#############################################
#############################################
# DOWNSTAIRS KITCHEN MAIN LIGHTSWITCH 
# V2.0 2025-06-05 YAML tidyups
# V1.0 2025-03-28 Initial Version
#############################################
# Zemismart KS-811 Triple push button
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#
# NOTES
# - 
#
#############################################
#############################################

#############################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#############################################
substitutions:
  # Device Naming
  device_name: "esp-downstkitchlights"
  friendly_name: "Downstairs Kitchen Lightswitch (3)"
  description_comment: "Downstairs Kitch Main Lightswitch using a Zemismart KS-811 Triple Push Button. Dining Light (1), Kitchen Light (2), Extract Fan (3)"
  device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  

  # Passwords
  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
  static_ip_address: !secret esp-downstkitchlights_ip

  # Device Settings
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc

  # Switch Naming
  switch_1_name: "Dining Light"
  switch_2_name: "Kitchen Light"
  switch_3_name: "Extract Fan" # This is virtual only, no power connected to 3rd relay 

##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"
  common_api: !include
    file: common/api_common.yaml
    vars:
      local_api_key: "${api_key}"
  #common_webportal: !include
  #  file: common/webportal_common.yaml
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"
  common_sntp: !include
    file: common/sntp_common.yaml
  common_general_sensors: !include
    file: common/sensors_common.yaml
    vars:
      local_friendly_name: "${friendly_name}"
      local_update_interval: "${update_interval}"

#############################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}
  comment: ${description_comment} # Appears on the esphome page in HA
  area: ${device_area}

#############################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#############################################
esp8266:
  board: esp01_1m

#############################################    
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
############################################# 
logger:
  level: ${log_level}  #INFO Level suggested, or DEBUG for testing
  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  #esp8266_store_log_strings_in_flash: false
  #tx_buffer_size: 64

#############################################
# STATUS LED
# https://esphome.io/components/status_led.html
#############################################
status_led:
  pin:
    number: GPIO2
    inverted: yes

#############################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#############################################
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO16
      mode: INPUT
      inverted: True
    name: "Button 1: ${switch_1_name}"
    on_press:
      - switch.toggle: Relay_1

  - platform: gpio
    pin:
      number: GPIO05
      mode: INPUT
      inverted: True
    name: "Button 2: ${switch_2_name}"
    on_press:
      - switch.toggle: Relay_2

  - platform: gpio
    pin:
      number: GPIO4
      mode: INPUT
      inverted: True
    name: "Button 3: ${switch_3_name}"
    on_press:
      - switch.toggle: Relay_3

#############################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#############################################
switch:
  - platform: gpio
    name: "Relay 1: ${switch_1_name}"
    pin: GPIO13
    id: Relay_1
  - platform: gpio
    name: "Relay 2: ${switch_2_name}"
    pin: GPIO12
    id: Relay_2
  - platform: gpio
    name: "Relay 3: ${switch_3_name}"
    pin: GPIO14
    id: Relay_3