#############################################
#############################################
# DOWNSTAIRS KITCHEN MAIN LIGHTSWITCH 
# V1.0 2025-03-28 Initial Version
#############################################
# Zemismart KS-811 Triple push button
# pinout/schematic https://community.home-assistant.io/t/zemismart-ks-811-working-with-esphome/
#
# NOTES
# - 
#
#############################################
#############################################

#############################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#############################################
substitutions:
  devicename: "esp-downstkitchlights"
  friendly_name: "Downstairs Kitchen Lightswitch (3)"
  description_comment: "Downstairs Kitch Main Lightswitch using a Zemismart KS-811 Triple Push Button. Dining Light (1), Kitchen Light (2), Extract Fan (3)"
  api_key: !secret esp-downstkitchlights_api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-downstkitchlights_ota_pass # unfortunately you can't use substitutions inside secrets names
  static_ip_address: !secret esp-downstkitchlights_ip
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc
  room: "Downstairs Kitchen" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  

#############################################
# Included Common Packages
# https://esphome.io/components/esphome.html
#############################################
packages:
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_static_ip_address: ${static_ip_address}
      local_ota_pass: ${ota_pass}
  common_api: !include
    file: common/api_common.yaml
    vars:
      local_api_key: ${api_key}
#  common_webportal: !include
#    file: common/webportal_common.yaml
  common_mqtt: !include
    file: common/mqtt_common.yaml
  common_sntp: !include
    file: common/sntp_common.yaml
  common_general_sensors: !include
    file: common/sensors_common.yaml
    vars:
      local_friendly_name: ${friendly_name}
      local_update_interval: ${update_interval}

#  common_multiclick_pushbutton_Switch_2: !include
#    file: common/multiclick_pushbutton_common.yaml
#    vars:
#      local_name: "Button: Light Switch 2 (Cabinet)"
#      local_gpio: GPIO05 # Switch 2 for KS-811 Triple is GPIO5
#      local_relay_id: Relay_2 # ID of relay to turn on
#      local_singleclick_duration: 7200000   # 2 hrs in ms
#  common_multiclick_pushbutton_Switch_3: !include
#    file: common/multiclick_pushbutton_common.yaml
#    vars:
#      local_name: "Button: Extract Fan"
#      local_gpio: GPIO04 # Switch 3 for KS-811 Triple is GPIO4
#      local_relay_id: Relay_3 # ID of relay to turn on
#      local_singleclick_duration:  300000   # 5 minutes in ms
#      local_doubleclick_duration: 1800000   # 30 minutes in ms
#      local_tripleclick_duration: 7200000   # 2 hours in ms    
  
#############################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
esphome:
  name: ${devicename}
  friendly_name: ${friendly_name}
  comment: ${description_comment} #Appears on the esphome page in HA
  area: ${room}

#############################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#############################################
esp8266:
  board: esp01_1m

#############################################    
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
############################################# 
logger:
  level: ${log_level}  #INFO Level suggested, or DEBUG for testing
  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  #esp8266_store_log_strings_in_flash: false
  #tx_buffer_size: 64

#############################################
# STATUS LED
# https://esphome.io/components/status_led.html
#############################################
status_led:
  pin:
    number: GPIO2
    inverted: yes

#############################################
# BINARY SENSORS
# https://esphome.io/components/binary_sensor/
#############################################
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO16
      mode: INPUT
      inverted: True
    name: "Button 1: Light Switch 1 (Dining)"
    on_press:
      - switch.toggle: Relay_1

  - platform: gpio
    pin:
      number: GPIO05
      mode: INPUT
      inverted: True
    name: "Button 2: Light Switch 2 (Kitchen)"
    on_press:
      - switch.toggle: Relay_2

  - platform: gpio
    pin:
      number: GPIO4
      mode: INPUT
      inverted: True
    name: "Button 3: Switch 3 (Extract)"
    on_press:
      - switch.toggle: Relay_3

#############################################
# SWITCH COMPONENT
# https://esphome.io/components/switch/
#############################################
switch:
  - platform: gpio
    name: "Relay 1: Dining Light"
    pin: GPIO13
    id: Relay_1
  - platform: gpio
    name: "Relay 2: Kitchen Light"
    pin: GPIO12
    id: Relay_2
  - platform: gpio
    name: "Relay 3: Extract Fan"
    pin: GPIO14
    id: Relay_3