########################################################################################## ########################################################################################## # MAIN BATHROOM LIGHTSWITCH 2 (OBK Converted, BK7231N) # V2.0 2026-02-04 Reflash into new switch (old switch electrical failure, now a BK) # V1.0 2025-11-23 Initial ########################################################################################## # Zemismart KS-811 Triple push button # pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/ # # NOTES # - # ########################################################################################## ########################################################################################## ########################################################################################## # SPECIFIC DEVICE VARIABLE SUBSTITUTIONS # If NOT using a secrets file, just replace these with the passwords etc (in quotes) ########################################################################################## substitutions: # Device Naming device_name: "esp-mainbathroomlights" friendly_name: "Main Bathroom Lightswitch (3)" description_comment: "BK7231N - Main Bathroom Lightswitch using a Zemismart KS-811 Triple Push Button. Main Lights (1), Shower Lights (2), Cabinet Lights (3)" device_area: "Main Bathroom" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. # Project Naming project_name: "Zemismart Technologies.KS-811 Triple BK7231N" # Project Details project_version: "v1.0" # Project V denotes release of yaml file, allowing checking of deployed vs latest version # Passwords api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names static_ip_address: !secret esp-garageentrylights2_ip # Device Settings log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE update_interval: "60s" # update time for for general sensors etc # Default relay restore mode # Options: RESTORE_DEFAULT_OFF, RESTORE_DEFAULT_ON, ALWAYS_ON, ALWAYS_OFF relay_restore_mode: "RESTORE_DEFAULT_OFF" # Switch Naming switch_1_name: "Main Lights" # Only one light (Garage Side) actually connected to this relay switch_2_name: "Shower Lights" # Output for pario string hanging lights switch_3_name: "Cabinet Lights" # This is virtual only, no power connected to 3rd relay ########################################################################################## # PACKAGES: Included Common Packages # https://esphome.io/components/packages.html ########################################################################################## packages: #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode #### common_wifi: !include file: common/network_common.yaml vars: local_device_name: "${device_name}" local_static_ip_address: "${static_ip_address}" local_ota_pass: "${ota_pass}" #### HOME ASSISTANT API (choose encryption or no encryption options) #### common_api: !include file: common/api_common.yaml #file: common/api_common_noencryption.yaml vars: local_api_key: "${api_key}" #### MQTT #### common_mqtt: !include file: common/mqtt_common.yaml vars: local_device_name: "${device_name}" #### WEB PORTAL #### #common_webportal: !include common/webportal_common.yaml #### SNTP (Only use if you want/need accurate timeclocks) #### #common_sntp: !include common/sntp_common.yaml #### DIAGNOSTICS Sensors #### diag_basic: !include common/include_basic_diag_sensors.yaml #diag_more: !include common/include_more_diag_sensors.yaml #diag_debug: !include common/include_debug_diag_sensors.yaml #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml # Package item removals wifi: min_auth_mode: !remove # The WPA2 only works on esp32/8266 reboot_timeout: 15min # override the selection from from the common package fast_connect: false # (optional) force off, in case package vars change mqtt: keepalive: 15s # overriding the value from the common package ########################################################################################## # ESPHome # https://esphome.io/components/esphome.html ########################################################################################## esphome: name: "${device_name}" friendly_name: "${friendly_name}" comment: "${description_comment}" # Appears on the esphome page in HA area: "${device_area}" project: name: "${project_name}" version: "${project_version}" # on_boot: # priority: 200 # then: # - switch.turn_on: Relay_3 ########################################################################################## # BUILD FOR BK CHIPSET # bk72xx # https://devices.esphome.io/board/bk72xx/ ########################################################################################## bk72xx: board: generic-bk7231n-qfn32-tuya ########################################################################################## # ESP Platform and Framework # https://esphome.io/components/esp32.html ########################################################################################## #esp8266: # board: esp01_1m # early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True. # board_flash_mode: dout # Default is dout ########################################################################################## # ESPHome Logging Enable # https://esphome.io/components/logger.html ########################################################################################## logger: level: "${log_level}" #INFO Level suggested, or DEBUG for testing baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM) id: logger_id ########################################################################################## # STATUS LED # https://esphome.io/components/status_led.html ########################################################################################## status_led: pin: number: P22 #GPIO22 inverted: true ########################################################################################## # BINARY SENSORS # https://esphome.io/components/binary_sensor/ ########################################################################################## binary_sensor: - platform: gpio pin: number: P17 mode: input: true pullup: true inverted: true name: "Button 1: ${switch_1_name}" on_press: - delay: 50ms - switch.toggle: Relay_2 #(FIX shoud be relay 1) - platform: gpio pin: number: P26 mode: input: true pullup: true inverted: true name: "Button 2: ${switch_2_name}" on_press: - delay: 50ms - switch.toggle: Relay_2 - platform: gpio pin: number: P24 mode: input: true pullup: true inverted: true name: "Button 3: ${switch_3_name}" on_press: - delay: 50ms #- switch.turn_off: Relay_1 - switch.turn_off: Relay_2 - switch.turn_off: Relay_3 ########################################################################################## # SWITCH COMPONENT # https://esphome.io/components/switch/ ########################################################################################## switch: - platform: gpio name: "Relay 1: ${switch_1_name}" pin: P14 #GPIO14 id: Relay_1 restore_mode: ${relay_restore_mode} on_turn_on: - switch.turn_on: Relay_2 - switch.turn_on: Relay_3 - platform: gpio name: "Relay 2: ${switch_2_name}" pin: P16 #GPIO16 id: Relay_2 restore_mode: ${relay_restore_mode} - platform: gpio name: "Relay 3: ${switch_3_name}" pin: P15 #GPIO15 id: Relay_3 restore_mode: ${relay_restore_mode} ########################################################################################## # TEMPLATE COMPONENT # ########################################################################################## # Virtual group switch for Home Assistant - platform: template name: "All Main Bathroom Lights" id: all_main_bathroom_lights optimistic: false restore_mode: RESTORE_DEFAULT_OFF lambda: |- return id(Relay_1).state || id(Relay_2).state || id(Relay_3).state; turn_on_action: - switch.turn_on: Relay_2 turn_off_action: #- switch.turn_off: Relay_1 - switch.turn_off: Relay_2 - switch.turn_off: Relay_3