#:########################################################################################:#
# TITLE: DOWNSTAIRS BEDROOM 2 LIGHTSWITCH
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstbedrm2lights.yaml
#:########################################################################################:#
# VERSIONS:
# V3.6 2026-02-25 Updated yaml to zorruno layout V1.1
# V3.5 2025-07-24 YAML tidyups
#:########################################################################################:#
# HARDWARE:
# Controlled by a Zemismart KS-811 Single push button
# pinout/schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#:########################################################################################:#
# OPERATION NOTES:
# - Single-button wall switch controlling a single relay output.
# - Button press toggles the relay state (Main Lights).
# - KS-811-1 button input is GPIO0 (note: boot-strap pin).
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
#    - The device will keep operating locally (button still toggles the relay).
#    - MQTT may still function (if used elsewhere), but HA entities will be unavailable until HA returns.
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
#    - The device remains controllable from Home Assistant via API.
#    - Local button control continues to work.
# c) Entire WiFi/Network OFFLINE
#    - The device continues to operate locally (button toggles relay).
#    - SNTP is not needed (no timeclocks used).
#:########################################################################################:#

#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
  # Device Naming
  device_name: "esp-downstbedrm2lights"
  friendly_name: "Downstairs Bedroom 2 Lightswitch (1)"
  description_comment: "Downstairs Bedroom 2 Main Lightswitch using a Zemismart KS-811 Single Push Button. Main Lights (1) (Layout V1.1)"
  device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.

  # Project Naming
  project_name: "Zemismart Technologies.KS-811 Single" # Project Details
  project_version: "v3.6"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version

  # Passwords & Secrets
  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
  static_ip_address: !secret esp-downstbedrm2lights_ip

  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
  # Don't forget to switch it back when changed.
  current_ip_address: ${static_ip_address}

  # Device Settings
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc

  # Switch/Relay/Button Naming & Icons
  #relay_icon: "mdi:lightbulb-group"
  switch_1_name: "Main Lights"

#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"
      local_current_ip_address: "${current_ip_address}"

  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
  common_api: !include
    file: common/api_common.yaml
    #file: common/api_common_noencryption.yaml
    vars:
      local_api_key: "${api_key}"

  #### MQTT ####
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"

  #### WEB PORTAL ####
  #common_webportal: !include common/webportal_common.yaml

  #### SNTP (Only use if you want/need accurate timeclocks) ####
  common_sntp: !include common/sntp_common.yaml

  #### DIAGNOSTICS Sensors ####
  diag_basic: !include common/include_basic_diag_sensors.yaml
  diag_more: !include common/include_more_diag_sensors.yaml
  diag_debug: !include common/include_debug_diag_sensors.yaml
  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml

#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
  name: "${device_name}"
  friendly_name: "${friendly_name}"
  comment: "${description_comment}" # Appears on the esphome page in HA
  area: "${device_area}"
  project:
    name: "${project_name}"
    version: "${project_version}"

#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266/
#:########################################################################################:#
esp8266:
  board: esp01_1m
  early_pin_init: false # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
  board_flash_mode: dout # Default is dout

#:########################################################################################:#
# LOGGING: ESPHome Logging Enable
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
  level: "${log_level}"  # INFO Level suggested, or DEBUG for testing
  #baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things

#:########################################################################################:#
# STATUS LED:
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
  pin:
    number: GPIO2
    inverted: true

#:########################################################################################:#
# BINARY SENSORS:
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
  # GPIO16 for KS-811 first button UNLESS it is a single button KS-811 in which case it is GPIO00
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT
      inverted: true
    name: "Button 1: ${switch_1_name}"
    on_press:
      - switch.toggle: relay_1

#:########################################################################################:#
# SWITCH COMPONENT:
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
  # GPIO13 for KS-811 first relay UNLESS it is KS-811-1 then it is GPIO12
  - platform: gpio
    name: "Relay 1: ${switch_1_name}"
    pin: GPIO12
    id: relay_1