#############################################
#############################################
# LAUNDRY ENVIRONMENT - SONOFF DEV
# V1.0 2025-03-28 Initial Version
#############################################
# Sonoff Dev
# https://wiki.iteadstudio.com/Sonoff_DEV
#
# NOTES
# - 
#
#############################################
#############################################

#############################################
# SPECIFIC DEVICE VARIABLE SUBSTITUTIONS
# If NOT using a secrets file, just replace these with the passwords etc (in quotes)
#############################################
substitutions:
  device_name: "esp-laundryenv" # Reference name for the device in the system.
  project_name: "Sonoff Technologies.Sonoff DEV" # Project Details 
  project_version: "v1"  # Project V denotes release of yaml file, allowing checking of deployed vs latest version
  entity_prefix: "Laundry" # Simple device name where we want to prefix a sensor or switch, eg "Load" Current. 
  friendly_name: "Laundry Environment"
  description_comment: "Laundry Environment Sensor, PIR and Smoke Detector using Sonoff DEV"
  device_area: "Laundry" # Allows ESP device to be automatically linked to an 'Area' in Home Assistant.  
  api_key: !secret esp-laundryenv_api_key # unfortunately you can't use substitutions inside secrets names
  ota_pass: !secret esp-laundryenv_ota_pass # unfortunately you can't use substitutions inside secrets names
  static_ip_address: !secret esp-laundryenv_ip
  log_level: "INFO" # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  update_interval: "60s" # update time for for general sensors etc

##########################################################################################
# PACKAGES: Included Common Packages
# https://esphome.io/components/packages.html
##########################################################################################
packages:
  common_wifi: !include
    file: common/network_common.yaml
    vars:
      local_device_name: "${device_name}"
      local_static_ip_address: "${static_ip_address}"
      local_ota_pass: "${ota_pass}"
  common_api: !include
    file: common/api_common.yaml
    vars:
      local_api_key: "${api_key}"
  #common_webportal: !include
  #  file: common/webportal_common.yaml
  common_mqtt: !include
    file: common/mqtt_common.yaml
    vars:
      local_device_name: "${device_name}"
  common_sntp: !include
    file: common/sntp_common.yaml
  common_general_sensors: !include
    file: common/sensors_common.yaml
    vars:
      local_friendly_name: "${friendly_name}"
      local_update_interval: "${update_interval}"

#############################################
# ESPHome
# https://esphome.io/components/esphome.html
#############################################
esphome:
  name: "${device_name}"
  friendly_name: "${friendly_name}"
  comment: "${description_comment}" # Appears on the esphome page in HA
  area: "${device_area}"
  project:
    name: "${project_name}"
    version: "${project_version}"

#############################################
# ESP Platform and Framework
# https://esphome.io/components/esp32.html
#############################################
esp8266:
  board: esp01_1m
  early_pin_init: False # Initialise pins early to known values. Recommended false where switches are involved. Defaults to True.
  board_flash_mode: dout # Default is dout

#############################################    
# ESPHome Logging Enable
# https://esphome.io/components/logger.html
############################################# 
logger:
  level: ${log_level}  #INFO Level suggested, or DEBUG for testing
  #baud_rate: 0 #set to 0 for no logging via UART, needed if you are using it for other serial things (eg PZEM)
  #esp8266_store_log_strings_in_flash: false
  #tx_buffer_size: 64

#############################################
# SENSORS
# https://esphome.io/components/binary_sensor/
#############################################
sensor:
  - platform: dht
    pin: GPIO14
    temperature:
      name: ${entity_prefix} Temperature
    humidity:
      name: ${entity_prefix} Humidity
    update_interval: ${update_interval}

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO13
      mode:
        input: true
        pullup: false
    name: ${entity_prefix} PIR
    device_class: motion
    #filters:
     # - invert:

  - platform: gpio
    pin:
      number: GPIO05
      mode:
        input: true
        pullup: true
      inverted: True
    name: ${entity_prefix} Smoke Detector