########################################################################################## ########################################################################################## # LOUNGE WEST SWITCH (Single Switch from entranceway) # V4.0 2025-10-04 Copy from other device ########################################################################################## # Zemismart KS-811 Single push button # pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/ # # NOTES # - # ########################################################################################## ########################################################################################## ########################################################################################## # SPECIFIC DEVICE VARIABLE SUBSTITUTIONS # If NOT using a secrets file, just replace these with the passwords etc (in quotes) ########################################################################################## substitutions: # Device Naming device_name: "esp-loungewestswitch" friendly_name: "Lounge West Single Switch (1)" description_comment: "Main Lounge from entranceway lightswitch using a Zemismart KS-811 Single Push Button. Main Lights (1)" device_area: "Lounge" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. # Project Naming project_name: "Zemismart Technologies.KS-811 Single" # Project Details project_version: "v4.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version # Passwords & Secrets api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names static_ip_address: !secret esp-loungewestswitch_ip #mqtt_command_main_topic: !secret mqtt_local_command_main_topic #mqtt_status_main_topic: !secret mqtt_local_status_main_topic # Device Settings log_level: "DEBUG" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE update_interval: "60s" # update time for for general sensors etc # MQTT LOCAL Controls #mqtt_device_name: "lounge-north-switch" #mqtt_local_command_topic: "${mqtt_command_main_topic}/${mqtt_device_name}" # Topic we will use to command this locally without HA #mqtt_local_status_topic: "${mqtt_status_main_topic}/${mqtt_device_name}" # Topic we will use to view status locally without HA # MQTT REMOTE Controls #mqtt_remote_device_name: "lounge-main-lights" #mqtt_remote_device_command_topic: "${mqtt_command_main_topic}/${mqtt_remote_device_name}" #mqtt_remote_status_topic: "${mqtt_status_main_topic}/${mqtt_remote_device_name}" # Topic we will use to view status locally without HA #mqtt_remote_device_command_on: "On" #mqtt_remote_device_command_off: "Off" # Switch/Relay/Button Naming & Icons switch_1_name: "Main Lights" # NOTE there is no physical connection to the lights on this switch, it is connected to the dimmer ESPhome for the pelmet lights ######################################################################################### # PACKAGES: Included Common Packages # https://esphome.io/components/packages.html ########################################################################################## packages: #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode #### common_wifi: !include file: common/network_common.yaml vars: local_device_name: "${device_name}" local_static_ip_address: "${static_ip_address}" local_ota_pass: "${ota_pass}" #### HOME ASSISTANT API (choose encryption or no encryption options) #### common_api: !include file: common/api_common.yaml #file: common/api_common_noencryption.yaml vars: local_api_key: "${api_key}" #### MQTT #### common_mqtt: !include file: common/mqtt_common.yaml vars: local_device_name: "${device_name}" #### WEB PORTAL #### #common_webportal: !include common/webportal_common.yaml #### SNTP (Only use if you want/need accurate timeclocks) #### #common_sntp: !include common/sntp_common.yaml #### DIAGNOSTICS Sensors #### diag_basic: !include common/include_basic_diag_sensors.yaml diag_more: !include common/include_more_diag_sensors.yaml #diag_debug: !include common/include_debug_diag_sensors.yaml #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml ######################################################################################### # ESPHome # https://esphome.io/components/esphome.html ######################################################################################### esphome: name: "${device_name}" friendly_name: "${friendly_name}" comment: "${description_comment}" # Appears on the esphome page in HA area: "${device_area}" project: name: "${project_name}" version: "${project_version}" api: on_client_connected: then: - logger.log: level: INFO format: "API connected: applying override (override=%s)" args: ['id(ha_loss_override).state ? "true" : "false"'] - if: condition: switch.is_on: ha_loss_override then: - switch.turn_on: Relay_1 else: - switch.turn_off: Relay_1 on_client_disconnected: then: - logger.log: level: WARN format: "API disconnected: switching to manual/offline behavior" ######################################################################################### # ESP Platform and Framework # https://esphome.io/components/esp32.html ######################################################################################### esp8266: board: esp01_1m early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True. board_flash_mode: dout # Default is dout ######################################################################################### # ESPHome Logging Enable # https://esphome.io/components/logger.html ######################################################################################### logger: level: "${log_level}" #INFO Level suggested, or DEBUG for testing #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM) #esp8266_store_log_strings_in_flash: false #tx_buffer_size: 64 ######################################################################################### # STATUS LED # https://esphome.io/components/status_led.html ######################################################################################### status_led: pin: number: GPIO02 inverted: yes ######################################################################################### # BINARY SENSORS # https://esphome.io/components/binary_sensor/ ######################################################################################### binary_sensor: - platform: gpio pin: number: GPIO0 mode: INPUT inverted: True name: "Button 1: ${switch_1_name}" on_multi_click: # --- Double click: send "Night Light" (only if HA connected). --- - timing: - ON for at most 0.5s - OFF for at most 0.5s - ON for at most 0.5s - OFF for at least 0.2s then: - if: condition: api.connected: then: - homeassistant.service: service: script.lounge_set_scene data: scene_name: "Night Light" - logger.log: level: INFO format: "BTN: Double click → Scene Night Light" else: - logger.log: level: INFO format: "BTN: Double click ignored (no HA connection)" # --- Single short click --- # Online (and override ON): use HA's last scene to decide. # If last != "All Off" → send "All Off" # If last == "All Off" → send "Bright" # Offline (and override ON): toggle physical Relay_1 - timing: - ON for at most 0.5s - OFF for at least 0.5s then: - if: condition: and: - switch.is_on: ha_loss_override - api.connected: then: - if: condition: lambda: |- // Defensive: treat empty/unknown as "not All Off" so we go to a safe "All Off". auto s = id(ha_last_scene).state; if (s.empty() || s == "unknown" || s == "unavailable") return true; return s != "All Off"; then: - homeassistant.service: service: script.lounge_set_scene data: scene_name: "All Off" - logger.log: level: INFO format: "BTN: Single click (online) → Last scene was not 'All Off' → Set 'All Off'" else: - homeassistant.service: service: script.lounge_set_scene data: scene_name: "Bright" - logger.log: level: INFO format: "BTN: Single click (online) → Last scene was 'All Off' → Set 'Bright'" else: # OFFLINE path: only act if override ON; toggle physical relay - if: condition: and: - switch.is_on: ha_loss_override - not: api.connected: then: - if: condition: lambda: 'return id(Relay_1).state;' then: - switch.turn_off: Relay_1 - logger.log: level: INFO format: "BTN: Single click (offline) → Relay_1 OFF" else: - switch.turn_on: Relay_1 - logger.log: level: INFO format: "BTN: Single click (offline) → Relay_1 ON" else: - logger.log: level: INFO format: "BTN: Single click ignored (override OFF)" # --- Long hold: ON for at least 4s (only if HA connected) --- - timing: - ON for at least 4s then: - if: condition: api.connected: then: - homeassistant.service: service: script.lounge_set_scene data: scene_name: "All Off" - homeassistant.event: event: esphome.lounge_switch_hold data: action: "hold" - logger.log: level: INFO format: "BTN: Long press → Scene All Off + HA event (hold)" else: - logger.log: level: INFO format: "BTN: Long press ignored (no HA connection)" ######################################################################################### # TEXT SENSOR COMPONENT # ######################################################################################### text_sensor: - platform: homeassistant id: ha_last_scene entity_id: input_text.lounge_last_scene # logging: helpful when testing on_value: - logger.log: level: DEBUG format: "HA last scene now: %s" args: ["x.c_str()"] ######################################################################################### # SWITCH COMPONENT # https://esphome.io/components/switch/ ######################################################################################### switch: # GPIO13 for KS-811 first button UNLESS it is KS-811-1 then it is GPIO12 - platform: gpio name: "Relay 1: ${switch_1_name}" pin: GPIO12 id: Relay_1 restore_mode: RESTORE_DEFAULT_ON # HA Loss manual override (default ON; persists across restarts) - platform: template name: "HA Loss manual override" id: ha_loss_override optimistic: true restore_mode: RESTORE_DEFAULT_ON