#:########################################################################################:#
# TITLE: OFFICE DUAL LIGHT CONTROL
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-officeduallights.yaml
#:########################################################################################:#
# VERSIONS:
# V2.7 2026-04-24 Updated MQTT local topics, retain false, and timed control using seconds
# V2.6 2026-04-23 Added independent MQTT timed ON control for relay1 and relay2
# V2.5 2026-03-11 Updated yaml to zorruno layout V1.1
# V2.4 2025-06-30 Tidied up MQTT direct relay control (esps can control each other via MQTT)
# V2.3 2025-06-18 Added MQTT direct relay control
#:########################################################################################:#
# HARDWARE:
# - Sonoff Dual R1
# - ESP8266 based
# - 2 x relay outputs
# - 2 x local push buttons
# - Relay control via UART serial commands
# - Status LED on GPIO13
#:########################################################################################:#
# OPERATION NOTES:
# - Controls 2 office light circuits:
#   - Overhead cool white lights
#   - Right hand warm bunker light
# - Local button 1 toggles relay/light 1 and cancels any active timer for relay 1
# - Local button 2 toggles relay/light 2 and cancels any active timer for relay 2
# - Relay state changes are sent out via MQTT status topics with retain false
# - MQTT can command each relay with:
#   - On  = turn on with no timer and cancel any active timer
#   - Off = turn off immediately and cancel any active timer
#   - 1 to 3600 = turn on for that many seconds, then turn off
# - If a new valid timed value is received while a timer is already active, the timer restarts from zero
# - Invalid MQTT timer values are ignored
# - Template binary lights drive the template relay switches
# - Sonoff Dual R1 requires UART serial packets to operate the physical relays
#
# MQTT COMMANDS:
# - Command relay 1:
#   - ${mqtt_local_command1_topic}   On, Off, or 1 to 3600 seconds
# - Command relay 2:
#   - ${mqtt_local_command2_topic}   On, Off, or 1 to 3600 seconds
# - Relay 1 status publishes to:
#   - ${mqtt_local_status1_topic}    On or Off
# - Relay 2 status publishes to:
#   - ${mqtt_local_status2_topic}    On or Off
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant offline (network and MQTT still online):
#    - Device continues to operate from local buttons
#    - Device can still be controlled directly by MQTT
#    - Relay status still publishes by MQTT if broker is available
#
# b) MQTT offline (or HA and MQTT both offline):
#    - Device continues to operate from local buttons only
#    - No direct inter-ESP MQTT control available
#    - No MQTT state feedback available
#
# c) Entire WiFi / Network offline:
#    - Device continues to operate from local buttons only
#    - No HA control or MQTT control/status available
#    - Accurate time is not needed; SNTP is not required for operation
#:########################################################################################:#

#:########################################################################################:#
# SUBSTITUTIONS:
# Specific device variable substitutions
#:########################################################################################:#
substitutions:
  # Device Naming
  device_name: "esp-officeduallights"
  friendly_name: "Office Dual Lights"
  description_comment: "Dual Office Lights (Overhead and right hand Bunker) :: Sonoff Dual R1 (Layout V1.1)"
  device_area: "Office"

  # Project Naming
  project_name: "Sonoff Technologies.Sonoff Dual R1"
  project_version: "v2.7"

  # Passwords and Secrets
  api_key: !secret esp-api_key
  ota_pass: !secret esp-ota_pass
  static_ip_address: !secret esp-officeduallights_ip
  current_ip_address: ${static_ip_address}
  mqtt_command_main_topic: !secret mqtt_command_main_topic
  mqtt_status_main_topic: !secret mqtt_status_main_topic

  # Device Settings
  relay_icon: "mdi:lightbulb-group"
  log_level: "NONE"
  update_interval: "60s"

  # MQTT LOCAL Controls
  mqtt_local_device1_name: "office-dual-lights-right"
  mqtt_local_command1_topic: "${mqtt_command_main_topic}/${mqtt_local_device1_name}"
  mqtt_local_status1_topic: "${mqtt_status_main_topic}/${mqtt_local_device1_name}"

  mqtt_local_device2_name: "office-dual-lights-left"
  mqtt_local_command2_topic: "${mqtt_command_main_topic}/${mqtt_local_device2_name}"
  mqtt_local_status2_topic: "${mqtt_status_main_topic}/${mqtt_local_device2_name}"

  # MQTT REMOTE Controls
  # mqtt_remote_device1_name: "masterbath-towelrail"
  # mqtt_remote_device1_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device1_name}/operation"
  # mqtt_remote_device1_command1: "BOOST"

  # Switch Naming
  switch_1_name: "Dual L1 Relay"
  relay_1_icon: "mdi:lightbulb"
  light_1_name: "Light 1 (Right Hand Bunker Light)"

  switch_2_name: "Dual L2 Relay"
  relay_2_icon: "mdi:lightbulb"
  light_2_name: "Light 2 (Cool White Overhead Lights)"

#:########################################################################################:#
# PACKAGES:
# Included common packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_current_ip_address: "${current_ip_address}"
      local_ota_pass: "${ota_pass}"

  common_api: !include
    file: common/api_common.yaml
    # file: common/api_common_noencryption.yaml
    vars:
      local_api_key: "${api_key}"

  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"

  # common_webportal: !include common/webportal_common.yaml
  # common_sntp: !include common/sntp_common.yaml

  diag_basic: !include common/include_basic_diag_sensors.yaml
  diag_more: !include common/include_more_diag_sensors.yaml
  # diag_debug: !include common/include_debug_diag_sensors.yaml
  # diag_resetcount: !include common/include_resetcount_diag_sensors.yaml

#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
  name: "${device_name}"
  friendly_name: "${friendly_name}"
  comment: "${description_comment}"
  area: "${device_area}"

#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp8266.html
#:########################################################################################:#
esp8266:
  board: esp01_1m
  restore_from_flash: false

preferences:
  flash_write_interval: 5min

mdns:
  disabled: true

#:########################################################################################:#
# LOGGER:
# Sonoff Dual cannot use UART logging because UART is required for relay control
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
  level: "${log_level}"
  baud_rate: 0

#:########################################################################################:#
# UART BUS:
# https://esphome.io/components/uart.html
#:########################################################################################:#
uart:
  tx_pin: GPIO01
  rx_pin: GPIO03
  baud_rate: 19200

#:########################################################################################:#
# MQTT COMPONENT:
# Device-specific MQTT command triggers
# https://esphome.io/components/mqtt.html
#:########################################################################################:#
mqtt:
  on_message:
    - topic: "${mqtt_local_command1_topic}"
      payload: "On"
      then:
        - script.stop: relay_1_timer_script
        - light.turn_on: light_1

    - topic: "${mqtt_local_command1_topic}"
      payload: "Off"
      then:
        - script.stop: relay_1_timer_script
        - light.turn_off: light_1

    - topic: "${mqtt_local_command1_topic}"
      then:
        - lambda: |-
            if (x.empty()) {
              return;
            }

            bool numeric_payload = true;
            for (char c : x) {
              if (c < '0' || c > '9') {
                numeric_payload = false;
                break;
              }
            }

            if (!numeric_payload) {
              return;
            }

            const int timer_seconds = atoi(x.c_str());
            if (timer_seconds < 1 || timer_seconds > 3600) {
              return;
            }

            id(relay_1_timer_script)->execute(timer_seconds * 1000);

    - topic: "${mqtt_local_command2_topic}"
      payload: "On"
      then:
        - script.stop: relay_2_timer_script
        - light.turn_on: light_2

    - topic: "${mqtt_local_command2_topic}"
      payload: "Off"
      then:
        - script.stop: relay_2_timer_script
        - light.turn_off: light_2

    - topic: "${mqtt_local_command2_topic}"
      then:
        - lambda: |-
            if (x.empty()) {
              return;
            }

            bool numeric_payload = true;
            for (char c : x) {
              if (c < '0' || c > '9') {
                numeric_payload = false;
                break;
              }
            }

            if (!numeric_payload) {
              return;
            }

            const int timer_seconds = atoi(x.c_str());
            if (timer_seconds < 1 || timer_seconds > 3600) {
              return;
            }

            id(relay_2_timer_script)->execute(timer_seconds * 1000);

#:########################################################################################:#
# SCRIPT COMPONENT:
# Independent per-relay timer scripts
# mode: restart means a new valid timer value restarts the timer from zero
# https://esphome.io/components/script.html
#:########################################################################################:#
script:
  - id: relay_1_timer_script
    mode: restart
    parameters:
      timer_duration_ms: int
    then:
      - light.turn_on: light_1
      - delay: !lambda "return timer_duration_ms;"
      - light.turn_off: light_1

  - id: relay_2_timer_script
    mode: restart
    parameters:
      timer_duration_ms: int
    then:
      - light.turn_on: light_2
      - delay: !lambda "return timer_duration_ms;"
      - light.turn_off: light_2

#:########################################################################################:#
# STATUS LED COMPONENT:
# Sonoff Dual LED is on GPIO13
# https://esphome.io/components/status_led.html
#:########################################################################################:#
status_led:
  pin:
    number: GPIO13
    inverted: true

#:########################################################################################:#
# BINARY SENSOR COMPONENT:
# Sonoff Dual R1 buttons are GPIO04 and GPIO14
# Local button presses cancel any active timer for that relay before toggling
# https://esphome.io/components/binary_sensor/
#:########################################################################################:#
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO4
      mode: INPUT_PULLUP
      inverted: true
    id: button_1
    on_press:
      - script.stop: relay_1_timer_script
      - light.toggle: light_1

  - platform: gpio
    pin:
      number: GPIO14
      mode: INPUT_PULLUP
      inverted: true
    id: button_2
    on_press:
      - script.stop: relay_2_timer_script
      - light.toggle: light_2

#:########################################################################################:#
# SWITCH COMPONENT:
# Sonoff Dual R1 requires serial data packets to switch the relays
# Relay state changes publish MQTT status updates with retain false
# https://esphome.io/components/switch/
#:########################################################################################:#
switch:
  - platform: template
    name: "${switch_1_name}"
    id: relay_1
    optimistic: true
    icon: "${relay_1_icon}"
    internal: true
    turn_on_action:
      - mqtt.publish:
          topic: "${mqtt_local_status1_topic}"
          payload: "On"
          retain: false
      - if:
          condition:
            switch.is_off: relay_2
          then:
            - uart.write: [0xA0, 0x04, 0x01, 0xA1]
          else:
            - uart.write: [0xA0, 0x04, 0x03, 0xA1]
    turn_off_action:
      - mqtt.publish:
          topic: "${mqtt_local_status1_topic}"
          payload: "Off"
          retain: false
      - if:
          condition:
            switch.is_off: relay_2
          then:
            - uart.write: [0xA0, 0x04, 0x00, 0xA1]
          else:
            - uart.write: [0xA0, 0x04, 0x02, 0xA1]

  - platform: template
    name: "${switch_2_name}"
    id: relay_2
    optimistic: true
    icon: "${relay_2_icon}"
    internal: true
    turn_on_action:
      - mqtt.publish:
          topic: "${mqtt_local_status2_topic}"
          payload: "On"
          retain: false
      - if:
          condition:
            switch.is_off: relay_1
          then:
            - uart.write: [0xA0, 0x04, 0x02, 0xA1]
          else:
            - uart.write: [0xA0, 0x04, 0x03, 0xA1]
    turn_off_action:
      - mqtt.publish:
          topic: "${mqtt_local_status2_topic}"
          payload: "Off"
          retain: false
      - if:
          condition:
            switch.is_off: relay_1
          then:
            - uart.write: [0xA0, 0x04, 0x00, 0xA1]
          else:
            - uart.write: [0xA0, 0x04, 0x01, 0xA1]

#:########################################################################################:#
# OUTPUT COMPONENT:
# Template outputs drive the relay template switches when the light state changes
# https://esphome.io/components/output/
#:########################################################################################:#
output:
  - platform: template
    id: light_output_1
    type: binary
    write_action:
      - lambda: |-
          if (state) {
            id(relay_1).turn_on();
          } else {
            id(relay_1).turn_off();
          }

  - platform: template
    id: light_output_2
    type: binary
    write_action:
      - lambda: |-
          if (state) {
            id(relay_2).turn_on();
          } else {
            id(relay_2).turn_off();
          }

#:########################################################################################:#
# LIGHT COMPONENT:
# Main control entities for both local and MQTT control paths
# https://esphome.io/components/light/
#:########################################################################################:#
light:
  - platform: binary
    name: "${light_1_name}"
    id: light_1
    output: light_output_1

  - platform: binary
    name: "${light_2_name}"
    id: light_2
    output: light_output_2