity_id: switch.esp_officelights_relay_3_spare
-                state: "off"
-            sequence:
-              ##############################################################
-              # Power supplies.
-              ##############################################################
-              - alias: "Turn on Office ELV power supply if needed"
-                if:
-                  - condition: state
-                    entity_id: switch.esp_officeelvcontrol_office_elv_power_supply
-                    state: "off"
-                then:
-                  - action: switch.turn_on
-                    target:
-                      entity_id: switch.esp_officeelvcontrol_office_elv_power_supply
-
-              - alias: "Turn on Office right hand GPO if needed"
-                if:
-                  - condition: state
-                    entity_id: switch.esp_officedeskrightgpo_office_right_hand_gpo
-                    state: "off"
-                then:
-                  - action: switch.turn_on
-                    target:
-                      entity_id: switch.esp_officedeskrightgpo_office_right_hand_gpo
-
-              ##############################################################
-              # Manual master/latch relay.
-              ##############################################################
-              - alias: "Turn on Office spare relay master if needed"
-                if:
-                  - condition: state
-                    entity_id: switch.esp_officelights_relay_3_spare
-                    state: "off"
-                then:
-                  - action: switch.turn_on
-                    target:
-                      entity_id: switch.esp_officelights_relay_3_spare

packages/outdoor_lighting_control.yaml

@@ -635,8 +635,11 @@ script:
               entity_id: input_datetime.outdoor_lighting_number_16_last_schedule_event
             data:
               datetime: "{{ (selected_event_ts | int(0)) | timestamp_custom('%Y-%m-%d %H:%M:%S', true) }}"
-          - action: script.outdoor_lighting_ramp_number_16
+          - action: script.turn_on
+            target:
+              entity_id: script.outdoor_lighting_ramp_number_16
             data:
+              variables:
                 target_brightness: "{{ selected_target | int(0) }}"
                 ramp_seconds: "{{ ramp_to_use | int(0) }}"
 
@@ -787,8 +790,11 @@ script:
                   entity_id: input_datetime.outdoor_lighting_main_entrance_last_schedule_event
                 data:
                   datetime: "{{ (selected_event_ts | int(0)) | timestamp_custom('%Y-%m-%d %H:%M:%S', true) }}"
-          - action: script.outdoor_lighting_ramp_main_entrance
+          - action: script.turn_on
+            target:
+              entity_id: script.outdoor_lighting_ramp_main_entrance
             data:
+              variables:
                 target_brightness: "{{ selected_target | int(0) }}"
                 ramp_seconds: "{{ ramp_to_use | int(0) }}"
 

packages/pet_feeding_and_jobs.yaml

@@ -1,8 +1,8 @@
 #:########################################################################################:#
 # Package: Pet Feeding and Jobs Timing
 # File:    pet_feeding_and_jobs.yaml
-# Version: v1.4.0
-# Date:    2026-07-26
+# Version: v1.5.2
+# Date:    2026-09-09
 #
 # Purpose:
 #   Provides legacy MQTT pet activity sensors and Jobs-derived timing sensors for
@@ -17,6 +17,11 @@
 #     instead of exposing a numeric sentinel value.
 #
 # Version History:
+#   - v1.5.2 (2026-09-12): Ignore stale restored dog-button event states so
+#     reconnects cannot create false timestamps or visual feedback.
+#   - v1.5.1 (2026-09-09): Extended dog-button feedback intervals to 500 ms.
+#   - v1.5.0 (2026-09-09): Added visual feedback flashes for physical dog
+#     completion buttons, using the Lounge outside light relay.
 #   - v1.4.0 (2026-07-26): Announce four physical job completions on the Sony
 #     lounge TV and both Pushover devices.
 #   - v1.3.0 (2026-07-26): Restore retained dog-fed and jobs-done activity
@@ -122,7 +127,12 @@ automation:
     conditions:
       - condition: template
         value_template: >-
-          {{ trigger.to_state.state not in ['unknown', 'unavailable'] }}
+          {% set valid_state = trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable'] %}
+          {% set event_ts = as_timestamp(trigger.to_state.state, 0)
+            if valid_state else 0 %}
+          {% set event_age = as_timestamp(now()) - event_ts %}
+          {{ valid_state and event_ts > 0 and event_age >= 0 and event_age <= 30 }}
     actions:
       - action: input_datetime.set_datetime
         target:
@@ -145,7 +155,12 @@ automation:
     conditions:
       - condition: template
         value_template: >-
-          {{ trigger.to_state.state not in ['unknown', 'unavailable'] }}
+          {% set valid_state = trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable'] %}
+          {% set event_ts = as_timestamp(trigger.to_state.state, 0)
+            if valid_state else 0 %}
+          {% set event_age = as_timestamp(now()) - event_ts %}
+          {{ valid_state and event_ts > 0 and event_age >= 0 and event_age <= 30 }}
     actions:
       - action: input_datetime.set_datetime
         target:
@@ -227,3 +242,64 @@ automation:
           title: "Jobs Announcement"
           short_announcement: "{{ completion_message }}"
           long_announcement: "{{ completion_message }}"
+
+  #:######################################################################################:#
+  # AUTOMATION: Physical Dog-Button Visual Feedback
+  #:######################################################################################:#
+  - id: dog_button_visual_feedback
+    alias: "Jobs - Dog Button Visual Feedback"
+    description: >-
+      Flashes the Lounge outside light relay for one physical single-press,
+      preserving its original state after dog feeding or depooping is recorded.
+    mode: queued
+    max: 10
+    triggers:
+      - trigger: state
+        entity_id:
+          - event.jobs_dog_fed_button_x14bt_action
+          - event.jobs_dog_depooped_button_x15bt_action
+    conditions:
+      - condition: template
+        value_template: >-
+          {% set valid_state = trigger.to_state is not none
+            and trigger.to_state.state not in ['unknown', 'unavailable'] %}
+          {% set event_ts = as_timestamp(trigger.to_state.state, 0)
+            if valid_state else 0 %}
+          {% set event_age = as_timestamp(now()) - event_ts %}
+          {{
+            valid_state
+            and event_ts > 0
+            and event_age >= 0
+            and event_age <= 30
+            and trigger.to_state.attributes.event_type == 'single'
+          }}
+    actions:
+      - variables:
+          initial_state: "{{ states('switch.esp_loungesouthleftswitch_relay_2_outside_light_1') }}"
+          flash_count: >-
+            {{ 2 if trigger.entity_id == 'event.jobs_dog_fed_button_x14bt_action' else 3 }}
+      - repeat:
+          count: "{{ flash_count | int }}"
+          sequence:
+            - choose:
+                - conditions:
+                    - condition: template
+                      value_template: "{{ initial_state == 'off' }}"
+                  sequence:
+                    - action: switch.turn_on
+                      target:
+                        entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                    - delay: "00:00:00.500"
+                    - action: switch.turn_off
+                      target:
+                        entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                    - delay: "00:00:00.500"
+              default:
+                - action: switch.turn_off
+                  target:
+                    entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                - delay: "00:00:00.500"
+                - action: switch.turn_on
+                  target:
+                    entity_id: switch.esp_loungesouthleftswitch_relay_2_outside_light_1
+                - delay: "00:00:00.500"

packages/quiet_time_on_off_actions.yaml

@@ -9,42 +9,24 @@
 #   quiet_time_on_off_actions.yaml
 #
 # VERSION:
-#   V1.2 2026-06-20
-#
-# VERSION HISTORY:
-#   V1.2 2026-06-20
-#     - Added Quiet Time OFF action to change OpenHASP panel openhasp_1
-#       back to page 1.
-#
-#   V1.1 2026-06-15
-#     - Added separate Quiet Time ON and Quiet Time OFF action sections.
-#     - Added support for non-binary Quiet Time OFF actions.
-#     - Sets input_number.openhasp_1_backlight_level to 200 when Quiet Time ends.
-#
-#   V1.0 2026-06-15
-#     - Initial standalone package split out from the main Quiet Time package.
-#     - Turns selected entities on/off when input_boolean.quiet_time changes.
+#   V1.3 2026-09-04
 #
 # PURPOSE:
 #   Runs local Home Assistant actions when Quiet Time is turned ON or OFF.
 #
-#   The main Quiet Time package should continue to own:
-#     - input_boolean.quiet_time
-#     - daily reset behaviour
-#     - MQTT quiet_time state publishing
+#   The main Quiet Time package owns the helper, daily reset behaviour, and MQTT
+#   publishing. This package owns extra local Quiet Time actions.
 #
-#   This package only handles extra local actions that should happen when
-#   Quiet Time starts or ends.
+# VERSION HISTORY:
+#   V1.3 2026-09-04
+#     - Disables Flounder Motion Wake during Quiet Time and requests a one-off
+#       10-second presence fade to Screen Off.
+#     - Restores Flounder Motion Wake when Quiet Time ends.
 #
-# EDITING NOTES:
-#   - Add normal on/off entities to the relevant entity lists.
-#   - Empty lists are fine and will simply do nothing.
-#   - Use the "Other Quiet Time OFF Actions" section for things that are not
-#     simple on/off actions, such as setting input_numbers, selects, scenes,
-#     scripts, MQTT commands, or custom service calls.
+#   V1.2 2026-06-20
+#     - Added Quiet Time OFF action to change OpenHASP panel openhasp_1 back to
+#       page 1.
 #
-################################################################################
-
 ################################################################################
 # AUTOMATIONS
 ################################################################################
@@ -56,56 +38,15 @@ automation:
     mode: single
 
     variables:
-      ##########################################################################
-      # QUIET TIME ON ACTION LISTS
-      ##########################################################################
-      #
-      # These actions run when input_boolean.quiet_time changes to "on".
-      #
-
       quiet_time_on_turn_off_entities:
         - light.led_matrix_display_led_matrix_display_display
-
       quiet_time_on_turn_on_entities: []
-
-      ##########################################################################
-      # QUIET TIME OFF ACTION LISTS
-      ##########################################################################
-      #
-      # These actions run when input_boolean.quiet_time changes to "off".
-      #
-
       quiet_time_off_turn_off_entities: []
-
       quiet_time_off_turn_on_entities:
         - light.led_matrix_display_led_matrix_display_display
-
-      ##########################################################################
-      # OTHER QUIET TIME OFF ACTION VALUES
-      ##########################################################################
-      #
-      # Use this list for input_number helpers that should be set when Quiet Time
-      # ends.
-      #
-      # Format:
-      #   - entity_id: input_number.some_helper
-      #     value: 123
-      #
-
       quiet_time_off_input_number_values:
         - entity_id: input_number.openhasp_1_backlight_level
           value: 200
-
-      ##########################################################################
-      # OPENHASP QUIET TIME OFF PAGE ACTION
-      ##########################################################################
-      #
-      # Sends the OpenHASP panel back to the main page when Quiet Time ends.
-      #
-      # Current OpenHASP MQTT command topic:
-      #   hasp/openhasp_1/command/page
-      #
-
       quiet_time_off_openhasp_page_topic: "hasp/openhasp_1/command/page"
       quiet_time_off_openhasp_page: 1
 
@@ -121,13 +62,6 @@ automation:
 
     actions:
       - choose:
-          ######################################################################
-          # QUIET TIME ON ACTIONS
-          ######################################################################
-          #
-          # Runs when Quiet Time starts.
-          #
-
           - conditions:
               - condition: template
                 value_template: "{{ trigger.to_state.state == 'on' }}"
@@ -138,47 +72,44 @@ automation:
                     - action: homeassistant.turn_off
                       target:
                         entity_id: "{{ repeat.item }}"
-
               - repeat:
                   for_each: "{{ quiet_time_on_turn_on_entities }}"
                   sequence:
                     - action: homeassistant.turn_on
                       target:
                         entity_id: "{{ repeat.item }}"
-
-          ######################################################################
-          # QUIET TIME OFF ACTIONS
-          ######################################################################
-          #
-          # Runs when Quiet Time ends.
-          #
-
+              # Stop camera motion from extending presence, then fade the
+              # current session to the existing Screen Off base state.
+              - action: switch.turn_off
+                target:
+                  entity_id: switch.flounder_kiosk_motion_wake
+              - wait_template: "{{ is_state('switch.flounder_kiosk_motion_wake', 'off') }}"
+                timeout: "00:00:10"
+                continue_on_timeout: true
+              - action: mqtt.publish
+                data:
+                  topic: "viewroad-commands/flounder/presence/end"
+                  payload: "10"
+                  retain: false
           - conditions:
               - condition: template
                 value_template: "{{ trigger.to_state.state == 'off' }}"
             sequence:
-              ##################################################################
-              # Quiet Time OFF - binary/entity actions
-              ##################################################################
-
               - repeat:
                   for_each: "{{ quiet_time_off_turn_off_entities }}"
                   sequence:
                     - action: homeassistant.turn_off
                       target:
                         entity_id: "{{ repeat.item }}"
-
               - repeat:
                   for_each: "{{ quiet_time_off_turn_on_entities }}"
                   sequence:
                     - action: homeassistant.turn_on
                       target:
                         entity_id: "{{ repeat.item }}"
-
-              ##################################################################
-              # Quiet Time OFF - input_number set actions
-              ##################################################################
-
+              - action: switch.turn_on
+                target:
+                  entity_id: switch.flounder_kiosk_motion_wake
               - repeat:
                   for_each: "{{ quiet_time_off_input_number_values }}"
                   sequence:
@@ -187,34 +118,8 @@ automation:
                         entity_id: "{{ repeat.item.entity_id }}"
                       data:
                         value: "{{ repeat.item.value | float }}"
-
-              ##################################################################
-              # Quiet Time OFF - OpenHASP page action
-              ##################################################################
-              #
-              # Change OpenHASP panel back to page 1 when Quiet Time ends.
-              #
-
               - action: mqtt.publish
                 data:
                   topic: "{{ quiet_time_off_openhasp_page_topic }}"
                   payload: "{{ quiet_time_off_openhasp_page | int }}"
                   retain: false
-
-              ##################################################################
-              # Quiet Time OFF - other custom actions
-              ##################################################################
-              #
-              # Add any extra non-binary service calls here later.
-              #
-              # Examples:
-              #
-              # - action: script.some_script
-              #
-              # - action: select.select_option
-              #   target:
-              #     entity_id: select.some_select
-              #   data:
-              #     option: "Some Option"
-              #
-              ##################################################################

packages/quiet_time_on_off_actions.yaml.bak

@@ -0,0 +1,245 @@
+################################################################################
+# Quiet Time On / Off Actions Package
+################################################################################
+#
+# TITLE:
+#   Quiet Time On / Off Actions
+#
+# FILE:
+#   quiet_time_on_off_actions.yaml
+#
+# VERSION:
+#   V1.3 2026-09-04
+#     - Disables Flounder Motion Wake during Quiet Time and requests a one-off
+#       10-second presence fade to Screen Off.
+#     - Restores Flounder Motion Wake when Quiet Time ends.
+#
+#   V1.2 2026-06-20
+#
+# VERSION HISTORY:
+#   V1.2 2026-06-20
+#     - Added Quiet Time OFF action to change OpenHASP panel openhasp_1
+#       back to page 1.
+#
+#   V1.1 2026-06-15
+#     - Added separate Quiet Time ON and Quiet Time OFF action sections.
+#     - Added support for non-binary Quiet Time OFF actions.
+#     - Sets input_number.openhasp_1_backlight_level to 200 when Quiet Time ends.
+#
+#   V1.0 2026-06-15
+#     - Initial standalone package split out from the main Quiet Time package.
+#     - Turns selected entities on/off when input_boolean.quiet_time changes.
+#
+# PURPOSE:
+#   Runs local Home Assistant actions when Quiet Time is turned ON or OFF.
+#
+#   The main Quiet Time package should continue to own:
+#     - input_boolean.quiet_time
+#     - daily reset behaviour
+#     - MQTT quiet_time state publishing
+#
+#   This package only handles extra local actions that should happen when
+#   Quiet Time starts or ends.
+#
+# EDITING NOTES:
+#   - Add normal on/off entities to the relevant entity lists.
+#   - Empty lists are fine and will simply do nothing.
+#   - Use the "Other Quiet Time OFF Actions" section for things that are not
+#     simple on/off actions, such as setting input_numbers, selects, scenes,
+#     scripts, MQTT commands, or custom service calls.
+#
+################################################################################
+
+################################################################################
+# AUTOMATIONS
+################################################################################
+
+automation:
+  - id: quiet_time_state_change_actions
+    alias: "Quiet Time - State Change Actions"
+    description: "Runs configured Home Assistant actions when Quiet Time is turned on or off."
+    mode: single
+
+    variables:
+      ##########################################################################
+      # QUIET TIME ON ACTION LISTS
+      ##########################################################################
+      #
+      # These actions run when input_boolean.quiet_time changes to "on".
+      #
+
+      quiet_time_on_turn_off_entities:
+        - light.led_matrix_display_led_matrix_display_display
+
+      quiet_time_on_turn_on_entities: []
+
+      ##########################################################################
+      # QUIET TIME OFF ACTION LISTS
+      ##########################################################################
+      #
+      # These actions run when input_boolean.quiet_time changes to "off".
+      #
+
+      quiet_time_off_turn_off_entities: []
+
+      quiet_time_off_turn_on_entities:
+        - light.led_matrix_display_led_matrix_display_display
+
+      ##########################################################################
+      # OTHER QUIET TIME OFF ACTION VALUES
+      ##########################################################################
+      #
+      # Use this list for input_number helpers that should be set when Quiet Time
+      # ends.
+      #
+      # Format:
+      #   - entity_id: input_number.some_helper
+      #     value: 123
+      #
+
+      quiet_time_off_input_number_values:
+        - entity_id: input_number.openhasp_1_backlight_level
+          value: 200
+
+      ##########################################################################
+      # OPENHASP QUIET TIME OFF PAGE ACTION
+      ##########################################################################
+      #
+      # Sends the OpenHASP panel back to the main page when Quiet Time ends.
+      #
+      # Current OpenHASP MQTT command topic:
+      #   hasp/openhasp_1/command/page
+      #
+
+      quiet_time_off_openhasp_page_topic: "hasp/openhasp_1/command/page"
+      quiet_time_off_openhasp_page: 1
+
+    triggers:
+      - trigger: state
+        entity_id: input_boolean.quiet_time
+        from:
+          - "on"
+          - "off"
+        to:
+          - "on"
+          - "off"
+
+    actions:
+      - choose:
+          ######################################################################
+          # QUIET TIME ON ACTIONS
+          ######################################################################
+          #
+          # Runs when Quiet Time starts.
+          #
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.to_state.state == 'on' }}"
+            sequence:
+              - repeat:
+                  for_each: "{{ quiet_time_on_turn_off_entities }}"
+                  sequence:
+                    - action: homeassistant.turn_off
+                      target:
+                        entity_id: "{{ repeat.item }}"
+
+               - repeat:
+                   for_each: "{{ quiet_time_on_turn_on_entities }}"
+                   sequence:
+                     - action: homeassistant.turn_on
+                       target:
+                         entity_id: "{{ repeat.item }}"
+
+               # Stop camera motion from extending presence, then fade the
+               # current session to the existing Screen Off base state.
+               - action: switch.turn_off
+                 target:
+                   entity_id: switch.flounder_kiosk_motion_wake
+
+               - wait_template: "{{ is_state('switch.flounder_kiosk_motion_wake', 'off') }}"
+                 timeout: "00:00:10"
+                 continue_on_timeout: true
+
+               - action: mqtt.publish
+                 data:
+                   topic: "viewroad-commands/flounder/presence/end"
+                   payload: "10"
+                   retain: false
+
+          ######################################################################
+          # QUIET TIME OFF ACTIONS
+          ######################################################################
+          #
+          # Runs when Quiet Time ends.
+          #
+
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.to_state.state == 'off' }}"
+            sequence:
+              ##################################################################
+              # Quiet Time OFF - binary/entity actions
+              ##################################################################
+
+              - repeat:
+                  for_each: "{{ quiet_time_off_turn_off_entities }}"
+                  sequence:
+                    - action: homeassistant.turn_off
+                      target:
+                        entity_id: "{{ repeat.item }}"
+
+               - repeat:
+                   for_each: "{{ quiet_time_off_turn_on_entities }}"
+                   sequence:
+                     - action: homeassistant.turn_on
+                       target:
+                         entity_id: "{{ repeat.item }}"
+
+               - action: switch.turn_on
+                 target:
+                   entity_id: switch.flounder_kiosk_motion_wake
+
+              ##################################################################
+              # Quiet Time OFF - input_number set actions
+              ##################################################################
+
+              - repeat:
+                  for_each: "{{ quiet_time_off_input_number_values }}"
+                  sequence:
+                    - action: input_number.set_value
+                      target:
+                        entity_id: "{{ repeat.item.entity_id }}"
+                      data:
+                        value: "{{ repeat.item.value | float }}"
+
+              ##################################################################
+              # Quiet Time OFF - OpenHASP page action
+              ##################################################################
+              #
+              # Change OpenHASP panel back to page 1 when Quiet Time ends.
+              #
+
+              - action: mqtt.publish
+                data:
+                  topic: "{{ quiet_time_off_openhasp_page_topic }}"
+                  payload: "{{ quiet_time_off_openhasp_page | int }}"
+                  retain: false
+
+              ##################################################################
+              # Quiet Time OFF - other custom actions
+              ##################################################################
+              #
+              # Add any extra non-binary service calls here later.
+              #
+              # Examples:
+              #
+              # - action: script.some_script
+              #
+              # - action: select.select_option
+              #   target:
+              #     entity_id: select.some_select
+              #   data:
+              #     option: "Some Option"
+              #
+              ##################################################################

packages/tplink_deco_guest_wifi.yaml

@@ -0,0 +1,101 @@
+#:########################################################################################:#
+# TP-Link Deco Guest Wi-Fi Package                                                        #
+#:########################################################################################:#
+#
+# TITLE:
+#   TP-Link Deco Guest Wi-Fi
+#
+# FILE:
+#   packages/tplink_deco_guest_wifi.yaml
+#
+# VERSION:
+#   V2.2 2026-08-24
+#
+# VERSION HISTORY:
+#   V2.2 2026-08-24
+#     - Replaced passive status sync with router-confirmed enforcement.
+#     - Repeats requests, reconciles at startup and hourly, and alerts when
+#       the Deco cannot confirm the requested state.
+#
+#   V2.1 2026-08-04
+#     - Added the original router-status sync automation.
+#
+#   V2.0 2026-08-04
+#     - Switched from Alexa voice commands to the Deco local API.
+#
+# PURPOSE:
+#   Enforces the requested TP-Link Deco guest Wi-Fi state and confirms it
+#   against the guest-network sensor reported by the router.
+#
+# DEPENDENCIES:
+#   - tplink_deco integration must be configured and connected to the Deco.
+#   - input_boolean.wifi_guest_network represents the requested guest-network
+#     state.
+#   - binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network reports
+#     the actual guest-network state from the router.
+#
+#:########################################################################################:#
+
+automation:
+  - id: enforce_wifi_guest_network_state
+    alias: "Enforce Wifi Guest Network State"
+    description: >
+      Reconciles requested guest Wi-Fi with the Deco's reported state, repeats
+      the request once after 30 seconds, and alerts on an unconfirmed mismatch.
+    mode: restart
+    triggers:
+      - trigger: state
+        entity_id: input_boolean.wifi_guest_network
+      - trigger: state
+        entity_id: binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network
+      - trigger: homeassistant
+        event: start
+      - trigger: time_pattern
+        hours: "*"
+        minutes: "0"
+    conditions:
+      - condition: template
+        value_template: >
+          {{ states('input_boolean.wifi_guest_network') in ['on', 'off']
+             and states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network')
+             in ['on', 'off']
+             and states('input_boolean.wifi_guest_network')
+             != states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') }}
+    actions:
+      - repeat:
+          count: 2
+          sequence:
+            - choose:
+                - conditions:
+                    - condition: state
+                      entity_id: input_boolean.wifi_guest_network
+                      state: "on"
+                  sequence:
+                    - action: tplink_deco.set_guest_network
+                      data:
+                        enable: true
+                - conditions:
+                    - condition: state
+                      entity_id: input_boolean.wifi_guest_network
+                      state: "off"
+                  sequence:
+                    - action: tplink_deco.set_guest_network
+                      data:
+                        enable: false
+            - wait_template: >
+                {{ states('input_boolean.wifi_guest_network')
+                   == states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') }}
+              timeout:
+                seconds: 30
+              continue_on_timeout: true
+      - condition: template
+        value_template: >
+          {{ states('input_boolean.wifi_guest_network')
+             != states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') }}
+      - action: persistent_notification.create
+        data:
+          notification_id: wifi_guest_network_state_mismatch
+          title: "Guest Wi-Fi state not confirmed"
+          message: >
+            The Deco still reports Guest Wi-Fi as {{ states('binary_sensor.data_cupboard_new_sundamage_12_deco_guest_network') }}
+            after two requests to set it {{ states('input_boolean.wifi_guest_network') }}.

packages/view_road_smoke_alarm_rf.yaml

@@ -0,0 +1,164 @@
+#:########################################################################################:#
+# View Road Smoke Alarm RF Package - V1.2.0                                                #
+#:########################################################################################:#
+# Receives normalized AJ-765 RF state from the decoder running on beaver.                  #
+#                                                                                          #
+# V1.2 performs early RF fingerprint classification, normally shortly after RF activity.   #
+#                                                                                          #
+# Current RF fingerprints:                                                                 #
+# - detector_test : TEST button transmission from a detector                               #
+# - remote_test   : TEST transmission matching the remote capture                          #
+# - remote_hush   : HUSH/LOCATE button on the Goldair remote                              #
+# - smoke_alarm   : Experimental only - not yet considered authoritative                   #
+#                                                                                          #
+# Individual detector identity has NOT been found in the RF protocol.                      #
+#:########################################################################################:#
+
+
+mqtt:
+
+  - binary_sensor:
+      name: "RF Interconnect"
+      unique_id: view_road_smoke_alarm_rf_interconnect
+      default_entity_id: binary_sensor.smoke_alarm_rf_interconnect
+
+      state_topic: "viewroad-status/smokealarms/rf/interconnect"
+      payload_on: "ON"
+      payload_off: "OFF"
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:radio-tower
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+        name: "Smoke Alarm RF Monitor"
+        manufacturer: "Zorruno"
+        model: "AJ-765 RF Monitor"
+        sw_version: "1.2.0"
+
+
+  - event:
+      name: "RF Event"
+      unique_id: view_road_smoke_alarm_rf_event
+      default_entity_id: event.smoke_alarm_rf_event
+
+      state_topic: "viewroad-status/smokealarms/rf/event"
+
+      event_types:
+        - interconnect_start
+        - detector_test
+        - remote_test
+        - remote_hush
+        - smoke_alarm
+        - unknown_aj765
+        - interconnect_end
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:radio-tower
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Current Type"
+      unique_id: view_road_smoke_alarm_rf_current_type
+      default_entity_id: sensor.smoke_alarm_rf_current_type
+
+      state_topic: "viewroad-status/smokealarms/rf/current_type"
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:waveform
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Type"
+      unique_id: view_road_smoke_alarm_rf_last_type
+      default_entity_id: sensor.smoke_alarm_rf_last_type
+
+      state_topic: "viewroad-status/smokealarms/rf/last_type"
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:waveform
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Confidence"
+      unique_id: view_road_smoke_alarm_rf_last_confidence
+      default_entity_id: sensor.smoke_alarm_rf_last_confidence
+
+      state_topic: "viewroad-status/smokealarms/rf/last_confidence"
+      unit_of_measurement: "%"
+      state_class: measurement
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      icon: mdi:percent
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Seen"
+      unique_id: view_road_smoke_alarm_rf_last_seen
+      default_entity_id: sensor.smoke_alarm_rf_last_seen
+
+      state_topic: "viewroad-status/smokealarms/rf/last_seen"
+      device_class: timestamp
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf
+
+
+  - sensor:
+      name: "RF Last Duration"
+      unique_id: view_road_smoke_alarm_rf_last_duration
+      default_entity_id: sensor.smoke_alarm_rf_last_duration
+
+      state_topic: "viewroad-status/smokealarms/rf/last_duration"
+      unit_of_measurement: "s"
+      device_class: duration
+      state_class: measurement
+      entity_category: diagnostic
+
+      availability_topic: "viewroad-status/smokealarms/rf/availability"
+      payload_available: "online"
+      payload_not_available: "offline"
+
+      device:
+        identifiers:
+          - view_road_smoke_alarm_rf

packages/xmas_tree_water_warning.yaml

@@ -21,12 +21,12 @@
 
 ############################################################################################
 # VARIABLES (YAML ANCHORS) - HA SAFE CONTAINER
-# - We store anchors under a valid customize dictionary.
-# - Customizing a non-existent entity is harmless.
+# - We store anchors under an existing helper customization so Spook does not
+#   flag an unknown entity.
 ############################################################################################
 homeassistant:
   customize:
-    sensor.xmas_tree_package_anchors:
+    input_boolean.enable_xmas_tree_warning_light:
       water_sensor_input: &water_sensor_input binary_sensor.xmas_tree_water_x32ld_water_leak
       warning_light_output: &warning_light_output switch.spare_tuya_smart_plug_zigbee_x31sp
 

packages/xmas_tree_water_warning.yaml.bak

@@ -0,0 +1,120 @@
+############################################################################################
+# PACKAGE: Xmas Tree Water Warning Light
+# FILE: xmas_tree_water_warning.yaml
+#
+# PURPOSE:
+# - Monitors a water sensor.
+# - If the sensor reads FALSE (off) AND the warning light is enabled:
+#   1) Blink immediately when the sensor first goes false
+#   2) Continue blinking every 5 minutes while it remains false
+#
+# DESIGN GUARANTEE:
+# - The warning light ALWAYS ends in the same state it was in
+#   before the automation started.
+#
+# IMPORTANT:
+# - Home Assistant templates cannot safely use YAML anchors inside states().
+# - If you change the entity ids below, update BOTH:
+#   - the anchors, and
+#   - the two template strings in conditions/action variables.
+############################################################################################
+
+############################################################################################
+# VARIABLES (YAML ANCHORS) - HA SAFE CONTAINER
+# - We store anchors under a valid customize dictionary.
+# - Customizing a non-existent entity is harmless.
+############################################################################################
+homeassistant:
+  customize:
+    sensor.xmas_tree_package_anchors:
+      water_sensor_input: &water_sensor_input binary_sensor.xmas_tree_water_x32ld_water_leak
+      warning_light_output: &warning_light_output switch.spare_tuya_smart_plug_zigbee_x31sp
+
+############################################################################################
+# ENABLE CONTROL
+############################################################################################
+input_boolean:
+  enable_xmas_tree_warning_light:
+    name: Enable Xmas Tree Warning Light
+    icon: mdi:alarm-light-outline
+
+############################################################################################
+# MIRRORED BINARY SENSOR (AS REQUESTED)
+############################################################################################
+template:
+  - binary_sensor:
+      - name: Enable Xmas Tree Warning Light
+        unique_id: enable_xmas_tree_warning_light_binary_sensor
+        icon: mdi:alarm-light-outline
+        state: "{{ is_state('input_boolean.enable_xmas_tree_warning_light', 'on') }}"
+
+############################################################################################
+# AUTOMATION: Flash warning light immediately and then every 5 minutes while sensor is FALSE
+############################################################################################
+automation:
+  - id: xmas_tree_water_warning_light_flash
+    alias: "Xmas Tree - Water Warning Light Flash"
+    description: >
+      If enabled and the water sensor reads false (off), blink immediately on transition
+      to false, and also every 5 minutes while it stays false.
+    mode: single
+    trigger:
+      # Immediate blink when the water sensor transitions to FALSE (off)
+      - platform: state
+        entity_id: *water_sensor_input
+        to: "off"
+
+      # Repeat reminder every 5 minutes while condition remains true
+      - platform: time_pattern
+        minutes: "/5"
+
+    condition:
+      # Only run if the warning feature is enabled
+      - condition: state
+        entity_id: input_boolean.enable_xmas_tree_warning_light
+        state: "on"
+
+      # Only run if water sensor is FALSE (off) and valid
+      - condition: template
+        value_template: "{{ states('binary_sensor.xmas_tree_water_x32ld_water_leak') == 'off' }}"
+
+      # Only run if warning light output is available
+      - condition: template
+        value_template: "{{ states('switch.spare_tuya_smart_plug_zigbee_x31sp') not in ['unknown','unavailable'] }}"
+
+    action:
+      # Capture original state so we can restore it at the end
+      - variables:
+          original_state: "{{ states('switch.spare_tuya_smart_plug_zigbee_x31sp') }}"
+
+      # Blink pattern:
+      # - Toggle for 1 second
+      # - Toggle back for 1 second
+      # - Repeat 5 times
+      - repeat:
+          count: 5
+          sequence:
+            - service: homeassistant.toggle
+              target:
+                entity_id: *warning_light_output
+            - delay:
+                seconds: 1
+            - service: homeassistant.toggle
+              target:
+                entity_id: *warning_light_output
+            - delay:
+                seconds: 1
+
+      # Restore the original state explicitly
+      - choose:
+          - conditions:
+              - condition: template
+                value_template: "{{ original_state == 'on' }}"
+            sequence:
+              - service: homeassistant.turn_on
+                target:
+                  entity_id: *warning_light_output
+        default:
+          - service: homeassistant.turn_off
+            target:
+              entity_id: *warning_light_output