#:########################################################################################:# # TITLE: DOWNSTAIRS BATHROOM MAIN LIGHTSWITCH # zorruno.com layout v1.1 2026 #:########################################################################################:# # REPO: # https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-downstbathswitch.yaml #:########################################################################################:# # VERSIONS: # V2.0 2025-06-05 YAML Tidyups # V1.0 2025-02-14 Initial Version #:########################################################################################:# # HARDWARE: # Zemismart KS-811 Triple push button (KS-811-3) # pinout/schematic: https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/ #:########################################################################################:# # OPERATION NOTES: # - Triple wall switch for Downstairs Bathroom # - Button 1 toggles Relay 1 (Main Lights) # - Button 2 toggles Relay 2 (Cabinet Light) # - Button 3 controls Relay 3 (Extract Fan) using multi-click timing: # - Single click: toggle, or run for 5 minutes then off # - Double click: run for 30 minutes then off # - Triple click: run for 4 hours then off # - Hold (2s+): toggle permanently #:########################################################################################:# # OFFLINE NOTES: # a) Home Assistant OFFLINE, but Network and MQTT ONLINE # - Switch continues operating locally (buttons drive relays) # - If MQTT is used elsewhere in your system, this device itself does not require it for basic operation # b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE) # - Switch continues operating locally (buttons drive relays) # - HA can still control/read the relays via API # c) Entire WiFi/Network OFFLINE # - Switch continues operating locally (buttons drive relays) # - Timeclocks will drift without network (SNTP). Time of day can be reset by powering off then on again at 12pm (midday) #:########################################################################################:# #:########################################################################################:# # SUBSTITUTIONS: Specific device variable substitutions # If NOT using a secrets file, just replace these with the passwords etc (in quotes) #:########################################################################################:# substitutions: # Device Naming device_name: "esp-downstbathswitch" friendly_name: "Downstairs Bath Lightswitch (3)" description_comment: "Downstairs Bathroom Main Lightswitch using a Zemismart KS-811 Triple Push Button. Main Light (1), Cabinet Light (2), Extract Fan (3) (Layout V1.1)" device_area: "Downstairs Flat" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. # Project Naming project_name: "Zemismart Technologies.KS-811 Triple" # Project Details project_version: "v2.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version # Passwords (unfortunately you cannot use substitutions inside secrets names) api_key: !secret esp-downstbathswitch_api_key ota_pass: !secret esp-downstbathswitch_ota_pass static_ip_address: !secret esp-downstbathswitch_ip # If we are changing IP addresses, you must update the current IP address here, otherwise it remains # Don't forget to switch it back when changed. current_ip_address: ${static_ip_address} # Device Settings log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE update_interval: "60s" # update time for general sensors etc # Switch Naming switch_1_name: "Main Lights" switch_2_name: "Cabinet Light" switch_3_name: "Extract Fan" # This is virtual only, no power connected to 3rd relay #:########################################################################################:# # PACKAGES: Included Common Packages # https://esphome.io/components/packages.html #:########################################################################################:# packages: #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode #### common_wifi: !include file: common/network_common.yaml vars: local_device_name: "${device_name}" local_static_ip_address: "${static_ip_address}" local_ota_pass: "${ota_pass}" local_current_ip_address: "${current_ip_address}" #### HOME ASSISTANT API (choose encryption or no encryption options) #### common_api: !include file: common/api_common.yaml #file: common/api_common_noencryption.yaml vars: local_api_key: "${api_key}" #### MQTT #### common_mqtt: !include file: common/mqtt_common.yaml vars: local_device_name: "${device_name}" #### WEB PORTAL #### #common_webportal: !include common/webportal_common.yaml #### SNTP (Only use if you want/need accurate timeclocks) #### common_sntp: !include common/sntp_common.yaml #### DIAGNOSTICS Sensors #### diag_basic: !include common/include_basic_diag_sensors.yaml diag_more: !include common/include_more_diag_sensors.yaml diag_debug: !include common/include_debug_diag_sensors.yaml #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml #:########################################################################################:# # ESPHOME: # https://esphome.io/components/esphome.html #:########################################################################################:# esphome: name: "${device_name}" friendly_name: "${friendly_name}" comment: "${description_comment}" # Appears on the esphome page in HA area: "${device_area}" project: name: "${project_name}" version: "${project_version}" #:########################################################################################:# # ESP PLATFORM AND FRAMEWORK: # https://esphome.io/components/esp8266/ # https://esphome.io/components/esp32/ #:########################################################################################:# esp8266: board: esp01_1m #:########################################################################################:# # LOGGING: ESPHome Logging Enable # https://esphome.io/components/logger.html #:########################################################################################:# logger: level: "${log_level}" #baud_rate: 0 # set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM) #esp8266_store_log_strings_in_flash: false #tx_buffer_size: 64 #:########################################################################################:# # STATUS LED: # https://esphome.io/components/status_led.html #:########################################################################################:# status_led: pin: number: GPIO2 inverted: true #:########################################################################################:# # BINARY SENSORS: # https://esphome.io/components/binary_sensor/ #:########################################################################################:# binary_sensor: - platform: gpio pin: number: GPIO16 mode: INPUT inverted: true use_interrupt: false # GPIO16 does not support interrupts so use polling (suppresses warning). name: "Button 1: ${switch_1_name}" on_press: - switch.toggle: Relay_1 - platform: gpio pin: number: GPIO05 mode: INPUT inverted: true name: "Button 2: ${switch_2_name}" on_press: - switch.toggle: Relay_2 - platform: gpio pin: number: GPIO4 mode: INPUT inverted: true name: "Button 3: ${switch_3_name}" on_multi_click: # Single click: 1 press -> relay on for 5 minutes - timing: - ON for at most 0.5s - OFF for at least 0.5s then: - if: condition: lambda: 'return id(Relay_3).state;' then: - switch.turn_off: Relay_3 else: - switch.turn_on: Relay_3 - delay: 5min - switch.turn_off: Relay_3 # Double click: 2 presses -> relay on for 30 minutes - timing: - ON for at most 0.5s - OFF for at most 0.5s - ON for at most 0.5s - OFF for at least 0.5s then: - if: condition: lambda: 'return id(Relay_3).state;' then: - switch.turn_off: Relay_3 else: - switch.turn_on: Relay_3 - delay: 30min - switch.turn_off: Relay_3 # Triple click: 3 presses -> relay on for 4 hours - timing: - ON for at most 0.5s - OFF for at most 0.5s - ON for at most 0.5s - OFF for at most 0.5s - ON for at most 0.5s - OFF for at least 0.2s then: - if: condition: lambda: 'return id(Relay_3).state;' then: - switch.turn_off: Relay_3 else: - switch.turn_on: Relay_3 - delay: 4h - switch.turn_off: Relay_3 # Hold: pressed for 2 seconds or more -> relay toggles permanently - timing: - ON for at least 2s then: - if: condition: lambda: 'return id(Relay_3).state;' then: - switch.turn_off: Relay_3 else: - switch.turn_on: Relay_3 #:########################################################################################:# # SWITCH COMPONENT: # https://esphome.io/components/switch/ #:########################################################################################:# switch: - platform: gpio name: "Relay 1: ${switch_1_name}" pin: GPIO13 id: Relay_1 - platform: gpio name: "Relay 2: ${switch_2_name}" pin: GPIO12 id: Relay_2 - platform: gpio name: "Relay 3: ${switch_3_name}" pin: GPIO14 id: Relay_3