substitutions:
  ##############################################
  # SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
  # If NOT using a secrets file, just replace these with the passwords etc (in quotes)
  #############################################
  wifi_ssid: !secret ha_wifi_ssid
  wifi_password: !secret ha_wifi_password
  fallback_ap_password: !secret fallback_ap_password

  # Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
  wifi_fast_connect: "false"

  # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
  dns_domain: ".local"

  # Automatically add the mac address to the name
  # eg so you can use a single firmware for all devices
  add_mac_suffix: "false"

  # Enable or disable the use of IPv6 networking on the device
  ipv6_enable: "false"
  
  # Add these if we are giving it a static ip, or remove them in the Wifi section
  static_ip_subnet: !secret ha_wifi_subnet
  static_ip_gateway: !secret ha_wifi_gateway
  static_ip_dns1: !secret ha_wifi_gateway

#############################################
# Common Wifi Settings
# https://esphome.io/components/wifi.html
#
# Power Save mode (can reduce wifi reliability)
# NONE (least power saving, Default for ESP8266)
# LIGHT (Default for ESP32)
# HIGH (most power saving)
#############################################
wifi:
  ssid: ${wifi_ssid}
  password: ${wifi_password}
  #enable_rrm: true           # (ESP32 only) enable 802.11k Radio Resource Management
  #enable_btm: true           # (ESP32 only) enable 802.11v BSS Transition Management
  #power_save_mode: LIGHT   # https://esphome.io/components/wifi.html#wifi-power-save-mode
  manual_ip: # optional static IP address
    static_ip: ${local_static_ip_address}
    gateway: ${static_ip_gateway}
    subnet: ${static_ip_subnet}
    dns1: ${static_ip_dns1}
  ap: # Details for fallback hotspot in case wifi connection fails https://esphome.io/components/wifi.html#access-point-mode
    ssid: ${device_name} AP
    password: ${fallback_ap_password}
    ap_timeout: 10min # Time until it brings up fallback AP. default is 1min
  # Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
  fast_connect: "${wifi_fast_connect}"
  # Define dns domain / suffix to add to hostname
  domain: "${dns_domain}"

captive_portal: # extra fallback mechanism for when connecting if the configured WiFi fails

#############################################
# Enable Over the Air Update Capability
# https://esphome.io/components/ota.html?highlight=ota
#############################################
ota:
  - platform: esphome
    password: ${local_ota_pass}
    version: 2

#############################################
# Safe Mode
# Safe mode will detect boot loops
# https://esphome.io/components/safe_mode
#############################################
safe_mode:

#############################################
# Network
# global configuration for all types of networks
# https://esphome.io/components/network.html
#############################################
network:
  enable_ipv6: ${ipv6_enable}