########################################################################################## ########################################################################################## # LOUNGE SOUTH LEFT LIGHTSWITCH # V4.0 2025-10-04 Copied from other device ########################################################################################## # Zemismart KS-811 Double push button # pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/ # # NOTES # - ########################################################################################## ########################################################################################## ########################################################################################## # SPECIFIC DEVICE VARIABLE SUBSTITUTIONS # If NOT using a secrets file, just replace these with the passwords etc (in quotes) ########################################################################################## substitutions: # Device Naming device_name: "esp-loungesouthleftswitch" friendly_name: "Lounge South Left Lightswitch (2)" description_comment: "Lounge South Left Lightswitch using a Zemismart KS-811 Double Push Button. Wall Washer Left (1), Outside Light 1 (2)" device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. # Project Naming project_name: "Zemismart Technologies.KS-811 Double" # Project Details project_version: "v4.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version # Passwords & Secrets api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names static_ip_address: !secret esp-loungesouthleftswitch_ip mqtt_command_main_topic: !secret mqtt_command_main_topic mqtt_status_main_topic: !secret mqtt_status_main_topic # Device Settings #relay_icon: "mdi:lightbulb-group" log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE update_interval: "60s" # update time for for general sensors etc # MQTT REMOTE Controls mqtt_remote_device_name: "garage-corridor-lights" mqtt_remote_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}" mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}" mqtt_remote_device_command_ON: "ON" mqtt_remote_device_command_OFF: "OFF" # Switch Naming switch_1_name: "Wall Washer Left" switch_2_name: "Outside Light 1" #switch_3_name: "Nil" ######################################################################################### # PACKAGES: Included Common Packages # https://esphome.io/components/packages.html ########################################################################################## packages: #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode #### common_wifi: !include file: common/network_common.yaml vars: local_device_name: "${device_name}" local_static_ip_address: "${static_ip_address}" local_ota_pass: "${ota_pass}" #### HOME ASSISTANT API (choose encryption or no encryption options) #### common_api: !include file: common/api_common.yaml #file: common/api_common_noencryption.yaml vars: local_api_key: "${api_key}" #### MQTT #### common_mqtt: !include file: common/mqtt_common.yaml vars: local_device_name: "${device_name}" #### WEB PORTAL #### #common_webportal: !include common/webportal_common.yaml #### SNTP (Only use if you want/need accurate timeclocks) #### #common_sntp: !include common/sntp_common.yaml #### DIAGNOSTICS Sensors #### diag_basic: !include common/include_basic_diag_sensors.yaml diag_more: !include common/include_more_diag_sensors.yaml #diag_debug: !include common/include_debug_diag_sensors.yaml #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml ######################################################################################### # ESPHome # https://esphome.io/components/esphome.html ######################################################################################### esphome: name: "${device_name}" friendly_name: "${friendly_name}" comment: "${description_comment}" # Appears on the esphome page in HA area: "${device_area}" project: name: "${project_name}" version: "${project_version}" ######################################################################################### # ESP Platform and Framework # https://esphome.io/components/esp32.html ######################################################################################### esp8266: board: esp01_1m early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True. board_flash_mode: dout # Default is dout ######################################################################################### # ESPHome Logging Enable # https://esphome.io/components/logger.html ############################################# logger: level: "${log_level}" #INFO Level suggested, or DEBUG for testing #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM) #esp8266_store_log_strings_in_flash: false #tx_buffer_size: 64 globals: - id: relay2_change_origin_remote type: bool restore_value: no initial_value: "false" ######################################################################################### # STATUS LED # https://esphome.io/components/status_led.html ######################################################################################### status_led: pin: number: GPIO2 inverted: yes ######################################################################################### # BINARY SENSORS # https://esphome.io/components/binary_sensor/ ######################################################################################### binary_sensor: - platform: gpio pin: number: GPIO16 mode: INPUT inverted: True use_interrupt: false # This pin doesn't support interrupts so use polling. Only supresses a warning. name: "Button 1: ${switch_1_name}" on_press: - switch.toggle: Relay_1 - platform: gpio pin: number: GPIO05 mode: INPUT inverted: True name: "Button 2: ${switch_2_name}" on_press: - switch.toggle: Relay_2 text_sensor: - platform: mqtt_subscribe id: remote2_status topic: "${mqtt_remote_status_topic}" on_value: then: - if: condition: lambda: |- return x == "${mqtt_remote_device_command_ON}"; then: - if: condition: not: switch.is_on: Relay_2 then: - lambda: |- id(relay2_change_origin_remote) = true; - switch.turn_on: Relay_2 - if: condition: lambda: |- return x == "${mqtt_remote_device_command_OFF}"; then: - if: condition: switch.is_on: Relay_2 then: - lambda: |- id(relay2_change_origin_remote) = true; - switch.turn_off: Relay_2 ######################################################################################### # SWITCH COMPONENT # https://esphome.io/components/switch/ ######################################################################################### switch: - platform: gpio name: "Relay 1: ${switch_1_name}" pin: GPIO13 id: Relay_1 - platform: gpio name: "Relay 2: ${switch_2_name}" pin: GPIO12 id: Relay_2 on_turn_on: - if: condition: lambda: 'return !id(relay2_change_origin_remote);' then: - mqtt.publish: topic: "${mqtt_remote_command_topic}" payload: "${mqtt_remote_device_command_ON}" - lambda: 'id(relay2_change_origin_remote) = false;' on_turn_off: - if: condition: lambda: 'return !id(relay2_change_origin_remote);' then: - mqtt.publish: topic: "${mqtt_remote_command_topic}" payload: "${mqtt_remote_device_command_OFF}" - lambda: 'id(relay2_change_origin_remote) = false;'