#:########################################################################################:#
# TITLE: GARAGE ENTRANCE BLUETOOTH PROXY
# zorruno.com layout v1.1 2026
#:########################################################################################:#
# REPO:
# https://home.fox.co.nz/gitea/zorruno/zorruno-homeassistant/src/branch/master/esphome/esp-garagebtproxy.yaml
#:########################################################################################:#
# VERSIONS:
# V1.1 2026-03-11 Updated yaml to zorruno layout V1.1
# V1.0 2025-06-14 Initial Version
#:########################################################################################:#
# HARDWARE:
# - ESP32-WROOM (esp32dev)
# - Bluetooth Proxy (ESPHome bluetooth_proxy + esp32_ble_tracker)
#:########################################################################################:#
# OPERATION NOTES:
# - Provides Bluetooth Proxy coverage at the garage entrance for Home Assistant
# - Uses ESP-IDF framework for BLE stability/performance
#:########################################################################################:#
# OFFLINE NOTES:
# a) Home Assistant OFFLINE, but Network and MQTT ONLINE
#    - BLE proxy is unavailable to Home Assistant until HA returns
# b) MQTT OFFLINE (but WiFi/Network and HA API ONLINE)
#    - BLE proxy still works via Home Assistant API
# c) Entire WiFi/Network OFFLINE
#    - BLE proxy unavailable until network returns
#    - Accurate time is not needed (SNTP not required)
#:########################################################################################:#


#:########################################################################################:#
# SUBSTITUTIONS: Specific device variable substitutions
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#:########################################################################################:#
substitutions:
  # Device Naming
  device_name: "esp-garagebtproxy"
  friendly_name: "Garage Entrance Bluetooth Proxy"
  description_comment: "ESP32-WROOM garage entrance with BT Proxy (Layout V1.1)"
  device_area: "Garage" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.

  # Project Naming
  project_name: "ESPHome.Bluetooth Proxy"
  project_version: "v1.1"

  # Passwords & Secrets
  api_key: !secret esp-api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-ota_pass # unfortunately you can't use substitutions inside secrets names
  static_ip_address: !secret esp-garagebtproxy_ip # unfortunately you can't use substitutions inside secrets names

  # If we are changing IP addresses, you must update the current IP address here, otherwise it remains
  # Don't forget to switch it back when changed.
  current_ip_address: ${static_ip_address}

  # Device Settings
  log_level: "INFO" # NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for general sensors etc


#:########################################################################################:#
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
#:########################################################################################:#
packages:
  #### WIFI, Network (Static/DHCP/IPV6 etc), Fallback AP, Safemode ####
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"
      local_current_ip_address: "${current_ip_address}"

  #### HOME ASSISTANT API (choose encryption or no encryption options) ####
  common_api: !include
    file: common/api_common.yaml
    #file: common/api_common_noencryption.yaml
    vars:
      local_api_key: "${api_key}"

  #### MQTT ####
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"

  #### SNTP (Only use if you want/need accurate timeclocks) ####
  common_sntp: !include common/sntp_common.yaml

  #### DIAGNOSTICS Sensors ####
  diag_basic: !include common/include_basic_diag_sensors.yaml
  diag_more: !include common/include_more_diag_sensors.yaml
  #diag_debug: !include common/include_debug_diag_sensors.yaml
  #diag_resetcount: !include common/include_resetcount_diag_sensors.yaml


#:########################################################################################:#
# ESPHOME:
# https://esphome.io/components/esphome.html
#:########################################################################################:#
esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}
  comment: ${description_comment} # appears on the esphome page in HA
  area: ${device_area}
  min_version: 2024.6.0
  project:
    name: ${project_name}
    version: ${project_version}


#:########################################################################################:#
# ESP PLATFORM AND FRAMEWORK:
# https://esphome.io/components/esp32.html
#:########################################################################################:#
esp32:
  board: esp32dev
  framework:
    #type: arduino
    type: esp-idf
    version: recommended
    advanced:
      minimum_chip_revision: "3.1"


#:########################################################################################:#
# LOGGING:
# https://esphome.io/components/logger.html
#:########################################################################################:#
logger:
  level: ${log_level}


#:########################################################################################:#
# BLUETOOTH:
# https://esphome.io/components/bluetooth_proxy.html
# https://esphome.io/components/esp32_ble_tracker.html
#:########################################################################################:#
bluetooth_proxy:
  active: true

esp32_ble_tracker:
  scan_parameters:
    active: true