#############################################
#############################################
# ESP32 - Garage
# Bluetooth Proxy
#############################################
#############################################

#############################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#############################################
substitutions:
  # Device Naming
  device_name: "esp-garagebtproxy"
  friendly_name: "Garage Entrance Bluetooth Proxy"
  description_comment: "ESP32-WROOM garage entrance with BT Proxy"
  device_area: "Garage" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. 
  
  # Project Naming
  project_name: "Zemismart Technologies.KS-811-3 (Triple)" # Project Details 
  project_version: "v1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
  
  #entity_prefix: "Main Bathroom" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current. 

  # Passwords
  api_key: !secret esp-api_key #unfortunately you can't use substitutions in secrets names
  ota_pass: !secret esp-ota_pass #unfortunately you can't use substitutions in secrets names
  static_ip_address: !secret esp-garagebtproxy_ip
  #mqtt_local_command_main_topic: !secret mqtt_local_command_main_topic
  #mqtt_local_status_main_topic: !secret mqtt_local_status_main_topic
  
  # Device Settings
  #relay_icon: "mdi:heating-coil"
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc

  #############################################
  # SPECIFIC PROJECT VARIABLE SUBSTITUTIONS
  #############################################
  #
  #

##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"

  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
  common_api: !include
    file: common/api_common.yaml
    #file: common/api_common_noencryption.yaml
    vars:
      local_api_key: "${api_key}"

  #### MQTT ####
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"
  
  #### WEB PORTAL ####
  #common_webportal: !include common/webportal_common.yaml
  #### SNTP (Only use if you want/need accurate timeclocks) ####
  common_sntp:      !include common/sntp_common.yaml

  #### DIAGNOSTICS Sensors ####
  diag_basic:       !include common/include_basic_diag_sensors.yaml
  diag_more:        !include common/include_more_diag_sensors.yaml
  #diag_debug:       !include common/include_debug_diag_sensors.yaml
  #diag_resetcount:  !include common/include_resetcount_diag_sensors.yaml
  
#############################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}
  comment: ${description_comment} #appears on the esphome page in HA
  min_version: 2024.6.0  #
  area: ${device_area}

#############################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#############################################
esp32:
  board: esp32dev
  framework:
    #type: arduino
    type: esp-idf  #Suggested Use ESP-IDF Framework, or Plug Out the UART Cable Might Cause ESP32 Hang. 
    version: recommended #recommended, latest or dev
    advanced:
      minimum_chip_revision: "3.1" # This makes the binary slightly smaller

#############################################    
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
############################################# 
logger:
  level: ${log_level}  #INFO Level suggested, or DEBUG for testing
  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  #esp8266_store_log_strings_in_flash: false
  #tx_buffer_size: 64

#############################################    
# Bluetooth
# https://esphome.io/components/bluetooth_proxy.html
# https://esphome.io/components/esp32_ble_tracker.html
# Remember that this takes a LOT of processing. On the 
# ESP32, enable the  IDF framework, and disable the 
# Web server component.  Changing to the IDF framework 
# needs to be via cable not OTA to change the
# partition setup.
#############################################  
bluetooth_proxy:
  active: true

esp32_ble_tracker:
  scan_parameters:
    # We currently use the defaults to ensure Bluetooth
    # can co-exist with WiFi In the future we may be able to
    # enable the built-in coexistence logic in ESP-IDF
    active: true